solutions for the wireless world - Navair Technologies Inc. Wireless

solutions for the wireless world - Navair Technologies Inc. Wireless

SOLUTIONS

FOR THE

WIRELESS WORLD

SOLUTIONS

POUR UN

MONDE SANS-FILS

Your account representative is:

2014

TABLE OF CONTENTS

General Purpose Test and Measurement Instruments

Rohde & Schwarz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Rohde & Schwarz HAMEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11

RF Site Measurement Products

Bird

®

Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14 dBm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

General Dynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17

Bird

®

Technologies Group – TX RX Systems Brand Products . . . . . . . . . . . . . . . . 18-26

RF Site Management Products

Trilogy – RF Cables (PCS, Cellular, Paging Broadcast and Microwave) . . . . . . . . . 27-30

Citel – RF Surge Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32

Telecommunications

Guisys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34

The R&S®RTM:

Turn on, Measure, Done

See signals where others see noise.

Don’t trade signal detail for memory depth.

Find problems that others miss.

Finish your measurements before others get started.

Set up a mask test in seconds.

Look back in time with the history mode.

Fault tolerant with undo/redo.

Virtual Screen: Two screens in one.

Quick access to all functions.

Reliable Results Fast Results Ease-of-use

NEW

Ease of use, quick access to functions, fast and reliable results — this is precisely what oscilloscope users want in their everyday measurement tasks. And the new R&S® RTM2000 bench oscilloscope delivers. The RTM bench oscilloscopes are for everyday use. With a bandwidth of 350MHz or 500MHz it is ideal for your everyday applications. By combining time domain, frequency domain, logic and protocol analysis functions in a single instrument, they can be used for comprehensive testing of most embedded systems in development, production and service.

See our web site for a full catalog: www.navair.com

2

NAVAIR

TECHNOLOGIES

R&S

®

FSH4 / R&S

®

FSH8 / R&S

®

FSH13 / R&S

®

FSH20 Spectrum Analyzer

The R&S

®

FSH4/FSH8/FSH13/FSH20 spectrum analyzer is rugged, handy and designed for use in the field . Its low weight, its simple, well-conceived operation concept and the large number of measurement functions make it an indispensable tool for anyone who needs an efficient measuring instrument for outdoor work

Key Features

• Frequency range from 9 kHz to

3 .6/8/13 .6/20GHz

• High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz))

• 20 MHz demodulation bandwidth for analyzing

LTE signals

• Low measurement uncertainty (< 1 dB)

• Measurement functions for all important measurement tasks related to the startup and maintenance of transmitter systems

• Internal tracking generator and VSWR bridge with built-in DC voltage supply (bias)

• Two-port network analyzer

• Rugged, splash-proof housing for rough work in the field

• Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys

• Easy operation thanks to user configurable, automatic test sequences (wizard)

Keep an eye on it.

The R&S

®

FSL Spectrum Analyzer: to see it is to want it.

The R&S

®

FSL is an extremely lightweight and compact spectrum analyzer that is ideal for a large number of applications in development, service and production .

Despite its compact size, it offers a wealth of functions more typical of the highend range, thus ensuring an excellent price/performance ratio . The R&S

®

FSL is the only instrument in its class that features a tracking generator up to

18 GHz and can analyze signals with a bandwidth of 28 MHz . In addition, the

R&S

®

FSL18, which operates at frequencies up to 18 GHz, supports applications in the microwave range .

• FSL-K93 (option) WiMAX Application Firmware for spectrum and modulation measurements on stationary and mobile WiMAX signals.

• 9 Khz to 3, 6 or 18GHz, with or without tracking generator

• Best performance in its class: DANL –142 dBm, IP3 typ. +10 dBm, phase noise typ . –103 dBc

• Comprehensive measurement routines: TOI, OBW, Time Domain Power,

CCDF, channel/adjacent channel power

• LAN interface and USB host adapter

• Unique slide-in upgrade design: all hardware options are user-installable without opening the housing

Note: there is one vital accessory for your R&S

®

FSL that we don’t carry . You’ll have to visit the hardware store for that .

See our web site for a full catalog: www.navair.com

3

NAVAIR

TECHNOLOGIES

R&S

®

ZVH Cable and Antenna Analyzer R&S

®

NRP2 Power Meter

Key Features

• Frequency range from 100 kHz to 3.6 GHz or 8 GHz

• 100 dB (typ.) dynamic range for filter and antenna isolation measurements

• Built-in DC voltage supply (bias) for active components such as amplifiers

• Power meter option

• Saving of measurement results on SD memory card or USB memory stick

• Easy operation with user-configurable test sequences (wizard)

• Easy-to-replace Li-ion battery for up to 4.5 h of operation

• Rugged, splash-proof housing for rough work in the field

• Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys

R&S

®

CTH100A/R&S

®

CTH200A Portable Radio Test Set

Key Features

• Frequency measurement

• Power measurement

• Over-the-air measurement (R&S

®

CTH200A)

• Distance-to-fault measurement (R&S

®

CTH200A)

• Voice reporting (R&S

®

CTH200A)

Key Features

• Power measurements with a base unit or with cost-efficient USB power sensors alone

• Average, peak and peak-to-average power measurements from DC to

67 GHz

• Versatile USB power sensors with superior performance

• Accurate measurements for GSM/EDGE, 3G, WLAN, WiMAX™, LTE and beyond

• Complex signals with digital modulation are handled as easily as are

CW signals, carriers with analog modulation and pulsed RF

• Solutions for radar and EMC applications

• Ultra-fast statistical analysis

• Flexible use with signal generators, signal analyzers and network analyzers from Rohde & Schwarz

R&S

®

NRP-Z Sensors

R&S

®

ZNC Vector Network Analyzer

Key Features

• Frequency range from 9 kHz to 3 GHz

• Dynamic range of up to 130 dB

• Short sweep times of 11 ms for 401 points

• High temperature stability of typ. 0.01 dB/°C

• Wide power sweep range from –50 dBm to +13 dBm (typ.)

• IF bandwidths from 1 Hz to 300 kHz

• Manual and automatic calibration

• Low trace noise of 0.004 dB RMS at 10 kHz IF bandwidth

• Large, high-resolution 12.1” screen

• Touchscreen user interface

See our web site for a full catalog: www.navair.com

Brief Description

No matter whether you work in the lab or in production – the Microwave

Power Meter R&S

®

NRP is always the right choice. The versatility of the novel Power Meter Series R&S

®

NRP is due to the newly developed sensors . These sensors are intelligent standalone instruments that communicate with the base unit or a PC via a digital interface . The SMART

SENSOR TECHNOLOGY™ now implemented for the first time, sets new standards in terms of universality and accuracy .

Key Features

• Dynamic range: up to 90 dB (sensor dependent)

• Level range: -67 dBm to +45 dBm (sensor dependent)

• Frequency range: DC to 67 GHz (sensor dependent)

• Measurement speed: 1500 measurements per second in the buffered mode

• Linearity uncertainty: 0.0007 dB

• Precise average power measurements irrespective of modulation type and bandwidth

• Flexible measurements on up to 128 time slots per power sensor (26 time slots with base unit)

• Direct USB connection from sensor to a PC

• S parameter correction of components between sensor and test object

• 2 years calibration cycle for base unit as well as for the sensors

4

NAVAIR

TECHNOLOGIES

Analog & Vector Signal Generators

ZVL Vector Network Analyzer

The cost-efficient compact class in network analysis

• Frequency ranges from 9 kHz to 3 GHz/6 GHz/13.6 GHz

• Wide dynamic range: >115 dB, typ. 123 dB

• Bidirectional test set: display of all four S-parameters

• 75 Ω version from 9 kHz to 3 GHz for TV/CATV

• Complete spectrum analyzer as an option

• Compact size and low weight (<7 kg)

• Digital communications standards

• Accurate power measurement (USB connector for R&S

®

NRP-Z power sensor series)

• Compact size and low weight (<7 kg)

• 12 V DC operation and internal battery

• Connection for external monitor

The New Standard of Excellence in Analog Signal Generation

R&S

®

SMA100A

The R&S

®

SMA100A combines superior signal quality with a very high setting speed, making it the ideal generator for any task in development, production, service or maintenance .

Key Features

• Frequency range from 9 kHz to 3 GHz or 6 GHz with or without an electronic attenuator

• CW signal and all common types of analog modulations (AM, FM, φM, PM)

• Very low phase noise

• High power output as standard

• Optional removable mass memory card

Setting Standards in Mid-range

Analog Signal Generation

R&S

®

SMB100A

The R&S

®

SMB100A sets new standards in its class due to its outstanding characteristics . The instrument combines excellent signal quality with very high output power, which makes it ideal for any task .

Key Features

• Wide frequency range from 9 kHz to

1 .1/2 .2/3 .2/6 GHz or from 100 kHz to

12 .75/20/40 GHz

• Excellent signal characteristics with low

SSB phase noise of typ . –128 dBc

(at 1 GHz, 20 kHz offset)

• High output power of typ. up to +27 dBm

• All important analog modulations with AM,

FM/φM and pulse modulation supported

• Compact size with only two height units,

3/4 19” width and low weight

Best Price/Performance Ratio and

Smallest Size in its Class

R&S

®

SMC100A

The R&S

®

SMC100A is the newest analog signal generator that Rohde & Schwarz has to offer . It has a very small size and is priced very attractively to reduce overall total cost of ownership .

Key Features

• Frequency range from 9 kHz to 1.1 GHz or 3 .3 GHz

• Outstanding signal quality

• All analog modulation types and high output power as standard

• Electronic attenuator

• Low phase noise and fast switching time

See our web site for a full catalog: www.navair.com

5

NAVAIR

TECHNOLOGIES

Analog & Vector Signal Generators

Generating Signals for Today and Tomorrow

R&S

®

SMBV100A

The R&S

®

SMBV100A is a state-of-the art vector signal generator that has been designed with a future-proof hardware concept .

Key Features

• Frequency range from 9 kHz to 3.2 GHz or 6 GHz

• Excellent characteristics and high output power as standard

• Wide RF signal bandwidth of up to 120 MHz with internal signal generation

• Maximum supported external RF bandwidth is

500 MHz

• Supports all of the important digital standards available now such as WiMAX, 3GPP and LTE, as well as any future digital standards still in development

Compact, cost-effective measuring receiver

R&S

®

ESL EMI Test Receiver

The R&S

®

ESL EMI test receiver combines two instruments in one, measuring EMC disturbances in accordance with the latest standards and also serving as a full-featured spectrum analyzer for diverse lab applications .

The R&S

®

ESL is the ideal instrument for small budgets .

Key Features

• Frequency range from 9 kHz to 3 GHz or 9 kHz to 6 GHz covering almost all commercial EMC standards

• First-ever combination of an EMI test receiver and spectrum analyzer in the entry-level class

• All major functions of an advanced EMI test receiver, including fully automated test sequences

• Weighting detectors: max./min. peak, average,

RMS, quasi-peak as well as average with meter time constant and rms-average in accordance with the latest version of CISPR 16-1-1

• Compact, lightweight instrument, can be batterypowered for mobile applications

R&S

®

HE300

Active Directional Antenna

20 MHz (optional 9 kHz) to 7.5 GHz

The practical and very wideband R&S

®

HE300 active directional antenna locates transmitters and interference sources when combined with portable receivers (e .g . the R&S

®

PR100) .

Three exchangeable antenna modules that are supplied with the antenna cover the 20 MHz to

7.5 GHz frequency range. An additional module

(R&S

®

HE300HF for 9 kHz to 20 MHz) is available as an option .

The modules can be plugged into the handle with the correct orientation for vertical or horizontal polarization and then mechanically locked in place .

A built-in, low-noise wideband amplifier can be activated to enhance system sensitivity (active mode) .

In passive mode, the amplifier is bypassed so that the R&S

®

HE300 can also be used in the vicinity of strong signal sources .

Key Features

• Unambiguous radiation pattern

• Direction is found by orienting antenna toward maximum field strength

• Very wideband performance in a practical size

• Low weight, due to optimized selection of materials, ensures fatigue-proof handling

• Horizontal and vertical polarization

• Wide dynamic range

• Passive antenna if amplifier is switched off

See our web site for a full catalog: www.navair.com

6

NAVAIR

TECHNOLOGIES

HMO3000 Series Mixed Signal Oscilloscopes

Oscilloscopes

HMO Compact Series

500 MHz | 400 MHz | 300 MHz 200 MHz | 150 MHz | 100 MHz | 70 MHz

4 GSa /s real time, low noise flash A /D converter

8 MPts memory,

oom up to 200,000:1

MSO functionality included as standard

(HO3508/HO3516 logic probe with 8/16 channels required)

Automatically or manually adjustable memory depth

300 MHz | 400 MHz >>> 500 MHz

2 GSa/s real time, low noise flash A/D converter

2 MPts memory,

oom up to 50,000:1

MSO functionality included as standard

(HO3508 logic probe with 8 channels required) and semiconductors

The HMO3000 series is future-proof due to bandwidth upgrade option

HOO352 / 354 and HOO452 / 454

All HMO Oscilloscopes Feature:

E

Elektronik

Product of the Year

2012

HMO1024

No. 1 in Category

Test + Measurement

Vertical sensitivity up to 1 mV/div.

Trigger modes: slope (A/B), pulse width, video, logic, serial buses (optional), hold-off*

S erial bus trigger and hardware accelerated decode incl. list view.

Options: I 2 C + SPI + UART/RS-232 (HOO10/HOO11), CAN + LIN (HOO12)

28 auto-measurement parameters plus statistics, formula editor, ratio cursor

6-digit hardware counter

FFT with up to 64kPts (dBm, dBV, V rms

)

Pass/fail test based on masks

Automatic search for user-defined events

Display: 12 div. x-Axis, 20 div. y-Axis

(VirtualScreen)

*HMO3000 models only

HMO series at a glance:

Bandwidth

Model: 4 channel

2 channel

Sampling rate (per analog channel)

Maximum sampling rate

Memory depth per channel

Maximum memory

Max number of logic channels

Input impedance

V/div. @ 1 MΩ

V/div. @ 50 Ω

DC-offset

Component tester

500 MHz

HMO3054

HMO3052

HMO3000 Series

400 MHz

HMO3044

HMO3042

2 GSa/s

4 GSa/s

4 MPts.

8 MPts.

16

1 MΩ / 50 Ω

1 mV/div. to 5 V/div.

1 mV/div. to 1 V/div.

± 0,2V to ± 50V

300 MHz

HMO3034

HMO3032

See our web site for a full catalog: www.navair.com

7

*HMO300x, HMO202x, HMO152x only

HMO Compact Series

200 MHz

HMO2024

HMO2022

150 MHz

HMO1524

HMO1522

100 MHz

HMO1024

HMO1022

1 GSa/s

2 GSa/s

1 MPts.

2 MPts.

8

1 MΩ / 50 Ω

1 mV/div. to 10 V/div.

1 mV/div. to 1 V/div.

± 0,2V to ± 100V

1 MΩ n/a

70 MHz

HMO724

HMO722

*

NAVAIR

TECHNOLOGIES

Spectrum Analysis

HMS-X Spectrum Analyzer

1.6 GHz | 3 GHz

1 Basic Unit + 3 Options =

Your HMS Spectrum Analyzer

q

Frequency range: 100 kHz to 1.6 GHz/3 GHz

*1 q

Spectral purity greater than -100 dBc/Hz (at 100 kHz) q

SWEEP from 20 ms to 1000 s q

Detectors: auto-, min-/max.-peak, sample, RMS, average, quasi-peak

*2 q

Miscellaneous marker/Δmarker and peak functions q

Tracking generator

*3

Frequency range: 5 MHz to 1.6 GHz/3 GHz

*1

Output level: -20 dBm to 0 dBm q

Directly export data to USB flash drive, RS-232/USB dual interface for remote control q

Fanless design and fast boot time

*1 with HMS-3G (HV212) option

*2 with HMS-EMC (HV213) option

*3 with HMS-TG (HV211) option

HMS-X series model overview

Amplitude measurement range

DANL

Resolution bandwidth

Video bandwidth

EMC precompliance set 1 GHz HMS-SET1

The EMC precompliance set HMS-SET1 includes all necessary instruments to analyse typical EMC problems. This set contains a spectrum analyzer

HMS-X incl. HMS-EMC option, a probe set HZ530, the HM6050-2 LISN for line conducted measurements and the HMExplorer software for EMC precompliance measurements.

HMS-X with EMC option

-114 dBm to +20 dBm typ . -135 dBm

100 Hz to 1 MHz, 200 kHz (-3 dB),

200 Hz, 9 kHz, 120 kHz, 1 MHz (-6 dB)

10 Hz to 1 MHz

HMS-X incl . HMS-EMC option

+

EMC precompliance set 3 GHz HMS-SET2

The EMC precompliance set HMS-SET2 includes all necessary instruments to analyse typical EMC problems. This set contains a spectrum analyzer

HMS-X incl. HMS-EMC and HMS-3G option, a probe set HZ540, the HM6050-2 LISN for line conducted measurements and the HMExplorer software for EMC precompliance measurements.

+

HMS-X incl . HMS-EMC and HMS-3G option

One HMS-X basic unit and three options allow you to configure an instrument that best fits your needs

HMS-TG

This option activates the tracking generator in the instrument.

HMS-3G

The frequency range is increased from 1.6 GHz to 3 GHz with this option.

HMS-EMC

This option activates all the functions that are required for EMC precompliance measurements. The preamplifier option has been integrated into the new HMS EMC option.

You can easily upgrade all three available options at any later point in time with option upgrade vouchers.

HMS-X basic unit

-104 dBm to +20 dBm typ . -104 dBm

10 kHz to 1 MHz, 200 kHz (-3 dB)

1 kHz to 1 MHz

HZ530 1GHz

HZ540 3 GHz

+

+

HM6050-2

HM6050-2

See our web site for a full catalog: www.navair.com

8

NAVAIR

TECHNOLOGIES

Mainframe

HM8001-2

4 ¾-Digit Programmable

Multimeter

HM8012

LCR Meter

HM8018

Universal Counter 1.6 GHz

HM8021-4

Function Generator 10 MHz

HM8030-6

Tripple Power Supply

HM8040-3

Blank Module

HM800

12 HAMEG INSTRUMENTS | Product Overview

Key facts

❙ Basic unit for modules of the modular system series 8000

❙ Power supply for 2 modules

❙ DC voltages electronically regulated, floating and  short-circuit proof

❙ Power transformer with thermal fuse

❙ Up to 5 mainframes can be stacked

4 BNC connectors option HO801

4 BNC connectors on the rear panel  of the HM8001-2 allow signal transmission to or from HM8021-4 and HM8030-6 modules

Key facts

❙ 4 ¾-digit display with 50,000 counts

❙ Basic accuracy 0.05 %

❙ Max. resolution: 10 µV, 0.01 dBm, 10 nA, 10 mΩ, 0.1 °C

❙ Offset function/relative value measurement

Key facts

❙ Measurement functions: L, C, R, Θ, Q/D, |Z| 

❙ Basic accuracy 0.2 %

❙ 5 measurement frequencies:

100 Hz, 120 Hz, 1 kHz, 10 kHz, 25 kHz

Key facts

❙ Measurement range 0 Hz to 1.6 GHz

❙ 10 MHz time base with 1 ppm stability (TCXO)

❙ Input A: input impedance 1 MΩ, sensitivity 20 mV rms

Input C: input impedance 50 Ω, sensitivity 30 mV rms

8-digit resolution for 10 s measuring time

Key facts

❙ Frequency range 50 mHz to10 MHz, output voltage up to 10 V pp

 (into 50 Ω)

❙ Waveforms: sine wave, triangle, square wave, pulse, DC

❙ Distortion factor <0.5 % up to 1 MHz,  rise and fall time typ. 15 ns

Key facts

❙ 2 x 0 to 20 V/0.5 A | 1 x 5 V/1 A

❙ 3-digit switchable displays (display resolution 0.1 V/1 mA)

❙ Pushbutton to activate / deactivate all outputs

Key facts

❙ Module for customized instrument construction

❙ Guide rails for mounting circuit boards at 4 different levels

❙ Plastic front panel for easy mechanical processing

Power Supplies

Programmable 3[4] Channel

High-Performance Power Supply

HMP4030 [HMP4040]

q

3 x 0…32 V/0…10 A 384 W max.

[4 x 0…32 V/0…10 A 384 W max.] q

384 W Output Power realized by intelligent Power Management q

Low Residual Ripple: <150 μVrms due to linear Post Regulators q

High Setting- and Read-Back Resolution of 1 mV up to 0.2 mA q

Keypad for direct Parameter Entry q

Galvanically isolated, earth-free and short circuit protected Output Channels q

Advanced Parallel- and Serial Operation via V/I Tracking q

EasyArb Function for free definable V/I Characteristics q

FuseLink: Individual Channel Combination of Electronic Fuses q

Free adjustable Overvoltage Protection (OVP) for all Outputs q

All Parameters clearly displayed via LCD/Illuminated Buttons q

Rear Connectors for all Channels including Sense q

USB/RS-232 Interface, optional Ethernet/USB or IEEE-488 (GPIB)

Programmable 2[3] Channel

High-Performance Power Supply

HMP2020 [HMP2030]

q

1 x 0…32 V/0…10 A

[3 x 0…32 V/0…5 A

1 x 0…32 V/0…5 A

188 W max.]

188 W max. q

188 W Output Power realized by intelligent Power Management q

Low Residual Ripple: <150 μVrms due to linear Post Regulators q

High Setting- and Read-Back Resolution of 1 mV up to 0.1 mA q

Galvanically isolated, earth-free and short circuit protected Output Channels q

Advanced Parallel- and Serial Operation via V/I Tracking q

EasyArb Function for free definable V/I Characteristics q

FuseLink: Individual Channel Combination of Electronic Fuses q

Free adjustable Overvoltage Protection (OVP) for all Outputs q

All Parameters clearly displayed via LCD/Illuminated Buttons q

Rear Connectors for all Channels including Sense q

USB/RS-232 Interface, optional Ethernet/USB or IEEE-488 (GPIB)

Triple Power Supply

HM7042-5

q

2 x 0…32 V/0…2 A 1 x 0…5.5 V/0…5 A q

High-Performance and inexpensive Laboratory Power Supply q

Floating, overload and short-circuit proof Outputs q

Separate Voltage and Current Displays for each Output 4 Digits at Channel 1+3; 3 Digits at Channel 2 q

Display Resolution: 10 mV/1 mA at Channel 1+3; 10 mV/10 mA at Channel 2 q

Protection of sensitive Loads by Current Limit or Electronic Fuse q

Pushbutton for activating/deactivating all Outputs q

Low Residual Ripple, high Output Power, very good Regulation q

Parallel (up to 9 A) and Series (up to 69.5 V) Operation q

Temperature-controlled Fan

See our web site for a full catalog: www.navair.com

10

NAVAIR

TECHNOLOGIES

25MHz [50MHz] Arbitrary

Function Generator

HMF2525 [HMF2550]

Programmable Measuring

5 ¾-Digit Digital Multimeter

HMC8012 | HMC8012-G

NEW

q

Frequency Range 10 μHz…25 MHz [50 MHz] q

Output Voltage 5 mVpp…10 Vpp (into 50 Ω) DC Offset ±5 mV…5 V q

Arbitrary Waveform Generator: 250 MSa/s, 14 Bit, 256 kPts q

Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves

(white Noise, Cardiac etc.) q

Total harmonic Distortion 0.04 % (f <100 kHz) q

Burst, Sweep, Gating, external Trigger q

Rise Time <8 ns, in Pulse Mode 8…500 ns Variable-Edge-Time q

Pulse Mode: Frequency Range 100 μHz…12.5 MHz [25 MHz], Pulse Width

15 ns…999 s, Resolution 5 ns q

Modulation Modes AM, FM, PM, PWM, FSK (int. and ext.) q

10 MHz Timebase: ±1 ppm TCXO, rear I/O BNC Connector q

Front USB Connector: Save and Recall of Waveforms and Settings q

8.9 cm (3.5”) TFT: crisp Representation of the Waveform and all Parameters q

USB/RS-232 Dual-Interface, optional Ethernet/USB or IEEE-488 (GPIB)

200kHz LCR-Bridge

HM8118

q

Measurement range: DC to 100 kHz) q

Resolution: 1 μV, 100 nA, 1 mΩ, 1 pF, 1 Hz, 0.1 °C/F q

Basic accuracy: 0.015 % (DC) q

True RMS measurement, AC and AC+DC q

Simultaneous display of three measurement functions, e.g. DC + AC + statistics q

Measurement rate: up to 200 values per second q

Measurement functions: VDC, IDC, RMS, VAC, IAC, frequency, DC power, resistance

(2- and 4-wire), temperature, capacitance, diode and continuity test q

Mathematic functions: limit testing, Min/Max, average, offset, DC power, dB, dBm q

Data logging to internal memory or USB flash drive in .csv-format q

Interfaces: USB-TMC/-VCP, Ethernet, LXI, IEEE-488 (GPIB)* SCPI commands widely compatible with Agilent 34410A

*HMC8012-G only

3GHz Programmable Counter

HM8123

q

Basic Accuracy 0.05 % q

Measurement Functions L, C, R, |Z|, X, |Y|, G, B, D, Q,Θ, Δ, M, N q

Test Frequencies 20 Hz…200 kHz q

Up to 12 Measurements per Second q

Parallel and Series Mode q

Binning Interface HO118 (optional) for automatic Sorting of Components q

Internal programmable Voltage and Current Bias q

Transformer Parameter Measurement q

External Capacitor Bias up to 40 V q

Kelvin Cable and 4-Wire SMD Test Adapter included in Delivery q

Galvanically isolated USB/RS-232 Interface, optional IEEE-488 (GPIB)

See our web site for a full catalog: www.navair.com

11 q

Measurement Range 0 Hz…3 GHz q

2 Measurement Inputs DC…200 MHz, 1 Measurement Input 100 MHz…3 GHz q

Input Impedance A/B: 1 MΩ/50 Ω (switchable), Sensitivity 25 mVrms q

Input Impedance C: 50 Ω, Sensitivity 30 mVrms q

400 MHz Time Base with 0.5 ppm Stability q

10-Digit Resolution at 10 s Gate Time q

9 Measurement Functions, external Gate and Arming q

Input for external Time Base (10 MHz) q

Standard: TCXO (Temperature Stability: ±0.5 x 10-6) Optional: OCXO (Temperature

Stability: ±1 x 10-8) q

Intuitive One-Pushbutton Operation. Each Function directly Addressable q

Galvanically isolated USB/RS-232 Interface, optional IEEE-488 (GPIB)

NAVAIR

TECHNOLOGIES

SignalHawk

tm

SIGNALHAWK

TM

VNA | Spectrum Analyzer with Power Meter Option

MODEL SH-362S: Spectrum Analyzer & 2-Port VNA

MODEL SH-361S: Spectrum Analyzer & 1-Port VNA

MODEL SH-362: 2-Port VNA (1.6MHz-3.6GHz)

MODEL SH-36S: Spectrum Analyzer (100kHz to 3.6GHz)

Bird Technologies SignalHawk

TM

Analyzes radio frequency spectrum.

Measures intended and interfering signals. Allows setup of parameters such as frequency, amplitude, and markers. Graphically displays signal amplitude vs. frequency and saves traces.

KEY FEATURES

• Fast, Accurate, and Sensitive: -42 dB Directivity and-135 dBm Noise Floor

• Large High-Resolution Display: Full Color, Indoor/Outdoor Viewable

• Easy-to-Use: Intuitive Menus, One-Button Setup, and On-Board Help

• Long Battery Life: 5.5 Hours per Charge, Field Replaceable Battery

• Rugged: Drop Tested per Military and European Standards

• USB Connectivity: USB Drive Stores 90,000 Traces

• Spectrogram

• GPS

• Power measurement interface

• Internal Bias – Tee

Model SH-36S SignalHawk

TM

ALSO AVAILABLE

Bird

®

Rack-Mount SignalHawk

TM

Spectrum Analyzer

Model SH-36S-RM: 100kHz to 3.6 GHz

Remotely analyzes the radio frequency spectrum. From your office: measures intended and interfering signals, allows setup of parameters such as frequency and amplitude markers. Also, remotely displays signal amplitude vs. frequency and saves traces to your PC.

Bird

®

PC SignalHawk

Spectrum Analyzer

Model SH-36S-PC: 100kHz to 3.6 GHz

Analyzes the radio frequency spectrum. Measures intended and interfering signals, allows setup of parameters such as frequency and amplitude markers. Also, displays signal amplitude vs. frequency and saves traces on your PC.

WORLDWIDE APPLICATIONS

Cellular, PCS, DCS, 2G, 3G, 4G, CDMA, cdmaOne, CDMA 2000, 1x, 1x EV-DO, GSM, GPRS, EDGE, UMTS, HSDPA,W-CDMA, TDMA,

AMPS 802.11, Bluetooth, Broadcast, Emergency, Fire, GPS, HDTV, IBOC, In-Building, Lab, Microwave, NPSPAC, Paging, Police, Private,

Project 25, Public Safety, Tactical Military, Telematics, Tetra, Trunking, Utilities,WiMAX,WLAN and WLL.

See our web site for a full catalog: www.navair.com

12

NAVAIR

TECHNOLOGIES

Bird

®

Model 5000-XT

Hand-Held Digital Power Meter

The hand-held digital power meter has been completely redesigned with the new Bird

®

5000-XT . Ideally suited for field techs and engineers who need to make power measurements anywhere they go, the 5000-XT’s new user interface has an intuitive, menu-driven design, making it the easiest to use on the market . It’s operable even with one hand and compatible with all our field and legacy sensors .

Bird

®

AT Series

AT-500 & AT800

Antena Testers

AT-500 & AT-800

Antenna Testers

The

Bird AT-Series Antenna Testers provide a cost-effective, fast, graphical way of determining the quality of mobile and base station antennas.

• Rugged, easy-to-use, hand-held design with extended battery life makes it ideal

for use in the field.

• Tests the system in VSWR, Return Loss, Match Efficiency, or Reflection

Coefficient (Rho)

• Single frequency readings and frequency sweeps allow for everything from

pinpointests to system optimization and tuning.

• Can save up to 12 traces for comparison and tracking over time

• RS232 Interface allows communication with a PC for saving traces using

the optional software.

Frequency Characteristics:

Frequency Range AT-500 2 to 520 MHz

AT-800 806 to 960 MHz

Frequency Resolution 20 kHz

Bird

®

General Requirements:

Antenna

Minimize

Downtime

Keep Your Critical

Antenna Sites

Temperature, Storage -40 to +71 C (-40 to +160 F)

Cable Monitor

Compatible with analog or digital cellular and two-way radio systems

Worldwide applications include Tetra, Cellular, PCS and many others

VSWR 1.00 to 100.00

Humidity 95% 5% max (noncondensing)

Compliance Unit complies with MIL-T-28800 Class 5

except for temperature and humidity. Unit is

CE-compliant and RoHS compliant.

• Sensitive to antenna faults that internal transmitter VSWR monitors may not detect

• Local or remote operation via PC software

Test Port:

Ideal for multi-carrier applications

Now available with Ethernet Connectivity!

See our web site for a full catalog: www.navair.com

VSWR 1.25 max

Directivity 32 dB typical

Measurement Speed:

Single Frequency Point 5 readings per second typical

Frequency Sweep 1 sweep per second typical

Accessories:

4240-402 Interseries Adapter, N (M)

4240-403 Interseries Adapter, N (F)

4240-404 Interseries Adapter, BNC (M)

4240-405 Interseries Adapter, BNC (F)

13

4240-408 Interseries Adapter, UHF (M)

4240-409 Interseries Adapter, UHF (F)

4240-410 Interseries Adapter, SMA (M)

4240-411 Interseries Adapter, SMA (F)

NAVAIR

TECHNOLOGIES

Field Strength:

Range 0 to 100%, relative

Sensitivity Fullscale deflection and 0.22 V/m @

400 MHz using supplied antenna

5000-030 Soft Carrying Case for Model 5000-EX

Digital Power Meter and Antenna Tester

(AT) Series

PC Interface:

RS-232 protocol via DB-9 port

Power Requirements:

Power Supply Rechargeable NiCAD battery system.

Unit may be re-chargedwhile operating

using a wall adapter (included)

AC Adapter Input 120/240 Vac

Output 12Vdc, < 400 mA

5000-035 Hard Carrying Case for Model 5000-EX

Digital Power Meter and Antenna Tester

(AT) Series

7000A545 Verification Kit for Model AT-500 Antenna

Tester

7000A845 Verification Kit for Model AT-800 Antenna

Tester

7000A840 PC software used to upload trace data

for analysis, printing or storage.

Bird

®

Wideband Power Sensor

5012B, 5016B, 5017B, 5018B, 5019B

Bird’s

®

Wideband Power Sensor (WPS) never requires field calibration, only requires calibration once per year and is traceable to National Institute of Standards and Technology (NIST). The WPS measures True Average Power, Peak Power, and

Duty Cycle directly with exceptional accuracy and uses these precise measurements to calculate a wide range of other important factors, such as VSWR, Return Loss,

Reflection Coefficient, Crest Factor, Average Burst Power, and CCDF.

PROBLEMS

Downtime is necessary

Have analog, digital, and multi-carrier signals to measure

Tight budgets

Varying field tech skill levels

Need greater confidence in measurement

SOLUTIONS

Monitor and perform maintenance for monitoring while DUT is in-service

Measure forward and reflected power to troubleshoot system failures

Modulation independent measurements

USB connectivity, no meter required

Sensor plugs and plays with 5000-XT meter

No field calibration required

NIST traceable calibration

APPLICATIONS

WPS measures: Analog Cellular, Digital

Cellular, 3G, 4G, Tetra, APCO/P25, Trunking,

CDMA, TDMA, WCDMA, GSM, Transportation,

Tactical Military, Radar, Avionics, Marine, LMR,

Analog Broadcast, Digital Broadcast, GSM,

GPRS, EDGE, UMTS, HSDPA, Bluetooth, Fire,

GPS, NPSPAC, Paging, Project 25, Public

Safety, Telematics, Utilities, WIMAX and WLAN.

Measurements performed: Peak power, true average power and Duty Cycle.

Calculations Performed: VSWR, Return Loss,

Reflection Coefficient, Crest Factor, Average

Burst Power and CCDF.

Bird

®

Site Analyzer XT Series

SA-3600XT (25-3600 MHz)

SA-6000XT (25-6000 MHz)

• One unit covers the entire 25-6000 MHz range!

• Easy to operate and field ready for first-time, occasional and experienced users.

• Other applications include 3G, Broadcast, Government, Tactical Military,

Microwave, Paging, Public Safety, Trunking, WLAN and WLL, and TETRA.

• Color display is clearly visible in direct sunlight.

• With a single download you can view data as Distance to Fault or Measurement

Match-no need to store two traces.

• FDR (Frequency Domain Reflectometry) measurement method results in a highly reliable assessment of the health of critical components in your system; ultimately providing a “heads-up” before a failure occurs.

• Fault location or DTF mode indicates VSWR or Return Loss levels at each point along the cable and antenna system length.

• Cable Loss function measures insertion loss of the cable system over a given frequency range.

APPLICATIONS

Suitable for use in Worldwide Cellular and

PCS/DCSsystems; supporting measurement of CDMA, GSM, TDMA and AMPS modulation schemes.

Other applications include 3G,

Broadcast,Government, Tactical Military,

Microwave, Paging,Public Safety, Trunking,

WLAN and WLL, and TETRA.

• USB communication ports for connection to PC, field sensors and storage devices.

See our web site for a full catalog: www.navair.com

14

NAVAIR

TECHNOLOGIES

Carrier to Noise Generator CNG-70/140

RF Converter Series UDC-172-302-2

APPLICATIONS:

• Bit error rate/SINAD testing

• SATCOM modems

• Channel impairment tests

• Development, qualification, and verification testing

• Manufacturing test

FEATURES:

• C/N, C/No, Eb/No, and C/I modes

• 1 or 2 independent RF channels

• Continuous input power monitoring

• Un-interrupted signal path during calibration cycle

• IEEE-488.2 and RS-232 interface

• Easy to read VFD display

Satellite Link Emulator SLE9000 Series

APPLICATIONS:

• A laboratory workhorse

• Programmable LO for frequency converters

• Frequency hopping source

• RF device characterization

• Tracking generator source

FEATURES:

Low noise (-103 dBc/Hz 1 kHz offset @ 1GHz)

Fast switching (<2msec typ.)

Small and lightweight (10” x 10” x 3”)

Non-volatile memory for storage/recall of instrument settings

IEEE-488.2, LAN, and RS-232 interfaces standard

OPTIONS:

Fast switching speed (200 usec)

File driven hopping/swept frequency mode

Precision White Gaussian Noise Generator

APPLICATIONS:

• Earth terminal testing

• Satellite payload testing

• Satellite system integration test beds

• Mobile transceiver testing

• UAV Testing

Optional

• Multipath Fading, 6 paths

• Digitally generated AWGN

Multiple Orbit Models

Emulates earth-to-satellite-to-earth, earth-to-satellite links; Low Earth

Orbit; Medium Earth Orbit, Geostationary and Geosynchronous, satellite to satellite links and satellite to UAV testing.

Test Data Generation dBm’s standard SATGEN software data generation package or Analytical

Graphics STKTM package may be used to generate the necessary test data . SLEControl, a windows based applet will automatically format download the test files for execution in dynamic mode .

APPLICATIONS:

• Bit error rate (BER) and SINAD testing

• Component and subsystem linearity characterization

• Wireless link emulation

FEATURES:

• Calibrated noise density over entire operating frequency

• Noise power/bandwidth and noise density control

• Solid state noise attenuator with 0.0156 dB resolution

• IEEE-488.2 interface

See our web site for a full catalog: www.navair.com

15

NAVAIR

TECHNOLOGIES

R8000B Communications System Analyzer

The R8000B delivers a previously unimaginable result: a truly portable radio test set with more functions than yesterday’s bench top analyzers. And it now offers industry-leading spectral purity, surpassing that of comparably priced and even much more expensive radio test sets.

The R8000’s 14 pound weight gives technicians power and flexibility never before attainable – or currently attainable with any other instrument. This, combined with the unit’s feature-packed spectrum analyzer and bright 8.4” color LCD, makes it ideal for taking to sites for infrastructure maintenance and interference measurement.

Firmware upgrades are available free via web download for the life of the unit, and new capabilities are being constantly added — so your R8000B actually becomes more powerful over time! Software and protocol options can also be added directly from the front panel in less than 30 seconds; so it is clear that the

R8000B is the most flexible, robust future-proofed radio test set the industry has ever seen. The R8000B will change the way you perform radio service forever.”

A Compact and Lightweight Solution

You no longer need to lug multiple pieces of heavy equipment to perform service at remote locations. The R8000 has everything you need in one compact, 14 lb. package! Among the instruments included in the R8000 are:

• Spectrum Analyzer

• Signal Generator

• Sensitive Measurement Receiver

• Tracking Generator (optional)

• SINAD Meter

• Distortion Meter

• Modulation Scope

• Oscilloscope

• Frequency Error Meter

• Cable Fault Locator (optional)

• FM Deviation Meter

• AM Modulation Meter

• Receive Signal Strength Meter

• Broadband and Narrowband Power Meters

• Audio Counter

• Audio Generator

• AC / DC Voltmeters

• DMR (MOTOTRBO™) test mode (optional)

• NXDN test mode (optional)

• TETRA Subscriber Test (optional)

• P25 test mode (optional)

AutoTune for the R8000 Automated Test and Alignment

The R8000’s AutoTune option performs all manufacturer-recommended tests and alignment procedures in a fraction of the time needed to perform them manually .

With AutoTune, your R8000 automatically reads the radio model and serial numbers and makes the measurements and alignments needed to bring the radio within factory specifications. Ideal for large radio fleets with Preventative Maintenance (PM) programs, the AutoTune option records a complete record of your test session and allows you to build a complete test history of every radio in the fleet.

AutoTune for the R8000 reduces the time it takes to test and align a radio from an hour or more to

10-12 minutes, and is presently available for Motorola XTL Series mobiles, XTS2500/5000 portables and

APX6000/7000 Series mobiles and portables.

Benefits:

• Reduces test time by over 80%

• Maintains consistency and accurate test results from radio to radio

• Can be used by non-technical personnel

• Adjustable Pass/Fail indicators flag radio defects

• Results can be stored on the R8000 and exported to a USB drive for analysis with PC spreadsheet software

• Comprehensive test report shows date of test, model, serial number, operator ID and complete test record

See our web site for a full catalog: www.navair.com

16

NAVAIR

TECHNOLOGIES

Geographic Signal Coverage at your Fingertips

Setting the Standard for Automated Measurement, Analysis and Report of

Wireless System Signal Coverage

STI Field Test 7 is automated signal measurement and analysis software that can be interfaced with the R8000B. STI Field Test 7 includes a

GPS receiver, street map data for the entire United States of America and Canada with major highways worldwide, an RF instrument interface/ driver, manual and one year warranty, allowing you to integrate your laptop PC and digital radio test set or spectrum analyzer to create a coverage verification system that meets your requirements.

The versatile STI Field Test 7 interface software allows for connection to the proprietary or application-specific receiver of your choice. The types

The first step toward

and useful life for your STI system.

improving system coverage

From digital BER, to analog SINAD, and signal strength to modulation fidelity, STI Field Test 7 is the automated field measurement and analysis package to measure mobile communication system coverage and performance.

system performance.

See our web site for a full catalog: www.navair.com

17

NAVAIR

TECHNOLOGIES

RF INFRASTRUCTURE PRODUCTS

Broadband

RX Antenns

700/800 MHz

T-Pass TX Combiner

Tower Top

Amplifier

Repeater #1

Repeater #2

Repeater #3

Repeater #4

Repeater #5

Broadband

TX Antenns

792-824 MHz

Preselector

746-901 MHz Receive Multicoupler

Multiband Shorthaul

Control Station Combiner

43-05-01A Series

BTG, TX RX System multi-channel multi-band combiners provide frequency-agile operation across multiple bands. Interoperability can be combined into a single network for efficiency.

PROBLEMS

Many bands on site with frequencies from VHF to 900 MHz

Standardization across all sites

Space constraints

Cost reduction

SOLUTIONS

- Multiband combiner allows operation in multiple bands

- Advance coupler technology with no need for tuning — control stations can be connected without regard to frequency

- Low Profile for space efficient installation

- Multiple bands can utilize the same combiner for cost reduction

APPLICATIONS

Control Station Combiners operating in multiplebands may be used to reduce the number of antennas required on a communications site while also ensuring that predictable radio-to-radio isolation is maintained at all times — irrespective of individual radio’s Tx or Rx operating mode or antenna isolation characteristics.

Is ideally used with multiband coupler

Bird

®

SB I Series Signal Boosters

62-89B, 62-90A Series

NPSPAC

Bird Technologies Group, TX RX Systems brand, SB I Series family of signal boosters provides an exceptional balance of performance and value for extended coverage of radio communications networks.

PROBLEMS

RF coverage is required for different building sizes and configurations

System monitoring is required

Need to eliminate potential interference and unwanted coverage

Reliable in-building communications is a must

SOLUTIONS

- Bird

®

SB I is available in two output power models:

- High power model (+35 dBm)

- Low power model (+25.5 dBm)

- Alarm and sampler port are available

- Gain is adjustable from 0 to 30 dB in

2 dB increments

- Bird invented the signal booster and has been a leader in providing reliable inbuilding wireless solutions since 1980

APPLICATIONS

Cost effective in-building coverage solutions for applications in critical communications systems

Public Safety, Private Wireless networks

Excellent selectivity for operation in a shared frequency band

See our web site for a full catalog: www.navair.com

19

NAVAIR

TECHNOLOGIES

Bird

®

SB I Series Signal Boosters

62-83E-Series

Dual Band 700/800 MHz

Bird Technologies Group, TX RX Systems brand, SB I Series family of signal boosters provides an exceptional balance of performance and value for extended coverage of radio communications networks.

PROBLEMS

RF coverage is required for different building sizes and configurations

System monitoring is required

Need to eliminate potential interference and unwanted coverage

Reliable in-building communications is a must

Need to provide coverage for both 700 MHz and 800 MHz

PROBLEMS

RF coverage is required for different building sizes and configurations

System monitoring is required

Need to eliminate potential interference and unwanted coverage

Reliable in-building communications is a must

SOLUTIONS

- Bird SB I is available in two output power models:

- High power model (+34 dBm)

- Low power model (+25.5 dBm)

- Alarm and sampler port are available

- Gain is adjustable from 0 to 30 dB in

2 dB increments

- Bird invented the signal booster and has been a leader in providing reliable inbuilding wireless solutions since 1980

- SB I dual band provides coverage of both frequencies in one unit

SOLUTIONS

- Bird SB I is available in two output power models:

- High power model (+34 dBm)

- Low power model (+25.5 dBm)

- Alarm and sampler port are available

- Gain is adjustable from 0 to 30 dB in

2 dB increments

- Bird invented the signal booster and has been a leader in providing reliable inbuilding wireless solutions since 1980

APPLICATIONS

Cost effective in-building coverage solutions for applications in critical communications systems

Public Safety, Private Wireless networks

Excellent selectivity for operation in a shared frequency band

Bird

®

SB I Series Signal Boosters

62-91-Series

Cellular A, B, & A/B Bands

Bird Technologies Group, TX RX Systems brand, SB I Series family of signal boosters provides an exceptional balance of performance and value for extended coverage of radio communications networks.

APPLICATIONS

Cost effective in-building coverage solutions for applications in critical communications systems

Coverage of full Cellular A/B bands or each band individually

Excellent selectivity for operation in a shared frequency band

See our web site for a full catalog: www.navair.com

20

NAVAIR

TECHNOLOGIES

Bird

®

Signal Booster II Series

Supports UHF and 700/800/900MHz.

Mission Critical Reliability for In-building Coverage . . .

The New Signal Booster II provides Public Safety grade reliability and coveragein disadvantaged RF locations for First Responders, Public Safety/Governmental agencies and Private System Users. Reliable RF coverage is gained in basements, parking garages, correctional facilities, courthouses, hospitals, malls and schools.

Other challenging environments covered by the Signal Booster II product include subways and rapid transit systems, airports, stadiums/arenas, high-rise buildings and large private enterprise facilities and campuses.

Whether you are on the front line and depend on a reliable communication system or you are the systems integrator responsible for implementing adependable system, this new compact design facilitates installation and system optimization for rock solid operation via a simple man-machine interface.

Imbedded features for ease of initial setup include decoupled test points for signal level detection, menu driven gain setting, front panel LED monitors for amplifier and power status, and an at-a-glance LED bargraph to indicate relative level of Output Level Control (OLC). Additionally, this product offers a unique on-board OLC Data Log feature thatarchives a User Signal Profile to facilitate optimumsystem configurationand performance.

Output Level Control (OLC) Circuit Monitors and

Controls RF Output Power

• Maintains maximum required output power while preventing damage and excessive emissions per FCC requirements

• Easy-to-read LED bar graph

• Unique OLC DataLog feature facilitates system maintenance and optimization

Decoupled RF Test Points For Simplified Service

• Allow fast system measurements in both uplink and downlink directions

• Monitor signals for performance optimization

• Integrated design facilitates non-intrusive measurements

Secure, Non-Vented NEMA Enclosure Suitable for Extreme

Indoor and Outdoor Environments

Optional Features Available

• Comm Card II for remote communications and control

• Fiber optic link interface

• Redundant PA configuration

• -48 VDC input

Microprocessor Controlled Fault Monitoring and Alarming

Ensures Reliable Operation and Flexible Configuration

• Control system continuously monitors parameters including voltage, current, temperature and OLC activity

• LEDs on each module quickly annunciate source of fault

• Simple, back-lit liquid crystal display (LCD) and switch control

• Fault triggers annunciation on panel, alarm contact closure and internal recording of failed subsystem

Programmable Gain Setting

• Ease of initial configuration via front panel

• When used in conjunction with OLC DataLog, simplifies post installation adjustments

Three Major Gain Ranges Available

Low:+ 45 dB, Medium:+ 60 dB, High:+ 80 dB

All Signal Booster II products comes with a 5 year OEM warranty

See our web site for a full catalog: www.navair.com

21

NAVAIR

TECHNOLOGIES

Bird

®

Digital Signal Booster

Model 613-8-Series

Bird Technologies, TX RX Systems Digital Signal Booster operates in the 700/800 MHz range with 1-60 programmable digital filters for both uplink and downlink. Filter center frequency and characteristics are fully programmable to meet the demands of various systems and signals such as APCO 25 phase II. Filter bandwidth is user programmable from 6.25 kHz to 15 MHz. All state-of-the-art product components are protected by a NEMA 4 style enclosure to meet the demands of the NFPA requirements. Intuitive web browser interface allows booster to be easily configured for changing RF environments.

PROBLEMS

Noise and Interference that cause communication problems in a crowded spectrum.

Changes in RF environment.

System coverage is difficult to assess.

SOLUTIONS

Digital booster can amplify several individual channels or narrow bands of frequencies

(amplifying the desired spectrum and preventing interference to other users).

An intuitive web browser user interface offers not only local but also remote access from any compatible PC on the network maximizing flexibility to easily implement system changes such as output power, center frequency, filter shape, and group delay.

Built-in pilot signal capability. The 1 kHz

FM modulated carrier allows simple SINAD qualification testing.

APPLICATIONS

Any communications system installation where you need to reduce the number of antennas on a tower.

Any communications system designed to minimize tower size and maximize site space

Secured applications that require equipment under lock and key

Bird

®

7020 Series Power Sensor

Bird’s

®

new 7020 Power Sensor is an economical plug andplay solution to your power measurement needs. The 7020 determines and reports Forward and Reflected True Average Power and VSWR over a wide frequency range of 350 MHz to 4.0 GHz. It also never requires field calibration, only requires factory calibration once per year, and is traceable to National Institute of

Standards and Technology (NIST).

PROBLEMS

Have analog, digital, and multi-carrier signals to measure

Tight budget

Downtime is unacceptable

Varying field tech skilllevels

Need confidence inmeasurement

SOLUTIONS

Modulation independent measurements

Inline device, no directional coupler required

Complimentary Virtual Power Meter

(VPM2) application

Monitor and perform maintenancefor monitoring while DUT is in-service

Measure forward and reflectedpower to troubleshoot system failures

Sensor plugs and plays with multiple display devices.

No field calibration required

NIST traceable calibration

APPLICATIONS

WPS measures: Analog Cellular, Digital Cellular,

3G, 4G,Tetra, APCO/P25, Trunking, CDMA,

TDMA, WCDMA, GSM,Transportation, Tactical

Military, Radar, Avionics, Marine, LMR, Analog

Broadcast, Digital Broadcast, GSM, GPRS,EDGE,

UMTS, HSDPA, Bluetooth, Fire, GPS, NPSPAC,

Pag-ing, Project 25, Public Safety, Telematics,

Utilities, WIMAX and WLAN.

Measurements performed: Forward and Reflected

Calculations Performed: VSWR and True Average

Power

See our web site for a full catalog: www.navair.com

22

NAVAIR

TECHNOLOGIES

Bird

®

Compact Ceramic TX Combiner

Model 73-67-50 Series

BTG, TX RX System brand UHF Ceramic TX Combiner combines up to 6 transmitters onto a single antenna. With a footprint that’s more than 50% smaller than comparably performing

10” cavities. This optimizes valuable space for your radio equipment, which in an era of escalating lease costs, makes it the perfect solution for expansion. And because of our modular design, you can purchase in single-channel increments. Plus, it delivers the kind of high performance and minimum interference you’ve come to expect from Bird

®

.

PROBLEMS SOLUTIONS

May need to minimize the number of antennas at Can combine up to six transmitters onto a single a communication site. antenna which efficiently utilizes valuable rack and shelter space.

APPLICATIONS

Need to maintain or minimize additional costs associated with space in a radio shack/ transmitter shelter.

Our units provide valuable real estate in small shelters where traditional T-Pass combiners are too large.

Any communications system installation where you need to reduce the number of antennas on a tower.

Need to minimize interference with competing communication systems.

System-level signal analysis (including interference mitigation) for each customer application.

Any communications system designed to minimize tower size and maximize site space

And may lack the time or expertise to integrate the solution into the overall radio system.

Offer complete solutions from system design through individualized configurations, installation support, and maintenance programs.

Secured applications that require equipment under lock and key

Mini AutoQuad

Tower Top Amplifier System

434 Mission Critical Series

Bird, TX RX Systems brand, Auto Quad Tower-Top Amplifier (TTA) system is a high performance, quadrature-coupled low noise amplifier (LNA). The TTA increases receive sensitivity, reduces transmit signal interference and can make all the difference in Mission Critical Communications.

The TTA operates independently, monitoring LNA current and automatically switching to a redundant LNA if needed. Status reporting is accomplished via AISG compliant telemetry between the controlling processor in the Tower Box and the base control unit. The base control unit has an on board AISG modem device which does not require the use of an external data cable. This telemetry does not interfere with RF Signals in any way and communicates the LNA currents, temperature and operational status to the base control unit LCD display. Test modes and manual switching between LNA’s is also accomplished by way of the telemetry system.

The TTA consists of two components: the tower top amplifier mounted close to the antenna and the control unit.

The control unit is available in two styles, either with or without a receiver multicoupler. In order to reduce the size of the TTA and simultaneously provide 120 dB of isolation of a TX carrier, filtering has been split between the TTA and the base unit.

Industry leading TTA amplifier linearity guarantees superior immunity to intermodulation interference.

FEATURES

All tower top ports protected by internal surge suppressors.

Two independent quadrature coupled LNA’s in the tower top assembly provides redundancy. Microprocessors continuously monitor amplifiers and will switch tower top LNA’s when needed to ensure the maximum uptime.

At a glance status reporting and form-C contact switching intiated when alarm detected.

Wind loading is reduced due to the small enclosure size.

Available with a 16 Port Receive Multicoupler or a Control Monitoring Unit.

APPLICATIONS

The TTA is designed to increase the performance of a Base Transceiver

Station (BTS) while ensuring reliable communications for critical Public

Safety applications. This increase in sensitivity can make up for the imbalance between mobile and handheld users in critical systems.

See our web site for a full catalog: www.navair.com

23

NAVAIR

TECHNOLOGIES

Compact Receiver

Compact Receiver

Receiver Multicouplers

TX RX Systems Inc. has designed a new series of Compact Receiver Multicouplers that offer superior specifications in a one rack unit package. By utilizing broadband preamps and power supplies, three basic products cover most applications in the 118 - 901 MHz range.

Receiver Multicoupler Features:

Sleek, 19” 1 RU rack mount design

Low noise, high performance amplifiers

AC & DC power input

Auto-Ranging AC Power, 85-264 VAC

DC Power Input, 12-24 VDC

Receiver Multicoupler Specifications

MODEL

NUMBER

42-33-01-04N

42-33-01-08N

42-33-01-12N

42-33-01-08

42-33-01

42-57-01-04N

42-57-01-08N

42-57-01-12N

42-57-01-08

42-57-01

42-83A-01-08

42-83A-01

NUMBER

OF

CHANNELS

16

4

8

12

12

8

4

8

8

16

8

16

BANDWIDTH

118-174 MHz

118-174 MHz

118-174 MHz

118-174 MHz

118-174 MHz

380-520 MHz

380-520 MHz

380-520 MHz

380-520 MHz

380-520 MHz

746-901 MHz

746-901 MHz

SYSTEM

GAIN

(TYPICAL)*

PREAMP

NOISE

FIGURE

22 dB 2.0 dB

PREAMP

3RD ORDER

OUTPUT

INTERCEPT

POINT

41 dBm

15 dB

15 dB

17 dB

10 dB

22 dB

15 dB

15 dB

17 dB

10 dB

19 dB

12 dB

2.0 dB

2.0 dB

2.0 dB

2.0 dB

1.7 dB

1.7 dB

1.7 dB

1.7 dB

1.7 dB

1.5 dB

1.5 dB

41 dBm

41 dBm

41 dBm

41 dBm

41 dBm

41 dBm

41 dBm

41 dBm

41 dBm

41 dBm

41 dBm

POWER

REQUIREMENT

DC

BACKUP

CONNECTORS

(IN/OUT)

DIMENSIONS

85-264 VAC, 47-63 Hz 12-26 V N(f)/N(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/N(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/N(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/BNC(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/BNC(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/N(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/N(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/N(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/BNC(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/BNC(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/BNC(f)

1.75"H x 19"W x 14"D

85-264 VAC, 47-63 Hz 12-26 V N(f)/BNC(f)

1.75"H x 19"W x 14"D

Combline Preselector

792-824 MHz

*Attenuator pads are provided for system optimization

COMBLINE PRESELECTOR 792-824 MHz

Model Number 89-83C-01-32

Power Rating Rx Only

Pass Bandwidth 792-824 MHz

Passband Insertion Loss 1.5 dB nominal

Selectivity @ 776 & 851 MHz >110 dB

VSWR 1.5:1 max.

Connectors (Input/Output N-female

Mounting 19” Rack Mount Panel

Dimensions 3.5”H x 19”W x 7”D

Weight 8 lbs est.

TX RX Systems Inc. Manufacturers a comprehensive line of Preselectors and filters for a broad ranges of applications. Contact your Navair representative for specific product information.

See our web site for a full catalog: www.navair.com

NAVAIR

TECHNOLOGIES

Duplexers

Model Number

30-37-01A

144-174 MHz • 2” Square

Model Number

Power Rating

Minimum Separation

Channel Isolation

Insertion Loss

Connectors ( Tx & Rx / Ant.)

Mounting

Dimensions

30-37-01A

100 Watts

3 MHz

100 dB

1.5 dB

BNC(F) / N(F)

19" Rack Mount Bar

5.25"H x 19"W x 7.25"D

Model Number

28-37-02A

144-174 MHz • 6.625” Diameter

Model Number

Power Rating

Minimum Separation

Channel Isolation

Insertion Loss

Connectors

Mounting

Dimensions

28-37-02A

400 Watts

500 KHz

85 dB

1.5 dB

N-female

19” Rack Mount Bars

33"H x 19"W x 15"D

Model Number

28-70-02A

450-470 MHz • 4” Diameter

Model Number

Power Rating

Minimum Separation

Channel Isolation

Insertion Loss

Connectors

Mounting

Dimensions

28-70-02A

350 Watts

5 MHz

100 dB

0.6 dB

N-female

19" Rack Mount Bars

5.25"H x 19"W x 12"D

Model Number

28-70-15H

450-470 MHz • 1.25”x 2” Rectangular

Model Number

Power Rating

Minimum Separation

Channel Isolation

Insertion Loss

Connectors

(Tx & Rx / Ant.)

28-70-15H

100 Watts

5 MHz

80 dB

1.2 dB

BNC(F) / UHF(F)

Mounting

Dimensions

Mobile Mount Plate

2.7"H x 5.2"W x 7.4"D

Model Number

28-89-01A

806-869 MHz • Single Frequency Pair

Model Number

Power Rating

Minimum Separation

Channel Isolation

Insertion Loss

Connectors

Mounting

Dimensions

28-89-01A

125 Watts

45 MHz

90 dB

0.8 dB

N-female

19" Rack Mount Bars

5.25"H x 19"W x 10"D

Model Number

26-89-03A

806-866 MHz • Trunking Combline

Model Number

Power Rating

Minimum Separation

Channel Isolation

Insertion Loss

Connectors

Mounting

Dimensions

26-89-03A

600 Watts

45 MHz

45 dB Tx / 77 dB Rx

0.5 dB Tx / 1.0 dB Rx

N-female

19" Rack Mount Panel

5.25"H x 19"W x 9"D

See our web site for a full catalog: www.navair.com

25

TX RX Systems Inc.

716-549-4700 www.txrx.com

page 12

NAVAIR

TECHNOLOGIES

T-PASS

®

EXPANDABLE

®

EXPANDABLE

TRANSMITTER COMBINERS

746-869 MHz

T-Pass

®

combiner systems can be expanded one channel at a time with factory-tuned, easy-to-install expansion channel assemblies. Expansion is usually accomplished without modifications to the existing system, and it amounts to nothing more than placing a new channel assembly, or several, on top of the existing system. New channel frequencies can be above, below, or between existing channel frequencies.

T-Pass

®

channel interconnect cables are individually optimized to their own channel frequency. No compromises are necessary to accommodate other channel frequencies. Each channel can therefore be anywhere in a very broad frequency range.

T-Pass

®

coupling loops and interconnect cables are elegantly designed to operate together as a broadband 50-ohm transmission line. Individual channel frequencies are therefore not restricted to a narrow operating bandwidth, as in the case of ordinary cavity or cavity/ferrite combiners.

T-Pass

®

transmitter combiners are inherently capable of operating over bandwidths that span the entire 746-

869 MHz frequency range.

TX RX Systems

T-Pass

®

transmitter combiners utilize innovative, three-port bandpass cavities of patented design (U.S. Patents No. 4,249,147 and 4,493,422) and dual ferrite isolators to provide all the benefits of ordinary cavity/ferrite combiners:

• Significantly lower channel insertion loss than hybrid/ferrite combiners;

• High isolation between transmitters;

• High antenna-to-transmitter isolation;

• High intermodulation suppression

• Excellent transmitter noise suppression.

Unlike ordinary cavity/ferrite combiners,

T-Pass

®

transmitter combiners are inherently expandable, broadband and easily adaptable to the most difficult duplex system design requirements.

Superior Expandability and Bandwidth

Ordinary cavity/ferrite combiners rely upon quarterwave cable transformers, resonant stubs and star junctions for combining groups of two, four or five channels. Mechanical problems quickly develop in the process of trying to locate several groups of cavities in close proximity to each other . Additionally, because of the frequency-sensitive, narrowband nature of the cable transformers, operating bandwidth is usually restricted to about 6% of system center frequency.

Expansion Channel

746-869 MHz

T-Pass

®

transmitter combiner channel assemblies consist of the following items:

• A 6.625” 3-quarterwave

T-Pass

®

cavity filter;

• A dual ferrite isolator, with RF loads and coaxial cable for connection to cavity.

• An RF sampler to measure RF power reflected into the isolator output load

• Isolator and channel mounting hardware

Expansion assemblies (channel 2 and higher) are supplied with a thruline of the correct length for the new and existing channel frequencies. Starter channels

(channel 1, bottom) are supplied with a short circuit on the T-Pass loop.

NEW

All T-Pass Expandable Transmitter Combiners comes with a 5 year OEM warranty.

See our web site for a full catalog: www.navair.com

26

NAVAIR

TECHNOLOGIES

Trilogy’s AirCell

®

cables embody innovative, waterproof air-dielectric design, consistent manufacturing, and quality assurance techniques in accordance with ISO-9001 procedures. The result is a coaxial cable with superior electrical and mechanical

performance that completely eliminates water migration.

Trilogy’s AirCell

®

Transline cable is designed for base station applications and is field proven in cellular, PCS, ESMR, paging, broadcast, and microwave applications. AirCell

®

Transline cables are available with impedances of 50 Ohms in 1/2", 5/8", 7/8",

1-1/4", and 1-5/8" sizes and with impedances of 75 Ohms in 1/2", 5/8", and 7/8" sizes.

To accompany our cables,Trilogy offers a complete line of connectors, accessories, and cable assemblies for all your wireless application needs.

AirCell

®

Transline cable is designed for the following applications:

PCS, Cellular, and Paging

Trilogy’s cables and connectors are ideally suited to the high performance requirements of cellular and PCS applications.

Transline cable’s excellent insertion loss,VSWR, and intermodulation characteristics enhance both digital and analog systems.

Water migration problems are non-existent because of the unique AirCell

®

design. Trilogy’s high performance connectors are easily attached to form a solid watertight assembly that will provide trouble free communications for the life of your system.

Broadcast

Having the easiest installation in the industry makes AirCell

®

Transline cable the best choice for radio and television broadcast antenna feeders and for AM, FM, shortwave,VHF, and UHF frequencies.

Microwave

Trilogy’s AirCell

®

Transline cable is perfect for all private and PTF microwave applications. Transline cable’s superior VSWR

performance has been specifically tested for microwave applications. The cable’s strong, rugged design as well as flexibility makes it easy to install in any climate, and its weatherproof properties result in a life expectancy of over 15 years.

Enhanced Specialized Mobile Radio (ESMR)

The low attenuation and high shielding effectiveness of AirCell

®

Transline make it an ideal replacement for braided cable.

The low insertion loss of Trilogy’s AirCell

®

Transline cables typically provides double the coverage area for the same transmit power, or it can provide coverage to the same area and use lower transmit power.

Level of Fire Retardancy

The standard Transline cable construction uses a weather-resistant, black polyethylene jacket suitable for indoor, outdoor, or underground installations. For additional requirements regarding flame retardancy, AirCell

®

Transline cables are available with a non-halogenated, flame retardant jacket, which meets the most stringent fire retardancy requirements of UL, NEC, IEC, MSHA.

See our web site for a full catalog: www.navair.com

27

NAVAIR

TECHNOLOGIES

NextG Plenum

For 4G Systems

100% Made in the USA

• Electrical Performance Surpasses Copper

• Lighter Weight and Environmentally Friendly

• Fastest and Easiest Connectorization

• Preferred Choice for Operators and Integrators

AirCell®® Plenum Cable

See our web site for a full catalog: www.navair.com

800-TRILOGY (874-5649)

28

·

www.trilogycoax.com

·

[email protected]

NAVAIR

TECHNOLOGIES

50 Ohm Plenum, 1/2”

50 Ohm Plenum, 1/2″ (6 GHz)

Description

Standard Cable*

1/2″, Corrugated, Jacketed UL-910,

CATVP

Product Number

AP6012J50

Physical Dimensions

Center Dia., in (mm)

Dia. Over Dielectric, in (mm)

0.188 (4.78)

0.470 (11.94)

Dia. Over Outer Conductor, in (mm) 0.540 (13.72)

Dia. Over Jacket, in (mm)

Center Conductor

Outer Conductor

Jacket Color

0.615 (15.62)

Copper Clad Aluminum

Corrugated Aluminum

Off-white

Electrical Characteristics

Maximum Frequency, GHz

Peak Power Rating, KW

DC Res., Ohms/1000 ft (1000m)

Center

Outer

DC Breakdown, kV

Capacitance, pF/ft (m)

10

35

0.46 (1.51)

0.51 (1.67)

4

22 (72.12)

Inductance, mH/ft (m)

Jacket Spark, kV RMS

0.057 (0.187)

8

Impedance, Ohms

Velocity of Propagation

50

94%

Mechanical Characteristics

Min. Bend. Radius, in (mm) – Single 2 (50.8)

Min. Bend. Radius, in (mm) – Multiple 5 (127)

Cable Weight, lb/ft (kg/m) 0.129 (0.192)

Bending Moment, ft.lb (N.m)

Tensile Strength, lb (kg)

Flat Plate Crush, lb/in (kg/mm)

1 (1.4)

250 (114)

78 (1.39)

15

25 Number of Bends, typical

Temperature, oF (oC)

Recommended Install

Recommended Storage

Operating

+5 to 194 (-15 to 90)

+5 to 194 (-15 to 90)

+5 to 194 (-15 to 90)

1000

1500

1700

1800

1950

2000

2100

2200

2300

2400

2500

2700

3000

3300

3400

4000

4900

5000

5200

5300

5600

5825

100

Attenuation and Average Power

Frequency

MHz

Attenuation dB/100 ft dB/100m

0.70 2.30

Avg. Pwr. kW

3.98

450

500

1.50

1.59

4.92

5.22

1.85

1.75

600

700

800

900

960

1.75

1.87

1.96

2.14

2.23

5.74

6.13

6.43

7.02

7.31

1.58

1.47

1.37

1.29

1.24

2.30

2.85

3.05

3.14

3.24

3.33

3.42

3.50

3.59

3.67

3.75

3.90

4.14

4.33

4.45

4.91

5.61

5.69

5.92

6.03

6.37

6.83

7.54

9.35

10.00

10.30

10.63

10.92

11.22

11.48

11.78

12.04

12.30

12.82

13.58

14.20

14.60

16.10

18.40

18.66

19.42

19.78

20.89

22.40

0.61

0.60

0.55

0.50

0.49

0.48

0.47

0.46

0.45

1.21

0.98

0.98

0.93

0.85

0.84

0.82

0.80

0.78

0.77

0.75

0.72

0.68

Standard conditions:

For attenuation, VSWR 1.0, ambient temperature 20°C (68°F)

For average power, VSWR 1.0, ambient temperature 40°C (104°F), inner conductor temperature 100°C (212°F), no solar loading

See our web site for a full catalog: www.navair.com

29

NAVAIR

TECHNOLOGIES

PLENUM CABLES

Cable Selection Guide

50 and 75 Ohm, Plenum and Plenum Radiating

75 Ohm Plenum, 1/2″

Cable Size, 1/2”

Description

Plenum Cables

75 Ohm

Plenum

Product Code

Plenum Plenum Radiating

Attenuation and Average Power

Frequency

Plenum Radiating

Product Code

Attenuation

Plenum

Avg. Pwr.

Jacketed UL-910, CATVP

CATVP

Physical Dimensions

AP012U50

Copper Clad Aluminum

Dia. Over Outer Conductor, in (mm)

0.540 (13.72)

Velocity of Propagation

DC Res., Ohms/1000 ft (1000 m)

Outer

93%

10

1.09 (3.58)

0.51 (1.67)

4

5 (127)

50

96%

10

40

2000 MHz

Unjacketed

1.57 (5.32)

0.44 (1.44)

0.63 (2.05)

0.77 (2.53)

1.36 (4.46)

1.95 (6.41)

2.07 (6.78)

2.74 (9.00) 3.20 (10.0)

3.50 (11.7)

0.058 (0.086)

3.92 (12.9)

2.99 (9.82)

3.23 (10.59)

0.104 (0.155)

3.73 (12.25)

Flat Plate Crush Strength lb/in ( kg/mm) 78 (1.39)

450 MHz

900 MHz

1000 MHz

1700 MHz

2000 MHz

2300 MHz

2400 MHz

3000 MHz

1.85

1.29

1.21

0.98

0.84

0.78

0.77

0.68

APC012J50

Copper

0.615 (15.62)

0.19 (0.28)

6.34

4.46

3.63

2.06

1.43

1.35

1.02

0.93

0.86

0.82

0.75

AQ012J50

5

10

20

100

108

150

5 (127)

93%

300

450

500

0.15

0.21

0.30

0.37

Copper

0.49

0.70

0.98

1.21

0.540 (13.72)

1.57

0.615 (15.62) 2.18

0.71

0.74

0.87

0.93

1.00

5 (127)

50

96%

1.20

10

1.40

40

1.48

1.57

2.32

2.42

2.85

3.07

3.29

3.94

4.59

4.87

5.15

5.21

5.68

6.13

6.62

6.73

7.01

AP012U75

1.97

1.90

0.058 (0.086)

5 (127)

75

12

35

6.60

4.66

1.17

1.00

0.94

0.89

6.43 (21.1)

1000

1700

4.18 (13.72)

7.25

4.49 (14.74)

7.41

4.59 (15.07)

8.43

5.15 (16.90)

9.22

3.01

9.88

3.29 (10.8)

0.62

0.46

10.7

0.43

3.29

55 10.8

3.52

55

11.6

3.60

56

11.8

3000 4.03

63

13.2

0.35

63

64

65

65

65

66

0.65

0.62

0.46

68

69

67

68

0.43

0.40

70

70

68

69

0.39

0.35

See our web site for a full catalog: www.navair.com

30

NAVAIR

TECHNOLOGIES

RF Surge Protection

Table below allows comparison between the 3 technologies of RF coaxial surge protectors, in order to select the right solution regarding the application and the requirements.

Technology

CITEL series

Gas tube

P8AX

DC Block

CXP-DCB

Quarter wave

PRC

Principle

Residual voltage

Bandwidth

DC injection

8/20s discharge current capability

Life expectancy

Connedtors

Sparkover from 70V to 600 V in relation with the dV/dt , then arc regime (short - circuit of the line in the full bandwidth). RF signal disturbed during the protection o peration.

Sparkover + Filtering

< 100 V

Short-circuit of the line in the full bandwidth : RF signal disturbed during the protection operation.

DC to 3GHz (dependent of the coaxial connector and of the impedance)

Compatible

125-1000 MHz

10 kA

Linked to the GDT stress N, BNC,

TNC, UHF, SMA, 7/16

Not compatible

10 kA

Linked to the GDT stress

N, BNC, TNC, F

Adapted short-circuit/selective band filter

< 20 V

RF signal not disturbed during the protection operation.

Narrox band (GSM, DCS1800, PCS,

DECT, GPS) Wide band (e.i. 1,3 - 2,8 GHz)

Not compatible

Fonction de la connectique : 100 kA pour le 7/16, 50 kA pour le N

Illimited

7/16, N, TNC....

The efficiency of coaxial protectors is highly dependent on proper installation, in particular their connection to the earthing network of the installation.

The following installations rules must be strictly observed to insure the efficiency:

Equipotential bonding network : all the bonding conductors of the installation must be interconnected and connected to the installation earthing network.

Optimized connection of the protector to the bonding network: to reduce the residual voltages during lightning discharge currents, the connection of the protector to the bonding network must be as short as possible (less than 50 cm) and has a proper cross section (at least 4 mm).

The ’feedthrough mounting‘ versions meet perfectly all these requirements.

Warning: for good contact, remove carefully all paintings or insulating coatings.

Location of the protectors: they should preferably be placed at the entrance of the installation (to limit the penetration of lightning currents) and also near sensitive equipment (to enhance protection).

Feedthrough mounting

Direct mounting of the surge protector on the grounded frame at the installation entrance:

– perfect connection to the bonding network

– best location (conduction of the surge currents at the entrance of the installation)

– good mechanical withstand.

Alternative mounting

– connection to the bonding network by wire (4 mm minimum and shortest length possible).

See our web site for a full catalog: www.navair.com

31

NAVAIR

TECHNOLOGIES

RF Coaxial Protectors

PRC – P8AX – CXP

PRC1800-7/16MF P8AX25-B/MF CXP Series

Citel’s PRC Series is a Quarter Wave

Stub (QWS) surge arrestor designed for specific frequency bands. The PRC does not utilize any active components and allows only the specified frequency to pass thus eliminating low frequency transients. This design allows for very high surge handling capacity up to

100kA 8/20us. The PR is conveniently installed in series with the line and can be mounted via the standard grounding screw or bulkhead.

Available with the most commonly used connectors including BNC, F, N,

SMA, TNC, and 7/16 Din connectors or it can be custom made for your application with any combination of connector and gender types to eliminate the need for any adapters. .

The P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular, GPS and CATV equipment against lightning surges and electrical transients. They are a first line of defense for your sensitive equipment.

The P8AX series employs a patented replacable gas tube, are waterproof

(IP65) and available with three grounding options: M6 ground screw, bulkhead or optional mounting bracket.

High-Frequency Surge

Protection

• 20kA transient amps protection

(8/20μs)

• 5kA transient amps protection

(10/350μs)

• DC Pass to +/-48V

• VSWR < 1.2 Insertion Loss < 0.1dB

• Bi-directional, series installed

• Waterproof

• Removable GDT

The CXP Series has been designed to protect radio-base communications systems from lightning and electrical transients.

This device is a dc blocked protector not to be used where transmitter combining is performed.

The CXP Series is designed to protect terminals connected to coaxial cables against transient overvoltages due to lightning strikes. The CXP Series is a combination of Gas Tubes and clamping diodes which allows a high discharge current with a low residual voltage and low insertion losses.

See our web site for a full catalog: www.navair.com

32

NAVAIR

TECHNOLOGIES

Android Tablet Test Platform:

• Android Gingerbread

• 7” 800x480 WVGA

• Easy-to-use GUIsys

• USB ports

• Easy Upgrade

• Ethernet & Wi-Fi

• SD card expansion

• Plug & Stay All-in-one

• Rugged Hand-Held

• Test Copper DS0/DS1 to

Fiber10G Ethernet!

GUISYS...meets

State-of-the-Art Android Tablet-PC Test-system provides a peerless User Experience with exceptional power and performance.

Why use or lose single function unreliable module based test sets when you can have so much more power and capability for a lot less $$$.

Supports Android app’s: Web Browser, Email, Maps, Word,

PDF’s, Excel, Video & Audio, Contacts & Notes, ...and more!

See our web site for a full catalog: www.navair.com

33

NAVAIR

TECHNOLOGIES

Test Platform Features

Full Tablet-PC POWER Flexible Performance

• Large 7” WVGA Touch-screen

• Landscape & Portrait Modes

• 10/100 LAN port + Wi-Fi support

• 2 USB Host ports & USB OTG

• Browse the Web w/GOOGLE

• Send & Receive Emails

• Supports Multi-media playback

• Supports core Android App’s;

• Google Maps

• Notes & Contacts

• Edit & View PDF’s

• Power Point, Excel, WORD

• Training Video’s on the Test Set!

• Transfer Results, Logs & Test files

• Update from anywhere!

• Plug & Stay — no modules to lose!

• AC & Long-Life Lithium DC Power

See our web site for a full catalog: www.navair.com

34

• State-of-the-Art

• Intuitive, Easy-to-Use Android GUI

Add ANY of these test services

Fast Ethernet (10/100)

• Gigabit Ethernet (1000)

• Dual Gigabit Ethernet

• 10Gigabit Ethernet

• DS3

• DS1, Dual-DS1

• E1, Dual-E1

• DataCom

• DS0 Data Services

• DS0-PCM Voice Services

• 2-wire Signaling-TIMS

• 4-wire Wideband TIMS

• PRI-ISDN NT&TE

• 4-wire DDS , Frame-Relay

• CO Timing Analyzer

• Wi-Fi Analyzer

• All-in-one;1 to 16Test Interface!

Configure your System! As YOU

need it!

• Local & Remote Control

• 10/100 LAN or RS232

• Rack Mountable

• Rugged Handheld Tablet

NAVAIR

TECHNOLOGIES

Navair National Sales/Service Team

Customer Service Programs

Navair Service Solutions

Maximize on your capital product purchasing through an extended service plan from Navair. Selection of the right plan for your organization allows you to purchase with confidence knowing you have full support from factory trained technicians .

Direct OEM Warranty Service

Navair is the factory service centre for Bird Electronics, General Dynamics,

Tele-Instruments. Navair is the only Canadian service centre authorized to perform factory level modifications ensuring your instruments remain current .

Navair Direct Service

Navair offers product repair, calibration and certified calibration services to ensure your instruments are maintained to all OEM specifications. Navair staff have over seventy (70) years combined experience in the Communications, Test and

Measurement Industry a tradition you can depend on. Navair Direct offers the

following value added services:

• Service Report

• Repair Estimate

• Factory supplied hardware and software upgrades, which enhance your

instrument performance .

• Ninety (90) day warranty on labour and parts replaced

• Direct factory replacement parts to ensure compliance with all OEM

specifications .

• “Preferred” Customer Status

Place all your instrumentation under an annual or multiple year service agreement with Navair and enjoy a discounted labour rate on repair.

NAVAIR CALIBRATION SERVICES

Navair is a registered ISO 9002 company with state of the art calibration facilities.

We offer complete calibration services coast to coast on most products sold by

Navair in Canada.

In addition to Navair supplied products, we offer complete calibration services on Motorola, Wavetek, Helper, Bird, Tektronix, and Agilent products. Our “Depot

Express” program was developed with our customers who demand the very best this industry can offer . As the factory authorized service centre in Canada for Bird

Technologies, General Dynamics and Tel-Instuments products we will ensure full support for all your Test and Measurement products for yers to come .

“Depot Express” Calibration Service

• Four day turn around on all IFR/General Dynamics calibration

• Certificate of Calibration traceable to National standards

• Pick up and delivery service coast to coast

• Shipping carton available

• Automatic annual recall for calibration

• Instrument loaner available (subject to availability)

A complete "turnkey" operation let our customer service representatives manage your calibration requirements as a complete operation from pick up through final delivery .

MONTREAL/OTTAWA

800-668-7440

Extension 303

TORONTO/MARITIMES

Tel: (905) 565-1583

Fax: (905) 565-8325

VANCOUVER

800-668-7440

Extension 301

NATIONAL SALES SERVICE 1-800-668-7440

Visit us at www.navair.com

Over 35 YEARS of Product & Service Excellence

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement