Hanns.G ST286MAB 27.5" Full HD LCD TV

Hanns.G ST286MAB 27.5" Full HD LCD TV
70cm (27.5”)
Liquid Crystal Display Television
Flüssigkristallbildschirm
Téléviseur à Écran à Cristaux Liquides
TV de Pantalla de Cristal Líquido
TV LCD
TV Ecrã de Cristais Líquidos
ЖКД ТВ
LCD-tv
Telewizor ciekłokrystaliczny
LCD TV
LCD TV
LCD TV
LCD TV
Folyadékkristályos TV
РК-телевізор
Televizoru LDC
LCD телевизор
TV cu LCD
LCD TV
Televizora s ekranom od tekućih kristala
S_ST286_UM_EU_V01_H
Regulatory Information ..................................................................... 3
Description of Warning Symbols ...................................................... 3
Safety Notices .................................................................................. 4
Preface ............................................................................................. 6
Warranty and Service ....................................................................... 6
Getting Started ................................................................................ 8
Package Contents ...................................................... 8
Introducing the TV ..................................................... 9
Features .................................................................... 9
Control Panel .......................................................... 10
Input and Output Jacks ............................................ 10
Remote Control ....................................................... 12
Inserting the Remote Control Batteries ..................... 16
Setting up your TV......................................................................... 18
Basic Connections ................................................... 18
Power Connection ............................................... 18
Connecting an Antenna or Cable TV .................... 18
Connecting External Devices .................................... 19
Connecting External Earphones ........................... 19
Connecting to AV Devices ................................... 20
Connecting a VCR/ STB/ DVD Player Using Component Video .......................................................... 21
Connecting a PC using VGA ................................ 22
Connecting a PC using DVI ................................. 22
Connecting HDMI ................................................ 23
Connecting USB .................................................. 23
Connecting a VCR/ STB/ DVD Player using SCART ..
24
Using the TV ........................................................... 25
Turning the TV On and Off .................................. 25
Switching Source Signals .................................... 25
Performing an Automatic Channel Search ............ 25
Selecting Channels ............................................. 25
1
English
Table of Contents
Table of Contents
English
Adjusting the Volume .......................................... 25
Adjusting On-Screen Display (OSD) Settings ............................... 26
OSD Setting Menus ................................................. 27
Adjusting Picture Settings ........................................ 27
Adjusting Sound Settings ......................................... 28
Adjusting Channel Settings ...................................... 28
Adjusting DTV Settings ............................................ 30
Adjusting PC Settings .............................................. 33
Adjusting Setup Settings .......................................... 34
Troubleshooting............................................................................. 36
Support Timing .............................................................................. 37
Specifications ................................................................................ 38
Dissembling the stand base .......................................................... 39
2
English
Regulatory Information
CE Conformity Statement
This device is in conformity with the requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to
electromagnetic compatibility and Directive 2006/95/EC on the harmonization of
the laws of Member States relating to electrical equipment for use within certain
voltage limits. Hannspree cannot accept responsibility for any failure to satisfy
the requirements resulting from a non-recommended modification of the device.
Description of Warning Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
3
English
Safety Notices
Installation Safety Notes
Location
Avoid allowing the TV to get prolonged exposure to sunlight or other strong
sources of heat. Leave sufficient distance between the TV and the wall to
provide enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Notes:
•
•
4
The LCD TV is for entertainment use only and visual display
tasks are excluded.
This device uses a VGA connector to connect to a PC. To reduce
the influence of main frequency on the source signal, use a VGA
monitor cable with ferrite shield.
English
Personal Safety
1. To avoid overloading the power supply, never plug too many electrical
devices into an outlet, power strip, or extension cable.
2. Dangerous high-voltage electric power components are located inside the
TV. To avoid electric shock, do not disassemble the casing.
3. Do not place or drop metals, small objects, or flammable materials into
the vent of the TV.
4. If the TV is dropped, falls down, or is otherwise damaged, unplug the
power cord immediately and contact an authorized service technician.
5. If any fluid is sprayed or dropped into the TV, contact an authorized
service technician.
6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the
screen is broken, do not touch the broken glass.
7. Do not allow children to use the TV unattended.
8. Be careful when disconnecting the power plug. Hold the plug. Do not
attempt to disconnect the plug by pulling on the power cord.
Installation
1. Do not place the TV in locations where there is excessive steam or dust.
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet,
or in a sealed cabinet.
3. Install the outdoor antenna away from power transmission lines to avoid
possible danger.
5
English
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD
TV). Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or
operating your TV. To ensure the safe and correct installation and operations of
the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV.
The information in this manual has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not
be liable for direct, indirect, special, exemplary, incidental or consequential
damages arising from any defect or omission in this manual, even if advised of
the possibility of such damages in advance.
Warranty and Service
For complete warranty service information, please refer to the “Warranty Card”
enclosed with your TV.
6
English
Copyright
© Copyright 2009 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under
licenses restricting its use, copying and distribution. No part of this manual may
be reproduced in any form by any means without the prior written authorization
of Hannspree. The TV described in this manual may include copyrighted
software of Hannspree (or other third parties). Hannspree (or other third parties)
preserves the exclusive rights for copyrighted software, such as the right to
distribute or reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the product
described herein shall not be distributed, modified, reverse engineered, or
reproduced in any manner without the prior written authorization of Hannspree
(or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other
product names, trademarks or logos mentioned herein are used for identification
purpose only, and may be the trademarks or registered trademarks of their
respective owners.
The purchase of the product described herein shall not be deemed to grant,
either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a
product.
Trademark Notice
Hannspree products incorporate High-Definition Multimedia
Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
7
1
English
1.1
Getting Started
Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or damaged.
•
TV
•
User’s manual
•
Quick start guide
•
Warranty card
•
Power cord
•
Remote control and batteries
•
TV cleaning cloth
According to WEEE regulation, this TV can’t be handled as normal
trash in Europe when it is out of usage. Please refer to the recycle
information from our website to handle it.
8
Introducing the TV
You can watch SECAM/ PAL/ DVB-T broadcast, cable, or digital television channels,
and easily connect a VCR, STB or DVD player to the SCART, HDTV (Component),
AV(Composite), and HDMI input ports (location of these ports depends on model).
You can also use the TV as a monitor for your PC by connecting it through the VGA
port.
Convenient control buttons located on the TV and a handy remote control let you
change channels, adjust the volume, and change display settings through an easyto-use on-screen display menu system. The built-in stereo speakers provide full rich
sound and a convenient audio output port lets you connect to an external audio
system or earphones.
1.3
Features
• TV Tuner: Built-in TV Tuner
• Audio/ Video support:
– SCART inputs
– VGA (PC) input
– HDMI inputs
– HDTV (Component) input
– R/L audio inputs
– PC line input
– 3.5 mm stereo earphone
output
– AV(Composite) input
• On-Screen Display (OSD) menu
system
• Teletext (TV RF+SCART) 1.5v.
with 500 pages memory
• Built-in stereo speakers
• Image Enhancement Technology
– 3:2/2:2 pull down
– 3D Comb Filter
– HD-ready TV
• Noise Reduction
• Advanced 3D de-interlacing
• Edge Enhancement
Note:
• The supporting devices mentioned in this manual may vary on different models.
For more information, please refer to the manufacturer’s user manual or the
Quick Start Guide of your TV model.
9
English
1.2
English
1.4
Control Panel
Description
Button
Power
Function
Press to turn the TV on or off.
Input source
INPUT
Press to select the proper input source.
Menu
MENU
Press to open the OSD menu.
Program select
PS
Press to increase the program number or
move upward to the previous item on the
OSD menu.
Program select
PT
Press to decrease the program number or
move downward to the next item on the OSD
menu.
Volume adjust
VOL +
Press to increase the volume or move to the
right on the OSD menu.
Volume adjust
VOL -
Press to decrease the volume or move to the
left on the OSD menu.
Remote IR
sensor
Receive incoming remote control commands.
Power/ Standby
indicator
Indicate power or standby status, power
on/off represent to Green/Red light
indicators.
Speakers
Deliver high-quality sounds.
1.5
Input and Output Jacks
Description
Cable/Antenna
10
Connector
TV / DTV
CABLE / ANTENNA
Function
Connect to an antenna or cable TV.
Connector
Earphone Output
Component/
CVBS Inputs
audio
Component
Inputs (Video)
Function
Connect to earphones or external
speakers with built-in amplifier.
EAR
PHONE
AUDIO
R
Y
L
Pb
PC Audio Input
Pr
PC LINE IN
SCART IN/OUT
SCART IN/OUT
VGA (PC) Input
English
Description
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to a PC’s line/ audio out port.
Connect to an external device, such as a
VCR, STB, or a DVD player with AV, SVideo, RGB, L/R IN, Analog TV Out, and
L/R Out.
Connect to a PC’s VGA port.
VGA
Service
SERVICE
Video
VIDEO
CI
HDMI 1 Input
HDMI 2 Input
Service only. Not available for users.
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to a CI device.
CI
HDMI 1
HDMI 2
Connect a HDMI equipment or an HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
Connect a HDMI equipment or an HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
11
English
Description
Connector
Power Connector
1.6
AC IN
Function
Connect to the included power cord.
Remote Control
Description
Icon
Power
Input Signal
Type
Press to turn the TV on or off.
INPUT
Last
Press to select the input signal type selections:
TV, DTV, SCART, AV, HDMI 1, HDMI 2, HDTV,
and PC.
Use to select a program directly. Press 0-9 to
enter the program numbers (press 1 and 0 for
program 10).
Keypad
Pro.List
Function
Pro.LIST
LAST
Press to display the features contained.
Press to return to the last channel selected.
1. Press to display current channel/program
information.
Information
INFO
Menu
MENU
OK
12
OK
2. During DTV menu selection, press to display
help information about Channel Organizer,
Channel Sorting, Channel Grouping, Time and
Parental Rating.
Press to turn the on-screen display (OSD)
menu on/ off.
Press to confirm selection.
Icon
Function
Press up, down, left or right to scroll through
the on-screen display menus.
Arrows
Electronic
Program
Guide
EPG
Press to display detailed programming
information for channels (only for DTV).
Teletext mode
TEXT
Press to active teletext.
Volume adjust
Mute
VOL
/ VOL
MUTE
P
/P
Red, Green,
Yellow, Blue
Index
Mix
Adjust size
Press VOL + to increase audio volume.
Press VOL - to decrease audio volume.
Press to eliminate sound. Press it again or
press the volume adjust buttons to restore
sound.
Press to change the multi sound selection of
the TV channel.
Dual sound
Select
program
English
Description
Press PS to increase the program number.
Press PT to decrease the program number.
Press the colored buttons to perform specific
tasks in the OSD menu or teletext mode.
INDEX
Press to display a table of the available teletext
subjects.
(Programmable in the teletext mode only)
MIX
Press to display the teletext over the program
on the screen. (Programmable in the teletext
mode only)
SIZE
Press to adjust screen size. (Programmable in
the teletext mode only)
13
English
Description
Subtitle
Icon
SUBTITLE
Function
With an ATV source, if teletext mode is
activated and the teletext has a subtitle page,
press to display the subtitle page.
With a DTV source, press to display the subtitle
OSD, and select the language.
Press to inactivate automatic page change
which only occurs when more than one teletext
page exists.
(Programmable in the teletext mode only)
Hold
HOLD
Reveal
REVEAL
Sound Mode
SOUND
Picture Mode
PIC
Press continuously to toggle through all the
picture setting: Vivid, Soft, User, Standard.
Favorite
channel
FAV.
Press to open favorite list menu and press
/
to select channels. Press OK to go to
the selected channel.
Freeze
Sleep timer
Aspect ratio
14
FREEZE
SLEEP
ASPECT
Press to display the hidden information, such
as solutions to puzzles. (Programmable in the
teletext mode only)
Press continuously to toggle through all the
sound setting: Standard, Music, Movie,
Speech, or User.
Press to pause a video frame on-screen.
(Programmable in the TV source only)
Press repeatedly to set the sleep timer (15, 30,
45, 60, 90 or 120 minutes).
Cancel the timer by selecting the Sleep Off
option.
Press to adjust the width-to-height ratio of the
image with aspect ratio: AUTO, Full, Normal,
Panorama, Zoom, Subtitle and Wide.
15
English
Note:
• For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and ensure
that there are no obstacles between them.
English
1.7
1
Inserting the Remote Control Batteries
Open the battery compartment cover at the back of the remote control (A).
(A)
2
Insert the batteries paying attention to the polarity markings inside the
battery compartment (B).
(B)
3
Replace the battery compartment cover (C).
(C)
16
English
CAUTION
•
If the remote control is not used for a long period, remove the
batteries and store them properly.
•
Handle damaged or leaking batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
•
If your remote control has two batteries, do not mix new and old
batteries, or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
•
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
•
Refer to your local recycling or waste disposal rules and contact a
local waste disposal vendor to dispose of used batteries.
•
The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash
media close to the cover.
•
Do not use force when pulling the remote control cover open; you
may damage the hinge.
17
2
English
2.1
2.1.1
Setting up your TV
Basic Connections
Power Connection
1
Connect the power cord to the AC IN input jack on the rear of the TV.
2
Insert the plug at the other end of the power cord into a power outlet.
2.1.2
Connecting an Antenna or Cable TV
Connect one end of the VHF/UHF (Antenna) or CATV cable to TV/DTV jack on the
rear of the TV.
Antenna
TV / DTV
CABLE / ANTENNA
Ground Clamp
Coaxial Cable
Ground
Note:
• Images are for illustration only and may vary by model or region.
• If you cannot receive channels after connecting to an antenna or cable TV line,
try scanning for channels.
18
Connecting External Devices
Connect external devices such as VCRs, STBs, DVD players, video game consoles,
earphones, or a PC to the TV using the appropriate ports on the rear of the TV.
2.2.1
Connecting External Earphones
Headphones
EAR
PHONE
Speakers
(Built-in Amplifiers)
Note:
• External speakers or headphones are not included with the TV.
• The internal TV speakers will not output sound when headphones are
plugged in.
• Use external speakers with built-in amplifiers only.
• Only one external device for sound can be connected at a time.
19
English
2.2
English
2.2.2
Connecting to AV Devices
The following diagram illustrates how to connect the AV devices to your TV via HDMI
(A), Component/AUDIO (B), SCART (C), VIDEO/ AUDIO (D) ports.
A
C
B
D
AUDIO
or
HDMI 1
R
L
Y
Pb
or
Pr
or
HDMI 2
VIDEO
AUDIO
R
SCART
SCART Adapter
(Optional)
NO
O
/M
-L
O
DI
AU
RO
DE
VI
HDMI Cable Audio Cable
(Optional)
(Optional)
HDMI
Video Game
Console
O
DE
VI
S.
Video Cable
(Optional)
Audio/
Video
Cable
(Optional)
R L Y PB PR
L
SCART
Cable
(Optional)
R VIDEO S-VIDEO
SCART
Audio/Video
Cable
(Optional)
VIDEO R
L
VCR
or
STB
DVD
Note:
The audio ports shown in Component (B) and Video Audio (D) are physically
the same ports. Only a set of the audio ports can be selected when
connecting AV devices.
20
L
English
2.2.3
Connecting a VCR/ STB/ DVD Player Using
Component Video
Connect the TV to a VCR/ STB/ DVD player using the component video inputs.
AUDIO
R
L
Y
Pr
Pb
VCR
Audio Cable
STB
(Optional)
DVD
Video Cable
(Optional)
VIDEO
AUDIO
R
L
Video Cable
(Optional)
VCR
Audio Cable
STB
(Optional)
DVD
21
Connecting a PC using VGA
Connect the TV to your PC to use it as the monitor using the VGA port as shown.
1
2
Connect the VGA port of the TV to the VGA output of the PC.
Connect the line out port of the PC to the PC LINE IN port of your TV to
listen to audio from the PC.
VGA
PC LINE IN
Audio Cable
(Optional)
PC
VGA Cable
(Optional)
2.2.5
Connecting a PC using DVI
Connect the TV to your PC to use it as the monitor using the DVI port as shown.
1
2
Connect the HDMI port of the TV to the DVI output of the PC.
Connect the line out port of the PC to the PC LINE IN port of your TV to
listen to audio from the PC.
HDMI 1
HDMI 2
PC LINE IN
Audio Cable
(Optional)
HDMI
English
2.2.4
HDMI to DVI Cable
(Optional)
22
PC
English
2.2.6
Connecting HDMI
HDMI (High Definition Multimedia Interface) assures that the best video signal is
always sent from source to the TV. Refer to the following illustration to connect an
HDMI device to the TV.
HDMI 1
HDMI 2
DVD Player
HDMI Cable
(Optional)
Note:
When the HDMI cable is connected, connecting the audio cable is not necessary.
However, it is necessary to do so if a HDMI to DVI cable is connected.
2.2.7
Connecting USB
Service port, for DVT F/W update only.
SERVICE
USB Drive
(Optional)
23
English
2.2.8
Connecting a VCR/ STB/ DVD Player using SCART
Connect the SCART (optional) to connect a TV, VCR, VCD, DVD player or video
game console. You can choose to use a SCART cable or adapter for the connection
depending on the ports available on your player.
SCART
SCART
(Optional)
O
N
O
/M
-L
IO
D
U
-A
R
EO
D
VI
EO
D
VI
S.
SCART Cable
(Optional)
Connect to
AV connectors
Connect to
S-video connectors
Note:
• The S-Video connector and AV connectors cannot be connected at the
same time, or the wrong signals might be generated.
• The cables are color-coded (black, red, white, and yellow). Connect each
color-coded cable to the appropriate connector on your device.
24
Using the TV
2.3.1
1
English
2.3
Press
Turning the TV On and Off
on the control panel or remote control. The power LED indicator on
the TV changes from red to green, indicating that the TV is on.
2
Press
again. The power LED changes from green to red, indicating that
the TV is off.
2.3.2
Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal.
2.3.3
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press MENU on the control panel or remote control, then select to enter the
Channel menu.
2
Select Auto Search.
3
Press
2.3.4
on the remote control to run the channel search.
Selecting Channels
•
Press PS on the remote control or control panel to increase the channel
number.
•
Press PT on the remote control or control panel to decrease the channel
number.
•
Enter the specific channel number by pressing the number buttons on the
remote control.
2.3.5
Adjusting the Volume
1
Press VOL+ on the control panel or remote control to increase the volume.
2
Press VOL- on the control panel or remote control to decrease the volume.
3
Press MUTE to eliminate sounds, and press MUTE again or press the
volume buttons to restore the original volume.
25
3
English
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to
adjust the TV settings. The OSD menu can be accessed conveniently through the
buttons on the remote control.
Before going into details of each OSD option, you may get acquainted with the
placement of the OSD system:.
CURRENT MENU:
Displays the title of the
currently selected menu.
MAIN MENU:
Displays a list
of menu items.
The selected
item is
highlighted by
a dark blue
color than
other menu
items.
Setup
Language
TT Language
SCART
HDMI Scan Info
Aspect
HDMI Audio
X-Contrast
OSD Time
Move
English
West
AUTO
AUTO
Full
HDMI
Off
60 Secs
Select
Menu
Return
ADJUSTABLE Options:
INSTRUCTIONS:
Displays the setting/value
of the adjustable options.
Quick instructions for
adjusting the settings.
Function
TV Control Panel
Remote Control
OSD Menu
MENU
MENU
Up
PS
Arrow
Down
PT
Arrow
Select/ Increase
VOL +
Arrow
Select/ Decrease
VOL –
Arrow
Return
MENU
MENU
26
English
3.1
OSD Setting Menus
Follow the instructions indicated on the down side of the OSD Function Menu. Press
/
arrow keys to scroll through the menus, VOL
PS/PTon the control panel or
+ on the control panel or the arrow key to select an item, or MENU to exit the OSD
menu.
The following menus can be set by different adjustment methods.
3.2
1
Adjusting Picture Settings
Press MENU to enter the OSD Main Menu
screen. The Picture menu is then
displayed.
2
Press
3
4
Press
5
6
Picture
Picture Mode
Brightness
Contrast
Sharpness
Colour
Hue
Backlight
Colour Temp
to enter the Picture menu.
/
to select an item.
Press
/
to adjust the scales or
options settings.
Move
Standard
50
50
5
50
50
5
2
Standard
Select
Menu
Return
Press MENU to return to the Picture menu.
Press MENU to exit the OSD menu.
- The Picture menu can be used to adjust the Picture Mode, Brightness, Contrast,
Sharpness, Colour, Hue, Backlight, and Colour Temp settings.
• The Picture Mode can be set to Standard, Vivid, Soft, or User.
• The Brightness, Contrast, Colour, and Hue (NTSC only) can be adjusted by
pressing
/
to move the scales from 0-100.
• The Sharpness can be adjusted by pressing
/
to move the scales from 0-9.
• The Backlight helps to manually turn down the backlight in dark scenes,
generating a deeper black color. Press
/
to adjust the scales from 1-10.
• The Colour Temp can be set to Standard, Warm, or Cool.
Note: The options available on the OSD may vary depending on the input signal
source.
27
English
3.3
1
Adjusting Sound Settings
Press MENU to enter the OSD Main
Menu screen.
2
3
Press
4
Press
5
Press
/
settings.
6
7
Press MENU to return to the Audio menu.
Press
Sound
Sound Mode
Balance
Treble
Bass
to select the Audio menu.
to enter the Audio menu.
/
Standard
0
50
50
to select an item.
adjust the scales or options
Move
Select
Menu
Return
Press MENU to exit the OSD menu the OSD menu.
- The Audio menu can be used to adjust the Sound Mode, Balance, Treble, and Bass
settings.
• The Sound Mode can be set to Standard, Music, Movie, Speech, or User.
• The Balance can be adjusted by pressing
/
to move the scales from -50 to
50.
• The Treble and Bass can be adjusted by pressing
/
to move the scales from
0-100.
Note: The options available on the OSD may vary depending on the input signal
source.
3.4
1
2
3
4
Adjusting Channel Settings
Press MENU to enter the OSD Main Menu
screen.
Press
to select the Channel menu.
Press
Channel
Area
Channel
Colour System
Sound System
Auto Search
Manual Search
Fine Tune
AFC Lock
to enter the Channel menu.
Press
/
to select an item.
5
Press
/
settings.
6
7
Press MENU to return to the Channel menu.
adjust the scales or options
Move
Germany
15
AUTO
AUTO
241.25 MHz
Off
Select
Menu
Return
Press MENU to exit the OSD menu.
- The Channel menu can be used to adjust the Area, Channel, Colour System, Sound
System, Auto Search, Manual Search, Fine Tune, AFC Lock, Channel Edit and
Parental Lock settings.
28
Poland, Netherlands, and Other.
• Channel can be used to select channels by pressing
/
.
• The Colour System can be set to AUTO, PAL, and SECAM.
• The Sound System can be set to AUTO, BG, DK, I, L, and L’.
• Select Auto Search to activate the automatic TV channel search. Select Manual
Scan to search the TV channels manually.
Auto Search
Channel
Manual Search
1
Channel
63.55 MHz
144.95 MHz
Menu
• Press
/
1
Exit
Menu
Exit
to adjust the channel frequency in Fine Tune.
• The AFC Lock can be set to On or Off.
• Press
to enter the Channel Edit menu, the Channel Editor allows you to edit
the detailed items, including Name, Skip, Fav and Lock for each channel.
29
English
• The Area can be set to Germany, UK, Italy, Spain, Portugal, France, Hungary,
English
- To change the channel name, select the channel and press
/
to open Channel
Editor. Input the channel name you prefer using the on screen keys and select Save.
Channel Editor
Channel Frequency
1
223.25
2
223.25
3
235.30
4
241.30
5
259.25
6
271.25
7
277.25
8
283.25
9
289.30
10
301.30
Skip
Move
Name
---------------------
Del
Rename
Skip
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Fav.
Swap
Fav.
Fav.
Lock
Channel Editor
0
1
2
3
4
5
6
7
8
9
{
}
[
]
a
b
c
d
e
f
g
h
i
j
<
>
(
)
!
k
l
m
n
o
p
q
r
s
t
|
#
$
%
^
v
w
x
y
z
@
?
\
/
=
+
&
*
-
_
:
;
"
,
Menu
Return
u
Save
Menu
Lock
Return
Caps
Move
Del
Ok
Enter
~
- Press the Red button on the remote control to skip the channels.
- Press the Green button on the remote control to delete the channels.
- Press the Yellow button on the remote control to swap the channels.
- Press the Blue button on the remote control to lock the channels.
- Press the Up / Down button on the remote control to move the channels.
- Press the Left / Right button on the remote control to rename the channels.
- Press the FAV button on the remote control to add favorite channels.
- Press the Menu button on the remote control to exit Channel Editor.
• The Parental Lock allows you to change the password.
- Press the Keypad on the remote control to enter the passwords.
Note: The Channel Settings are only available in TV mode.
3.5
1
Adjusting DTV Settings
Press MENU to enter the OSD Main
Menu screen.
2
3
Press
4
5
Press
6
7
Press
DTV
Channel Management
Area
Auto Search
Manual Search
Preferred Audio
Preferred Subtitle
Parental Lock
Subtitle Type
to select the DTV menu entry.
to enter the DTV menu.
/
to select an item.
Press
/
to change the scales or
options settings.
Move
Select
UK
English
Off
Normal
Menu
Return
Press MENU to return to the DTV menu entry.
Press MENU to exit the OSD menu.
- The DTV menu can be used to adjust the Channel Management, Area, Auto Search,
Manual Search, Preferred Audio, Preferred Subtitle, Parental Lock, Subtitle Type,
Time, CI and Parental Rating.
30
English
• The Channel Management selections include Channel Organizer, Channel
Sorting, Channel Grouping, and Delete All TV Channels.
• The Area can be set to Germany, UK, Italy, Spain, Portugal, France, Hungary,
Poland, Netherlands and Other.
• Select Auto Search to activate the automatic TV channel search. Select Manual
Scan to search the TV channels manually.
Cannel Search
S.No
TV Channel
S.No
Channel 35 UHF
Progress
Manual Search
Channel Name
Frequency(KHz)
Bandwidth
Radio Channel
Signal
Quality
Select
586000KHz/8M
28%
21
474000
8M
48%
0%
Menu
Return
• Preferred Audio can be set to English, France, Germany, Italy, Spain, Portugal,
Denmark, and Czech.
• Preferred Subtitle can be set to Off, English, France, Germany, Italy, Spain,
Portugal, Denmark, and Czech.
• The Channel Organizer supports channel swap function. To select one channel
that you prefer to exchange, press the Yellow button on the remote control, then
press the numeric button on the remote control to input the channel that you want
to exchange with, press the OK button on the remote control to complete.
• The Parental Lock allows you to change the password.
Parental Lock
Enter Old Password
Enter New Password
Confirm New Password
0
9
Press 0 to 9
Menu
Cancel
Note: The original password is set to 0000 by default.
31
English
• The Subtitle Type can be set to Normal or Hearing Impaired.
• The Time selection includes GMT Offset and Summer Time.
- Press
/
to adjust the GMT Offset to AUTO, Germany, UK, Italy, France,
Spain, Netherlands, Taiwan, China, Norway, Sweden, Finland, Greece,
Australia, Russia, Ireland, Denmark, Portugal, Turkey, or Poland.
- Press
/
to adjust Summer Time to On or Off.
Time
GMT Offset
Summer Time
Move
AUTO
Off
Select
Menu
Return
• Select CI to access the Common Interface.
DTV
Time
CI
Parental Rating
Move
- Press
Select
Menu
Return
to enter the Common Interface menu.
• The Parental Rating allows you to select Parental Rating.
System Setup
Parental Rating
Select
Off
Menu
Return
- Press the Keypad on the remote control to enter the passwords.
- Press
/
to adjust the Parental Rating from 4 to 18 or Off.
32
1
English
3.6
Adjusting PC Settings
Press INPUT and select PC as the signal
type.
2
Press MENU to enter the OSD Main
Menu screen.
3
4
Press
5
Press
6
Press
/
settings.
7
8
Press MENU to return to the PC menu.
Press
Pc Setup
Auto Adjust
H Position
V Position
Phase
Clock
to select the PC menu.
Off
0
0
0
0
to enter the PC menu.
/
Move
to select an item.
Select
Menu
Return
adjust the scales or options
Press MENU to exit the OSD menu the OSD menu.
- The PC menu can be used to adjust the Auto Adjust, H Position, V Position, Phase
and Clock settings.
• The Auto Adjust can be set to On or Off.
• The H Position and V Position can be adjusted by pressing
/
to move the
scales from -16 to 16.
/
• The Clock can be adjusted by pressing
• Phase can be adjusted by pressing
/
to move the scales from -50 to 50.
to move the scales from 0 to 31.
33
English
3.7
1
Adjusting Setup Settings
Press MENU to enter the OSD Main
Menu screen.
2
Press
entry.
3
Press
4
5
Press
6
7
Press MENU to return to the Setting menu entry.
Setup
Language
TT Language
SCART
HDMI Scan Info
Aspect
HDMI Audio
X-Contrast
OSD Time
to select the Setting menu
to enter the Setting menu.
/
to select an item.
Press
/
to change the scales or
options settings.
Move
English
West
AUTO
AUTO
Full
HDMI
Off
60 Secs
Select
Menu
Return
Press MENU to exit the OSD menu.
- The Setting menu can be used to adjust the Language, TT Language, SCART, HDMI
Scan Info, Aspect, HDMI Audio, X-Contrast, OSD Time, Reset, Background and
Initail Setup.
• The available Language selections are English, Italiano, Español, Português,
Français, Deutsch, Magyar, Polski, and Nederlands.
• The available TT Language selections are West, East, Hungary, Arabic, and
Farsi.
• The SCART selections include AUTO, CVBS, RGB, and S-VIDEO.
• The available selections in HDMI Scan Info are AUTO, Overscan, Underscan.
(Available only when signals are provided via a HDMI connection)
• The available Aspect selections include AUTO, Full, Normal, Panorama, Zoom,
Subtitle and Wide.
• The available HDMI Audio selections include HDMI and Analog In.
(Available only when signals are provided via a HDMI connection)
• The X-Contrast can be set to On or Off.
• OSD Time can be set to 10 Secs, 20 Secs, 30 Secs, and 60 Secs.
• Select Reset Setting to reset settings to the defaults.
• Background can be set to Blue or Off.
• Select Initial Setup to do Channel auto search.
34
Type
4:3
16:9
Content
AUTO
Full
Wide
Nomal
Subtitle
Zoom
Panorama
Note: The options available on the OSD may vary depending on the input signal
source.
35
English
• The Aspect mode selections include Auto, Full, Wide, Normal, Subtitle, Zoom,
and Panorama. The following pictures are settings for HDMI/1080P, please see
below for details.
4
English
Troubleshooting
Situation
Solution
•
•
Connect the power cord properly.
Check if the power LED is on or not.
No picture and sound.
•
•
•
•
Press
on the control panel or remote control.
Press Input to cycle through connected video sources.
Press PS or PT to switch to other TV programs.
Make sure all cables are connected properly.
No picture, or poor picture,
sound is OK.
•
•
Check the antenna and cable connections.
Adjust the brightness in the Picture OSD menu.
Picture is not in color.
•
Adjust the colour option in the Picture OSD menu.
Picture is OK, no sound.
•
•
•
•
Make sure the source device is functioning properly.
Make sure the audio cable is connected securely.
Turn the mute off.
Press VOL + on the control panel or remote control.
One of the speakers has no
sound.
•
Adjust the balance in the Audio OSD menu.
Cannot receive some TV
channels using cable TV.
•
Try the Auto Search function in the Channel or DTV
OSD menu.
Want to reset TV settings.
•
Use the Reset function in the Setup OSD menu.
•
If OSD items are colored in gray, the system is in a state
such that those settings are not available.
Cannot operate menus.
Screen image turns over.
•
Make sure the video signal cable is connected properly.
•
Adjust the location of the antenna, placing it far from
roads or sources of interference.
Check the antenna and the video signal line connections.
Snow appears on the screen.
•
Blurred or overlapped
images.
•
•
•
Adjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or replace the video
signal cable.
Remote control doesn’t work.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote control and the
sensor is clear.
Try operating the remote control at a closer distance to
the TV.
•
36
5
English
Support Timing
PC Mode Support Timing
Mode
Resolution
(active dot)
Horizontal
Frequency (KHz)
Vertical
Frequency (Hz)
Nominal Pixel
Clock (MHz)
PC (VGA)
DVI to HDMI
VGA
[email protected]
31.469
59.941
25.175
V
V
SVGA
[email protected]
37.879
60.317
40
V
V
XGA
[email protected]
48.363
60.004
65
V
V
VESA
[email protected]
44.955
59.94
74.176
V
V
VESA
[email protected]
60
60
108
V
V
SXGA
[email protected]
63.981
60.02
108
V
V
WXGA+
[email protected]
55.935
59.887
106.5
V
V
[email protected]
Reduced Blanking
66.587
59.934
138.5
V
V
VESA
WUXGA
[email protected]
74.083
60
154
V
(To acieve the best performance in the PC Mode (1920x1200) connect the HDMI cable to the PC)
Video Mode Support Timing
Resolution(active dot)
HDMI
[email protected]
V
[email protected]
V
HDTV (Component)
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
[email protected]
V
V
37
6
English
Specifications
Screen Size
70 cm / 27.5”
LCD Panel
1920x1200
Input Function
RF In
SCART
AV
Component
Component Audio RCA in
HDMI x 2
VGA
VGA PC Line in
CI support 5V
Output Function
Earphone Out
Speaker 10W+10W
SCART Out
Feature
Full HD
HD Ready
3D Combo Filter
3D De Interlacer
Noise Reduction
3:2/2:2 Pull down
X-Contrast (10000:1)
24p input
38
1
2
3
Dissembling the stand base
Disconnect all the cables and cords from the TV to prevent breakage.
Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
Press the stand lock on both sides, remove the stand.
( For reference only )
Wall mounting the TV:
1
2
3
4
Purchase a VESA compatible wall bracket:
VESA 100 X 200, 6 holes, M4, 14mm, 20 kg.
Locate your ideal TV position on the wall.
Fix the wall bracket firmly on the wall.
Secure the TV to the bracket using the 6
mount holes on the back and center of the
TV.
Note:
•
•
•
•
•
Please read the instructions of your specific wall bracket to properly wall mount
the TV.
The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
The screws type required is metric: M4, 14 mm length.
The 28" TV stand base can be screwed on a table or a hard surface using the
hole on the back of the stand base.
The leaves are meant as designs only, please do not remove.
*Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask
a qualified service personnel about using an optional bracket to mount the TV to the wall.
39
English
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement