Hanns.G SJ42DMBB LCD TV

Hanns.G SJ42DMBB LCD TV
Regulatory Information ................................................................ 3
Description of Warning Symbols .................................................. 3
Safety Notices ............................................................................. 4
Preface ....................................................................................... 6
Warranty and Service .................................................................. 6
1. Getting Started ........................................................................ 8
1.1 Package Contents ............................................................. 8
1.2 Introducing the TV ............................................................. 9
1.3 Features ........................................................................... 9
1.4 Control Panel .................................................................. 10
1.5 Input and Output Jacks .................................................... 10
1.6 Remote Control ............................................................... 12
1.7 Inserting the Remote Control Batteries ............................. 16
2. Setting up your TV ................................................................. 18
2.1 Power Connection ........................................................... 18
2.2 Rear Connections ............................................................ 18
2.3 Using the TV ................................................................... 20
2.3.1 Turning the TV On and Off ...................................... 20
2.3.2 Switching Source Signals ........................................ 20
2.3.3 Performing an Automatic Channel Search ................ 20
2.3.4 Selecting Channels ................................................. 20
2.3.5 Adjusting the Volume .............................................. 20
3. Adjusting On-Screen Display (OSD) Settings .......................... 21
3.1 OSD Setting Menus ......................................................... 22
3.2 Adjusting Picture Settings ................................................ 22
3.3 Adjusting Sound Settings ................................................. 23
3.4 Adjusting TV Settings ...................................................... 24
3.5 Adjusting Features Settings ............................................. 27
3.6 Adjusting Parental Settings .............................................. 29
1
English
Table of Contents
Table of Contents
English
4. Troubleshooting ..................................................................... 30
5. Support Timing ...................................................................... 31
6. Specifications ........................................................................ 32
7. Dissembling the stand base .................................................... 33
8. Using the Cable Organizer ..................................................... 34
2
English
Regulatory Information
CE Conformity Statement
This device is in conformity with the requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to
electromagnetic compatibility and Directive 2006/95/EC on the harmonization of
the laws of Member States relating to electrical equipment for use within certain
voltage limits. Hannspree cannot accept responsibility for any failure to satisfy
the requirements resulting from a non-recommended modification of the device.
Description of Warning Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
3
English
Safety Notices
Installation Safety Notes
Location
Avoid allowing the TV to get prolonged exposure to sunlight or other strong
sources of heat. Leave sufficient distance between the TV and the wall to
provide enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
WARNING
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
4
English
Notes:
•
•
The LCD TV is for entertainment use only and visual display
tasks are excluded.
This device uses a VGA connector to connect to a PC. To reduce
the influence of main frequency on the source signal, use a VGA
monitor cable with ferrite shield.
Personal Safety
1. To avoid overloading the power supply, never plug too many electrical
devices into an outlet, power strip, or extension cable.
2. Dangerous high-voltage electric power components are located inside the
TV. To avoid electric shock, do not disassemble the casing.
3. Do not place or drop metals, small objects, or flammable materials into
the vent of the TV.
4. If the TV is dropped, falls down, or is otherwise damaged, unplug the
power cord immediately and contact an authorized service technician.
5. If any fluid is sprayed or dropped into the TV, contact an authorized
service technician.
6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the
screen is broken, do not touch the broken glass.
7. Do not allow children to use the TV unattended.
8. Be careful when disconnecting the power plug. Hold the plug. Do not
attempt to disconnect the plug by pulling on the power cord.
Installation
1. Do not place the TV in locations where there is excessive steam or dust.
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet,
or in a sealed cabinet.
3. Install the outdoor antenna away from power transmission lines to avoid
possible danger.
5
English
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD
TV). Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or
operating your TV. To ensure the safe and correct installation and operations of
the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV.
The information in this manual has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not
be liable for direct, indirect, special, exemplary, incidental or consequential
damages arising from any defect or omission in this manual, even if advised of
the possibility of such damages in advance.
Warranty and Service
For complete warranty service information, please refer to the “Warranty Card”
enclosed with your TV.
6
English
Copyright
© Copyright 2010 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under
licenses restricting its use, copying and distribution. No part of this manual may
be reproduced in any form by any means without the prior written authorization
of Hannspree. The TV described in this manual may include copyrighted
software of Hannspree (or other third parties). Hannspree (or other third parties)
preserves the exclusive rights for copyrighted software, such as the right to
distribute or reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the product
described herein shall not be distributed, modified, reverse engineered, or
reproduced in any manner without the prior written authorization of Hannspree
(or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other
product names, trademarks or logos mentioned herein are used for identification
purpose only, and may be the trademarks or registered trademarks of their
respective owners.
The purchase of the product described herein shall not be deemed to grant,
either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a
product.
Trademark Notice
Hannspree products incorporate High-Definition Multimedia
Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
License Notice and Trademark Acknowledgment
Manufactured uder license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
7
1
English
1.1
Getting Started
Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or damaged.
•
TV
•
User’s manual
•
Quick start guide
•
Warranty card
•
Power cord
•
Remote control and batteries
•
TV cleaning cloth
•
Stand screws x 4 (for 27.5”/31.5”/42”)
According to WEEE regulation, this TV can’t be handled as normal
trash in Europe when it is out of usage. Please refer to the recycle
information from our website to handle it.
8
Introducing the TV
You can watch SECAM/ PAL/ DVB-T broadcast, cable, or digital television channels,
and easily connect a VCR, STB or DVD player to the SCART, HDTV (Component),
AV (Composite), and HDMI input ports (location of these ports depends on model).
You can also use the TV as a monitor for your PC by connecting it through the VGA
port.
Convenient control buttons located on the TV and a handy remote control let you
change channels, adjust the volume, and change display settings through an easyto-use on-screen display menu system. The built-in stereo speakers provide full rich
sound and a convenient audio output port lets you connect to an external audio
system or earphones.
1.3
Features
• TV Tuner: Built-in TV Tuner
• Audio/ Video support:
– SCART inputs
– VGA (PC) input
– HDMI inputs
– HDTV (Component) input
– R/L audio inputs
– PC line input
– 3.5 mm stereo earphone
output
– AV (Composite) input
– SPDIF output
(27.5”/31.5”/42”)
– SPDIF output (digital audio
out) (18.5”/21.6”/24.6”)
• On-Screen Display (OSD) menu
system
• Teletext (TV RF+SCART) 1.5v.
with 100 pages memory
• Built-in stereo speakers
• Image Enhancement Technology
– 3:2/2:2 pull down
– 3D Comb Filter
– HD-ready TV
• Noise Reduction
• Advanced 3D de-interlacing
• Edge Enhancement
Note:
• The supporting devices mentioned in this manual may vary on different models.
For more information, please refer to the manufacturer’s user manual or the
Quick Start Guide of your TV model.
9
English
1.2
English
1.4
Control Panel
Description
Button
Power
Function
Press to turn the TV on or off.
Input source
INPUT
Press to select the proper input source.
Menu
MENU
Press to turn the on-screen display (OSD)
menu on / off.
Program select
PS
Press to increase the program number or
move upward to the previous item on the
OSD menu.
Program select
PT
Press to decrease the program number or
move downward to the next item on the OSD
menu.
Volume adjust
VOL +
Press to increase the volume or move to the
right on the OSD menu.
Volume adjust
VOL -
Press to decrease the volume or move to the
left on the OSD menu.
Remote IR
sensor
Receive incoming remote control commands.
Power/ Standby
indicator
Indicate power or standby status, power on/off
represent to Green/Red light indicators.
Speakers
Deliver high-quality sounds.
1.5
Input and Output Jacks
Description
Cable/Antenna
10
Connector
TV / DTV
Function
Connect to an antenna or cable TV.
Connector
Component
Inputs (Video)
PC Audio Input
Function
Connect to earphones or external
speakers with built-in amplifier.
Earphone Output
Component/
CVBS Inputs
(Audio)
English
Description
Connect to an external device, such as a
VCR, STB, or a DVD player.
L -AUDIO- R
Y
PR
PB
AUDIO
IN
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to a PC’s line / audio port.
SCART 1
Connect to an external device, such as a
VCR, STB, or a DVD player with AV, SVideo, RGB, L/R IN, Analog TV Out, and
L/R Out.
SCART 2
Connect to an external device, such as a
VCR, STB, or a DVD player with AV, SVideo, RGB, L/R IN, Analog TV Out, and
L/R Out.
SCART 1
SCART 2
VGA (PC) Input
VGA
Connect to a PC’s VGA port.
SERVICE
Service
Service only. Not available for users.
SERVICE
Video
VIDEO
Connect to an external device, such as a
VCR, STB, or a DVD player.
11
English
Description
Connector
CI SLOT
CI
HDMI 1 Input
HDMI 1
HDMI 2 Input
HDMI 2
HDMI 3 Input
HDMI 3
SPDIF
SPDIF
Power Connector
Function
Connect to a CI device.
Connect a HDMI equipment or an HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
Connect a HDMI equipment or an HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
Connect a HDMI equipment or an HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
Connect to a digital audio output device
such as a home theater.
Connect to the included power cord.
AC IN
1.6
Remote Control
Description
Icon
Power
Input Signal
Type
12
Function
Press to turn the TV on or off.
INPUT
Press to select the input signal type selections:
TV, DTV, SCART, AV, HDMI 1, HDMI 2, HDTV,
and PC.
Icon
Last
Function
Use to select a program directly. Press 0-9 to
enter the program numbers (press 1 and 0 for
program 10).
Keypad
Pro.List
English
Description
Pro.LIST
LAST
Press to display the programs contained.
Press to return to the last channel selected.
1. Press to display current channel/program
information.
Information
INFO
Menu
MENU
OK
OK
2. During DTV menu selection, press to display
help information about Channel Organizer,
Channel Sorting, Channel Grouping, Time and
Parental Rating.
Press to turn the on-screen display (OSD)
menu on / off.
Press to confirm selection.
Press up, down, left or right to scroll through
the on-screen display menus.
Arrows
Electronic
Program
Guide
EPG
Press to display detailed programming
information for channels (only for DTV).
Teletext mode
TEXT
Press to active teletext.
Volume adjust
Mute
VOL
/ VOL
MUTE
Press VOL + to increase audio volume.
Press VOL - to decrease audio volume.
Press to eliminate sound. Press it again or
press the volume adjust buttons to restore
sound.
13
English
Description
Icon
Press to change the multi sound selection of
the TV channel.
Dual sound
Select
program
Function
P
/P
Red, Green,
Yellow, Blue
Press PS to increase the program number.
Press PT to decrease the program number.
Press the colored buttons to perform specific
tasks in the OSD menu or teletext mode.
Press to display a table of the available teletext
subjects.
(Programmable in the teletext mode only)
Index
INDEX
Mix
MIX
Press to display the teletext over the program
on the screen. (Programmable in the teletext
mode only)
Adjust size
SIZE
Press to adjust screen size. (Programmable in
the teletext mode only)
SUBTITLE
With an ATV source, if teletext mode is
activated and the teletext has a subtitle page,
press to display the subtitle page.
With a DTV source, press to display the subtitle
OSD, and select the language.
Hold
HOLD
Press to inactivate automatic page change
which only occurs when more than one teletext
page exists.
(Programmable in the teletext mode only)
Reveal
REVEAL
Press to display the hidden information, such
as solutions to puzzles. (Programmable in the
teletext mode only)
Sound Mode
SOUND
Press continuously to toggle through all the
sound setting: Standard, Music, Movie,
Speech, or User.
Subtitle
14
English
Description
Icon
Picture Mode
PIC
Press continuously to toggle through all the
picture setting: Vivid, Soft, User, Standard.
FAV.
Press to open favorite list menu and press
/
to select channels. Press OK to go to
the selected channel.
Favorite
channel
Freeze
FREEZE
Sleep timer
SLEEP
Aspect ratio
ASPECT
Function
Press to pause a video frame on-screen.
(Programmable in the TV source only)
Press repeatedly to set the sleep timer (15, 30,
45, 60, 90 or 120 minutes).
Cancel the timer by selecting the Sleep Off
option.
Press to adjust the width-to-height ratio of the
image with aspect ratio: AUTO, Full, Normal,
Panorama, Zoom, Subtitle and Wide.
Note:
• For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and ensure
that there are no obstacles between them.
15
English
1.7
1
Inserting the Remote Control Batteries
Open the battery compartment cover at the back of the remote control (A).
(A)
2
Insert the batteries paying attention to the polarity markings inside the
battery compartment (B).
(B)
3
Replace the battery compartment cover (C).
(C)
16
English
CAUTION
•
If the remote control is not used for a long period, remove the
batteries and store them properly.
•
Handle damaged or leaking batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
•
If your remote control has two batteries, do not mix new and old
batteries, or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
•
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
•
Refer to your local recycling or waste disposal rules and contact a
local waste disposal vendor to dispose of used batteries.
•
The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash
media close to the cover.
•
Do not use force when pulling the remote control cover open; you
may damage the hinge.
17
2
Power Connection
1
Connect the power cord to the AC IN input jack on the rear of the TV.
2
Insert the plug at the other end of the power cord into a power outlet.
2.2
Rear Connections
See the illustration and table below for device connection instructions.
CI SLOT
Speaker system
9
CI-based
devices
L AUDIO R
Camcorder
PC
27.5”/31.5”/42” only
2
1
HDMI IN
Camcorder
VCR/VCD/DVD
STB
SCART
PC IN
AUDIO
IN
SERVICE
PC
8
VIDEO
DVD player
VGA
SCART 1
7
HDMI 1
Blu-ray Disc
player
27.5”/31.5”/42”
only
Video Game
Console
DVD player
Y
L
HDMI 2
PB
AUDIO
COMPONENT
3
PR
R
TV/DTV
SPDIF
SCART 2
SERVICE
SERVICE
4
HDMI 3
English
2.1
Setting up your TV
CABLE ANTENNA
5
6
VCR/VCD/DVD/STB
Video Game
Console
VCR
Home theater
18
TV cable / antenna
Earphone
Connector
1
VGA
English
No.
Notes / Instructions
• The VGA and audio cables are optional.
AUDIO In
2
HDMI 1
HDMI 2
HDMI 3
3
Component
Video Inputs
• The HDMI cable is optional.
• When the HDMI to HDMI cable is connected,
connecting the audio cable is not necessary.
However it’s necessary to do so if a HDMI to DVI
cable is connected.
• The video and audio cables are optional.
Component
Audio Inputs
4
SPDIF
5
SCART 1
SCART 2
6
Cable/Antenna
7
Earphone
8
Composite
Video Input
• The SPDIF cable is optional.
• If your AV devices are not equipped with SCART
connectors, you will also need a SCART adapter
except for a SCART to SCART cable.
• When a SCART adapter is used, the S-Video
connector and AV connectors cannot be
connected at the same time, or the wrong signals
might be generated.
• The SCART to SCART cable and SCART adapter
are optional.
• If you cannot receive channels after connecting to
a TV cable or antenna, try scanning for channels.
• The internal TV speakers will not output sound
when a speaker or earphone is plugged in.
• The video and audio cables are optional.
Composite
Audio Inputs
9
CI
• The Common Interface cable is optional.
Note:
The available connectors may vary depending on your TV model.
19
English
2.3
Using the TV
2.3.1
1
Press
Turning the TV On and Off
on the control panel or remote control. The power LED indicator on
the TV changes from red to green, indicating that the TV is on.
2
Press
again. The power LED changes from green to red, indicating that
the TV is off.
2.3.2
Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal.
2.3.3
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press MENU on the control panel or remote control, then select to enter the
Channel / DTV menu.
2
Select Auto Search.
3
Press
2.3.4
on the remote control to run the channel search.
Selecting Channels
•
Press PS on the remote control or control panel to increase the channel
number.
•
Press PT on the remote control or control panel to decrease the channel
number.
•
Enter the specific channel number by pressing the number buttons on the
remote control.
2.3.5
Adjusting the Volume
1
Press VOL+ on the control panel or remote control to increase the volume.
2
Press VOL- on the control panel or remote control to decrease the volume.
3
Press MUTE to eliminate sounds, and press MUTE again or press the
volume buttons to restore the original volume.
20
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to
adjust the TV settings. The OSD menu can be accessed conveniently through the
buttons on the remote control.
Before going into details of each OSD option, you may get acquainted with the
placement of the OSD system:.
Picture
Sound
MAIN MENUS:
TV
Displays a list of
menus.
Features
Parental
OK
Enter
Smart Picture
Standard
Brightness
Contrast
Colour
Tint
50
50
50
0
Sharpness
Colour Temperature
Advanced Control
3
Cool
Select
Menu
Exit
ADJUSTABLE Options:
INSTRUCTIONS:
Displays the setting/value
of the adjustable options.
Quick instructions for
adjusting the settings
Function
TV Control Panel
Remote Control
OSD Menu
MENU
MENU
Up
PS
Arrow
Down
PT
Arrow
Select/ Increase
VOL +
Arrow
Select/ Decrease
VOL –
Arrow
Return
MENU
MENU
21
English
3
English
3.1
OSD Setting Menus
Follow the instructions indicated on the down side of the OSD Function Menu. Press
/
arrow keys to scroll through the menus, VOL
PS/PTon the control panel or
+ on the control panel or the arrow key to select an item, or MENU to exit the OSD
menu.
The following menus can be set by different adjustment methods.
3.2
1
Adjusting Picture Settings
Press MENU to enter the OSD Main Menu
screen. The Picture menu is then
displayed.
2
Press
3
4
Press
5
6
Picture
Sound
TV
to enter the Picture menu.
/
Features
Parental
to select an item.
Press
/
to adjust the scales or
options settings.
OK
Enter
Smart Picture
Brightness
Contrast
Standard
50
50
Colour
Tint
Sharpness
Colour Temperature
Advanced Control
50
0
3
Cool
Select
Menu
Exit
Press MENU to return to the Picture menu entry.
Press MENU to exit the OSD menu.
- The Picture menu can be used to adjust the Smart Picture, Brightness, Contrast,
Colour, Tint, Sharpness, Colour Temperature, Advanced Control, and Advanced
Video (PC only) settings.
• The Smart Picture can be set to Standard, Vivid, Movie, Eco, or Personal.
• The Brightness, Contrast, and Colour can be adjusted by pressing
/
to
move the scales from 0 to 100.
• The Tint can be adjusted by pressing
/
to move the scales from -32 to 32.
• The Sharpness can be adjusted by pressing
/
to move the scales from 0 to 7.
• The Colour Temperature can be set to Standard, Warm, or Cool.
• The Advanced Control can be used to adjust the Noise Reduction, Flesh Tone,
Backlight, and X-Contrast.
• The Noise Reduction can be set to Auto, Off, Low, Medium, or High.
• The Flesh Tone can be set to On or Off.
• The Backlight can be adjusted by pressing
• The X-Contrast can be set to On or Off.
22
/
to adjust the scales from 0 to 100.
Phase, Clock, and Resolution settings for PC mode.
Picture
Sound
Features
Brightness
100
Contrast
50
Colour Temperature Cool
Advanced Video
Parental
OK
Enter
Select
Menu
Exit
Note: The options available on the OSD may vary depending on the input signal
source.
3.3
Adjusting Sound Settings
1
Press MENU to enter the OSD Main
Menu screen.
2
3
Press
4
Press
5
Press
/
to adjust the scales or
options settings.
6
7
Picture
to select the Sound menu.
Sound Mode
Equalizer 120Hz
Equalizer 500Hz
Sound
TV
Press
to enter the Sound menu.
/
Features
Parental
to select an item.
OK
Enter
Personal
0
0
Equalizer 1.5KHz
Equalizer 5KHz
Equalizer 10KHz
0
0
0
Balance
Virtual Surround
Digital Audio Out
0
Off
PCM
Select
Menu
Exit
Press MENU to return to the Sound menu entry.
Press MENU to exit the OSD menu.
- The Sound menu can be used to adjust the Sound Mode, Equalizer 120Hz, Equalizer
500Hz, Equalizer 1.5KHz, Equalizer 5KHz, Equalizer 10KHz, Balance, Virtual
Surround, Digital Audio Out, SPDIF Delay, AVL, Type, and Audio Description
settings.
• The Sound Mode can be set to Music, Speech, or Personal.
• The Equalizer 120Hz, Equalizer 500Hz, Equalizer 1.5KHz, Equalizer 5KHz, and
Equalizer 10KHz can be adjusted by pressing
• The Balance can be adjusted by pressing
/
/
to move the scales from -6 to 6.
to move the scales from -50 to 50.
• The Virtual Surround can be set to On or Off.
• The Digital Audio Out can be set to Dolby Digital, PCM, or Off.
23
English
• The Advanced Video can be used to adjust the Auto Config, Horizontal, Vertical,
English
• The SPDIF Delay can be adjusted by pressing
/
to move the scales from
0 to 250.
• The AVL can be set to On or Off.
• The Type can be set to Normal, Hard of Hearing, or Audio Description.
• To adjust the Audio Description, select Audio Description in the Type setting
first. Press
/
to adjust the scales from 0 to 100.
Note: The options available on the OSD may vary depending on the input signal
source.
3.4
Adjusting TV Settings
1
Press INPUT and select TV as the signal
type.
2
Press MENU to enter the OSD Main Menu
screen.
3
4
5
Press
6
Press
/
to adjust the scales or
options settings.
7
8
Press MENU to return to the TV menu entry.
Press
Press
to select the TV menu.
Picture
Sound
TV
Country
Audio Carrier
Channels
UK
Stereo
Features
Parental
to enter the TV menu.
/
to select an item.
OK
Enter
Select
Menu
Exit
Press MENU to exit the OSD menu.
- The TV menu can be used to adjust the Country, Audio Carrier, and Channels
settings.
• The Country can be set to Austria, Belgium, Bulgaria, Croatia, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania,
Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, and
UK.
• The Audio Carrier can be set to Dual I, Dual II, Mono, and Stereo.
• The Channels can be used to perform or adjust the Channel Scan, Update Scan,
Single RF Scan, Analog Manual Scan, Channel Skip, Channel Sort, Channel
Edit, Decoder, and Analog Ch Fine Tune settings.
24
English
• Select Channel Scan to activate the automatic TV channel search.
Picture
Sound
TV
Features
Parental
OK
Picture
Channel Scan
Update Scan
Single RF Scan
Sound
Enter
Select
Status:Scanning...
Analog Channels: 0
Digital Channels: 0
TV
Analog Manual Scan
Channel Skip
Channel Sort
Channel Edit
Decoder
Analog Ch Fine Tune
Features
0%
Parental
Menu
Back
Menu
Cancel
• Select Update Scan to automatically add channels to the existing channel list.
• Select Single RF Scan to search for digital channels within the selected RF
(Radio Frequency) channel.
Picture
Sound
Scan Single RF channel. (Digital Only)
TV
Features
Parental
OK
Scan
0%
RF Channel
Signal Strength
Signal Quality
Menu
21
0
Poor
Back
• Select Analog Manual Scan to search for analog channels within the specified
frequency range.
Picture
Sound
Search for analog channels
TV
Features
Parental
619.285
Start Frequency (MHz)
Scan Up
Scan Down
Menu
Back
• Use Channel Skip to prevent the desired channels from being accessed by
pressing PS/PT on the remote control or control panel.
Picture
Sound
TV
Features
Parental
OK
Enter
55
56
57
58
59
60
61
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Select
----------------------
Menu
Back
25
English
• Select the Channel Sort to change the order of the channel list.
• The Channel Edit allows you to adjust the detailed items, including Channel
Number, Channel Name, Frequency, Colour System, and Sound System for
each channel.
Picture
Sound
TV
Features
Parental
OK
Enter
55
56
57
Analog
Analog
Analog
----------
58
59
60
61
Analog
Analog
Analog
Analog
-------------
Select
Menu
Picture
Transmitter
Channel Number:
Channel Name:
Sound
TV
Frequency:
Colour System
Sound System
Features
Parental
Back
OK
Enter
55
----619.285
Auto
B/G
Select
Menu
Back
- To change the channel number, select Channel Number and use the number keys
on the remote control to type numbers.
- To change the channel name, select Channel Name and use the number keys on
the remote control to type letters, digits, or symbols. Press keys repeatedly to toggle
different characters.
KEY
0
CHARACTER
-
@
_
-
1
2
A
B
C
a
b
c
3
D
E
F
d
e
f
3
4
G
H
I
g
h
i
4
1
0
2
5
J
K
L
j
k
l
5
6
M
N
O
m
n
o
6
7
P
Q
R
S
p
q
r
8
T
U
V
t
u
v
8
9
W
X
Y
Z
w
x
y
s
7
z
9
- To change the channel frequency, select Frequency and use the number keys on
the remote control to type the desired frequency.
- The Colour System can be set to Auto, DAL, or SECAM.
- The Sound System can be set to I, D/K, A2 D/K, A2 D/K1, B/G, A2 B/G, L, or L’.
• The Decoder supports the Canal+ (paid TV channel with encrypted programs).
• Select Analog Ch Fine Tune to adjust precisely the analog channel frequency to
ensure high signal quality.
Note: The TV Settings are only available in TV mode.
26
1
2
3
English
3.5
Adjusting Features Settings
Press MENU to enter the OSD Main Menu
screen.
Press
Press
to select the Features menu.
to enter the Features menu.
Picture
Sound
TV
Features
Parental
4
5
6
7
Press
Press
/
settings.
/
to select an item.
to change the options
OK
Menu Language
Picture Format
Time
UK
Stereo
Subitile
Teletext Language
Common Interface
Reset Default
Enter
Select
Menu
Exit
Press MENU to return to the Features menu entry.
Press MENU to exit the OSD menu.
- The Features menu can be used to adjust the Menu Language, Picture Format,
Time, Subtitle, Teletext Language, Common Interface, Reset Default, and HDMI
Scan Info (HDMI only) settings.
• The available menu languages are English, Deutsch, Français, Italiano,
Español, Português, Nederlands, българскй, Dansk, Suomi, Svenska,
Norsk, Polski, Русский, Ceský, Hrvatski, Magyar, Română, Slovenský,
Slovenščina, Srpski, Türkçe, and Ελληνικά, and Українська.
• The Time can be used to adjust theTime Zone, Time, and Sleep Timer settings.
• The Subtitle can be used to adjust the Analog Subtitle, 1st Subtitle, 2nd
Subtitle, and Subtitle Type settings.
• The Teletext Language can be used to adjust the Digital Teletext Lang. and
Decode Page Lang. settings.
• Select Common Interface to view the CI supplier information.
• Select Reset Default to restore all settings to the defaults.
• The HDMI Scan Info can be used to adjust the Automatic, Underscan, and
Overscan settings.
27
English
• The Picture Format selections include Auto, Normal, Zoom1, Zoom2, Full,
Subtitle, Native, and Wide. Please see below for details.
Auto
Normal
Zoom1
Zoom2
Full
Subtitle
Native
Wide
Note: The options available on the OSD may vary depending on the input signal
source.
28
1
2
English
3.6
Adjusting Parental Settings
Press INPUT and select TV as the signal
type.
Picture
Press MENU to enter the OSD Main Menu
screen.
Sound
3
4
5
6
Press
Parental
7
Press
8
9
Press MENU to return to the Parental menu entry.
Press
to select the Parental menu.
Channel Block
Parental Guidance
Input Block
TV
Set Password
Clear All
Features
to enter the Parental menu.
Type the password. The default is 0000.
Press
/
/
OK
Enter
Select
Menu
Back
to select an item.
to adjust the options settings.
Press MENU to exit the OSD menu.
- The Parental menu can be used to adjust the Channel Block, Parental Guidance,
Input Block, Set Password, and Clear All settings.
• Select Channel Block to block desired channels.
• Select Parental Guidance to set Age Rating. Press
/
to adjust the value from
4 to 18 or to set as None.
• Select Input Block to block desired input sources.
• Select Set Password to change the password.
Picture
Sound
New
Confirm
TV
Features
Parental
Menu
Back
• Select Clear All to restore defaults for all parental settings.
Note: The Channel Block is only accessible in TV mode.
29
4
English
Troubleshooting
Situation
Solution
•
•
Connect the power cord properly.
Check if the power LED is on or not.
No picture and sound.
•
•
•
•
Press
on the control panel or remote control.
Press Input to cycle through connected video sources.
Press PS or PT to switch to other TV programs.
Make sure all cables are connected properly.
No picture, or poor picture,
sound is OK.
•
•
Check the antenna and cable connections.
Adjust the brightness in the Picture OSD menu.
Picture is not in color.
•
Adjust the colour option in the Picture OSD menu.
Picture is OK, no sound.
•
•
•
•
Make sure the source device is functioning properly.
Make sure the audio cable is connected securely.
Turn the mute off.
Press VOL + on the control panel or remote control.
One of the speakers has no
sound.
•
Adjust the balance in the Sound OSD menu.
Cannot receive some TV
channels using cable TV.
•
Try the Auto Search function in the Channel or DTV
OSD menu.
Want to reset TV settings.
•
Use the Reset function in the Setup OSD menu.
•
If OSD items are colored in gray, the system is in a state
such that those settings are not available.
Cannot operate menus.
Screen image turns over.
•
Make sure the video signal cable is connected properly.
•
Adjust the location of the antenna, placing it far from
roads or sources of interference.
Check the antenna and the video signal line connections.
Snow appears on the screen.
•
Blurred or overlapped
images.
•
•
•
Adjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or replace the video
signal cable.
Remote control doesn’t work.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote control and the
sensor is clear.
Try operating the remote control at a closer distance to
the TV.
•
30
Support Timing
PC Mode Support Timing
SJ19DMAB
SJ22DMAB
SJ25DMAB
SJ28DMBB
SJ32DMBB
SJ42DMBB
Mode
Resolution
Horizontal Freq.
(KHz)
Vertical Freq.
(Hz)
Pixel Clock
(MHz)
1
640 x 480
2
640 x 480
31.469
59.94
25.175
V
V
37.861
72.809
31.5
V
V
3
640 x 480
37.5
75
31.5
V
V
4
720 x 400
31.469
70.087
28.322
V
V
5
800 x 600
35.156
56.25
36
V
V
6
800 x 600
37.879
60.317
40
V
V
7
800 x 600
48.077
72.188
50
V
V
8
800 x 600
46.875
75
49.5
V
V
9
1024 x 768
48.363
60.004
65
V
V
10
1024 x 768
56.476
70.069
75
V
V
11
1024 x 768
60.023
75.029
78.75
V
V
12
1280 x 720
44.772
59.855
74.25
V
V
V
13
1280 x 768
47.776
59.87
79.5
V
14
1360 x 768
47.712
60.015
85.5
V
15
1280 x1024
63.981
60.02
108
V
16
1440 x 900
55.935
59.887
106.5
V
17
1680 x 1050
65.29
59.954
146.25
V
18
1920 x 1080
66.587
59.934
138.5
V
19
1920 x 1200
66.587
59.934
138.5
V
(SJ28DMBB)
V
Video Mode Support Timing
Resolution (active dot)
HDMI/YPbPr
480i
V
576i
V
480p
V
576p
V
720p
V
1080i
V
1080p
(SJ25DMAB, SJ28DMBB, SJ32DBB, SJ42DMBB only)
V
31
English
5
6
English
Specifications
Model No.
SJ19DMAB
SJ22DMAB
SJ25DMAB
SJ28DMBB
SJ32DMBB
SJ42DMBB
Aspect Ratio
16:9
16:9
16:9
Resolution
1366 x 768
1366 x 768
1920 x 1080 1920 x 1200 1920 x 1080 1920 x 1080
16:10
16:9
16:9
OSD Language
Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, Ukrainian,
German, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Romanian,
Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Turkish
DISPLAY
ENHANCEMENT
Sound Output
(RMS Watts)
3W
Sound Mode
Personal, Music, Speech
Picture Format
Auto, Normal, Zoom1, Zoom2, Full, Subtitle,
Wide (70cm/27.5” only), Native (HDMI only)
Picture Mode
Standard, Vivid, Movie, Eco, Personal
3W
5W
10 W
10 W
10 W
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
SCART 1
SCART 2
SPDIF
HDMI 1
HDMI 2
Earphone
HDMI 3
Earphone
HDMI 3
Earphone
HDMI 3
CONNECTION
Tuner Input (75 Ω)
PC IN: D-SUB and PC Audio
Component Video and L/R Audio Input
Rear Connector
Side Connector
SCART 1
SPDIF Output
SCART 1
SPDIF Output
(Digital audio out)
(Digital audio out)
HDMI 1
HDMI 1
SCART 1
SPDIF
HDMI 1
Common Interface
AV In (Composite Audio/Video)
Earphone
HDMI 2
Earphone
HDMI 2
Earphone
HDMI 2
WEIGHT & DIMENSION
Product
Dimension
(W x H x D mm)
457.3 x 346 x 170.4
527.9 x 389 x 170.4
594.5 x 430.7 x 184.5 665.2 x 529.4 x 225.5 790.5 x 569.6 x 255.3 1015.4 x 711.2 x 279.5
Net Weight
4.4 kg
4.9 kg
6.9 kg
Operation (Max.)
50 W
60 W
9.1 kg
11 kg
20.9 kg
130 W
130 W
200 W
AC100~240V
50~60 Hz
AC100~240V
50~60 Hz
POWER
Standby
Main Power
Ambient
Temperature
32
60 W
<1W
AC100~240V
50~60 Hz
AC100~240V
50~60 Hz
AC100~240V
50~60 Hz
AC100~240V
50~60 Hz
5 ºC~ 35 ºC
1
2
3
4
Dissembling the stand base
Disconnect all the cables and cords from the TV to prevent breakage.
Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
Remove the screws so that the stand base can be removed.
Gently remove the stand base.
18.5”/21.6”/24.6”
27.5”/31.5”/42”
(For reference only)
Wall mounting the TV:
Model Name
SJ19DMAB
SJ22DMAB
SJ25DMAB
SJ28DMBB
SJ32DMBB
SJ42DMBB
1
2
3
4
VESA-compatible
wall bracket (WxH)
100x100 mm
100x100 mm
200x100 mm
200x100 mm
200x200 mm
400x200 mm
Mount holes
number
4
4
4
4
4
4
Screw type
Metric 4 x 10 mm
Metric 4 x 10 mm
Metric 4 x 10 mm
Metric 6 x 10 mm
Metric 6 x 10 mm
Metric 6 x 10 mm
Maximum loading
15 kg
18 kg
24 kg
30 kg
36 kg
72 kg
Purchase a VESA compatible wall bracket
(please refer to the table above).
Locate your ideal TV position on the wall.
Fix the wall bracket firmly on the wall.
Secure the TV to the bracket using the 4
mount holes on the back and center of the TV.
Note:
•
•
Please read the instructions of your specific wall bracket to properly wall mount
the TV.
The TV stand base can be screwed on a table or a hard surface using the hole
on the back of the stand base.
*Installing the LCD TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. Hannspree bears no responsibility for improper
mounting or mounting that results in accident or injury. You can ask a qualified service personnel about
using an optional bracket to mount the TV to the wall.
33
English
7
8
English
Using the Cable Organizer
Route the cables through the cable clamp as shown:
34
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement