Auto Accompaniment - Support

Auto Accompaniment - Support
Auto Accompaniment
RHYTHM
TEMPO
KEY LIGHT
TOUCH
ACCOMP
RESPONSE VOLUME
GM
MEMORY
STEP
TOUCH
RESPONSE
TRANSPOSE/
TUNE/MIDI MEMORY
STEP
KEY LIGHT
METRONOME BEAT
SPLIT
LAYER
TEMPO
MODE
VOLUME
INTRO
(TIE)
7
SYNCHRO/
ENDING
8
4
MAX
POWER
FULL RANGE
CHORD
FINGERED
START/
STOP
CASIO CHORD
NORMAL
S TO P
PLAY/PAUSE
REW
FF
CK2
IGHT/TRA
LEFT/TRACK1 R
9
5
6
DEMO
3-STEP LESSON
1
2
3
REST
MIN
NORMAL/
FILL-IN
VARIATION/
FILL-IN
MODE
STEP 1
SONG BANK CONTROLLER
STEP 2
STEP 3
[+]/[–]
Number buttons
START/STOP
This keyboard automatically plays bass and chord parts in accordance
with the chords you finger. The bass and chord parts are played using sounds and tones that are automatically selected to select the
rhythm you are using. All of this means that you get full, realistic
accompaniments for the melody notes you play with your right hand,
creating the mood of an one-person ensemble.
Selecting a Rhythm
This keyboard provides you with 100 exciting rhythms that you can
select using the following procedure.
0
Adjusting the Tempo
The tempo (beats per minute) can be set to a value in the range of 40
to 255. The tempo value you set is use for Song Bank, 3-step lesson,
and Auto Accompaniment chord play, as well as playback from memory and metronome operation.
To set the tempo
1.
Use the TEMPO buttons to set the tempo.
▲ : Increase the tempo value.
▼ : Decreases the tempo value.
To select a rhythm
1.
2.
Find the rhythm you want to use in the “Rhythm List”
(page A-4) and note its rhythm number.
Press the RHYTHM button.
Beat
number
Metronome
Tempo
value
Pop sB1 s s
❚ NOTES ❚
Indicator appears
3.
Flash
Use the number buttons to input the two digit rhythm
number for the rhythm you want to select.
Example: To select “76 RHUMBA”, input 7 and then 6.
R h umb a e 1
❚ NOTE ❚
You can also increment the displayed rhythm number by pressing [+] and
decrement it by pressing [–].
Playing a Rhythm
• While the tempo value is flashing, you can also use the number buttons
or [+] and [–] to input a three-digit value. Note that you must input leading zeros, so 90 is input as 090.
• Pressing both the ▲ and ▼ TEMPO buttons at the same time automatically returns the currently selected rhythm to its default tempo.
Using Auto Accompaniment
The following procedure describes how to use the keyboard’s Auto
Accompaniment feature. Before starting, you should first select the
rhythm you want to use and set the tempo of the rhythm to the value
you want.
To use Auto Accompaniment
1.
Use the following procedure to start and stop rhythm play.
To play a rhythm
1.
2.
3.
Set the MODE switch to NORMAL.
Press the START/STOP button to start play of the currently selected rhythm.
To stop rhythm play, press the START/STOP button
again.
❚ NOTE ❚
2.
3.
Set the MODE switch to CASIO CHORD, FINGERED,
or FULL RANGE CHORD.
Press the START/STOP button to start play of the currently selected rhythm.
Play a chord.
• The actual procedure you should use to play a chord depends
on the current MODE switch position. Refer to the following
pages for details on chord play.
CASIO CHORD .......................................... Page E-17
FINGERED .................................................. Page E-17
FULL RANGE CHORD ............................ Page E-18
All of the keyboard keys are melody keys while the MODE switch is set to
NORMAL.
E-16
474A-E-018B
Chord Types
Rh u m b a e h
Example
C minor seventh (Cm7)
Minor seventh chords (m7)
To play a minor seventh chord, keep
the major chord key depressed and
press any other three accompaniment keyboard keys located to the
right of the major chord key.
Chord name
4.
Basic Chord Form
(The chord form that appears here may
show notes that differ from those actually pressed on the keyboard. With some
chords, inverted chord forms may be displayed.)
To stop Auto Accompaniment play, press the START/
STOP button again.
CASIO CHORD
This method of chord play makes it possible for anyone to easily play
chords, regardless of previous musical knowledge and experience.
The following describes the CASIO CHORD “Accompaniment keyboard” and “Melody keyboard”, and tells you how to play CASIO
CHORDs.
CDE F GAB C DE F
❚ NOTE ❚
It makes no difference whether you press black or white keys to the right
of a major chord key when playing minor and seventh chords.
FINGERED
FINGERED provides you with a total of 15 different chord types. The
following describes the FINGERED “Accompaniment keyboard” and
“Melody keyboard”, and tells you how to play a C-root chord using
FINGERED.
FINGERED Accompaniment Keyboard and Melody Keyboard
Accompaniment
keyboard
Melody keyboard
CASIO CHORD Accompaniment Keyboard and Melody
Keyboard
Accompaniment
keyboard
Melody keyboard
❚ NOTE ❚
The accompaniment keyboard can be used for playing chords only. No
sound will be produced if you try playing single melody notes on the accompaniment keyboard.
❚ NOTE ❚
The accompaniment keyboard can be used for playing chords only. No
sound will be produced if you try playing single melody notes on the accompaniment keyboard.
C
Cm
Cdim
Caug *1
Csus4
C7 *2
Chord Types
CASIO CHORD accompaniment lets you play four types of chords
with minimal fingering.
Chord Types
Example
(
Major chords
Major chord names are marked
above the keys of the accompaniment keyboard. Note that the chord
produced when you press an accompaniment keyboard does not change
octave, regardless of which key you
use to play it.
C Major (C)
Minor chords (m)
To play a minor chord, keep the major chord key depressed and press
any other accompaniment keyboard
key located to the right of the major
chord key.
C minor (Cm)
Seventh chords (7)
To play a seventh chord, keep the
major chord key depressed and
press any other two accompaniment
keyboard keys located to the right
of the major chord key.
C seventh (C7)
CDE F GAB C DE F
Cmaj7 *2
Cm7 *2
(
)
C7-5 *1
(
)
Cm7-5
)
Cadd9 *2
C7sus4
CD E F G A B C D E F
(
Cmadd9 *2
CDE F GAB C DE F
(
)
Cdim7 *1
CmM7 *2
(
)
)
See the FINGERED Chord Chart on page A-3 for details on playing
chords with other roots.
*1: Inverted fingerings cannot be used. The lowest note is the root.
*2: The same chord can be played without pressing the 5th G.
474A-E-019A
E-17
SYNCHRO/ENDING
INTRO
ACCOMP VOLUME
KEY LIGHT
TOUCH
ACCOMP
RESPONSE VOLUME
TRANSPOSE/
TUNE/MIDI MEMORY
GM
MEMORY
STEP
TOUCH
RESPONSE
STEP
KEY LIGHT
METRONOME BEAT
SPLIT
LAYER
TEMPO
MODE
VOLUME
INTRO
(TIE)
7
SYNCHRO/
ENDING
8
4
MAX
POWER
FULL RANGE
CHORD
FINGERED
START/
STOP
CASIO CHORD
NORMAL
S TO P
PLAY/PAUSE
REW
FF
CK2
IGHT/TRA
LEFT/TRACK1 R
9
5
6
DEMO
3-STEP LESSON
1
2
3
REST
MIN
NORMAL/
FILL-IN
VARIATION/
FILL-IN
STEP 1
SONG BANK CONTROLLER
STEP 2
0
STEP 3
[+]/[–]
Number buttons
START/STOP
VARIATION/FILL-IN
MODE
NORMAL/FILL-IN
❚ NOTES ❚
Example: To play the chord C major.
• Except for the chords specified in note*1 above, inverted fingerings (i.e.
playing E-G-C or G-C-E instead of C-E-G) will produce the same chords
as the standard fingering.
• Except for the exception specified in note*2 above, all of the keys that
make up a chord must be pressed. Failure to press even a single key
will not play the desired FINGERED chord.
• When the key light system is turned on, the keys of the accompaniment
keyboard light to show the chord you played. Though the chord is the
same, the form of the chord (the keys that light) may differ from the one
you used (the keys you pressed). If you play C Major using the inverted
chord form E-G-C, for example, the keys for C-E-G will light.
Any of the fingerings shown in the illustration below will produce C
major.
1
E
E
FULL RANGE CHORD
FULL RANGE CHORD Accompaniment Keyboard and
Melody Keyboard
Accompaniment keyboard/Melody keyboard
Number of Types
C6 • Cm6 • C69
C#
D
E
F
G
A♭ B♭
•
•
•
•
•
•
C
C
C
C
C
C
C
B C# m Dm Fm Gm Am B♭ m
•
•
•
•
•
•
C
C
C
C
C
C
C
♭
1 ........ Chord C
2 ........ Chord CC
E
❚ NOTES ❚
• As with the FINGERED mode (page E-17), you can play the notes that
form a chord in any combination (1).
• When the composite notes of a chord are separated by 6 or more notes,
the lowest sound becomes the bass (2).
< Music Example >
Tone: 016, Rhythm: 05, Tempo: 070
D
Bm
E7
A
Bm
G
A
C
A
A
G
4 D
4 4
4
#
The following procedure describes how to use the Intro feature. Before starting, you should first select the rhythm you want to use, and
set the tempo.
15 (page E-17)
-5
C
This keyboard lets you insert a short intro into a rhythm pattern to
make startup smoother and more natural.
23
The following are examples of chords that
use C as the bass note.
Other Chords
G
Using an Intro Pattern
< Chords Recognized by This Keyboard >
Corresponding
FINGERED Chord
C
2
This accompaniment method provides a total of 38 different chord
types: the 15 chord types available with FINGERED plus 23 additional types. The keyboard interprets any input of three or more keys
that matches a FULL RANGE CHORD pattern to be a chord. Any
other input (that is not a FULL RANGE CHORD pattern) is interpreted as melody play. Because of this, there is no need for a separate
accompaniment keyboard, so the entire keyboard, from end to end,
can be used for both melody and chords.
Chord Types
G
♭add9
Dm7 A 7 F7 Fm7 Gm7 A
•
•
•
•
•
C
C
C
C
C
C
To insert an intro
1.
Press the INTRO button to start the selected rhythm
with an intro pattern.
• With the above setup, the intro pattern is played and the auto
accompaniment with intro pattern starts as soon as you play
chords on the accompaniment keyboard.
❚ NOTES ❚
• The standard rhythm pattern starts to play after the intro pattern is complete.
• Pressing the VARIATION/FILL-IN button while an intro pattern is playing
causes the variation pattern to sound after the intro pattern is complete.
• Pressing the SYNCHRO/ENDING button while an intro pattern is playing
causes the ending pattern to sound after the intro pattern is complete.
Using a Fill-in Pattern
Fill-in patterns let you momentarily change the rhythm pattern to
add some interesting variation to your performances.
The following procedure describes how to use the Fill-in feature.
E-18
474A-E-020A
To insert a fill-in
1.
2.
Press the START/STOP button to start rhythm play.
Press the NORMAL/FILL-IN button to insert a fill-in
pattern for the rhythm you are using.
❚ NOTE ❚
The fill-in pattern does not play if you press the NORMAL/FILL-IN button
while an intro pattern is playing.
Using a Rhythm Variation
In addition to the standard rhythm pattern, you can also switch to a
secondary “variation” rhythm pattern for a bit of variety.
To insert the variation rhythm pattern
1.
2.
Press the START/STOP button to start rhythm play.
Press the VARIATION/FILL-IN button to switch to the
variation pattern for the rhythm you are using.
❚ NOTES ❚
• If the MODE switch is set to NORMAL, only the rhythm plays (without a
chord) when you play on the accompaniment keyboard.
• If you press the INTRO button before playing anything on the keyboard,
the rhythm starts automatically with an intro pattern when you play something on the accompaniment keyboard.
• Pressing the VARIATION/FILL-IN button before playing anything on the
keyboard causes play to start with the variation pattern when something
is played on the keyboard.
• To cancel synchro start standby, press the SYNCHRO/ENDING button
one more time.
Finishing with an Ending Pattern
You can end your performances with an ending pattern that brings
the rhythm pattern you are using to a natural-sounding conclusion.
The following procedure describes how to insert an ending pattern.
Note that the actual ending pattern played depends on the rhythm
pattern you are using.
To finish with an ending pattern
1.
• This causes the ending pattern to play which brings rhythm
accompaniment to an end.
• The timing when the ending pattern starts depends on when
you press the SYNCHRO/ENDING button. If you press the
button before the second beat of the current measure, the
ending pattern starts playing immediately. Pressing the button at any point in the measure after the second beat results
in the ending pattern playing from the beginning of the following measure.
❚ NOTE ❚
To switch back to the standard rhythm pattern, press the NORMAL/FILLIN button.
Using a Fill-in Pattern with a Variation
Rhythm
You can also insert a fill-in pattern while a variation rhythm pattern
is playing.
To insert a fill-in into a rhythm variation
1.
While a variation rhythm pattern is playing, press the
VARIATION/FILL-IN button to insert a fill-in pattern
for the variation rhythm you are using.
While the rhythm is playing, press the SYNCHRO/
ENDING button.
Adjusting the Accompaniment Volume
You can adjust the volume of the accompaniment parts as a value in
the range of 000 (minimum) to 127.
1.
Press the ACCOMP VOLUME button.
Current accompaniment volume setting
A c omp V o l
Synchro Starting Accompaniment with
Rhythm Play
You can set up the keyboard to start rhythm play at the same time
you play the accompaniment on the keyboard.
The following procedure describes how to use synchro start. Before
starting, you should first select the rhythm you want to use, set the
tempo, and use the MODE switch to select the chord play method
you want to use (NORMAL, CASIO CHORD, FINGERED, FULL
RANGE CHORD).
2.
Use the number buttons or the [+]/[–] buttons to
change the current volume setting value.
Example: 110
A c omp V o l
To use synchro start
1.
Press the SYNCHRO/ENDING button to put the keyboard into synchro start standby.
❚ NOTES ❚
• The current accompaniment volume value that appears in Step 1 automatically clears from the display if you do not input anything within about
five seconds.
• Pressing [+] and [–] buttons at the same time automatically sets an accompaniment volume of 075.
Flash
2.
Play a chord and the rhythm pattern starts to play automatically.
474A-E-021A
E-19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement