EI600 Series
Digital In-Wall Timers
The EI600 Series Electronic Decorator Astronomic Time Switches are easy-to-program timers that provide up to 40 events per week.
Features
• Easy to program for 24-Hour or 7-Day load control
• Auto Daylight Saving Time adjustment (factory enabled)
• CFL/LED compatible
• Astronomic feature provides sunset ON and sunrise OFF settings or combine Astronomic features with specific timed ON/OFF programming
• Low battery indicator
• Continuously displays time of day, mode and load status
• CR2 lithium battery provides a minimum of 2 years of time keeping without AC power
• Replaces single-pole or 3-way switches in a variety of applications
• Random setting feature available to avoid predictable time controlled look
• User program selections are stored in non-volatile memory
• Controls all voltage/frequencies with no adjustments required
• No neutral required
• Manual override feature
Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly.
Project:
Location:
Product Type:
Contact/Phone:
Model #:
Ratings
Switch Type: Single-pole or 3-way (multi-way) compatible (up to 100 ft.)
Switch Ratings:
Resistive (heater):
Style:
Tungsten (incandescent):
Ballast (magnetic):
Motor:
DC Loads:
20 Amp, 120-277 VAC
15 Amp, 120 VAC; 6 Amp, 208-277 VAC
16 Amp, 120-277 VAC
1HP, 120 VAC; 2 HP, 240 VAC
4 Amp, 12 VDC;
2 Amp, 28 VDC
For use with decorator type switch plates
Warranty: Limited 5 year
Dimensions: 2.75" H x 1.75" W x 1.36" D
Multi-gang Derating: Able to install in multigang installations without derating
EI600
EI600 Series
In-Wall Timers
TITLE
20
LISTED
Energy Controls
EI600 Series
Model Number
EI600C
EI600WC
EI600LAC
Switch
Single-Pole/3-Way
Single-Pole/3-Way
Single-Pole/3-Way
Clock Voltage
120-277 VAC; 12-28 VDC
120-277 VAC; 12-28 VDC
120-277 VAC; 12-28 VDC
Max Wattage
AC/DC
1800/4155
1800/4155
1800/4155
Neutral
Required
No
No
No
Color
Ivory
White
Light Almond
Specification
The time switch shall be a solid state electronic control, capable of permitting 40 fixed time events to be distributed through a 7-day time period plus 1 Astro ON and 1 Astro OFF setpoint per day. The time-of-day events shall be programmable to the nearest minute with a minimum ON duration of 1 minute and a maximum ON duration of 6 days,
23 hours, 59 minutes. The timer shall have a digital LCD readout to show day-of-week and time-of-day using 12 hour
AM/PM indicator. The time switch shall provide a manual override control for both temporary and permanent overrides. The time switch shall operate over a temperature range of 32°F (0°C) to 104°F (40°C). A lithium battery provides a minimum of 2 years of time keeping without AC power. User program selections are stored in the timer's non-volatile memory. Switch configuration to be SPST with a CSA listed rating of: Resistive (heater): 20 Amp, 120-277
VAC; Tungsten (incandescent):15 Amp, 120 VAC; 6 Amp, 208-277 VAC; Ballast (fluorescent): 16 Amp, 120-277 VAC;
Motor: 1 HP, 120 VAC; 2 HP, 240 VAC; 4 Amp,12 VDC; 2 Amp, 28 VDC. The timer must fit a standard wall box and accept a rectangular decorator wall plate. The timer contacts shall make or break current according to user adjustable program. The timer shall be Intermatic model ______ (Ivory-EI600C)(White-EI600WC)(Light Almond-EI600LAC).
Diagrams
EI600
DIAGRAM 1:
TYPICAL EXISTING
2-SWITCH SETUP
LINE
3-WAY
MAIN SWITCH
“COMMON” TERMINAL
WIRE “A”
WIRE “B”
WIRE “C”
3-WAY
REMOTE SWITCH
LOAD
NEUTRAL
EI600
DIAGRAM 2:
2-SWITCH SETUP,
TIMER INSTALL
RE-USING EXISTING
REMOTE 3-WAY SWITCH
LINE BLACK
LOAD
TIMER
BLUE
RED
NOT USED
WIRE “B” WIRE “C”
JUMPER
WIRE “A”
3-WAY
REMOTE SWITCH
“COMMON” TERMINAL
NEUTRAL
EI600
DIAGRAM 3:
2-SWITCH SETUP,
TIMER INSTALL USING
NEW SINGLE-POLE
REMOTE SWITCH
LINE BLACK BLUE
TIMER
RED
WIRE “B” WIRE “C”
WIRE “A”
SINGLE-POLE
REMOTE SWITCH
JUMPER
LOAD
NEUTRAL
Energy Controls
www.intermatic.com