ProForm PETL99713, C200 User manual

ProForm PETL99713, C200 User manual
Model No. PETL99713.0
Serial No.
Write the serial number in the space
above for reference.
User’s Manual
Serial
Number
Decal
CUSTOMER SERVICE
UNITED KINGDOM
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
CASTLEFORD
WF10 5QJ
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: [email protected]
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
www.iconeurope.com
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
THE CHEST HEART RATE MONITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
OPERATION AND ADJUSTMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
RECYCLING INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the
warning decals. If a decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a
free replacement decal. Apply the decal in
the location shown. Note: The decals may
not be shown at actual size.
305284
PROFORM is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read
all important precautions and instructions in this manual and all warnings on your treadmill before
using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
12.When connecting the power cord (see page
16), plug the power cord into an earthed
circuit. No other appliance should be on the
same circuit. When replacing the fuse in the
power cord adapter, insert an ASTA-approved
BS1362, 13-amp fuse into the fuse carrier.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
13.If an extension cord is needed, use only a
3-conductor, 14-gauge (1 mm2) cord that is
no longer than 5 ft. (1.5 m).
3. Use the treadmill only as described in this
manual.
14.Keep the power cord away from heated
surfaces.
4. The treadmill is intended for home use only.
Do not use the treadmill in any commercial,
rental, or institutional setting.
15.Never move the walking belt while the power
is turned off. Do not operate the treadmill
if the power cord or plug is damaged, or if
the treadmill is not working properly. (See
TROUBLESHOOTING on page 25 if the treadmill is not working properly.)
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
6. Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
16.Read, understand, and test the emergency
stop procedure before using the treadmill
(see HOW TO TURN ON THE POWER on
page 18).
17.Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
7. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
18.The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
8. Keep children under age 12 and pets away
from the treadmill at all times.
9. The treadmill should be used only by persons weighing 330 lbs. (150 kg) or less.
19.The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
10.Never allow more than one person on the
treadmill at a time.
11.Wear appropriate exercise clothes while
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
20.Never leave the treadmill unattended while
it is running. Always remove the key, press
the power switch into the off position (see
the drawing on page 5 for the location of the
power switch), and unplug the power cord
when the treadmill is not in use.
3
21.Do not attempt to move the treadmill until
it is properly assembled. (See ASSEMBLY
on page 7 and HOW TO FOLD AND MOVE
THE TREADMILL on page 24.) You must be
able to safely lift 45 lbs. (20 kg) to move the
treadmill.
26.
22.When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
23.Do not change the incline of the treadmill by
placing objects under the treadmill.
DANGER:
Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized
service representative only.
27.Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
24.Never insert any object into any opening on
the treadmill.
25.Inspect and properly tighten all parts of the
treadmill regularly.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary
PROFORM® PERFORMANCE 1050 treadmill. The
PERFORMANCE 1050 treadmill offers an impressive selection of features designed to make your
workouts at home more enjoyable and effective. And
when you’re not exercising, the unique treadmill can
be folded up, requiring less than half the floor space of
other treadmills.
reading this manual, please see the front cover of this
manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after
Length: 6 ft. 1 in. (185 cm)
Width: 3 ft. (91 cm)
Weight: 182 lbs. (83 kg)
Console
Tray
Heart Rate Monitor
Handrail
Key/Clip
Upright
Walking Belt
Power Switch
Foot Rail
Platform Cushion
Idler Roller
Adjustment Screws
5
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached. Extra parts may be included.
5/16" Star
Washer (8)–4
1/4" Star
Washer (11)–8
#8 x 1/2" Screw
(10)–8
3/8" Star
Washer (5)–6
#8 x 3/4" Screw
(6)–8
M8 Nut (61)–2
#10 x 3/4" Screw
(13)–4
3/8" Nut (3)–2
M8 x 45mm
Bolt (12)–1
M8 x 50mm
Bolt (105)–1
1/4" x 1 3/4"
Screw (95)–2
5/16" x 2 1/4"
Screw (7)–4
3/8" x 2 1/2" Bolt (2)– 2
3/8" x 4" Screw (4)–6
3/8" x 2" Bolt (12)–2
6
ASSEMBLY
• Assembly requires two persons.
• To identify small parts, see page 6.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• Assembly requires the following tools:
the included hex key
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
one adjustable wrench
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
scissors
one Phillips screwdriver
needlenose pliers
To avoid damaging parts, do not use power tools.
1.
Go to www.iconsupport.eu on your computer
and register your product.
• activates your warranty
• allows us to notify you of upgrades and offers
1
• saves you time if you ever need to contact
Customer Service
Note: If you do not have Internet access, call
Customer Service (see the front cover of this
manual) to register your product.
2.
Make sure that the power cord is unplugged.
2
Locate the Upright Wire (70) bundled around the
front of the Base (80). Cut the plastic tie securing
the Upright Wire. Then, route the Upright Wire
into the Base and out of the indicated hole.
Press a Base Cap (77) into each side of the
Base (80).
See the inset drawing. Cut the plastic tie near
the Upright Wire (70). Be careful not to damage
the Upright Wire.
80
Cut
77
7
Hole
70
Tie
Cut
70
3.Identify the Left Upright (75). Have a second
person hold the Left Upright near the Base (80).
3
75
See the inset drawing. Tie the wire tie in the
Left Upright (75) securely around the end of the
Upright Wire (70). Then, insert the Upright Wire
into the lower end of the Left Upright as you pull
the other end of the wire tie through the Left
Upright.
Wire
Tie
70
Wire
Tie
70
75
80
4.With the help of a second person, hold the Left
Upright (75) against the Base (80). Be careful
not to pinch the wires.
4
Partially tighten three 3/8" x 4" Screws (4) with
three 3/8" Star Washers (5) into the Left Upright
(75) and the Base (80); do not fully tighten the
Screws yet.
75
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the right
side.
5
4
Wires
80
8
5. Identify the Left and Right Base Covers (73, 74).
Slide the Left and Right Base Covers onto the
Left and Right Uprights (75, 76) as shown.
5
76
75
74
73
6.Set a Handrail (71) on the Left Upright (75).
Make sure that the Upright Wire (70) is not
pinched.
6
Attach the Handrail (71) with two 5/16" x 2 1/4"
Screws (7) and two 5/16" Star Washers (8).
Start both Screws, and then tighten them.
7
8
Attach the other Handrail (not shown) in the
same way. Note: There is no wire on the right
side.
A
71
Remove and discard the two indicated screws
(A) from each of the Handrails (71) (only one
side is shown).
70
75
9
7.Set the console assembly face down on a soft
surface to avoid scratching the console assembly. Remove and save the four 1/4" x 1/2"
Screws (9). They will be used in step 9.
7
10
10
Identify the Left Tray (90). Attach the Left Tray
with four #8 x 1/2" Screws (10). Start all four
Screws before tightening them. Be careful not
to overtighten the Screws.
10
90
9
Attach the Right Tray (85) in the same way.
10
Console
Assembly
85
9
8.With the help of a second person, hold the console assembly near the Left Upright (75).
8
Console
Assembly
Connect the Upright Wire (70) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. If YOU DO NOT CONNECT the connectors properly, the console may
become damaged when you turn on
the power. Then, remove the wire tie from
the Upright Wire.
Console
Wire
70
Console
Wire
70
10
Wire
Tie
75
9.Set the console assembly on the Handrails (71).
Be careful not to pinch any wires. Insert the
excess Upright Wire (70) into the Left
Upright (75).
9
Attach the console assembly with the four 1/4"
x 1/2" Screws (9) you removed in step 7 and
four 1/4" Star Washers (11); do not tighten the
Screws yet.
71
70
11
9
71
11
Console
Assembly
9
75
10.IMPORTANT: To avoid damaging the Pulse
Crossbar (31), do not use power tools and do
not overtighten the #10 x 3/4" Screws (13).
10
Tighten four #10 x 3/4" Screws (13) with four 1/4"
Star Washers (11) into the Pulse Crossbar (31)
and the Handrails (71). Start all four Screws,
and then tighten them.
13
11
See step 9. Tighten the four 1/4" x 1/2"
Screws (9).
71
Console
Assembly
13
11
71
11
31
11.Identify the Left and Right Handrail
Inserts (35, 69).
11
Attach the Left Handrail Insert (35) to the left
Handrail (71) with three #8 x 3/4" Screws (6).
Tip: Slide the Left Handrail Insert up against
the console assembly, and then tighten the
Screws.
Console
Assembly
35
Attach the Right Handrail Insert (69) to the
right Handrail (71) in the same way.
71
69
6
71
6
12.Identify the Left and Right Handrail
Covers (72, 88).
Slide the Left Handrail Cover (72) up against the
console assembly and tighten a #8 x 3/4"
Screw (6) into the bottom of the Cover. Be careful not to overtighten the Screw.
Attach the Right Handrail Cover (88) in the
same way.
See step 4. Tighten the six 3/8" x 4"
Screws (4).
12
Console
Assembly
72
6
88
6
12
13.Raise the Frame (49) to the position shown.
Have a second person hold the Frame
through assembly step 15.
13
Attach the Latch Crossbar (96) to the Frame (49)
with two 1/4" x 1 3/4" Screws (95).
49
95
96
14.Orient the Storage Latch (51) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (51) to
the Base (80) with an M8 x 50mm Bolt (105) and
an M8 Nut (61).
Attach the upper end of the Storage Latch (51)
to the Latch Crossbar (96) with an M8 x 45mm
Bolt (12) and an M8 Nut (61).
14
96
61
12
51
Latch
Knob
Large
Barrel
61
105
80
13
15.Attach a Wheel (81) to the Base (80) with a
3/8" x 2 1/2" Bolt (2) and a 3/8" Nut (3). Do not
overtighten the Nut; the Wheel must turn
freely.
15
Attach the other Wheel (81) to the other side
of the Base (80) in the same way.
Lower the Frame (not shown) (see HOW TO
LOWER THE TREADMILL FOR USE on
page 24).
81
80
3
81
2
16.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see pages 26 and 27).
14
THE CHEST HEART RATE MONITOR
HOW TO PUT ON THE HEART RATE MONITOR
The heart rate
monitor consists of
a chest strap and a
sensor. Insert the
tab on one end of
the chest strap into
the hole in one end
of the sensor as
shown. Then, press
the end of the sensor under the buckle
on the chest strap.
The tab should be
flush with the front of
the sensor.
Tabs
• Do not expose the heart rate monitor to direct sunlight for extended periods of time; do not expose it to
temperatures above 122° F (50° C) or below 14° F
(-10° C).
Chest
Strap
• Do not excessively bend or stretch the sensor when
using or storing the heart rate monitor.
Sensor
• To clean the sensor, use a damp cloth and a small
amount of mild soap. Then, wipe the sensor with a
damp cloth and thoroughly dry it with a soft towel.
Never use alcohol, abrasives, or chemicals to clean
the sensor. Hand wash and air dry the chest strap.
TROUBLESHOOTING
Tab
If the heart rate monitor does not function properly, try
the steps below.
Sensor Buckle
The heart rate monitor must be worn
under your clothes,
tight against your
skin. Wrap the heart
rate monitor around
your chest in the
location shown.
Make sure that
the logo is rightside-up. Then, attach the other end of the chest strap
to the sensor. Adjust the length of the chest strap, if
necessary.
• Make sure that you are wearing the heart rate monitor as described at the left. If the heart rate monitor
does not function when positioned as described,
move it slightly lower or higher on your chest.
• If heart rate readings are not displayed until you
begin perspiring, rewet the electrode areas.
• For the console to display heart rate readings, you
must be within arm’s length of the console.
• If there is a battery cover on the back of the sensor,
replace the battery with a new battery of the same
type.
Pull the sensor away from your body a few inches and
locate the two electrode areas, which are covered by
shallow ridges. Using saline solution such as saliva or
contact lens solution, wet the electrode areas. Then,
return the sensor to a position against your chest.
• The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical conditions such as premature ventricular contractions
(pvcs), tachycardia bursts, and arrhythmia.
CARE AND MAINTENANCE
• The operation of the heart rate monitor can be
affected by magnetic interference from high power
lines or other sources. If you suspect that magnetic
interference is causing a problem, try relocating the
fitness equipment.
• Thoroughly dry the sensor with a soft towel after
each use. Moisture may keep the sensor activated,
shortening the life of the battery.
• Store the heart rate monitor in a warm, dry place. Do
not store the heart rate monitor in a plastic bag or
other container that may trap moisture.
15
SP
OPERATION AND ADJUSTMENT
HOW TO PLUG IN THE POWER CORD
Follow the steps below to plug in the power cord.
This product must be earthed. If it should malfunction or break down, earthing provides a path of least
resistance for electric current to reduce the risk of
electric shock. This product’s power cord has an
equipment-earthing conductor and an earthing plug.
IMPORTANT: If the power cord is damaged, it must
be replaced with a manufacturer-recommended
power cord.
1. P
lug the indicated end of the power cord into the
socket on the treadmill.
Socket on Treadmill
AUS
DANGER: Improper connection of
the equipment-earthing conductor can result
in an increased risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the product
is properly earthed. Do not modify the plug
provided with the product—if it will not fit
the outlet, have a proper outlet installed by a
qualified electrician.
Power Cord
2. P
lug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with
all local codes and ordinances.
Australia
UK
Outlet
GR
Outlet
UK
AUS
FR/SP
GR
RU
16HU
GR
RU
HU
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
You can even listen to your favorite workout music or
audio books with the console’s stereo sound system
while you exercise.
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable. When you use the manual mode,
you can change the speed and incline of the treadmill
with the touch of a button. As you exercise, the console
will display instant exercise feedback. You can even
measure your heart rate using the chest heart rate
monitor.
To turn on the power, see page 18. To use the manual mode, see page 18. To use an onboard workout,
see page 20. To use an iFit workout, see page 21.
To use the stereo sound system, see page 22. To
use the information mode, see page 23.
Note: The console can display speed and distance in
either miles or kilometers. To find which unit of measurement is selected, see THE INFORMATION MODE
on page 23. For simplicity, all instructions in this section refer to kilometers.
In addition, the console features a selection of onboard workouts. Each workout automatically controls
the speed and incline of the treadmill as it guides you
through an effective exercise session.
The console also features an iFit mode that enables
the treadmill to communicate with your wireless
network through an optional iFit module. With the
iFit mode, you can download personalized workouts,
create your own workouts, track your workout results,
race against other iFit users, and access many other
features. To purchase an iFit module at any time, go
to www.iFit.com or call the telephone number on
the front cover of this manual.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 27).
ETPE99713
(PFTL99713)
17
HOW TO TURN ON THE POWER
HOW TO USE THE MANUAL MODE
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
1.Insert the key into the console.
Plug in the power cord (see
page 16). Next, locate the
power switch on the treadmill frame near the power
cord. Press the power switch
into the reset position.
Press the Manual button on the console. If you
are not connected to iFit, the manual mode will be
selected automatically.
See HOW TO TURN ON THE POWER at the left.
2.Select the manual mode.
Reset
3. Start the walking belt.
To start the walking belt, press the Start button, the
Speed increase button, or one of the Speed buttons numbered 2 through 20.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as
you plug in the power cord and press the power
switch into the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see THE INFORMATION MODE on page
23 to turn off the demo mode.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at
2 Km/H. As you exercise, change the speed of
the walking belt as desired by pressing the Speed
increase and decrease buttons. Each time you
press one of the buttons, the speed setting will
change by 0.1 Km/H; if you hold down the button,
the speed setting will change in increments of
0.5 Km/H. Note: After you press the button, it may
ETPE99713
take a moment for
the walking belt to reach the
selected speed (PFTL99713)
setting.
Next, stand on the
foot rails of the
treadmill. Find the
clip attached to the
key and slide the
clip onto the waistKey
band of your clothes.
Then, insert the key
Clip
into the console.
After a moment, the
displays will light. IMPORTANT: In an emergency,
the key can be pulled from the console, causing
the walking belt to slow to a stop. Test the clip by
carefully taking a few steps backward; if the key is
not pulled from the console, adjust the position of
the clip.
If you press one of the numbered Speed buttons,
the walking belt will gradually change speed until it
reaches the selected speed setting.
To stop the walking belt, press the Stop button.
The time will begin to flash in the display. To restart
the walking belt, press the Start button or the
Speed increase button.
4. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase or decrease button or one of the
Incline buttons numbered 1 through 10. Each time
you press one of the buttons, the treadmill will
gradually adjust to the selected incline setting.
18
5.Follow your progress with the displays.
6. Measure your heart rate if desired.
The matrix—When
you select the manual
mode, the matrix will
display a track that
represents 400­m (1/4
mile). As you exercise,
the indicators around the track will appear in succession until the entire track appears. The track will
then disappear and the indicators will again begin
to appear in succession.
Note: If you use the handgrip heart rate monitor and the chest heart rate monitor at the same
time, the console will not display your heart
rate accurately. For information about the chest
heart rate monitor, see page 15.
Before using
the handgrip heart
rate monitor,
remove the
sheets of plastic from the
metal contacts
Contacts
on the pulse
bar. In addition, make
sure that your hands are clean.
The Incline/Calories
display—This display will show the
approximate number
of calories you have
burned. The display
will also show the incline of the treadmill for a
few seconds each time the incline of the treadmill
changes.
To measure your heart rate, stand on the foot
rails and hold the pulse bar with your palms on the
metal contacts; avoid moving your hands. When
your pulse is detected, several dashes will appear
and then your heart rate will be shown. For the
most accurate heart rate reading, continue to
hold the contacts for about 15 seconds.
The Time/Pulse
display—This display
will show the elapsed
time. The display will
also show your heart
rate when you use the
handgrip heart rate monitor (see step 6).
The Distance/Speed
display—This display
can show the distance
that you have walked
or run. The display will
also show the speed of
the walking belt for a few seconds each time the
speed changes.
he Center display—This display will show workT
out instructions.
7. Turn on the fan if desired.
The fan features multiple speed settings. Press the fan increase or decrease button to select a fan speed or
to turn off the fan. Note: If the fan is on
when the walking belt is stopped, the
fan will turn off automatically after a few
minutes.
8.When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to zero. The
incline must be at zero or you may damage the
treadmill when you fold it to the storage position. Next, remove the key from the console and
put it in a secure place.
Press the Home button to return to the start mode
(see THE INFORMATION MODE on page 23 to
set the start mode). If necessary, press the Home
button again.
When an iFit module is connected to iFit.com, the
iFit symbol will light.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
To reset the displays, press the Stop button,
remove the key, and then reinsert the key.
19
HOW TO USE AN ONBOARD WORKOUT
The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 18.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors
such as your weight. In addition, if you manually change the speed or incline of the treadmill
during the workout, the number of calories you
burn will be affected.
2. Select an onboard workout.
To select an onboard workout, press the Calorie
button, the Intensity button, the Speed button, or
the Incline button repeatedly until the desired workout appears in the display.
When you select an onboard workout, the displays
will show the maximum incline, the duration, the
maximum speed, and the name of the workout. In
addition, a profile of the speed settings of the workout will appear in the matrix. If you select a calorie
workout, the approximate number of calories you
will burn will appear in the name of the workout.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
3. Start the workout.
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 2 Km/H. When the next segment
of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the
next segment.
ress the Start button or the Speed increase butP
ton to start the workout. A moment after you press
the button, the treadmill will automatically adjust to
the first speed and incline settings of the workout.
Hold the handrails and begin walking. Note: If you
select a speed workout, the exercise session will
begin with a three-minute warm-up segment before
the speed workout begins.
4. Follow your progress with the displays.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting and/
or incline setting may be programmed for consecutive segments.
See step 5 on page 19. The Time/Pulse display
will show the time remaining instead of the elapsed
time.
5. Measure your heart rate if desired.
During the workout, the
Current Segment
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout. The height of the flashing segment indicates
the speed setting for the current segment. At the
end of each segment, a series of tones will sound
and the next segment of the profile will begin to
flash. If a new speed and/or incline setting is
programmed for the next segment, the new speed
and/or incline setting will appear in the displays for
a few seconds and the treadmill will automatically
adjust to the new speed and/or incline setting.
See step 6 on page 19.
6. Turn on the fan if desired.
See step 7 on page 19.
7. W
hen you are finished exercising, remove the
key from the console.
20
See step 8 on page 19.
HOW TO USE AN IFIT WORKOUT
download the next workout of that type in your
schedule. To compete in a race that you have
previously scheduled, press the Compete button.
Note: To use an iFit workout, you must have an
optional iFit module. To purchase an iFit module at
any time, go to www.iFit.com or call the telephone
number on the front cover of this manual. You must
also have access to a computer with a USB port and
an internet connection. In addition, you must have
access to a wireless network including an 802.11b/g/n
router with SSID broadcast enabled (hidden networks
are not supported). An iFit.com membership is also
required.
To re-run a recent iFit workout from your schedule, first press the Track button. Next, press the
increase and decrease buttons to select the
desired workout. Then, press the Enter button to
start the workout.
For more information about the iFit workouts,
please see www.iFit.com.
1. Insert the key into the console.
When you select an iFit workout, the display will
show the name, duration, maximum speed setting,
and distance of the workout. The display will also
show the approximate number of calories you will
burn during the workout and a profile of the speed
settings of the workout.
See HOW TO TURN ON THE POWER on page 18.
2. Insert the iFit module into the console.
o insert the iFit module, see the instructions inT
cluded with the iFit module.
If you select a competition workout, the display may
count down to the beginning of the race.
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in
the iFit module must be at least 8 in. (20 cm)
from all persons and must not be near or connected to any other antenna or transmitter.
5. Start the workout.
During some workouts, the voice of an audio
coach will guide you through your workout. You
can select a setting for your audio coach (see THE
INFORMATION MODE on page 23).
3. Select a user.
See step 3 on page 20.
If more than one user is registered, you can switch
users in the iFit main screen. Press the increase
and decrease buttons next to the Enter button to
select a user.
4. Select an iFit workout.
To download an iFit workout in your schedule,
press the Map, Train, or Lose Wt. button to
21
HOW TO USE THE SOUND SYSTEM
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at the speed setting for the first
segment of the workout. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player; make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
6. Follow your progress with the displays.
Next, press the play button on your personal audio player. Adjust the volume level
using the volume increase and decrease
buttons on the console or the volume control on your personal audio player.
See step 5 on page 19.
7. Measure your heart rate if desired.
See step 6 on page 19.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface instead of on the console.
8. Turn on the fan if desired.
See step 7 on page 19.
9. W
hen you are finished exercising, remove the
key from the console.
See step 8 on page 19.
For more information about the iFit mode, go to
www.iFit.com.
22
THE INFORMATION MODE
CONTRAST LVL—Press the Incline increase and
decrease buttons to adjust the contrast level of the
displays.
The console features an information mode that keeps
track of treadmill information and allows you to personalize console settings.
If a module is connected, you may also select
the following screens:
1. Select the information mode.
MODULE—If an iFit module is connected, the
display will show the word WIFI. If a USB module is
connected, the display will show the word USB/SD.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
AUDIO COACH—To turn on or turn off the audio
coach, press the Enter button.
The Time/Pulse display will show the total number
of hours the treadmill has been used.
If an iFit module is connected, you may also
select the following screens:
The Distance/Speed display will show the total
number of kilometers (or miles) that the walking
belt has moved.
START MODE—The start mode will appear when
you insert the key into the console. Press the Enter
button to select the manual mode or the iFit mode
as the start mode.
2. Select the optional screens.
CHECK WIFI—Press the Enter button. The center
display will show the software version number,
the network SSID, the network encryption type,
the wireless signal strength, the IP address of
the module, the number of registered users and
their names, and the results of the DNS lookup.
To return to the information mode, remove the key
from the console and repeat the instructions near
the beginning of this page.
While the information mode is selected, press the
decrease button next to the Home button to select
each of the following screens in the center display:
UNITS—To change the unit of measurement, press
the Enter button or the Speed increase button. To
view distance in miles, select ENGLISH. To view
distance in kilometers, select METRIC.
DEMO MODE—The console features a display
demo mode, designed to be used if the treadmill
is displayed in a store. While the demo mode is
turned on, the console will function normally when
you plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word
ON will appear in the center display. To turn on or
turn off the demo mode, press the Enter button or
the Speed decrease button.
SEND/OBTAIN DATA—To send and receive workouts, workout logs, and updates, press the Enter
button. When the process is finished, the words
TRANSFERS DONE will appear in the display.
3. Exit the information mode.
To exit the information mode, remove the key from
the console.
23
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
HOW TO MOVE THE TREADMILL
To avoid damaging the treadmill, adjust the incline
to zero before you fold the treadmill. Then, remove
the key and unplug the power cord. CAUTION: You
must be able to safely lift 45 lbs. (20 kg) to raise,
lower, or move the treadmill.
efore moving the treadmill, fold it as described at the
B
left. CAUTION: Make sure that the latch knob is
locked in the storage position. Moving the treadmill
may require two people.
1. Hold the metal frame firmly in the location shown
by the arrow below. CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs
and keep your back straight.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.
1
Handrail
1
Frame
Frame
Wheel
2.Raise the frame until the latch knob locks in the
storage position. CAUTION: Make sure that the
latch knob locks.
2
Frame
2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.
3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
Latch
Knob
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
1.
See drawing 2. Hold the upper end of the treadmill
frame with your right hand. Pull the latch knob to
the left. IMPORTANT: Do not turn the latch knob.
If necessary, push the frame forward slightly. Pivot
the frame downward a few inches, and release the
latch knob.
See drawing 1 at the left. Hold the metal frame
2.
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
24
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.
SYMPTOM: The console displays remain lit when
you remove the key from the console
a.The console features a display demo mode,
designed to be used if the treadmill is displayed in
a store. If the displays remain lit when you remove
the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a
few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 23 to turn off the
demo mode.
SYMPTOM: The power does not turn on
a.Make sure that the power cord is plugged into a
properly earthed outlet (see page 16). If an extension cord is needed, use only a 3-conductor,
14-gauge (1 mm2) cord that is no longer than
5 ft. (1.5 m).
SYMPTOM: the displays of the console do not
function properly
b.After the power cord has been plugged in, make
sure that the key is inserted into the console.
a.Remove the key from the console and uNplug
the power cord. Place the treadmill in
the storage position (see HOW TO FOLD THE
TREADMILL on page 24).
c.Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for five minutes and then press
the switch back in.
Next, remove the two indicated #8 x 3/4"
Screws (6).
c
a
Tripped
Reset
6
6
SYMPTOM: The power turns off during use
a.Check the power switch (see the drawing above).
If the switch has tripped, wait for five minutes and
then press the switch back in.
Lower the treadmill (see HOW TO LOWER THE
TREADMILL FOR USE on page 24). Remove the
five #8 x 3/4" Screws (6). Carefully slide the Motor
Hood (57) off.
b.Make sure that the power cord is plugged in. If the
power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
c.Remove the key from the console, and then
reinsert it.
6
d.If the treadmill still will not run, please see the front
cover of this manual.
57
6
6
25
SYMPTOM: The walking belt slows when walked on
Locate the Reed Switch (93) and the Magnet (44)
on the left side of the Pulley (43). Turn the Pulley
until the Magnet is aligned with the Reed Switch.
Make sure that the gap between the Magnet
and the Reed Switch is about 1/8 in. (3 mm). If
necessary, loosen the #8 x 3/4" Truss Head
Screw (19), move the Reed Switch slightly, and
then retighten the Screw. Reattach the Motor Hood
(not shown) with the seven #8 x 3/4" Screws (not
shown) and run the treadmill for a few minutes to
check for a correct speed reading.
If an extension cord is needed, use only a 3-cona.
ductor, 14-gauge (1 mm2) cord that is no longer
than 5 ft. (1.5 m).
b.If the walking belt is overtightened, treadmill performance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller screws counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
Front
View
43
19
44
93
1/8 in.
b
2–3 in.
SYMPTOM: The incline of the treadmill does not
change correctly
a. Hold down the Stop button and the Speed increase
button, insert the key into the console, and then
release the Stop button and the Speed increase
button. Press the Stop button and then press the
Incline increase or decrease button. The treadmill will automatically rise to the maximum incline
level and then return to the minimum level. This will
recalibrate the incline system. If the incline does not
begin calibrating, press the Stop button again, and
then press the Incline increase or decrease button
again. When the incline is calibrated, remove the
key from the console.
Idler Roller Screws
c.Your treadmill features a walking belt coated with
high-performance lubricant. IMPORTANT: Never
apply silicone spray or other substances to
the walking belt or the walking platform unless
instructed to do so by an authorized service
representative. Such substances may deteriorate the walking belt and cause excessive wear.
If you suspect that the walking belt needs more
lubricant, see the front cover of this manual.
d.If the walking belt still slows when walked on, see
the front cover of this manual.
26
SYMPTOM: The walking belt is not centered
between the foot rails
SYMPTOM: The walking belt slips when walked on
a. F
irst, remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
IMPORTANT: If the walking belt rubs against the
foot rails, the walking belt may become damaged.
a. F
irst, remove the key and UNPLUG THE POWER
CORD. If the walking belt has shifted to the left,
use the hex key to turn the left idler roller screw
clockwise 1/2 of a turn; if the walking belt has
shifted to the right, turn the left idler roller screw
counterclockwise 1/2 of a turn. Be careful not to
overtighten the walking belt. Then, plug in the
power cord, insert the key, and run the treadmill
for a few minutes. Repeat until the walking belt is
centered.
a
a
Foot Rails
27
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise; never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
28
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch­—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from your
hips. Allow your back and shoulders to relax as you reach down toward
your toes as far as possible. Hold for 15 counts, then relax. Repeat 3
times. Stretches: Hamstrings, back of knees and back.
1
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and
groin.
2
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your hands
against a wall. Keep your back leg straight and your back foot flat on
the floor. Bend your front leg, lean forward and move your hips toward
the wall. Hold for 15 counts, then relax. Repeat 3 times for each leg. To
cause further stretching of the achilles tendons, bend your back leg as
well. Stretches: Calves, achilles tendons and ankles.
3
4. Quadriceps Stretch
4
With one hand against a wall for balance, reach back and grasp one
foot with your other hand. Bring your heel as close to your buttocks as
possible. Hold for 15 counts, then relax. Repeat 3 times for each leg.
Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull
your feet toward your groin area as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Quadriceps and hip muscles.
5
29
PART LIST
Model No. PETL99713.0 R0513A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
#8 x 1/2" Ground Screw
3/8" x 2 1/2" Bolt
3/8" Nut
3/8" x 4" Screw
3/8" Star Washer
#8 x 3/4" Screw
5/16" x 2 1/4" Screw
5/16" Star Washer
1/4" x 1/2" Screw
#8 x 1/2" Screw
1/4" Star Washer
M8 x 45mm Bolt
#10 x 3/4" Screw
1/4" x 2 1/2" Screw
3/8" x 1 3/8" Bolt
1/2" x 2 1/4" Bolt
1/2" Nut
Hood Clip
#8 x 3/4" Truss Head Screw
3/8" x 1 3/4" Bolt
3/8" Locknut
Incline Motor Spacer
1/4" x 3/8" Screw
#8 x 1/2" Screw
5/16" x 1 1/4" Bolt
#8 x 1" Screw
5/16" x 1 3/4" Bolt
5/16" Washer
5/16" Nut
Base Pad Spacer
Pulse Crossbar
1/4" x 2" Screw
#8 x 1" Tek Screw
Isolator Bottom
Left Handrail Insert
Platform Cushion
Left Foot Rail
Latch Warning Decal
Walking Platform
Walking Belt
Belt Guide
Rubber Spacer
Drive Roller/Pulley
Magnet
Reed Switch Clamp
Drive Motor Belt
Drive Motor
Frame Spacer
Frame
Right Foot Rail
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Storage Latch
Right Rear Foot
Left Rear Foot
#8 x 3/4" Washer Head Screw
#8 x 1/2" Controller Screw
Idler Roller
Motor Hood
Incline Frame Spacer
Incline Frame
Incline Motor
M8 Nut
Controller
Wire Tie
Belly Pan Plate
Power Switch
Power Cord
Grommet
Belly Pan
Right Handrail Insert
Upright Wire
Handrail
Left Handrail Cover
Left Base Cover
Right Base Cover
Left Upright
Right Upright
Base Cap
Caution Decal
Base Pad
Base
Wheel
Key/Clip
Console Base
Module Housing
Right Tray
Console
Console Frame
Right Handrail Cover
Console Ground Wire
Left Tray
Cable Tie
Console Clamp
Reed Switch
Small Cushion
1/4" x 1 3/4" Screw
Latch Crossbar
Motor Bushing
Motor Isolator
#8 x 1/2" Machine Screw
Filter
3
2
2
6
6
41
4
4
4
8
8
1
4
2
2
2
2
3
9
2
4
2
2
4
2
4
2
2
4
2
1
1
8
4
1
4
1
1
1
1
2
2
1
1
1
1
1
2
1
1
30
1
1
1
10
2
1
1
2
1
1
2
1
3
1
1
1
1
1
1
1
2
1
1
1
1
1
4
2
4
1
2
1
1
1
1
1
1
1
1
1
2
2
1
2
2
1
2
1
7
1
Key No. Qty.
Description
Key No. Qty.
Description
#8 x 3/4" Bolt
#8 Nut
#8 Star Washer
Filter Bracket
M8 x 50mm Bolt
106
107
108
109
*
Grounding Bracket
Receptacle
Chest Strap
Chest Sensor
User’s Manual
101
102
103
104
105
1
1
5
1
1
1
1
1
1
–
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
31
14
32
53
29
54
34
19
36
25
56
54
38
19
34
36
94
19
52
39
14
54
95
19
25
54
37
24
40
41
29
54
54
42
28
54
34
36
61
19
54
29
27
44
95
34
12
96
94
23
36
43
93
45
19
97
54
19
16
1
46
51
50
24
98
48
54
41
47
61
27
42
28
29
104
32
100
49
105
48
99
16
102
103
99
101
EXPLODED DRAWING A
Model No. PETL99713.0 R0513A
EXPLODED DRAWING B
Model No. PETL99713.0 R0513A
6
6
6
6
58
57
21
59
6
21
58
17
20
21
17
60
20
55
99
103
21
22
62
103 99
106
63
18
18
6
6
64
6
18
107
65
6
6
6
68
6
6
33
6
66
EXPLODED DRAWING C
Model No. PETL99713.0 R0513A
35
7
72
8
11
9
71
6
70
6
6
69
75
7
88
8
11
9
6
71
4
6
6
76
15
5
73
77
78
15
1
67
30
79
2
77
33
81
77
79
78
80
5
3
30
79
81
33
33
3
74
77
4
79
33
5
4
2
34
EXPLODED DRAWING D
Model No. PETL99713.0 R0513A
82
91
86
108
109
6
87
1
6
90
92
89
26
92
6
10
10
83
84
26
6
10
10
13
11
31
6
6
6
6
6
6
10
13
11
6
6
10
85
6
10
35
10
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING
near the end of this manual)
RECYCLING INFORMATION
This electronic product must not be disposed of in municipal waste. To
preserve the environment, this product must be recycled after its useful life
as required by law.
Please use recycling facilities that are authorized to collect this type of waste in
your area. In doing so, you will help to conserve natural resources and improve
European standards of environmental protection. If you require more information
about safe and correct disposal methods, please contact your local city office or
the establishment where you purchased this product.
Part No. 344938 R0513A
Printed in China © 2013 ICON IP, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement