SS-USB-100

SS-USB-100
SS-USB-100
User Manual
Ver. 4.00
All brand names and trademarks are properties of their
respective owners.
May/07
1
MN3000000034
Features and Benefits
z
Converts a USB port to a standard 9-pin serial port
z
Supports various serial devices such as modems, PDAs, cellular
phones, digital cameras, card readers, and more
z
Easy Plug and Play Installation
z
Supports serial transmission rate up to 230,400 bps
z
No IRQ resource required
z
Bus Powered – no separate power supply or battery required
z
Supports Windows® 2000, XP, Server 2003 and Vista
z
Cable Length: 1.5 m
Connectors
z
1 x USB Type A connector
z
1 x DB9 Male Connector
Package Contents
z
1 x SS-USB-100
z
1 x Driver CD
May/07
2
MN3000000034
System Requirements
z
Windows® 2000/XP/Server 2003/Vista
z
USB 1.1 or higher port
Driver Installation
For Windows® 2000/XP/Server 2003
1.
Don’t plug in SS-USB-100 connector of your computer until
driver installation is complete.
2.
Please insert the driver CD that came with your SS-USB-100 into
your CD-ROM Drive.
3.
At the Windows desktop click Start, then Run.
4.
Type D:\Drivers\USB\SS-USB-100\Setup.exe, then click OK.
(Change D: to match your CD-ROM drive letter)
5.
Follow the on-screen instructions to complete the installation.
6.
Plug the SS-USB-100 into your computer’s USB port.
7.
Open “Device Manager” under System Properties and check if
there is the device you install under “Prolific USB-to-Serial
Comm Port…”.
8.
The SS-USB-100 is now ready to use.
May/07
3
MN3000000034
For Windows® Vista
1.
Don’t plug in the SS-USB-100 into the USB connector of your
computer until driver installation is complete.
2.
Please insert the driver CD that came with your SS-USB-100 into
your CD-ROM Drive.
3.
At the Windows desktop click Start, then Run.
4.
Type D:\Drivers\USB\SS-USB-100\Setup.exe, then click OK.
5.
Follow the on-screen instructions to complete the installation.
6.
Plug the SS-USB-10 into your computer’s USB port.
7.
Open “Device Manager” under System Properties and you should
(Change D: to match your CD-ROM drive letter)
see the device listed as “Prolific USB-to-Serial Comm Port …”.
8.
The SS-USB-100 is now ready to use.
Changing COM Port Number
Some serial devices need a special COM port in order to work. If your
serial device works properly, do not change this setting.
1.
From the Device Manager window double click Ports(COM &
LPT), then double click the Prolific USB-to-Serial Comm Port
you want to change.
2.
Click Port Settings tab and click Advanced… button.
May/07
4
MN3000000034
3.
Click the down arrow that is next to the COM Port Number box,
select a COM port that is not in use, then click OK.
4.
Click OK, then close Device Manager to save the changes.
May/07
5
MN3000000034
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement