Hands-on Test Drive. This Autodesk

Add to my manuals
73 Pages

advertisement

Hands-on Test Drive. This Autodesk | Manualzz

Hands-on Test Drive

Includes Tutorial Material for AutoCAD® Users

© 2011 Autodesk, Inc. All rights reserved.

Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose.

Certain materials included in this publication are reprinted with the permission of the copyright holder.

Trademarks

The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, ADI, Algor, Alias, Alias (swirl design/logo),

AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD

Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Intent, Autodesk

Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner,

Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D,

Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content

Explorer, Create>what’s>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer’s Toolkit,

DesignKids, DesignProf, DesignServer, DesignStudio, Design|Studio (design/logo), Design Web Format, Discreet, DWF, DWG,

DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face

Robot, FBX, Fempro, Filmbox, Fire, Flame, Flint, FMDesktop, Freewheel, Frost, GDX Driver, Gmax, Green Building Studio,

Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor LT,

Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, Lustre, MatchMover, Maya, Mechanical Desktop, Moldflow,

Moonbox, MotionBuilder, Movimento, MPA, MPA (design/logo), Moldflow Plastics Advisers, MPI, Moldflow Plastics Insight,

MPX, MPX (design/logo), Moldflow Plastics Xpert, Mudbox, Multi-Master Editing, NavisWorks, ObjectARX, ObjectDBX, Open

Reality, Opticore, Opticore Opus, Pipeplus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream,

ProjectPoint, ProMaterials, RasterDWG, Reactor, RealDWG, Real-time Roto, REALVIZ, Recognize, Render Queue, Retimer,

Reveal, Revit, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo), Sparks, SteeringWheels,

Stitcher, Stone, StudioTools, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual Construction, Visual Drainage, Visual

Landscape, Visual Survey, Visual Toolbox, Visual LISP, Voice Reality, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI

(design/logo).

All other brand names, product names, or trademarks belong to their respective holders.

Disclaimer

THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. “AS IS.”

AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE

MATERIALS.

Published by:

Autodesk, Inc.

111 Mclnnis Parkway

San Rafael, CA 94903, USA

Contents

Lesson: Autodesk Inventor 2012: Test Drive .............................................................. 3

Top 10 Reasons to Move from AutoCAD to Autodesk Inventor .............................. 5

Exercise: Project Setup .................................................................................................... 10

Exercise: Part Modeling ......................................................................................................11

Exercise: Assembly Modeling ......................................................................................... 22

Exercise: Advanced Visualization ....................................................................................41

Exercise: Drawings ............................................................................................................. 45

Exercise: Presentation Files ..............................................................................................61

Conclusion ........................................................................................................................... 68

Contents I

Autodesk Inventor 2012: Test Drive 1

2 Autodesk Inventor 2012: Test Drive

Welcome

Welcome to the Autodesk ® Inventor ® Hands-on Test Drive. This Autodesk Inventor Test Drive is designed to guide AutoCAD ® users through the basic processes of 3D product design and show how using Autodesk Inventor can improve their product development operations. As the creators of

AutoCAD software, Autodesk ® understands your design process and has designed Inventor to make the process of adding 3D as easy as possible.

While working on the design, you will see how, with 3D modeling, you can quickly create and refine your complete product design while simplifying the production and revision of manufacturing drawings. The exercises illustrate key elements of workflows involved in the design of fabricated parts and multi-part assemblies.

Although you can use this Test Drive at your own pace, these materials are intended for use in an

Autodesk Authorized Reseller-led workshop environment. To optimize learning, your Reseller will guide you through the exercises. You should be able to complete all of the exercises in this booklet in approximately 3 hours.

Thank you for your interest in Autodesk ® Inventor ® . We sincerely hope that this tutorial will give you insight into the benefits of using Autodesk Inventor to improve your product development operations.

- The Autodesk Inventor Team

For more information or assistance using your Autodesk Inventor Hands-on Test Drive, please contact your Autodesk Authorized Reseller. www.autodesk.com/reseller

Autodesk Inventor 2012: Test Drive 3

Installing Your Inventor Trial Software

1. Install all important Windows updates that are pending on your machine and reboot.

n

Windows XP: You can do this from the Windows Update utility located in the Control Panel.

n

Windows Vista: Windows Update is located in the Control Panel, System and Maintenance

section.

n

Windows 7: Windows Update is located in the Control Panel, System and Security section.

2. Uninstall any of the following Autodesk Inventor 2012 Beta and its prerequisite products if you

installed them previously.

n

Autodesk Inventor 2012 Beta n

DWG TrueVIEW 2012

Start the installer.

3. If Windows Automatic Update is enabled, ensure that it is not run during the Inventor installation.

If it does run and reboots the system during the Inventor installation, restart the Inventor

installation.

4. Insert the CD marked Hands-on Test-Drive.

5. Double-click Autodesk_Inventor_2012_TestDrive_English_Win.exe to start the installation.

6. In the Review - Configure - Install dialog box, click Configure to set preferences.

7. After configuration, start to install.

8. When the installation is done, click Finish.

CD Contents

The CD attached to the back cover of this book contains all the data and drawings you need to complete the exercises in this test drive.

Installing the Exercise Data Files from the CD

To install the data files for the exercises:

1. Insert the CD.

2. Double-click the self-extracting archive Autodesk_Inventor_2012_TestDrive_English_Win.exe.

Unless you specify a different folder, the exercise files are installed in the following folder:

C:\Autodesk\Inventor 2012 Test Drive

After you install the data from the CD, this folder contains all the files necessary to complete each exercise in the test drive.

4 Autodesk Inventor 2012: Test Drive

Top 10 Reasons to Move from AutoCAD to Autodesk Inventor

Autodesk

®

Inventor

®

software takes you beyond 3D to Digital Prototyping.

Move beyond 3D and develop a complete digital prototype of your product with Autodesk ® Inventor ® . Inventor ® software allows engineers to integrate AutoCAD drawings and 3D data into a single digital model creating a virtual representation of the final product. Using the single digital model, you can design, visualize and simulate your product digitally, minimizing the need for physical prototypes.

Inventor software includes comprehensive tools to generate accurate engineering and manufacturing documentation directly from the 3D model and makes it easy for AutoCAD ® software users to realize the benefits of Digital Prototyping by taking full advantage of their investments in DWG™ design data and AutoCAD® software expertise.

Inventor products also offer a wide range of tools to simplify the adoption of and transition to 3D design for AutoCAD ® software users. All Inventor bundles include the latest version of AutoCAD ® Mechanical software for those situations when users just need a high-productivity 2D mechanical drafting tool.

Learn how Autodesk Inventor software is changing the way AutoCAD ® users think about their design processes.

1. DWG TrueConnect

With DWG ™ TrueConnect, Inventor software provides read and write of DWG files without translators. Users can leverage their valuable DWG data to build accurate 3D part models and produce new documentation in the DWG format that’s fully associative to the 3D design. Experience the benefits of Digital Prototyping with rapid access to native DWG data. Update old 2D drawings by inserting views of new 3D designs to reduce the cost of upgrading existing plants and equipment. And because engineers can save drawings in DWG format, they can easily share insights gained from the digital prototype with partners and suppliers who rely on AutoCAD. Views generated from 3D parts and assembly designs can also be combined with AutoCAD data such as schematics and plant layouts.

Autodesk Inventor 2012: Test Drive 5

2. Functional Design

Focus on the functional requirements of a design before committing to creating the model geometry that supports the design intent. Autodesk Inventor products capture the functional requirements of a design to drive the creation of 3D models, enabling engineers to build parts and assemblies based on real-world design input, such as load, speed, and power. With a workflow driven by Functional Design, engineers can rapidly build digital prototypes that validate design functions and catch errors before they reach the manufacturing floor. The result: accelerated design cycles and higher-quality designs.

3. AutoCAD Compatibility

Reduce the time and training required for AutoCAD software users to become proficient in Digital Prototyping workflows by offering a familiar design environment with recognizable icons, AutoCADcompatible shortcuts, cursor-based prompts, and command redo. User profiles enable engineers to configure Inventor to match the way they work, with out-of-the-box profiles for AutoCAD and Inventor experts. In addition, users can transfer their settings among different computers by exporting the profile to XML.

4. Automatic Drawing Updates and Views

Change it once, change it everywhere. Autodesk Inventor associates drawing views to the original components, so a change made to any part or assembly is automatically reflected in all associated drawing sheets. Improve drafting productivity by automatically creating front, side, ISO, detail, section, and auxiliary views of parts and assemblies from the model. Quickly annotate drawings by retrieving the dimension information directly from the design.

6 Autodesk Inventor 2012: Test Drive

5. Integrated Data Management

Autodesk Inventor includes integrated data management with Autodesk ® Vault software, a centralized application for workgroups that securely stores and manages work-in-progress design data and related documents. For additional functionality, such as revision control, file and folder security, and BOM and ECO management, learn more about the complete Vault family of products at Autodesk ® Vault Workgroup, Autodesk ® Vault Collaboration and Autodesk ® Vault

Manufacturing. Find out more at www.autodesk.com/vaultfamily.

6. Bill of Materials

Create automated and associative parts lists and bills of materials (BOMs) that are developed specifically for manufacturing and that automatically update as the design changes. Support is included for multiple parts lists per drawing, collapsible assemblies, automatic recognition of standard parts, and customizable options so features can be revised to match current company practices. Change a design once, and the updates ripple through the entire drawing to keep everyone on schedule, reducing costly stops in production from incorrect parts counting, identification, and ordering. Export or link BOM data to manufacturing resource planning (MRP), enterprise resource planning (ERP), or data-management systems such as

Autodesk Vault software.

Autodesk Inventor 2012: Test Drive 7

7. Technical Documentation

Quickly create assembly drawings and exploded assembly views for use in training manuals and manufacturing instructions.

In the Inventor presentation environment, designers can easily create compelling animated sequences for use in training videos, assembly instructions, and sales presentations, helping them visually communicate their design intent.

8. State-of-the-Art Rendering

Quickly and easily create high-quality, near photorealistic renderings, animations, and presentations that improve communication with customers and other decision makers. Autodesk ® Inventor ® Studio software provides state-of-the-art rendering, illustration, and animation tools in the Inventor design environment.

8 Autodesk Inventor 2012: Test Drive

9. Integrated Stress Analysis and Simulation

Create better-quality parts and avoid field failures by using the finite element analysis (FEA) functionality in Autodesk

Inventor Professional software to determine stresses and deflections under load. Use FEA to optimize parts strength and reduce material costs without compromising performance.

The dynamic simulation functionality in Autodesk ® Inventor ® Professional extends the benefit of the digital prototype, enabling engineers to predict the forces and accelerations experienced by each part in the assembly under real-world conditions with time-varying loads, different friction characteristics, and dynamic components such as springs and dampers.

10. Pipe and Cable Routing

Autodesk Inventor Professional software provides the power to quickly and accurately add routed systems, tube and pipe runs, or cables and wiring harnesses to 3D designs. Routed designs automatically comply with user-defined design rules to reduce errors and save time. As with all Inventor files, the assembly drawings automatically update whenever the routing model is modified.

Now Is the Time

Now is the time to take a look at Autodesk Inventor software and experience the benefits of Digital Prototyping at your own pace with the most trusted resource for leveraging and safeguarding your DWG data. With different product configurations that offer specific levels of functionality to fit your design needs, no company is more focused than

Autodesk on helping you create accurate digital prototypes and bring better products to market faster at less cost.

For more information about Autodesk Inventor, go to www.autodesk.com/inventor.

To locate the reseller nearest you, visit www.autodesk.com/reseller.

Autodesk Inventor 2012: Test Drive 9

Exercise: Project Setup

You must first download and install the following dataset to perform this excercise.

In this first section of the test drive, you learn how to set up a project in Inventor ® .

The data files for each exercise are located in the folder where you installed the training materials. To access these data files for the exercises, you must make the Test Drive

2012 project the active project in Autodesk ® Inventor ® .

1. Start Autodesk Inventor 2012 by double-clicking the shortcut icon on your desktop.

2. On the ribbon, Get Started tab, Launch panel, click Projects.

3. If a Test Drive 2012 project does not appear in the

Projects window, click Browse at the bottom of the dialog box, navigate to the folder where you installed the training materials, and then double-click the Inventor 2012

Test Drive.ipj file.

4. In the Projects window, verify that Inventor 2012

Test Drive has a checkmark next to it. If it does not, double-click it in order to make it the active project.

5. Click Done at the bottom of the Projects window.

By default, the exercises are installed in the C:\Autodesk Learning\Inventor 2012\

Test Drive folder.

10 Autodesk Inventor 2012: Test Drive

Exercise: Part Modeling

In this part of the test drive, you work with Autodesk Inventor and Inventor Fusion to create two different parts. During the creation of the parts you: n

Open an assembly file and review an engineer’s note for the completion of the design.

n

Start a new part and import an AutoCAD drawing to use as the basis of the Claw.

n

Start a new part and model the link rod.

n

Modify the Claw part in Inventor Fusion.

n

Use Change Manager to apply the changes made in Inventor Fusion to the Inventor part file.

The completed excercise

Review the Assembly and Engineers

Notebook

In this section of the test drive, you open and review a partially completed assembly and a note in the

Engineers Notebook.

1. Open Lift_Assy.iam. The partially completed

assembly displays as shown.

3. The assembly includes a design note created in the Engineers Notebook included in Autodesk

Inventor. To view the note, in the browser under Notes, double-click Design Note.

2. Use the Orbit (1) and Zoom (2) tools to view the assembly. When finished return to the Home View (3).

4. Review the note. This note indicates what needs to be completed in the design. During this test drive, you will create and modify parts and subassemblies to complete this digital prototype.

Autodesk Inventor 2012: Test Drive 11

n

In the Open dialog box, click once on

Claw-2D.dwg. Notice that the drawing is previewed in the lower left corner of the dialog box as shown.

n

Click Open. The DWG Import Wizard is activated.

5. On the Engineer’s Notebook tab, Exit panel, click Finish Notebook.

4. To preview the data contained in the AutoCAD file: n

To change the background color of the Import Preview, in the top right corner of the dialog box, select the white button.

n

To pan the preview, position the cursor over the preview and then click and hold down the wheelmouse while dragging to a new position.

n

Use the wheel-mouse to dynamically zoom in and out of the preview.

n

On the Navigation Bar, click Zoom Extents.

Import Data from a DWG File

In this section of the test drive, you begin creating a component by importing data from a DWG™ file.

1. On the Quick Access toolbar, click New.

2. In the New File dialog box: n

Click the Metric tab.

n

Double-click the Standard (mm).ipt. template.

A new part file is created with the sketch

environment active.

3. To begin to insert AutoCAD data: n

On the Sketch tab, Insert panel, click ACAD.

5. To select the layers to import, in the Selective Import list, clear all of the check boxes except for the Part check box as shown. Notice the preview displays only the drawing geometry that resides on the selected layer.

6. To select the geometry to import:

12 Autodesk Inventor 2012: Test Drive

n

In the Selection area, clear the All check box.

n

In the preview window, click and drag a selection box that contains the objects in the right profile as shown.

n

Click Next.

10. Select the area inside the outer boundary and

the two holes defined by the sketch objects.

7. On the Import Destination Options page of the wizard: n

Click the Constrain End Points and Apply geometric constraints check boxes as shown.

n

Click Finish

8. In canvas, right-click. On the marking menu,

click Finish 2D Sketch.

9. To begin creating the solid part from the sketch, in canvas: n

Select a segment of the sketch.

n

On the in-canvas mini toolbar, click Extrude.

11. For the extrusion distance and direction, in canvas: n

Click and drag the arrow handle (1) down until it has an extrusion distance of 25 mm. If you want, after dragging the arrow handle down, you can directly enter the required distance in the field.

n

Click OK.

12. To save the file: n

On the Quick Access toolbar, click Save.

n

In the Save As dialog box, File Name field enter Claw.

n

Click Save.

13. Close Claw.ipt.

Create the Link Rod Component

In this section of the test drive, you create the link rod component for the assembly from scratch in a new part file.

1. Start a new part file. To do this, do the following: n

On the Quick Access toolbar, click New.

n

In the New File dialog box, Metric tab, double-click the Standard (mm).ipt template.

Autodesk Inventor 2012: Test Drive 13

2. To begin to sketch and size the base circle shape for the link rod, in canvas, right-click. In the marking menu, click

Center Point Circle.

6. In the Extrude mini-toolbar: n

In the Distance field, enter 50 mm.

n

In the direction list, select Symmetric.

n

Click OK. The feature is now created like the preview showed.

3. Draw the circle by doing the following: n

For the center of the circle, click the point at the origin of the sketch.

n

In the dimension field, enter 12. Make sure you press

ENTER after typing in the value.

4. Finish editing the sketch. To do this, in canvas, right-click.

On the marking menu, click Finish 2D Sketch.

Note: The value of 50 mm will be modified later in the test drive. The actual length for this part will be determined based on other design criteria of the assembly. You will use Autodesk Inventor’s adaptive capability to establish the length and thus the value for the dimension.

7. To change the viewing angle of the part: n

On the Navigation Bar, click Free Orbit. Rotate your view to match as shown.

n

In canvas, right-click. Click Done.

5. To begin to create a cylinder from this circle, in canvas: n

Select the circle.

n

On the mini-toolbar, click Extrude.

Note: Note: You can hold down the F4 key or SHIFT + wheelmouse to activate the Free Orbit tool at any time

- even while using another tool. Also, while the tool is active, you can click in canvas to have that point be the center point of the orbit.

8. To redefine the Home View: n

Click the corner of the View Cube as shown.

n

Right-click the View Cube, in the menu click

Set Current View as Home > Fit to View.

14 Autodesk Inventor 2012: Test Drive

9. Start the Hole tool using a gesture behavior. To do this, in canvas, right-click drag and release in a direction that is down and to the right of the initial cursor position as shown.

12. To specify the hole and thread depth and create the hole, in the Hole dialog box: n

In the Threads area, clear the Full Depth check box.

n

In the Termination list, select Distance.

n

In the hole depth field, enter 20 mm.

n

In the thread depth field, enter 17 mm.

n

Click OK.

10. To position the hole: n

In the Hole dialog box, Placement list, select

Concentric.

n

In canvas, select the end face of the cylinder.

n

Select the circular edge of the cylinder.

13. To mirror the hole to the other end of the link rod: n

On the Model tab, Pattern panel, click Mirror.

n

In canvas, select the hole feature.

n

In the Mirror dialog box, click the Mirror Plane select button.

n

In the browser under Origin, select XY Plane. The preview displays as shown.

n

Click OK.

11. For the hole type and size, in the Hole dialog box: n

Select Tapped Hole.

n

In the Thread Type list, select ANSI Metric

M Profile.

n

In the Size list, select 8.

14. Orbit the view to see the mirrored feature. To do this, do the following: n

Press and hold SHIFT + wheel-mouse while moving the mouse.

n

Release the key and button when done.

n

Press F6 to return to the Home View.

15. To change the display so you can view all the features of the final part, on the View tab, Appearance panel, in the

Visual Style list, select Shaded With Hidden Edges. The part displays as shown.

Autodesk Inventor 2012: Test Drive 15

16. To set the extrusion as adaptive so its length can be dynamically changed at a later time, in the browser, rightclick Extrusion1. Click Adaptive.

3. To begin to add fillets to the inside edge of the part, in canvas: n

Select the identified edge.

n

Click Fillet.

The adaptive symbol displays next to the feature in the browser. Later in the test drive you use this unique capability of Autodesk

Inventor to have the link rod adapt (change length) to match other components in the assembly.

17. To save the file: n

On the Quick Access toolbar, click Save.

n

In the Save As dialog box, File Name field, enter

LinkRod.

4. Select the outside edge as shown to fillet both edges at the same time and with the same radius.

Modify Parts in Fusion

In this section of the test drive, you open the Claw part and modify it in Inventor Fusion. This enables you to see the use of Fusion as a tool for creating and modifying digital prototypes. Fusion is available for someone who may or may not have Autodesk

Inventor.

1. Start Inventor Fusion 2012 by double-clicking the Inventor

Fusion 2012 shortcut icon on your desktop.

5. In the Adaptive Snap Bar, Snap Value edit box located in the lower right corner of the canvas, enter 2.

2. Open the part Claw.ipt that you created and saved in

Inventor.

6. Set the fillet size by doing the following: n

Click and drag the fillet arrow manipulator to dynamically set the radius of the fillet.

n

In the Radius field, enter 20.

n

In canvas, right-click. Click OK.

16 Autodesk Inventor 2012: Test Drive

7. On the Navigation Bar, click Orbit. Orbit the model to set the display approximately as shown.

9. To begin sketching the shape for a slot through the part: n

On the Home tab, Sketch panel, click 2-Point

Rectangle.

n

For the first corner, click on the previously selected face at location (1).

n

For the second corner, click a location outside the part as shown (2).

8. To look straight at one of the faces on the part: n

On the Navigation Bar, click Look At.

n

Select the face as shown.

n

The results of the Look At are shown at the bottom of the following illustration.

10. On the Sketch panel, click to expand the list for creating circles. Click 2-Point Circle.

11. In canvas, click the two endpoints of the rectangle to create the circle as shown. Press ESC to end the use of the tool.

Autodesk Inventor 2012: Test Drive 17

12. Set the viewing direction to preview the cut, on the View

Cube: n

Click the arrow to rotate the display counterclockwise.

n

Click the top right corner of the View Cube.

13. To begin extruding sketch areas to cut the part: n

On the Home tab, Solid panel, click Extrude.

n

Select the four sketch areas.

n

Click and drag the arrow manipulator back so the preview displays past the part.

15. On the Extrude tab, Extrude panel, click OK.

14. To set the depth of the cut to match the tangent face of the part, select the face as shown.

16. To begin adjusting the size of the rounded slot, in canvas: n

Select the arc face of the slot.

n

Click Press/Pull.

17. Drag the face to the required size. To do this, do the following:

18 Autodesk Inventor 2012: Test Drive

n

Click and drag the arrow manipulator, notice it increments every 2 mm.

n

In the Adaptive Snap Bar, Snap Value edit box, enter 1.

n

Drag the arrow handle again until it is at 5 mm.

18. To move the bottom of the slot: n

In canvas, right-click. Click Move.

n

Select the arc face of the slot.

n

Click and drag the triad origin sphere up the part.

n

Release the mouse button when the triad and feature is located as shown.

n

Right-click. Click OK.

20. Begin to add dimensions to the 3D part to constrain its size.

n

On the Home tab, Constraint & Dimension panel, click

Dimension.

n

Add dimensions to the outside of the part and slot as shown. Select the edges of the part along the straight edges where the 9.2681 dimension arrows point in the following illustration.

n

Right-click. Click OK.

19. On the View Cube, click Left. The part displays as shown.

21. To set the material thickness value: n

Double-click the dimension for the material thickness.

n

Press DELETE.

n

In the dimension field, enter the equation (25-10)/2.

Autodesk Inventor 2012: Test Drive 19

n

Click and drag the arrow manipulator so the preview extends past the part.

n

Click the face on the opposite side of the part.

n

Right-click. Click OK.

22. On the View Cube, click the upper right corner of the

Left view. The viewing direction displays as shown.

Note: The model dimensions were moved away from the part for clarity for your review.

25. Add another 8.5 mm hole that is located at the bend area of the part as shown.

23. To begin to add a hole concentric to the top rounded edge: n

In canvas, right-click. Click Hole.

n

Select the side face of the part.

n

Select the arc of the top rounded edge.

n

Click and drag the Hole Diameter

Manipulator until the diameter is 8.5 mm.

26. Save your changes to Claw.dwg. To do this, do the following: n

On the Quick Access toolbar, click Save.

n

In the Save As dialog box, click Save.

27. Close Claw.dwg.

Fusion Modifications in Inventor

In this section of the test drive, you use Change

Manager to apply the changes made in Inventor

Fusion to the Inventor part file.

1. Switch to Autodesk Inventor.

2. On the Quick Access toolbar, click Open.

3. Select and open Claw.dwg. Make sure you select the DWG file and not the IPT file. The changes you made were saved in the DWG file.

24. For the depth of the hole:

20 Autodesk Inventor 2012: Test Drive

4. In the Change Manager palette, select each listed entry to have a preview of the change display in canvas.

5. In the Change Manager palette, Pending Changes tab, click Apply All.

6. On the Fusion Change Manager tab, Exit panel, click

Finish Change Manager.

7. In the browser, right-click Surface2. Click Visibility.

8. Save Claw.ipt.

Autodesk Inventor 2012: Test Drive 21

Exercise: Assembly Modeling

In this part of the test drive, you place and constrain components in the assembly. You use an Inventor® part and complete the mechanism by adapting the length of a link rod to match your design criteria.

Finally, you drive an assembly constraint to examine the mechanism movement.

The completed exercise

Add and Position Parts in an Assembly

In this section of the test drive, you add the claw and lift ring parts to the assembly and add assembly constraints to position the parts.

1. Activate the lift assembly by selecting the

Lift_Assy.iam tab at the bottom of the canvas.

n

In canvas, right-click. On the marking menu, click Place

Component.

n

In the Place Component dialog box, double-click

Claw.ipt.

3. In canvas, click once near the end of the arm on the right side of the assembly. This adds one occurrence of the part.

4. To begin to assemble the placed part without ending the current tool or starting a new tool, click the inside face of the claw as shown. Tip: Zoom in on the claw part and the end of the adjacent arm.

2. To begin placing the claw part in to the assembly:

22 Autodesk Inventor 2012: Test Drive

Note: You use assembly constraints to position and orient components in the assembly. An unconstrained component has three translational and three rotational degrees of freedom. Assembly constraints remove degrees of freedom and enable the component to be assembled according to design criteria.

5. Position the cursor over the top face of the Spyder Arm as shown.

8. To select the axis of the hole in the claw: n

Position the cursor over the cylindrical wall of the hole in the claw.

n

In the Select Other list, select the axis as shown.

6. To select the opposite face of the SpyderArm, after the

Select Other list displays, select 2. Face Normal from the list.

9. To specify what the axis on the claw constrains to: n

Position the cursor over the hole in the arm.

n

Click the hole when the axis preview displays.

7. Click Apply. If the Apply button is not displayed, move the cursor close to the mini-toolbar.

10. Complete the process of adding and constraining the claw part by doing the following: n

Click OK.

Autodesk Inventor 2012: Test Drive 23

n

Right-click. Click Done.

n

Click OK.

11. In Autodesk Inventor, you can drag components while respecting all assembly constraints. This is a good technique to determine the remaining degrees of freedom on the component. Click and drag the claw part. The only degree of freedom is rotation about the two axes you just constrained.

The engineer’s note you reviewed earlier has information on the initial angle of the arm relative to a vertical plane. There is no readily available vertical plane in the assembly that is aligned with the faces on the claw part.

Work features can also be created at the assembly level.

You create them in a similar fashion as part level work features, by selecting the appropriate geometry.

13. Review the results. The previous selections resulted in a work plane at an angle to the selected plane, through the selected axis. The work plane passes through the Z-axis and is at an angle of 30 degrees to the origin YZ plane.

More importantly, it is a plane we can use to place the angle constraint described in the note.

12. To add an assembly level work feature: n

On the Model tab, Work Features panel, click Plane.

n

In the browser, expand the Origin folder of the top level assembly.

n

Click YZ Plane.

n

Click Z Axis.

n

In the Angle edit box, enter 30.

24 Autodesk Inventor 2012: Test Drive

14. To begin to constrain the angle of the claw relative to the work plane: n

In canvas, right-click. On the marking menu, click

Constrain.

n

In the Place Constraint dialog box, Type area, click

Angle.

n

In the Solution area, click Directed Angle.

15. To place the constraint: n

Select the newly created work plane.

n

Select the outside face of the claw.

n

In the Place Constraint dialog box, Angle field, enter

20.

n

With the preview displaying as shown, click n

OK to complete the constraint.

17. Start the Place Component tool again. Place a single occurrence of the LiftRing.ipt part near the top of the assembly as shown.

16. To turn off the visibility of the work plane, in the browser, right-click Work Plane1. Click Visibility (clear the check mark).

18. To constrain LiftRing: n

Position the cursor over the base of LiftRing as shown (1).

n

Click when the circle and arrow are displayed.

n

Position the cursor over the top of the cylinder (2).

n

Click when the arrow displays.

n

On the mini-toolbar, click OK.

n

Right-click. Click Done.

Autodesk Inventor 2012: Test Drive 25

n

Click OK.

19. The lift ring part is constrained to the assembly. Click and drag the lift ring to the right or left. Notice that it can rotate but it cannot move left or right. It can only move up and down, which also moves the parts it is constrained to.

22. To return to the Home view, on the ViewCube, click Home.

23. To add a pivot part to the assembly: n

Using Place Component, place the Pivot.ipt in the assembly near the raised support on the arm.

n

Right-click. Click Done.

20. Rotate your view so the bottom of the fixture is visible.

21. To set the position of the sleeve on the post: n

On the Assemble tab, Position panel, click Assemble.

n

Click the planar face on the underside of the sleeve (1).

n

Click the face on the bottom of the post (2).

n

On the mini-toolbar, for offset distance, enter 57.

24. To begin to constrain the pivot: n

In canvas, right-click. On the marking menu, click

Constrain.

n

In the Place Constraint dialog box, under Type, click

Insert.

26 Autodesk Inventor 2012: Test Drive

25. To assign an Insert constraint: n

In canvas, select the circular edge of the middle hole on the inside surface of the pivot (1).

n

Select the edge of the hole on the Spyder Arm (2).

n

In the Place Constraint dialog box, click OK.

26. Drag the pivot so it is more closely aligned to the rod end attached to the sleeve.

28. The components are constrained.

27. To add a mate constraint to the Pivot and rod end: n

Start the Constrain tool.

n

Select the axis of the Pivot (1) as shown.

n

Select the axis of the rod end (2).

n

Click OK.

29. Save the file.

Autodesk Inventor 2012: Test Drive 27

Assemble Parts to Create a Subassembly

Next you assemble the link rod and two rod ends to create a subassembly. It is good practice to build subassemblies to match the subassemblies found in the physical model.

1. To start a new file: n

On the Quick Access bar, click New.

n

On the Metric tab, double-click the

Standard (mm).iam template.

2. To save the file: n n n

On the Quick Access toolbar, click Save.

For name, enter: Adjust_Rod.

Click Save.

3. To place components in the assembly: n

In canvas, right-click. Click Place Component.

n

In the Subassemblies folder, select RodEnd.iam.

n

Click Open. An occurrence of the rod end assembly is aligned to, and grounded at the coordinate system origin.

n

Click to the right of the grounded occurrence to place a second occurrence.

n

Right-click. Click Done.

5. It can be helpful to preposition components prior to adding assembly constraints. To rotate a component in canvas: n

Select the second rod end that you added to the assembly.

n

In canvas, right-click. Click Rotate Component.

n

Click and drag inside the circle to reorient the rod end roughly as shown.

n

Right-click. Click Done.

4. To place the link rod created at the beginning of the test drive: n

Start the Place Component tool.

n

In the Place Component dialog box, shortcut list, click

Workspace.

n

Select LinkRod.ipt.

n

Click Open.

n

Click in canvas to place an occurrence of the link rod.

n

Right-click. Click Done.

6. To constrain the link rod to the two rod ends: n

In canvas, right-click. Click Constraint.

n

In the Place Constraint dialog box, under Type, click

Insert.

n

Select a circular edge on the link rod.

n

Select the circular edge of a rod end jam nut (2) as shown.

n

Click Apply.

28 Autodesk Inventor 2012: Test Drive

7. To add another insert constraint: n

Select the circular edge on the other end of the link rod (1).

n

Select the circular edge of the other jam nut (2) as shown in the following illustration.

n

Click OK.

11. To constrain the link rod assembly to the claw: n

In canvas, right-click. Click Constraint.

n

Under Type, click Insert.

n

Select the circular edge of a hole on the rod end (1).

n

Select the edge of a hole on the slot in the claw (2).

n

Click OK.

8. To complete the assembly: n

On the Quick Access toolbar, click Save.

n

Close the Adjust_Rod assembly. If prompted, save changes.

n

Close the LinkRod part. Save changes.

n

Close the Claw part. Save changes.

9. Verify that Lift_Assy.iam is the only open file.

10. To place the link rod assembly: n

Start the Place Component tool.

n

Double-click Adjust_Rod.iam.

n

Click in canvas to place an occurrence of the

AdjustRod assembly.

n

Right-click. Click Done.

12. Drag the free end of the rod assembly to match the following illustration.

Autodesk Inventor 2012: Test Drive 29

13. In the browser, double-click Adjust_Rod:1. All components other than the adjustor subassembly are dimmed in canvas and grayed out in the browser. You are now editing the subassembly in-place in the top-level assembly.

15. To return to the Adjust_Rod subassembly, on the Model tab, Return panel, click Return.

16. In the browser, right-click LinkRod:1 and click Adaptive.

The part is now adaptive within the subassembly. The length of the extrusion can change to match assembly constraints.

14. To activate the adaptivity of the link rod to enable it to change length and connect to the pivot: n

In the browser, double-click LinkRod:1. The part is now available to be edited in-place.

n

Ensure that Extrusion1 has the adaptive symbol next to it.

n

If Extrusion1 is not marked as adaptive, right-click it and click Adaptive.

17. To return to the Lift_Assy assembly, on the Return panel, click Return.

18. In the browser, right-click Adjust_Rod:1. Click Adaptive.

By setting the subassembly adaptive, the adaptive features in the subassembly components can respond to assembly constraints placed at the top-level assembly.

30 Autodesk Inventor 2012: Test Drive

19. To adapt the length of the rod: n

Start the Constraint tool.

n

Select the axis (not the circular edge center point) through the free rod end (1).

n

Select the axis through the open hole in the pivot part

(2).

n

Notice that the preview of the LinkRod shows that its length has adapted to fulfill the axis/axis constraint.

n

Click OK.

Note: If the assembly flips to an unusable position, click Undo on the Quick Access Bar.

21. Now that the mechanism is complete, you check the closed state of the assembly against the desired angle

(~16.4): n

In the browser, under Sleeve:1, rightclick Flush2

(57.000 mm). Click Suppress. This removes the suppressed state of the constraint.

n

Click in the background of the browser, and then click the same constraint.

n

In the value field at the bottom of the browser, enter

81. Make sure you press ENTER after entering the value. The position of the lift is now in the closed position.

The rod ends in the subassembly retain their

relationships to the link rod part.

20. To perform a constrained drag: n

In the browser under Sleeve:1, right-click Flush2

(57.000 mm). Click Suppress.

n

In the browser under Claw:1, right-click Angle3

(20.00 deg). Click Suppress.

n

In canvas, click and drag the sleeve, pivot, or claw.

The mechanism operates while satisfying all

placed assembly constraints.

22. In the browser, right-click Work Plane1. Click Visibility.

The work plane is now visible.

23. To access the measure angle tool, In canvas, right-click.

On the shortcut menu, click Measure > Measure Angle.

Autodesk Inventor 2012: Test Drive 31

27. In canvas, double-click the Pivot part. The pivot is isolated in the assembly, and the part environment is activated.

24. To measure the current angle between the claw and the work plane: n

In canvas, select the work plane.

n

Select the back face of the claw.

n

In the Measure Angle dialog box, review the value.

The angle reported is not within the acceptable range from the engineer’s note reviewed earlier in the test drive.

28. To access the initial sketch, in the browser under Pivot:1, right-click Extrusion1. Click Edit Sketch.

Note: Because we did not set an exact position for the pivot hole in the claw part, your angle value will be different.

25. Right-click in canvas. Click Done. After careful consideration you determine that if the pivot arms are shortened, the claw rotates further for the same movement of the sleeve. However, the 20 initial angle must be retained, so an iterative solution seems in order.

26. Next, you reset the constraints to their initial conditions so that all modifications to the pivot are made at this lift position.

n

In the browser, under Sleeve:1, click Flush2 (81.000 mm).

n

Enter 57 as the new offset.

n

Under Claw, unsuppress the Angle (20 deg) constraint.

29. To modify the part and create an equation between dimensions: n

Double-click the 40 mm vertical dimension.

n

Ensure that all the text in the dimension edit box is selected.

n

Select the horizontal 40 mm dimension.

n

In the Edit Dimension dialog box, click the green check mark.

The 40 mm dimension is replaced with the

name of the selected dimension (d3). The vertical dimension (d2) will now update to

32 Autodesk Inventor 2012: Test Drive

match any change in the horizontal dimension (d3=d2). 32. Begin to apply a constraint override for this positional representation by doing the following: n

In the browser under Claw:1, right-click Angle:3 (20.00 deg). Click Override.

n

In the Override Object dialog box, Constraint tab, select the Suppression check box.

n

From the list, select Suppress.

n

Click OK.

30. Next, you edit the horizontal arm length dimension to change the size of the pivot. To edit the arm length: n

Double-click the 40 mm horizontal dimension.

n

Enter 39 mm. Click the green checkmark.

n

Click in canvas to clear the selection.

n

Right-click. Click Finish 2D Sketch.

n

Right-click. Click Finish Edit.

Both 40 mm dimensions update to 39 mm.

The sketch and part update, and the assembly environment is reactivated. The length of the

LinkRod part adapts to meet the new length of the pivot arm.

31. To check the angle in the lift closed position, you could suppress the claw angle constraint, and then edit the sleeve offset to the closed position. Since you may need to repeat this process to arrive at a solution, you set up a positional representation of the lift in the closed position.

In the browser: n

Under Lift_Assy.iam, expand Representations.

n

Right-click Position. Click New.

n

Expand the Position: Position1 node.

n

Click the Position1 node, and then slowly click it again.

n

To rename the node, enter: Closed.

33. Place an additional constraint override for the positional representation. To do this, do the following: n

In the browser under Sleeve:1, right-click Flush:2 (57.00 mm). Click Override.

n

In the Override Object dialog box, Constraint tab, select the Value check box.

n

In the value field, enter 81 mm.

n

Click OK.

34. The assembly updates to match the overridden constraints.

Autodesk Inventor 2012: Test Drive 33

35. On the Quick Access toolbar, Distance flyout menu, click

Angle.

36. To check the results of the pivot edit: n

In canvas, select the back face on the claw.

n

In canvas or in the browser, select Work Plane 1.

n

In the Measure Angle dialog box, review the value.

n

Right-click. Click Done.

37. In the browser, under Representations, double-click

Master.

The assembly returns to the open position and the claw angle is again fixed at 20.

Note: Modeling operations can only be performed when the Master positional representation is active.

38. To edit the pivot part: n

Double-click the Pivot part to edit it inplace.

n

Edit the sketch under Extrusion1.

n

Edit the 39 mm horizontal dimension and enter 38 mm as the new value.

n

Right-click. Click Finish 2D Sketch.

n

Right-click. Click Finish Edit.

39. To check the results of the pivot edit: n

In the browser, under Representations, double-click

Closed.

n

Click in canvas to clear any selections.

n

Start the Measure Angle tool.

n

Select the outside face of the Claw.

n

Select Work Plane1.

n

In the Measure Angle dialog box, review the value.

n

Right-click. Click Done.

40. In the browser, under Representations, double-click

Master.

41. Save the file.

Place Bolted Connections

Next, you will place bolted connections into the assembly.

1. Before continuing, clean up some details after the link rod modeling session, in the browser: n

Under Claw:1, suppress Angle:3 (20.00 deg).

n

Right-click Adjust_Rod:1. Click Adaptive. The adaptive setting for the subassembly is now off.

n

Right-click Work Plane1. Click Visibility. The work plane is now hidden.

Note: You just turned off adaptivity at the assembly level after completing the adaptive modeling changes.

You can easily toggle adaptivity on if further design changes are required.

2. On the Design tab, Fasten panel, click Bolted Connection.

34 Autodesk Inventor 2012: Test Drive

3. In the Bolted Connection Component Generator dialog box: n

In the Placement list, select Concentric.

n

For Start Plane, select the flat face of the Pivot (1).

n

For the circular reference, select a circular edge from a hole in the Pivot (2).

n

Select the back face of the Pivot for the termination plane (3). Note: Autodesk Inventor understand that the termination plane will be parallel to the start plane. Therefore, the termination plane can be selected without rotating the model or using the

Select Other tool.

5. To add fasteners to the termination side of the fastener assembly: n

Below the two line divider, click the bar titled Click to

Add a Fastener.

n

Select ISO 7092.

n

Below the second washer, click the bar titled Click to

Add a Fastener.

n

Select ISO 4032. The results display as shown.

4. To add fasteners to be placed into the assembly, in the

Bolted Connection Component Generator dialog box: n

Click the bar titled Click to Add a Fastener.

n

In the Category list, select Socket Head Bolts.

n

Select ISO 4762.

n

Click the bar titled Click to Add a Fastener just below the ISO fastener in the list.

n

Select ISO 7092. The results displays as shown.

6. This bolted connection will be reused, so a template will be created that can be leveraged. To create a template: n

Expand the Bolted Connection Component Generator dialog box (1).

n

Click Add (2).

n

Enter Inventor Test Drive in the Template Description dialog box to add it to the template library (3).

n

Click OK in the Template Description dialog box.

n

Click OK in the Bolted Connection Component

Generator dialog box (4).

n

In the File Naming dialog box, click OK .

Autodesk Inventor 2012: Test Drive 35

7. To add another bolted connection: n

On the Design tab, Fasten panel, click Bolted

Connection.

n

Under Placement, select Concentric from the list.

n

For Start Plane, select the flat face of the Pivot for the start plane (1).

n

Select a circular edge from a hole in the Pivot for the circular reference (2).

n

Select the back face of the Pivot for the termination plane (3).

n

In the Templates Library list, select Inventor Test

Drive.

n

Click Set.

n

Click OK.

n

In the File Naming dialog box, click OK.

9. Save the file.

8. Repeat the previous process to place fasteners in the three remaining locations.

Use a Library of Standard Components

Autodesk Inventor includes a comprehensive library of standard components that can be used. The subassembly CommonFasteners.iam that was created with the Bolted Connection tool consists of a number of components from the content library.

1. On the Assemble tab, Component panel, click Place from

Content Center.

Note: You may need to select the down arrow next to the

Place tool to access Place from Content Center.

2. To select a fastener, in the Place from Content Center dialog box, under Category View: n

Expand Fasteners.

n

Expand Bolts.

36 Autodesk Inventor 2012: Test Drive

n

Select Socket Head.

n

Position the cursor over a hole in the bracket top component.

n

Click once when the green check mark is displayed and the tooltip displays the size of the component.

7. In canvas: n

Click and drag the red arrow handle (1) until the tootip displays a component length of 20 (2).

n

In the AutoDrop dialog box, click Apply (3).

3. Double-click Forged Socket Head Cap Screw- Metric in the preview pane of the Content Center.

4. The Content Center is made up of parts that will automatically size when positioned on holes in your design. When a specific size has not been calculated, the fastener is attached to your cursor and displays an icon with a red question mark.

8. The component is placed in the assembly and because it was a patterned hole, a fastener is placed in both occurrences of the patterned feature.

5. Position the cursor (do not click) over a hole on one of the sleeve boss components.

A green checkmark is added to the icon next to the component and the tooltip displays the fastener size based on the hole size.

6. To place the component in the assembly:

9. To begin to place a third occurrence of the fastener: n

In canvas, right-click and select Change Size in an open area.

n

In the Forged Socket Head Cap Screw - Metric dialog box, Thread Description list, select M6.

n

In the Nominal Length list, select 25.

n

Click OK.

Autodesk Inventor 2012: Test Drive 37

10. Place an occurrence of the bolt. Do the following: n

Click near the bottom of the lift assembly.

n

In canvas, right-click. Click Done.

Note: The initial selection determines the type of constraint that will be placed. The default assembly constraint while dragging a circular edge is Insert. If your initial selection is the cylindrical surface of the fastener, the default constraint type is Tangent. Press the I key to change to an Insert constraint.

13. To apply the constraint: n

Drag over the hole in the spyder arm and post.

n

Release the mouse button when the hole edge is highlighted.

The third fastener is constrained to the underside of the post.

11. You can place assembly constraints without using the

Place Constraint dialog box. You use ALT+Drag to place assembly constraints using part geometry and iMate symbols (iMates are not covered in this test drive). Orient your view so you can see the bottom of the sleeve as shown in the following illustration.

14. To change the color of the fastener in the assembly: n

In the browser, select the first Forged Socket Head

Cap Screw.

n

Hold down the SHIFT key and select the last Forged

Socket Head Cap Screw. All three occurrences of the fastener are selected.

n

On the Quick Access toolbar, Color Override list, select Gunmetal.

n

Click in canvas to clear the selection.

12. To constrain a component using the ALT+Drag method: n

Hold down the ALT key and click and drag on the circular edge under the head of the socket head cap screw.

38 Autodesk Inventor 2012: Test Drive

15. Optionally, use the previous process to change the color of the components that were placed using the Bolted

Connection tool.

Tip: You can use the CTRL key to select multiple components in the browser or graphics window and then select a material using the Color

Override list to change the color of multiple components at one time.

Create an Assembly Pattern and Simulate the Mechanism

To complete the assembly, you create a pattern of assembly components based on the pattern of arms on the spyder.

1. To select components to pattern, in the browser: n

Click LinkAdjust:1.

n

Hold down the SHIFT key and then click the last component in the browser. All components between

LinkAdjust and the last component in the browser are selected.

n

Hold down the CTRL key and select LiftRing:1 to remove it from the selection.

n

Hold down the CTRL key and select Work Plane1 to remove it from the selection.

16. Save the file.

2. To complete the pattern: n

On the Assemble tab, Component panel, click Pattern.

n

In the Pattern Component dialog box, Feature Pattern

Select area, click the Associated Feature Pattern select button.

n

Position the cursor over the bottom of the center post.

Click when the pattern of slots is highlighted.

3. Click OK to create the component pattern.

Autodesk Inventor 2012: Test Drive 39

4. Finally, you drive one of the assembly constraints to view a simulation of the lifting mechanism.

To access the Drive Constraint dialog box: n

In the browser, expand Sleeve:1.

n

Right-click Flush2 (57.000 mm). Click Drive Constraint.

5. To set the Drive Constraint parameters: n

For End, enter 81 mm.

n

Click the More (>>) button to expand the dialog box.

n

For the Increment value, enter .25.

n

In the Repetitions area, click Start/End/ Start.

n

For the Repetition value, enter 6.

6. To complete the drive constraint: n

Click the Less (<<) button to reduce the dialog box size.

n

Click the Forward button. The mechanism moves through its range three times.

7. In the Drive Constraint dialog box, click Cancel.

8. Save the file.

40 Autodesk Inventor 2012: Test Drive

Exercise: Advanced Visualization

Now that you have finished the assembly, you can create a near photo-realistic rendering. Autodesk Inventor provides state-of-the-art tools that design engineers need to quickly create renderings.

2. On the View tab, Appearance panel, Visual Style list, select Monochrome.

The completed exercise

Create a Photo-Realistic Rendering

1. Continue working with Lift_Assy.iam that you saved in the Assembly Modeling exercise. If you did not complete that exercise or save that file, open .\Completed Files\

Lift_Assy _.iam.

3. In the Visual Style list, select Watercolor.

Autodesk Inventor 2012: Test Drive 41

4. Orbit the model to view it from a direction approximately as shown. Notice how the visual style is dynamic as you orbit the model.

8. On the Appearance panel, click Ground Plane. The display of the ground plane is now toggled off.

5. In the Visual Style list, select Shaded.

9. Begin to add one shadow setting at a time and review their impact. On the Appearance panel, Shadows list, select the Ground Shadows check box.

6. On the Appearance panel, click Ground Plane. Notice how the opposite edges of the ground plane display parallel to each other.

10. In the Shadows list, select the Object Shadows check box.

The model now displays as shown. The ground shadow continues to display and object shadows are cast as indicated.

7. On the Appearance pane, Orthographic list, select

Perspective. Notice how the opposite edges of the ground plane appear to converge.

42 Autodesk Inventor 2012: Test Drive

11. In the Shadows list, select the Ambient Shadows check box. Notice the darkening of the display of the models in areas where ambient light would not be as bright.

Tip: Toggle this setting on and off to make it easier to see where the ambient shadows are being applied.

13. To have the digital prototype display even more realistic, in the Visual Style list, select Realistic. By default this style uses Ray Tracing to calculate the display for material, shadows, and lighting. Notice the shadow casting from one part to another is even more pronounced.

Note: The speed of calculation depends on your design and your computer. The quality of the material is impacted by the material settings and lighting style.

12. On the Appearance panel, click Reflections. A reflection of the design appears reflected off the ground plane.

14. To continue to use the Realistic visual style but without

Ray Tracing, on the Appearance panel, click Ray Tracing.

Autodesk Inventor 2012: Test Drive 43

15. To export the current rendering display of the design to a neutral image file: n

On the Application menu, Export fly out, click Image.

n

In the Save Copy As dialog box, Save As Type list, select PNG Files (*.png).

n

Review the file name and location where the file will be saved.

n

Click Save.

Tip: In Application Options toggle off the display of the

Origin 3D Indicator so it does not display in the exported

image.

16. To view the design with a different lighting style, on the

Appearance panel, lighting style list, select Empty Lab.

18. Save and close the assembly file.

17. Zoom out and orbit the display to review the 3D environment around the digital prototype and the light source for lighting the design.

44 Autodesk Inventor 2012: Test Drive

Exercise: Drawings

In this part of the test drive you review the styles associated with a drawing, and add new text and dimension styles to your drawing. You then add drawing views of a subassembly and one of the parts. Finally, you annotate the views to document your design.

n

On the Manage tab, Styles and Standards panel, click

Styles Editor.

The default Drafting Standard style is ANSI (mm).

Think of this as the top-level style in a hierarchy.

The other styles such as text and dimension styles are child styles of the Standard style. Styles control text and dimension settings, in a similar fashion to

AutoCAD® styles.

4. In the Style and Standard Editor dialog box: n

In the styles list, expand Text.

n

Click Note Text (ANSI).

The completed exercise

Create a New Drawing and Define Styles

Next, you create a new drawing and review the styles that control the appearance of drawing annotations.

You add a new text style and dimension style to the drawing.

1. To start a new file: n

On the Quick Access bar, click New.

n

On the Metric tab, double-click the ANSI (mm).dwg template.

2. To save the file: n

On the Quick Access toolbar, click Save.

n

Enter a name of Adjust_Assy.

n

Click Save.

3. Styles control the appearance of annotations in the drawing. Styles are stored in external libraries to enable sharing of standards on a project or company basis. Style setup and management is beyond the scope of this test drive but you will add new styles to the current drawing.

These new styles could then be exported to a library where other users could import and use them in their drawings.

5. The settings for this style are displayed in the Editor.

Autodesk Inventor 2012: Test Drive 45

n

Click New.

n

In the New Local Style dialog box, for Name, enter Test

Drive Dimensions.

n

Click OK.

6. To create a new text style: n

At the top of the Style and Standard Editor dialog box, click New.

n

In the New Local Style dialog box, Name field, enter

Test Drive Text.

n

Click OK.

9. To set Test Drive Text as the primary text style for this new dimension style: n

In the styles list, verify that Test Drive Dimensions is selected.

n

In the Dimension Style area, click the Text tab.

n

In the Primary Text Style list, select Test Drive Text.

7. The new text style is created, selected, and added to the list of styles. To edit the values for the new text style: n

In the Character Formatting area, Font list, select

Verdana.

n

For Text Height, enter 4 mm.

n

Click Bold.

n

Click Save.

10. To set the text orientation, on the Text tab, in the

Orientation area under Linear: n

In the Aligned dimension list, select Inline - Horizontal.

n

In the Vertical dimension list, select Inline - Horizontal.

8. Each Standard Style includes pre-defined dimension styles. These styles can be edited or used as a foundation for creating new dimension styles.

To add a dimension style: n

In the styles list, expand Dimension.

n

Click Default - mm (ANSI).

11. To control dimension and extension line settings: n

Click the Display tab.

n

For D:Spacing, enter 9.00 mm.

n

For E:Part Offset, enter 12.00 mm.

46 Autodesk Inventor 2012: Test Drive

12. To modify the units: n

Click the Units tab.

n

In the Linear area, Precision list, select 1.1.

n

Click Save.

15. Continue to assign styles to the object default style: n

Select Test Drive Dimensions as the default n

Object Style for: o

Diameter Dimensions o

Hole Note o

Linear Dimensions o

Radial Dimensions.

n

Click Save.

13. Examine the information on the other tabs. The Notes and Leaders tab provides tools to create custom hole notes. Hole parameters from the model are included in the hole note, providing an associative link between the model and the drawing hole note.

14. Styles are mapped to annotations through the Object

Defaults style. Next, you change the default style for linear, radial, diameter, and angle dimensions for the new dimension style.

n

In the styles list, expand Object Defaults.

n

Click Object Defaults (ANSI-mm).

n

Under Object Defaults Style, for Filter, select

Dimension Objects.

n

For Angle Dimension, in the Object Style column, select Test Drive Dimensions.

16. To edit Layer settings: n

In the Styles List, expand Layers.

n

Click any Layer in the list.

n

For Centerline, click the color swatch in the Color

Column.

n

In the Color dialog box, click Orange.

n

Click OK.

Autodesk Inventor 2012: Test Drive 47

17. Repeat for the following layers: n

For Center Mark, click Orange.

n

For Dimension, select one of the dark Green.

n

For Hidden, click Blue.

n

For Hidden Narrow, click Blue.

n

Click Save.

n

Click Done.

19. To select a file: n

To the right of the File list, click Open an Existing File.

n

In the Open dialog box, double-click LinkAdjust_For_

Drawing.ipn.

20. To place the exploded view on the drawing sheet: n

In the Drawing View dialog box, View/Scale Label area, in the Scale list, select 2:1.

n

In the Orientation list, select Iso Top Right.

n

Click on the sheet to place the drawing view of the exploded assembly.

n

Right-click. Click Done.

21. On the Annotate tab, Table panel, click Parts List.

18. Next, you place an exploded view from a presentation file. You then create a parts list based on this view, and balloon the components in the view.

n

In canvas, right-click. On the marking menu, click Base

View.

22. To create a parts list based on the exploded assembly view: n

Click inside the exploded view boundary.

n

In the Parts List dialog box, in the BOM n

Settings and Properties area, Level list, select All

Levels.

n

Click OK.

48 Autodesk Inventor 2012: Test Drive

n

Click the top right corner of the drawing sheet border to place the default parts list.

n

In the Parts List dialog box, right-click the Part

Number column header.

n

Click Column Width.

n

For Column Width, enter 45. Click OK.

n

Change the width of the Description column to 60.

n

Change the width of the Vendor column to 45.

23. In the browser or canvas, right-click the Parts List. Click

Edit Parts List.

From the Parts List dialog box, you can: n

Add and remove columns that link to model property values.

n

Expand and contract subassemblies to display a hierarchical parts list.

n

Sort the parts list by column.

n

Add user-defined custom rows for assembly components such as fluids.

n

Modify the layout of columns in the parts list.

n

Format column values.

26. To edit the justification of the values in a column: n

Right-click the Item column header. Click Format

Column.

n

In the Format column dialog box, in the Justification area, for Value, click Align Left.

n

Click OK.

27. To display subassembly hierarchies, click the plus signs in the far left of each of the two rows representing the

MaleEnd and FemaleEnd subassemblies.

24. To add another column to the parts list: n

In the Parts List dialog box, click the Column Chooser tool.

n

In the Parts List Column Chooser dialog box, under

Available Properties, select Vendor.

n

Click Add.

n

Click OK.

Note: The entries in each column reflect the current value of the associated model property. You can override any cell with black text. Cells with red text cannot be changed.

25. To edit the width of the columns:

28. To update the Parts List in the drawing, click OK.

29. To add rows to the parts list to account for non-modeled components: n

Edit the parts list.

Autodesk Inventor 2012: Test Drive 49

n

Right-click the row header (arrow) next to the last item in the parts list. Click Insert Custom Part.

n

For QTY, enter 0.1 ml.

n

In the Part Number cell for the new item 4, enter Anti-

Seize.

n

In the Description cell, enter XT Slick .

n

Click OK.

30. To complete the assembly drawing, you add balloons corresponding to the item numbers in the parts list.

Autodesk Inventor includes both a single balloon tool, and an Auto Balloon tool to generate balloons for each component in the assembly with a matching visible line in the parts list.

n

On the Annotate tab, Table panel, click Auto Balloon.

Note: The Auto Balloon tool is accessed by clicking the arrow below the Balloon tool.

32. In the Auto Balloon dialog box: n

In the Placement area, click Horizontal.

n

For Offset Spacing, enter 30.00 mm.

n

Click Select Placement.

n

Click above the drawing view to preview the balloon placement.

n

Click OK.

31. To select components to balloon: n

Click inside the exploded drawing view.

n

Drag a window around all the parts in the drawing view.

33. Drag the balloon arrows to more appropriate edges on the parts.

34. To add a balloon for the anti-seize compound: n

Right-click the balloon for the JamNut. Click Attach

Balloon from List.

n

Select the check box for the Item 4 Anti- Seize custom part.

n

Click OK.

50 Autodesk Inventor 2012: Test Drive

n

Without clicking, move the cursor around the existing balloon until the new balloon is previewed at the 3 o’clock position next to the existing balloon.

n

Click to place the custom part balloon.

A blank sheet is created with the same sheet size, border, and title block as the first sheet. When creating a new sheet, it automatically becomes the active sheet.

Tip: Double-click a sheet in the browser to activate it.

2. To select a source part for a drawing view: n

On the Place Views tab, Create panel, click Base.

n

To the right of the File list, click Open an Existing File.

n

In the Open dialog box, For Files of type: select

Inventor Files (*.ipt; *.iam; *.ipn).

n

Navigate to the ...\Workspace\Parts folder and select

Post.ipt.

n

Click Open.

35. The default title block on the sheet contains placeholders for properties associated with the drawing. You can modify the standard title blocks or create your own from scratch. You can add placeholders for model properties in place of, or in addition to the referenced drawing properties.

n

At the top of the browser, right-click Adjust_Assy.

Click iProperties.

n

On the Summary tab, in the Title field, enter Adjustor

Assembly.

n

Click OK.

The title block reflects the change.

36. Save the file.

Create Views on Multiple Sheets

You can create separate drawing files for each assembly component, or add additional sheets to the existing drawing, and detail components within the same drawing document.

1. To create a blank sheet: n

Right-click in the background of the browser.

n

Click New Sheet.

3. To place a base view of a part: n

In the Scale list, select 1:1.

n in the Orientation list, select Bottom.

n

Click on the left side of the sheet to place the view.

Autodesk Inventor 2012: Test Drive 51

4. To add projected views from the base view: n

Move the cursor below the first view and click to place the view.

n

Move the cursor to the right and above the original view. An isometric projection of the original view is previewed.

n

Click to place the view.

n

Right-click. Click Create.

n

After the views are created, click the border of the isometric view and drag it to the topright corner of the sheet.

6. To modify the view scale: n

Right-click inside the projected view of the end of the post. Click Edit View.

n

In the View/Scale area, click Toggle Label Visibility (1).

n

Clear the Scale from Base check box (2).

n

In the Scale field, enter 2 (3).

n

In the View Identifier field, enter BOTTOM VIEW.

n

In the Style area, clear the Style from Base check box

(4).

n

Click Hidden Line Removed (5).

7. In the Drawing View dialog box, click OK.

5. You can specify that a view shows hidden lines, has hidden lines removed, or is a shaded view. To modify a view to be a shaded view: n

Right-click inside the isometric view border, but not on a line or other entity inside the view.

n

Click Edit View.

n

In the Style area, click Shaded (blue icon).

n

Click OK.

The isometric view changes to a shaded view of the post.

8. The center section of the post has no detail so you create a broken view to obtain some additional sheet real estate.

n

On the Place Views tab, Modify panel, click Break.

52 Autodesk Inventor 2012: Test Drive

9. To create the broken view: n

Click the base view (first created view) of the post.

n

Click just below the keyway in the base view.

n

Click just above the slots in the base view.

The view is changed to a broken view. You can edit the break through a context menu, or by dragging the break lines.

n

Position the cursor over the upper horizontal edge of the post in the base view. Pause when a green dot indicates the midpoint of the line. Do not click.

n

Move the cursor above the edge. A dotted line implies alignment with the edge midpoint.

n

When the cursor is positioned above the midpoint as shown, click to set the first point.

10. To obtain information on the key seat and mounting slot/ hole at the base of the post, you create a section view from the base view.

To access the Section View tool: n

Right-click in a blank area inside the base view.

n

On the marking menu, click Section View.

12. To continue placing the section view: n

Move the cursor below the part. Ensure that a perpendicular or parallel constraint symbol is visible.

This indicates the section line is vertical.

n

Click outside the bottom of the view.

11. To create the section view:

Autodesk Inventor 2012: Test Drive 53

13. To complete the section view: n

Right-click. Click Continue.

n

Move the cursor to the right. A projected view is previewed.

n

Click to place the section view.

14. Next, you create a detail view of the slot/hole in the section view.

n

Zoom in to the bottom of the section view.

17. A preview of the detail view is attached to the cursor. To place the detail view, click to the right of the section view to place the detail view.

18. Save the file.

15. Right-click in a blank area inside the section view. On the marking menu, click Detail View.

16. To create the detail view: n

Click near the intersection of the post centerline and a horizontal line approximately halfway along the length of the hole. This defines the center of the detail view circle.

n

Move the cursor outside the post, and click when the circle encompasses the lower portion of the post.

Add Annotations to the Drawing

Autodesk Inventor drawing annotations take advantage of the information contained in the model.

Dimensions, notes, centerlines, and so on are all associative to the model geometry. Changes to the model are automatically reflected in the drawing views and annotations. In this section of the test drive you add a variety of common drawing annotations to the drawing views.

1. You can place centerlines on arcs, circles and on cylinders shown in elevation. You use a number of different centerline annotation tools in the different views.

n

Zoom in on the end view of the post.

54 Autodesk Inventor 2012: Test Drive

2. To automatically place centerlines: n

Right-click the end view of the post. On the shortcut menu, click Automated Centerlines.

n

In the Automated Centerlines dialog box, Apply To area, verify that Hole Features (1), Cylindrical Features

(2), and Circular Patterned Features (3) are selected.

n

Click OK.

5. On the Annotate tab, Symbols panel, click Center Mark.

3. Drag the endpoints of the center mark on the large circle to match the following illustration.

6. To add center marks to individual arcs and circles: n

Right-click on the sheet. Click Extension Lines to clear the check mark. The placed center marks will be a single cross at the arc/circle center.

n

Click the arc at the top of the key seat.

n

Click the arc at the bottom of the key seat.

n

Right-click. Click Done.

4. To modify the display of the section line so it is less intrusive to the view: n

Zoom in on the base view.

n

Right-click the section line. Click Show Entire Line to clear the check mark.

7. To create a centerline on the section view of the cylinder, the Centerline Bisector tool is used.

n

Zoom in on the Detail B view.

Autodesk Inventor 2012: Test Drive 55

n

On the Annotate tab, Symbols panel, click Centerline

Bisector.

8. To place the centerline bisector: n

Click the vertical edge on the left side of the hole.

n

Click the vertical edge on the right side of the hole.

n

Right-click. Click Done.

n

If desired, drag the endpoints of the centerline past the extents of the hole.

10. To select specific model sketch dimensions: n

In the Retrieve Dimensions dialog box, click Select

Dimensions.

n

In canvas, select the broken 162.0 dimension.

n

Click OK.

9. You can import model sketch dimensions into drawing views and also add dimensions to the views with the drawing annotation tools. The placed dimensions are associative to the model. You can place baseline and ordinate dimensions in addition to using the general dimension tool. You can select a dimension style prior to placing dimensions, or change the dimension style of selected dimensions after creation.

To retrieve model sketch dimensions: n

Zoom in to the base view.

n

Right-click the base view. In the shortcut menu, click

Retrieve Dimensions.

n

In the Retrieve Dimensions dialog box, Select Source area, click Select Parts.

n

In canvas, select the model in the base view.

11. Click and drag the dimension until it is positioned with the centerline and the dimension displays as a dotted line. Note: The dotted lines indicate alignment with the centerline and the dimension offset you specified in the

Test Drive Dimensions dimension style.

56 Autodesk Inventor 2012: Test Drive

12. To activate the general dimension tool, in canvas, rightclick. In the marking menu, click General Dimension.

14. Zoom in on the end view of the post.

13. To place a dimension on the key seat and align it to the first dimension: n

Click the left edge of the key seat (click the line, not a vertex).

n

Rub the cursor over the first dimension (do not click) until a yellow dot is displayed.

n

Click to place the dimension text midway along the length of the key seat, and aligned with the first dimension. The yellow dot implies alignment with the

‘scrubbed’ dimension.

n

If the Edit Dimension dialog box displays, click OK.

n

Right-click. Click Done.

15. To add a diameter dimension you leverage the dimensions created during the modeling process, similar to placing the broken dimension on the base view: n

Right-click the view of the end of the post. On the shortcut menu, click Retrieve Dimensions.

n

In the Retrieve Dimensions dialog box, click Select

Parts.

n

Click the part in the drawing view of the post end.

A preview of all available dimensions is displayed.

Alternately, you could select specific features to preview available dimensions using the Select

Features option.

n

In the Retrieve Dimensions dialog box, click Select

Dimensions.

n

Select the diameter 25 dimension.

n

Click OK.

16. To dimension the bolt hole circle.

Autodesk Inventor 2012: Test Drive 57

n

Start the General Dimension tool.

n

Select the bolt hole circle.

n

Click to the upper left of the view to place the dimension.

n

If the Edit Dimension dialog box displays, click OK.

17. To add an angle dimension to the hole pattern: n

Select the centerline through the lower left hole.

n

Select the centerline through the lower right hole.

n

Move below the post and click to place the angular dimension.

n

If the Edit Dimension dialog box displays, click OK.

n

Right-click. Click Done.

n

Click and drag the view label to provide room for the dimension.

19. To place the hole note: n

Select the edge of the upper hole in the same view.

n

Click to place the hole note as shown.

n

Right-click. Click Done.

20. You can also edit individual dimensions and hole notes to add text or other information. To edit the hole note: n

Right-click the hole note text. Click Edit Hole Note.

n

In the Edit Hole Note dialog box, Options area, select the Tap Drill check box.

n

Click OK.

The hole note now shows the tap drill information.

18. The Hole and Thread Note tool captures data from the model. You can create custom hole note templates in a dimension style for drilled, tapped, counterbored and countersunk holes.

To access the Hole and Thread Note tool: n

Right-click in a blank area of the drawing. (Not in a view).

n

Click Hole/Thread Notes.

21. You can customize the text for any dimension or hole note. To edit the hole note text: n

Right-click the hole note text. Click Text.

58 Autodesk Inventor 2012: Test Drive

n

In the Format Text dialog box, Component list, select

Post.

n

In the Parameter list, select Hole_Count (3.00 ul). In the Precision list, select 0.

n

Click to position the cursor at the beginning of the hole note placeholder (1).

n

Click Add Parameter (2).

25. To modify a dimension: n

Right-click the 25.0 diameter dimension. On the shortcut menu, click Options > Single Dimension Line.

n

Drag the green dot at the horizontal jog of the dimension line to match the following illustration.

22. Between the 3 and the placeholder, enter X and a space.

26. To access the Datum Identifier Symbol tool: n

On the Annotate tab, Symbols panel, click the down arrow to scroll through symbols.

n

Click the Datum Identifier Symbol tool.

23. To complete the hole note, click OK The additional text is not aligned with the hole note.

24. To reposition the text on the sheet: n

Click on the hole note and drag it to the right. The text justifies to the left when placed on the other side of the leader.

27. To place the symbol: n

Click a point on the outer diameter of the post.

n

Move the cursor outside the post and click to define the leader endpoint.

n

Right-click. Click Continue.

n

In the Format Text dialog box, for the text, enter B.

n

Click OK.

n

Right-click. Click Done.

Autodesk Inventor 2012: Test Drive 59

28. Next, you add a feature control frame to the hole note.

n

On the Annotate tab, Symbols panel, click Feature

Control Frame.

32. Close all open files.

29. To place the feature control frame: n

Click a location below the hole note text.

n

Right-click. Click Continue.

n

In the Feature Control Frame dialog box, enter the information as shown in the following illustration. Use the GDT symbols displayed near the bottom of the dialog box.

30. To place the feature control frame: n

Click OK to place the feature control frame.

n

Right-click. Click Done.

31. To complete the drawing: n

On the Navigation Bar, click Zoom All.

n

Save the file.

60 Autodesk Inventor 2012: Test Drive

Exercise: Presentation Files

In this part of the test drive you create an exploded version of the assembly model using the Presentation tools in Autodesk Inventor. You will add tweaks to assembly components in order to create the exploded view, view animations of the component tweaks, and use the Sequence View to review tweak motion. n

Enter a name of LinkAdjust_Presentation.

n

Click Save.

5. In canvas, right-click . Click Create View.

The completed exercise

Create an Exploded Version of the Assembly

In this section of the test drive, you create a presentation file with components exploded from their assembled position.

1. Open LinkAdjust.iam.

6. In the Select Assembly dialog box: n

Verify that the LinkAdjust.iam file is selected.

n

Verify that Manual is selected.

n

Click OK.

Note: The LinkAdjust assembly file is automatically selected if it is the only open assembly file in Autodesk

Inventor. If it is not selected, click the Open an Existing

File button next to the File field and choose the file. The assembly view is placed in its assembled state in the presentation file.

2. Use the Orbit and Zoom tools to examine the assembly.

3. To start a new file: n

On the Quick Access toolbar, click New.

n

On the Metric tab, double-click the Standard (mm).ipn template.

7. To expand the display of the assembly components: n

Click the plus sign in front of Explosion1.

n

Click the plus sign in front of LinkAdjust.iam to expand its display.

4. To save the file: n

On the Quick Access toolbar, click Save.

Autodesk Inventor 2012: Test Drive 61

8. Next, you add tweaks to the presentation file that will move the assembled components into an unassembled state.

To access the Tweak Components tool: n

In canvas, right-click. Click Tweak Components.

Tip: You can select components in canvas or in the

browser.

11. To move (tweak) the selected components: n

Verify that the Z button is selected in the dialog box

(1).

n

In the Tweak Distance field, enter 10 (2).

n

Click Apply (3).

9. To specify the tweak direction, select the shaft of the

FemaleEnd subassembly where indicated in the following illustration. You know you selected the right geometry on the part when the triad displays as shown.

12. To create a rotation tweak with the selected components: n

Click the Rotation transformation type (1).

n

Enter -2880 in the Tweak Distance field (2).

n

Click Apply to create the tweak (3).

10. For the components to tweak, select the FemaleEnd and

HeimBall components.

Note: The components will not appear as though anything has changed. The -2880 degree increment rotates the components exactly eight times. Later in the test drive, you will group this tweak with the first one so that it appears that the female end is being rotated into place.

13. To add an additional tweak: n

Click the Translation transformation type (1).

n

In the Tweak Distance field, enter 35 (2).

62 Autodesk Inventor 2012: Test Drive

n

Click Apply (3).

n

Click Clear.

14. The position of the FemaleEnd subassembly should display as shown in the following illustration.

17. To apply a rotational tweak: n

Click the Rotation transformation type.

n

Enter -2880 in the Tweak Angle field.

n

Click Apply.

Note: The component will not look like it has changed.

18. To add an additional tweak: n

Click the Translation transformation type.

n

In the Tweak Distance field, enter 17.

n

Click Apply.

n

Click Clear.

The JamNut should be positioned approximately half-way

between the Male and Female End subassemblies.

15. To add tweaks to the JamNut component: n

In the Tweak Component dialog box, verify that

Direction is selected.

n

Select the shaft of the MaleEnd subassembly as shown.

16. To add a tweak: n

Select the JamNut component to select it.

n

Verify that the Z button is selected in the dialog box.

n

In the Tweak Distance field, enter 12.

n

Click Apply.

19. To add tweaks to the two Heim Ball components: n

In the Tweak Component dialog box, verify that

Direction is selected.

n

Position your cursor over the circular edge of the

HeimBall component in the MaleEnd subassembly until the temporary Z axis aligns with the axis of the component.

n

Click to accept the axis orientation.

n

Click the HeimBall component to select it.

n

Verify that the Z axis is selected.

Autodesk Inventor 2012: Test Drive 63

20. In addition to entering precise values in the Tweak

Distance edit box, you can also drag components in canvas to position them.

To tweak the HeimBall component: n

Click and drag the component in canvas to move the

HeimBall below the MaleEnd subassembly. The Tweak

Distance field should read approximately -25.

n

Click Apply.

n

Click Clear.

Tip: When selecting the direction vector or changing the vector that you want to move the component(s) along, you can select the X, Y, or

Z axis from either the Tweak Component dialog box or select the axis from the tri-pod in canvas.

22. In the Tweak Component dialog box: n

Click the HeimBall part to select it.

n

Verify that the Z axis is selected.

n

Click and drag the component in canvas to move the

HeimBall below the MaleEnd subassembly. The Tweak

Distance field should read approximately -25.

n

Click Apply to create the tweak.

n

Click Close.

Note: Once you have selected the component, to drag to location, the cursor does not need to be on the component.

21. To specify a direction for the next tweak: n

Verify that Direction is selected.

n

Position your cursor over the circular edge of the

HeimBall component in the FemaleEnd subassembly until the temporary Z axis aligns with the axis of the component, as shown in the following illustration.

n

Click to accept the axis orientation.

23. Click Save.

Animate and Edit Presentations

In this section of the test drive, you animate the presentation, modify how the parts animate, and create a neutral video file of the animation.

1. Next, you will view and modify the animation. In canvas, right-click. Click Animate.

2. To preview the animation:

64 Autodesk Inventor 2012: Test Drive

n

In the Animation dialog box, Parameters area, Interval field, enter 10.

n

Click Apply.

n

Click the Play Forward button and watch the animation.

n

Click Reset when the animation is finished.

Tip: The interval setting adjusts the number of steps that a component moves along a particular tweak. By specifying a lower number, the animation is played faster.

3. Notice that there are a few items in the animation that need to be changed to provide a better presentation.

To group tweaks together: n

In the Animation dialog box, click the More (>>).

n

Press CTRL and select Sequence numbers 4 and 5.

n

Click Group.

n

Click Apply.

Note: Verify that you select all four items labeled either 6 or

7 in the dialog box.

5. To play the animation: n

Click the more (<<) button to reduce the dialog box to its original size.

n

Click the Play Forward.

n

Click Cancel to close the Animation dialog box.

6. Next, you will modify some tweak values.

n

Expand FemaleEnd:1 and HeimBall12:1 in the browser.

Note: The hierarchy displays tweaks nested below each component definition and their associated values.

4. To group additional sequences: n

Repeat the step above to group Sequence numbers 6 and 7.

n

Click Apply in the Animation dialog box.

7. To modify the tweak value: n

In the browser, under HeimBall12:1, select the Tweak that is approximately 25 mm.

n

An offset field is displayed at the bottom of the browser. In the offset field, enter 40.

n

Press ENTER.

The HeimBall component moves to its new position.

Autodesk Inventor 2012: Test Drive 65

n

Click Create Task.

n

Repeat the process to create one more task in the browser.

8. To modify the tweak applied to the other HeimBall component: n

In canvas, click the trail that is associated with the vertical 25 mm tweak under HeimBall10:1.

n

Click and drag the green dot to move the HeimBall so that it is approximately double the original distance.

n

Click anywhere in canvas to deselect the trail.

12. To move sequences between tasks: n

Expand Task3 in the browser.

n

Select Sequence1.

n

Hold the CTRL key and select Sequence2.

n

Drag and drop them below Task1.

Tip: You can double-click a trail in canvas to access the Tweak

Component dialog box.

9. Save the Presentation.

10. To complete the animation, you will add specific viewing angles and descriptions to the animation using functionality within a Sequence View.

n

At the top of the browser, click the Browser Filters (1).

n

Select Sequence View from the menu. 13. Repeat the drag and drop process to move the following sequences to the appropriate task: n

Sequences 3 and 4 to Task2.

n

Sequences 5 and 6 should be in Task3.

Note: Adding tasks is not necessary, but is a way that you can organize your presentation into a specific set of assembly instructions.

14. To rename the tasks in the browser: n

Slowly double-click Task1 in the browser.

n

Rename it to Insert Heim Ball.

n

Rename Task2 to Attach Jam Nut.

n

Rename Task3 to Attach Female End.

The browser displays Tasks and Sequences for the tweaks that have been created.

11. To create additional tasks: n

In the browser, right-click Explosion1.

66 Autodesk Inventor 2012: Test Drive

15. To edit a task or sequence: n

In the browser, right-click Insert Heim Ball. Click Edit.

n

In the Edit Task & Sequences dialog box, under Tasks >

Description, enter Insert Heim Ball components.

n

Click Apply. n

From the Task list, select Attach Female End.

n

In the Task > Description field, enter Attach Female

End to Male End.

n

Click Apply.

n

Right-click in canvas. Click Home View.

n

Click Set Camera.

n

Click Apply.

n

Click OK.

19. Click the Save tool.

20. To animate the tweaks: n

In canvas, right click. Click Animate.

n

Click the Play Forward button and watch the animation.

n

Click Reset when the animation is finished.

Note: Notice the camera movements added to the presentation.

21. To create a WMV file from your presentation: n

Reduce the canvas to a size of your choice.

n

Click the Record button in the Animation dialog box.

16. You can specify specific camera angles to be set before a sequence is animated. With the Edit Task & Sequences dialog box still open, and Insert Heim Ball selected for the

Task and Sequence 1 selected from the Sequences list: n

In canvas, right-click. Click Home View.

n

In the Edit Task & Sequences dialog box, click Set

Camera.

n

Click Apply.

Note: This will specify that the presentation will begin from the Home View.

17. To add additional camera angles and task descriptions: n

Under Tasks, select Attach Jam Nut.

n

In the Task > Description field, enter Attach Jam Nut to

Male End.

n

In canvas, zoom in on the Jam Nut and Male End components.

n

In the Edit Task & Sequences dialog box, click Set

Camera.

n

Click Apply.

22. To save the animation: n

In the Save As dialog box, enter My_LinkAdjust_

Presentation.

n

For Save As Type, select WMV Files (*.wmv).

n

Click Save.

n

In the ASF Export Properties dialog box, Network

Bandwidth area, click n

BroadBand(250kbps) n

For Image Size, click Custom.

n

Click OK.

n

Click the Play Forward button.

n

Click Reset when the Animation is complete and the dialog box is displayed.

n

Click Cancel.

23. Save and close all files in Autodesk Inventor.

24. In Windows Explorer, navigate to the file location and double-click the created file to view the video.

18. To specify settings for the next task:

Autodesk Inventor 2012: Test Drive 67

Conclusion

We hope you have enjoyed your 3D design experience. This test drive only scratches the surface of the full capabilities of Autodesk® Inventor®.

The Autodesk Inventor product line provides a comprehensive and flexible set of software for 3D mechanical design, simulation, tooling creation, and design communication that helps you cost effectively take advantage of a digital prototyping workflow to design, visualize and simulate your products digitally before they are ever built. Inventor allows engineers to integrate AutoCAD drawings and 3D data into a single digital model creating a virtual representation of the final product.

Move beyond 3D and develop a complete digital prototype of your product with Inventor.

For more details, please visit us online at www.autodesk.com/inventor.

- The Autodesk Inventor Team

Autodesk supports products through Autodesk Authorized Resellers, industry experts who offer consultation, training, support, and other related services to help meet your business needs. We encourage you to contact an Autodesk Authorized Reseller or your local Autodesk representative to learn how Autodesk Manufacturing Solutions can help you get to market faster and at a lower cost.

To find an Authorized Autodesk Reseller in your area, call 800-964-6432 (United States and Canada only) or visit our website at www.autodesk.com/reseller.

68

3DEC (design/logo), 3December, 3December.com, 3ds Max, ADI, Algor, Alias, Alias (swirl design/logo),

AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD

Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Intent, Autodesk

Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner,

Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil 3D,

Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content

Explorer, Create>what’s>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer’s Toolkit,

DesignKids, DesignProf, DesignServer, DesignStudio, Design|Studio (design/logo), Design Web Format, Discreet, DWF, DWG,

DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face

Robot, FBX, Fempro, Filmbox, Fire, Flame, Flint, FMDesktop, Freewheel, Frost, GDX Driver, Gmax, Green Building Studio,

Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor LT,

Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, Lustre, MatchMover, Maya, Mechanical Desktop, Moldflow,

Moonbox, MotionBuilder, Movimento, MPA, MPA (design/logo), Moldflow Plastics Advisers, MPI, Moldflow Plastics Insight,

MPX, MPX (design/logo), Moldflow Plastics Xpert, Mudbox, Multi-Master Editing, NavisWorks, ObjectARX, ObjectDBX, Open

Reality, Opticore, Opticore Opus, Pipeplus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream,

ProjectPoint, ProMaterials, RasterDWG, Reactor, RealDWG, Real-time Roto, REALVIZ, Recognize, Render Queue, Retimer,

Reveal, Revit, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo), Sparks, SteeringWheels,

Stitcher, Stone, StudioTools, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual Construction, Visual Drainage, Visual

Landscape, Visual Survey, Visual Toolbox, Visual LISP, Voice Reality, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI

(design/logo) are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.

Autodesk Inventor 2012: Test Drive

69 Autodesk Inventor 2012: Test Drive

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals