Philips DCD322 User manual

Philips DCD322 User manual
Register your product and get support at
www.philips.com/welcome
DCD322
EN User manual
1
NL Gebruiksaanwijzing
125
157
FR Mode d’emploi
29
IT
Manuale utente
ES Manual del usuario
61
SV Användarhandbok
189
DE Benutzerhandbuch
93
DA Brugervejledning
217
Italia
DICHIARAZIONE DI CONFORMITA’
Si dichiara che l’apparecchio DCD322 Philips
risponde alle prescrizioni dell’art. 2 comma 1
del D.M. 28 Agosto 1995 n. 548.
Fatto a Eindhoven
Philips Consumer Electronics
Philips, Glaslaan 2
Norge
Typeskilt finnes på apparatens
underside.
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller
elektrisk støt, skal apparatet ikke
utsettes for regn eller fuktighet.
5616 JB Eindhoven, The Netherlands
Advarsel: Usynlig laserstråling ved
åbning når sikkerhedsafbrydere er
ude af funktion. Undgå utsættelse for
stråling.
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket
sidder i stikkontakten.
Luokan 1 laserlaite Varoitus!
Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa
käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Huom.
Toiminnanvalitsin on kytketty toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.
Sisäänrakennettu verkkoosa on kytkettynä sähköverkkoon aina silloin, kun pistoke on
pistorasiassa.
Huom.Toiminnanvalitsin on kytketty toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.
Sisäänrakennettu verkko-osa on kytkettynä sähköverkkoon aina silloin, kun pistoke on
pistorasiassa.
1 Important
Safety
Notice
2 Your DVD Micro Theater
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Connect
Place the unit
Connect speakers
Connect FM antenna
Connect audio cables
Connect video cables
Connect an external audio device
(optional)
Connect power
4 Get started
Prepare the remote control
Turn on
Store radio stations automatically
Set clock
Adjust brightness of display panel
Find the correct viewing channel
Select the correct TV system
Change system menu language
Turn on Progressive Scan
5 Play
Play a disc
Play from USB or recored discs
Play a slideshow with background
music
Play control
Play options
Picture view options
6 Play iPhone/iPod
2
2
3
5
5
5
6
7
8
8
8
9
9
10
18
18
18
19
19
19
Compatible iPod/iPhone
Load the iPhone/iPod
Listen to the iPhone/iPod
Charge the iPhone/iPod
Remove the iPhone/iPod
7 Listen to radio
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Tune to a preset radio station
Show RDS information
8 Adjust sound
12
12
13
13
13
13
13
14
14
14
15
15
15
16
16
17
18
19
19
19
20
20
20
21
21
21
21
Adjust volume level
Select a sound effect
Mute sound
9 Adjust settings
11
12
English
Contents
21
21
21
22
22
General setup
Audio setup
Video setup
Preferences
10 Other features
23
23
23
24
24
24
Activate demonstration mode
Set alarm timer
Set the sleep timer
Listen to an audio device
Listen through headphone
11 Product information
24
24
25
26
26
Specifications
Supported disc formats
USB playability information
RDS program types
12 Troubleshooting
27
EN
1
1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation point’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
2
EN
or other apparatus (including amplifiers)
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
specified by the manufacturer.
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
• Install all batteries correctly, + and as marked on the unit.
• Do not mix batteries (old and new
or carbon and alkaline, etc.).
• Remove batteries when the unit is
not used for a long time.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
Risk of overheating! Never install this
apparatus in a confined space. Always leave
a space of at least four inches around this
apparatus for ventilation. Ensure curtains or
other objects never cover the ventilation slots
on this apparatus.
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Warning
• Never remove the casing of this unit.
• Never lubricate any part of this unit.
• Place this unit on a flat, hard and stable
surface.
• Never place this unit on other electrical
equipment.
• Only use this unit indoors. Keep this unit away
from water, moisture and liquid-filled objects.
• Keep this unit away from direct sunlight, naked
flames or heat.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
English
q Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
• Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as
your hearing adapts.
• Do not turn up the volume so high that
you can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
• Never look into the laser beam inside the unit.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
• Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
EN
3
Trademark notice
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX, Inc. This is
an official DivX Certified device that plays
DivX video. Visit www.divx.com for more
information and software tools to convert
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered in
order to play DivX Video-on-Demand (VOD)
content. To generate the registration code,
locate the DivX VOD section in the device
setup menu. Go to vod.divx.com with this
code to complete the registration process and
learn more about DivX VOD.
DivX®, DivX Certified® and associated logos
are registered trademarks of DivX, Inc. and
are used under license.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
This apparatus includes this label:
Copyright notice
Note
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
4
EN
• The type plate is located on the bottom of the
apparatus.
You can play DVD discs marked with the
following region code:
DVD region code
English
2 Your DVD
Micro Theater
Countries
Europe
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this apparatus, you can:
• Watch video from DVD/VCD/SVCD,
iPhone/iPod, or USB storage devices
• Enjoy audio from discs, iPhone/iPod, or
USB storage devices
• View pictures from discs or USB storage
devices
• Listen to FM radio
You can enrich sound output with these sound
effects:
• Dynamic Bass Boost (DBB)
• Digital Sound Control (DSC)
• Automatic loudness control
(LOUDNESS)
The apparatus supports these media/disc
formats:
What’s in the box
Check and identify the contents of your
package:
• Main unit
• 2 speakers
• Remote control with batteries
• Composite video cable (yellow)
• Power cord
• MP3 link cable (length: 60 cm)
• FM wire antenna
• User manual
• Quick start guide
Recordable
ReWritable
EN
5
Overview of the main unit
a
b
c
d
e
f
m
l
g
k
h
j
i
a Dock for iPod/iPhone
b DBB/LOUDNESS
• Turn on or off dynamic bass
enhancement.
• Turn on or off automatic loudness
control.
c
/
•
•
•
•
•
•
Skip to the previous/next track, title,
or chapter.
Select a preset radio station.
Stop play or erase a program.
e
Open or close the disc
compartment.
f MP3-LINK
• Jack for an external audio device.
6
EN
•
Headphone socket.
•
USB socket.
h
i Disc compartment
j Display panel
• Display current status.
k SOURCE
• Select a source.
l
•
Start or pause play.
d MODE/DIM
• Select repeat/shuffle play modes.
• Select a brightness level for the
display screen.
•
g
m
•
•
Turn on the apparatus or switch to
the standby mode.
VOLUME
Adjust volume.
Adjust time.
For video discs with playback
control(PBC): turn on/off PBC.
Access or exit the menu of iPhone/
iPod.
Return to the previous menu.
•
•
a
b
c
w
v
d
e
e AUDIO
• For VCD, select stereo, mono-left or
mono-right channel.
• For DVD/DivX video, select an audio
language.
f
g
h
i
j
t
k
l
m
s
Search in a track or disc.
For menus, navigate left/right.
Tune to a radio station.
Rotate a picture.
g OK
• Confirm a selection.
h
n
o
r
/
•
•
•
•
f
u
English
•
Overview of the remote
control
p
q
SLOW/ ZOOM
• For menus: navigate up/down.
• Invert a picture.
• ( SLOW) For video discs: select a
slow play mode.
• ( ZOOM) For video: zoom in/out.
i DBB/LOUDNESS
• Turn on or off automatic loudness
control.
• Turn on or off dynamic bass
enhancement.
a
•
Turn on the apparatus or switch to
the standby mode.
b Source selection keys
• Select a source.
c DISPLAY/RDS
• Display play information on a
connected TV.
• For selected FM radio stations:
display RDS information.
• Synchronize clock with RDS.
d MENU/
• For video discs: access or exit the
disc menu.
j
•
Start or pause play.
k VOL +/• Adjust volume.
• Adjust time.
l
•
•
Stop play.
Erase a program.
m MUTE
• Mute or restore volume.
n CLOCK
• Set the clock.
• View the clock.
EN
7
o SLEEP/TIMER
• Set the sleep timer.
• Set the alarm timer.
3 Connect
p SUBTITLE
• Select a subtitle language.
Place the unit
q GOTO
• During disc play, specify a position to
start play.
r ANGLE/PROG
• Select a DVD camera angle.
• Program tracks.
• Program titles/chapters for DVD play.
• Program radio stations.
s Numeric keypad
• Select a title/chapter/track directly.
t
/
•
•
•
Skip to the previous/next track.
Skip to the previous/next title or
chapter.
Select a preset radio station.
u DSC
• Select a preset sound setting.
v MODE/DIM
• Select repeat/shuffle play modes.
• Select a brightness level for the
display screen.
w SYSTEM MENU
• Access or exit the system setup
menu.
1
2
Place the unit near to the TV.
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
• To avoid magnetic interference or unwanted
noise, never place this apparatus and speakers
too close to any radiation devices.
• Place this unit on top of a table or mount it on
the wall.
• Never place this unit in an enclosed cabinet.
• Install this unit near the AC outlet where the
AC power plug can be easily reached.
Connect speakers
Note
• For optimal sound, use the supplied speakers
only.
• Connect only speakers with impedance that is
the same or higher than the supplied speakers.
Refer to the Specifications section of this
manual.
8
EN
To hear audio from other audio devices as well
as the accompanied speakers, select a preferred
audio connection:
• Option 1: Connect through a coaxial
cable
• Option 2: Connect through analog audio
cables
Option 1: Connect through a coaxial
cable
1
Insert the speaker plugs to SPEAKER
OUT (L and R) sockets.
• The red plug to R.
• The white plug to L.
Connect FM antenna
Tip
• For optimal reception, fully extend and adjust
the position of the antenna.
• For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL jack.
• The unit does not support MW radio
reception.
1
Connect the supplied FM wire antenna to
the FM AERIAL socket on the unit.
You can enjoy multi-channel surround sound
from this apparatus when it is connected to a
digital audio device.
1
Connect a coaxial cable (not supplied) to
• the COAXIAL socket on this
product.
• the COAXIAL/DIGITAL input socket
on the device.
EN
9
English
Connect audio cables
Option 2: Connect through analog
audio cables
Option 1: Connect through an
S-Video cable
TV
TV
L LINE IN R
S-VIDEO IN
S-VIDEO
1
Connect an audio cable (red/white ends)
to:
• the AUDIO OUT (L and R) sockets
on this unit.
• the audio input sockets on the audio
device.
1
Connect an S-video cable (not supplied)
to:
• the S-Video socket on this unit.
• the S-Video socket on the TV.
Option 2: Connect through a
composite video cable
Connect video cables
You can select the best video connection that
your TV supports.
• Option 1: Connect through an S-Video
cable (for a standard TV).
• Option 2: Connect through a composite
video (CVBS) cable (for a standard TV).
• Option 3: Connect through component
video cables (for a standard TV or
Progressive Scan TV).
• Option 4: Connect through the iPhone/
iPod socket (for a standard TV).
10
EN
TV
1
Connect the composite video cable
(supplied) to:
• the VIDEO socket on this unit.
• the video input socket on the TV.
English
Option 3: Connect through
component video cables
TV
TV
COMPONENT VIDEO INPUT
Pr/Cr
Pb/Cb
Y
1
Note
• The progressive scan video quality is only
available when a progressive scan TV is
connected.
• If your TV does not support progressive scan,
you cannot view the picture.
• For how to activate progressive scan on your
TV, refer to the TV user manual.
Connect a composite video cable to:
• the iPhone/iPod socket on this unit.
• the video input socket on the TV.
Note
• To play audio only through the speakers of this
apparatus, mute the TV and other connected
audio devices.
• See “Play iPhone/iPod” for how to control the
play.
• See the user manual of your TV for how to
selecte the correct viewing channel.
Connect a progressive scan TV through
component video for higher quality video.
1
Connect component video cables (red/
blue/green - not supplied) to:
• the COMPONENT (Pr/Cr Pb/Cb Y)
sockets on this unit.
• the component input sockets on the
TV.
Option 4: Connect through the
iPhone/iPod socket
You can view video files that are stored on
your iPhone/iPod on your TV.
Connect an external audio
device (optional)
You can also listen to an external audio device
through this unit.
• Option 1: Connect through the AUX IN
sockets
• Option 2: Connect through the MP3LINK socket
Option 1: Connect through the AUX
IN sockets
1
Connect audio cables (red/white) to:
• the AUX IN (L and R) sockets on
this unit.
• the audio output sockets on the
external audio device.
EN
11
4 Get started
Caution
AUDIO OUT
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Option 2: Connect through the MP3LINK socket
1
Connect an MP3 link cable to:
• the MP3-LINK socket on this unit.
• the headphone socket on the
external audio device.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Connect power
Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
Caution
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
1
12
Connect the AC power cord to
• the AC ~ socket on this apparatus.
• the wall power socket.
EN
1
Open the battery compartment.
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
3
Note
Press
.
» The unit automatically stores radio
stations with sufficient signal strength.
» After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
• Before you press any function button on the
remote control, first select the correct source
with the remote control instead of the main
unit.
• If you are not going to use the remote control
for a long time, remove the battery.
Turn on
1 Press .
» The unit switches to the last selected
source.
Switch to standby mode
1
Press and hold for over 3 seconds to
switch the unit to Eco Power Standby
mode.
» The backlight on the display panel
turns off.
» The blue Eco Power indicator turns on.
Set clock
1 In standby mode, press and hold CLOCK
for over 2 seconds to activate the clock
setting mode.
» [SET CLOCK] scrolls on the display,
and then [24H MODE] (24-hour time
format) appears.
2
Press VOL +/- to select [24H MODE] or
[12H MODE] (12-hour time format), and
then press CLOCK to confirm.
» The hour digits begin to blink.
3
4
Press VOL +/- to set the hour.
5
6
Press VOL +/- to set the minute.
Press CLOCK to confirm.
» The minute digits begin to blink.
Press CLOCK to confirm.
To switch the unit to standby mode:
1
In Eco Power Standby mode, press and
hold for over 3 seconds.
» The clock (if set) appears on the
display panel.
» The blue Eco Power indicator turns off.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
2
Turn on the unit.
Press SOURCE repeatedly until
[TUNER] is displayed.
» [AUTO INSTALL PRESS----PLAY
to start the automatic
KEY] (press
installation) is displayed.
Adjust brightness of display
panel
1 In standby mode, press MODE/DIM
repeatedly to select different brightness
levels.
Find the correct viewing
channel
1 Press to turn on the unit.
2 Press DISC to switch to disc mode.
3 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
EN
13
English
2
•
Go to the lowest channel on your
TV, then press the Channel Down
button until you see the blue screen.
Press the source button repeatedly
on the remote control of your TV.
•
Tip
• The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO etc. See the TV user
manual on how to select the correct input on
the TV.
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
• The TV supports progressive scan signals.
• You have connected this unit with the TV
through component video.
1
2
Turn on the TV.
3
Switch the TV to the correct viewing
channel for this unit.
4
5
6
Press DISC.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
2
3
4
5
Press SYSTEM MENU.
Select [Video Setup].
Select [TV System] and then press
.
Select a setting and then press OK.
• [NTSC] - For TV with NTSC color
system.
• [PAL] - For TV with PAL color
system.
• [Multi] - For TV that is compatible
with both PAL and NTSC.
To exit the menu, press SYSTEM MENU.
Change system menu
language
1 Press SYSTEM MENU.
2 Select [General Setup].
3 Select [OSD language] and then press .
4 Select a setting and then press OK.
5 To exit the menu, press SYSTEM MENU.
14
EN
Ensure that the TV progressive scan
mode is deactivated (see the TV user
manual).
Press SYSTEM MENU.
Press / to select [Video Setup] in the
menu, then press .
7
Select [Component Video], then press
.
8
Select [P-Scan], then press OK.
» The progressive setup is complete.
Caution
• Risk of damage to the unit! During play, never
move the unit.
1
• Never look at the laser beam inside the unit.
• Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
• Never put any objects other than discs into
the disc compartment.
1
2
1
3
During play, press MENU/ to enable/
disable playback control.
» When PBC is enabled, the menu
screen is displayed.
» When PBC is disabled, normal play is
resumed.
Select an audio language
You can select an audio language for a DVD or
DivX (Ultra) video.
1
Press DISC to select the DISC source.
Press on the front panel.
» The disc tray opens.
.
The PBC feature allows you to play VCD
interactively according to the menu screen.
Play a disc
Caution
Press MENU/
For VCD with PlayBack Control (PBC)
feature (version 2.0 only):
English
5 Play
During disc play, press AUDIO.
» The language options appear. If the
selected audio channels is unavailable,
the default disc audio channel is used.
Note
• For some DVDs, the language can only be
changed from the disc menu. Press MENU/
to access the menu.
Place a disc onto the tray and press .
» Ensure that the label faces up.
4
Play starts automatically.
• To stop play, press .
.
• To pause or resume play, press
• To skip to the previous/next title/
chapter/track, press / .
If play does not start automatically:
1
Select a title/chapter/track and then press
.
Select a subtitle language
You can select a subtitle language for a DVD
or DivX (Ultra) video.
1
During play, press SUBTITLE repeatedly.
Note
• For some DVDs, the language can only be
Tip
changed from the disc menu. Press MENU/
to access the menu.
• To play a locked DVD, enter the 4-digit
parental control password.
Use the disc menu
When you load a DVD/(S)VCD disc, a menu
may be displayed on the TV screen.
To access or exit the menu manually:
Play from USB or recored
discs
You can play DivX (Ultra)/MP3/WMA/
JPEG picture files copied onto a CD-R/RW,
recordable DVD or USB storage device.
EN
15
1
Select a source.
• For a USB storage device, press USB.
• For a disc, press DISC.
This apparatus can play MP3/WMA files and
JPEG photos simultaneously.
2
Insert the USB storage device or disc.
» The play starts automatically.
To select a specified file for play,
1
2
3
4
Press
Note
to stop play.
• The MP3/WMA and JPEG files must be stored
on the same disc or USB storage device.
Press / to select a folder, and then
press OK to confirm.
• To return to the upper-level
directory, press / to select ,
and then press OK.
Press
/
Play a slideshow with
background music
1
2
to select a file from the folder.
Press
to start play.
• To pause or resume play, press
• To skip to the previous/next file,
press / .
• To change the subtitle language
during the play of a DivX (Ultra)
video, press SUBTITLE.
.
Play an MP3/WMA file.
Navigate to the photo folder/album and
press
to start the slideshow.
» Slideshow begins and continues till the
end of the photo folder or album.
» Audio continues till the end of the last
file.
• To return to the menu, press
MENU/ .
• To stop the slideshow, press .
• To stop music play, press again.
Play control
Select repeat/shuffle play options
1
During play, press MODE/DIM repeatedly
to select a play option.
• To resume normal play, press
MODE/DIM repeatedly until no
option is displayed.
Search forward/backward
Note
1
• You can only play DivX (Ultra) videos rented
or purchased through the DivX registration
code of this unit.
• Subtitle files with the following filename
extensions (.srt, .smi, .sub, .ssa, .ass) are
supported but do not appear on the file
navigation menu.
• The subtitle filename has to be the same as
the file name of the video.
16
EN
During video/audio play, press /
repeatedly to select a search speed.
• To resume play at normal speed,
press
.
Search by time or title/chapter/track
number
1
2
3
During video/audio play, press GOTO.
Press
to select a field.
Enter the desired time or number.
For the time field, enter the play
position in sequence of hour, minute
and second.
• For the title/chapter/track field, enter
the title/chapter/track number.
» Play starts automatically at the selected
point.
Resume video play from last stopped
point
•
•
For MP3/WMA/DivX (Ultra) files stored on a
CD-R/RW, recordable DVD, or USB storage
device,
1
During play, press / to select a track.
• If a DivX (Ultra) file is played, press
to access the USB/disc directory
first.
• To return to the upper-level
directory, press / to select ,
and then press OK.
2
Press ANGLE/PROG.
» [Add to Program List] (added to the
program list) is displayed.
3
Repeat steps 1-2 to program more tracks.
• You can program tracks in different
formats in different folders.
4
Press MENU/ to access the list of
programmed tracks.
5
Press
to start play.
• To switch between the USB/disc
directory and the list of programmed
tracks, press MENU/ repeatedly.
• To remove a programmed track
from the list, access the list of
programmed tracks, press /
to select a track, and then press
ANGLE/PROG.
• To erase the program, remove all
programmed tracks from the list.
Note
• This feature is only available for DVD/VCD
play.
1
In stop mode and when the disc has not
been removed, press
.
To cancel resume mode and stop play
completely:
1
In stop mode, press
.
Play options
Program tracks
This function is only available for audio CDs
and WMA/MP3/DivX (Ultra) files.
For an audio CD,
1
During play, press twice.
The list of all tracks is displayed.
2
3
Press
/
to select a track.
Press ANGLE/PROG.
» [Add to Program List] (added to the
program list) is displayed.
4
5
Repeat steps 2-3 to program more tracks.
6
Press
to start play.
• To switch between the list of all
tracks and the list of programmed
tracks during play, press twice,
and then press MENU/ repeatedly.
Press MENU/ to access the list of
programmed tracks.
To remove a programmed track
from the list, access the list of
programmed tracks, press /
to select a track, and then press
ANGLE/PROG.
To erase the program, remove all
programmed tracks from the list.
English
•
Display play information
1
During play, press DISPLAY/RDS to
display play information on the TV.
Zoom in/out image
1
During video play, press and hold
(ZOOM) to zoom in/out the image.
EN
17
•
When the image is zoomed in, you
can press / / / to pan through
the image.
Slow-motion play
1
During video play, press and hold
(SLOW) to select a play speed.
» The sound is muted.
• To resume play at normal speed,
.
press
6 Play iPhone/iPod
You can enjoy audio from iPhone/iPod through
this unit.
Note
• The audio is only output through the supplied
speakers.
Change camera angle
Compatible iPod/iPhone
Some DVDs contain alternate scenes, such as
scenes recorded from different camera angles.
For such DVDs, you can select from the
available alternate scenes.
The unit supports the following iPod and
iPhone models.
1
During play, press PROG/ANGLE
repeatedly to switch between camera
angles.
Change the audio channel
Note
• This feature is only available for VCDs and
DivX (Ultra) videos.
1
During play, press AUDIO repeatedly to
select an audio channel available on the
disc:
• Mono Left
• Mono Right
• Stereo
Picture view options
Select a slide show play mode
You can view pictures as slide show in
different play modes.
1
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note
that the use of this accessory with iPod or
iPhone may affect wireless performance.
Made for
• iPod touch (1st, 2nd, and 3rd generation)
• iPod classic
• iPod with video
• iPod nano (1st, 2nd, 3rd, 4th, and 5th
generation)
• iPod with color display
• iPhone 3GS
• iPhone 3G
• iPhone
Press MODE/DIM repeatedly.
Rotate picture
1
During play, press / / / to rotate
the picture anti-clockwise/clockwise.
18
EN
Load the iPhone/iPod
1 Lift up the iPhone/iPod dock on top panel
until you hear a click.
The unit can automatically search and store
radio stations (see “Get started” > “Store radio
stations automatically”). You can also search and
store radio stations manually.
2
Place the iPhone/iPod in the dock.
Tune to a radio station
1 Press FM.
2 Press and hold / for more than 2
seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/ repeatedly until you find optimal
reception.
Program radio stations
automatically
Listen to the iPhone/iPod
1 Press iPhone/iPod to select iPhone/iPod
2
3
source.
Load your iPhone/iPod onto this apparatus.
Play the desired file on your iPhone/iPod.
• To pause/resume play, press
.
• To skip to a track, press / .
• To navigate the menu: press
MENU/ to access the menu, press
/ to select an item, and then
press OK to confirm.
Charge the iPhone/iPod
Note
• You can program a maximum of 20 preset
radio stations.
1
Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed briefly.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programed radio station is
broadcast automatically.
When the unit is connected to power, the
docked iPhone/iPod begins to charge.
Remove the iPhone/iPod
1 Pull the iPhone/iPod out of the dock.
2 Press down to hide the dock.
EN
19
English
7 Listen to radio
Program radio stations
manually
Note
• There are definitions of RDS program types
(see “Product information” > “RDS program
types”).
Note
• You can program a maximum of 20 preset
radio stations.
Synchronize clock with RDS station
1
2
3
4
Tune to a radio station.
Press ANGLE/PROG to activate
programming.
Press / to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
Repeat the previous steps to program
other stations.
You can synchronize the clock time on the
unit with an RDS station.
1
Tune to an RDS radio station that
transmits time signals.
2
Press DISPLAY/RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
Note
• To overwrite a programmed station, store
another station in its place.
Tune to a preset radio station
1 Press / to select a preset number
that you want.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
2
20
Tune to an RDS station.
Press DISPLAY/RDS repeatedly to scroll
through the following information (if
available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Frequency
EN
• The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
9 Adjust settings
Adjust volume level
1 During play, press VOL +/- to increase/
1
2
3
4
decrease the volume level.
Select a sound effect
Note
• You cannot use different sound effects at the
English
8 Adjust sound
Press SYSTEM MENU.
Select a setup page.
Select an option and then press
.
Select a setting and then press OK.
• To return to the previous menu,
press .
• To exit the menu, press SYSTEM
MENU.
same time.
Select a preset sound effect
1
During play, press DSC repeatedly to select:
• [FLAT] (flat)
• [POP] (pop)
• [JAZZ] (jazz)
• [ROCK] (rock)
• [CLASSIC] (classic)
General setup
On the [General Setup] page, you can set the
following options:
[OSD language]
Select the preferred language for on-screen
display.
[DivX® VOD Code]
Display the DivX® registration code.
Enhance bass
[DivX Deactivation]
The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
DSC option. You can manually select the
DBB setting that best suits your listening
environment.
The feature of automatic loudness control
(LOUDNESS) enables the system to increase
the treble and bass sound effect at low volume
levels automatically (the higher the volume,
the lower the treble and bass increase).
Deactivate the authorization to current user.
1
During play, press DBB/LOUDNESS
repeatedly to turn on/off the DBB or
LOUDNESS feature.
• [DBB]: The DBB feature is enabled.
• [LOUDNESS]: The LOUDNESS
feature is enabled.
• [FLAT]: Both the DBB feature and
the LOUDNESS feature are disabled.
Mute sound
1 During play, press MUTE to mute or
Note
• Enter this DivX registration code when you
rent or purchase a video from http://vod.divx.
com/. The DivX videos rented or purchased
through the DivX® VOD (Video On
Demand) service can be played only on the
device to which it is registered.
Audio setup
On the [Audio Setup] page, you can set the
following options:
[Digital Output]
Select audio formats supported by the
connected device.
• [Off] – Turn off the digital output.
restore sound.
EN
21
•
•
[PCM] – If the connected device
cannot decode multichannel audio,
select this option.
[All] – If the connected device
supports multi-channel audio
formats, select this option.
•
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars
on the top and bottom of the screen.
[Wide Screen] – For wide-screen
TV: display ratio 16:9.
•
[Picture Setting]
[Night Mode]
Customize picture color settings.
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] – enjoy quiet viewing at night
(DVDs only).
• [Off] – enjoy surround sound with
its full dynamic range.
[Component Video]
Set the video output according to the video
connection. If the composite connection is
used, this setting is not required.
• [S-VIDEO] – If the S-Video
connection is used, select this option.
• [Interlaced] – For ordinary TV: turn
on the interlace mode.
• [P-Scan] – For progressive scan TV:
turn on the progressive scan mode.
Video setup
On the [Video Setup] page, you can set the
following options:
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [NTSC] - For TV with NTSC color
system.
• [PAL] - For TV with PAL color
system.
• [Multi] - For TV that is compatible
with both PAL and NTSC.
Preferences
On the [Preferences] page, you can set the
following options:
[Audio]
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle language for disc play.
[Disc Menu]
Select the preferred disc menu language.
Note
[TV Display]
• If the language you have set is not available on
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
the disc, the disc uses its own default language.
• For some discs, the subtitle/audio language can
only be changed from the disc menu.
[DivX Subtitle]
Select a character set that supports the DivX
subtitle.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
16:9 (Wide Screen)
Note
•
22
EN
[4:3 Pan Scan] – For 4:3 screen TV:
full-height display with the trimmed
sides.
• Ensure that the subtitle file has the exact same
file name as the movie file. If for example the
file name of the movie is ‘Movie.avi’, then you
will need to name the text file ‘Movie.sub’ or
‘Movie.srt’.
Restrict access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
Note
• Rated discs above the level you set in [Parental
10 Other features
English
[Parental Control]
Activate demonstration mode
You can see an overview of all features.
1
In the standby mode with clock display
(if set), press on the main unit to
activate the demonstration mode.
» A demonstration of major available
features starts.
To deactivate the demonstration mode:
• The ratings are country-dependent. To allow
1
all discs to play, select [8. Adult].
• Some discs have ratings printed on them but
are not recorded with ratings. This function
has no effect on such discs.
Set alarm timer
Control] require a password to be played.
[Password]
This setting allows you to change the
password for parental control. The default
password is ‘123456’.
1) Press the numeric keys to enter ‘123456’
or your last set password at [Old
Password] field.
2) Enter the new password at [New
Password] field.
3) Enter the new password again at [Confirm
new password] field.
4) Press OK to exit the menu.
Note
• Ensure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER until [SET TIMER] (set timer)
scrolls on the display.
2
Press SOURCE repeatedly to select a
source: CD, FM, USB, iPod/iPhone or
iPod/iPhone playlist.
• If iPod/iPhone playlist is selected as
alarm source, you need create a playlist
called “PHILIPS” in your iPod/iPhone.
• If no playlist called “PHILIPS” is
created in the iPod/iPhone or no
track is stored in the playlist, the unit
switches to iPod/iPhone alarm source.
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
Press VOL +/- repeatedly to set hour, and
then press SLEEP/TIMER again.
» The minute digits are displayed and
begin to blink.
Press VOL +/- to set minute, and then
press SLEEP/TIMER to confirm.
Press VOL +/- to adjust volume, and then
press SLEEP/TIMER to confirm.
» A clock icon appears on the display.
• If you forget the password, enter ‘123456’
[Version Info]
Display the software version of this apparatus.
[Default]
Reset all the settings to factory default, except
for the password and parental settings.
on the main unit again.
This unit can be used as an alarm clock.You can
select CD, iPod/iPhone, FM or USB as alarm source.
Note
before you set a new password.
Press
4
5
6
EN
23
Activate/deactivate alarm timer
1
In the standby mode, press SLEEP/TIMER
repeatedly.
» If timer is activated, is displayed.
» If timer is deactivated, disappears on
the display.
Tip
• Alarm timer is not available when the source is
set as “MP3 LINK” or “AUX”.
• If CD/USB/iPod/iPhone source is selected but no
disc is placed or no USB/iPod/iPhone connected,
the system switches to FM automatically.
11 Product
information
Note
• Product information is subject to change
without prior notice.
Specifications
Amplifier
Set the sleep timer
This apparatus can switch to standby
automatically after a set period.
1
When the apparatus is turned on, press
SLEEP/TIMER repeatedly to select a
preset period (in minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until [SLE
OFF] is displayed.
Listen to an audio device
You can listen to an audio device through this
apparatus.
1
Ensure the external audio device
is connected to this apparatus (see
“Connect” > “Connect an external audio
device”).
2
Press MP3 LINK/AUX repeatedly to select
the audio input through the MP3-LINK
socket or AUX IN (L and R) sockets.
3
Start to play the device (see the device
user manual).
Listen through headphone
1 Plug a headphone into the socket.
24
EN
Rated Output
Power
Frequency
Response
Signal to Noise
Ratio
Aux Input
2 X 30 W RMS
40 Hz - 20000 Hz, ±3
dB
> 65 dB
1 V RMS 20k ohm
Disc
Laser Type
Disc Diameter
Video Decoding
Video DAC
Signal System
Video Format
Video S/N
Audio DAC
Total Harmonic
Distortion
Frequency
Response
S/N Ratio
Semiconductor
12 cm/8 cm
MPEG-1 / MPEG-2 / DivX
12 Bits
PAL / NTSC
4:3 / 16:9
> 48 dB
24 Bits / 96 kHz
< 0.8% (1 kHz)
4 Hz - 20 kHz (44.1 kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 24 kHz (96 kHz)
> 65 dBA
Tuning Range
Tuning grid
Sensitivity - Mono, 26dB
S/N Ratio
Sensitivity - Stereo, 46dB
S/N Ratio
Search Selectivity
Total Harmonic
Distortion
Signal to Noise Ratio
87.5 - 108MHz
50KHz
<22 dBf
<43 dBf
>28dBf
<2%
>55dB
Speakers
Speaker
6 ohm
Impedance
Speaker Driver 3.5” woofer + 1” tweeter
Sensitivity
> 80 dB/m/W±4dB/m/W
General information
AC power
Operation Power
Consumption
Eco Standby Power
Consumption
Composite Video
Output
Coaxial Ouput
Headphone output
USB Direct
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
Weight
- With Packing
- Main Unit
- Speaker Box
220 - 230 V, 50 Hz
45 W
<1W
1.0 Vp-p, 75 ohm
0.5 Vpp ± 0.1 Vpp,
75 ohm
2 x 15 mW, 32 ohm
Version 2.0
Supported disc formats
•
•
•
•
Digital Video Discs (DVDs)
Video CDs (VCDs)
Super Video CDs (SVCDs)
Digital Video Discs + Rewritable
(DVD+RW)
• Compact Discs (CDs)
• Picture (Kodak, JPEG) files on CDR(W)
• DivX(R) disc on CD-R(W):
• DivX 3.11, 4.x and 5.x
• WMA
Supported MP3-CD formats:
• ISO 9660
• Max. title/album name: 12 characters
• Max. title number plus album: 255.
• Max. nested directory: 8 levels.
• Max. album number: 32.
• Max. MP3 track number: 999.
• Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
• Supported Bit-rates of MP3 disc are: 32,
64, 96, 128, 192, 256 (kbps).
• The following formats are not supported:
• Files like *.VMA, *.AAC, *.DLF,
*.M3U,
• *.PLS, *.WAV
• Discs recorded in Joliet format
223 x 88 x 242 mm
140 x 220 x 206 mm
7.7 kg
1.8 kg
2 x 1.95 kg
EN
25
English
Tuner (FM)
USB playability information
RDS program types
Compatible USB devices:
• USB flash memory (USB 2.0 or USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• memory cards (requires an additional
card reader to work with this apparatus)
Supported formats:
• USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
• Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
• AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
NO TYPE
NEWS
AFFAIRS
INFO
26
EN
SCIENCE
VARIED
POP M
ROCK M
MOR M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
No RDS programme type
News services
Politics and current affairs
Special information
programs
Sports
Education and advanced
training
Radio plays and literature
Culture, religion and
society
Science
Entertainment programs
Pop music
Rock music
Light music
Light classical music
Classical music
Special music programs
Weather
Finance
Children’s programs
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TES
ALARM
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
Alarm Test
Alarm
SPORT
EDUCATE
DRAMA
CULTURE
Caution
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
Philips.com/support). When you contact Philips,
ensure that your apparatus is nearby and the
model number and serial number are available.
No power
•
Ensure that the AC cord of the apparatus
is connected properly.
•
Ensure that there is power at the AC
outlet.
•
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No disc detected
•
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at
the lens has cleared.
•
Replace or clean the disc.
•
Use a finalized CD or correct format disc.
No picture
•
Check the video connection.
•
Turn on the TV to the correct Video-In
channel.
•
Progressive scan is activated but the TV
does not support progressive scan.
Black and white or distorted picture
•
The disc does not match the TV color
system standard (PAL/NTSC).
•
Sometimes a slight picture distortion may
appear. This is not a malfunction.
•
Clean the disc.
•
A distorted picture may appear during
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
•
The aspect ratio is fixed on the loaded
DVD disc.
•
The aspect ratio may not be changed for
some TV systems.
No sound or poor sound
•
Adjust the volume.
•
Disconnect the headphones.
•
Check that the speakers are connected
correctly.
•
Check if the stripped speaker wires are
clamped.
Remote control does not work
•
Before you press any function button,
first select the correct source with the
remote control instead of the main unit.
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities
(+/– signs) aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the
sensor on the front of the unit.
Disc does not play
•
Insert a readable disc with the label side
facing you.
•
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•
Press SYSTEM MENU to exit the system
setup menu.
•
Disable the password for parental control
or change the rating level.
•
Moisture has condensed inside the
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
•
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
EN
27
English
12 Troubleshooting
DivX video files cannot be played.
•
Ensure that the DivX video file is
complete.
•
Ensure that the file extension is correct.
•
Due to Digital Rights issue, the DRMprotected video files cannot be played
through an analog video connection
(e.g. composite, component and scart).
Transfer the video content onto the Disc
Media and play these files.
Poor radio reception
•
•
•
Increase the distance between the
apparatus and your TV or VCR.
Fully extend the FM antenna.
Connect an outdoor FM antenna instead.
Audio or subtitle languages cannot be set
•
The disc is not recorded with sound or
subtitles in multiple languages.
•
The audio or subtitle language setting is
prohibited on the disc.
Cannot display some files in USB device
•
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•
The formats of these files are not
supported.
USB device not supported
• The USB device is incompatible with the
unit. Try another one.
Timer does not work
•
Set the clock correctly.
•
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power
cord has been disconnected.
•
Reset the clock/timer.
28
EN
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DCD322_12_UM_Book 1_V2.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement