Panasonic | SCBTT350EB | Operating instructions | Panasonic SC-BTT350EGK

SCBTT755_350EBGN_VQT2W23.book 1 ページ
2010年7月8日 木曜日 午後6時53分
Operating Instructions
Blu-ray Disc Home Theater Sound System
Model No. SC-BTT755
SC-BTT350
The illustration shows the image of SC-BTT755
for Australia and New Zealand.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Model number suffix “EB” denotes UK model.
VQT2W23
EB GN
until
2010/07/13
SCBTT755_350EBGN_VQT2W23.book 2 ページ
2010年7月8日 木曜日 午後6時53分
Getting started
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
[BTT755[for[Australia[and[New[Zealand]
For wireless system
Product Identification Marking is located on the bottom of
the wireless system.
CAUTION!
≥ DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
≥ DO NOT PLACE SOURCES OF NAKED FLAMES,
SUCH AS LIGHTED CANDLES, ON THE UNIT.
≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
(Side of product)
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
≥ DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
≥ USE ONLY THE RECOMMENDED ACCESSORIES.
≥ DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
This product may receive radio interference caused by
mobile telephones during use. If such interference is
apparent, please increase separation between the product
and the mobile telephone.
The socket outlet shall be installed near the equipment and
easily accessible.
The mains plug of the power supply cord shall remain
readily operable.
To completely disconnect this apparatus from the AC
Mains, disconnect the power supply cord plug from AC
receptacle.
Do not touch the speaker terminals while the set is
operating.
Malfunction may occur due to static electricity.
VQT2W23
2
(Inside of product)
SCBTT755_350EBGN_VQT2W23.book 3 ページ
2010年7月8日 木曜日 午後6時53分
Caution for AC Mains
Lead
(For the United Kingdom and Republic of Ireland)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug
for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of
the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug fitted
and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1
Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2
Replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF
AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black or
Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or
Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN
OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
VQT2W23
3
SCBTT755_350EBGN_VQT2W23.book 4 ページ
2010年7月8日 木曜日 午後6時53分
Safety precautions
Information for Users on Collection and
Disposal of Old Equipment and used
Batteries
These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical and
electronic products and batteries should
not be mixed with general household
waste.
For proper treatment, recovery and
recycling of old products and used
batteries, please take them to applicable
collection points, in accordance with your
national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and
batteries correctly, you will help to save
valuable resources and prevent any
potential negative effects on human health
and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and
recycling of old products and batteries,
please contact your local municipality, your
waste disposal service or the point of sale
where you purchased the items.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Placement
Set the unit up on an even surface away from direct sunlight,
high temperatures, high humidity, and excessive vibration.
These conditions can damage the cabinet and other
components, thereby shortening the unit’s service life. Do not
place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the
unit and cause a fire. Do not use a DC power source. Check
the source carefully when setting the unit up on a ship or other
place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the
lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock. Do not handle the plug
with wet hands. This can cause electric shock.
Foreign matter
For business users in the European
Union
If you wish to discard electrical and
electronic equipment, please contact your
dealer or supplier for further information.
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect
the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
[Information on Disposal in other
Countries outside the European Union]
These symbols are only valid in the
European Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the correct
method of disposal.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs,
disconnect the AC mains lead and contact your dealer or an
authorized service centre. Electric shock or damage to the unit
can occur if the unit is repaired, disassembled or reconstructed
by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
VQT2W23
4
Cd
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.
SCBTT755_350EBGN_VQT2W23.book 5 ページ
2010年7月8日 木曜日 午後6時53分
Table of contents
•Assembling the speakers [BTT755] ...................................12
•Preparing cables and making connection .......................13
STEP 2: Positioning ........................................ 14
STEP 3: Connections ...................................... 15
•Speaker cable connection ..............................................15
•Connection to a TV .........................................................16
•Connection with Set Top Box, etc. .................................17
•Radio antenna connection ..............................................18
•Digital transmitter connection .........................................18
•Connection to a broadband network ...............................19
STEP 4: AC mains lead connection ................ 20
STEP 5: Preparing the wireless system .......... 20
STEP 6: Easy setup ........................................ 21
•Network Easy Setting .....................................................22
•Firmware updating ..........................................................23
STEP 7: Reprogramming the remote control .... 24
Inserting or removing media ............................ 24
START menu ................................................... 25
Enjoying sound effects from all speakers ....... 26
•Enjoying surround sound effects ....................................26
Other devices
Using the iPod/iPhone ..................................... 34
•iPod/iPhone Connection ................................................ 34
•iPod/iPhone Playback .................................................... 35
Advanced operations
Enjoying VIERA CAST ..................................... 36
Playback menu ................................................ 36
DLNA feature ...................................................38
Setup menu .....................................................39
•Speaker settings ............................................................ 43
Optional speaker settings
Speaker installation option ............................... 44
Playback
Reference
Playing video contents .................................... 27
Troubleshooting guide ..................................... 45
Messages ........................................................ 48
About MP3/JPEG/DivX/
AVCHD/MPEG2 files ....................................... 49
Supplemental information ................................50
Glossary ...........................................................52
Specifications ...................................................53
Index ................................................................55
•Other operations during play ..........................................27
•Useful functions ..............................................................28
•Enjoying BD-Live or BONUSVIEW in BD-Video .............28
•Regarding DivX ..............................................................29
Enjoying Blu-ray 3DTM video ............................ 29
•3D settings ......................................................................29
Playing still pictures ......................................... 30
•Useful functions ...............................................................30
Playback
•Setting the audio link ...................................................... 33
•Easy control only with VIERA remote control ................ 34
Radio
STEP 1: Preparing the speakers ..................... 12
Linked operations with the TV
(VIERA Link “HDAVI ControlTM”) ...................... 33
TV
Playable discs/Cards/USB devices ................. 10
•Surround sound effects .................................................. 32
•Sound modes ................................................................. 32
•Selecting the type of audio from the
DIGITAL AUDIO IN terminal ......................................... 32
Other devices
•Remote control .................................................................8
•Main unit (Front) ...............................................................9
•Main unit (Rear) ................................................................9
Enjoying TV with unit’s speakers ....................32
Advanced operations
Accessory .......................................................... 6
Unit and media care .......................................... 7
Using the remote control ................................... 7
Control reference guide ..................................... 8
TV
Optional speaker
settings
Getting started
Getting started
Caution for AC Mains Lead ............................... 3
Safety precautions............................................. 4
Reference
Playing music .................................................. 31
Radio
Listening to the Radio ...................................... 31
•Presetting stations automatically ....................................31
•Presetting stations manually ...........................................31
•Listening/confirming the preset channels .......................32
•RDS broadcasting ..........................................................32
VQT2W23
5
SCBTT755_350EBGN_VQT2W23.book 6 ページ
2010年7月8日 木曜日 午後6時53分
Indicates features applicable to:
[BTT755]: SC-BTT755 only
[BTT350]: SC-BTT350 only
Getting started
≥ These operating instructions are applicable to models
SC-BTT755 and SC-BTT350 for a variety of regions.
Unless otherwise indicated, illustrations in these
operating instructions are of SC-BTT755 for Australia
and New Zealand.
≥ Operations in these instructions are described mainly
with the remote control, but you can perform the
operations on the main unit if the controls are the
same.
System
SC-BTT755
SC-BTT350
Main unit
SA-BTT755
SA-BTT350
Speaker system
Front speakers
SB-HF730
SB-HF230
Centre speaker
SB-HC730
SB-HC480
Surround speakers
Subwoofer
[For[Australia[and[New[Zealand]
Wireless system (with a digital transmitter)
SB-HS735
SB-HS230
SB-HW330
SB-HW480
SH-FX71
—
≥ Some accessories and external devices mentioned in these operating instructions that are not supplied with this
product may not be on sale in certain regions.
Accessory
Check the supplied accessories before using this unit.
For accessories of speakers, refer to page 12.
[BTT755]
[BTT350]
∏ 1 Remote control
(N2QAKB000090)
∏ 1 Remote control
(N2QAKB000090)
∏ 2 Batteries for remote control
∏ 2 Batteries for remote control
∏ 1 Sheet of speaker cable sticker
∏ 1 Sheet of speaker cable sticker
∏ 1 Video cable
(K2KA2BA00001)
∏ 1 Video cable
(K2KA2BA00001)
∏ 1 FM indoor antenna
(RSAX0002)
∏ 1 FM indoor antenna
(RSAX0002)
∏ 1 Antenna plug adaptor
(K1YZ02000013)
For the United Kingdom and Republic of Ireland
∏ 1 Antenna plug adaptor
(K1YZ02000013)
For the United Kingdom and Republic of Ireland
∏ AC mains lead
1 For the United Kingdom and Republic of Ireland
(K2CZ3YY00005)
2 For Australia and New Zealand
(K2CJ2DA00010)
(RFAX1023) with a ferrite core
∏ AC mains lead
1 For the United Kingdom and Republic of Ireland
(K2CZ3YY00005)
1 For Australia and New Zealand
(K2CJ2DA00010)
≥ Product numbers correct as of June 2010. These may be subject to change.
≥ Do not use AC mains lead with other equipment.
VQT2W23
6
2010年7月8日 木曜日 午後6時53分
Unit and media care
∫ Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Using the remote
control
Getting started
SCBTT755_350EBGN_VQT2W23.book 7 ページ
Insert so the poles (i and j) match those in the remote
control.
∫ Clean the lens with the lens cleaner
Lens cleaner: RP-CL720E
≥ This lens cleaner may not be available for sale in all
countries, e.g. not available in Germany, please consult
your Panasonic dealer for advice.
≥ This lens cleaner is primarily for use on Panasonic DVD
recorders (DIGA), but it is also suitable for use on this unit.
R6/LR6, AA
(Alkaline or manganese
batteries)
∫ Clean discs
Point it at remote control signal sensor on this unit. (> 9)
DO
DO NOT
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥ Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or
labels (rented discs etc).
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (> 45, “To return all settings to the
factory preset.”)
≥ The operation history may be recorded in the memory of this
unit.
VQT2W23
7
SCBTT755_350EBGN_VQT2W23.book 8 ページ
2010年7月8日 木曜日 午後6時53分
Control reference guide
1
VOL
3
1 2abc 3def
4ghi 5jkl 6mno
7pqrs 8tuv 9wxyz
CANCEL 0
PIP
BD/SD
4
1
2
3
AV
2
iPod
SEARCH
VOL
MUTE
RADIO
EXT-IN
PLAY
SEARCH
PAUSE
SKIP
14
15
16
5
STOP
STATUS
6
18
EN
U
19
P
M EN U
OK
8
11
12
11
21
12
13
RETURN
OPTION
9
10
20
-UP
7
START
9
10
EXIT
OP
DIRECT
NA
TOP M VIGAT
OR
4
5
6
7
8
17
SLOW
SKIP
Remote control
13
TV
22
SOUND SURROUND DISPLAY
-CH SELECT
-SLEEP
AUDIO
23
14
15
24
16
17
18
19
20
21
22
23
24
Turn the unit on and off (> 21)
Display the Home screen of VIERA CAST (> 36)
Select title numbers, etc./Enter numbers or characters
(> 36)
[CANCEL]: Cancel
Basic playback control buttons (> 27)
Select preset radio stations (> 32)
Show status messages (> 27)
Show Top Menu/DIRECT NAVIGATOR (> 27)
[3, 4, 2, 1]: Menu selection
[OK]: Selection
[2, 1]: Select preset radio station (> 32)
[2] (2;), [1] (;1): Frame-by-frame (> 27)
Show OPTION menu (> 28)
Coloured buttons (red, green yellow, blue)
These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
(> 30)
≥ Operating contents of VIERA CAST (> 36)
Set the sound mode (> 26)/Select speaker channel
(> 26)
Select surround sound effects (> 26)
TV operation buttons
You can operate the TV through the unit’s remote control.
[Í]: Turn the television on and off
[AV]: Switch the input select
[i j VOL] : Adjust the volume
Adjust the volume of the main unit
Mute the sound
≥ “MUTE” flashes on the unit’s display, while the function is
on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the unit is turned off.
Switch on/off Secondary Video (Picture-in-picture) (> 28)
Select the source
[BD/SD]: Select disc drive or SD card drive (> 25)
[iPod]: Select iPod/iPhone as the source (> 25, 35)
[RADIO/EXT-IN]: Select FM tuner, USB or external audio
as the source (> 25, 31, 32)
Select radio stations manually (> 31)
Exit the menu screen
Show START menu (> 25)
Show Pop-up menu (> 27)
Return to previous screen
Select audio (> 27)
Show Playback menu (> 36)/Set the sleep timer
1 Press and hold [jSLEEP].
2 While “SLEEP ££” is displayed, press [jSLEEP]
several times to select the time (in minutes).
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when cancelling the setting.
≥ To confirm the remaining time
Press and hold the button again.
VQT2W23
8
SCBTT755_350EBGN_VQT2W23.book 9 ページ
2010年7月8日 木曜日 午後6時53分
1 2
4
3
Getting started
Main unit (Front)
5
VOLUME
OPEN/CLOSE
iPod
Pull open.
SD CARD
6
1
2
3
4
5
6
7
SELECTOR
7
Standby/on switch (Í/I) (> 21)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Power indicator
The indicator lights when this unit is turned on.
Connect iPod/iPhone (> 34)
Adjust the volume of the main unit
Open or close the disc tray (> 24)
Disc tray
SD card slot (> 24)
9
8
8
9
10
11
12
13
10 11
12 13
USB port (> 24)
Display (FL display)
≥ “SRD” (SURROUND) lights when sound is output to the
surround speakers.
Remote control signal sensor
Distance: within approx. 7 m.
Angle: Approx. 20e up and down, 30e left and right
Select the source (> 25)
Stop (> 27)
Start play (> 27)
∫ If the front cover comes off
1 Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
2 Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
3 Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
Main unit (Rear)
1
2
3
4
5
6
7 8 9
AUX
AC IN
+
SPEAKERS
LAN
6
5
2
1
R3 L
3
4
R3 L
6
6
SUBWOOFER CENTER FRONT SURROUND
1
2
3
4
5
6
AC IN terminal (> 20)
Speaker terminals (> 15)
Cooling fan
HDMI AV OUT terminal (> 17)
LAN port (> 19)
USB port for optional wireless adaptor (> 19)
DC OUT
R
11
FM ANT (75 ) DIGITAL AUDIO IN
(STB/TV)
L
AV
OUT
10
VIDEO
OUT
OPTICAL
DIGITAL TRANSMITTER
5V
500mA
WIRELESS
LAN
(ARC)
7
8
9
10
11
AUX terminal (> 16)
VIDEO OUT terminal (> 16)
FM radio antenna terminal (> 18)
DIGITAL AUDIO IN terminal (> 16 , 17)
Digital transmitter dock (> 14, 18)
VQT2W23
9
SCBTT755_350EBGN_VQT2W23.book 10 ページ 2010年7月8日 木曜日 午後6時53分
Playable discs/Cards/USB devices
Type
Logo examples
[BD]
Type detail
BD-Video
Video
BD-RE
Video
JPEG
BD-R
Video
DivX®
DVD-Video
Video
DVD-RAM
Video
AVCHD
JPEG
DVD-R
[DVD]
DVD-R DL
DVD-RW
—
[CD]
—
Playable contents*
+R/+RW/+R DL
Video
AVCHD
DivX®
MP3
JPEG
Video
AVCHD
Music CD
Music [CD-DA]
CD-R
CD-RW
DivX®
Music [CD-DA]
MP3
JPEG
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB) MPEG2
SDXC Memory Card (48 GB, 64 GB) AVCHD
JPEG
(Compatible with both mini and micro types)
[SD]
(as of December 2009)
[USB]
—
USB device
(up to 128 GB)
* See page 11, 49–50 for more information on the types of content that can be played.
VQT2W23
10
DivX®
MP3
JPEG
∫ Discs that cannot be played in this unit
∫ Music CD
Any other disc that is not specifically supported or
previously described.
Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ HD DVD
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code “B”.
Example:
DVD-Video
[For[the[United[Kingdom[and[Republic[of[Ireland[
This unit plays DVD-Video marked with labels containing the
region number “2” or “ALL”.
Example:
2
ALL
1
2
4
∫ SD card
Getting started
SCBTT755_350EBGN_VQT2W23.book 11 ページ 2010年7月8日 木曜日 午後6時53分
≥ miniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
≥ Keep the Memory Card out of reach of children to
prevent swallowing.
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
≥ Useable memory may be slightly less than the card capacity.
∫ USB device
≥ This unit does not guarantee connection with all USB
devices.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
[For[Australia[and[New[Zealand]
This unit plays DVD-Video marked with labels containing the
region number “4” or “ALL”.
Example:
4
ALL
2
3
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play on
this unit. Please refer to the recorder’s instructions.
∫ BD-Video
≥ 3D videos can be played back when this unit is connected to
a 3D compatible TV using a High Speed HDMI Cable.
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD
Master Audio) adopted in BD-Video. In order to enjoy these
audio formats, refer to page 40.
≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files
were created.
≥ The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read
the disc’s instructions carefully.
VQT2W23
11
SCBTT755_350EBGN_VQT2W23.book 12 ページ 2010年7月8日 木曜日 午後6時53分
STEP 1: Preparing the speakers
Caution
≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to walls using methods other than those described in this manual.
≥ Do not touch the front netted area of the speakers. Hold by the sides.
[BTT755]
∏ 2 Front speakers
∏ 2 Surround speakers
∏ 4 Bases
(RYK1610-K1)
∏ 8 Screws A
(XTN5+10FFJK)
∏ 4 Stands (with cables)
(RYK1609A-K: RED)
(RYK1609-K: WHITE)
(RYK1609C-K: GREY)
(RYK1609B-K: BLUE)
∏ 1 Speaker cable
(REEX1154-1:
GREEN)
∏ 4 Screws B
(XYN5+J18FJK)
[BTT350]
∏ 5 Speaker cables
(REEX1152A-1: RED)
(REEX1153A-1: WHITE)
(REEX1154-1: GREEN)
(REEX1155-1: GREY)
(REEX1156-1: BLUE)
Assembling the speakers [BTT755]
Caution
Preparation
≥ Do not stand on the base. Be cautious when children are
near.
≥ When carrying speakers, hold the stand and base parts.
≥ To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥ For wall mount, refer to page 44.
≥ Keep the screws out of reach of children to prevent
swallowing.
1
Back of the base
Pull the cable
straight along the
line and slide into
the groove.
Screw A
2
Tighten
securely.
Insert the wire fully.
r: White
s: Blue line
Push!
Screw B
Leave about 80 mm
VQT2W23
12
2
Press into the groove.
Tighten securely.
1
SCBTT755_350EBGN_VQT2W23.book 13 ページ 2010年7月8日 木曜日 午後6時53分
1
Use of the speaker cable stickers is convenient
when making cable connections.
e.g. Front speaker (L)
2
Connecting the speaker cables. Insert the wire fully,
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BTT350]
Getting started
Preparing cables and making connection
FRONT
Lch



r: White
s: Blue line
A Speaker cable sticker (supplied)
B Connector
Speaker cable sticker
Colour
1 FRONT (L)
WHITE
2 FRONT (R)
RED
3 SURROUND (L)
BLUE
4 SURROUND (R)
GREY
5 CENTRE
GREEN
6 SUBWOOFER
PURPLE
Push!
Be sure to match the number on each sticker with the
connector colour.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.
[BTT755]
∫ Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.
A String (not supplied)
Thread from the wall to the speaker and tie tightly.
B Rear of the speaker
C Screw eye (not supplied)
D Wall
E Approx.150 mm





VQT2W23
13
SCBTT755_350EBGN_VQT2W23.book 14 ページ 2010年7月8日 木曜日 午後6時53分
STEP 2: Positioning
How you set up your speakers can affect the bass and the sound field.
Setup example
Place the front, centre, surround speakers at approximately
the same distance from the seating position.
The angles in the diagram are approximate.
≥ Keep your speakers at least 10 mm away from the system for proper
ventilation.

60°

120°

If it persists, move the speakers further away from the TV.
[BTT755[for[Australia[and[New[Zealand]
∫ Wireless system
To avoid interference, maintain the following distances
between the wireless system and other electronic devices
that use the same radio frequency (2.4 GHz band).


∫ If irregular colouring occurs on your TV,
turn the TV off for about 30 minutes.


A Centre speaker
≥ Put on a rack or shelf not to interfere with the TV’s various
sensors (ambient light, etc.). Vibration caused by the speaker
can disrupt the picture if it is placed directly on the TV.
B Front speakers
C Subwoofer
D Surround speakers
≥ Place the speakers at the same height or higher than ear
level.
E [BTT755[for[Australia[and[New[Zealand]
Wireless system
≥ Place the wireless system within approximately 10 m
from the main unit, and in a horizontal position with the
top panel faced upward.
≥ To allow for proper ventilation and to maintain good
airflow around the wireless system, position it with at
least 5 cm of space on all sides.
≥ Do not use the wireless system or the digital transmitter
in a metal cabinet or bookshelf.
e.g.,
Wireless
system
Wireless LAN:
approx. 2 m
Cordless phone and
other electronic devices:
approx. 2 m
The wireless system will automatically seek a clear channel if
any of these other devices interfere with its communication.
When this happens, the wireless link indicator (“ [W] ”) flashes
on the main unit, and there is a brief interruption in audio
coming from the surround speakers.
This is the normal operation of the product working to assure
the best possible performance of your home theatre system.
If the interference persists, try moving the other devices to
another location outside the range of the wireless system or
move the wireless system nearer to the main unit.
∫ Upgrade your system to 7.1-channel system
The main unit is designed to enjoy the 7.1ch surround sound. By
connecting 2 units of the Panasonic wireless system SH-FX71
with 4 speakers, more theatre-like effect can be available.
Necessary equipment:
[BTT755[for[Australia[and[New[Zealand]
≥ 1 optional wireless system (SH-FX71)
≥ 2 additional speakers
[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]
[Except[BTT755[for[Australia[and[New[Zealand]
You can enjoy surround speaker
sound wirelessly when you use the
optional Panasonic wireless
accessory (SH-FX71).
For more details, refer to the operating
instructions for the optional wireless
system.
VQT2W23
14
≥ Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥ Positioning speakers in front
It is possible to locate all the speakers in front of the listening position.
However, the optimal surround sound effect may not be obtainable.
≥ Place speakers on flat secure bases.
≥ Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
≥ For optional wall mount, refer to page 44.
[Except[BTT755[for[Australia[and[New[Zealand]
≥ 2 optional wireless systems (SH-FX71)
≥ 2 additional speakers
[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]
For more details, refer to the operating instructions for the
optional wireless system.
SCBTT755_350EBGN_VQT2W23.book 15 ページ 2010年7月8日 木曜日 午後6時53分
STEP 3: Connections
Getting started
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Speaker cable connection
Connect to the terminals of the same colour.
[BTT755[for[Australia[and[New[Zealand]





6 PURPLE
Subwoofer
5 GREEN
Centre speaker
2 RED
Front speaker (Rch)
1 WHITE
Front speaker (Lch)

3 BLUE
Surround speaker (Lch)
4 GREY Surround speaker (Rch)
Wireless system
SPEAKERS
ENCEINTES
LS / RB LB / RS
+
+
-
6
5
2
1
4
Main unit
3
SURR
R3 L
R3 L
6
6
SUBWOOFER CENTER FRONT SURROUND
Do not connect the surround
speaker cables to the main
unit when using the wireless
system.
L
SIDE
SURROUND (3 - 6 )
R
SIDE AMBIOPHONIQUES
Surround selector
The surround selector
switch must be set in the
centre position.
[Except[BTT755[for[Australia[and[New[Zealand]
6 PURPLE Subwoofer


 


5 GREEN
Centre speaker
2 RED
Front speaker (Rch)
1 WHITE
Front speaker (Lch)
4 GREY
Surround speaker (Rch)
3 BLUE
Surround speaker (Lch)
When using the optional wireless
system, do not attempt to connect
any extra surround or surround
back speakers to the main unit.
+
+
-
6
5
2
1
4
3
Main unit
R3 L
R3 L
6
6
SUBWOOFER CENTER FRONT SURROUND
VQT2W23
15
SCBTT755_350EBGN_VQT2W23.book 16 ページ 2010年7月8日 木曜日 午後6時53分
Connection to a TV
≥The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize
your system setting.
≥This system supports the PCM and the Dolby Digital bitstream input audio. However, for example the system does not support
the DTS bitstream input audio.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p signal,
please use HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
≥ Audio will be output through the system’s speakers when
“Off” is selected in “HDMI Audio Output”. (> 41)
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be
displayed properly.
≥ Turn off all equipment before connection.
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to
suit the type of audio from your digital equipment (> 32).
∫ HDMI
The HDMI connection supports VIERA Link “HDAVI Control”
(> 33) when used with a compatible Panasonic TV.
Basic connection
TV
VIDEO IN
To enjoy TV audio from this home theatre
system’s speakers
AUDIO IN
AUDIO OUT
L
L
R
R

1
2

Connect the TV and the main unit with the
Audio cable (not supplied).
Select “AUX” as a source (> 25).
AUX
A Audio cable (not supplied)
B Video cable (supplied)
AUX
L
VIDEO
OUT
R
VIDEO OUT
Connection for the better audio
VIDEO IN
TV
To enjoy TV audio from this home theatre
system’s speakers
OPTICAL
OUT
AUDIO IN
L
1
R


DIGITAL AUDIO IN
(STB/TV)
L
R
OPTICAL
VIDEO
OUT
OPTICAL
VIDEO OUT
[For[the[United[Kingdom[and[Republic[of[Ireland[
e.g.,
2
Connect the TV and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN ” or “D-IN” as a source
(> 25).
A Video cable (supplied)
B Optical digital audio cable (not supplied)
If the TV does not have a VIDEO IN terminal, connect using
a Scart adaptor (Scart—VIDEO IN).
VIDEO IN
A Scart adaptor (not supplied)
B Video cable (supplied)
16

AV1
VQT2W23

SCBTT755_350EBGN_VQT2W23.book 17 ページ 2010年7月8日 木曜日 午後6時53分
TV
To enjoy TV audio from this home theatre
system’s speakers
OPTICAL
OUT
AV IN
1


2
DIGITAL AUDIO IN
(STB/TV)
L
OPTICAL
AV
OUT
R
Connect the TV and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(> 25).
A HDMI cable (not supplied)
B Optical digital audio cable (not supplied)
≥ For the TV audio, an audio cable (not supplied) can be also
used by connecting the AUX terminal with the AUDIO OUT
terminal on the TV.
OPTICAL
(ARC)
Getting started
Connection for the best picture and audio
≥It is possible to playback 3D videos by connecting this unit with a 3D compatible TV.
HDMI AV OUT (ARC)
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cables. Be sure
to connect to the TV’s ARC compatible terminal.
≥Select “ARC” as the audio input source (> 25).
≥Refer to the operating instructions of the TV for the settings to output digital audio.
Connection with Set Top Box, etc.
Refer to the operating instructions of the respective
devices for the optimal connections.
e.g.,

TV
To enjoy TV audio from this home theatre
system’s speakers
1
OPTICAL
OUT
2

DIGITAL AUDIO IN
L
(STB/TV)
Connect the STB and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(> 25).
A Optical digital audio cable (not supplied)
B Set Top Box (Cable/Satellite), etc.
OPTICAL
R
OPTICAL
VQT2W23
17
SCBTT755_350EBGN_VQT2W23.book 18 ページ 2010年7月8日 木曜日 午後6時53分
Radio antenna connection
Using an indoor antenna

Main unit

FM ANT (75 Ω )
A FM indoor antenna (supplied)
B Adhesive tape
Affix this end of the antenna where reception is best.
Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
e.g.,

Main unit
FM ANT (75 Ω )


A FM outdoor antenna [Using a TV antenna (not supplied)]
The antenna should be installed by a competent technician.
B 75 ≠ coaxial cable (not supplied)
C Antenna plug adaptor (United Kingdom and Republic of Ireland
only)
≥ Keep the adaptor out of reach of children to prevent swallowing.
Digital transmitter connection
[BTT755[for[Australia[and[New[Zealand]
Do not insert or remove while the home theatre unit is on.
DO
DO NOT
DIGITAL TRANSMITTER
Insert fully until you
hear a click.
VQT2W23
18
Make sure that the digital transmitter is fully inserted.
If the digital transmitter is not fully inserted, the sound may
not be available from the surround speakers.
SCBTT755_350EBGN_VQT2W23.book 19 ページ 2010年7月8日 木曜日 午後6時53分
The following services can be used when this unit is connected
to broadband.
≥ Firmware can be updated (> 23)
≥ You can enjoy the BD-Live (> 28)
≥ You can enjoy the VIERA CAST (> 36)
≥ DLNA feature (> 38)
∫ Using LAN (ethernet) cable
For details about connection method, refer to the instructions
supplied with the connected equipment.
Getting started
Connection to a broadband network
∫ Using Wireless LAN Adaptor DY-WL10
(optional)
L
LAN
R
L
DC OUT
R
5V
500mA
WIRELESS
LAN





A LAN Cable [Straight]
(not supplied)
B Broadband router, etc.
C Internet
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.

A Wireless LAN Adaptor
B Wireless router (Access point), etc.
C Internet
≥ Only the Wireless LAN Adaptor DY-WL10 (optional) can
be used.
≥ Read the operating instructions for the Wireless LAN
Adaptor DY-WL10 (optional) thoroughly when using it.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN
services (Hotspot etc.) provided in airports, stations, cafes
etc.
VQT2W23
19
SCBTT755_350EBGN_VQT2W23.book 20 ページ 2010年7月8日 木曜日 午後6時53分
STEP 4: AC mains lead connection
\For\the\United\Kingdom\and\Republic\of\Ireland\only\
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
AC IN
+
AC IN
-

Main unit
[BTT755[for[Australia[and[New[Zealand]
Wireless system

≥ AC mains lead with a ferrite core is
for the wireless system. Do not
use any other AC mains lead
except the supplied one.

A AC mains lead (supplied)
B To a household mains socket

A AC mains lead (supplied)
B To a household mains socket
≥ Connect only after all other connections are complete.
≥The main unit consumes a small amount of AC power, even when it is turned off (When the “Quick Start” setting is “Off”: approx.
0.2 W, [BTT755[for[Australia[and[New[Zealand] Wireless system: approx. 0.3 W). In the interest of power conservation, if you will
not be using this unit for a long time, unplug it from the household mains socket.
STEP 5: Preparing the wireless system
[BTT755[for[Australia[and[New[Zealand]
Turn on the wireless system after all connections are complete.
Press [C I, B Í] on the wireless system.
WIRELESS LINK
Wireless system
VQT2W23
20
Unit on/off button [C I, B Í]
C I: The wireless system is on.
B Í: The wireless system is off.
WIRELESS LINK indicator
Red: The wireless system is on and the wireless link is deactivated.
Green: The wireless system is on and the wireless link is activated.
(“ [W] ” is also displayed on the main unit’s display.)
SCBTT755_350EBGN_VQT2W23.book 21 ページ 2010年7月8日 木曜日 午後6時53分
The Easy setup assists you to make necessary
settings.
Follow the on-screen prompts to make basic settings for the
system.
1
2
Press [Í].
Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Getting started
STEP 6: Easy setup
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Wireless System
If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position
Specify the positioning of the surround speakers.
Speaker check
Check if the connection to each speaker is valid.
OK
Speaker Output
Make surround sound setting for speaker output.
OK
TV Audio
Select the audio input connection from your TV,
[item with “(TV)”].
Quick Start
Speed of startup from standby mode is increased.
Preparation
≥ Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to
this unit.
3
Press [OK] several times to finish the “Easy
setup”.
After completing “Easy setup”, you can perform “Network Easy
Setting”.
≥ You can perform this setup anytime by selecting “Easy setup” in the Setup
menu. (> 42)
≥ Language and TV Aspect settings are automatically retrieved if this unit is
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later
via an HDMI cable.
VQT2W23
21
SCBTT755_350EBGN_VQT2W23.book 22 ページ 2010年7月8日 木曜日 午後6時53分
Network Easy Setting
Select “Wired” or “Wireless” and press [OK].
2 Press [RETURN] and then press [OK].
Then select an item on the following screen which
corresponds to the authentication type noted down in step
1 (> left).
Access Point Connection Setting
Network Easy Setting (Connection Test)
Select a connection mode.
Current setting
: Wired
Select authentication type.
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
WPA2-PSK (AES/TKIP)
WPA-PSK (AES/TKIP)
Open/Shared Key (WEP)
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.
Open system
Wired
Wireless
Follow the on-screen instructions to make the settings.
≥ Input your encryption key code in “Encryption Key”
supplied with your Wireless router (Access point).
OK
RETURN
∫ “Wired” connection
Follow the on-screen instructions to make your connection settings.
≥ When you experience problems (> right)
∫ “Wireless” connection
*1
If you select “Wireless” and “Wireless LAN Adaptor is not
connected.” is displayed, check that the Wireless LAN Adaptor
is fully inserted. Alternatively, disconnect and reconnect it. If
there is still no change in the display, consult your dealer for
advice.
*2
Select “WPS (PUSH button)” or “Search for
access point” and then follow the on-screen
instructions and make the settings.
Wi-Fi Protected Setup-compatible Wireless router (Access point) may
have the mark.
An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID
matches for both devices.
When you experience
problems with settings
Access Point Connection Setting
Access Point Connection Setting
Access Point Connection Setting
Failed to connect to the access point.
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
A conflict with other devices occurred.
Do you wish to setup Access Point
Connection Setting again ?
WPS (PUSH button)
Search for access point
Yes
WPS (PUSH button):
e.g.,
If your Wireless router (Access point)
supports WPS (PUSH button), you can
easily perform the settings by pressing
WPS button on it.
WPS (Wi-Fi Protected Setup) is a
1
standard that facilitates settings relating
to the connection and security of
wireless LAN devices.
1 Press WPS button or corresponding button of Wireless
router (Access point) until the lamp starts flashing.
≥ For details, refer to the operating instruction of Wireless
router (Access point).
2 Press [OK].
Search for access point:
Available Wireless routers (Access points) are searched and
listed. You can select the one to use from the list.
1 Press [3, 4] to select SSID*2 of Wireless router (Access
point) you want to connect with. Then press [OPTION] to
show information of the selected router, make a note of the
authentication and encryption type.
Access Point Connection Setting
Reception
SSID
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
SSID
XXXXXXXXXX
Wireless type
XXXXXXXXXX
Authentication type
XXXXXXXXXX
Encryption type
XXXXXXXXXX
XXXXXXXXXX
:XXXXXXXXXXXXXXX
:802.11n/g/b (2.4GHz)
:WPA-PSK
:AES
Search again
22
OK
Display
A conflict with other
devices occurred.
≥ If you can not find the SSID*2, select “Search again”.
Check the following
≥ Please wait a few moments,
and then try again.
≥ Setting of the Wireless
router (Access point) for
MAC Address etc.
A time out error occurred.
≥ The signal may be weak.
Using the USB extension
cable supplied with the
Wireless LAN Adaptor,
adjust the position of the
Wireless LAN Adaptor.
An authentication error or a ≥ The SSID and the
encryption key of the
time out error occurred.
Wireless router (Access
point).
≥ Please wait a few moments,
and then try again.
A device error occurred.
Select an access point to connect with.
To search for access point again, please
select "Search again" below.
VQT2W23
No
OK
≥ Connection of Wireless LAN
Adaptor
If there is no improvement in
symptom, consult your
dealer.
SCBTT755_350EBGN_VQT2W23.book 23 ページ 2010年7月8日 木曜日 午後6時53分
Network Easy Setting (Connection Test)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
: Fail
: Fail
: Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
Select “No” and press [OK] to finish Network
Easy Setting.
Yes
No
OK
Check the
following
Display
1. LAN cable connection or
Connection to access point
:Fail
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Home
network
available
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Pass
3. Connection to gateway
:Fail
≥ Connection of
the LAN
cables (> 19)
≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address /
DNS
Settings”
(> 42)
Network Easy Setting (Internet Connection Test)
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet
: Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
OK
Display
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 42)
≥ You can redo these settings individually using “Network Settings”. (> 42)
≥ Do not use this device to connect to any wireless network for which
you do not have usage rights.
During automatic search in a wireless network environment, wireless
networks (SSID) for which you do not have usage rights may be displayed;
however, using these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router (Access point) might change. When you have
trouble getting online on your PC, perform the network settings of your PC
in accordance with the settings of Wireless router (Access point).
≥ Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.
Getting started
Network Easy Setting (Connection Test)
Firmware updating
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
The latest firmware is available.
Please update firmware in Setup.
To update the firmware
Press [START] > select “To Others” > [OK] > select
“Setup” > [OK] > select “General” > [OK] > select
“Firmware Update” > [OK] > select “Update Now”
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 42, “System
Information”)
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
Check the following
Cannot find the server.
(B019)
≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (> 42)
Failed to connect to
the server.
(B020)
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (> 42) and the router
The firmware has been updated.
Current Installed Version:x.xx
OK
RETURN
≥ Downloading will require several minutes. It may take longer or may not
work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 42)
VQT2W23
23
SCBTT755_350EBGN_VQT2W23.book 24 ページ 2010年7月8日 木曜日 午後6時53分
STEP 7:
Reprogramming the
remote control
Inserting or removing
media
When other Panasonic products respond to this
remote control
Change “Remote Control” (> 42) on the main unit and the
remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
SD CARD
To change the code on the main unit.
1
2
While stopped, press [START].
Press [3, 4] to select “To Others” and
press [OK].
3
Press [3, 4] to select “Setup” and press
[OK].
4
Press [3, 4] to select “General” and press
[OK].
5
Press [3, 4] to select “Remote Control”
and press [OK].
6
Press [3, 4] to select the code (1 or 2) and
press [OK].
To change the code on the remote control.
1
While pressing [OK]
Press and hold the number button (1 or 2),
which has the same number you selected in
the step 6 for more than 5 seconds.
2
VQT2W23
24
Press [OK].
≥ When inserting a media item, ensure that it is facing the right
way up.
≥ While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media’s contents.
≥ When removing the SD card, press on the centre of the card
and pull it straight out.
∫ To switch sources
Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or
“USB”.
≥ If media is inserted while the unit is stopped, the source
switches automatically depending on the inserted media.
START menu
Major functions of this unit can be operated from the START
menu.
1
2
Playlists:
You can play playlists created on
DVD-VR.
To Others
Setup: (> 39)
Card Management: (> 28)
Press [START].
Press [3, 4] to select the item and press
[OK].
To exit the screen
Press [START].
Getting started
SCBTT755_350EBGN_VQT2W23.book 25 ページ 2010年7月8日 木曜日 午後6時53分
e.g., BD-Video
∫ Selecting the source by the remote control
Home Cinema
START
Button
BD-Video
Source
Playback
Top Menu
BD/SD
Network
iPod
Input Selection
Sound(Equalizer)
RADIO
EXT-IN
To Others
OK
BD/DVD or SD card (SD) (> 27)
iPod (IPOD) (> 34)
FM Radio (FM) (> 31)
USB device (USB) (> 27)
To enjoy sound from the TV (> 32)
AUX*1
ARC*1
DIGITAL IN*1 (D-IN)
RETURN
Playback
Viewing Picture
Play back the contents.
Top Menu
(> 27)
To enjoy sound from other devices (> 32)
DIGITAL IN*2 (D-IN)
Menu
(> 27)
*1
Network
*2
Home
Network
(DLNA)
(> 38)
Internet
Content
Displays the Home screen of the
VIERA CAST (> 36)
Switches to each source
“(TV)” is displayed next to items set for TV AUDIO
input.
“(CABLE/SATELLITE)” is displayed next to
DIGITAL IN when set for CABLE/SATELLITE
AUDIO input.
≥ Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected
video and/or audio.
BD/DVD/CD
SD card
iPod
Input Selection
FM Radio:
To enjoy the FM radio (> 31)
USB device
To enjoy sound from the TV
(> 32)
AUX*1:
When using an Audio cable
ARC*1:
When using an HDMI cable
(Available when using an ARC
compatible TV)
DIGITAL IN*1:
When using an Optical digital
audio cable
To enjoy sound from other
devices (> 32)
DIGITAL IN*2:
When using an Optical digital
audio cable
*1
*2
Sound(Equalizer)
“(TV)” is displayed next to items set
for TV AUDIO input.
“(CABLE/SATELLITE)” is displayed
next to DIGITAL IN when set for
CABLE/SATELLITE AUDIO input.
(> 26)
VQT2W23
25
SCBTT755_350EBGN_VQT2W23.book 26 ページ 2010年7月8日 木曜日 午後6時53分
Enjoying sound effects
from all speakers
Enjoying surround sound
effects
1
Press [SURROUND] several times to select
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CHANNEL
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
MANUAL
≥ The selected effect will only be displayed on the main
unit.
2
While “MANUAL” is displayed, press
[2, 1] and select the desired effect.
DOLBY PRO LOGIC II MOVIE
Suitable for movie software, or the one recorded in Dolby
Surround.
(except DivX)
DOLBY PRO LOGIC II MUSIC
Adds 5.1-channel effects to stereo sources.
(except DivX)
7.1CH VIRTUAL SURROUND
You can enjoy 6.1/7.1-channel surround-like effect using
5.1-channel speakers.
SUPER SURROUND
You can enjoy sound from all speakers with stereo
sources.
2CH STEREO
You can play any source in stereo. Sound will be output to
the front speakers and the subwoofer only.
∫ Adjusting speaker level during play
1 Press and hold [jCH SELECT] to activate the speaker
setting mode.
2 Press [jCH SELECT] several times to select the speaker.
Each time you press the button:
L R C RSRB* LB*LS SW

* When the optional surround back speakers are connected.
L R: Front speaker
(left and right: only the balance is adjustable.)
≥Press [2, 1] to adjust the balance of the front
speakers.
C: Centre speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
VQT2W23
26
≥ The channels not included in the playing audio will not
be displayed (subwoofer is displayed even if it is not
included).
3 Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
s6 dB to r6 dB
∫ Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥ The selected mode will only be displayed on the main
unit.
2 While the selected mode is displayed
Press [2, 1] and select the desired setting.
EQUALIZER
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER LEVEL
You can adjust the amount of base.
1 (Weakest effect) to 4 (Strongest effect)
≥The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics of
your room are not optimal.
≥The setting you make is retained, and recalled every
time you play from the same type of source.
CENTER FOCUS
(Effective when playing audio containing centre
channel sound.)
You can make the sound of the centre speaker seem like
it is coming from within the TV.
WHISPER-MODE SURROUND
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
≥ The sound effects/modes may not be available or have no effect with some
sources.
≥ You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
SCBTT755_350EBGN_VQT2W23.book 27 ページ 2010年7月8日 木曜日 午後6時53分
Preparation
Turn on the television and select the appropriate video input on
the television.
Stop
Press [Í] to turn on the unit.
Press [∫ STOP].
The stopped position is memorised.
Insert the media.
Resume play function
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select
the item and press [OK].
≥ When a message screen is displayed while playing back
3D compatible video software, play back in accordance
with the instructions.
≥ If play does not start, press [1 PLAY].
Press [1 PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press
[∫ STOP] several times to display “STOP” on the unit’s
display.
≥ On BD-Video discs including BD-J (> 52), the resume
play function does not work.
Getting started
These functions may not work depending on the media and
contents.
[BD] [DVD] [CD] [SD] [USB]
1
2
Other operations during play
Playback
Playing video contents
Playback
Pause
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
Press [;PAUSE].
≥ Press [;PAUSE] again or [1 PLAY] to restart play.
Search/Slow-motion
≥ Pop-up menu also appears by pressing [OPTION] and
selecting “Pop-up Menu”.
Search
∫ To show the status messages
While playing, press [SEARCH6] or [SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
e.g. BD-Video
Elapsed time in the title
C1
0:05.14
BD-Video
0:20.52
Current position
While paused, press [SEARCH6] or [SEARCH5].
≥ BD-Video and AVCHD: Forward direction [SEARCH5]
only.
The speed increases up to 5 steps.
≥ Press [1 PLAY] to revert to normal playback speed.
Skip
T: Title, C: Chapter, PL: Playlist
 T1
Slow-motion
PLAY
Total time
≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is output
as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC
Contents Output” for NTSC discs. (> 40)
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press
[∫ STOP] when you have finished playback to protect the unit’s motor,
your television screen and so on.
≥ Depending on media and contents, the display may change or may not
appear.
≥ DivX: Successive play is not possible.
≥ When a menu is displayed at the time a 1080/60p (1920k1080/60
progressive) video recorded by a Panasonic digital high-definition video
camera is played back, select “Play Video (AVCHD)”.
≥ It is not possible to playback AVCHD and MPEG2 video which have been
dragged and dropped, copied and pasted to the media.
While playing or paused, press [SKIP:] or [SKIP9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
≥ DivX: Backward direction [SKIP:] only.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward or
backward.
≥ Press [1 PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language (> 50), etc.
VQT2W23
27
SCBTT755_350EBGN_VQT2W23.book 28 ページ 2010年7月8日 木曜日 午後6時53分
Useful functions
1
2
Press [OPTION].
Select an item and press [OK].
While DIRECT NAVIGATOR screen is displayed
Properties
To display the titles properties (recording
date, etc.).
Chapter
View
To select the chapter.
To Picture
Playing still pictures (> 30).
Folder
To switch to another folder.
View Titles
To select the title.
To turn on/off secondary audio
1 Press [DISPLAY].
2 Press [3, 4] to select the “Disc” menu and press [1].
3 Press [3, 4] to select the “Signal Type” menu and press
[OK].
4 Press [3, 4] to select the “Soundtrack” under “Secondary
Video” menu and press [1].
5 Press [3, 4] to select the “On” or “Off”.
When “On” is selected, press [1] and then press [3, 4] to
select the language.
6 Press [RETURN] to exit.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (> 40).
While playing
Screen
Aspect
When black bars are shown at the top and
bottom or left and right sides of the screen,
you can enlarge the image to fill the screen.
Top Menu
To display Top Menu.
Pop-up
Menu
To display Pop-up Menu.
Menu
To display Menu.
Enjoying BD-Live discs with
Internet
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access the
BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” (> 41) is set to “4:3” or “4:3 Letterbox”,
the “Zoom” effect in “Screen Aspect” is disabled.
1
2
Connect to the network. (> 19)
3
Insert the disc.
≥ Depending on the media and contents, displayed items are different.
Enjoying BD-Live or
BONUSVIEW in BD-Video
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to
enjoy more functions such as subtitles, exclusive images and
online games by connecting this unit to the Internet.
Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage (> 52).
∫ Deleting data/Formatting SD cards
There are various functions in BD-Video that you can enjoy by
copying data to the SD card (Local Storage). If you no longer
need data recorded on the SD card, you can delete data with
the following operation.
Insert an SD card.
Press [START].
Press [3, 4] to select “To Others” and press [OK].
Press [3, 4] to select “Card Management” and press
[OK].
5 Press [3, 4] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].
1
2
3
4
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
Card Management
SD CARD
No. of Files 6
Free space 300 MB
BD-Video Data Erase
Playing picture-in-picture
Format SD Card
To turn on/off secondary video
OK
Press [PIP].
Format this SD Card.
RETURN

6 Press [2, 1] to select “Yes” and press [OK].
7 Press [2, 1] to select “Start” and press [OK].

VQT2W23
28
A Secondary video
B Primary video
≥ To use the above functions, it is recommended that you format the card on
this unit. If the SD card you use is formatted, all data on the card will be
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(> 40).
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
SCBTT755_350EBGN_VQT2W23.book 29 ページ 2010年7月8日 木曜日 午後6時53分
Regarding DivX
ABOUT DIVX PLUSTM HD:
DivX® is a digital video format created by DivX, Inc. This is an
official DivX Certified® device that plays DivX video, including
DivX PlusTM HD video (H.264/.MKV) up to 1080p and premium
content. Visit www.divx.com for more information and software
tools to convert your files into DivX video.
Enjoying Blu-ray 3DTM
video
[BD]
You can enjoy powerful videos with realistic sensations of the
Blu-ray 3DTM compatible video software by connecting this unit
with a High Speed HDMI Cable to a 3D compatible TV.
Playback
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play
DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section
in the device setup menu.
Go to vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
≥ Video images of the DivX VOD contents stored on USB
device can be output only through the HDMI output terminal.
Display the unit’s registration code.
(> 42, “DivX Registration” in “General”)
The illustration is an image.
DivX Registration
You must register this unit to play
protected DivX videos.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/

When playing back a disc that has recorded titles with a 2
screen structure (Side by side) etc. which can be enjoyed in
3D, it will playback in accordance with the 3D settings on the
TV, regardless of the settings mentioned to the table below.
≥ Screen displays, such as Playback menu, will not display
correctly.
Preparation
A 10 alphanumeric characters
≥ After playing DivX VOD content for the first time, the
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration code
different from this unit’s code, you will not be able to play this
content.
Cancel the unit’s registration.
(> 42, “DivX Registration” in “General”)
Press [2, 1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in
www.divx.com.
Regarding DivX VOD content that can only be played a set
number of times
Some DivX VOD contents can only be played a set number of
times. When you play this content, the number of times already
played and initially playable number of times is displayed.
≥ The remaining number of plays decreases each time a
programme is played. However, when playing from the point
where play was previously stopped, the remaining number of
plays does not decrease due to the resume play function.
∫ Displaying subtitle text
You can display subtitle text on the DivX video disc on this unit.
This function has no relation to the subtitles specified in DivX
standard specifications and has no clear standard. The
operation might be different or it may not operate properly
depending on the way the file was made or the state of this unit
(playing, stopped, etc.).
Set “Subtitle” in “Disc” (> 36)
≥ DivX video files that do not display “Text” do not contain subtitle text.
≥ If the subtitles text is not displayed correctly, try changing the language
settings. (> 40)
≥ You may not display subtitle text depending on a file.
Connect 3D compatible TV to an HDMI AV OUT terminal of
this unit using a High Speed HDMI Cable, and select HDMI
video input mode on the TV. (> 16, 17)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(> 27)
≥ Playback following the instructions displayed on the screen.
3D settings
Perform the following settings as necessary.
Playback
method for 3D
disc
It is also possible to playback 3D discs
in 2D (conventional video). (> 39)
3D Type
If you cannot play back in 3D, change
the settings as required by the
connected TV format. (> 41)
≥ Change the settings for 3D on the
TV also when “Side by side” is
selected.
3D Playback
Message
Hide the 3D viewing warning screen.
(> 39)
Adjust the pop-up position for the
Graphic Display
playback menu or message screen
Level
etc. (> 37)
≥ Please refrain from viewing 3D images if you do not feel well or are
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
≥ Depending on the connected TV, the video being played back might switch
to 2D video due to changes in resolution etc. Check the 3D setting on the
TV.
≥ 3D video might not output the way it is set in “HDMI Video Format” or “24p VQT2W23
Output” (> 41).
29
SCBTT755_350EBGN_VQT2W23.book 30 ページ 2010年7月8日 木曜日 午後6時53分
Playing still pictures
[BD] [DVD] [CD] [SD] [USB]
(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card,
USB device)
1
2
1
2
Press [OPTION].
Select an item, then press [OK].
Insert a disc, SD card or USB device.
While “Album View” or “Picture View” screen is displayed
If the menu is displayed, press [3, 4] to select the item
and press [OK].
Start
Slideshow
BD-RE, DVD-RAM
Press [3, 4, 2, 1] to select the album and
press [OK].
Album View
DIRECT NAVIGATOR
DVD-RAM(VR)
2006 9 12
Total 13

Previous
Video
OK
RETURN
OPTION
Picture
Video
106_DVD
Total 8
3
Useful functions

Slideshow
Setting
Next

Slideshow
Page 02/02
Picture
Press OK to go to Picture View.
Press [3, 4, 2, 1] to select the still
picture and press [OK].
DVD-RAM(VR)
Video
Picture
2006 9 12
0001
0002
0003
0004
0005
0006
0007
0008
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
Music files on an iPod/iPhone or a music CD
or USB device can be played back as
background music during the slideshow.
Soundtrack Folder
A folder to play back can be selected when a
USB device with recorded MP3 is connected
to this unit.
Press [3, 4, 2, 1] to select “Set” and
press [OK].
Picture View
DIRECT NAVIGATOR
You can display still pictures one by one at a
constant interval.
Select
Folder
To switch to another higher folder.
≥ Only if there is a multiple number of higher
folders recognizable.
Folder
To select the still pictures in another folder.
To Video
Playing video contents (> 27).
To album
view
To display album view.
0009
Page 001/001
Play
OPTION
RETURN
Press [2, 1] to display the previous or next still picture.
While playing (except for slideshow)
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
Rotate
RIGHT
∫ To show the picture properties
Rotate LEFT
While playing, press [STATUS] twice.
e.g. JPEG on DVD-RAM
Shooting date
Date
11.12.2007
To exit the screen
Press [STATUS].
VQT2W23
30
Total
Rotate the still picture.
Zoom out
Reduce the still picture.
≥ This function is only available for
small-sized still pictures.
Zoom in
Cancel “Zoom out”.
3/9
≥ Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
≥ When a music CD, a USB device with MP3 recorded and an iPod/iPhone
are inserted/connected to this unit, iPod/iPhone has a priority to be played
back as background music.
SCBTT755_350EBGN_VQT2W23.book 31 ページ 2010年7月8日 木曜日 午後6時53分
Playing music
Listening to the Radio
Radio
[DVD] [CD] [USB]
Presetting stations
automatically
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
If the menu is displayed, press [3, 4] to select the item
and press [OK].
2
Press [3, 4] to select the track and press
[OK].
Music list
DIRECT NAVIGATOR
CD
No.
01
02
03
04
05
0.09
Up to 30 stations can be set.
1
2
4.30
Track1
5 Tracks / Total Play Time 20min54sec
Track Name
Play Time
4min30sec
Track1
3min41sec
Track2
Track3
4min30sec
Track4
3min11sec
Track5
5min 2sec
3
Press [STATUS] to select the position to
start the auto preset search.
LOWEST:
To begin auto preset with the lowest frequency (FM87.50).
CURRENT:
To begin auto preset with the current frequency.*
*To change the frequency, refer to “Presetting stations
manually”.
Press and hold [OK].
Release the button when “AUTO” is displayed.
Play
RETURN
“
Press [RADIO] to select “FM”.
Playback
Insert a disc or USB device.
Radio
1
The tuner starts to preset all the stations it can receive into
the channels in ascending order.
” indicates the track currently playing.
∫ Playing a track in another folder
1 While the “Music list” is displayed
Press [OPTION].
2 Press [3, 4] to select “Select Folder” and press [OK].
≥ “SET OK” is displayed when the stations are set, and the radio tunes to the
last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset
the stations manually.
Presetting stations manually
≥ You cannot select folders that contain no compatible tracks.
Preparation
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH6] or [SEARCH5] to select the
frequency.
≥ To start automatic tuning, press and hold [SEARCH6], [SEARCH5]
until the frequency starts scrolling. Tuning stops when a station is found.
1
While listening to the radio broadcast
Press [OK].
2
While “P” is flashing on the display
Press the number buttons to select a
channel.
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2]
≥ A station previously stored is overwritten when another station is stored in
the same channel preset.
VQT2W23
31
SCBTT755_350EBGN_VQT2W23.book 32 ページ 2010年7月8日 木曜日 午後6時53分
Enjoying TV with unit’s
speakers
TV
Listening/confirming the preset
channels
1
2
Preparation
Press [RADIO] to select “FM”.
Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2].
Alternatively, press [W, X] or [2, 1].
Turn on your TV and select the appropriate audio input mode
[AUX, ARC, D-IN] to suit the connections to this unit. (> 25)
Surround sound effects
You can enhance stereo sources with surround sound effect.
1
2
RDS broadcasting
Surround modes to enjoy TV audio or stereo
sources from all speakers:
≥ DOLBY PRO LOGIC II MOVIE
≥ DOLBY PRO LOGIC II MUSIC
≥ SUPER SURROUND
If the station you are listening to is transmitting RDS signals,
“RDS” will light up on the display.
While listening to the radio broadcast
Press [DISPLAY] to display the text data.
PS: Programme service
PTY: Programme type
OFF: Frequency display
For more detailed information on this operation, please refer to
the “Enjoying surround sound effects” section on page 26.
Sound modes
PTY displays
NEWS
VARIED
FINANCE
COUNTRY
You can adjust the mode depending on the source or situation.
AFFAIRS
POP M
CHILDREN
NATIONAL
1
INFO
ROCK M
SOCIAL A
OLDIES
SPORT
M.O.R. M*
RELIGION
FOLK M
EDUCATE
LIGHT M
PHONE IN
DOCUMENT
DRAMA
CLASSICS
TRAVEL
TEST
CULTURE
OTHER M
LEISURE
ALARM
SCIENCE
WEATHER
JAZZ
2
∫ If noise is excessive
Press [AUDIO] to display “MONO”.
The sound becomes monaural.
Press the button again to cancel the mode. “AUTO
STEREO” will be displayed on the main unit. Depending on
the broadcast system, stereo or monaural will be selected.
“MONO” is also cancelled when you change the frequency.
≥ This setting can be preset for each broadcasting station.
While the selected mode is displayed on the unit’s
Press [2, 1] and select the desired setting.
For more detailed information on this operation, please refer to
the “Changing the sound modes” section on page 26.
Selecting the type of audio
from the DIGITAL AUDIO IN
terminal
∫ Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo broadcasting
TUNED:
Displayed when receiving monaural broadcasting or monaural
sound is selected.
Press [SOUND] several times to select the
mode.
display
* M.O.R. M=Middle of the road music
32
While “MANUAL” is displayed on the unit’s display
Press [2, 1] and select the desired effect.
[For[the[United[Kingdom[and[Republic[of[Ireland[
VQT2W23
Press [SURROUND] several times to select
the effect.
1
Press [EXT-IN] several times to select
“D-IN” (DIGITAL IN).
2
Press [AUDIO] several times to select the
type.
M1
M2
M1rM2 (stereo audio)
(Only works with Dolby Dual Mono)
≥ “M1” or “M2” is not available if “On” is selected in “Digital
Audio Input”. (> 40)
≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not
output from the HDMI AV OUT terminal.
SCBTT755_350EBGN_VQT2W23.book 33 ページ 2010年7月8日 木曜日 午後6時53分
You can turn on this unit and the TV, and start play with a
single press of a button.
While the unit and the TV are in standby mode;
Press [1 PLAY].
Speaker Selection
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) under “HDAVI Control”.
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
Preparation
1 Set “VIERA Link” to “On” (> 41).
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so that
the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
Setting the audio link
∫ Setting the audio link with the TV
With the remote control;
≥ Select the actual TV audio connection on the main unit.
1 Press [START] and press [3, 4] to select “To Others” and
press [OK].
2 Press [3, 4] to select “Setup” and press [OK].
3 Press [3, 4] to select “TV / Device Connection” and press
[OK].
4 Press [3, 4] to select “TV Audio Input”.
5 Press [2, 1] to switch “AUX”, “ARC” or “DIGITAL IN”.
≥ Select “AUX” or “ARC”*1 in “TV Audio Input” when the
DIGITAL AUDIO IN terminal is used for the STB
connection.
Whenever the connection or settings are changed, reconfirm
the points above.
∫ Setting the audio link with the STB
With the remote control;
≥ Select the STB input channel on the TV.
1 Press [EXT-IN] to select “D-IN”.
2 Press [STATUS] to select “CABLE/SATELLITE AUDIO
ON”.
≥ If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select “CABLE/SATELLITE AUDIO OFF” in step
2 above and then repeat steps 1 to 2.
You can select whether audio is output from the unit’s
speakers or the TV speakers by using the TV menu settings.
Home Cinema
This unit’s speakers are active.
≥ When this unit is in standby mode, changing the TV
speakers to this unit’s speakers in the TV menu will
automatically turn the unit on and select, “AUX”*2, “ARC”*1, *2
or “D-IN” (DIGITAL IN)*2 as the source.
≥ You can control the volume setting using the volume or mute
button on the TV’s remote control.
≥ If you turn off this unit, TV speakers will be automatically
activated.
Radio
(VIERA Link “HDAVI ControlTM”)
One touch play
TV
TV speakers are active.
≥ The volume of this unit is set to “0”.
≥ Audio output is 2-channel audio.
≥ When switching between this unit’s speakers and TV speakers, the TV
screen may be blank for several seconds.
≥ The audio from “AUX”, “DIGITAL IN”, “FM Radio” or “iPod” will be output
from this unit's speakers even though the TV speakers are selected.
TV
Linked operations with
the TV
Automatic input switching
(Power on link)
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the television is off, the television
will automatically turn on.
jWhen play starts on the unit
jWhen an action that uses the display screen is performed
(e.g., DIRECT NAVIGATOR screen)
[For[the[United[Kingdom[and[Republic[of[Ireland[
jBD-Video, DVD-Video:
When playback stops, the TV will automatically return to TV
tuner mode.
≥ When you switch the TV input to TV tuner mode, this unit will
automatically switch to “AUX”*2, “ARC”*1, *2 or “D-IN” (DIGITAL
IN)*2.
≥ This function does not work when the iPod/iPhone selector is
chosen. (> 35)
*1
*2
The selection works only when using an ARC compatible TV.
“AUX”, “ARC” or “D-IN” works depending on the setting in “Setting the
audio link”.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
VQT2W23
33
SCBTT755_350EBGN_VQT2W23.book 34 ページ 2010年7月8日 木曜日 午後6時53分
Using the iPod/iPhone
Other devices
Automatic lip-sync function
(for HDAVI Control 3 or later)
Delay between audio and video is automatically adjusted,
enabling you to enjoy smooth audio for the picture.(> 40,
“Audio Delay”)
≥ This function works only when “BD/DVD”, “SD”, “USB”,
“AUX”*2, “ARC”*1, *2 or “D-IN” (DIGITAL IN)*2 is selected as
the source on this unit.
*1
*2
The selection works only when using an ARC compatible TV.
“AUX”, “ARC” or “D-IN” works depending on the setting in “Setting the
audio link”.
Power Off Link
iPod/iPhone Connection
Preparation
≥ Before connecting/disconnecting the iPod/iPhone, turn the
main unit off or reduce the volume of the main unit to its
minimum.
≥ Make sure that the video cable connection is made to view
photos/videos from the iPod/iPhone.
1
2
Push # to open the iPod/iPhone lid.
Connect the iPod/iPhone (not supplied)
firmly.
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
1
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later.)
Select “Video” in “Power Off Link” (> 41)
Easy control only with VIERA
remote control
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.
≥ This works only during “BD/DVD”, “SD” or “USB” playback
and resume modes.
1
Press [OPTION].

A Dock adapter (not supplied)
≥ Attach the dock adapter until firmly fitting into the
dock. The adapter should be supplied with your
iPod/iPhone for the stable use.
If you need an adapter, consult your iPod/iPhone
dealer.
B Dock for iPod/iPhone
About recharging the battery
≥ iPod/iPhone will start recharging regardless of whether this unit is on or off.
≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone
charging in main unit standby mode.
≥ Once fully recharged, additional recharging will not occur.
≥ Compatibility depends on the software version of your iPod/iPhone.
Name
Memory size
Screen Aspect
iPod touch 3rd generation
32 GB, 64 GB
iPod nano 5th generation (video camera)
8 GB, 16 GB
Pop-up Menu
OPTION
OK
RETURN
Select an item, then press [OK].
≥ The OPTION menu may not appear while the Top Menu for
BD-Video or DVD-Video is displayed.
≥ The buttons that you can use for this unit vary depending on the TV. For
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
≥ Depending on the menu, some button operations cannot be performed
from the TV’s remote control.
34

Control Panel
Top Menu
VQT2W23
Main unit
iPod/iPhone
Compatible iPod/iPhone (as of June 2010)
e.g. BD-Video
2
2
iPod touch 2nd generation
8 GB, 16 GB, 32 GB
iPod classic
120 GB, 160 GB (2009)
iPod nano 4th generation (video)
8 GB, 16 GB
iPod classic
160 GB (2007)
iPod touch 1st generation
8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video)
4 GB, 8 GB
iPod classic
80 GB
iPod nano 2nd generation (aluminum)
2 GB, 4 GB, 8 GB
iPod 5th generation (video)
60 GB, 80 GB
iPod 5th generation (video)
30 GB
iPod nano 1st generation
1 GB, 2 GB, 4 GB
iPod 4th generation (colour display)
40 GB, 60 GB
iPod 4th generation (colour display)
20 GB, 30 GB
iPod 4th generation
40 GB
iPod 4th generation
20 GB
iPod mini
4 GB, 6 GB
iPhone 3GS
16 GB, 32 GB
iPhone 3G
8 GB, 16 GB
iPhone
4 GB, 8 GB, 16 GB
SCBTT755_350EBGN_VQT2W23.book 35 ページ 2010年7月8日 木曜日 午後6時53分
iPod/iPhone Playback
≥ Make sure that the “IPOD” source is selected. Press [iPod] to
select the source.
≥ To view photos/videos from the iPod/iPhone
Operate the iPod/iPhone menu to make the appropriate
photo/video output settings for your TV.
≥ To display the picture, turn on the TV and select the
appropriate video input mode.
1
2
Press [iPod] to select “IPOD”.
3
Press [3, 4] to select an item and press
[OK].
Press [3, 4] to select “Play Mode” and
then press [OK].
4
Press [3, 4] to select an item and press
[OK].
Shuffle (For music playback only.)
Songs:
Play all songs on iPod/iPhone in random order.
Albums:
Play all songs on an album in random order.
Press [STATUS] several times to select the
music menu or videos menu.
Repeat
One:
Play a single song/video repeatedly.
All:
Play all songs/videos from selected items (e.g., Playlists,
Albums, etc.) repeatedly.
≥ Repeat this step until the selected title starts playback.
≥ Press [2, 1] to display the previous or next page.
e.g., music playback screen
5
iPod
Good morning
Ronaldo
Happy days
Press [3, 4] to select “Menu” and then
press [OK].
3
Enjoy music/video
1
2
Press [START].
Press [3, 4] to select the setting and press
[OK].
-2:30
45 of 1230
Shuffle (Albums)
Repeat (All)
≥ The setting of the playback mode will be kept until changes are made on
the same iPod/iPhone.
≥ This function does not work when “Use iPod display (All)” is selected.
Basic controls
To exit, press [TOP MENU/DIRECT NAVIGATOR].
Enjoy photos
(For music and video playback only)
Buttons
3
4
Functions
Press [iPod] to select “IPOD”.
[1 PLAY]
Press [STATUS] several times to select
“ALL” on the unit’s display.
[∫ STOP]
Switch the TV input to video in.
[SKIP:,
SKIP9]
Skip
(Press and hold)
[SEARCH6,
SEARCH5]
Search
Play a slideshow on your iPod/iPhone.
The picture will be displayed on your TV.
To use the iPod touch/iPhone features
1 Press the Home button on the iPod touch/iPhone.
2 Select the iPod touch/iPhone features on the touch screen
to operate.
Other devices
1:00
1
2
TV
Preparation
Other methods of playback
[;PAUSE]
Play
Pause
≥ Surround sound effect and sound mode are available (> 26).
You can use the remote control to operate the iPod/iPhone
menu.
The operation may vary among iPod/iPhone models.
≥ [3, 4]: To navigate menu items
≥ [OK]: To go to the next menu.
≥ [RETURN]: To return to the previous menu.
VQT2W23
35
SCBTT755_350EBGN_VQT2W23.book 36 ページ 2010年7月8日 木曜日 午後6時53分
Enjoying VIERA CAST
Playback menu
You can access a selection of Internet services from the Home
screen with VIERA CAST, for example YouTube, Picasa Web
Albums. (Current as of June 2010)
1
2
Advanced operations
Disc
Play
Picture
Sound
≥ Network connection (> 19)
≥ Network setting (> 22)
2
Press [DISPLAY].
e.g., BD-Video
Preparation
1
Press [BD/SD] to select “BD/DVD”.
Press [VIERA CAST].
Signal Type
Subtitle
Off
Subtitle Style
Menus
Items
-
Main
1ENG
Angle
-
Settings
Message is displayed. Please read these instructions
carefully and then press [OK].
3
Press [3, 4, 2, 1] to select the item and
press [OK].
Press [3, 4] to select the menu and press
[1].
4
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN], coloured buttons, number
buttons
Press [3, 4, 2, 1] to select the item and
press [1].
5
Press [3, 4] to select the setting.
VIERA CAST Home screen;
Weather
London, United Kingdom
Setup & Help
NW 10
km/h
12°
TOMORROW
H
L
19°
12°
XXXXXX
XXXXXX
Featured Photos
Featured Videos
MORE
XXXXXX
BACK
COMING SOON
Images are for illustration purposes,
contents may change without notice.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped,
etc.) and media contents, there may be some items that
you cannot select or change.
Regarding Language, Audio attribute and Video attribute:
(> 50)
Disc
Signal Type
Primary Video
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR].
≥ When the Blu-ray disc logo is selected on the Home screen,
the playback source will be changed and go back to the
source previously selected.
≥ In the following cases, settings are possible using “Internet Content
Settings” (> 42)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed correctly.
A high-speed Internet service with a speed of at least 6 Mbps is
recommended.
≥ Be sure to update the firmware when a firmware update notice is displayed
on the screen. If the firmware is not updated, you will not be able to use the
VIERA CAST function. (> 23)
≥ VIERA CAST home screen is subject to change without notice.
≥ The services through VIERA CAST are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.
Video
The recording method of original video
appears.
Soundtrack
Select the type of audio or language.
Secondary Video
Video
Select on/off of images. The recording
method of original video appears.
Soundtrack
Select on/off of audio and the language.
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(> 27, “Changing audio”)
Angle
Select the number of the angle.
VQT2W23
36
Some items may be changed only on the disc specific menu.
(> 27)
SCBTT755_350EBGN_VQT2W23.book 37 ページ 2010年7月8日 木曜日 午後6時53分
Play
Sound
Repeat Play
Sound Effects*1, *2
(Only when the elapsed time is being displayed on the unit’s
display.)
Select the item which you want to repeat. The items displayed
differ depending on the type of media.
(Discs recorded at 48 kHz or less)
This feature gives you brighter sound by increasing the high
frequency portion of the audio.
Select “Off” to cancel.
Random
Select whether or not to play random.
Graphic Display Level
(Only when “Full HD” is selected in “3D Type” (> 41).)
Pop-up position for the play back menu or message screen
etc. can be adjusted during 3D playback.
Picture
Mode
Select the picture quality mode during play.
Detail Clarity
Re-master 1
Pop and rock
Re-master 2
Jazz
Re-master 3
Classical
Dialog Enhancer*1
The volume of the centre channel is raised to make dialog
easier to hear.
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity
Sound” (> 40)
*1
*2
When audio is output from the HDMI AV OUT terminal this function is
effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” is set to “PCM”. (> 40)
This function has no effect when the type of audio is Dolby Pro Logic II.
The picture is sharp and detailed.
Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
≥ If the video is disrupted when “Auto” is selected, select either
“Video” or “Film” depending on the material to be played
back.
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
≥ Only when you have selected “On” in “24p Output” (> 41)
and play discs recorded at a rate of 60 fields per second.
Advanced operations
24p
VQT2W23
37
SCBTT755_350EBGN_VQT2W23.book 38 ページ 2010年7月8日 木曜日 午後6時53分
DLNA feature
You can enjoy music, video and pictures contents saved on a
DLNA Certified media server (such as a PC with Windows 7
installed etc.) connected to the home network with this unit.
You also can enjoy viewing them with Panasonic DLNA
compatible recorders (DIGA).
≥ The countries where DIGA is available are limited. Refer to
following site for availability.
http://panasonic.jp/support/global/cs/
Enjoy contents on the
equipment connected to this
unit via the network
1
2
Press [START].
3
Press [3, 4] to select “Home Network
(DLNA)” and press [OK].
≥ For the operation of equipment connected to the network,
refer to their respective operating instructions.
≥ Not compatible with certain audio, video and image files.
Press [3, 4] to select “Network” and press
[OK].
≥ A list of equipment connected via the network is
displayed.
≥ This list can be updated by pressing the red button on
the remote control.
Preparation
1 Perform network connection (> 19) and network setting
(> 22) of this unit.
2 Perform Home Network settings of the PC or DIGA.
e.g.
Home Network (DLNA)
DIGA
When connected to a PC with Windows 7 installed
≥ Add the contents and folder to the libraries of PC.
≥ Playlist of Windows Media® Player can play back only
the contents that are stored in the libraries.
Regarding setting method of Windows 7, refer to its
instructions or help.
OK
RETURN
DIGA
PC name
Servers found on the network are displayed.
Please select one.
Update
When connected to a Panasonic DLNA compatible
recorder (DIGA)
4
When a message requesting operation of the equipment to
be registered is displayed, perform the operations in steps
1-4 of “Enjoy contents on the equipment connected to this
unit via the network” (> right).
Press [3, 4] to select the equipment to
playback the contents, and press [OK].
5
Press [3, 4, 2, 1] to select the item to
playback (folder), and press [OK].
≥ Menu structure will be different depending on the
equipment connected to this unit. Select the contents by
repeating the operation.
≥ Control Panel is displayed once the playback starts.
Operation can be performed with [3, 4, 2, 1], [OK]
and [EXIT].
Control Panel
e.g.

EXIT
≥ Press [OK] if the Control Panel is not displayed.
≥ Press [RETURN] to hide the Control Panel.

≥
≥
≥
≥

A
B
C
D
VQT2W23
38

Broadband router, Wireless router (Access point), etc.
LAN Cable (Straight)
Internet
DLNA Certified media server
Depending on the equipment, playback of pictures may not be possible.
Items displayed in grey on the display cannot be played back by this unit.
This unit cannot be played back via connected equipment.
Depending on the performance of the connected PC, video frames may be
dropped during playback, or video may not playback at all.
SCBTT755_350EBGN_VQT2W23.book 39 ページ 2010年7月8日 木曜日 午後6時53分
Useful functions for when
playing back pictures
The following operations are possible when playing back
pictures from connected equipment.
While contents list is displayed
1 Press [OPTION].
2 Select an item, then press [OK].
Slideshow
Settings
2
Press [3, 4] to select “Setup” and press
[OK].
Setup
Disc
Picture
Sound
Display
TV / Device Connection
Network
General
1 Press [OPTION].
≥ If OPTION menu is not displayed, press [OPTION]
again.
2 Select an item, then press [OK].
Rotate LEFT
(except for
slideshow)
Press [START] and press [3, 4] to select
“To Others” and press [OK].
Interval
Change the display interval.
Repeat Play
Repeat slideshow.
While playing
Rotate
RIGHT
(except for
slideshow)
1
You can display still pictures one by one at a
constant interval.
Press [3, 4, 2, 1] to select “Set” and
press [OK].
Status
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
Show the picture properties (> 30).
OK
RETURN
3
Press [3, 4] to select the menu and press
[OK].
4
Press [3, 4] to select the item and press
[OK].
If there are any other items, repeat these steps.
5
Press [3, 4, 2, 1] to select the option and
press [OK].
≥ There may be differences in operation methods. If this
happens, follow the on-screen instructions for the operation.
Rotate the still picture.
About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” (> 42)
Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is
shown.
Advanced operations
Start
Slideshow
Setup menu
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is
shown.
Playback method for 3D disc
Select the playback method of 3D compatible video software.
3D Playback Message
Set to display or hide the 3D viewing warning screen when
playing back the 3D compatible video software.
VQT2W23
39
SCBTT755_350EBGN_VQT2W23.book 40 ページ 2010年7月8日 木曜日 午後6時53分
Soundtrack Preference
Sound
Choose the language for audio.
≥ If “Original” is selected, the original language of each disc
will be selected.
≥ Enter a code (> 50) with the number buttons when you
select “Other ¢¢¢¢”.
Dynamic Range Compression
Subtitle Preference
Digital Audio Output
Choose the language for the subtitle.
≥ If “Automatic” is selected and the language selected for
“Soundtrack Preference” is not available, subtitles of that
language will automatically appear if available on that disc.
≥ Enter a code (> 50) with the number buttons when you
select “Other ¢¢¢¢”.
Menu Preference
Choose the language for the disc menus.
≥ Enter a code (> 50) with the number buttons when you
select “Other ¢¢¢¢”.
BD-Live Internet Access (> 28)
You can restrict Internet access when BD-Live functions are
used.
≥ If “Limit” is selected, Internet access is permitted only for
BD-Live contents which have content owner certificates.
DivX Subtitle Text
Select a suitable item according to the language used for DivX
subtitles text (> 29).
≥ This item is displayed only after playing back a file.
Picture
Still Mode
Select the type of picture shown when you pause playback.
Automatic Automatically selects the type of picture shown.
Field
Select if jittering occurs when “Automatic” is
selected.
Frame
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
Seamless Play
The chapter segments in playlists are played seamlessly.
≥ Select “On” when the picture freezes for a moment at the
chapters segment in playlists.
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.
You can listen at low volumes but still hear dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
MPEG Audio
Select the audio signal to output.
≥ Select “PCM” when the connected equipment cannot
decode the respective audio format.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 28)
≥ If “Off” is selected, the unit outputs the primary audio only.
Digital Audio Input
Press [OK] to show the following settings:
PCM-Fix
Select the audio signal to input.
≥ “On”: PCM is available.
≥ “Off”: PCM and Dolby Digital are available.
Select “On” if the sound is cut off intermittently.
Downmix
Select the downmix system to enjoy multi-channel or
2-channel sound.
≥ Select “Surround encoded” to enjoy the surround sound.
≥ There is no downmix effect on the bitstream audio signal.
≥ The audio will be output in “Stereo” in the following cases.
jAVCHD playback
jPlayback of secondary audio (including the button click
sound).
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded
and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the original number
of channels.
(Note that in the case of 6.1ch audio, playback will be at
5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
Playback menu to “On”. (> 37)
Audio Delay
Mis-sync between the video and audio is corrected by delaying
the audio output.
VQT2W23
40
Speaker
Refer to page 43
SCBTT755_350EBGN_VQT2W23.book 41 ページ 2010年7月8日 木曜日 午後6時53分
On-Screen Messages
Choose whether to show status messages automatically.
On-Screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
When this is set to “On”:
If there is no operation for 5 minutes or more, the displayed
screen switches to the other states automatically.
≥ While playing and pausing, etc., this function is not available.
≥ While playing music (CD-DA or MP3), after about 5 minutes
DIRECT NAVIGATOR screen switches to a blank screen
with “Screen Saver” message.
FL Display
Changes the brightness of the unit’s display.
≥ If “Automatic” is selected, the display is dimmed but
brightens when you perform some operations.
Software Licence
Information about the software used by this unit is displayed.
TV / Device Connection
3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when “Side by
side” is selected.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
4:3
The sides are cut off so
the picture fills the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
Black bands appear at the
4:3 Letterbox top and bottom of the
picture.
When connected to a 16:9 widescreen television and playing
4:3 ratio image:
16:9
Video is displayed as a 4:3 ratio image in the
centre of the screen.
HDMI Connection
is connected to an HDTV through other equipment, it
must also be 1080p compatible.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then set “24p”
in “Picture” (> 37) to “On”
≥ When BD-Video images other than 24p are played,
images are output at 60p.
HDMI Colour Mode
This setting is for selecting colour-space conversion of the
image signal when the unit is connected using an HDMI
cable.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Audio will be output through the system's speakers when
“Off” is selected.
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI
Control”.
Deep Colour Output
This setting is for selecting whether to use Deep Colour
Output when a television that supports Deep Colour is
connected.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Power Off Link
Select the desired power off link setting of this unit for
VIERA Link operation (> 34). (This works depending on
the settings of the connected VIERA Link “HDAVI Control”
compatible equipment.)
Video/Audio:
When the TV is turned off, this unit will turn off
automatically.
Video:
When the TV is turned off, this unit will turn off except
during the following conditions:
jCD or MP3 audio playback
jiPod/iPhone mode
jRadio mode
j“AUX”, “ARC” or “D-IN” (DIGITAL IN) mode
(non-selected TV AUDIO setting for VIERA Link)
j“D-IN” (DIGITAL IN) mode (non-selected CABLE/
SATELLITE AUDIO setting for VIERA Link)
Advanced operations
Display
Press [OK] to show the following settings:
TV Audio Input
HDMI Video Format
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
≥ If “Automatic” is selected, automatically selects the
output resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p,
you need to connect the unit directly to 1080p
compatible HDTV (High Definition Television). If this unit
Select the TV audio input to work with the VIERA Link
operations.
VQT2W23
41
SCBTT755_350EBGN_VQT2W23.book 42 ページ 2010年7月8日 木曜日 午後6時53分
TV System
Change the setting to match the equipment you are connecting
with.
≥ When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
Network
Network Easy Setting (> 22)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard
will be displayed.
IP Address / DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
Remote Control
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start*
Speed of startup from standby mode is increased.
≥ Internal control unit will be powered when it is set to “On” so
compared to when the setting is “Off” the following will occur.
jIdle power consumption will increase. (about the power
consumption > 53)
*Depending on the power conserving setting activated on the
TV, this function may have less effect when the unit is
started by the power on link function. (> 33)
Easy setup (> 21)
You can execute basic settings to optimize your home theatre
system.
Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control”, “LAN Connection Mode”,
“Access Point Connection Setting”, “IP Address / DNS
Settings”, “Proxy Server Settings”, “Lock”, “DVD-Video
Ratings” and “BD-Video Ratings” etc. to the default settings.
DivX Registration (> 29)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
≥ “Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.
Display firmware version of this unit and wireless LAN module
of optional Wireless LAN Adaptor.
Proxy Server Settings
Firmware Update (> 23)
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (> 36) (VIERA CAST)
Press [OK] to show the following settings:
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions. Enter the 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function effect will not
work.
≥Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
Summer Time
≥Select “On” when using Daylight Saving time.
VQT2W23
42
General
MAC Address
Displays the MAC address of this unit.
Press [OK] to show the following settings.
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
You can update the firmware manually.
SCBTT755_350EBGN_VQT2W23.book 43 ページ 2010年7月8日 木曜日 午後6時53分
Speaker settings
)
ms
0.0
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
If either distance A or B is less than C (> below), find the
difference in the relevant table and adjust the delay time to
make up for the difference.
A
C
C
L
:
B
C
:
C
B
RS
ms
0.0
C
Complete

dB
0
dB
0
dB
0
Test
ms
0.0
Approx. 510 cm
15.0 ms
1
Select “Test” and press [OK].
2
While listening to the test signal
Press [3, 4] to adjust the volume of each
speaker.
The volume can be adjusted between r6 dB and s6 dB.
≥ Set each speaker level according to the volume of the
Front (L) and Front (R) speaker volume respectively.
Press [OK].
The test signal stops.
SW
RS
ms
0.0
L


A Centre (C)
B Left Surround (LS), Right Surround (RS)
e.g., 7.1ch setting
ms
0.0
L
C
Complete
dB
0
dB
0
dB
0
Test
ms
0.0
2
LB
C
Complete
dB
0
dB
0
dB
0
Test
LS
ms
0.0
R
SW
dB
0
RS
R
A Centre (C)
B Test
C Left Surround (LS), Right Surround (RS)
SW
dB
0
LS


e.g., 5.1ch setting
dB
0
LS
)
A test signal is output.
3
R
dB
0
(Effective when playing multi-channel audio)
e.g., 5.1ch setting
L
10.0 ms
Volume (Channel balance) (
Press [3, 4, 2, 1] to select the distance
box ( ms
0.0 ) and press [OK].

Approx. 340 cm
Adjusting speaker level
A B C: Primary listening distance
A Approximate room dimensions
B Actual speaker position
C Ideal speaker position
D Circle of constant primary listening distance
1
5.0 ms
D
RS
LS
Approx. 170 cm
∫ When using the 7.1ch speaker system
SW
LS
Setting
1 Check the distance difference of both the front speakers
and the surround back speakers from the seating position.
2 Set the delay time of the surround back speakers.
R
A
Difference
Advanced operations
Delay time (
B Surround speakers / Surround back speakers
RS
dB
0
ms
0.0
dB
0
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
RB
C Left Surround back (LB), Right Surround back (RB)
Press [3, 4] to select the setting and press
[OK].
A Centre speaker
Difference
Setting
Approx. 34 cm
1.0 ms
Approx. 68 cm
2.0 ms
Approx. 102 cm
3.0 ms
Approx. 136 cm
4.0 ms
Approx. 170 cm
5.0 ms
VQT2W23
43
SCBTT755_350EBGN_VQT2W23.book 44 ページ 2010年7月8日 木曜日 午後6時53分
Speaker installation
option
Optional speaker settings
[BTT755]: Centre speaker

You can attach all of the speakers (except subwoofer) to a
wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
≥ Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
1
Drive a screw (not supplied) into the wall.



2

A
B
C
D
E
At least 30 mm
‰ 4.0 mm
‰ 7.0 mm to 9.4 mm
Wall or pillar
5.5 mm to 7.5 mm
I
J
K
L
M
N

∫ To avoid speaker dropping
[BTT755]: Front speaker, Centre speaker, Surround speaker
e.g., [BTT755] Front speaker

Fit the speaker securely onto the screw(s)
with the hole(s).
DO NOT


DO
≥ Move the speaker so
that the screw is in this
position.
[BTT755]: Front speaker, Surround speaker
Attach to a wall without the base and the stand.


[BTT350]:
Front speaker, Surround speaker
44

18.8 mm
117 mm
209 mm to 211 mm
97 mm
17 mm
99 mm to 101 mm

≥ In this position, the speaker
will likely fall if moved to the
left or right.
F 97 mm
G 210 mm to 212 mm
H 26 mm

[BTT350]: Centre speaker
e.g., [BTT755] Front speaker
VQT2W23


Attaching to a wall


A
B
C
D
String (not supplied)
Screw eye (not supplied)
Less than 10 cm
Rear of the speaker
≥ Consult a qualified building contractor to avoid damage to
the wall or speakers.
≥ Use a string of less than ‰ 2.0 mm, which is capable of
supporting over 10 kg.
SCBTT755_350EBGN_VQT2W23.book 45 ページ 2010年7月8日 木曜日 午後6時53分
Troubleshooting guide
Reference
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies. (> 23)
4
Make the following checks.
If the problem remains unresolved, consult your
dealer for instructions.
The following do not indicate a problem with this unit:
≥ Regular disc rotating sounds.
≥ Image disturbance during search.
≥ Image disturbance when replacing 3D discs.
∫ Unit doesn’t respond to remote control or
front panel buttons.
Press and hold [Í/I] on the main unit for 5 seconds.
jIf still unable to turn the unit off, disconnect the AC mains
lead, wait 1 minute, then reconnect the AC mains lead.
∫ Cannot eject disc.
The unit may have a problem.
While the unit is off, press and hold [SKIP9] on the remote
control and [< OPEN/CLOSE] on the unit at the same time for
more than 5 seconds.
General operation
To return to the factory preset.
≥ Select “Yes” in “Default Settings” in the Setup menu. (> 42)
To return all settings to the factory preset.
≥ Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], [< OPEN/
CLOSE] and [Í/I] on the main unit at the same time for more
than 5 seconds.
The remote control doesn’t work properly.
≥ The remote control and main unit are using different codes.
Change the code on the remote control. (> 24)
≥ It may be necessary to set the code of the remote control again
after changing the batteries for the remote control. (> 24)
Disc cannot be played.
≥ The disc is dirty. (> 7)
≥ Check the region code.
Still pictures (JPEG) do not playback normally.
≥ The images that were edited on the PC, such as Progressive
JPEG, etc., may not playback.
The TV tuner mode is not displayed when the TV is
switched on.
≥ This phenomenon may occur, depending on the TV setting,
when “Quick Start” is set to “On”.
≥ Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
The contents of the USB device cannot be read.
≥ If inserted during playback, the USB device may not be
recognised by this unit.
Power
No power.
≥ Insert the AC mains lead securely into a household mains
socket. (> 20)
The unit switches to standby mode.
≥ When the time set for the sleep timer has passed, the main
unit will be turned off. (> 8)
≥ One of the unit’s safety devices is activated. Press [Í/I] on
the main unit to turn the unit on.
The main unit is turned off when the input for the TV is changed.
≥ This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.
Displays
The display is dim.
≥ Change “FL Display” in the Setup menu. (> 41)
TV screen and video
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
≥ An incorrect resolution is selected in “HDMI Video Format”.
Reset the setting as follows:
While the disc tray is empty and “BD/DVD” is selected as a
source, press and hold [1] (Play) and [∫] (Stop) on the main unit
at the same time for more than 5 seconds to cancel the setting.
≥ When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select “Yes” in “Default Settings”
and make proper settings. (> 42)
≥ The unit and television are using different video systems.
While stopped, keep pressing [∫] (Stop) and [< OPEN/
CLOSE] on the main unit for 5 or more seconds. The system
switches from PAL to NTSC or vice versa.
≥ The system used on the disc doesn’t match your television.
jPAL discs cannot be correctly viewed on an NTSC television.
jThis unit can convert NTSC signals to PAL60 for viewing on
a PAL television (“NTSC Contents Output” in the “Picture”).
≥ When “Playback method for 3D disc” in the Setup menu is
set to “3D Playback”, images may not output depending on
the connection method. Remove the disc from this unit and
select “2D Playback”.(> 39)
When playing back a 3D disc, audio can be heard but no
video image on the TV.
≥ Change the video input mode to the suitable HDMI video
input mode on the TV.
Optional speaker
settings
Do you have the latest firmware installed?
Reference
Before requesting service, please perform the
following steps.
You have forgotten your ratings password.
You want to cancel the ratings level.
While the disc tray is empty and “BD/DVD” is selected as a
source, press and hold [SKIP:] on the remote control and
[1] (Play) on the unit at the same time for more than 5
seconds. The ratings level returns to the factory preset.
VQT2W23
45
SCBTT755_350EBGN_VQT2W23.book 46 ページ 2010年7月8日 木曜日 午後6時53分
Video is not output.
≥ Set the “High Clarity Sound” in the Playback menu to “Off” to
use the VIDEO OUT terminal. (> 37)
Video is not output in high-definition.
≥ Confirm that “HDMI Video Format” in the Setup menu is set
properly. (> 41)
3D video is not output.
≥ Are the settings on this unit and the TV correct? (> 17)
3D video is not output correctly as 2D.
≥ Is the “Playback method for 3D disc” set to “2D Playback”?
(> 39)
≥ Discs that have recorded titles with Side by side (2 screen
structure) which can be enjoyed in 3D are played back in
accordance with the settings of the TV.
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
≥ Confirm the “TV Aspect” is set properly. (> 41)
≥ Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 28) on the unit is also
possible.)
[For[the[United[Kingdom[and[Republic[of[Ireland[
After choosing “Home Cinema” in “Speaker Selection”
with the TV’s remote control, the TV’s input selection also
changes.
≥ Disconnect the HDMI cable from the TV and reconnect it to a
different HDMI IN terminal.
Sound
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
≥ Check connections to speakers and other equipment. (> 12,
13,15s20)
≥ Ensure the speaker settings for your speakers are correct. (> 43)
≥ To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. (> 41)
≥ When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (> 37)
≥ Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
≥ The multi-channel audio from a device connected to the TV
is not output in it’s original multi-channel form.
jIf the device has an optical audio output terminal, connect
the device to this unit’s “OPTICAL” terminal. (> 17, 32)
VQT2W23
46
No surround sound.
≥ Press [SURROUND] to select a surround effect. (> 26)
≥ [BTT755[for[Australia[and[New[Zealand]
Ensure that the surround selector switch is set in the centre
position. Then, turn the wireless system off and then back
on.
≥ (When using the 7.1ch speaker system)
Audio is not available from the surround back speakers even
though Dolby Pro Logic II turns on.
Cannot switch audio.
≥ When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or
“MPEG Audio” to “PCM”. (> 40)
No sound from the TV.
≥ Press [EXT-IN] to select the corresponding source. (> 25)
≥ The ARC (Audio Return Channel) function is not available.
Instead, use an optical digital audio cable or an audio cable
to have the TV sound. (> 16, 17)
≥ If the TV is not ARC compatible and only the HDMI connection
is used, an extra audio connection is necessary (> 16, 17).
≥ If there is no sound from the equipment connected to this
unit’s DIGITAL AUDIO IN terminal, please make sure that
the optical audio output of the equipment is set to PCM.
iPod/iPhone operation
Cannot charge or operate.
≥ Check that the iPod/iPhone is connected firmly. (> 34)
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
Cannot display iPod/iPhone videos/photos on the TV.
≥ Make sure that TV is connected to the VIDEO OUT terminal
on this unit. (> 16)
≥ Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI input.
≥ When the main unit is connected with an “HDAVI Control”
compatible TV and VIDEO IN is selected for iPod/iPhone
video or photo playback, the TV input channel will
automatically change to the HDMI input channel when
[START] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Radio
Distorted sound or noise is heard.
≥ Adjust the position of the antenna.
≥ Use an outdoor antenna. (> 18)
A beat sound is heard.
≥ Try to keep a certain amount of distance between the
antenna and the TV.
SCBTT755_350EBGN_VQT2W23.book 47 ページ 2010年7月8日 木曜日 午後6時53分
Wireless system (SH-FX71)
[BTT755[for[Australia[and[New[Zealand]
No power.
≥ Ensure the AC mains lead of the wireless system is
connected properly.
The wireless link indicator (e.g., “ [W] ”) is flashing.
≥ There is no link between the main unit and the wireless
system. Turn the wireless system off and then back on.
Alternatively, turn the wireless system off, disconnect the AC
mains lead and then reconnect it.
The wireless link indicator (e.g., “ [W] ”) does not light.
≥ Check that the main unit is turned on, and the wireless
system is turned on.
≥ Ensure that the digital transmitter is fully inserted into the slot
of the main unit. (> 18)
The wireless link indicator keeps flashing between red and
green.
≥ There is a power supply problem. Consult the dealer.
Other difficulties with playback
BD-Video or DVD-Video is not played.
≥ Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (> 11)
≥ You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (> 39)
≥ Some BD-Video can only be output with HDMI.
I can’t play back BD-Live.
≥ The SD card is write-protected. (> 11)
≥ Confirm that this unit is connected to the broadband Internet. (> 19)
≥ Confirm the “BD-Live Internet Access” settings. (> 40)
≥ Confirm an SD Card is inserted into the SD Card slot. (> 24)
Alternative soundtrack and subtitles cannot be selected.
≥ The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (> 27)
Angle cannot be changed.
≥ Angles can only be changed during scenes where different
angles are recorded.
Network
I can’t connect to the network.
≥ Confirm the network connection and settings. (> 19, 42)
≥ Check the operating instructions for each device and
connect accordingly.
When using Wireless LAN connection, video or audio from the
DLNA Certified media server is played back intermittently, not
played back or video frames are dropped during playback.
≥ Higher transfer rate router such as 802.11n (2.4 GHz or 5 GHz)
Wireless router (Access Point) may solve the problem. If you use
802.11n (2.4 GHz or 5 GHz) Wireless router (Access Point), it is
necessary to set the encryption type to “AES”.
Simultaneous use with a microwave, cordless telephone etc. at
2.4 GHz may result in connection interruptions or other problems.
≥ On the “Access Point Connection Setting” screen (> 42), the
continuous lighting of at least 4 “Reception” indicators is the
target for a stable connection. If 3 or fewer indicators are lit or
the connection is being interrupted, change the position or angle
of your Wireless router (Access point) and see if the connection
state improves. If there is no improvement, connect to a wired
network and perform the “Network Easy Setting” (> 22) again.
Reference
The contents of the USB device cannot be read.
≥ USB devices connected using USB extension cable other
than the supplied with the Wireless LAN Adaptor DY-WL10
(optional) or a USB hub may not be recognised by this unit.
VQT2W23
47
SCBTT755_350EBGN_VQT2W23.book 48 ページ 2010年7月8日 木曜日 午後6時53分
Messages
The following messages or service numbers appear on the
television or unit’s display when something unusual is detected
during startup and use.
On the television
Cannot play.
≥ You inserted an incompatible disc.
Cannot play on this unit.
≥ You tried to play a non-compatible image.
No disc is inserted.
≥ The disc may be upside down.
$ This operation is not available.
≥ Some operations are unsupported by the unit. For example;
jBD-Video: During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
IP address is not set.
≥ The “IP Address” in “IP Address / DNS Settings” is “---. ---.
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address acquisition if
necessary.)
(When using the optional wireless LAN adaptor: DY-WL10)
The current security setting of Wireless LAN is low. It is
recommended to change the setting.
≥ Authentication type for the Wireless LAN is set to “Open
system”, or the encryption type is set to “No encryption”. It is
recommended to encrypt for safety reasons. For details,
refer to the instructions of the Wireless router being used.
Encryption is required when playing back video, etc., from
DLNA compatible devices.
No Video
≥ Depending on the connected iPod/iPhone, video menu may
not be available on the TV. Select “ALL” on the unit’s display
and operate video playback from your iPod/iPhone menu.
(> 35)
On the unit’s display
F99
≥ The unit fails to operate properly. Press [Í/I] on the main
unit to switch the unit to standby for 3 seconds. Now press
[Í/I] on the main unit again to turn the unit on.
U59
≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the
unit. Do not block the ventilation hole on the rear and side of
the unit.
VQT2W23
48
U72
U73
≥ The HDMI connection acts unusually.
jTurn the unit and TV off.
jDisconnect the HDMI cable between the player and the
TV.
HDMI ONLY
≥ Some BD-Video discs can only be output with HDMI.
NET
≥ Displays while VIERA CAST is starting up.
No PLAY
≥ There is a viewing restriction on a BD-Video or DVD-Video.
(> 39)
No READ
≥ The media is dirty or badly scratched. The unit cannot play.
PLEASE WAIT
≥ The unit is carrying out internal process. This is not a
malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.
REMOVE
≥ The USB device is drawing too much power. Remove the
USB device.
SET 
(“ ” stands for a number.)
≥ The remote control and main unit are using different codes.
Change the code on the remote control. (> 24)
H or F
(“ ” stands for a number.)
≥ Check and correct the speaker cable connections.
≥ There is something unusual.
≥ Check the unit using the troubleshooting guide. If the service
number does not disappear, do the following.
1 Disconnect the plug from the household mains socket, wait
a few seconds, then reconnect it.
2 Press [Í/I] to turn the unit on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
UPD/
(“ ” stands for a number.)
≥ The firmware is being updated.
Please do not turn off the unit.
[BTT755[for[Australia[and[New[Zealand] “[W]” is flashing.
≥ There is no link between this unit and the wireless system.
Check that the wireless system is plugged into the
household mains socket and is turned on.
≥ Ensure that the digital transmitter is fully inserted into the slot
of this unit.
≥ If the wireless system is not used, disconnect the digital
transmitter from this unit.
IPOD OVER CURRENT ERROR
≥ The iPod/iPhone is drawing too much power. Remove the
iPod/iPhone, and turn the unit off and on again.
START
≥ The system is being restarted during the firmware update.
Please do not turn the unit off.
FINISH
≥ The firmware update is completed.
NOT CONDITIONAL
≥ The requested operation cannot be conducted.
SCBTT755_350EBGN_VQT2W23.book 49 ページ 2010年7月8日 木曜日 午後6時53分
MP3
File format
MP3
Extension
Files must have the extension “.mp3” or “.MP3”.
Subtitles text file of DivX
File format
Subtitles text file of DivX
MicroDVD, SubRip, or TMPlayer
Extension
Files must have the extension “.SRT”,
“.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”
Reference
≥ The DivX video file and subtitles text file
are inside the same folder, and the file
names are the same except for the file
extensions.
≥ Depending on the methods used to
create the file or the state of the
recording, only parts of the subtitles may
be displayed, or the subtitles may not be
displayed at all.
≥ If a file extension is “.mkv” or “.MKV”, you
can not display the subtitle text.
Compression rate 32 kbps to 320 kbps
Sampling rate
44.1 kHz/48 kHz
Reference
ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)
JPEG
File format
JPEG
Extension
Files must have the extension “.jpg” or “.JPG”.
Picture
resolution
between 34k34 and 8192k8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
Reference
JPEG conforming DCF* is supported.
≥ MOTION JPEG and Progressive JPEG is
not supported.
AVCHD
File format
Codec
* Design rule for Camera File system: unified standard
established by Japan Electronics and Information
Technology Industries Association (JEITA).
≥ DVD-RAM must conform to UDF 2.0.
≥ BD-RE must conform to UDF 2.5.
Extension*
≥ Discs must conform to UDF 2.5.
MPEG2
SD-Video format* used on Standard
Definition Video Camera
(Panasonic and some others)
DivX
Codec
MPEG2
Files must have the extension “.DIVX”,
“.divx”, “.AVI” or “.avi”
* SD-Video Entertainment Video Profile
Picture resolution Up to 1920k1080 pixels
Reference
MPEG-4 AVC/H.264
File format
DivX
File format
AVCHD format (V1.0) used on High
Definition Video Camera
(Panasonic and some others)
≥ DivX certified to play DivX video up to HD
1080p, including premium content.
Video
jNumber of stream: Up to 1
jCodec*: MPEG-4 SP (Simple Profile),
MPEG-4 ASP (Advanced Simple Profile)
jFPS (Frame Per Second)*: Up to 60 fps
Audio
jNumber of stream: Up to 8
jFormat*: MP3, MPEG, Dolby Digital
jMulti channel: Dolby Digital is possible.
MPEG multi is 2 ch conversion.
≥ GMC (Global Motion Compensation) is not supported.
* The following (DivX Plus HD) is added to the above DivX
specification.
Extension
: “.MKV” or “.mkv”
Video Codec: MPEG-4 AVC/H.264
FPS (Frame Per Second):
From 320k240 to 1920k1080: 30 fps
Specifically at 1280k720: 60 fps
Audio Format: MP3, MPEG, Dolby Digital, AAC
≥ This unit supports DivX files less than 4 GB in a USB
device.
≥ DVD-R and DVD-R DL must conform to UDF 1.02 without
ISO9660 and UDF 1.5 with ISO9660.
≥ BD-R must conform to UDF 2.5.
≥ With certain recording states and folder structures, the play order may
differ or playback may not be possible.
≥ CD-R, CD-RW: ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD): ISO9660 level 1 or 2 (except for
extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with multi-session.
This unit is not compatible with packet writing.
Structure of folders that can be
played in this unit
You can play files on this unit by structure of folders as
shown below. However depending on the method of
writing data (writing software), play may not be in the
order you numbered the folders.
: Folder which can be displayed with this unit
¢¢¢: Numbers
XXX: Letters
*1
*2
*3
Reference
About MP3/JPEG/DivX/
AVCHD/MPEG2 files
¢¢¢: from 001 to 999
¢¢¢: from 100 to 999
XXXXX: 5 figures
¢¢¢¢: from 0001 to 9999
XXXX: 4 figures
VQT2W23
(Continued on next page)
49
SCBTT755_350EBGN_VQT2W23.book 50 ページ 2010年7月8日 木曜日 午後6時53分
Structures of still picture (JPEG) folders
Root
in DVD-R*4/DVD-R DL*4/
CD-R*5/CD-RW*5
Files inside a folder are
displayed in the order they
were updated or taken.
e.g.,
P0000001.jpg
P0000002.jpg
Folder A
P0000003.jpg
P0000004.jpg
P0000005.jpg
Folder B
P0000006.jpg
P0000007.jpg
P0000008.jpg
P0000009.jpg
Folder C
P0000010.jpg
P0000011.jpg
P0000012.jpg
Root
e.g.,
P0000001.jpg
P0000002.jpg
in BD-RE*6/DVD-RAM*4
Folder structure is not
displayed.
JPEG
DCIM
*1
XXXXX*2
XXXX.jpg *3
Supplemental information
∫ Display languages list
Display
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
Language
Display
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Language
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Language
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
∫ Video attribute
Display
Meaning
MPEG-2/MPEG-4 AVC/VC-1
DCIM
Display
Video recording method
∫ Audio attribute
XXXXX *2
XXXX.jpg*3
Display
LPCM/
Root
e.g.,
P0000001.jpg
P0000002.jpg
DCIM
in SD card*4/USB
device*4
Displays JPEG files in all
folders.
Folder structure is not
XXXXX *2
displayed.
XXXX.jpg *3
Folder A
P0000003.jpg
P0000004.jpg
e.g.,
001XXXX.mp3
002XXXX.mp3
001
Folder A
003XXXX.mp3
004XXXX.mp3
005XXXX.mp3
in DVD-R/DVD-R DL/CD-R/
CD-RW/USB device
Prefix the file names with
3-digit numbers in the order
you want to play them.
Folder B
006XXXX.mp3
007XXXX.mp3
008XXXX.mp3
009XXXX.mp3
Folder C
010XXXX.mp3
011XXXX.mp3
012XXXX.mp3
Structure of DivX folders
Root
P0000001.divx
P0000002.divx
e.g.,
Folder A
P0000003.divx
P0000004.divx
P0000005.divx
in BD-R*7/DVD-R*7/DVD-R
DL*7/CD-R*7/CD-RW*7/USB
device*7
Files inside a folder are
displayed in the order they
were updated or taken.
Folder B
P0000006.divx
P0000007.divx
P0000008.divx
P0000009.divx
Folder C
P0000010.divx
P0000011.divx
P0000012.divx
*4
*5
*6
*7
VQT2W23
50
The total combined maximum number of recognizable picture contents
and folders: 3000 picture contents and 300 folders.
The total combined maximum number of recognizable picture contents
and folders: 999 picture contents and 99 folders.
The total combined maximum number of recognizable picture contents
and folders: 9999 picture contents and 300 folders.
The total combined maximum number of recognizable file contents and
folders: 200 file contents and 300 folders.
Meaning
Digital+/
TrueHD/DTS/DTS-ES Mtrx/
DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/
DTS-HD HI RES/DTS-HD MSTR/MPEG
ch (channel)
k (kHz)
b (bit)
Signal type
Number of channels
Sampling frequency
Number of bits
∫ Language code list
Language
Structure of MP3 folders
Root
Digital/
Code
Abkhazian
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Amharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6589
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian:
7577
Catalan:
6765
Chinese:
9072
Corsican:
6779
Croatian:
7282
Czech:
6783
Danish:
6865
Dutch:
7876
English:
6978
Esperanto:
6979
Estonian:
6984
Faroese:
7079
Fiji:
7074
Finnish:
7073
French:
7082
Frisian:
7089
Galician:
7176
Georgian:
7565
German:
6869
Greek:
6976
Greenlandic:
7576
Guarani:
7178
Language
Code
Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
Lingala:
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185
Language
Code
Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic:
7168
Serbian:
8382
Serbo-Croatian: 8372
Shona:
8378
Sindhi:
8368
Singhalese:
8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese:
8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
8469
Thai:
8472
Tibetan:
6679
Tigrinya:
8473
Tonga:
8479
Turkish:
8482
Turkmen:
8475
Twi:
8487
Ukrainian:
8575
Urdu:
8582
Uzbek:
8590
Vietnamese:
8673
Volapük:
8679
Welsh:
6789
Wolof:
8779
Xhosa:
8872
Yiddish:
7473
Yoruba:
8979
Zulu:
9085
SCBTT755_350EBGN_VQT2W23.book 51 ページ 2010年7月8日 木曜日 午後6時53分
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States and
other countries.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide patents issued &
pending.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD
Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.
This item incorporates copy protection technology that is protected by U.S.
patents and other intellectual property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1
patent portfolio license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC Standard and
VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video provider
licensed to provide AVC/VC-1 Video. No license is granted or shall be
implied for any other use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
HDAVI ControlTM is a trademark of Panasonic Corporation.
x.v.ColourTM is a trademark.
VIERA CAST is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation
and Sony Corporation.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License, Version
2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed under the
GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to the terms and
conditions of GPL v2 and LGPL v2.1, as the case may be at
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are copyrighted by
several individuals.
Please refer to the copyright notice of those individuals at
http://www.am-linux.jp/dl/JPRCBW98
The GPL/LGPL software is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to
any third party who contacts us at the contact information provided below,
for a charge no more than our cost of physically performing source code
distribution, a complete machine-readable copy of the corresponding
source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest@am-linux.jp
Source code is also freely available to you and any other member of the
public via our website below.
http://www.am-linux.jp/dl/JPRCBW98
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
Blu-ray DiscTM, Blu-rayTM, Blu-ray 3DTM, BD-LiveTM, BONUSVIEWTM, and
the logos are trademarks of Blu-ray Disc Association.
DivX®, DivX Certified®, DivX PlusTM HD and associated logos are
registered trademarks of DivX, Inc. and are used under license.
YouTube and Picasa are trademarks of Google, Inc.
“Made for iPod” and “Made for
iPhone” mean that an
electronic accessory has been
designed to connect
specifically to iPod, or iPhone,
respectively, and has been
certified by the developer to
meet Apple performance
standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
Reference
Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
VQT2W23
51
SCBTT755_350EBGN_VQT2W23.book 52 ページ 2010年7月8日 木曜日 午後6時53分
Glossary
AVCHD
AVCHD is a new format (standard) for high-definition video
cameras that can be used to record and play high-resolution
HD images.
BD-J
Some BD-Video discs contain Java applications, and these
applications are called BD-J. You can enjoy various interactive
features in addition to playing normal video.
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1
channel) before it is decoded into its various channels.
Deep Colour
This unit incorporates HDMI technology that can reproduce
greater colour gradation (4096 steps) when connected to a
compatible TV.
You can enjoy exceptionally rich, natural-looking colours, with
smooth, detailed gradation and minimal colour banding.
[A lower colour gradation (256 steps), without Deep Colour, will
be reproduced if connected to a TV which does not support
Deep Colour.
The unit will automatically set appropriate output to suit the
connected TV.]
DLNA (Digital Living Network Alliance)
DLNA is a standard that makes DLNA Certified digital
electronics easier and more convenient to use on a home
network.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these
signals can also be multi-channel audio.
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible
using Dolby Digital Plus. BD-Video supports up to 7.1 channel
output.
Dolby Pro Logic II
Dolby Pro Logic II enables you to play stereo sources on 5.1
channel.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that
reproduces the studio master audio. BD-Video supports up to
7.1 channel output.
Down-mixing
This is the process of remixing the multi-channel audio found
on some discs into fewer channels.
DTS (Digital Theater Systems)
This surround system is used in many movie theatres. There is
good separation between the channels, so realistic sound
effects are possible.
VQT2W23
52
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in
movie theatres. Previous DTS Digital Surround-compatible
equipment can play DTS-HD as DTS Digital Surround audio.
BD-Video supports up to 7.1 channel output.
DTS-HD High Resolution Audio
This is a signal format achieved by improving the previous
DTS, DTS-ES and DTS 96/24 formats. It is compatible with
sampling frequency 96 kHz/48 kHz. BD-Video supports up to
7.1 channel output.
DTS-HD Master Audio | Essential
This is a lossless audio format and compatible with 96 kHz/
7.1 ch and 192 kHz/2 ch or less. In addition, faithful
reproduction of the master audio is enabled using lossless
audio encoding technology. BD-Video supports up to
7.1 channel output.
Dynamic range
Dynamic range is the difference between the lowest level of
sound that can be heard above the noise of the equipment and
the highest level of sound before distortion occurs.
Dynamic range compression means reducing the gap between
the loudest and softest sounds. This means you can listen at
low volumes but still hear dialogue clearly.
HDMI (High-Definition Multimedia Interface)
HDMI is a digital interface for consumer electronic products.
Unlike conventional connections, it transmits uncompressed
digital video and audio signals on a single cable.
Local storage
This storage area is used as a destination for sub contents for
playing BD-Live on BD-Video.
LPCM (Linear PCM)
These are a kind of PCM format.
These are uncompressed digital signals, similar to those found
on CDs.
PCM (Pulse Code Modulation)
This is one format for converting analogue audio into digital
audio, enabling you to enjoy digital audio with no hassle.
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive
Panasonic algorithm. Various processing is supported,
including a high-level conversion of the TV scanning format
from interlace to progressive and a high-level conversion of
standard resolution (480i or 576i) video signal to a 1080
High-Definition video signal.
Consequently, this unit is able to provide video of optimal
resolution to the connected TV.
x.v.ColourTM
x.v.ColourTM is a name for devices that are compatible with the
xvYCC format, an international standard for expanded colour
in motion pictures, and that follow the rules for signal
transmission.
You can enjoy vivid colours of wider colour ranges for a more
realistic picture when connected to a TV that supports the
x.v.ColourTM with HDMI cable.
24p
This is a progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie contents
are recorded in 24 frames/second in accordance with the film
materials.
SCBTT755_350EBGN_VQT2W23.book 53 ページ 2010年7月8日 木曜日 午後6時53分
Specifications
FM TUNER SECTION
Power consumption:
100 W
Power consumption in
standby mode
Approx. 0.2 W
Power supply:
AC 220 V to 240 V, 50 Hz
iPod/iPhone Connector:
WIRELESS LAN Connector:
(USB 2.0 standard)
Dimensions (WkHkD):
Mass:
Operating temperature
range:
Operating humidity range:
DC OUT 5 V 500 mA MAX
DC OUT 5 V 500 mA
430 mmk62 mmk287 mm
Approx. 3.5 kg
(Dimensions and Weight do not
include speakers)
0 oC to 40 oC
35 % to 80 % RH
(no condensation)
AMPLIFIER SECTION
RMS TTL POWER OUTPUT: 1000 W
1 kHz, 10 % total harmonic distortion
FRONT:
125 W per ch (3 ≠)
CENTRE:
250 W per ch (6 ≠)
SURROUND:
125 W per ch (3 ≠)
100 Hz, 10 % total harmonic distortion
SUBWOOFER:
250 W per ch (6 ≠)
DIN TTL POWER OUTPUT: 590 W
1 kHz, 1.0 % total harmonic distortion
FRONT:
90 W per ch (3 ≠)
CENTRE:
115 W per ch (6 ≠)
SURROUND:
90 W per ch (3 ≠)
45 Hz to 120 Hz, 1.0 % total harmonic distortion
SUBWOOFER:
115 W per ch (6 ≠)
Preset memory:
30 stations
Frequency range: 87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals: 75 ≠ (unbalanced)
SPEAKER SECTION
FRONT SPEAKERS
[BTT755] SB-HF730
Type:
Woofer:
Tweeter:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
[BTT350] SB-HF230
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
CENTRE SPEAKER
[BTT755] SB-HC730
Type:
Woofer:
Tweeter:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
[BTT350] SB-HC480
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm
CONE TYPEk 2
2.5 cm SEMI-DOME TYPE
3≠
78 dB/W (1 m)
100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz (j10 dB)
255 mmk1024 mmk255 mm
Approx. 2.3 kg
1 WAY 1 SPEAKER Bass-ref.
6.5 cm CONE TYPE
3≠
78 dB/W (1 m)
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
80 mmk118.5 mmk68 mm
Approx. 0.4 kg
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm
CONE TYPEk 2
2.5 cm SEMI-DOME TYPE
6≠
78 dB/W (1 m)
100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz (j10 dB)
424 mmk59 mmk76 mm
Approx. 1.06 kg
1 WAY 1 SPEAKER Bass-ref.
6.5 cm CONE TYPE
6≠
79 dB/W (1 m)
90 Hz to 25 kHz (j16 dB),
115 Hz to 22 kHz (j10 dB)
145 mmk85 mmk71.5 mm
Approx. 0.6 kg
Reference
GENERAL
VQT2W23
53
SCBTT755_350EBGN_VQT2W23.book 54 ページ 2010年7月8日 木曜日 午後6時53分
SURROUND SPEAKERS
[BTT755] SB-HS735
Type:
Woofer:
Tweeter:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
[BTT350] SB-HS230
Type:
Full range:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
SUBWOOFER
[BTT755] SB-HW330
Type:
Woofer:
Passive radiator:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
[BTT350] SB-HW480
Type:
Woofer:
Impedance:
Output sound pressure:
Frequency range:
Dimensions (WkHkD):
Mass:
2 WAY 3 SPEAKER Bass-ref.
3.5 cm k 10 cm
CONE TYPEk 2
2.5 cm SEMI-DOME TYPE
3≠
78 dB/W (1 m)
100 Hz to 30 kHz (j16 dB),
130 Hz to 25 kHz (j10 dB)
255 mmk1024 mmk255 mm
Approx. 2.3 kg
1 WAY 1 SPEAKER Bass-ref.
6.5 cm CONE TYPE
3≠
78 dB/W (1 m)
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
80 mmk118.5 mmk68 mm
Approx. 0.4 kg
1 WAY 1 SPEAKER (Kelton
type)
16 cm CONE TYPE
25 cm
6≠
78 dB/W (1 m)
35 Hz to 180 Hz (j16 dB),
40 Hz to 160 Hz (j10 dB)
180.5 mmk322 mmk351 mm
Approx. 4.6 kg
1 WAY 1 SPEAKER Bass- ref.
16 cm CONE TYPE
6≠
78 dB/W (1 m)
40 Hz to 220 Hz (j16 dB),
45 Hz to 180 Hz (j10 dB)
145 mmk289.5 mmk258 mm
Approx. 2.8 kg
TERMINAL SECTION
USB:
(Front)
USB port power:
Bit rate:
(Rear)
Ethernet:
SD card slot:
USB 2.0 High Speed
DC OUT 5 V 500 mA MAX
Up to 4 Mbps (DivX)
USB 2.0 (Use for Wireless LAN
Adaptor only)
10BASE-T/100BASE-TX 1 system
Connector: 1 system
Audio Input
AUX:
k1
Digital Audio Input
Optical:
k1
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format:
PCM, Dolby Digital
VQT2W23
54
VIDEO SECTION
Signal system:
Video output
Output level:
Output connector:
HDMI AV output
Output format:
Output connector:
PAL/NTSC
1.0 Vp-p (75 ≠)
Pin jack (1 system)
1080p/1080i/720p/480p
Type A (19 pin)
HDMI (with 3D, ARC, Content
Type)
This unit supports “HDAVI Control
5” function.
LASER Specification
Class 1 LASER Product
Wave length:
Laser power:
790 nm (CDs)/655 nm (DVDs)/
405 nm (BDs)
No hazardous radiation is
emitted with the safety
protection
WIRELESS SYSTEM AND
DIGITAL TRANSMITTER
[BTT755[for[Australia[and[New[Zealand]
<AMPLIFIER SECTION>
RMS TTL POWER OUTPUT:
1 kHz, 10 % THD
SURROUND:
DIN TTL POWER OUTPUT:
1 kHz, 1.0 % THD
SURROUND:
<GENERAL>
Power supply:
Power consumption
Digital transmitter:
Wireless system:
Power consumption in off
mode:
Dimensions (WkHkD)
Digital transmitter:
Wireless system:
Mass
Digital transmitter:
Wireless system:
Wireless module
Frequency range:
No. of channels:
250 W
125 W per ch (3 ≠)
140 W
70 W per ch (3 ≠)
AC 220 V to 240 V, 50 Hz
1.2 W
43 W
Approx. 0.3 W
43.3 mmk37.3 mmk8.2 mm
165 mmk91.5 mmk164 mm
Approx. 0.0095 kg
Approx. 0.695 kg
2.4 GHz to 2.4835 GHz
3
Specifications are subject to change without notice.
SCBTT755_350EBGN_VQT2W23.book 55 ページ 2010年7月8日 木曜日 午後6時53分
Index
H
HDMI. . . . . . . . . . . . . . . . . . . . . . 16, 52
High Clarity Sound . . . . . . . . . . 37, 40
I
iPod/iPhone . . . . . . . . . . . . . . . . . . . 34
IP address . . . . . . . . . . . . . . . . . . . . 42
J
JPEG . . . . . . . . . . . . . . . . . . . . . . . . 49
L
LAN . . . . . . . . . . . . . . . . . . . . . . . . . 19
Language
Audio . . . . . . . . . . . . . . . . . . . . . 40
Code list . . . . . . . . . . . . . . . . . . . 50
Menu . . . . . . . . . . . . . . . . . . . . . 40
On-Screen . . . . . . . . . . . . . . . . . 41
Soundtrack . . . . . . . . . . . . . . . . . 36
Subtitle . . . . . . . . . . . . . . . . . 36, 40
Local storage . . . . . . . . . . . . . . . . . 52
LPCM . . . . . . . . . . . . . . . . . . . . . . . . 52
M
Menu
Playback . . . . . . . . . . . . . . . . . . . 36
Pop-up . . . . . . . . . . . . . . . . . . . . 27
Setup . . . . . . . . . . . . . . . . . . . . . 39
MPEG2 . . . . . . . . . . . . . . . . . . . . . . . 49
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 49
Mute the sound . . . . . . . . . . . . . . . . . 8
O
On-Screen
Language . . . . . . . . . . . . . . . . . . 41
Status Message . . . . . . . . . . . . . 27
P
Picture-in-picture . . . . . . . . . . . . . . 28
Playback
AVCHD . . . . . . . . . . . . . . . . . . . . 27
DivX . . . . . . . . . . . . . . . . . . . . . . 29
JPEG . . . . . . . . . . . . . . . . . . . . . 30
MPEG2 . . . . . . . . . . . . . . . . . . . . 27
MP3 . . . . . . . . . . . . . . . . . . . . . . 31
Playlists . . . . . . . . . . . . . . . . . . . . . . 25
Pop-up menu . . . . . . . . . . . . . . . . . . 27
Product Disposal . . . . . . . . . . . . . . . 7
Progressive . . . . . . . . . . . . . . . . . . . 37
Properties
Title. . . . . . . . . . . . . . . . . . . . . . . 28
Still picture . . . . . . . . . . . . . . . . . 30
Proxy Server . . . . . . . . . . . . . . . . . . 42
P4HD . . . . . . . . . . . . . . . . . . . . . . . . 52
Q
Quick Start. . . . . . . . . . . . . . . . . . . . 42
R
Radio . . . . . . . . . . . . . . . . . . . . . . . . 31
Random play . . . . . . . . . . . . . . . . . . 37
Re-master. . . . . . . . . . . . . . . . . . . . . 37
Remote control
Remote control code. . . . . . . . . . 24
Using the remote control. . . . . . . . 7
Repeat play . . . . . . . . . . . . . . . . . . . 37
Resume play function. . . . . . . . . . . 27
S
SD card. . . . . . . . . . . . . . . . . . . . 11, 28
Search . . . . . . . . . . . . . . . . . . . . . . . 27
Setup menu . . . . . . . . . . . . . . . . . . . 39
Skip. . . . . . . . . . . . . . . . . . . . . . . . . . 27
Sleep timer. . . . . . . . . . . . . . . . . . . . . 8
Slideshow . . . . . . . . . . . . . . . . . . . . 30
Slow-motion. . . . . . . . . . . . . . . . . . . 27
Soundtrack . . . . . . . . . . . . . . . . . . . 36
Status Message . . . . . . . . . . . . . . . . 27
Still picture. . . . . . . . . . . . . . . . . . . . 30
Subtitle . . . . . . . . . . . . . . . . . . . . . . . 36
Surround sound . . . . . . . . . . . . . . . 26
V
VIERA CAST . . . . . . . . . . . . . . . . . . 36
VIERA Link “HDAVI ControlTM” . . . 33
W
Whisper-mode Surround . . . . . . . . 26
X
x.v.ColourTM . . . . . . . . . . . . . . . . . . . 52
24p . . . . . . . . . . . . . . . . . . . . 37, 41, 52
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Reference
A
AC mains lead connection. . . . . . . 20
Angle . . . . . . . . . . . . . . . . . . . . . . . . 36
Audio
Attribute . . . . . . . . . . . . . . . . . . . 50
Changing audio during play . . . . 27
Channel . . . . . . . . . . . . . . . . . . . 36
Language . . . . . . . . . . . . . . . . . . 40
AVCHD. . . . . . . . . . . . . . . . . . . . 49, 52
B
BD-J . . . . . . . . . . . . . . . . . . . . . . . . . 52
BD-Live . . . . . . . . . . . . . . . . . . . . . . 28
BD-Video Ratings . . . . . . . . . . . . . . 39
BONUSVIEW . . . . . . . . . . . . . . . . . . 28
C
Chapter . . . . . . . . . . . . . . . . . . . . . . 28
Cleaning
Disc . . . . . . . . . . . . . . . . . . . . . . . 7
Lens . . . . . . . . . . . . . . . . . . . . . . . 7
Main unit. . . . . . . . . . . . . . . . . . . . 7
Connection
Antenna . . . . . . . . . . . . . . . . . . . 18
AUX . . . . . . . . . . . . . . . . . . . . . . 16
Digital transmitter . . . . . . . . . . . . 18
HDMI . . . . . . . . . . . . . . . . . . . . . 17
iPod/iPhone . . . . . . . . . . . . . . . . 34
OPTICAL IN . . . . . . . . . . . . . 16, 17
Set Top Box . . . . . . . . . . . . . . . . 17
Speaker . . . . . . . . . . . . . . . . . . . 15
TV. . . . . . . . . . . . . . . . . . . . . . . . 16
USB . . . . . . . . . . . . . . . . . . . . . . 24
Wireless LAN . . . . . . . . . . . . . . . 19
Wireless system . . . . . . . . . . . . . 14
D
Deep Colour . . . . . . . . . . . . . . . . . . 52
Default Settings . . . . . . . . . . . . . . . 42
Dialog Enhancer . . . . . . . . . . . . . . . 37
DIRECT NAVIGATOR . . . . . . . . . . . 27
Disc and card handling . . . . . . . . . . 7
DivX . . . . . . . . . . . . . . . . . . . . . . . . . 49
DLNA . . . . . . . . . . . . . . . . . . . . . . . . 38
Dolby Digital . . . . . . . . . . . . . . . 40, 52
Dolby Digital Plus . . . . . . . . . . . 40, 52
Dolby Pro Logic II . . . . . . . . . . . 26, 52
Dolby TrueHD . . . . . . . . . . . . . . 40, 52
DTS . . . . . . . . . . . . . . . . . . . . . . 40, 52
DTS-HD . . . . . . . . . . . . . . . . . . . 40, 52
F
Finalize . . . . . . . . . . . . . . . . . . . . . . 11
Firmware update. . . . . . . . . . . . . . . 23
Formatting SD cards . . . . . . . . . . . 28
Frame-by-frame . . . . . . . . . . . . . . . 27
VQT2W23
55
SCBTT755_350EBGN_VQT2W23.book 57 ページ 2010年7月8日 木曜日 午後6時53分
\For\the\United\Kingdom\and\Republic\of\Ireland\customers\
Sales and Support Information
Customer Care Centre
≥ For customers within the UK: 0844 844 3852
≥ For customers within the Republic of Ireland: 01 289 8333
≥ Visit our website for product information
www.panasonic.co.uk
≥ E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
≥ For customers: 0844 844 3856
≥ Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre
Monday–Thursday 9:00 a.m.–5:30 p.m., Friday 9:30 a.m.–5:30 p.m. (Excluding public holidays)
≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com
≥ Most major credit and debit cards accepted.
≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
≥ It couldn’t be simpler!
≥ Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further
details.
EU
EU
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Pb
Panasonic Corporation
Web Site: http://panasonic.net
VQT2W23
Panasonic Corporation 2010
F0710SB0
Download PDF

advertising