Media-Tech MT1073 mice User manual
Add to my manuals4 Pages
The media-tech MT1073 wireless optical mouse provides precise cursor control with adjustable DPI resolution options of 800 and 1600 for enhanced accuracy and sensitivity. Easily navigate the internet with dedicated forward and backward buttons, allowing for a seamless browsing experience.
advertisement
WIRELESS OPTICAL
MOUSE 2.4G
Hi-Res Wireless Optical Mouse
MT1073
Instructions Manual
EN
Package contents
■ Wireless Optical Mouse
■ USB receiver
■ 2 AAA alkaline batteries
■ User manual
System requirements
■ Windows ME, 2000, XP or Vista
■ Free USB Port
Installation
puter system will automatically detect it and prepare it for full operation.
2. The mouse may use then. If the user wrongly operates, please redo the above operating procedures.
Description of keys and DPI adjusting
Left key Right key
Scrolling wheel
Forward
ON/OFF switch
Backward
DPI-adjusting key
Battery cover
Position for storing receiver
Diagram 2
Diagram 1
Installing the battery
1. Remove the battery cover.
2. Insert two AAA batteries into the battery compartment, make sure to properly orient the positive (+) and negative (-) ends as specifi ed by the marks in the battery compartment. Replace the battery cover.
3. Switch on the mouse, the LED in bottom of mouse will blink.
Installing the receiver
1. Insert receiver into USB port of PC, the com-
Using “DPI-adjusting key”
Using “DPI-adjusting key”, the resolution of mouse can be switched between 800DPI and
1600DPI in turn. That LED light in “DPI-adjusting key” blinks slowly indicates 800DPI and fast
1600DPI.
Backward and Frontward keys
Backward and Frontward keys for your easily navigating forward and backward on the Internet.
Low-voltage alarming function
When batteries have been used for some time and discover the LED light in“DPI-adjusting key” blinks automatically, which reminds you that batteries voltage is becoming low, suggested you replace the batteries with new ones.
WIRELESS OPTICAL
MOUSE 2.4G
MT1073
Hi-Res Wireless Optical Mouse
Zawartość opakowania
■ Bezprzewodowa mysz optyczna – 1 szt.
■ Odbiornik USB – 1 szt.
■ Instrukcja obsługi – 1 szt.
■ Bateria alkaliczna – 2 szt.
Instrukcja obsługi
rozpoznane podłącz odbiornik do innego portu
USB. Gdy operacja zakończy się sukcesem Twoja mysz jest gotowa do pracy.
PL
Używanie myszki
Przycisk lewy Przycisk prawy
Wymagania systemowe
■ System operacyjny: Windows ME/2000/XP/Vista
■ Wolny port USB Rolka przewijania
Instalacja
Wprzód
Przycisk CPI
Wstecz
Przełącznik zasilania
Pokrywa baterii
Miejsce na odbiornik
USB
Rys. 2. Odbiornik USB
Rys. 1. Widok spodu myszki
Instalacja baterii
1. Otwórz pokrywę baterii.
2. Włóż dwie baterie AAA zgodnie ze znakami polaryzacji (+/-).
3. Zamknij pokrywę baterii.
4. Przesuń przełącznik zasilania w pozycję ON.
Instalacja odbiornika USB
Podłącz odbiornik USB myszki do wolnego portu USB w komputerze. System Windows automatycznie rozpozna nowe urządzenie HID i zainstaluje mysz. Jeżeli urządzenie nie jest poprawnie
Rys. 3. Widok z góry
Zmiana rozdzielczości
Naciśnij przycisk CPI aby zmienić rozdzielczość sensora między trybami 800 CPI i 1600 CPI.
Zmianę sygnalizuje dioda LED pod przyciskiem
CPI, powolne mruganie oznacza tryb 800 CPI, szybkie mruganie oznacza tryb 1600 CPI.
Przycisk wprzód/wstecz
Podczas korzystanie z przeglądarki WWW przyciśnij „wstecz” aby przejść do poprzedniej strony lub „wprzód” aby przejść do następnej strony.
Oszczędzanie energii
Myszka posiada zaawansowany system oszczędzania energii. Niemniej jednak gdy nie używasz myszki przez dłuższy czas wyłącz ją przesuwając przełącznik zasilania w pozycję OFF.
Gdy baterie są już wyczerpane dioda pod przyciskiem CPI będzie mrugała samoczynnie. Wymień wtedy baterie na nowe baterie alkaliczne AAA.
WIRELESS OPTICAL
MOUSE 2.4G
MT1073
Hi-Res Wireless Optical Mouse
Gebrauchsanleitung
Lieferumfang
■ 1x Kabellose, optische Maus
■ 1x USB Empfänger
■ 1x Gebrauchsanleitung
■ 2x AAA Alkali-Batterien
Systemvoraussetzung
■ Benutzersystem: Windows ME, 2000, XP, Vista
■ Freier USB Steckplatz
Installation
Ein-/Ausschalter nicht erkennen, dann stecken Sie den USB Empfänger in einen anderen, freien USB Steckplatz ein. Sobald der Vorgang erfolgreich abgeschlossen wurde, können Sie die Maus verwenden.
DE
Benutzung der Maus
linke Taste rechte Taste
Vorwärts
Taste
Rückwärts
Taste
Scroll
Rad
CPI Knopf
Batteriefach
Ablagefach für den
Empfänger
Abb.2 USB Empfänger
Abb.1 Maus Unterseite
Batterien einlegen
1. Öff nen Sie das Batteriefach
2. Setzen Sie die zwei AAA Batterien in das Batteriefach ein - Achten Sie bitte auf die Polarität (+/-).
3. Schließen Sie das Batteriefach
4. Stellen Sie den Schalter auf ON, um die Maus einzuschalten.
USB Empfänger installieren
Stecken Sie den USB Empfänger in einen freien
USB Anschluss in Ihrem Computer ein. Windows wird das Gerät automatisch erkennen und das
USB Gerät installieren. Sollte Windows das Gerät
Abb. 3.
Frontansicht der Maus
CPI Aufl ösung ändern
Drücken Sie den CPI Knopf, um zwischen einer
Aufl ösung von 800 und 1600 CPI zu wählen. Die
LED Statusanzeige unter dem CPI Knopf, wird ein paar mal blinken – langsames blinken = 800 CPI, schnelles blinken = 1600 CPI.
Vor-/Rückwärtstasten
Beim surfen im Internet, können Sie sich entsprechend die vorherige oder die nächste Seite anzeigen lassen.
Stromsparen
Die Maus ist mit einem automatischen Stromsparmodus ausgestattet. Wir empfehlen Ihnen, bei längerer nicht Benutzung, den Schalter auf die Position „OFF“ zu stellen.
Sobald die Batterien entladen sein sollte, wird Ihnen dies durch eine blinkende CPI LED Statusanzeige signalisiert. Bitte ersetzen Sie die Batterien durch ein neues paar Batterien.
WIRELESS OPTICAL
MOUSE 2.4G
MT1073
Hi-Res Wireless Optical Mouse
Bruger manual
Pakken Indeholder
■ Trådløs optisk mus – 1 stk.
■ USB Modtager – 1 stk.
■ Bruger manual – 1 stk.
■ Alkaline AAA batterier - 2 stk.
System krav
■ Operations system: Windows ME, 2000, XP, Vista
■ Ledig USB port
Installation
USB-port. Når operationen er vellykket er musen klar til at arbejde.
Brug af musen
Venstre museknap
Frem knap
Tilbage knap
Højre museknap
Scroll hjul
DPI knap
DK
ON/OFF knap
Batteri dæksel
Rum for opbevaring af modtager
Pic. 2 USB modtager
Pic. 1 Mus set fra bunden
Isætning af batterier
1. Åben batteri dæksel
2. Isæt to AAA batterier i batterirummet ifølge polarisering mærker (+/-).
3. Luk batteri dæksel
4. Flyt ON/OFF knap til ON position.
Isætning af USB modtager
Sæt USB-modtageren i en ledig USB-port på computeren. Windows vil automatisk genkende og installere ny HID enhed. Hvis enheden ikke genkendes korrekt forsøg da med en anden
Pic. 3.
Mus set fra oven
Skift DPI opløsning
Tryk på DPI-knappen for at skifte mellem 800 og
1600 DPI opløsning. LED indikatoren under DPI knappen blinker et par gange - langsomt blinkende for 800 DPI og hurtigt blinkende for 1600
DPI.
Frem/tilbage-knap
Når du surfer på Internettet - tryk tilbage for at få adgang til forrige side eller trykke på frem for at få adgang til næste side.
Strømbesparelse
Musen er forsynet med automatisk strømspare system. Hvis du ikke bruger musen i længere tid anbefales det at slukke.
Når batterierne er slidt op og skal udskiftes blinker DPI LED automatisk. Udskift batterierne med nogle nye.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project