Elkay ELUHF2520, ELUHF3320, KBUHF3320, ELUHFS2816, KBUHFS2816 kitchen sinks Installation Instructions
Below you will find brief information for kitchen sinks ELUHF2520, kitchen sinks ELUHF3320, kitchen sinks KBUHF3320, kitchen sinks ELUHFS2816. These undermount double and single bowl apron sinks are designed for solid surface countertops and require a custom sink base cabinet. They are intended for experienced and professional installation only and come with mounting brackets to secure the sink to the countertop. The front apron must be secured to the front of the cabinet to avoid damage. This document will guide you through the installation process.
advertisement
▼
Scroll to page 2
of
4
® Installation Instructions Undermount Double and Single Bowl Apron Sinks CAREFULLY READ THESE INSTRUCTIONS BEFORE YOU BEGIN. • • • • • • • • • • • Metal edges may be sharp – use caution when handling. For Experienced and Professional Installation Only. Follow all local standards and codes. For solid surface countertop installations only. A custom sink base cabinet is required. Proper installation requires a coordinated effort including advanced dialog between the designer (or customer), the cabinet maker, the countertop fabricator and the sink installer during the design and installation phase. Elkay recommends providing the cabinet maker with the actual sink to be installed prior to cabinet fabrication. Mounting brackets (fasteners not furnished) are provided for securing the sink to the countertop. WARNING: Due to the custom nature of this type of installation, no cutout template is included. It is recommended that the sink is installed with a 1/2" countertop reveal as illustrated in Figure 1. It is further recommended that the installer(s) discuss this with the customer and agree that this finished appearance is the desired effect. Elkay Manufacturing Company is not responsible for improper sink or countertop installations. For reference, Figure 2 provides dimensional information to establish the cutout position in relationship to the front of the custom cabinet. WARNING: Front sink apron must be secured to the front of the cabinet by driving fasteners (not supplied) through the cabinet front and into the sink mounting wood strips as illustrated (see Figure 3). Failure of this step can lead to product damage. COUNTERTOP RECOMMENDED COUNTERTOP RECESS 1/2" SILICONE CAULK (NOT FURNISHED) MOUNTING BRACKET FASTENER (NOT FURNISHED) SINK 1-1/8" FIGURE 1 SINK PROFILE 2-1/4" RADIUS OPENING IN COUNTERTOP 17-7/8" FROM CABINET FRONT FOR ELUHF2520 COUNTERTOP 18-1/8" FROM CABINET FRONT FOR ELUHF3320/ KBUHF3320 AND ELUHFS2816/ KBUHFS2816 COUNTERTOP RECESSED 1/2" (3 SIDES) CABINET BASE 30" FOR ELUHF3320/KBUHF3320 29" FOR ELUHFS2816/KBUHFS2816 22" FOR ELUHF2520 FIGURE 2 17-7/8" FROM CABINET FRONT FOR ELUHF2520 COUNTERTOP 18-1/8" FROM CABINET FRONT FOR ELUHF3320/KBUHF3320 AND ELUHFS2816/KBUHFS2816 MOUNTING BRACKET (INCLUDED) MINIMAL GAP FASTENER (NOT FURNISHED) MOUNTING WOOD STRIP ON SIDES AND BOTTOM OF FRONT PANEL FRONT PANEL TO MOUNT FLUSH TO CABINET MINIMAL GAP FRONT OF CABINET SINK PROFILE FASTENERS (NOT FURNISHED) THROUGH CABINET TO SECURE TO WOOD STRIP IN FRONT PANEL OF SINK. RECOMMENDED (3) ACROSS FRONT AND (1) ON EACH SIDE. FIGURE 3 CABINET Suggestions for the Care and Cleaning of your Elkay Stainless Steel Sink ELKAY SATIN FINISH embedded in the surface of the sink. The steel particles will rust and will give the appearance that the sink itself is rusting. Elkay's original highlighted satin finish is produced by an abrasive grinding operation which lends a uniform pattern of satin finish lines to the metal surface. All exposed areas then undergo a series of progressive machine and hand polishing operations. It is this careful polishing that makes an Elkay satin luster finish so beautiful…and so easy to clean and maintain. • Do Not…Use rubber mats or dishpans in the sink. Leaving rubber mats or dishpans in the sink can lead to surface rust or possible pitting. However, if you insist on using mats or dishpans, please remove them after each use and rinse thoroughly. RECOMMENDED CLEANSERS • Do Not…Leave wet sponges, cloths, or cleaning pads on the sink. This can lead to surface rust. Elkay has tested general household cleansers to measure their effectiveness in cleaning stainless steel sinks. The most aggressive cleansers consist of Bar Keeper’s Friend, Zud and Lawrence Right Work. Other cleansers, which are still effective, but less aggressive include Ajax, Comet, Shiny Sinks Plus, Luneta, Soft Scrub, Mr. Clean, Maas and Flitz. So to help maintain the beautiful finish of your stainless steel sink, use one of the cleansers that Elkay recommends. RECOMMENDATIONS FOR PROPER MAINTENANCE • Do…Rinse thoroughly after each use. “Thorough” rinsing can be done by running water for a few minutes and rubbing the cleaned area with a clean sponge. • Do…Towel dry after each use to prevent mineral deposits from building up on the surface of the sink. • Do…Clean the sink once a week, being sure to rub in the direction of the satin finish grain lines, using an Elkay recommended cleanser. • Do…Use an Elkay bottom grid or rinsing basket to “protect” the finish. Bottom grids and rinsing baskets can remain in the sink and will not cause rusting or pitting. • Do Not…Rub the sink across the satin finish lines. Scouring across the satin finish lines can damage the original sink finish. • Do Not…Allow soap or other household cleansers to dry on the surface of the sink. Most brands contain chemical additives which will affect the original finish. • Do Not…Use solutions of chlorine bleach and water in the sink. Chlorides, which are found in most soaps, detergents, bleaches, and cleansers, are very aggressive to stainless steel. If left on the sink too long they can cause surface pitting. • Do Not…Use a steel wool pad to clean your sink. If a more abrasive product is needed, use a green Scotch Brite pad being sure to rub in the direction of the satin finish grain lines. Steel wool pads have a tendency to break apart and small particles of steel can become Following these recommendations for the care and cleaning of your stainless steel sink will insure that it will provide you with many years of service. CHLORIDES Today, chlorides are found in most all soap, detergents, bleaches and cleansers; chlorides can be aggressive to stainless steel. However, chlorides are very water soluble. Therefore, THOROUGH RINSING of your sink after each use to remove any chloride residue and a weekly cleaning is all that is required to keep your sink looking bright and shiny. SCRATCHES Like many metallic surfaces, your stainless steel sink will scratch. These are merely usage scratches and over time will blend into the overall finish of your sink with proper cleaning. KNIVES Your sink is designed to serve as many things but not as a cutting board or chopping block. This type of use will lead to deep scratches in the sink finish and will dull your knives. Elkay does offer various cutting boards which will provide an additional work area. WATER QUALITY The quality of your water can affect your sink’s appearance. If your water has a high iron content, a brown surface stain can form on the sink giving the appearance of rust. Additionally, in areas with a high concentration of minerals, or with over-softened water, a white film may develop on the sink. To combat these problems, we suggest that the sink be towel dried after use, and again, on a weekly basis, the sink should be cleaned using a recommended cleanser. FOODS Heavy salt concentration or foods containing high levels of salt should not be allowed to dry on the sink surface. Rinse your sink thoroughly after use. Installation Instructions ® ® LIMITED LIFETIME SINK WARRANTY Elkay warrants to the original purchaser of an Elkay stainless steel sink, that Elkay will, at its option, replace, without charge, such product if it fails due to a manufacturing defect for a lifetime of normal residential use. Product replacement does not include transportation cost or labor installation cost. This warranty covers only the stainless steel sink and mounting hardware when a self-rimming drop-in sink is installed in a conventional countertop surface or an undermount sink is installed in a conventional solid surface countertop in residential applications only. Elkay reserves the right to examine product in question and its installation prior to replacement. OTHER WARRANTY CONDITIONS ON SINKS Our warranty does not cover product failure caused by abusive treatment, misuse, environmental factors, improper care and cleaning, or damage due to handling or faulty installations. This warranty is extended only to the original consumer purchaser of the product. This warranty does not cover shipping costs, labor costs, or any other charges for such items as installation or replacement of the sink, diagnosis or replacement of any faucet or component part, or any other expense or loss. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given. Any implied warranty, including one of merchantability or fitness for a particular purpose, is limited to the duration of this written warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TO OBTAIN SERVICE UNDER WARRANTY 1. Write to: Elkay Attention: Consumer Services 2222 Camden Court Oak Brook, Illinois 60523 2. Include a letter containing the following information: a. Date of purchase and installation b. Description of nature of defect c. Model number or description of model and/or component part if possible. Elkay 2222 Camden Court Oak Brook, IL 60523 ©2006 Elkay Printed in U.S.A. elkayusa.com (Rev. B 2/06) PART NO. 74180261
advertisement
Key Features
- Undermount Installation
- Double and Single Bowl Options
- Apron Front Design
- Solid Surface Countertop Compatibility
- Custom Cabinet Required
- Mounting Brackets Included
- Professional Installation Recommended
Frequently Answers and Questions
What type of countertop is this sink designed for?
These sinks are designed for solid surface countertops only.
Do I need a specific cabinet for this sink?
Yes, a custom sink base cabinet is required.
What is the recommended countertop reveal for this sink?
A 1/2" countertop reveal is recommended.
Related manuals
Download
PDF
advertisement