- Stern-Williams
- SB-850
- Specification
- 2 Pages
Stern-Williams SB-850 24 x 12 in. Tiling Flange Specification
Below you will find brief information for 900 SB-900, 901 SB-901, 902 SB-902, 903 SB-903, 700 SB-700, 701 SB-701, 702 SB-702, 703 SB-703, 500 SB-500. These models are mop service basins with various dimensions and tiling flange options. The basins are made of pearl grey marble chips and white Portland cement and have stainless steel cap and drain with stainless steel strainer. The models are designed to provide a durable and reliable solution for mopping services in commercial and industrial settings.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
Model No. ( ) Size ( ), as manufactured by Stern-Williams
Co., Inc. Shoulders shall not be less than 9-3/4" high inside measurement, and not less than 1-1/4" wide. Tiling flange, cast integral, shall extend
1" above shoulder on 1,2 or 3 sides ( as job required). Drain shall be cast brass with stainless steel strainer cast integral and shall provide for a caulked lead connection not less than 1" deep to a 3" pipe. Receptor composed of pearl grey marble chips and white Portland cement ground smooth, grouted and sealed to resist stains. Stainless steel cap of one piece 20 ga. 302 stainless steel cast integral on all four sides.
SERVICEPTOR
MOP SERVICE BASINS
ARCHITECTURAL
SPECIFICATIONS
SB-802
SB-900
SB-302-L
WITH STAINLESS STEEL CAP
MODEL FLANGES
24" X 24" x 12"
SB-900 without tiling flange
SB-901 w/tiling flange -1 sd.
SB-902 w/tiling flange - 2 sds.
SB-903 w/tiling flange - 3 sds.
32" X 32" x 12"
SB-700 without tiling flange
SB-701
SB-702
SB-703 w/tiling flange -1 sd.
w/tiling flange - 2 sds.
w/tiling flange - 3 sds.
MODEL FLANGES
36" X 36" x 12"
SB-500 without tiling flange
SB-501 w/tiling flange -1 sd.
SB-502 w/tiling flange - 2 sds.
SB-503 w/tiling flange - 3 sds.
36" X 24" x 12"
SB-300 without tiling flange
SB-301 w/tiling flange -1 sd.
SB-302-L w/tiling flange - 2 sds.
SB-302-R w/tiling flange - 2 sds.
SB-303 w/tiling flange - 3 sds.
* Flange is across back and on LEFT side on model numbers ending in “L”.
SB-202-R
WITHOUT STAINLESS STEEL CAP
MODEL FLANGES
24" X 24" x 12"
SB-800 without tiling flange
SB-801 w/tiling flange -1 sd.
SB-802 w/tiling flange - 2 sds.
SB-803 w/tiling flange - 3 sds.
32" X 32" x 12"
SB-600 without tiling flange
SB-601
SB-602
SB-603 w/tiling flange -1 sd.
w/tiling flange - 2 sds.
w/tiling flange - 3 sds.
MODEL FLANGES
36" X 36" x 12"
SB-400 without tiling flange
SB-401 w/tiling flange -1 sd.
SB-402 w/tiling flange - 2 sds.
SB-403 w/tiling flange - 3 sds.
36" X 24" x 12"
SB-200 without tiling flange
SB-201 w/tiling flange -1 sd.
SB-202-L w/tiling flange - 2 sds.
SB-202-R w/tiling flange - 2 sds.
SB-203 w/tiling flange - 3 sds.
* Flange is across back and on RIGHT side on model numbers ending in “R”.
C.
B.
QUALITY OPTIONAL FITTINGS
A. T-10-VB Mop-Service sink fitting with vacuum breaker, adjustable top brace, 3/4" hose thread on spout with bucket hook inlets 8" on center, chrome finish.
T-15 VB same as above with polished chrome finish.
B. T-35 Hose and wall hook. Hose 36" long, with 3/4" chrome couplings. Wall bracket of stainless steel.
C. T-40 Stainless Steel Mop Hanger of stainless steel with #4 finish. . . 24" long, with
3 rubber spring loaded grips.
D. BP Splash Catcher Panels of 20 ga. type 304 stainless steel.
D.
A.
JOB
LOCATION
ARCHITECT
ENGINEER
CROSS SECTION
900, 700, 500 AND 300 SERIES
TILING FLANGE
STAINLESS STEEL CAP
1-1/4"
(32)
CROSS SECTION
800, 600, 400 AND 200 SERIES
TILING FLANGE 1-1/4"
(32)
3" (A.S.) WASTE PIPE BY OTHERS
EXTENDS 1" (25 MM) ABOVE
ROOM FLOOR
2"
(51)
LEAD CAULKING
BY OTHERS
3" (A.S.) WASTE PIPE BY OTHERS
EXTENDS 1" (25 MM) ABOVE
ROOM FLOOR
2"
(51)
LEAD CAULKING
BY OTHERS
ROUGH-IN
FURNISHED
BY OTHERS
C
A
C
C
CAST INTEGRAL
TILING FLANGE
B
Height all models 12", 305 MM
SERIES A B C
INCHES MM INCHES MM INCHES MM
900 24 610 24 610 12 305
800 24 610 24 610 12 305
700 32 813 32 813 16 406
600 32 813 32 813 16 406
500 36 914 36 914 18 457
400 36 914 36 914 18 457
A
Height all models 12", 305 MM
SERIES A B C D
INCHES MM INCHES MM INCHES MM INCHES MM
300 24 610 36 914 12 305 18 457
200 24 610 36 914 12 305 18 457
Note: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 MM).
STERN-WILLIAMS CO., INC . • P.O. Box 8004 • Shawnee Mission, Kansas 66208 USA
Telephone: (913) 362-5635 • Fax: (913) 362-6689 • Web address: www.sternwilliams.com
NO. SB 4-12
advertisement
Key Features
- Pearl grey marble chips and white Portland cement
- Stainless steel strainer
- Stainless steel cap
- Tiling flange option
- Various dimensions
- Adjustable top brace
- Hose thread on spout
- Bucket hook inlets
- Chrome finish
- Stainless steel wall bracket