Intermec AC1 4-Slot battery charger, CK30, CK31 handheld computer Instructions
Below you will find brief information for battery charger AC1 4-Slot. The Intermec AC1 4-Slot Battery Charger is an accessory for the CK30 and CK31 Handheld Computers. You can charge up to four batteries at one time in the charger. The charger fully charges the batteries in about 5 hours. The charger has four slots and can be used to charge up to four batteries simultaneously. The status lights on the charger will indicate the charging status of each battery.
advertisement
Installing the AC1
1
2
Place the battery charger on a flat, stable, and clean surface that is within 1.5 m (5 ft) of an AC power outlet.
Connect the AC power supply to the power connector on the battery charger and to an AC power outlet. The Status light in each button turns on, showing that the battery charger is ready to use.
Where to Find More Information
You may need additional information when working with the AC1 and CK30 or CK31 in a data collection system. Please visit our web site at www.intermec.com to download our current manuals in PDF format.
Electrical rating: x 12V, 4A
Requires Intermec AC power supply v 100 to 240 VAC, 50 to 60 Hz
Status light
(4 places)
Power connector
Button
(4 places)
To prevent fire or electric shock, do not expose the AC1 to rain or moisture.
Patent Information
Product is covered by one or more of the following patents: 5,052,943; 5,195,183; 5,317,691; 5,331,580;
5,544,010; 5,644,471. There may be other U.S. and foreign patents pending.
P/N 073530-008
ations
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2010 Intermec Technologies
Corporation. Alle Rechte vorbehalten.
AC1 4-Slot Battery Charger
Instructions
What Is the AC1?
The AC1 4-Slot Battery Charger is an accessory for the CK30 and CK31 Handheld Computers. You can use the battery charger to charge up to four batteries at the same time.
This guide explains how to install and use the battery charger.
What You Need
To use the charger, you need:
•
an AC power supply.
•
an AC power cord.
You need to purchase the appropriate power cord for your location. For more information, contact your Intermec sales representative.
You must use the appropriate Intermec power supply with this device or equipment damage may occur.
Charging Batteries
You can charge up to four batteries at one time in the charger. The charger fully charges the batteries in about 5 hours.
To charge batteries
1
With the battery contacts facing the charger, slide the battery into one of the slots.
2
Push the battery into the slot to engage the latch. The Status light for that slot changes from yellow to green or red to indicate the battery charge status. See “Understanding the Lights” to learn what the Status light colors mean.
To remove batteries
•
Press the button for that slot and slide the battery up and out.
AC1 4-Slot Battery Charger Instructions
Understanding the Status Lights
This table explains what the different colors of the Status lights mean.
Color
No Color
Steady Yellow
Description
The battery charger is not receiving power. Make sure the power supply is connected properly to a powered AC outlet.
The battery charger is connected to AC power and is ready to charge.
Flashing Green The battery is charging.
Steady Green
Flashing Red
The battery is fully charged.
The battery is not charging. Try these solutions:
•
Make sure the battery is firmly installed in the charger.
•
Make sure the power supply is connected properly to a powered
AC outlet.
•
Make sure the charging pins on the AC1 and the battery contacts on the battery are clean.
advertisement
Key Features
- charges up to 4 batteries simultaneously
- charges batteries in about 5 hours
- has status lights to indicate charging status
- compatible with CK30 and CK31 handheld computers
Frequently Answers and Questions
What is the AC1?
How long does it take to charge a battery using the AC1?
What do the different colors of the status lights mean?
Related manuals
advertisement