Optoma ES515 data projector User's Guide

Table of Contents
Usage Notice....................................................................................................................... 2
Safety Information.........................................................................................................................2
Class B emissions limits.................................................................................................................................................................2
Important Safety Instruction.........................................................................................................................................................2
Precautions......................................................................................................................................4
Eye Safety Warnings......................................................................................................................6
Product Features............................................................................................................................7
Introduction........................................................................................................................ 8
Package Overview.........................................................................................................................8
Product Overview .........................................................................................................................................................................9
Main Unit.........................................................................................................................................................................................9
Control Panel.................................................................................................................................................................................10
Rear View.......................................................................................................................................................................................11
Remote Control.............................................................................................................................................................................12
Installation......................................................................................................................... 13
Connecting the Projector.............................................................................................................13
Connect to Computer / Notebook.............................................................................................................................................13
Connect to Video Sources............................................................................................................................................................14
Powering On/Off the Projector.................................................................................................15
Powering On the Projector..........................................................................................................................................................15
Powering Off the Projector..........................................................................................................................................................16
Warning Indicator........................................................................................................................................................................16
Adjusting the Projected Image...................................................................................................17
Adjusting the Projector’s Height................................................................................................................................................17
Adjusting the Focus......................................................................................................................................................................17
Adjusting Projection Image Size.................................................................................................................................................18
User Controls.................................................................................................................... 19
Control Panel................................................................................................................................19
Remote Control............................................................................................................................20
On-screen Display Menus...........................................................................................................21
How to operate..............................................................................................................................................................................21
Menu Tree......................................................................................................................................................................................22
Image.............................................................................................................................................23
Display...........................................................................................................................................28
Setup..............................................................................................................................................30
Options..........................................................................................................................................39
Appendices....................................................................................................................... 43
Troubleshooting...........................................................................................................................44
Image..............................................................................................................................................................................................44
Other...............................................................................................................................................................................................47
Projector LED Status Indicatior..................................................................................................................................................48
Remote Control.............................................................................................................................................................................49
Audio Problems............................................................................................................................................................................49
Replacing the Lamp......................................................................................................................................................................50
Cleaning the Projector.................................................................................................................52
Cleaning the Lens.........................................................................................................................................................................52
Cleaning the Case.........................................................................................................................................................................52
Compatibility Modes...................................................................................................................53
RS232 Commands........................................................................................................................55
RS232 Protocol Function List......................................................................................................56
Ceiling Installation.......................................................................................................................63
Optoma Global Offices................................................................................................................64
Regulation & Safety notices........................................................................................................66
Operation conditions...................................................................................................................67
English
Usage Notice
Safety Information
The lightning flash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of import operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Read these instructions –before using this projector.
2. Keep these instructions –for future reference.
3. Follow all instructions.
4. Install in accordance with the manufacturer’s instructions :
A.
. To ensure reliable
operation of the projector and to protect it from overheating,
put the projector in a position and location that will not
interfere with its proper ventilation. For example, do not
place the projector on a bed, sofa, carpet, or similar surface
that may block the ventilation openings. Do not put it in an
enclosure, such as a bookcase or a cabinet that may keep air
from flowing through its ventilation openings.
B.
. To reduce
the risk of fire or electric shock, do not expose the projector to
rain or moisture.
C.
, such as radiators, heaters,
stoves or other apparatus (including amplifiers) that produce heat.
5. Clean only with a dry cloth.
6. Only use attachments/accessories specified by the
manufacturer.
English
Usage Notice
7. Refer all servicing to qualified service personnel. Servicing is
required when the projector has been damaged in any way, such as:
r Power supply cord or plug is damaged.
r Liquids have spilled or objects have fallen into the apparatus.
r The projector has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Do not attempt to service this projector yourself. Opening or
removing covers may expose you to dangerous voltages or
other hazards. Please call Optoma to be referred to an
authorized service center near you.
8. Do not let objects or liquids enter the projector as they may touch
dangerous voltage points or short-out parts that could result in a
fire or electric shock.
9. See projector enclosure for safety related markings.
10.The projector should not be adjusted or repaired by anyone
except properly qualified service personnel.
English
Usage Notice
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
▀■ Warning - Do not look into the projector’s lens when the lamp is
on. The bright light may damage your eyes.
▀■ Warning - To reduce the risk of fire or electric shock, do not
expose this projector to rain or moisture.
▀■ Warning - Please do not open or disassemble the projector as
this may cause electric shock.
▀■ Warning - When replacing the lamp, please allow unit to cool down,
and follow all replacement instructions. See page 50.
▀■ Warning - This projector will detect the life of the lamp itself. Please
be sure to change the lamp when it shows warning
messages.
v When the
lamp reaches
the end of its
life, the
projector will
not turn back
on until the
lamp
module
has been
replaced. To
replace the
lamp, follow
the procedures
listed under
“Replacing the
Lamp” section
on page 50.
▀■ Warning - Use the “Lamp Reset” function from the on-screen display
“Options | Lamp Settings” menu after replacing the lamp
module (see page 42).
▀■ Warning - When switching the projector off, please ensure the
cooling cycle has been completed before disconnecting
the power. Allow 90 seconds for the projector to cool
down.
▀■ Warning - When the lamp is approaching the end of its life, the
message “Lamp is approaching the end of its useful
life” displays on the screen. Please contact your
local reseller or service center to change the lamp
as soon as possible.
▀■ Warning - To reduce the risk of injury to the eyes, do not look
directly into the laser beam on the remote control and
do not point the laser beam into anyone’s eyes. This
remote control is equipped with a Class II laser that emits
radiation.
English
Usage Notice
Do:
v Turn off the product before cleaning.
v Use a soft cloth moistened with a mild detergent to clean the
display housing.
v Disconnect the power plug from the AC outlet if the product
is not being used for a long period of time.
Do not:
v Block the ventilation slots and openings on the unit.
v Use abrasive cleaners, waxes or solvents to clean the unit.
v Use under the following conditions:
- In extremely hot, cold or humid environments. Ensure that
the ambient room temperature is within 5-40 °C and relative
humidity is 10-85% (max.), non-condensing.
- In areas susceptible to excessive dust and dirt.
- Near any appliance that generates a strong magnetic field.
- In direct sunlight.
English
Usage Notice
Eye Safety Warnings
▀■ Avoid staring directly into the projector’s beam of light at all times.
▀■ Minimize standing facing into the beam. Keep your back to the
beam as much as possible.
▀■ Using a stick or laser pointer is recommended to avoid the need
for the presenter to enter the beam.
▀■ Ensure that projectors are located out of the line of sight from
the screen to the audience; this ensures that, when presenters
look at the audience, they do not also have to stare at the
projector lamp. The best way to achieve this is by ceilingmounting the projector rather than placing it on floor or table
top.
▀■ When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
▀■ In order to minimize the lamp power needed, use room blinds to
reduce ambient light levels.
English
Usage Notice
Product Features
This product is a single chip 0.55” SVGA DLP® projector.
Outstanding features include:
u Texas Instruments Single chip DLP® Technology
u Computer Compatibility:
Apple Macintosh, iMac, and VESA Standards:
UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA
u Video Compatibility:
■ NTSC, NTSC4.43
■ PAL/PAL-M/PAL-N/SECAM
■ SDTV and EDTV compatible
■ HDTV compatible (720p, 1080i, 1080p)
u Auto source detection with user definable settings
u Fully featured IR remote control
u User friendly multilingual On Screen Menu
u Advanced digital keystone correction and high
quality full screen image re-scaling
u One built-in speaker 2 Watt amplifier
u Macintosh and PC compatible
u Closed Captioning equipped
English
Introduction
Package Overview
This projector comes with all the items shown below. Check to
make sure your unit is complete. Contact your dealer immediately if
anything is missing.
2
R
S
3V
O
C
LT
0
2
5
Projector
IR Remote Control
(with 3V Battery)
v Due to the
Documentation:
difference in
applications
for each
country, some
regions may
have different
accessories.
English
þ
þ
þ
þ
User’s Manual
Warranty Card
Quick Start Card
WEEE Card
Power Cord 1.8m
VGA Cable 1.8m
Introduction
Product Overview
Main Unit
1
2
3
4
5
6
v Due to the
difference
application for
each model.
Function is
dependent
on the model
purchased.
VID
EO
AU
DIO
IN
RS
−232
VG
A
9
8
7
1. Control Panel
6. Front IR Receiver
2. Focus
7. Input/Output Connections
3. Tilt-Adjustment Foot
8. Power Socket
4. Lens
9. Kensington™ Lock
5. Elevator foot
English
Introduction
Control Panel
1
1. Power LED
2. Lamp LED
English
10
2
3
3. POWER Button
Introduction
Rear View
1
2
3
4
5
6
VIDEO
AUDIO IN
RS−232
VGA
v Due to the
difference
application for
each model.
Function is
dependent
on the model
purchased.
1. KensingtonTM Lock Port
2. Power Socket
3. Video Connector
4. AUDIO IN Connector
5. RS-232 Connector
6. VGA Connector
11
English
Introduction
Remote Control
1
1. Up
15
3. Enter
5. Zoom + / 2
14
13
12
6. Zoom - / 5
11
6
10
7
4. Right
v Due to the
difference in
applications
for each
country, some
regions may
have different
accessories.
2
3
4
2. Power On/Off
7. Re-Sync / 8
8. AV mute / 7
5
9. Freeze / 4
10. Source / 6
11. Keystone
/3
12. Keystone
/1
13. Down
14. Left
15. Menu
English
12
9
8
Installation
Connecting the Projector
Connect to Computer / Notebook
2
v Due to the
difference in
applications
for each
country, some
regions may
have different
accessories.
1

 
3
4


1. Power Cord
2. Audio-in (Optional 3.5mm jack cable)
3. RS-232 Cable (Optional)
4. VGA Cable
13
English
Installation
Connect to Video Sources
DVD Player, Set-top Box,
HDTV receiver
5
3
4
2
6
4
1

v Due to the
difference in
applications
for each
country, some
regions may
have different
accessories.
 

8

7
Audio
AudioOut
In
L
Video Output
Audio - Out
1. Power Cord
2. SCART to video cable (Optional)
3. Component Cable (Optional)
4. RGB to Component Adapter (Optional)
5. SCART to RGB & S-Video Adapter (Optional)
6. VGA Cable
7. Audio-in (Optional RCA to 3.5mm jack cable)
8. Composite Video Cable (Optional)
English
14
R
Installation
Powering On/Off the Projector
Powering On the Projector
1. Connect the power cord to the projector.
2. Turn On the connected devices.
3. Ensure the Power LED is flashing and then press the POWER
button to turn On the projector.
v Turn on the
projector first
and then
select the
signal sources.
The projector’s startup logo screen displays and connected
devices are detected. If the connected device is a PC, press the
appropriate keys on the computer keyboard to switch the
display output to the projector. (Check the user manual of the
PC to determine the appropriate Fn key combination to change
display output.)
See Security Settings on page 36 if security lock is enabled.
4. If more than one input device is connected, press the “Source”
button sequentially to switch between devices.
(DVD and HDTV are supported through the VGA connector)
15
English
Installation
Powering Off the Projector
1. Press POWER to turn off the projector lamp, a message displays
on the projector’s screen.
2. Press
again to confirm, otherwise the message
disappears after 5 seconds.
3. The cooling fans continue to operate for about 10 seconds for
cooling cycle.
(If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has entered
standby mode. Once in standby mode, simply press
to
restart the projector.)
4. Disconnect the power cord from the electrical outlet and the
projector.
5. Do not turn on the projector immediately following a power off
procedure.
Warning Indicator
v When the LAMP LED indicator lights red, the projector will
automatically shut itself down. Please contact your local reseller
or service center. See page 48.
v When the POWER LED repeatedly blinks six (6) times in
conjunction with the LAMP LED blinking a single time, it
indicates the fan has failed. Please contact your local dealer or
our service center. See page 48.
English
16
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with elevator foot for adjusting the image
height.
To raise the image:
1. Press the elevator button u.
2. Raise the projector to the desired height using the Elevator
Foot v, then release the button to lock the elevator foot into
position.
3. Use the Tilt-Adjustment Foot w to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator
feet into position.
3. Use Tilt-Adjustment Foot w to fine-tune the display angle.
3
1
2
Adjusting the Focus
To focus the image, rotate the focus ring until the image is clear.
The projector will focus at distances from 3.3 to 32.8 feet (1.01 to
10 meters).
17
English
Installation
Use the keystone buttons to correct image distortion. They can be
found on the remote control.
Adjusting Projection Image Size
ag
on
al
248.55''
(631.31cm)
Height
Di
200''
(508 cm)
150''
(381cm)
100''
(254 cm)
Width
80''
(203.2 cm)
25''
(63.5 cm)
Hd
3.3'(1.01m)
10.56'(3.22m)
13.2'(4.02m)
19.8'(6.04m)
26.4'(8.05m)
32.81'(10m
English
18
Screen
(Diagonal)
25”
(63.5cm)
80”
(203.2cm)
100”
(254cm)
150”
(381cm)
200”
(508cm)
248.55”
(631.31cm)
Screen size
20”x15”
51x38cm
64”x48”
163x122cm
80”x60”
203x152cm
120”x90”
305x229cm
160”x120”
406x305cm
198.84”x149.13”
505.05x378.79cm
Hd
2.1” / 5cm
6.72” / 17cm
8.4” / 21cm
12.6” / 32cm
16.8” / 43cm
20.88” / 53.03cm
Distance
3.3’ / 1.01m
10.56’ / 3.22m
13.2’ / 4.02m
19.8’ / 6.04m
26.4’ / 8.05m
32.81’ / 10m
User Controls
Control Panel
Using the Control Panel
Power
Power LED
Lamp LED
Refer to the “Powering On/Off the Projector”
section on page 15.
Green
Unit is powered on and working
correctly.
Flashing
Green
Unit is on stand-by/warm up/
cooling down.
Off
Unit is powered off.
On
Lamp not ready—do not press the
power button.
Off
Lamp is in normal state.
19
English
User Controls
Remote Control
Using the Remote Control
English
20
Power
Refer to the “Powering On/Off the
Projector” section on page 15.
Four
Directional
Select Keys
Use pqtu to select items or make
adjustments to your selection.
8
Confirm your item selection.
Source / 6
Press
Re-Sync / 8
Automatically synchronizes the projector to
the input source.
Keystone
/1
Keystone
/3
to select an input signal.
Adjusts image distortion caused by tilting
the projector. (±30 degrees)
Menu
to launch the on-screen
Press
display (OSD) menu. To exit OSD, Press
Menu again.
Zoom + / 2
Press + to zoom in to an image.
Zoom - / 5
Press - to zoom out of an image.
Freeze / 4
Press
AV Mute / 7
Momentarily turns off/on the audio and
video.
to pause the screen image.
User Controls
On-screen Display Menus
The Projector has multilingual On-screen Display menus that allow
you to make image adjustments and change a variety of settings.
The projector will automatically detect the source.
How to operate
1. To open the OSD menu, press
on the Remote Control.
2. When OSD is displayed, use tu keys to select any item in the
main menu. While making a selection on a particular page, press
q or
to enter sub menu.
3. Use pq keys to select the desired item and adjust the settings
by tu key.
4. Select the next item to be adjusted in the sub menu and adjust
as described above.
5. Press
to confirm, and the screen will return to the main menu.
6. To exit, press
again. The OSD menu back to last level
projector will automatically save the new settings.
Main Menu
Sub Menu
Settings
21
English
User Controls
Menu Tree
English
22
User Controls
Image
Display Mode
There are many factory presets optimized for various types of
images.
4 Presentation: Good color and brightness from PC input.
4 Bright: Maximum brightness from PC input.
4 Movie: For home theater.
4 sRGB: Standardised accurate color.
4 Blackboard: Tuned for blackboard usage.
4 Classroom: Recommended settings for classroom.
4 User: User’s own settings.
The initial default settings of this mode is from Presentation/
Movie mode. Any further adjustments by the user will be
saved in this mode for future use.
4 3D: Recommend setting for 3D mode enable (DLP-Link / IR).
Brightness
Adjust the brightness of the image.
4 Press t to darken image.
4 Press u to lighten the image.
Contrast
The contrast controls the degree of difference between the
lightest and darkest parts of the picture.
4 Press t to decrease the contrast.
4 Press u to increase the contrast.
Sharpness
Adjusts the sharpness of the image.
4 Press t to decrease the sharpness.
4 Press u to increase the sharpness.
23
English
User Controls
Image
Saturation
Adjusts a video image from black and white to full color
saturation.
4 Press t to decrease the amount of saturation in the image.
4 Press u to increase the amount of saturation in the image.
Tint
Adjusts the color balance of red and green.
4 Press t to increase the amount of green in the image.
4 Press u to increase the amount of red in the image.
Color Settings
Enter the Color Settings menu. Select the Red/Green/Blue Gain
for brightness adjustments and Bias for contrast adjustments
for the whole picture. Individual color adjustments for Cyan,
Magenta, Yellow can also be adjusted. See page 25 for more
details.
Advanced
Enter the Advanced menu. Select advanced display options
such as BrilliantColorTM, Degamma, Color Temp., Color Space,
Input Source, De-Interlace, and Exit. See page 26 for more
information.
English
24
User Controls
Image | Color Settings
Gain
Set RGB Gain to adjust the Brightness of the following Colors:
4 Red—increase or decrease the gain value for red.
4 Green—increase or decrease the gain value for green.
4 Blue—increase or decrease the gain value for blue.
Bias
Set RGB Bias to adjust the Contrast of the following Colors:
4 Red—increase or decrease the bias value for red.
4 Green—increase or decrease the bias value for green.
4 Blue—increase or decrease the bias value for blue.
Color
Set values to adjust the level of the following colors:
4 Yellow—increase or decrease the color value for yellow.
4 Cyan—increase or decrease the color value for cyan.
4 Magenta—increase or decrease the color value for magenta.
Reset
Reset all Color Setting values to the factory default.
25
English
User Controls
Image | Advanced
BrilliantColorTM
This adjustable item utilizes a new color-processing algorithm
and system level enhancements to enable higher brightness
while providing true, more vibrant colors in picture. The range
is from 0 to 10. If you prefer a stronger enhanced image, adjust
toward the maximum setting. For a smoother, more natural
image, adjust toward the minimum setting.
Degamma
This allows you to choose a degamma table that has been finetuned to bring out the best image quality for the input.
4 Film—for home theater.
4 Video—for video or TV source.
4 Graphics—for image source.
4 PC—for PC or computer source.
Color Temp.
Adjust the color temperature. Cold temperature, the screen looks
colder; with Warm temperature, the screen looks warmer.
Color Space
Select an appropriate color matrix type from AUTO, RGB, YUV.
Input Source
v De-interlace
only supports
480i/576i signal
via Video.
English
Enter the Input Source submenu. Select the sources to scan for
at startup. See page 27 for more information.
De-interlace
Press the cursor t or u button to select different De-interlace
modes. This function converts an interlaced video signal into
progressive signal.
26
4 On: Use this mode for Films.
4 Off: Use this mode for Video or TV sources.
User Controls
Image | Advanced | Input Source
Input Source
v If all sources are
deselected, the
projector cannot
display any
images. Always
leave at least one
source selected.
Use this option to enable / disable input sources.
to enable /
Press p or q to select a source, then press
disable it. The projector will not search inputs that are
de-selected.
27
English
User Controls
Display
Format
Use this function to choose your desired aspect ratio.
4 4:3: This format is for 4x3 input sources not enhanced for
Wide screen TV.
16:9
I: This format is for 16x9 input sources, like HDTV and
4
DVD enhanced for Wide screen TV.
4 16:9 II: The non-standard wide-screen display format of the
projector. Part of the original image will be cut if the image
aspect ratio is less than 1.67:1.
Native:
Depends on the resolution of the input source – No
4
scaling is performed.
4 Auto: Automatically selects the appropriate format.
English
28
User Controls
Display
Overscan
Overscan function removes the noise in a video image. Overscan the
image to remove video encoding noise on the edge of video source.
Zoom
4 Press t to reduce the size of the image.
4 Press u to magnify an image on the projected screen.
H Image Shift
Shifts the projected image position horizontally.
4 Press t to move the image left on the projected screen.
4 Press u to move the image right on the projected screen.
V Image Shift (16:9)
Shifts the projected image position vertically (in 16:9 format).
4 Press p to move the image up on the projected screen.
4 Press q to move the image down on the projected screen.
V Keystone
Press t or u to compensate for vertical image distortion when
the projector is positioned at an angle to the screen.
3D
Press t or u to enable or disable the 3D function. When the 3D
function is enabled, the current picture mode adjustment will be
disabled.
3D Sync invert
Press t or u to enable or disable the 3D Sync invert function to
invert images.
29
English
User Controls
Setup
Language
Enter the Language menu. Select the multilingual OSD menu.
See page 32 for more information.
Projection
Select projection method:
Front Desktop
4
The factory default setting.
Rear Desktop
4
When you select this function, the projector reverses the
image so you can project from behind a translucent screen.
Front Ceiling
4
When you select this function, the projector turns the image
upside down for ceiling-mounted projection.
Rear Ceiling
4
When you select this function, the projector reverses and
turns the image upside down at same time. You can project
from behind a translucent screen with ceiling mounted
projection.
Menu Location
Choose the menu location on the display screen.
English
30
User Controls
Setup
Signal
Enter the Signal menu. Set projector signal properties. See page
33 for more information.
Security
Enter the Security menu. Access the projector’s security features.
See page 34 for more information.
Projector ID
Select a two digit projector ID from 00 through 99.
Audio Settings
Enter the Audio Settings menu. Set audio level properties.
See page 37 for more information.
Advanced
Enter the Advanced menu. Select the screen display during
startup. See page 38 for more information.
31
English
User Controls
Setup | Language
Language
Choose the multilingual OSD menu. Press
into the sub
menu and then use the Left (t) or Right (u) key to select your
preferred language.
English
32
User Controls
Setup | Signal
Automatic
Enable or disable automatically selects the appropriate settings.
Frequency
Change the display data frequency to match the frequency
of your computer’s graphics card. If you experience a vertical
flickering bar, use this function to make an adjustment.
Phase
Phase synchronizes the signal timing of the display with the
graphics card. If you experience an unstable or flickering image,
use this function to correct it.
H. Position
4 Press t to move the image left.
4 Press u to move the image right.
V. Position
4 Press t to move the image down.
4 Press u to move the image up.
33
English
User Controls
Setup | Security
Security Timer
Enter the Security Timer sub menu.
v No password
is required to
access Setup |
Security unless
the Security
Timer or
Security Setting
are enabled.
English
Enter the Months, Days, and Hours that the projector can be
used without entering the password. Exiting to the Setup menu
activates the Security Timer.
Once activated, the projector requires a password on the
specified dates and times to allow power on and access to the
security menu.
If the projector is in use and the Security Timer is active, the
following screen displays 60 seconds before the password is
required.
34
User Controls
Setup | Security
Change Password
v If the incorrect
password is
entered three
times, the device
auto shutdowns
after 10 seconds.
Use this submenu to change the security password for the
projector.
1. Select Change Password from the Security submenu. The
Confirm Change Password dialog box displays.
2. Select Yes.
3. Enter the default password <1> <2> <3> <4> <5>.
A second password screen displays.
v If the new
passwords do
not match, the
password screen
redisplays.
4. Enter the new password twice for verification.
35
English
User Controls
Setup | Security
Security Settings
Enable or disable the security password.
4 Enabled—the current password is required to power on the
projector and access the Security menu.
4 Disabled—no password is required for any function.
When security is enabled, the following screen displays at startup
and before access to the Security menu is allowed:
English
36
User Controls
Setup | Audio Settings
Volume
Press t to decrease the volume of voice.
Press u to increase the volume of voice.
Mute
Toggle the audio on or off.
4 Off—the speaker volume is turned on.
4 On–the speaker volume is turned off.
37
English
User Controls
Setup | Advanced
Logo
Select the screen to display during startup.
4 Optoma—the supplied default startup screen.
4 Neutral—Screen with black color.
Closed Captioning
Select the screen to display closed captioning
4 Off–the supplied default setting.
4 On–closed captioning text is displayed if available.
English
38
User Controls
Options
Source Lock
Lock the current source as the only available source, even if the
cable is unplugged.
4 On—only the current source is recognized as an input source.
4 Off—all sources selected in Image | Advanced | Input Source
are recognized as an input source.
High Altitude
Adjust the fan speed to reflect the environment.
4 On—increases fan speed for high temperature, humidity, or
altitude.
4 Off—regular fan speed for normal conditions.
Information Hide
Suppress informational messages on the projected screen.
4 On—no status messages appear on screen during operation.
4 Off— status messages appear as normal on screen during
operation.
39
English
User Controls
Options
Background Color
Select the desired background color for the projected image
when no source is detected.
Advanced
Enter the Advanced menu. See page 41 for more details.
Lamp Settings
Enter the Lamp Settings menu. See pages 42-43 for more
details.
Reset
Reset all Options to default factory settings.
English
40
User Controls
Options | Advanced
Direct Power On
Enable or disable Direct Power On.
4 On—the projector powers on automatically when AC power is
supplied.
4 Off— the projector must be powered on as normal.
Signal Power On
Enable or disable Signal Power On.
4 On—the projector turns on automatically when an active signal
is detected.
Off—
the projector can be turned on by pressing the “Power” button.
4
Auto Power Off (min)
Set the Auto Power Off interval. The projector powers off the
lamp after 30 minutes of no signal by default. The following
warning is displayed 60 seconds before power off.
Sleep Timer (min)
Set the Sleep Timer interval. The projector powers off after the
specified time period of inactivity (regardless of signal). The
following warning is displayed 60 seconds before power off.
Power Mode (Standby)
4 Eco.: Choose “Eco.” to save power dissapation further <1W.
4 Active: Choose “Active” to return to normal standby.
41
English
User Controls
Options | Lamp Settings
Lamp Hours
Displays the number of hours the lamp has been active. This
item is for display only.
Lamp Reminder
Enable or disable the lamp life span reminder.
4 On—a warning message displays when remaining lamp life is
less than 30 hours.
4 Off—no warning message displays.
Brightness Mode
Select the lamp brightness mode.
4 Bright—the default setting.
4 STD—lower brightness setting to conserve lamp life.
English
42
User Controls
Options | Lamp Settings
Lamp Reset
After replacing the lamp, reset the lamp counter to accurately
reflect the new lamp’s life span.
1. Select
.
A confirmation screen displays.
2. Select
to reset the lamp counter to zero.
43
English
Appendices
Troubleshooting
If you experience a problem with your projector, please refer to the
following information. If a problem persists, please contact your local
reseller or service center.
Image
4 Ensure all the cables and power connections are correctly and
section.
securely connected as described in the
4 Ensure all the pins of connectors are not bent or broken.
4 Check if the projection lamp has been securely installed.
section.
Please refer to the
4 Press “Re-Sync” on the remote.
4 If you are using a PC:
For Windows 95, 98, 2000, XP:
1. Open the
icon, the
then double click on the
icon.
2. Select the
folder, and
tab.
3. Verify that your display resolution setting is lower than or
equal to UXGA (1600 x 1200).
4. Click on the
button.
If the projector is still not projecting the whole image, you
will also need to change the monitor display you are using.
Refer to the following steps.
5. Verify the resolution setting is lower than or equal to UXGA
(1600 x 1200).
6. Select the Change button under the
tab.
7. Click on
. Next, select
under the SP box; choose the resolution mode you
need under the “Models” box.
8. Verify that the resolution setting of the monitor display is
lower than or equal to UXGA (1600 x 1200). (*)
English
44
Appendices
4 If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. Example: [Fn]+[F4]
Acer �
Asus �
Dell �
Gateway �
[Fn]+[F5]
[Fn]+[F8]
[Fn]+[F8]
[Fn]+[F4]
IBM/Lenovo � [Fn]+[F7]
HP/Compaq � [Fn]+[F4]
NEC �
[Fn]+[F3]
Toshiba �
[Fn]+[F5]
Mac Apple:
System Preference � Display � Arrangement � Mirror
display
If you experience difficulty changing resolutions or your
monitor freezes, restart all equipment including the projector.
45
English
Appendices
4 If you are using a Notebook:
Some Notebooks may deactivate their own screens when a
second display device is in use. Each has a different way to
be reactivated. Refer to your computer’s manual for detailed
information.
to correct it. See page 33 for more information.
4 Use
Change
the
monitor color setting on your computer.
4
to make an adjustment. See page 33 for more
4 Use
information.
4 Check and reconfigure the display mode of your graphic card
to make it compatible with the projector.
4 Adjusts the Focus Ring on the projector lens.
4 Make sure the projection screen is between the required
distances from the projector. See page 18 for more
information.
When you play anamorphic DVD or 16:9 DVD, the projector will
show the best image in 16:9 format in OSD. If you play 4:3 format
DVD title, please change the format as 4:3 in projector OSD. If the
image is still stretched, you will also need to adjust the aspect ratio
by referring to the following:
4 Please setup the display format as 16:9 (wide) aspect ratio
type on your DVD player.
4 Move the projector closer to or further from the screen.
4 Press [Menu] button on the remote control or projector panel,
and try the different settings.
go to
English
46
Appendices
v Use of Keystone
is not
recommended.
4 If possible, reposition the projector so that it is centered on the
screen and below the bottom of the screen.
4 Press [Keystone +/-] on the remote control until the sides are
vertical.
4 Select
projection direction.
from the OSD and adjust the
Other
4 If possible, turn off the projector, then unplug the power cord
and wait at least 60 seconds before reconnecting power.
4 When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the
projector will not turn on until the lamp module has been
replaced. To replace the lamp, follow the procedures in
Replacing the Lamp on page 49.
47
English
Appendices
Projector LED Status Indicatior
Power LED
Lamp LED
(Green)
(Red)
Standby
2.5 sec dark
1 sec light
O
Warm up
0.5 sec dark
0.5 sec light
O
Message
Operating
O
1.0 sec dark
1.0 sec light
O
Over Temp
3
O
Lamp Fail
O
Thermal Break
Status Error
4
O
Lamp Door Sensor
Detect High
7
O
Fan 1 error
(Lamp Fan)
6
1
Fan 2 error
(Power Fan)
6
2
Color Wheel Error
9
O
Cooling down
Steady light �
No light �
The digit represents the number of led blinks.
English
48
Appendices
Message Reminders
4 Replacing the lamp:
4 Out of range: (see the following for more information)
Remote Control
If the remote control does not work
4 Check the operating angle for the remote control is
approximately ±15°.
4 Make sure there are no obstructions between the remote
control and the projector. Move to within 7m (23 ft) of the
projector.
4 Make sure the batteries are inserted correctly.
4 Replace weak batteries in the remote control.
Audio Problems
There is no sound
4 Adjust the volume on the remote control.
4 Adjust the volume of the audio source.
4 Check the audio cable connection.
4 Test the source audio output with other speakers.
4 Have the projector serviced.
The sound is distorted
4 Check the audio cable connection.
4 Test the source audio output with other speakers.
4 Have the projector serviced.
49
English
Appendices
Replacing the Lamp
The projection lamp should be replaced when it burns out. It should
only be replaced with a certified replacement part, which you can
order from your local dealer.
Important:
4 The lamp contains a certain amount of mercury and should be
disposed of according to local ordinance regulations.
Avoid
touching the glass surface of the new lamp, doing so
4
may shorten its operation life.
Warning:
4 Be sure to turn off and unplug the projector at least an hour
before replacing the lamp. Failure to do so could result in a
severe burn.
English
50
1
2
3
4
5
6
Appendices
Replacing the Lamp
1. Loosen the captive screws on the lamp compartment cover.
2. Remove the lamp compartment cover.
3. Remove the three screws from the lamp module.
4. Lift the module handle up and disconnect the lamp connector
then pull firmly on the module handle to remove the lamp
module.
5. Reverse steps 1 to 4 to install the new lamp module. While
installing, align the lamp module with the connector and ensure it
is level to avoid damage.
The lamp module must sit securely in place and the lamp
connector must be connected properly before tightening the
screws.
6. Replace the lamp compartment lid and tighten the captive screw.
After replacing the lamp, the lamp hours counter must be reset.
See page 42 for more information.
Warning:
4 Lamp Connector must be installed flush with the connector
base as shown in the image below. A gap between the Lamp
Connector and the connector base will cause damage to the
projector.
The following images illustrate correct and incorrect Lamp
Connector installations.
No Gap
Gap
Correct
Incorrect
51
English
Appendices
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure
trouble-free operation.
Warning:
4 Be sure to turn off and unplug the projector at least an hour
before cleaning. Failure to do so could result in a severe burn.
Use
only a dampened cloth when cleaning. Do not allow water
4
to enter the ventilation openings on the projector.
4 If a little water gets into the projector interior while cleaning, leave
unplugged in a well-ventilated room for several hours before using.
If
4 a lot of water gets into the projector interior when cleaning, have
the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores.
Refer to the following to clean the projector lens.
1. Apply a little optic lens cleaner to a clean soft cloth.
(Do not apply the cleaner directly to the lens.)
2. Lightly wipe the lens in a circular motion.
Caution:
4 Do not use abrasive cleaners or solvents.
4 To prevent discoloration or fading, avoid getting cleaner on the
projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as
used to wash dishes), and then wipe the case.
3. Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive
alcohol-based cleaners.
English
52
Appendices
Compatibility Modes
Computer Compatibility
Signal
Resolution
Refresh Rate (Hz)
NTSC
-
60
PAL/SECAM
-
50
VESA
640 x 350
70.1/ 85.1
640 x 400
70.1 / 85.1
VGA
SVGA
v For wide screen
resolution
(WXGA), the
compatibility
support is
dependent on
Notebook/PC
models.
Please note that
using resolutions
other than native
(800 x 600) may
result in some
loss of image
clarity.
XGA
HD720
720 x 350
70
720 x 400
70/ 85
720 x 576
50/ 60
640 x 480
60/ 67/ 72.8/ 75/ 85
800 x 600
56.3/ 60.3/ 75/ 72.2/
80/ 85.1/ 120
832 x 624
72/ 75
1024 x 576
50/ 60
1024 x 768
60/ 70.1/ 72/ 75/ 85/ 120
1152 x 864
60/ 70/ 75/85
1280 x 720
50/ 60/ 75/ 85/ 120
WXGA
1280 x 768
60/ 70/ 75/ 85
WXGA-800
1280 x 800
60
SXGA
1280 x 1024
60/ 75/85
SXGA+
1400 x 1050
60
UXGA
1600 x 1200
60
HDTV
SDTV
1600 x 1050
60
1920 x 1080
25/30
1920 x 1080i
50/ 60
1920 x 1080p
24/25/30/50/ 60
1280 x 720
60
1280 x 720p
50/ 60
720 x 576
50
720 x 576i
50
53
English
Appendices
Signal
Resolution
Refresh Rate (Hz)
720 x 576p
50
720 x 480
60
720 x 480i
60
720 x 480p
60
Apple Mac Compatibility
Macbook
Macbook Pro
(Intel)
Power Mac
G5
Power Mac
G4
Hz-
Analog
Analog
Analog
Analog
800x600
60
o
o
-
-
800x600
72
o
o
o
o
800x600
75
o
o
o
o
800x600
85
o
o
o
o
1024x768
60
o
o
o
o
1024x768
70
o
o
o
o
1024x768
75
o
o
o
o
1024x768
85
o
o
o
o
1280x720
60
o
o
o
o
1280x720
75
o
o
-
o
Resolution
English
1280x720
85
o
o
-
o
1280x768
60
o
o
-
o
1280x768
75
o
o
o
o
1280x768
85
o
o
-
o
1280x800
60
o
o
o
o
1280x1024
60
-
o
o
o
1280x1024
75
-
o
o
-
1680x1050
60
o
o
-
-
1920x1200
60
o
o
-
-
54
Appendices
RS232 Commands
RS232 Connector (projector side)
9
5
8
4
7
3
6
2
1
N/A
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
N/A
1
55
English
Appendices
RS232 Protocol Function List
RS232 Command Table
Baud Rate
9600
Data Bits
8
Parity Check
None
Stop Bits
1
Flow Control
None
UART16550 FIFO
Lead Code
Disable
Projector ID
~
X
Command ID
X
X
X
space
X
variable
carriage return
n
CR
Defined by Optoma
Set in OSD
Fix code
00~99
2 or 3 Digit
One
Per item
Fix code
One Digit
Two Digit
See the Follow content
Digit
Definition
One digit
Keypad Command
Function
ASCII
Power
On/Off
n=1/n=0 & n=2 ~XX00 n
Power On with Password
Resync
n=1
Pass
Fail
P
F
~XX00 1 ~nnnnn
P
F
~XX01 n
P
F
AV Mute
On/Off
n=1/n=0 & n=2 ~XX02 n
P
F
Mute
On/Off
n=1/n=0 & n=2 ~XX03 n
P
F
n=1/n=2
~XX04 n
P
F
~XX12 n
P
F
Freeze/Unfreeze
Direct Source Selection
VGA 1
n=5
VGA 1 SCART
n=7
VGA 1 Component
n=8
Video
n=10
OSD/Image
Function
Display Mode
ASCII
Presentation
ʳ
n=1
~XX20 n
Bright
ʳ
n=2
ʳ
Movie
ʳ
n=3
ʳ
sRGB
ʳ
n=4
ʳ
Classroom
ʳ
n=7
ʳ
Blackboard
ʳ
n=8
ʳ
User
English
56
ʳ
Fail
P
F
P
F
n=5
3D
Brightness
Pass
n=11
ʳ
n= -50 - +50
~XX21 n
Appendices
Pass
Fail
Contrast
ʳ
Function
ʳ
n= -50 - +50
~XX22 n
ASCII
P
F
Sharpness
ʳ
ʳ
n= -15 - +15
~XX23 n
P
F
n= -50 - +50
~XX45 n
P
F
Saturation
Tint
n= -50 - +50
~XX44 n
P
F
Red Gain
ʳ
n= -50 - +50
~XX24 n
P
F
Green Gain
ʳ
n= -50 - +50
~XX25 n
P
F
Blue Gain
ʳ
n= -50 - +50
~XX26 n
P
F
n= -50 - +50
~XX27 n
P
F
Red Bias
Color Setting
Green Bias
n= -50 - +50
~XX28 n
P
F
Blue Bias
n= -50 - +50
~XX29 n
P
F
Cyan
n= -50 - +50
~XX30 n
P
F
Yellow
n= -50 - +50
~XX31 n
P
F
Magenta
n= -50 - +50
~XX32 n
P
F
Reset
ʳ
n=1
~XX33 n
P
F
BrilliantColorTM
ʳ
n= 0 - 10
~XX34 n
P
F
Film
n=1
~XX35 n
P
F
Video
n=2
Graphics
n=3
ʳ
PC
n=4
ʳ
P
F
P
F
P
F
P
F
Pass
Fail
P
F
Degamma
IMAGE
Color Temp.
/Advanced
Color Space
Input Source
De-Interlace
Warm
n=1
~XX36 n
Medium
n=2
ʳ
Cold
n=3
ʳ
Auto
n=1
~XX37 n
RGB
n=2
ʳ
YUV
n=3
ʳ
VGA 1
n=5
~XX39 n
Video
n=10
ʳ
On
n=1
~XX40 n
Off
n=2
ʳ
OSD/Display
Function
Format
ASCII
4:3
n=1
~XX60 n
16:9-I
n=2
ʳ
16:9-II
n=3
Native
n=6
Auto
n=7
ʳ
57
English
Appendices
Function
ASCII
Pass
Fail
Overscan
ʳ
n=0-10
~XX61 n
P
F
Zoom
ʳ
n= -30~+50
~XX62 n
P
F
H Image Shift
ʳ
n= -50 - +50
~XX63 n
P
F
V Image Shift (16:9)
ʳ
n= -24 - +24
~XX64 n
P
F
F
V Keystone
3D
3D Sync Invert
ʳ
n= -30 - +30
~XX66 n
P
Off
n=1
~XX230 n
P
F
DLP Link
n=2
P
F
IR
n=3
P
F
On/Off
n=1/n=2 &0
P
F
~XX231 n
OSD/Setup
Function
ASCII
English
ʳ
n=1
~XX70 n
German
ʳ
n=2
ʳ
French
ʳ
n=3
Italian
ʳ
n=4
ʳ
Spanish
ʳ
n=5
ʳ
Portuguese
ʳ
Polish
Language
English
58
Fail
P
F
P
F
n=6
n=7
Dutch
n=8
Swedish
n=9
Norwegian/Danish
n=10
Finnish
n=11
Greek
n=12
Traditional Chinese
n=13
Simplified Chinese
n=14
Japanese
n=15
Korean
n=16
Russian
n=17
Hungarian
n=18
Czechoslovak
n=19
Arabic
n=20
Thai
n=21
Turkish
Projection
Pass
n=22
Front-Desktop
ʳ
n=1
~XX71 n
Rear-Desktop
ʳ
n=2
ʳ
Front-Ceiling
ʳ
n=3
ʳ
Appendices
Function
ʳ
n=4
ʳ
Top Left
ʳ
n=1
~XX72 n
Top Right
ʳ
n=2
ʳ
ʳ
Security
Projector ID
Audio Settings
Advanced
Pass
Fail
P
F
ʳ
n=3
Bottom Left
ʳ
n=4
ʳ
Bottom Right
ʳ
n=5
ʳ
Automatic
Enable/Disable
n=1/n=0 & n=2 ~XX91 n
P
F
Frequency
ʳ
n= 0~31
~XX73 n
P
F
Phase
ʳ
n= -5 - +5
~XX74 n
P
F
H. Position
ʳ
n= -5 - +5
~XX75 n
P
F
V. Position
ʳ
n= -5 - +5
~XX76 n
P
F
Security Timer
Hour/Day/Month
nnnnnn
~XX77 n
P
F
Menu Location Center
Signal
ASCII
Rear-Ceiling
send back
Change
Password
the password
ʳ
ʳ
to confirm
Security Settings
On/Off
n=1/n=0 & n=2 ~XX78 n
P
F
ʳ
ʳ
n=00-99
~XX79 n
P
F
Mute
On/Off
n=1/n=2 &0
~XX80 n
P
F
Volume
ʳ
n=0-10
~XX81 n
P
F
Logo
Optoma/Neutral
n=1/n=2
~XX82 n
P
F
n=1/n=0 & n=2 ~XX88 n
P
F
Closed Captioning
On/Off
OSD/Option
Pass
Fail
Source Lock
ʳ
Function
On/Off
n=1/n=2 &0 ~XX100 n
P
F
High Altitude
ʳ
On/Off
n=1/n=2 &0 ~XX101 n
P
F
On/Off
n=1/n=2 &0 ~XX102 n
P
F
Blue
ʳ
n=1
~XX104 n
P
F
Black
ʳ
n=2
ʳ
Red
ʳ
n=3
ʳ
Green
ʳ
n=4
ʳ
White
ʳ
n=5
ʳ
Information
Hide
Background
Color
Advanced
ʳ
ASCII
Direct Power On
On/Off
n=1/n=2 &0 ~XX105 n
P
F
Signal Power On
On/Off
n=1/n=2 &0 ~XX113 n
P
F
n=0-180
P
F
Auto Power Off
(min)
ʳ
~XX106 n
59
English
Appendices
Function
ASCII
Sleep Timer (min)
ʳ
Power
ECO/Active n=1/n=2 &0
Mode(Standby)
ʳ
Lamp Hour
Lamp Setting
Fail
P
F
n=1
~XX114 n
P
F
~XX108 n
nnnn
F
Lamp Reminder
On/Off
n=1/n=2 &0 ~XX109 n
P
F
Brightness Mode
Bright/STD
n=1/n=2
~XX110 n
P
F
P
F
P
F
Lamp Reset
Reset
Pass
n=000-995 ~XX107 n
ʳ
Yes
n=1
~XX111 n
No
n=2
ʳ
Yes
n=1
~XX112 n
No
n=2
ʳ
Information Format:
INFOa
Standby Mode
ʳ
Warming up
a=0
a=1
ʳ
Cooling Down
a=2
ʳ
Out of Range
a=3
ʳ
Lamp Fail
a=4
ʳ
Thermal Switch Error
a=5
ʳ
Fan Lock
a=6
ʳ
Over Temperature
a=7
Lamp Hours Running
ʳ
Out
a=8
RS232
command
Response
ʳ
ʳ
display
~XX150 1
Okabbbbccdddde ʳ
ʳ
ʳ
ʳ
a = Power State
On
a=1
ʳ
ʳ
ʳ
Off
a=0
ʳ
ʳ
b = Lamp Hour
ʳ
bbbb
ʳ
ʳ
c = Input Source
None
c=0
ʳ
ʳ
ʳ
VGA
c=1
ʳ
ʳ
ʳ
Video
c=2
ʳ
ʳ
Version
ʳ
dddd
ʳ
ʳ
e = Display mode
None
e=0
ʳ
ʳ
ʳ
Presentation
e=1
Function
Information
d = Firmware
English
60
Appendices
RS232
Function
command
Response
ʳ
ʳ
ʳ
ʳ
ʳ
Bright
e=2
ʳ
ʳ
ʳ
Movie
e=3
ʳ
ʳ
ʳ
sRGB
e=4
ʳ
ʳ
ʳ
Blackboard
e=5
ʳ
ʳ
ʳ
Classroom
e=6
ʳ
ʳ
ʳ
User
e=7
ʳ
ʳ
ʳ
3D
e=8
Input Source
~XX121 1
Oka
None
a=0
ʳ
ʳ
VGA
a=1
ʳ
ʳ
Video
a=2
Software Version ~XX122 1
Okdddd
ʳ
ʳ
Display Mode
~XX123 1
Oka
None
a=0
ʳ
ʳ
ʳ
Presentation
a=1
ʳ
ʳ
ʳ
Bright
a=2
ʳ
ʳ
ʳ
Movie
a=3
ʳ
ʳ
ʳ
sRGB
a=4
ʳ
ʳ
ʳ
Blackboard
a=5
ʳ
ʳ
ʳ
Classroom
a=6
ʳ
ʳ
ʳ
User
a=7
ʳ
ʳ
ʳ
3D
Power State
~XX124 1
Oka
On
a=1
ʳ
ʳ
ʳ
Off
a=0
Brightness
~XX125 1
Oka
ʳ
Contrast
~XX126 1
Oka
ʳ
Aspect Ratio
~XX127 1
Oka
ʳ
ʳ
ʳ
ʳ
a=8
ʳ
ʳ
4:3
a=0
ʳ
16:9-I
a=1
ʳ
ʳ
16:9-II
a=2
ʳ
ʳ
Native
a=3
Auto
a=4
Color
Temperature
~XX128 1
Oka
ʳ
ʳ
ʳ
Warm
a=0
Medium
a=1
ʳ
ʳ
ʳ
Cold
a=2
Projection Mode
~XX129 1
Oka
Front-Desktop
a=0
ʳ
ʳ
ʳ
Rear-Desktop
a=1
61
English
Appendices
RS232
62
ʳ
command
Response
ʳ
ʳ
ʳ
Front-Ceiling
ʳ
ʳ
ʳ
Rear-Ceiling
Model Name
~XX151 1
Oka
RS232 Version No ~XX152 1
Oka
ʳ
Item
English
ʳ
Function
ES515
Key Definition
ASCII
a=2
a=3
a=1
ʳ
Pass
Fail
1
Power
n=1
~XX140 n
P
F
2
Left
n=11
ʳ
P
F
3
Enter
n=12
ʳ
P
F
4
Right
n=13
ʳ
P
F
5
Down
n=14
ʳ
P
F
6
Keystone +/1
n=15
ʳ
P
F
7
Keystone -/3
n=16
ʳ
P
F
8
Zoom +/2
n=28
ʳ
P
F
9
Zoom -/5
n=29
ʳ
P
F
10
Freeze/4
n=23
ʳ
P
F
11
Source/6
n=30
ʳ
P
F
12
AV-Mute/7
n=24
ʳ
P
F
13
Resync/8
n=31
ʳ
P
F
14
Menu
n=20
P
F
15
Up
n=10
P
F
Appendices
Ceiling Installation
To prevent damage to your projector please use the recommended
mounting package for installation.
v Damage to the
projector as a
result of incorrect
installation voids
the warranty.
To ensure compliance, only use a UL Listed ceiling mount and
screws that meet the following specifications:
4 Screw Type: M4
4 Maximum screw length: 8 mm
4 Minimum screw length: 6 mm
Refer to the following diagram to ceiling mount the projector.
159.90
56.90
v Avoid locating the
projector near
heat sources
such as air
conditioning and
heaters. Excess
heat may cause
the projector to
power off.
103.00
v Ensure at least
10cm clearance
between the
ceiling and the
underside of the
projector.
5.00
42.50
97.50
LENS
63
English
Appendices
Optoma Global Offices
For service or support please contact your local office.
USA
715 Sycamore Drive
Milpitas, CA 95035, USA
www.optomausa.com
Tel : 408-383-3700
Fax : 408-383-3702
Service : [email protected]
5630 Kennedy Road, Mississauga,
ON, L4Z 2A9, Canada
www.optoma.ca
Tel : 905-361-2582
Fax : 905-361-2581
Service : [email protected]
Canada
Europe
42 Caxton Way, The Watford Business Park
Watford, Hertfordshire,
WD18 8QZ, UK
Tel : +44 (0) 1923 691 800
www.optoma.eu
Fax : +44 (0) 1923 691 888
Service : [email protected]
Service Tel : +44 (0)1923 691865
France
Bâtiment E
81-83 avenue Edouard Vaillant
92100 Boulogne Billancourt, France
Tel : +33 1 41 46 12 20
Fax : +33 1 41 46 94 35
Service : [email protected]
C/ José Hierro,36 Of. 1C
28522 Rivas VaciaMadrid,
Spain
Tel : +34 91 499 06 06
Fax : +34 91 670 08 32
Werftstrasse 25
D40549 Düsseldorf,
Germany
Tel : +49 (0) 211 506 6670
Fax : +49 (0) 211 506 66799
Service : [email protected]
Lerpeveien 25
3040 Drammen
Norway
PO.BOX 9515
3038 Drammen
Norway
Tel : +4732988990
FAX : +4732988999
Service : [email protected]
Spain
Deutschland
Optoma Scandinavia AS
English
64
Appendices
Latin America
715 Sycamore Drive
Milpitas, CA 95035, USA
www.optoma.com.br
Taiwan
231,台北縣新店市民權路108號5樓
電話：+886-2-2218-2360
服務處：[email protected]
Hong Kong
Tel : 408-383-3700
Fax: 408-383-3702
www.optoma.com.mx
傳真：+886-2-2218-2313
www.optoma.com.tw
asia.optoma.com
Unit A, 27/F Dragon Centre, 79 Wing Hong Street,
Cheung Sha Wan Kowloon, Hong Kong
Tel : +852-2396-8968
Fax: +852-2370-1222
www.optoma.com.hk
China
上海市长宁区凯旋路1205号5楼
邮编: 200052
www.optoma.com.cn
电话：+86-21-62947376
传真：+86-21-62947375
東京都足立区綾瀬 3-25-18
サポートセンター: 0120-46-5040
株式会社オーエスエム
E-Mail: [email protected]
http://www.os-worldwide.com/
Japan
Korea
WOOMI TECH.CO.,LTD.
4F, Minu Bldg.33-14, Nonhyun-Dong,
Kangnam-Ku, seoul, 135-815,
KOREA
Tel : +82+2+34430004
Fax: +82+2+34430005
65
English
Appendices
Regulation & Safety notices
This appendix lists the general notices of your projector.
FCC notice
This device has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference
to radio or television reception, which can be determined by turning
the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
4 Reorient or relocate the receiving antenna.
4 Increase the separation between the device and receiver.
4 Connect the device into an outlet on a circuit different from that
to which the receiver is connected.
4 Consult the dealer or an experienced radio/television technician
for help.
Notice: Shielded cables
$OO FRQQHFWLRQV WR RWKHU FRPSXWLQJ GHYLFHV PXVW EH
PDGH XVLQJ VKLHOGHG FDEOHV WR PDLQWDLQ FRPSOLDQFH
ZLWK)&&UHJXODWLRQV
Caution
&KDQJHVRUPRGLᚏFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKH
PDQXIDFWXUHUFRXOGYRLGWKHXVHUಬVDXWKRULW\ZKLFKLV
JUDQWHGE\WKH)HGHUDO&RPPXQLFDWLRQV&RPPLVVLRQ
WRRSHUDWHWKLVSURMHFWRU
English
66
Appendices
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la norme
NMB-003 du Canada.
Declaration of Conformity for EU countries
4 EMC Directive 2004/108/EC (including amendments)
4 Low Voltage Directive 2006/95/EC
4 R & TTE Directive 1999/5/EC (if product has RF function)
67
English