MicroSurvey GPS Controller, FieldGenius User manual
Below you will find brief information for GPS Controller, FieldGenius. This document provides instructions on how to start the GPS Controller software and how to create and configure a GPS profile in FieldGenius. FieldGenius gives you an easy way to start using the NEMA string to compute a GPS position in order to effectively work with the software.
advertisement
Start GPS Controller
1. In the Start | Programs menu, you will find a program called GPS Controller. Start this program before starting FieldGenius.
2. The GPS Controller software will try to resolve a position. Once you get a position you can start FieldGenius.
3. Start FieldGenius by going to the Start | Programs menu and select FieldGenius. You will need to create a GPS profile to use.
4. In the Select GPS Mode Screen, select Start Rover and then on the Select GPS Profile screen create a new profile. In our example we created one named “Geo XT”.
5. You now need to edit the profile which will take you to the GPS configuration screen.
6. You can use the following screen shots as a quick guide to get started. It is important to take the time to understand how the tolerance modes affect FieldGenius. You can set these based on the type of work you are going to be doing.
7. Now you can press the Connect button on the Select GPS Profile screen. This will configure
FieldGenius to start using the NEMA string to compute a GPS position.
advertisement
Key Features
- Start GPS Controller software
- Start FieldGenius software
- Create and configure a GPS profile
- Connect FieldGenius to GPS
- Use NEMA string to compute a GPS position
- Specify tolerance modes to affect FieldGenius
- Work with the software
Frequently Answers and Questions
How do I start the GPS Controller software?
How do I create a GPS profile in FieldGenius?
How do I connect FieldGenius to GPS?
Related manuals
advertisement
