CITROËN C4 Picasso Connect Nav car media receiver User manual

AUDIO AND TELEMATICS GUIDE

Transversal-Citroen_en_Chap00_debut

On-line handbook

Select one of the following means of access to view your handbook online...

Find your handbook and the audio and telematic systems on the

CITROËN website, under "MyCITROËN".

If the "MyCITROËN" function is not available on the CITROËN public website for your country, you can fi nd your handbook at the following address:

http://service.citroen.com/ddb/

Select:

the language,

the vehicle, its body style,

the print edition of your handbook appropriate for the date of registration of your vehicle.

Referring to the handbook on-line also gives you access to the latest information available, easily identifi ed by the bookmark, associated with this symbol:

Transversal-Citroen_en_Chap00_debut

Audio and Telematics

CITROËN Connect Nav

First steps

Steering mounted controls

Contents

2

5

Menus 6

Voice commands

Navigation

8

14

Connected navigation

Applications

30

40

Radio Media 54

Telephone 66

Settings 78

Frequently asked questions 88

The different functions and settings described vary according to the version and configuration of your vehicle.

As a safety measure and because it requires sustained attention by the driver, the pairing of a Bluetooth mobile telephone with the Bluetooth handsfree system of your audio system must be done with the

vehicle stationary

and the ignition on.

The system is protected in such a way that it will only operate in your vehicle.

Displaying of the

Energy Economy

Mode message signals that a change to standby is imminent.

The link below gives access to OSS

(Open Source Software) codes for the system.

http://www.psa-peugeot-citroen.com/oss

.

1

2


First steps

With the engine running, a press mutes the sound.

With the ignition off, a press turns the system on.

Volume.

Use the buttons either side of or below the touch screen for access to the menus, then press the virtual buttons in the touch screen. All of the touch areas of the screen are white.

Press the cross to go back a level.

Press "OK" to confirm.

The touch screen is of the "capacitive" type.

To clean the screen, use a soft, nonabrasive cloth (spectacles cloth) with no additional product.

Do not use sharp objects on the screen.

Do not touch the screen with wet hands.

23 °C 18,5

FM/87.5 MHz

87.5MHz

21,5 12:13


Certain information is displayed permanently in the upper band of the touch screen:

- Reminder of the air conditioning information and direct access to the corresponding menu.

- Go directly to the selection of the audio source, to the list of radio stations (or list of titles depending on the source).

- Go to the message notifications, emails, map updates and, depending on the services, the navigation notifications.

- Go to the settings for the touch screen and the digital instrument panel.

Select the audio source (depending on version):

- FM / DAB * / AM * radio stations.

- USB memory stick.

- CD player.

- Media player connected via the auxiliary socket (Jack, cable not supplied).

- Telephone connected by Bluetooth * using

Bluetooth * audio streaming.

23 °C 18,5 21,5 12:13

In the "Settings" menu you can create a profile for just one person or a group of people with common points, with the possibility of entering a multitude of settings (radio presets, audio settings, navigation history, contact favourites, ...); these settings are taken into account automatically.

In very hot conditions, the volume may be limited to protect the system. It may go into standby (screen and sound off) for at least 5 minutes.

The return to normal takes place when the temperature in the passenger compartment has dropped.

* Depending on equipment.

.

3

Steering mounted controls

Voice commands :

Short press, system voice commands.

Long press, smartphone voice commands via the system.

Increase volume.

Mute / Restore the sound.

Or

Mute by pressing the volume increase and decrease buttons simultaneously.

Restore the sound by pressing one of the two volume buttons.

Decrease volume.

Media (short press): change the multimedia source.

Telephone (short press): call.

Call in progress (short press): access to telephone menu.

Telephone (long press): reject an incoming call, end call, access to telephone menu.


Radio (rotate): automatic search for the previous / next station.

Media (rotate): previous / next track, move in a list.

Short press : confirm a selection; other than selection, access to presets.

Radio : display the list of stations.

Media : display the list of tracks.

Radio (press and hold): update the list of stations received.

.

5


Menus

According to version

Air conditioning

23 °C 12:13

18,5 21,5

Connected navigation

23 °C 18,5 21,5 12:13

Applications

23 °C 18,5 21,5 12:13

Manage the various temperature and air flow settings.

Driving

23 °C 18,5 21,5 12:13

Enter navigation settings and choose a destination.

Use services available in real time, depending on equipment.

Operate certain applications on a smartphone connected via CarPlay or MirrorLink

TM

Check the state of the Bluetooth

®

and Wi-Fi connections.

®

or MirrorLink .

and Wi-Fi

6

Activate, deactivate and configure certain vehicle functions.

Radio Media

23 °C 18,5

FM/87.5 MHz

87.5MHz

21,5 12:13

Telephone

23 °C 18,5 21,5 12:13

Settings

23 °C 18,5


21,5 12:13

Select an audio source, a radio station, display photographs.

Connect a telephone by Bluetooth

®

, read messages and emails and send quick messages.

Configure a personal profile and/or configure the sound (balance, ambience, ...) and the display (language, units, date, time, ...).

.

7

8


Voice commands

Steering mounted controls

Pressing this button activates the voice commands function.

To ensure that voice commands are always recognised by the system, please observe the following recommendations:

- speak in a normal tone without breaking up words or raising your voice.

- always wait for the "beep" (audible signal) before speaking.

- for best operation, it is recommended that the windows and opening roof be closed to avoid extraneous interference

(according to version).

- before making a voice command, ask other passengers to not speak.

First steps

Example of a "voice command" for navigation:

"Navigate to address 11 Regent

Street, London" .

Example of a "voice command" for the radio and media:

"Play artist Madonna" .

Example of a "voice command" for the telephone:

"Call David Miller" .

The voice commands, with a choice of 12 languages (English, French,

Italian, Spanish, German, Dutch,

Portuguese, Polish, Turkish, Russian,

Arabic, Brazilian), are made using the language previously chosen and set in the system.

Alternative synonyms can be used for some voice commands.

E.g. Guide to / Navigate to / Go to /...

The voice commands in Arabic for:

"Navigate to address" and "Display POI in the city", are not available.

Information - Using the system

Press the Push To Talk button and tell me what you'd like after the tone. Remember you can interrupt me at any time by pressing this button. If you press it again while I'm waiting for you to speak, it'll end the conversation. If you need to start over, say "cancel".

If you want to undo something, say

"undo". And to get information and tips at any time, just say "help". If you ask to me do something and there's some information missing that I need, I'll give you some examples or take you through it step by step. There's more information available in "novice" mode.

You can set the dialogue mode to

"expert" when you feel comfortable.


Global voice commands

These commands can be made from any screen page after pressing the "Voice command" or "Telephone" button located on the steering wheel, as long as there is no telephone call in progress.

Help message "Voice command"

Help

Voice command help

Navigation help

Radio help

Media help

Telephone help

Set dialogue mode as <...>

Select profile <...>

Yes

No

There are lots of topics I can help you with.

You can say: "help with phone", "help with navigation", "help with media" or "help with radio". For an overview on how to use voice controls, you can say "help with voice controls".

Select "beginner" or "expert" mode.

Select profile 1, 2 or 3.

Say "yes" if I got that right. Otherwise, say "no" and we'll start that again.

.

9

10


"Navigation" voice commands

These commands can be issued from any screen page after pressing the "Voice command" or "Telephone" button on the steering wheel, as long as there is no telephone call in progress.

"Voice command" Help message

Navigate home

Navigate to work

Navigate to preferred address <...>

Navigate to contact <…>

Navigate to address <...>

Show nearby POI <...>

Remaining distance

Remaining time

Arrival time

Stop route guidance

To start guidance or add a stopover, say "navigate to" and then the address or contact name.

For example, "navigate to address 11 Regent Street, London", or "navigate to contact, John

Miller".

You can specify if it's a preferred or recent destination.

For example, "navigate to preferred address, Tennis club", "navigate to recent destination,

11 Regent Street, London". Otherwise, just say, "navigate home".

To see points of interest on a map, you can say things like "show hotels in Banbury" or

"show nearby petrol station".

For more information you can ask for "help with route guidance".

To get information about your current route, you can say "tell me the remaining time",

"distance" or "arrival time".

Try saying "help with navigation" to learn more commands.

Depending on the country, give the destination instructions (address) in the language used by the system.


"Radio Media" voice commands

These commands can be issued from any screen page after pressing the "Voice command" or "Telephone" button on the steering wheel, as long as there is no telephone call in progress.


Tune to channel <...>

You can pick a radio station by saying "tune to" and the station name or frequency.

For example "tune to channel Talksport" or "tune to 98.5 FM". To listen to a preset radio station, say "tune to preset number". For example "tune to preset number five".

What's playing

To display the details of the current "track", "artist" and "album", you can say "What's playing"

Play song <...>

Play artist <…>

Use the command "play" to select the type of music you'd like to hear.

You can pick by "song", "artist", or "album".

Just say something like "play artist, Madonna", "play song, Hey Jude", or "play album,

Thriller".

Play album <...>

Media voice commands are available only for a USB connection.

.

11

12


"Telephone" voice commands

If a telephone is connected to the system, these voice commands can be issued from any main screen page after pressing the "Telephone" button on the steering wheel, as long as there is no telephone call in progress.

If there is no telephone connected by Bluetooth, a voice message announces: "Please first connect a telephone" and the voice session will be closed.


Call contact <...> *

Dial <...> *

Display contacts *

Display calls *

To make a phone call, say "call" followed by the contact name, for example: "Call David

Miller".

You can also include the phone type, for example: "Call David Miller at home". To make a call by number, say "dial" followed by the phone number, for example,

"Dial 107776 835 417".

You can check your voicemail by saying "call voicemail".

To send a text, say "send quick message to", followed by the contact, and then the name of the quick message you'd like to send.

For example, "send quick message to David Miller, I'll be late". To display the list of calls, say "display calls".

For more information on SMS, you can say "help with texting".

Call (message box | voicemail) *

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and if the download has been done.


"Test message" voice commands

If a telephone is connected to the system these voice commands can be issued from any main screen page after pressing the "Telephone" button on the steering wheel, as long as there is no telephone call in progress.

If no telephone has been connected by Bluetooth, a voice message announces: "Please first connect a telephone" and the voice session will be closed.


Send text to <...>

To hear your messages, you can say "listen to most recent message".

When you want to send a text, there's a set of quick messages ready for you to use. Just use the quick message name and say something like "send quick message to Bill Carter,

I'll be late".

Check the phone menu for the names of the supported messages.

Please say "call" or "send quick message to", and then select a line from the list.

To move around a list shown on the display, you can say "go to start", "go to end", "next page" or "previous page". To undo your selection, say "undo".

To cancel the current action and start again, say "cancel".

Listen to most recent message *

The system only sends pre-recorded "Quick messages".

* This function is only available if the telephone connected to the system supports downloading of contacts and recent calls and if the download has been done.

.

13

14


Navigation


Level 1

23 °C 18,5 21,5 12:13

1

23 °C 18,5 21,5 12:13

23 °C 18,5

Level 2

21,5 12:13

Level 3

Level 1

Navigation

Navigation

Level 2

Navigation

World map

Around the vehicle

Around home

Around the destination

2D mode

Level 3


Comments

Select the orientation of the map; north up, vehicle direction up or perspective.

Display the traffic information available.

Manually locate an area on the world map or enter the latitude and longitude coordinates.

Display the location criteria selected.

Switch to a 2D map.

Zoom out / zoom in using the touch buttons or with two fingers on the screen.

Start navigation to the current address.

Save the current address.


.

15

16


Level 1 Level 2 Level 3

23 °C 18,5 21,5 12:13

1

23 °C 18,5 21,5 12:13

2 3 4 5 6

7

Level 1

Navigation

Level 2

Stations

Car park

Danger area

Map color

POI on map

View map

Level 3

5

6

2

3

4

Travel

Active life

Commercial

Public

Geographic

Select all

7

Modify city

Weather

Petrol Station

Car park

Traffic

Danger area

Select POI


Comments

Activate or deactivate the content available

(stations, car parks, risk areas and danger areas).

Select day or night mode for display of the map.

Select the POIs available.

Select or deselect all.

Save your choice or selection.

Select or modify a city.

Display on the map the content available in nonconnected mode.

Select from the POIs available.


.

17

18



Level 3

Zoom in

Around the vehicle

On the route

At the destination

Weather

Level 4

Filling stations

Car park

Level 5


Comments

Zoom in around the city selected.

Select a location option.

Weather information transmitted in TMC mode.

Filling stations around the vehicle

Filling stations on the route

Filling stations at the destination

Car parks around the vehicle

Car parks on the route

Car parks at the destination

Display the list of POIs.


.

19

20



Level 3

Traffic

Danger area

Select POI

Level 4 Level 5

Traffic observed

List of danger areas


Comments

Traffic information sent in real time.

Display the list of danger areas (roadworks, breakdowns, accidents, ...).

Configure a category of POI to display.

.

21

22


Level 2

1

Level 3 Level 4

8 9 10

11 12 13 14 15

16

17

18

1

1

1

1

Level 2

Navigation

MENU

Enter address

Level 3

Navigation

MENU

My destinations

8

9

Recent

Preferred

10

Contact

Navigation

MENU

Points of interest

Navigation

MENU

Search

11

12

13

14

15

16

17

Travel

Active life

Commercial

Public

Geographic

Search

Point of interest

Address

18

Local / Connected

My home

My work

Level 4


Select the country.

Comments

Save the current address.

Confirm the current address.

Display the lists of destinations and start navigation.

Delete one or more destinations.

List of categories available.

After selection of category, select the point of interest.

Search for a point of interest.

Enter a point of interest.

Enter the address of a point of interest.

Enter settings for the POI search mode in a local or connected database depending on the services subscribed to.

Confirm the entry.

.

23

24


Level 2

1

Level 3 Level 4

19 20

21 22 23 24 25

1

Level 2

Navigation

MENU

Guidance criteria

Fast

Short

Level 3

Compromise

Ecological

See on map

1

Navigation

MENU

Routes / waypoints

19

20

Waypoints

Route

Add waypoint

Preview

Finish

1

Navigation

MENU

Settings

21

22

23

24

25

Aspects

Options

Alerts

Vocal

Mapping

Level 4

Add a waypoint


Comments

Select the guidance criteria (motorways, tolls and how traffic is taken into account).

Display the route selected using the criteria.

Save your selections.

Display the waypoints saved.

Display details of the route.

Add a waypoint from a list offered.

Display the map.

Press to calculate the route.

Delete one or more waypoints.

Move a waypoint in the list.

Enter choices and select the volume for the voice and stating the names of streets.

Save the selections adopted.

.

25

26


Choosing a new destination

Towards a new destination

Press

Navigation to display the primary page.

1

Press the "

MENU " button to go to the secondary page.

Select "

Enter address ".

Select the "

Country ".

Enter the " City ", the " Street " and the

" Number " and confirm by pressing on the suggestions displayed.

Press "

OK " to select the " Guidance

criteria ".

And / Or

Select " See on map " to select the

" Guidance criteria ".

Press "

OK " to start navigation.

To use the navigation system, it is necessary to enter the "

City ", the

"

Street " and the " Number " using the virtual keypad, or to take them from the list of "

Contacts " or from the " History " of addresses.

Towards a recent destination

Press Navigation to display the primary page.

1

Press the "


Select "

My destinations ".

Without confirmation of the street number, you will be guided to one end of the street.

8

Select the " Recent " tab.

Select the address chosen in the list to display the "

Guidance criteria ".

Press "

OK " to start navigation.

Select " Position " to see the point of arrival geographically.


Towards "My home" or "My work"


1

Press the " MENU " button to go to the secondary page.

Select "

My destinations ".

Towards a contact


1


Select " My destinations ".

9

Select the "

Preferred " tab.

Select " My home ".

10

Select the " Contact " tab.

Select a contact in the list offered to start navigation.

Towards points of interest (POI)

Points of Interest (POI) are listed in different categories.

1



Select " Points of interest ".

Select the "

Travel ", or " Leisure " or "

Commercial " or " Public " or

"

Geographic " tab.

Or

Select "

My work ". Or

Or

Select a previously saved favourite destination.

Select "

Search " to enter the name and address of a POI.

Press "

OK " to start calculation of the route.

.

27

28


Towards a point on the map


Towards GPS coordinates


Explore the map by sliding a finger on the screen.

Select the destination by pressing on the map.

Tap the screen to place a marker and display the sub-menu.

Explore the map by sliding a finger on the screen.

Press this button to display the world map.

Using the grid, select by zoom the desired country or region.

Press this button to start navigation.

Press this button to enter the GPS coordinates.

Or

Or

Or

Press this button to save the address displayed And

A long press on a point opens a list of

POIs nearby.

A marker is displayed in the middle of the screen, with the " Latitude " and

" Longitude " coordinates.

Press this button to start navigation.

Press this button to save the address displayed.

Press this button to enter the value for " Latitude " using the virtual keypad.

Press this button to enter the value for " Longitude " using the virtual keypad.

TMC (Traffic Message Channel) messages are linked to a European standard on the broadcasting of traffic information via the RDS system on FM radio, transmitting traffic information in real time.

The TMC information is then displayed on a GPS Navigation system map and taken into account straight away during navigation, so as to avoid accidents, traffic jams and closed roads.

The display of danger areas depends on the legislation in force and subscription to the service.


.

29

30


Connected navigation


Depending on the equipment level of the vehicle

Network connection provided by the vehicle

OR

Network connection provided by the user

23 °C 18,5 21,5 12:13


Connected navigation connection

As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited.

All operations must be done with the

vehicle stationary .

Network connection provided by the user

USB connection

Connect the USB cable.

The smartphone is in charge mode when connected by USB cable.

For access to connected navigation, you can use the connection provided by the vehicle via the "Emergency or assistance call" services or use your smartphone as a modem.

Activate and enter settings for sharing the smartphone connection.

Bluetooth connection

Activate the Bluetooth function on the telephone and ensure that it is visible to all (see the "Connect-App" section).

Wi-Fi connection

Select a Wi-Fi connection found by the system and connect to it (see the

"Connect-App" section).

Network connection provided by the vehicle

The system is automatically connected to the modem included for the "Emergency or assistance calls" services and does not require a connection provided by the user via their smartphone.

Restrictions of use:

- With CarPlay

®

, connection sharing is only with a Wi-Fi connection.

- With MirrorLink

TM

, connection sharing is only with a USB connection.

The quality of services depends on the quality of the network connection.

On the arrival of "TOMTOM

TRAFFIC", the services are available.

The services offered with connected navigation are as follows.

A Connected Services pack:

- Weather,

- Filling stations,

- Car park,

- Traffic,

- POI, local search.

A Danger area pack (option).

The principles and standards are constantly changing. For communication between your smartphone and the system to operate correctly, we recommend that you

keep your smartphone's operating system up to date, and the time and date on your smartphone and the

system correct.

.

31

32


Level 1

23 °C 18,5

Level 2

21,5 12:13

Level 3

23 °C 18,5 21,5 12:13

1

23 °C 18,5 21,5 12:13

23 °C 18,5 21,5 12:13

23 °C 18,5 21,5 12:13

26 27 28 29 30

7

Level 1

Navigation

Navigation

TOMTOM TRAFFIC

Navigation

Level 2

Weather

Stations

Car park

Traffic

Danger area

Map color

POI on map

View map

26

27

28

29

30

Commercial

Geographic

Leisure

Public

Travel

7

Modify city

Level 3


Comments

Select the orientation of the map; north up, vehicle direction up or perspective.

On connection of the system to a network,

"TOMTOM TRAFFIC" is displayed instead of

"TMC", for use of all of the options available, in real time.

Select the options.

The map display the route chosen, depending on options.

Select the display mode for the map.

Select the POIs available.

Save the options.

Select or change a city.


.

33

34



31 32

Level 3

Select city

Around the vehicle

On the route

At the destination

Weather

Level 4

Filling stations

Car park

Level 5


Comments



Weather information

Display the weather forecast for the day or the following days.

31

32

Filling stations around the vehicle

Filling stations on the route

Filling stations at the destination

By distance

By price

Car parks around the vehicle

Car parks on the route

Car parks at the destination

Sort by distance

Sort by spaces

Sort by price

Display the list of filling stations and the associated information (address, prices, fuels, ...).

Display the list of car parks and the associated information (address, distance, spaces available, price, ...).


.

35

36



Level 3

Traffic

Danger areas

Points of interest

Level 4

Points of interest

Level 5

Traffic observed

List of danger areas

Select POI


Comments

Display traffic information in real time: type, description and duration (in minutes).

Display danger areas (roadworks, breakdowns, accidents, ...) in real time.

Display the list of POIs for the location selected.

.

37


38

Display the weather

Press


Press this button to display the list of services.

Select " View map ".

Select " Weather ".

Press this button to display the first level of information.

Press this button to display the detailed weather information.

The temperature displayed at 6 o'clock in the morning will be the maximum temperature for the day.

The temperature displayed at 6 o'clock in the evening will be the minimum temperature for the night.

1

Press


Press the "


Select "

Settings ".

22

Select "

Options ".

Activate or deactivate:

- "

Allow declaration of danger

areas "

- "

Guidance to final destination

on foot "

- "

Authorise sending

information "

Select "

Alerts ".

23

Activate or deactivate "

Warn of

danger zones ".

For access to connected navigation, you have to select the option:

" Authorise sending information ".

The display of danger zones is conditioned by the legislation in force and subscription to the service.

To distribute information on the declaration of danger zones, you should check the option: "

Allow

declaration of danger areas ".


Press the "

Declare a new danger

area " button located in the upper bar of the touch screen.

Select the option "

Type " to choose the type of "Danger area".

Select the "

Speed " option and enter it using the virtual keypad.

Press "

OK " to save and distribute the information.

Press

Settings to display the primary page.

1

Press the "

OPTIONS " button to go to the secondary page.

Select "

System settings ".

Select the " System info " tab.

Select "

View " to view the version of the various modules installed in the system.

Select "

Update(s) due ".

You can download the system and map updates from the Brand's website.

The update procedure can also be found on the website.


.

39

40


Applications

According to version / according to equipment

Level 1 Level 2

23 °C 18,5 21,5 12:13

1 2 3

23 °C 18,5 21,5 12:13

Level 3


Internet Browser

Press Applications to display the primary page.

2

Press " Connectivity " to go to the

" Internet Browser " function.

Press " Internet Browser " to display the browser home page.

Connectivity


2

Press "

Connectivity " to go to the

CarPlay

®

or

MirrorLink

TM

function.

Select your country of residence.

Applications


3

Press "

Applications " to display the applications home page.

Press " OK " to save and start the browser.

Connection to the internet is via one of the network connections provided by the vehicle or the user.

.

41


42

23 °C 18,5 21,5 12:13

2


As a safety measure and because it requires the sustained attention of the driver, using a smartphone when driving is prohibited.

Operation must be with the

vehicle

Connect a USB cable. The smartphone charges when connecte d by a USB cable.

Press " Telephone " to display the

CarPlay

®

interface.

The synchronisation of a smartphone allows applications on a smartphone that are adapted to the CarPlay

®

technology to be displayed in the vehicle's screen, having first activated the CarPlay

® function in the smartphone.

As the principles and standards are constantly changing,

it is recommended that you keep your smartphone's

operating system updated .

For the list of eligible smartphones, go to the Brand's internet website in your country.

Or

Connect a USB cable. The smartphone charges when connected by a USB cable.

In the system, press " Applications " to display the primary page.

2

Press "

Connectivity " to go to the

CarPlay

®

function.

Press "

CarPlay " to display the

CarPlay

®

interface

On connecting the USB cable, the

CarPlay

®

function deactivates the system's Bluetooth

®

mode.

.

43


MirrorLink

TM

smartphone connection

44

23 °C 18,5 21,5 12:13

2




vehicle

The synchronisation of a smartphone allows applications on a smartphone that are adapted to the

MirrorLink

TM

technology to be displayed in the vehicle's screen.

The principles and standards are constantly evolving. For the communication process between the smartphone and the system to work correctly, the smartphone must be unlocked;

update the operating system of your smartphone as well as the date and time in the

smartphone and the system.

For the list of eligible smartphones, connect to the Brand's internet website in your country.

As a safety measure, applications can only be viewed with the vehicle stationary; display is interrupted once the vehicle is moving.

2

The "

MirrorLink

TM

" function requires the use of a compatible smartphone and applications.

When connecting a smartphone to the system, it is recommended that

Bluetooth

Connect a USB cable. The smartphone charges when connected by a USB cable.

From the system, press on

"

Applications " to display the primary page.

Press " Connectivity " to go to the

MirrorLink

TM

function.

Press "

MirrorLink

TM

" to start the system's application.

During the procedure, several screen pages relating to certain functions are displayed.

Accept to start and end the connection.

Once connection is established, a page is displayed with the applications already downloaded to your smartphone and adapted to MirrorLink

TM

technology.

Access to the different audio sources remains accessible in the margin of the MirrorLink

TM display, using touch buttons in the upper bar.

Access to the menus for the system is possible at any time using the dedicated buttons

There may be a wait for the availability of applications, depending on the quality of your network.

Depending on the smartphone, it may be necessary to activate the "

MirrorLink

function.

TM

"

.

45

46



23 °C 18,5 21,5 12:13

Level 1 Level 2

Applications

MirrorLink

TM

Level 3


Comments

Go to or return to the applications already downloaded to your smartphone and adapted to

MirrorLink

TM

technology.

Go to a menu list depending on the application chosen.

"Back": abandon the current operation, go up one level.

"Home": go to or return to the "Car mode" page on your smartphone.

Go to the primary page of the "Applications" menu.

.

47

48


According to equipment

Level 2

3

23 °C 18,5 21,5 12:13

1 2 3

Level 3

4 5 6

Level 2

Applications

Trip computer

4

5

6

Instant

Trip 1

Trip 2

Level 3


Comments

System providing information about the current journey (range, fuel consumption…).

Back to the Applications page.

.

49

50


Level 1

23 °C 18,5 21,5 12:13

1 2 3

Level 2 Level 3

7 8

9 10 11

12 13

1

Level 2

Applications

OPTIONS


7

All

8

Connected

Search

1

1

Applications

OPTIONS

Wi-Fi network connection

1

Applications

OPTIONS

Manage connection

Applications

OPTIONS

Share Wi-Fi connection

9

Secured

10

Not secured

11

Stored

12

Activation

13

Settings

Level 3


Comments

Display all telephones detected and saved.

Display all telephones connected.

Start the search for a device to be connected.

Display the secured Wi-Fi networks.

Display the not secured Wi-Fi networks.

Display the stored Wi-Fi networks.

Display the status of the subscription to the connected services, the status of the network connection and the connection mode.

Activate or deactivate the Wi-Fi connection sharing.

Select a Wi-Fi network found by the system and connect.

Save the settings.

.

51


52

Bluetooth

®

connection




Activate the Bluetooth function on the telephone and ensure that it is "visible to all" (telephone configuration).

Procedure from the telephone

Select the name of the system in the list of devices detected.

In the system, accept the connection request from the telephone.

To complete the pairing, whichever procedure used (from the telephone or from the system), ensure that the code is the same in the system and in the telephone.

Procedure from the system

Press on "

Connect-App " to display the primary page.

1

Press the " OPTIONS " button to go to the secondary page.

Press on " Bluetooth connection ".

Select "

Search ".

The list of detected telephones is displayed.

Connection sharing

The system offers to connect the telephone with 3 profiles:

- "

Telephone " (hands-free kit, telephone only),

- "

Streaming " (wireless play of audio files on the telephone),

- "

Mobile internet data ".

The " Mobile internet data " profile must be activated for connected navigation (where the vehicle does not have "Emergency and assistance call" services), having first activated sharing of this connection on your smartphone.

If the pairing procedure fails, it is recommended that you deactivate and then reactivate the

"Bluetooth" function in your telephone.

Select one or more profiles.

Select the name of the chosen telephone in the list.

Press " OK " to confirm.

Depending on the type of telephone, you may be asked to accept or not the transfer of your contacts and messages.


Wi-Fi connection

Network connection by the smartphone Wi-Fi.

Press " Connect-App " to display the primary page.

1


Select " Wi-Fi network connection ".

Select the "

Secured ", " Not secured " or "

Stored " tab.

Select a network.

Using the virtual keypad, enter the

"

Key " for the Wi-Fi network and the

"

Password ".

Press " OK " to start the connection.

The Wi-Fi connection and the sharing of the Wi-Fi connection are exclusive.

Sharing the Wi-Fi connection Managing connections

Creation of a local Wi-Fi network by the system.

Press Connect-App to display the primary page.

1

Press Connect-App to display the primary page.


1


Select " Manage connection ".

Select " Share Wi-Fi connection ".

12

And / Or

13

Select the "

Activation " tab to activate or deactivate sharing of the

Wi-Fi connection.

Select the " Settings " to change the name of the system network and the password.


With this function you can view the access to connected services, the availability of connected services and modify the connection mode.

To protect from any piracy and provide maximum security for your systems, it is recommended that you use a security code or a complex password.

.

53

54


Radio Media


Level 1 Level 2

23 °C 18,5

FM/87.5 MHz

87.5MHz

21,5 12:13

1 2 3 4

23 °C 18,5

FM/87.5 MHz

87.5MHz

21,5 12:13

23 °C 18,5

AM/531 kHz

PO kHz

21,5 12:13

1 2 3 4

Level 1

Radio Media

Source

2

Radio Media

Frequency / Presets

3

Radio Media

Band

4

Radio Media

List

FM

DAB

AM

Radio

USB iPod

CD

AUX

Bluetooth

Frequency

Presets

Radio stations

Level 2


Comments

Select change of source.

Carry out an automatic or manual search for radio stations.

Make a long press on an empty location to preset a station.

Press the Band button to change waveband.

Open the list and press a radio station to select it.

.

55

56


Level 2

1

Level 3

5 6 7 8 9

10 11

12 13 14 15

5 6 7 8 9

5 6 7 8 9

Level 2

1

Radio Media

OPTIONS

Audio settings

5

6

7

Ambience

Distribution

Sound

8

9

Voice

Ringtone

1

1

Radio Media

OPTIONS

Radio settings

10

11

General

Announcements

Radio Media

OPTIONS

Radio stations

12

13

14

15

FM

DAB

AM

Presets

Frequency

Level 3


Comments

Select the sound ambience.

Sound distribution by the Arkamys

®

system.

Adjust the volume or activate volume linked to speed.

Adjust the voice volume.

Adjust the ringtone volume.

Save settings.

Activate or deactivate settings.

Save settings.

Display the list of radio stations for the band selected.

Select a preset radio station.

Enter a frequency manually.

Change the screen display mode.

Update the list according to reception.

.

57

58


Level 2

1

Level 3

16 17 18 19 20

21

1

1

Level 2

Radio Media

OPTIONS

Music files

16

17

Albums

Artists

18

19

Genres

Playlists

20

Folders

Radio Media

OPTIONS

Managing photos

21

USB

Level 3


Comments

Choose a selection mode.

Display photos.

The system supports the following image formats:

.gif, .jpg, .jpeg, .bmp, .png, .raw and .tiff with a maximum file size of 10 Mb per image.

.

59


Radio

Selecting a station

Press

Radio Media to display the menu.

Press "

Frequency ".

2

Press one of the buttons for an automatic search for radio stations.

Or

Move the cursor for a manual search for frequencies up or down.

Or

1

Press

Radio Media to display the primary page.


Select "

Radio stations " in the secondary page.

2

Press "

Frequency ".

Enter the values using the virtual keypad.

First enter the units then click on the decimals zone to enter the figures after the decimal point.

Press "

OK " to confirm.

Preset a station

Select a radio station or frequency.

(refer to the corresponding section)

Press "

Presets ".

2

Make a long press on one of the buttons to preset the station.

Radio reception may be affected by the use of electrical equipment not approved by the Brand, such as a USB charger connected to the 12 V socket.

The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode.

This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.

.

61


62

Activate/ Deactivate RDS

Press


1


Select " Radio settings ".

10

Select "

General ".

Activate/deactivate "

Station follow ".

Display text information

1

The "Radio Text" function allows information transmitted by the radio station, relating to the station or the song playing, to be displayed.

Press


Press the "


Select "

Radio settings ".

Play TA messages

The TA (Traffic Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station that carries this type of message. While traffic information is being broadcast, the current media is automatically interrupted so that the TA message can be heard. Normal play of the media previously playing is resumed at the end of the message.


RDS, if activated, allows you to continue listening to the same station by automatic retuning to alternative frequencies.

However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.

10

Select "

General ".

Activate / Deactivate "

Display radio

text ".

Press "

OK " to confirm.

11

Select "

Announcements ".


Traffic

announcement ".

Press "

OK " to confirm.


DAB radio (Digital Audio Broadcasting)

Terrestrial Digital Radio DAB-FM auto tracking

Digital radio provides higher quality reception.

The different multiplexes offer a choice of radio stations arranged in alphabetical order.

"DAB" does not cover 100% of the territory.

When the digital radio signal is poor,

"DAB-FM auto tracking" allows you to continue listening to the same station, by automatically switching to the corresponding "FM" analogue station

(if there is one).

3

Press


Select the audio source.

Press " Band " to select the " DAB " waveband.

Press


1


Select " Radio settings ".

10

Select "

General ".


Station

follow ".

Press "

OK ".

If "DAB-FM auto tracking" is activated, there is a difference of a few seconds when the system switches to "FM" analogue radio with sometimes a variation in volume.

Once the digital signal is restored, the system automatically changes back to

"DAB".

If the "DAB" station being listened to is not available on "FM" (" DAB-FM " option greyed out), or "DAB/FM auto tracking" is not activated, the sound will cut out while the digital signal is too weak.

.

63


64

Media

USB port Auxiliary (AUX) socket

(depending on equipment)

Selecting the source

Press


Select "

Source ".

Insert the USB memory stick into the USB port or connect the USB device to the USB port using a suitable cable (not supplied).

To protect the system, do not use a

USB hub.

The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection.

Reduce the number of non-music files and the number of folders to reduce the waiting time.

The playlists are updated every time the ignition is switched off or connection of a USB memory stick. The lists are memorised: if they are not modified, the subsequent loading time will be shorter.

Choose the source.

This source is only available if "Auxiliary input" has been checked in the audio settings.

Connect the portable device (MP3 player…) to the auxiliary Jack socket using an audio cable

(not supplied).

First adjust the volume of your portable device

(to a high level). Then adjust the volume of your audio system.

Display and management of the controls are via the portable device.

CD player

(depending on equipment)

Insert the CD in the player.

Streaming allows you to listen to music from your telephone.

The Bluetooth profile must be activated. First adjust the volume on your portable device (to a high level).

Then adjust the volume of your audio system.

If play does not start automatically, it may be necessary to start the audio playback from the telephone.

Control is from the portable device or by using the system's touch buttons.

Once connected in streaming mode, the telephone is considered to be a media source.


Connect the Apple

®

player to the USB port using a suitable cable (not supplied).

Play starts automatically.

Control is via the audio system.

The classifications available are those of the portable device connected

(artists / albums / genres / playlists / audiobooks / podcasts).

The default classification used is by artist. To modify the classification used, return to the first level of the menu then select the desired classification

(playlists for example) and confirm to go down through the menu to the desired track.

Information and advice

The system supports USB mass storage devices, BlackBerry or Apple

®

®

players via USB ports. The adaptor cable is not supplied.

devices

players via USB ports. The

Control of the peripheral device is with the audio system controls.

Other peripherals, not recognised on connection, must be connected to the auxiliary socket using a Jack cable (not supplied) or via Bluetooth streaming, depending on compatibility.

The version of software in the audio system may not be compatible with the generation of your Apple

®

player.

It is advisable to restrict file names to

20 characters, without using of special characters (e.g.: " " ? ; ù) to avoid any playing and displaying problems.

Use only USB memory sticks formatted FAT 32

(file allocation table).

It is recommended that the original USB cable for the portable device is used.


USB hub.

The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg and .mp3" file extensions and with a bit rate of between

32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of file (.mp4, ...) can be played.

".wma" files must be of the standard wma 9 type.

The sampling rates supported are 32, 44 and

48 KHz.

In order to be able to play a burned CDR or

CDRW, when burning it is preferable to select standards ISO 9660 level 1, 2 or Joliet.

If the disc is burned in another format, it may not be played correctly.

It is recommended that the same burning standard is always used on an individual disc, with as low a speed as possible (4x maximum) for the best sound quality.

In the particular case of a multi-session CD, the

Joliet standard is recommended.

.

65


Telephone


Level 1

23 °C 18,5 21,5 12:13

1

Level 2

4 5 6 7

66

23 °C 18,5 21,5 12:13

1 2 3 8 9 10 11

Level 3

12 13 14

Level 1

4

5

6

7

Level 2

All

Telephone

Address

Favourites

2

Telephone

Bluetooth

Contact

Search

Create

3

Telephone

Bluetooth

Calls

10

11

8

9

All

Incoming

Outgoing

Missed

12

13

14

Telephone

Address

Email

Level 3


Comments

View contacts according to presentation choices.

Select a contact or a favourite saved in the system via the profile selected to start the call.

Sort the contacts by Surname-First name or First name-Surname.

Update the contacts from the telephone.

Search for a contact in the directory.

Create a new contact in the system.

View calls according to choice of presentation.

Select a contact to start the call.

View details for the contact.

.

67

68


Level 2

1

Level 3

15 16

17 18 19

20 21 22

1

Level 2

Telephone

OPTIONS


1

1

Telephone

OPTIONS

Messages

Telephone

OPTIONS

Email

15

All

16

Connected

Search

17

All

18

Received

19

Sent

20

Received

21

Sent

22

Not read

Mailbox

Level 3


Comments

Display all telephones detected and saved.

Display all connected telephones.

Start the search for a device to connect.

Display messages according to the choice made.

Display emails according to the choice made.

.

69

70


Level 2

1

Level 3

23 24 25 26

27 28 29 30

23 24 25 26

1

Level 2

Telephone

OPTIONS

Settings

23

Security

24

Voicemail

25

Ringtone

26

Statistics

1

Telephone

OPTIONS

Quick messages

27

Delayed

28

My arrival

29

Not available

30

Other

Level 3


Make driving safe.

Comments

Enter and save the number for the telephone voicemail.


Display data for the telephone connected.

Save the options.

Select a quick message from the categories, as required.

.

71


72

As a safety measure and because it requires sustained attention by the driver, the pairing of a Bluetooth mobile telephone with theBluetooth hands-free system of your audio system must be done with the

vehicle stationary and the ignition on.


Press on

Telephone to display the primary page.

Press on " Bluetooth search ".



Select the system name in the list of devices detected.



Or

Select " Search ".

The list of telephones detected is displayed.


"Bluetooth" function in your telephone.


Connection sharing


-

Telephone (hands-free kit, telephone only),

-

Streaming (wireless play of audio files on the telephone),

-

Mobile internet data .

The " Mobile internet data " profile must be activated for connected navigation, having first activated sharing of the connection on your smartphone.





Automatic reconnection

On return to the vehicle, if the last telephone connected is present again, it is automatically recognised and within about 30 seconds of switching on the ignition, the connection is established without any action on your part (Bluetooth activated).

To modify the connection profile :

Press


1


Select " Bluetooth connection " to display the list of paired devices.

Press the "details" button.



The ability of the system to connect with just one profile depends on the telephone.

All three profiles may connect by default.

The services available depend on the network, the SIM card and the compatibility of the Bluetooth devices used. Check in your telephone's manual and with your service provider for the services available to you.

The profiles compatible with the system are HFP, OPP, PBAP, A2DP, AVRCP,

MAP and PAN.

Go to the Brand's website for more information

(compatibility, additional help, ...).

.

73

74


Managing paired telephones

This function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing.

Press


1


Select "

Bluetooth connection " to display the list of paired peripheral devices.

Press on the name of the telephone chosen in the list to disconnect it.

Press again to connect it.

Deleting a telephone

Select the basket at top right of the screen to display a basket alongside the telephone chosen.

Press the basket alongside the telephone chosen to delete it.

Receiving a call

An incoming call is announced by a ring and a superimposed display in the screen.

Make a short press on the steering mounted TEL button to accept an incoming call.

And

Make a long press

Or

on the steering mounted TEL button to reject the call.

Select "

End call ".


Making a call

Using the telephone is not recommended while driving.

Park the vehicle.

Make the call using the steering mounted controls.

Calling a new number

Press


Enter the phone number using the digital keypad.

Press " Call " to start the call.

Calling a contact

Press


Or make a long press

Calling a recently used number

Press Telephone to display the primary page.

Or

Make a long press

on the steering mounted TEL button.

on the steering mounted button.

Select "

Contact ".

2

Select the desired contact from the list offered.

Select " Call ".

3

Select " Calls ".


It is always possible to make a call directly from the telephone; as a safety measure, first park the vehicle.

.

75

76


Managing contacts / entries


Select " Contact ".

2

Select " Create " to add a new contact.

Managing messages


1


12

In the " Telephone " tab, enter the telephone numbers for the contact.

13

14

In the " Address " tab, enter the addresses for the contact.

In the " Email " tab, enter the email addresses for the contact.

The "

Email " function allows email addresses to be entered for a contact, but the system is not able to send emails.

Select "

Messages " to display the list of messages.

Select the " All " or " Received " or

" Sent " tab.

Select the detail of the message chosen in one of the lists

Press " Answer " to send a quick message stored in the system.


Press " Play " to hear the message.

The access to "

Messages " depends on the compatibility of the smartphone and the integral system.

Depending on the smartphone, access to your messages or email may be slow.

The services available depend on the network, the SIM card and the compatibility of the Bluetooth devices used.

Check in the manual for your smartphone and with your service provider for the services available to you.

Managing quick messages


1

Press on the " OPTIONS " button to go to the secondary page.

Select "

Quick messages " to display the list of messages.

Managing email


1


Select "

Email " to display the list of messages.

Select the "

Delayed " or " My arrival " or "

Not available " or " Other " tab with the possibility of creating new messages.

Press " Create " to write a new message.

Select the message chosen in one of the lists.

Press " Transfer " to select the addressee(s).

Press " Play " to start playing the message.

Select the "

"

Received " or " Sent " or

Not read " tab.

Select the email chosen in the list.

Press " email.

Access to "

Play " to start playing the

Email " depends on the compatibility of the smartphone and the integral system.


.

77


Settings


Level 1 Level 2

78

23 °C 18,5 21,5 12:13

1 2

3 4 5 6 7

3 4 5 6 7

3 4 5 6 7

Level 1

Settings

Color schemes

Level 2

Color schemes: 1,2,3, ...

Settings

Audio settings

3

4

5

6

7

Ambience

Distribution

Sound

Voice

Ringtone

2

Settings

Turn off screen

Settings

Profile (1, 2, 3)


Comments

Having chosen the color scheme, save the setting.

Select the sound ambience.

Sound distribution by the Arkamys

©

system.

Adjust the volume or activate linked to speed.

Adjust the voice volume.


Save the settings.

Function allowing the display to be switched off.

Pressing the screen reactivates it.

Activate the profile selected.

.

79

80


Level 2

1

Level 3

8 9 10

11 12 13 14

15 16

Level 4

15 16

1

Level 2 Level 3

8

Units

Settings

OPTIONS

System settings

9

Factory settings

10

System info

1

Settings

OPTIONS

Languages

11

All

12

Europe

13

Asia

14

America

1

Settings

OPTIONS

Screen configuration

15

16

Animation

Brightness

Level 4

Distance and fuel consumption

Temperature

Reinitialize

View


Comments

Set the units used for distance, fuel consumption and temperature.

Restore the factory settings.

View the versions of the different modules

(system, mapping, risk areas) installed in the system as well as the updates available.

Save the settings.

Select the language then confirm.

Having selected the language, save the setting.

Activate or deactivate settings.

Move the cursor to adjust the brightness of the screen and/or of the instrument panel.

Save the settings.

.

81

82


Level 2

1

Level 3

17 18

19 20 21 22

Level 4

1

Level 2

17

Date

Level 3

Settings

OPTIONS

Setting the time-date

18

Time

1

Settings

OPTIONS

Setting of the profiles

19

20

21

22

Profile 1

Profile 2

Profile 3

Common profile

1

Settings

OPTIONS

Driver screen configuration

Personalisation of the dashboard

Date

Level 4

Date format:

Time

Time Zone

Time format:

Synchronisation with

GPS (UTC):


Comments

Enter the date and select the date format.

Set the time.

Define the time zone.

Select the time format: 12h / 24h.

Activate or deactivate synchronisation with the satellites.

Save the settings.

Enter settings for the profiles.

Save the settings.

Choose and select the display information required on the dashboard.

Confirm the selections.

.

83


84

Audio settings

Press Settings to display the primary page.

Select " Audio settings ".

Or

3

4

Or

Or

5

Or

6

7

Select " Ambience ".

"

Position ".

" Sound ".

" Voice ".

"

Ringtone ".

Press "

OK " to save the settings.

The sound distribution (or spatialisation with the Arkamys system) is audio processing that allows the quality of the sound to be adapted according to the number of passengers in the vehicle.

Available only with the front and rear speakers configuration.

The audio

Ambience settings

(6 ambiences available) as well as the

Bass , Medium and Treble settings are different and independent for each sound source.

Activate or Deactivate "

Loudness ".

The settings for " Position " (All passengers, Driver and Front only) are common to all sources.

Activate or Deactivate " Touch tones ",

" Volume linked to speed " and

" Auxiliary input ".

Profile settings

As a safety measure and because it requires the sustained attention of the driver, changes to settings must only be done with the

vehicle stationary .

1

Press the "


Select " Setting of the profiles ".

19

Press


Select "

Profile 1 ", " Profile 2 ",

"

Profile 3 " or " Common profile ".

Press this button to enter a name for the profile using the virtual keypad.

Press "

OK " to confirm.

On-board audio: Arkamys Sound

Staging optimises the distribution of sound in the passenger compartment.


Press this button to add a photograph to the profile.

Insert a USB memory stick containing the photograph in the USB port.

Select the photograph.

Press "

OK " to accept the transfer of the photograph.

Press " OK " again to save the settings.

The location for the photograph is square; the system deforms the original photograph if in another format.

Press this button to initialise the profile selected.

Initialisation of the profile selected activates the English language by default.

2

Select a " Profile " (1 or 2 or 3) to associate the " Audio settings " with it.

Select " Audio settings ".

Or

3

4

Or

Or

5

Or

6

7

Select " Ambience ".

"

Distribution ".

" Sound ".

" Voice ".

"

Ringtone ".

Press "

OK " to save the settings.

.

85

86


Modifying system settings


1


Select "

Screen configuration ".


Select the language


1


Select "

System settings ".

1


Select " Languages " to change the language.

15

Select " Animation ".

Activate or deactivate "

Automatic

scrolling ".

16

Select " Brightness ".


8

9

Select "

Units " to change the units for distance, fuel consumption and temperature.

Select "

Factory settings " to return to the initial settings.

Returning the system to factory settings activates the English language by default.

10

Select "

System info " to display the versions of the different modules installed in the system.

Setting the date


1

Press the "


Select "

Setting the time-date ".


17

Select "

Date ".

Press this button to define the date.


Select the display format of the date.

Adjustment of the time and date is only available if "GPS synchronisation" is deactivated.

The change between winter and summer time is done by changing the time zone.

Setting the time


1

Press the "


Select "

Setting the time-date ".

18

Select "

Time ".

Press this button to adjust the time using the virtual keypad.

Press "

OK " to confirm.


The system does not automatically manage the change between winter and summer time (depending on country).

Color schemes

As a safety measure, the procedure for changing the color scheme is only possible with the vehicle stationary.

Press


Select " Color schemes ".

Press this button to define the time zone.

Select a color scheme in the list then press " OK " to confirm.

Select the display format for the time

(12h / 24h).

Activate or deactivate synchronisation with the satellites

(UTC).

Every time the color scheme is changed, the system restarts, temporarily displaying a black screen.

.

87

88


Frequently asked questions

The following table groups together the answers to the most frequently asked questions concerning your audio system.

Navigation

QUESTION

The route calculation is not successful.

ANSWER

The route settings may conflict with the current location (exclusion of toll roads on a toll motorway).

SOLUTION

Check the route settings in the "Navigation" menu.

The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.

The audible warning of

"Danger areas" does not work.

The audible warning is not active.

The system does not suggest a detour around an incident on the route.

The guidance criteria do not take account of TMC messages.

Activate audible warnings (without the possibility of adjusting the volume) in the "Navigation" menu.

Select setting for the "Traffic info" function in the list of route settings (Without, Manual or

Automatic).

I receive a "Danger area" alert which is not on my route.

Other than guidance, the system announces all "Danger areas" positioned in a cone located in front of the vehicle. It may provide an alert for "Danger areas" located on nearby or parallel roads.

Zoom in on the map to view the exact position of the

"Danger area". Select "On the route" to no longer receive alerts other than navigation instructions or to reduce the time for the announcement.


QUESTION

Certain traffic jams along the route are not indicated in real time.

ANSWER

On starting, it is several minutes before the system begins to receive the traffic information.

SOLUTION

Wait until the traffic information is being received correctly (display of the traffic information icons on the map).

In certain countries, only major routes (motorways...) are listed for the traffic information.

This phenomenon is normal. The system is dependent on the traffic information available.

The altitude is not displayed.

On starting, the initialisation of the GPS may take up to 3 minutes to receive more than 4 satellites correctly.

Wait until the system has started up completely so that there is GPS coverage by at least 4 satellites.

Depending on the geographical environment (tunnel...) or the weather, the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system is dependent on the GPS signal reception conditions.

.

89

90


Radio

QUESTION

The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound,

87.5 Mhz is displayed...).

I cannot find some radio stations in the list of stations received.

ANSWER

The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.

The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.

SOLUTION

Activate the "RDS" function by means of the short-cut menu to enable the system to check whether there is a more powerful transmitter in the geographical area.

This phenomenon is normal and does not indicate a fault with the audio system.

The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).

Have the aerial checked by a franchised dealer.

The station is not received or its name has changed in the list. Press on the "Update list" button in the "Radio stations" secondary menu.

The name of the radio station changes.

Some radio stations send other information in place of their name

(the title of the song for example).

The system interprets this information as the name of the station.


Media

QUESTION

Playback of my USB memory stick starts only after a very long wait

(around 2 to 3 minutes).

The CD is ejected automatically or is not played by the player.

There is a long waiting period following the insertion of a CD or connection of a USB memory stick.

The CD player sound is poor.

ANSWER

Some files supplied with the memory stick may greatly slow down access to reading the memory stick (multiplication by 10 of the catalogue time).

SOLUTION

Delete the files supplied with the memory stick and limit the number of sub-folders in the file structure on the memory stick.

The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player does not recognise.

The CD has been recorded in a format that is not compatible with the player (udf, ...).

The CD is protected by an anti-pirating protection system which is not recognised by the audio system.

Check that the CD is inserted in the player the right way up.

Check the condition of the CD: the CD cannot be played if it is too badly damaged.

Check the content in the case of a recorded CD: refer to the advice in the "AUDIO" section.

The audio system's CD player does not play

DVDs.

Some recorded CDs will not be played by the audio system because they are not of adequate quality.

When a new medium is inserted, the system reads a certain amount of data (directory, title, artist, etc.). This may take from a few seconds to a few minutes.

This phenomenon is normal.

The CD used is scratched or of poor quality.

The audio equipment settings (bass, treble, ambiences) are unsuitable.

Insert good quality CDs and store them in suitable conditions.

Set the treble or bass level to 0, without selecting an ambience.

.

91

92


QUESTION

Some characters in the media information are not displayed correctly while playing.

Playing of streaming files does not start.

ANSWER

The audio system does not display some types of characters. Use standard characters to name tracks and folders.

SOLUTION

The peripheral device connected does not support automatic play. Start the playback from the device.

The names of tracks and the track length are not displayed on the screen when streaming audio.

Telephone

QUESTION

I cannot connect my

Bluetooth telephone.

The volume of the telephone connected in Bluetooth mode is inaudible.

The Bluetooth profile does not allow the transfer of this information.

The telephone's Bluetooth function may be switched off or the telephone may not be visible.

ANSWER

The Bluetooth telephone is not compatible with the system.

The volume depends both on the system and on the telephone.

SOLUTION

Check that your telephone's Bluetooth function is switched on.

Check in the telephone settings that it is "visible to all".

You can check the compatibility of your telephone at the Brand's website (services).

Increase the volume of the audio system, to maximum if required, and increase the volume of the telephone if necessary.

The ambient noise level has an influence on the quality of telephone communication.

Reduce the ambient noise level (close the windows, reduce the booster fan speed, slow down, ...).


QUESTION

Some contacts are duplicated in the list.

Contacts are not shown in alphabetical order.

ANSWER

The options for synchronizing contacts are synchronizing the contacts on the SIM card, the contacts on the telephone, or both.

When both synchronizations are selected, some contacts may be duplicated.

Some telephones offer display options. Depending on the settings chosen, contacts can be transferred in a specific order.

SOLUTION

Select "Display SIM card contacts" or "Display telephone contacts".

Modify the display setting in the telephone directory.

The system does not receive

SMS text messages.

The Bluetooth mode does not permit sending SMS text messages to the system.

Settings

QUESTION

In changing the setting of treble and bass the equalizer setting is deselected.

In changing the equalizer setting, treble and bass return to zero.

ANSWER

The selection of an equalizer setting imposes the settings for treble and bass and vice-versa.

SOLUTION

Modify the treble and bass or equalizer settings to obtain the desired musical ambience.

When changing the balance settings, the distribution setting is deselected.

When changing an distribution setting, the balance setting is deselected.

The selection of a distribution setting imposes the balance settings and vice-versa.

Modify the balance or distribution settings to obtain the desired musical ambience.

.

93

94


QUESTION

There is a difference in sound quality between the different audio sources.

ANSWER

For optimum sound quality, the audio settings can be adapted to the different sound sources, which may result in audible differences when changing source.

SOLUTION

Check that the audio settings are adapted to the sources listened to. Adjust Balance, Treble, Bass to the middle position, select the "None" musical ambience and set the loudness correction to the

"Active" position in CD mode or to the "Inactive" position in radio mode.

With the engine off, the system switches off after a few minutes of use.

When the engine is switched off, the system's operating time depends on the state of charge of the battery.

The switch-off is normal: the system switches to economy mode and switches off to prevent discharging of the vehicle's battery.

Start the vehicle's engine to increase the battery charge.

The date and time cannot be set.

Setting of the date and time is only available if the synchronisation with the satellites is deactivated.

Settings menu / Options / Time-Date setting.

Select the "Time" tab and deactivate the "GPS synchronisation" (UTC).


CITROËN Connect Radio

First steps

Steering mounted controls - Type 1

Contents

96

98

Steering mounted controls - Type 2 99

Menus 100

Applications 102

Radio Media 106

Telephone 118

Settings


132

143

The different functions and settings described vary according to the version and configuration of your vehicle.




The system is protected in such a way that it will only operate in your vehicle.

The display of the

Energy Economy

Mode message signals that a change to standby is imminent.

The link below gives access to OSS

(Open Source Software) codes for the system.

http://www.psa-peugeot-citroen.com/oss

.

95

Transversal-Citroen_en_Chap02_RCC-2-2-0_ed01-2016


First steps

With the engine running, a press mutes the sound.

With the ignition off, a press turns the system on.

Volume.

Use the buttons either side of or below the touch screen for access to the menus, then press the virtual buttons in the touch screen. All of the touch areas of the screen are white.

Press in the grey zone to go back a level or confirm.

Press the back arrow to go back a level or confirm.

The touch screen is of the "capacitive" type.

To clean the screen, use a soft, nonabrasive cloth (spectacles cloth) with no additional product.

Do not use sharp objects on the screen.

Do not touch the screen with wet hands.

96


Certain information is displayed permanently in the upper band of the touch screen:

- Reminder of the air conditioning information, and direct access to the corresponding menu.

- Reminder of the Radio Media and

Telephone menu information.

- Access to the Settings of the touch screen and digital instrument panel.

Select the audio source (depending on version):

- FM / DAB * / AM * stations.

- Telephone connected by Bluetooth * and using Bluetooth * audio streaming.

- CD player.

- USB memory stick.

- Media player connected to the auxiliary socket (Jack, cable not supplied).


In the "Settings" menu you can create a profile for just one person or a group of people with common points, with the possibility of entering a multitude of settings (radio presets, audio settings, ambiences, ...); these settings are taken into account automatically.

In very hot conditions, the volume may be limited to protect the system. It may go into standby (screen and sound off) for at least 5 minutes

The return to normal takes place when the temperature in the passenger compartment has dropped.

* Depending on equipment.


.

97



Radio :

Select the previous / next preset radio station.

Select the previous / next item in a menu or a list.

Media:

Select of the previous / next track


Radio :

Short press: display the list of radio stations.

Long press: update the list.

Media :

Short press: display the list of folders.

Long press: display the sorting options.

Change audio source (Radio; USB;

AUX (if a device is connected); CD;

Streaming)

Confirm a selection.

Increase volume.

Decrease volume.

Mute / Restore sound by simultaneously pressing the increase and decrease volume buttons.

98




Voice commands :

Short press, smartphone voice commands via the system.

Increase volume.

Decrease volume.

Mute/ Restore the sound.

Or

Mute by pressing the volume increase and decrease buttons simultaneously.

Restore the sound by pressing one of the two volume buttons.

Media (short press): change the multimedia source.

Telephone (short press): call.

Call in progress (short press): access to telephone menu.

Telephone (long press): reject an incoming call, end call, access to telephone menu.

Radio (rotate): previous / next preset.

Media (rotate): previous / next track, move in a list.

Short press : confirm a selection; other than selection, access to presets.

Radio : display the list of stations.

Media : display the list of tracks.

Radio (press and hold): update the list of stations received.


.

99


Menus

According to version.

Air conditioning Applications

18,5 21,5

Manage the different temperature and air flow settings.

Access configurable equipment.

Navigation

Radio Media

Select an audio source or radio station.

Configure the guidance and select your destination via MirrorLink

TM

or CarPlay

®

.

100


Driving


Telephone Settings

Connect a telephone by Bluetooth

®

.

Operate certain applications on a smartphone connected via MirrorLink

TM

or CarPlay .

Configure a personal profile and/or configure the sound (balance, ambience, ...) and the display (language, units, date, time, ...).

Activate, deactivate or configure certain vehicle functions.


.

101


Applications


Level 1 Level 2

1

102


4 5 6

Level 3

2 3

Level 1

Applications

Temperature conditioning

2

3

State

Level 2

Settings

Applications

Trip computer

4 Instant

5

Trip 1

6

Trip 2

Applications

Photos

1

Applications

OPTIONS

Level 3


Comments

Activate / deactivate the temperature conditioning.

Configure the pre-conditioning.

Save the parameters.

Confirm the settings.

System providing information about the current journey (range, consumption…).

Photo gallery


Photos

Search

Delete

Go back to the Applications page.

Go to the photo gallery.

Go back a level.


Delete one or more devices.


.

103


Viewing photos

Insert a USB memory stick in the USB port.


USB hub.

The system can read folders and image files in the formats: .tiff; .gif; .jpg/jpeg; .bmp; .png.


Press " Photos ".

Select a folder.

Select an image to view.

Press this button to display the details of the photo.

Press the back arrow to go back a level.


.

105


Radio Media


Level 1 Level 2

1 2 3 4 5

106


Level 1

1

Radio Media

SOURCES

2

3

4

Radio Media

Frequency

Radio Media

List

Radio Media

Preset

5

Radio Media

OPTIONS

Radio Media

87.5 MHz


Comments

Radio

Bluetooth

CD

AUX

USB iPod

FM / DAB / AM

Level 2

Preset

AM band / DAB band / FM band

Audio settings

News

TA

RDS

FM-DAB Follow-up

Select change of source.

Display the current radio station.

Update the list according to the stations received.

Make a short press to preset the station.

Select a preset station or preset a station.

Press the Band button to change waveband.

Configure the audio settings.

Activate or deactivate the options.

Enter a frequency of the FM and AM bands on the virtual keypad.

.

107



Level 1

1

Level 2

108


2 3 4 5

5

5

Level 3

Level 1

1

Radio Media

SOURCES

Radio

2

Level 2

Frequency

3

4

List

Preset

5

OPTIONS

1

1

Radio Media

SOURCES

Bluetooth

Radio Media

SOURCES

CD

5

OPTIONS

5 OPTIONS


Level 3 Comments

Display the current radio station.

Display the list of stations received.

Select a preset station or preset a station.

FM band / DAB band /

AM band

Audio settings

News

TA

RDS

FM-DAB Follow-up

Press the band button to change band.


Activate or deactivate the options.

Audio settings


Audio settings

Display the details of the music being played.



.

109


Level 1

1

Level 2

5

110


6 7 8 5

Level 3

1

Level 1

Radio Media

SOURCES

AUX

Level 2

5

OPTIONS

1

Radio Media

SOURCES

USB

6

Player

7

8

Tracks list

Library

5

OPTIONS

Level 3

Audio settings

Audio settings


Comments


Display the details of the music being played.

Display the current selection.

Display the music library.



.

111


Radio


Press

Radio Media to display the menu.

Or

Or

Press one of the buttons for an automatic search for radio stations.

Move the cursor for a manual search for frequencies up or down.

Press the frequency.

Enter the FM and AM waveband values using the virtual keypad.

Press "

OK " to confirm.

Radio reception may be affected by the use of electrical equipment not approved by the Brand, such as a USB charger connected to the 12V socket.

The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode.

This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.

Changing waveband

Press


5

Press the "


Press "

Band " to change waveband.

Preset a station


Make a short press on the star outline. If the star is solid, the radio station is already preset.

Or


Press "

Preset ".

4

Make a long press on one of the buttons to preset the station.

Press in the grey zone to confirm.

112



Activate/ Deactivate RDS

Press


5

Press the "


Activate/deactivate "

RDS ".


RDS, if activated, allows you to continue listening to the same station by automatic retuning to alternative frequencies.

However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.

Display text information

5

The "Radio Text" function allows information transmitted by the radio station and related to the station or the song playing to be displayed.

Press


Press the "


Play TA messages

The TA (Traffic Announcement) function gives priority to TAalert messages. To operate, this function needs good reception of a radio station that carries this type of message. While traffic information is being broadcast, the current media is automatically interrupted so that the TA message can be heard. Normal play of the media previously playing is resumed at the end of the message.


NEWS ".

Press



5

Press the "



TA


.

113



Audio settings

Press Radio Media to display the primary page.

5

Press the "


Press " Audio settings ".

Select the " Tone" or "Balance " or

" Sound" or " configure the audio settings.

Press the back arrow to confirm.

On the "

Tone " tab, the Ambience audio settings and

Bass , Medium and Treble are different and independent for each audio source.

On the " Balance " tab, the All

Driver and

Front only

settings are common to all sources.

On the "

Sound " tab, activate or deactivate "

Volume linked to speed ",

"

Auxiliary input " and " Touch tones ".

The sound distribution (or spatialisation with the Arkamys

©

system) is audio processing that allows the quality of the sound to be adapted according to the number of passengers in the vehicle.

On-board audio: Arkamys

©

Sound

Staging optimises the distribution of sound in the passenger compartment.

114



DAB radio (Digital Audio Broadcasting)

Terrestrial Digital Radio FM-DAB Follow-up

Digital radio provides higher quality reception.

The different multiplexes offer a choice of radio stations arranged in alphabetical order.

"DAB" does not cover 100% of the territory.

When the digital radio signal is poor, the "FM-DAB Follow-up" allows you to continue listening to the same station, by automatically switching to the corresponding "FM" analogue station

(if there is one).

5


Press the "


Press "

Band " to select " DAB band ".


5


Press the "



FM-DAB

Follow-up ".


If the "FM-DAB Follow-up" is activated, there is a difference of a few seconds when the system switches to "FM" analogue radio with sometimes a variation in volume.

Once the digital signal is restored, the system automatically changes back to

"DAB".

If the "DAB" station being listened to is not available on "FM", or if the

"FM-DAB Follow-up" is not activated, the sound will cut out while the digital signal is too weak.


.

115


Media

USB port Auxiliary socket (AUX) Selecting the source

Press


Press the "

SOURCES " button.

1

Choose the source.

Insert the USB memory stick in the USB port or connect the USB device to the USB port using a suitable cable (not supplied).


USB hub.

The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection.

Reduce the number of non-music files and the number of folders to reduce the waiting time.

The playlists are updated every time the ignition is switched off or connection of a USB memory stick. The lists are memorised: if they are not modified, the subsequent loading time will be shorter.

This source is only available if "Auxiliary input" has been checked in the audio settings.

Connect the portable device (MP3 player…) to the auxiliary Jack socket using an audio cable

(not supplied).

First adjust the volume of your portable device

(to a high level). Then adjust the volume of your audio system.

Display and management of the controls are via the portable device.

Streaming allows you to listen to music from your telephone.

The Bluetooth profile must be activated. First adjust the volume on your portable device (to a high level).

Then adjust the volume of your system.

If play does not start automatically, it may be necessary to start the audio playback from the smartphone.

Control is from the portable device or by using the system's touch buttons.

Once connected in Streaming mode, the smartphone is considered to be a media source.

116



Connect the Apple

®




The classifications available are those of the portable device connected

(artists / albums / genres / playlists / audiobooks / podcasts), you can also use a classification structured in the form of a library.

The default classification used is by artist. To modify the classification used, return to the first level of the menu then select the desired classification

(playlists for example) and confirm to go down through the menu to the desired track.


®

player.


The system supports USB Mass

Storage devices, BlackBerry or Apple

®

®

players via USB ports. The adaptor cable is not supplied.

devices

players via USB ports. The

Control of the peripheral device is with the audio system controls.

Other peripherals, not recognised on connection, must be connected to the auxiliary socket using a Jack cable (not supplied) or via Bluetooth streaming, depending on compatibility.

It is advisable to restrict file names to

20 characters, without using of special characters (e.g.: " " ? ; ù) to avoid any playing and displaying problems.

Use only USB memory sticks formatted FAT 32

(file allocation table).

It is recommended that the original USB cable for the portable device is used.


USB hub.

The audio equipment will only play audio files with ".wav, .wma, .aac, .ogg and .mp3" file extensions and with a bit rate of between

32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of file (.mp4, ...) can be played.

".wma" files must be of the standard wma 9 type.

The sampling rates supported are 11, 22, 44 and 48 KHz.

In order to be able to play a burned CDR or

CDRW, select standards ISO 9660 level 1, 2 or

Joliet if possible when burning the CD.

If the disc is burned in another format, it may not be played correctly.

It is recommended that the same burning standard is always used on an individual disc, with the lowest speed possible (4x maximum) for the best acoustic quality.


Joliet standard is recommended.


.

117


Telephone



1 2 3 4 5

1 2 3 4 5

118


1 2 3 4 5

1

2

3

4

Level 1

Telephone

Bluetooth search

PHONE

Telephone


Keypad

Telephone


Recent calls

Telephone


Contacts

Level 2


MirrorLink

CarPlay

Level 3

Search

Delete

All

Outgoing

Missed

Incoming

Search

Telephone

Confirm


Comments


Delete one or more devices.

Open the MirrorLink function.

Open the CarPlay function.

Enter a telephone number.

View the calls according to the presentation selected.

Select a contact to make the call.

Search for a contact in the contacts directory.

Go to the details of the contact sheet.


.

119


Level 1

5

Level 2

120


5

Level 1

Telephone

OPTIONS

On hold (auto)

5

5

Telephone

OPTIONS

Sort contacts by name

Sort contacts by first name

Telephone

OPTIONS

Ring volume

ON - OFF

Level 2


Comments

Activate or deactivate the automatic placing on hold of the current conversation.

Sort the contacts by Surname-first name or First name-surname.

Adjust the volume of the ringtone.


.

121


MirrorLink

TM

smartphone connection

122


1




vehicle


MirrorLink

TM

technology to be displayed in the vehicle's screen.

The principles and standards are constantly evolving. For the communication process between the smartphone and the system to work correctly, the smartphone must be unlocked;

update the operating system of your smartphone as well as the date and time in the

smartphone and the system.

For the list of eligible smartphones, connect to the Brand's internet website in your country.

As a safety measure, applications can only be viewed with the vehicle stationary; display is interrupted once the vehicle is moving.

The "MirrorLink

TM

" function requires a compatible smartphone and applications.

Telephone not connected by

Bluetooth

®

Connect the USB cable. The smartphone charges when connected by a USB cable.

From the system, press "

Telephone " to display the primary page.

Press "

MirrorLink

TM

" to start the application in the system.

Depending on the smartphone, it may be necessary to activate the "

MirrorLink

TM

" function.

During the procedure, several screen pages relating to certain functions are displayed.

Accept to start and end the connection.

When connecting a smartphone to the system, it is recommended that "Bluetooth"

® be started on the smartphone

Telephone connected by Bluetooth

®

From the system, press " Telephone " to display the primary page.

1

Press the " PHONE " button to display the secondary page.

Press "

MirrorLink

TM

" to start the application in the system.

Once connection is established, a page is displayed with the applications already downloaded to your smartphone and adapted to the MirrorLink

TM

technology.

Access to the different audio sources remains accessible in the margin of the MirrorLink

TM display, using touch buttons in the upper bar.

Access to the menus for the system is possible at any time using the dedicated buttons

There may be a wait for the availability of applications, depending on the quality of your network.

.

123




124


Level 1 Level 2

Telephone

MirrorLink

TM

Level 3


Comments

Go to or return to the applications already downloaded to your smartphone and adapted to the MirrorLink

TM

technology.

Go to a menu list depending on the application chosen.

"Back": abandon the current operation, go up one level.

"Home": go to or return to the "Car mode" page on your smartphone.

Go to the primary page of the "Telephone" menu.


.

125


1

126





vehicle


From the system, press

Telephone

to display the Carplay


CarPlay

®

technology to be displayed in the vehicle's screen, having first activated the CarPlay

®

function in the smartphone.

As the principles and standards are constantly changing,

it is recommended that you keep your smartphone's

operating system updated .

For the list of eligible smartphones, go to the Brand's internet website in your country.

Or

If the smartphone is already connected by Bluetooth

®

.


From the system, press

Telephone

to display the primary page.

1

Press the " PHONE " button to go to the secondary page.

Press " CarPlay " to display the

CarPlay

®

interface.

On connecting the USB cable, the

CarPlay

®

function deactivates the system's Bluetooth

®

mode.

You can go to the CarPlay

® navigation at any time by pressing the system's

Navigation button.


.

127










Press


Press " Bluetooth search ".

The list of telephones detected is displayed.




Bluetooth function in your telephone.


128



Automatic reconnection

On return to the vehicle, if the last telephone connected is present again, it is automatically recognised and within about 30 seconds of switching on the ignition, the connection is established without any action on your part (Bluetooth activated).

To modify the connection profile :

Press


1


Press " Bluetooth connection " to display the list of paired devices.

Press the "details" button of a paired device.


- " Telephone " (hands-free kit, telephone only),

- " Streaming " (wireless playing of the audio files on the telephone),

- " Internet data ".


The ability of the system to connect with just one profile depends on the telephone.

All three profiles may connect by default.

The services available depend on the network, the SIM card and the compatibility of the Bluetooth devices used. Check in your telephone's manual and with your service provider for the services available to you.

The profiles compatible with the system are HFP, OPP, PBAP, A2DP, AVRCP,

MAP and PAN.

Press "

OK " to confirm. Go to the Brand's website for more information

(compatibility, additional help, ...).

.

129



Managing paired telephones

This function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing.


1


Press " Bluetooth connection " to display the list of paired peripheral devices.

Press on the name of the telephone chosen in the list to disconnect it.

Press again to connect it.

Deleting a telephone

Press the basket at the top right of the screen to display a basket alongside the telephone chosen.

Press the basket alongside the telephone chosen to delete it.

130




Make a short press on the steering mounted PHONE button to accept an incoming call.

Making a call

Using the telephone is not recommended while driving.

Park the vehicle.

Make the call using the steering mounted controls.

And

Or

Make a long press

on the steering mounted

PHONE

button to reject the call.

Press "

End call ".

Calling a new number

Press


Enter the phone number using the digital keypad.



Calling a contact

Press


Or make a long press

Calling a recently used number


Or

Make a long press

on the steering mounted

PHONE

button.

on the steering mounted button.

Press "

Contacts ".

4


Press " Call ".

3

Press " Recent calls ".


Setting the ringtone

Press


5

Press the "


Press "

Ring volume " to display the volume bar.

Press the arrows or move the cursor to set the ring volume.

It is always possible to make a call directly from the telephone; as a safety measure, first park the vehicle.


.

131


Settings



132


1 2 3 4

Level 1

Settings

Brightness

Settings

Profiles

Level 2

Ambience

1

2

Profile 1

Profile 2

3

Profile 3

4

Common profile

Name:

Reset the profile

Profile activated

Settings

Dark

Level 3


Comments


Select a profile.

Profile name modification

Yes / No

Configure the profiles.

Activate/deactivate the profile selected.

Save the settings.

Function which switches off the lit display.

Pressing the screen reactivates it.


.

133


According to equipment

Level 1 Level 2

134


Level 1

Settings

Configuration

System configuration

Level 2

Ambience

Language


Customization

Date and time


Comments

Configure certain system parameters.

Select an ambience for the screen integrated in the system.

Select the display language for the the screen and/or the instrument panel.

Set the configuration of the screen and/or the instrument panel.

Configure the instrument panel for a personalised display.

Set the date and time and select the display format.


.

135


Level 1 Level 2

5 6 7

Level 3

136


8 9 10 11

Level 1

Settings

Configuration

System configuration

5

Units

Level 2

6

Factory settings

7

System info

Settings

Configuration

Ambience

Settings

Configuration

Language

8

9

10

11

All

Europe

Asia

America

Level 3

Distance and fuel consumption

Temperatures

Reset

View


Comments

Configure the display units for the distance, consumption and temperature.

Restore the original settings.

Consult the version of the different modules installed in the system.


Select an ambience for the screen integrated in the system.

Confirm the selection and start the change of ambience.

Select the display language for the screen and/or the instrument panel.

Save the parameter.


.

137


Level 1 Level 2

12 13

Level 3

14 15

138


14 15

Level 1

12

Level 2

Brightness

Settings

Configuration


Settings

Configuration

Temperature conditioning

13

Animation

Customization

Confirm

Settings

Configuration

Date and time

14 Time

15

Date


Level 3 Comments

Select the display brightness level.

Automatic scrolling

Animated transitions

Activate or deactivate the parameters.


Choose and select the display information required.

Time

Time Zone

AM

12h

GPS Synchronisation

Confirm the selections.

Set the time.

Set the time zone.

Select the display format.

Activate or deactivate the synchronisation with the satellites.

Save the settings.

Date


Set the date and select the display format.

Save the settings.

.

139



Profile settings

As a safety measure and because it requires the sustained attention of the driver, changes to settings must only be done with the

Press


Press " Profiles ".

1

Select "

Profile 1 " or " Profile 2 " or

"

Profile 3 " or " Common profile ".

Press this button to enter a name for the profile using the virtual keypad

Press " OK " to save.


140


Press this button to activate the profile.

Press the back arrow again to confirm.

Press this button to initialise the profile selected.

Adjust the brightness

Press


Press Brightness .

Move the cursor to adjust the brightness of the screen and/or of the instrument panel (according to version).



Modifying system settings


5

6

7

Press " Configuration " to go to the secondary page.

Press "

System configuration ".

Press "

Units " to change the units for distance, fuel consumption and temperature.

Press "

Factory settings " to return to the initial settings.

Returning the system to factory settings activates the English language by default (according to version).

Press "

System info " to display the versions of the different modules installed in the system.



Select the language


Press "

Configuration " to go to the secondary page.


Press " Screen configuration ".

Select " Language " to change the language.

12

Press "

Brightness ".

Move the cursor to set the brightness of the screen and/or instrument panel

(according to version).

Press " Animation ".

13

Activate or deactivate: "

Automatic

scrolling ".


Select " Animated transitions ".


.

141



Setting the time



Press "

Date and time ".

14

Select "

Time ".

Press this button to adjust the time using the virtual keypad.

Press "

OK " to save the time.

Press the back arrow to save the settings.

The system does not automatically manage the change between winter and summer time (depending on the country of sale).

Press this button to define the time zone.

Select the display format for the time

(12h / 24h).

Activate or deactivate synchronisation with satellites (UTC).

142


Adjustment of the time and date is only available if "GPS Synchronisation:" is deactivated.

The change between winter and summer time is done by changing the time zone.




Press " Date and time ".

15

Select " Date ".

Press this button to define the date.

Press the back arrow to save the date.

Select the display format of the date.

Press the back arrow again to confirm.



The following table groups together the answers to the most frequently asked questions concerning your audio system.

Radio

QUESTION



ANSWER


The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.

SOLUTION

Activate the "RDS" function by means of the upper band to enable the system to check whether there is a more powerful transmitter in the geographical area.

This phenomenon is normal and does not indicate a fault with the audio system.

The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).


I cannot find some radio stations in the list of stations received.

The station is not received or its name has changed in the list.

The name of the radio station changes.

Some radio stations send other information in place of their name

(the title of the song for example).

The system interprets this information as the name of the station.

Press the round arrow on the "List" tab of the

"Radio" page.


.

143


Media

QUESTION

Playback of my USB memory stick starts only after a very long wait

(around 2 to 3 minutes).

ANSWER

Some files supplied with the memory stick may greatly slow down access to reading the memory stick (multiplication by 10 of the catalogue time).

Some characters in the media information are not displayed correctly while playing.

The audio system does not display some types of characters.

Playing of streaming files does not start.

SOLUTION

Delete the files supplied with the memory stick and limit the number of sub-folders in the file structure on the memory stick.

Use standard characters to name tracks and folders.

The peripheral device connected does not support automatic play. Start the playback from the device.

The names of tracks and the track length are not displayed on the screen when streaming audio.

The Bluetooth profile does not allow the transfer of this information.

144



Telephone

QUESTION

I cannot connect my

Bluetooth telephone.

ANSWER

The telephone's Bluetooth function may be switched off or the telephone may not be visible.

The Bluetooth telephone is not compatible with the system.

SOLUTION

Check that your telephone's Bluetooth function is switched on.

Check in the telephone settings that it is "visible to all".

You can check the compatibility of your telephone at the Brand's website (services).

The volume of the telephone connected in Bluetooth mode is inaudible.

The volume depends both on the system and on the telephone. Increase the volume of the audio system, to maximum if required, and increase the volume of the telephone if necessary.

The ambient noise level has an influence on the quality of telephone communication.

Reduce the ambient noise level (close the windows, reduce the booster fan speed, slow down, ...).

Contacts are not shown in alphabetical order.

Some telephones offer display options. Depending on the settings chosen, contacts can be transferred in a specific order.

Modify the display setting in the telephone directory.


.

145


Settings

QUESTION

In changing the setting of treble and bass the equalizer setting is deselected.

In changing the equalizer setting, treble and bass return to zero.

ANSWER

The selection of an equalizer setting imposes the settings for treble and bass and vice-versa.

SOLUTION

Modify the treble and bass or equalizer settings to obtain the desired musical ambience.

When changing the balance settings, the distribution setting is deselected.

The selection of a distribution setting imposes the balance settings and vice-versa.

Modify the balance or distribution settings to obtain the desired musical ambience.

When changing a distribution setting, the balance setting is deselected.

There is a difference in sound quality between the different audio sources.

For optimum sound quality, the audio settings can be adapted to the different sound sources, which may result in audible differences when changing source.

Check that the audio settings are adapted to the sources listened to. Adjust the audio functions to the middle position.

With the engine off, the system switches off after a few minutes of use.

When the engine is switched off, the system's operating time depends on the state of charge of the battery.

The switch-off is normal: the system switches to economy mode and switches off to prevent discharging of the vehicle's battery.


146



Bluetooth

®

audio system

As a safety measure and because it requires the sustained attention of the driver, the pairing of your Bluetooth telephone to the Bluetooth hands-free audio system must only be carried out with the vehicle stationary and the ignition on.

First steps


Contents

148

149

Steering mounted controls - Type 2 150

Menus 151

Radio 152

DAB (Digital Audio Broadcasting) radio 154

Media 156

Telephone 161

Frequently asked questions 166

The different functions and adjustments described vary according to the version and configuration of your vehicle.

Your audio system is coded in such a way that it will only operate in your vehicle.

All work on the system must be carried out exclusively by a dealer or qualified workshop, to avoid any risk of electrocution, fire or mechanical faults.

To avoid discharging the battery, the audio system may switch off after a few minutes if the engine is not running.

.

147

Transversal-Citroen_en_Chap03_RD6_ed01-2016

148


First steps

Press: On / Off

Rotate: adjust volume.

Short press: change audio source

(Radio; USB; AUX (if a device is connected); CD; Streaming).

Long press: display the

Telephone

menu (if a telephone is connected).

Adjust audio settings:

Front/rear fader; left/right balance; bass/treble; loudness; audio ambience.

Activation / Deactivation of automatic volume adjustment (linked to the speed of the vehicle).

Radio:



Media:



Select the screen display mode, between:

Date; Audio functions; Trip computer;

Telephone.

Confirm or display contextual menu.

Buttons 1 to 6.

Short press: select the preset radio station.

Long press: preset a station.

Radio:

Automatic step by step search up / down for radio stations.

Media:

Select previous / next CD, USB, streaming track.

Scroll in a list.

Radio:

Manual step by step search up / down for radio stations.

Select previous / next MP3 track.

Media:

Select previous / next folder / genre / artist / playlist on the USB device.

Scroll in a list.

Abandon the current operation.

Go up one level (menu or folder).

Access to main menu.

Activate / Deactivate TA (traffic announcements)

Long press: select type of announcement.

Select waveband: FM / DAB / AM.



Radio :



Media:

Select of the previous / next track.


Other than telephone calls :


(Radio; USB; AUX (if a device is connected); CD; Streaming), confirm if the " Telephone " menu is open.

Long press: open the " Telephone " menu.

In the event of a telephone call :

Short press: accept the call.

Long press: reject the call.

During a telephone call:

Short press: open the contextual telephone menu.

Long press: end the call.

Radio :



Media :



Confirm a selection.

Increase volume.

Decrease volume.

Mute / Restore sound by simultaneously pressing the increase and decrease volume buttons.

.

149


150



Access to the main menu.

Increase volume.

Mute / Restore sound.

Decrease volume.

Other than telephone call:


(Radio; USB; AUX (if a device is connected); CD; Streaming), confirm if the " Telephone " menu is open.

Long press: open the " Telephone " menu.

In the event of a telephone call:

Short press: accept the call.

Long press: reject the call.

During a telephone call:

Short press: open the contextual telephone menu.

Long press: end the call.

Start voice recognition of your smartphone via the system.

Radio:



Media:



Radio:



Media:

Select the previous / next track.


Press the thumbwheel: confirm.

Menus

Depending on version.

" Multimedia ": Media settings, Radio settings.

"

Telephone ": Call, Directory management, Telephone management, End call.

" Trip computer ".

"

Maintenance ": Diagnosis, Warning log, ...

" Connections ": Manage connections, search for devices.

"

Personalisation-configuration ":

Define the vehicle settings, Choice of language, Display configuration,

Choice of units, Date and time adjustment.

Press the " MENU " button.

Move from one menu to another.

Enter a menu.



.

151

152


Radio


Press the SOURCE button repeatedly and select the radio.

Press this button to select a waveband (FM / AM / DAB).

Press one of the buttons to carry out an automatic search for radio stations.

Press one of the buttons to carry out a manual search up / down for radio frequencies.

Press this button to display the list of stations received locally.

To update this list, press for more than two seconds. The sound is cut while updating.

RDS

The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio system.

Short procedure

In " Radio " mode, press the OK button to activate or deactivate RDS directly.

Long procedure

Press the "

MENU " button.

If RDS is not available, the RDS symbol appears barred in the screen.

RDS, if activated, enables you to continue listening to the same station by automatic retuning to alternative frequencies.

However, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of a station that can occur during a journey.

Select " Audio functions ".

Press

OK .

Select the "

FM waveband

preferences " function.

Press

OK .

Select "

RDS ".

Press

OK , RDS is displayed in the screen.


Receiving TA messages

The TA (Traffic Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message.

When a traffic report is transmitted, the current audio source (Radio, CD, ...) is interrupted automatically to play the

TA message. Normal playback of the audio source resumes at the end of the transmission of the message.

Receiving INFO messages

The INFO function gives priority to TA traffic announcements. To be active, this function needs good reception of a radio station that transmits this type of message. When a message is transmitted, the current audio source

(Radio, CD, USB, ...) is interrupted automatically to receive the INFO message. Normal play resumes at the end of the message transmission.

Take care when increasing the volume while listening to TA messages. The volume may prove too high on return to the original audio source.

Make a long press on this button to display the list of categories.

Select or deselect categories.

Press the TA button to activate or deactivate traffic messages.

Activate or deactivate the reception of the corresponding messages.

Display RADIO TEXT

Radio text is information transmitted by the radio station related to the current programme or song.

With the radio displayed on the screen, press OK to display the contextual menu.

Select " RadioText (TXT) display " and confirm OK to save.

.

153


154


DAB (Digital Audio Broadcasting) radio


If the current "DAB" radio station is not available on "FM", "DAB FM" is struck out.

Display the name of the multiplex service being used.

1 2

4

5

6

Display RadioText (TXT) for the current radio station.

Represents the signal strength for the band being listened to.

6

1

5 4 3

Display options:

if active but not available, the display will be struck out.

When changing region, an update of the list of preset radio stations is advisable.

2

3

Display the name of the current radio station.

Preset radio station, buttons 1 to 6.

Short press: select the preset radio station.

Long press: preset a radio station.

Display the list of all radio stations and "multiplexes".

Terrestrial digital radio

Digital radio provides a superior audio quality and also additional categories of traffic announcements (TA INFO).

The different "multiplex services" offer a choice of radio stations in alphabetical order.

Change of band (FM1, FM2, DAB,...)

Change of station within the same

"multiplex service".

Starting of a search for the previous / next "multiplex service".

Long press: select the desired categories of announcements from

Transport, News, Entertainment and

Flash special (availability according to the station).


When the radio station is displayed in the screen, press on "

OK " to display the contextual menu.

(Frequency search (RDS), DAB / FM auto tracking, RadioText (TXT) display,

Information on the station, ...)

DAB / FM tracking

"DAB" does not have 100% coverage of the country.

When the digital signal is weak,

"DAB / FM auto tracking" allows you to continue listening to the same station, by automatically switching to the corresponding analogue "FM" station

(if there is one).

When "DAB / FM auto tracking" is active, the DAB station will be selected automatically.

Press the "

MENU " button.

Select "

Multimedia " and confirm.

Select " DAB / FM auto tracking " and confirm

If "DAB / FM auto tracking" is activated, there will be a difference of a few seconds in the programme when the system changes to analogue "FM" radio, with sometimes a variation in volume.

If the "DAB" station you are listening to is not available on "FM" (" DAB/FM " option barred), or if "DAB / FM auto tracking" is not on, the sound will be cut when the digital signal is too weak.

.

155


156


Media

USB port

This unit consists of a USB port and an auxiliary Jack socket, depending on version.


USB hub.

Any additional equipment connected to the system must conform to the standard of the product or standard IEC 60950-1.

The system creates playlists (temporary memory), which can take from a few seconds to several minutes on the first connection.

Reducing the number of non-music files and the number of folders reduces this waiting time. Playlists are updated every time a new

USB memory stick is connected.

Insert a USB memory stick into the USB port or connect a USB peripheral device to the USB port using a suitable cable (not supplied).

The system changes automatically to "USB" source.

Play mode

The play modes available are:

-

Normal : the tracks are played in order, depending on the classification of the selected files.

-

Random : the tracks in an album or folder are played in a random order.

-

Random on all media : all of the tracks saved in the media are played in random order.

-

Repeat : the tracks played are only those from the current album or folder.

While connected by USB, the portable device may be charged automatically.

Press this button to display the contextual menu for the Media function.

Press this button to select the play mode.

Press this button to confirm.

The choice made is displayed at the top of the screen.


Choosing a track to play

Press one of these buttons to go to the previous / next track.

File classifi cation

Make a long press on this button to display the different classifications.

Playing fi les

Make a long press on this button to display the chosen classification.

Press one of these buttons to go to the previous / next folder.

Choose by "

Folder " / " Artist " /

"

Genre " / " Playlist " * .

Press OK to select the desired classification, then press OK again to confirm.

Navigate in the list using the left / right and up / down buttons.

Confirm the selection by pressing

OK .

Press one of these buttons to go to the previous / next track in the list.

Press and hold one of these buttons for fast forward or fast back.

* Depending on availability and the type of device used.

Press one of these buttons to go to the next " Folder " / " Artist " /

" Genre " / " Playlist " * in the list.

.

157



158

Jack auxiliary (AUX) socket CD player

Insert circular compact discs only.

Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no reflection on the quality of the vehicle's player.

Insert a CD in the player, play begins automatically.

Playing an MP3 compilation

Insert an MP3 CD compilation in the player.

The audio equipment searches for all of the music tracks, which may take anything between a few seconds and several tens of seconds, before play begins.

Connect the portable device (MP3 player, …) to the auxiliary Jack socket using an audio cable

(not supplied).

Any additional equipment connected to the system must conform to the standard of the product or standard

IEC 60950-1.

Press the SOURCE button several times in succession and select

" AUX ".

First adjust the volume on your portable device

(to a high level). Then adjust the volume on your audio system. Operation of controls is via the portable device.

Do not connect a device to both the

Jack auxiliary socket and the USB port at the same time.

External CD players connected via the

USB port are not recognised by the system.

To play a disc which has already been inserted, press the

SOURCE

button several times in succession and select CD.

Press one of the buttons to select a track on the CD.

Press the LIST button to display the list of tracks on the CD.

Press and hold one of the buttons for fast forward or fast back.

On a single disc, the CD player can read up to 255 MP3 files spread over

8 folder levels.

However, it is advisable to keep to a limit of two levels to reduce the access time before the CD is played.

While the CD is being played, the folder structure is not followed.

All of the files are displayed on a single level.


Bluetooth

®

Streaming allows music files on the telephone to be played via the audio system.

To play a disc which has already been inserted, press the

SOURCE

button several times in succession and select

CD.

Press one of the buttons to select a folder on the CD.

Connect the telephone.

(Refer to the "

Pairing a telephone " section).

Activate the streaming source by pressing the SOURCE * button.

Press one of the buttons to select a track on the CD.

Press the LIST button to display the list of directories of the MP3 compilation.

Press and hold one of the buttons for fast forward or backward play.

Audio files can be selected using the buttons on the audio system control panel and the steering mounted controls ** . Contextual information may be displayed in the screen.

Connect the Apple

®




The classifications available are those of the portable device connected (artists / albums / genres / playlists).


®

player.

* In certain cases, play of the audio files must be initiated from the keypad.

** If the telephone supports the function. The audio quality depends on the quality of transmission by the telephone.

.

159



160


The CD player can play files with .mp3, .wma,

.wav and .aac file extensions, with a bit rate of of 32 to 320 Kbps.

It also supports TAG mode (ID3 tag, WMA TAG).

Other file types (mp4, ...) may be played.

Files of the ".wma" type should be to the wma9 standard.


In order to be able to play a recorded CDR or

CDRW, the ISO 9660 level 1. 2 or Joliet file format is recommended when recording.

If the disc is recorded in another format, it may not be played correctly.

It is recommended that the same recording format is always used for an individual disc, with as low a speed as possible (4x maximum) for optimum sound quality.


Joliet format is recommended.

Via the USB port, the system can play audio files with the extension ".mp3, .wma, .wav, .cbr,

.vbr" with a bit rate of 32 to 320 Kbps.

No other file types (.mp4, ...) can be played.

Files of the ".wma" type should be to the wma9 standard.


To protect the system, do not use a USB hub.

Use only USB memory sticks formatted

FAT32 (File Allocation Table).

File names should have less than

20 characters, avoiding special characters

(e.g.: " ? ; ù) so as to avoid any reading or display problems.

It is recommended that you use genuine Apple

®

USB cables for correct operation.


Telephone

As a safety measure and because it requires the sustained attention of the driver, the pairing of your a Bluetooth telephone to the Bluetooth hands-free audio system must only be carried out with the vehicle stationary and the ignition on

Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone configuration).




Press the MENU button.

Select the "

Connections " menu.

Confirm with OK .

Select "

Search for a Bluetooth

device ".

Confirm with

OK .

Completing the pairing

To complete the pairing, whichever procedure is used (from the telephone or from the system), check that the code displayed in the system and the telephone is the same and confirm.

If pairing fails, the number of attempts is not restricted.

A message appears in the screen confirming the pairing.


The " Telephone " menu gives access to the following functions in particular: " Directory " * ,

" Calls list ", " View paired devices ".

Depending on the type of telephone, you may be asked to accept or confirm access by the system to each of these functions.

The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.

Refer to the instructions for your telephone and to your service provider for the services available to you.

A window is displayed with a search in progress message.

In the list of devices detected, select a telephone to pair. Only one telephone can be paired at a time.

Go to the Brand's website for more information (compatibility, more help, ...).

* If your telephone is fully compatible.

.

161


162


Managing connections

The telephone connection automatically includes hands-free operation and audio streaming.

The ability of the system to connect to just one profile depends on the telephone. Both profiles may connect by default.

Press the MENU button.

Select "

Connections ".

Confirm with

OK .

Select "

Connections management " and confirm. The list of paired devices is displayed.

Confirm with

OK.

Indicates that a device is connected.

A number indicates the profile of the connection with the system:

- 1 for media or 1 for telephone.

- 2 for media and telephone.

Indicates the audio streaming profile.

Indicates the hands-free telephone profile.

Select a telephone.

Confirm with OK .

Then select and confirm:

- " Connect telephone " /

" Disconnect telephone ": to connect / disconnect the telephone or the hands-free kit only.

- " Connect media player " /

" Disconnect media player ": to connect / disconnect streaming only.

- "

Connect telephone +

media player " / " Disconnect

telephone + media player ": to connect / disconnect the telephone (hands-free kit and streaming).

- " Delete connection ": to delete the pairing.

When you delete a pairing in the system, remember to delete it from your telephone as well.

Confirm with

OK .




Select the "

YES

" tab in the screen using the buttons.

Confirm with

OK .

Press this button at the steering mounted controls to accept the call.

Making a call

In the " Telephone " menu.

Select "

Call ".

Select " Dial ".

Or

Select " Directory ".

Or

Select " Calls list ".

Confirm with

OK .

Press this button for more than two seconds for access to your directory, then navigate using the thumb wheel.

Ending a call

In the " Telephone " menu.

Select "

End call ".

Confirm with

OK to end the call.

During a call, press one of the buttons for more than 2 seconds.

The system accesses the telephone's contacts directory, depending on its compatibility, and while it is connected by Bluetooth

With certain telephones connected by

Bluetooth, you can send a contact to the directory of the audio system.

Contacts imported in this way are saved in a permanent directory visible to all, whatever the telephone connected.

The menu for the directory is not accessible if it is empty.

.

163


164


Managing calls

During a call, press OK to display the contextual menu.

Hang up

In the contextual menu, select "

End

call " to end the call.

Telephone mode

In the contextual menu:

- select "

Telephone mode " to transfer the call to the telephone

(for example, to leave the vehicle while continuing a conversation).

- deselect "

Telephone mode " to transfer the call to the vehicle.

Interactive voice response

From the contextual menu, select

"

DTMF tones " and confirm to use the digital keypad to navigate in the interactive voice response menu.

Confirm with

OK .

Confirm with

OK .

Confirm with

OK .

Microphone off

(so that the caller cannot hear)

In the contextual menu:

- select "

Micro OFF " to switch off the microphone.

- deselect "

Micro OFF " to switch the microphone on.

Confirm with

OK .

If the contact has been cut off, when you reconnect on returning to the vehicle, the Bluetooth connection will be restored automatically and sound returned to the system (depending on the compatibility of the telephone).

In some cases telephone mode must be activated from the telephone.

Dual call

From the contextual menu, select

" Switch " and confirm to return to a call left on hold.

Confirm with OK .

Directory

The system accesses the telephone's contacts directory, depending on its compatibility, and while it is connected by Bluetooth.

With certain telephones connected by Bluetooth you can send a contact to the directory of the audio system.

Contacts imported in this way are saved in a permanent directory visible to all, whatever the telephone connected.

The menu for the directory is not accessible if it is empty.

Make a long press on

SRC/TEL .


Select " Directory " to see the list of contacts.

Confirm with

OK .

To modify the contacts saved in the system, press

MENU then select

"

Telephone " and confirm.

Select "

Directory management " and confirm.

You can:

- "

Consult an entry ",

- "

Delete an entry ",

- "

Delete all entries ".

Voice recognition

This function allows you to use your smartphone's voice recognition via the system.

To start voice recognition, depending on the type of steering mounted controls:

Make a long press on the end of the lighting control stalk.

OR

Press this button.

Voice recognition requires the use of a compatible smartphone first connected to the vehicle by Bluetooth.

.

165


166



The table below gives answers to the most frequently asked questions on your audio system.

QUESTION

With the engine off, the audio system switches off after a few minutes of use.

The message "the audio system is overheated" appears on the display.

ANSWER

When the engine is switched off, the audio system operating time depends on the state of charge of the battery.

The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.

In order to protect the installation if the surrounding temperature is too high, the audio system switches to an automatic thermal protection mode leading to a reduction in volume or CD play stopping.

SOLUTION


Switch the audio system off for a few minutes to allow the system to cool.

Radio

QUESTION

There is a difference in sound quality between the different audio sources

(radio, CD...).

ANSWER

For optimum sound quality, the audio settings (Volume, Bass,

Treble, Ambience and Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD...).

SOLUTION

Check that the audio settings (Volume, Bass,

Treble, Ambience and Loudness) are adapted to the sources listened to. It is advisable to set the audio functions (Bass, Treble, Front-Rear Balance and Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.


QUESTION

The preset stations do not function (no sound,


ANSWER

An incorrect waveband is selected.

SOLUTION

Press the BAND button to return to the waveband

(FM, FM2, DAB, AM) on which the stations are preset.

The traffic announcement

(TA) is displayed. I do not receive any traffic information.



The radio station is not part of the regional traffic information network.

Tune to a radio station which broadcasts traffic information.


The environment (hills, buildings, tunnels, underground car parks...) block reception, including in RDS mode.

Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.

This phenomenon is normal and does not indicate a fault in the audio system.

The aerial is absent or has been damaged (for example when going through an automatic car wash or into an underground car park).


Sound cut-outs of 1 to

2 seconds in radio mode.

During this brief sound cut-out, the RDS searches for another frequency giving better reception of the station.

Deactivate the RDS function if the phenomenon is too frequent and always on the same route.

.

167


168


Media

QUESTION

The Bluetooth connection is broken.

ANSWER

The state of charge of the device may be too low.

The message "USB device error" is displayed in the screen.

The USB memory stick is not recognised.

The USB memory stick may be corrupt.

The CD is ejected every time or is not played.

The CD is upside down, cannot be read, does not contain audio files or contains audio files of a format not recognised by the audio system.

The CD is protected by an anti-pirating system not recognised by the audio system.

SOLUTION

Charge the battery of the portable device.

Reformat the USB memory stick.

- Check that the CD is inserted in the player the right way up.

- Check the condition of the CD: the CD cannot be played if it is too damaged.

- Check the content in the case of a recorded

CD: consult the advice in the "Audio" section.

- Due to their quality level, certain writeable

CDs will not be played by the audio system.

The sound from the CD is poor.

I am unable to play the music files on my smartphone via the USB port.

The CD used is scratched or of poor quality. Insert a good quality CD and store them in suitable conditions.

The audio settings (base, treble, ambience) are unsuitable. Return bass and treble settings to 0, without selecting an ambience.

Depending on the smartphone, access by the audio system to music on the smartphone may have to be approved on the latter.

Manual activate the MTP profile on the smartphone (USB settings menu).


Telephone

QUESTION

I am unable to access my voicemail.

I am unable to access my directory of contacts.

ANSWER SOLUTION

Few telephones or service providers allow the use of this function. Call your voicemail box, via the telephone menu, using the number supplied by your service provider.

Check the compatibility of your telephone.

You did not give access to your contacts when pairing the telephone. Accept or confirm access by the system to the contacts on your telephone.

I am unable to continue a conversation when getting into my vehicle.

Telephone mode is activated. Deselect telephone mode to transfer the call to the vehicle.

I am unable to pair my telephone by Bluetooth.

Telephones (models, versions of operating systems) have their own specific aspects in the pairing procedure and some telephones are not compatible.

Before starting the pairing procedure, delete the pairing of the telephone from the system AND of the system from the telephone, so as to see the compatibility of the telephones.

.

169


Transversal-Citroen_en_Chap04_fi n

4Dconcept

Diadeis

Interak

05-16

I 06-16

Transversal-Citroen_en_Chap04_fi n

*16SYSCC040*

CITROËN C4 Picasso Connect Nav car media receiver User manual

Assistant Bot

AUDIO AND TELEMATICS GUIDE

On-line handbook

CITROËN Connect Nav

First steps

Steering mounted controls

Menus

Air conditioning

Connected navigation

Applications

Driving

Radio Media

Telephone

Settings

Voice commands

Steering mounted controls

First steps

Information - Using the system

Global voice commands

"Navigation" voice commands

"Radio Media" voice commands

"Telephone" voice commands

"Test message" voice commands

Navigation

Choosing a new destination

Connected navigation

Connected navigation connection

Display the weather

Applications

Internet Browser

Connectivity

Applications

MirrorLink

smartphone connection

Bluetooth

connection

Wi-Fi connection

Sharing the Wi-Fi connection Managing connections

Radio Media

Radio

DAB radio (Digital Audio Broadcasting)

Media

Telephone

Settings

Audio settings

Profile settings

Modifying system settings

Select the language

Setting the date

Setting the time

Color schemes

Frequently asked questions

Navigation

Radio

Media

Telephone

Settings

CITROËN Connect Radio

First steps

Steering mounted controls - Type 1

Steering mounted controls - Type 2

Menus

Air conditioning Applications

Navigation

Radio Media

Driving

Telephone Settings

Applications

Viewing photos

Radio Media

Radio

Changing waveband

Audio settings

DAB radio (Digital Audio Broadcasting)

Media

Telephone

MirrorLink

smartphone connection

Setting the ringtone