Installation Manual
A Wilson Electronics Brand
WILSON PRO
1000R
In-Building Signal Booster
With Extended Dynamic Range
User Manual
NEED HELP?
wilsonpro.com
866.294.1660
_____
Index
Package Content
1
About The WilsonPro 1000R
Key Features
Post Install Setup
5
8
Safety Guidelines
7
Band Status Screens
Warranty
2
4
Competitive Advantages
Status Screen
10
12
17
________
Package
Content
WilsonPro
1000R
Wide Band Directional
Antenna + 75’
Wilson 400 Cable
2’ Wilson
400
Dome Antenna +
100’ Wilson 400 Cable
Lightning Surge
Protector
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
1
WilsonPro 1000R
Easy Rack-Mounted
Installation
Neat and clean installation while leaving
the unit easily accessible.
Onboard Software For
Better Control
Automatically controlled with onboard
software, ensuring great connectivity
throughout large spaces and multi-story
buildings.
Extended Dynamic
Range For Continuous
Connectivity
XDR allows the booster to never shutdown
due to too strong of a signal. No matter how
strong, the booster will never overpower and
shutdown.
Color LCD For Easier
Access
Unlike other boosters, the WilsonPro
1000R has a color LCD screen
with four-way navigation, allowing
integrators to have easy and effective
control of the product.
2
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
The 1000R provides cellular coverage for all commercial spaces
Designed to provide enhanced
in-building cellular coverage for
all commercial spaces, including
hospitals, hotels, warehouses and offices, the WilsonPro 1000R amplifies
weak cell signals to provide reliable voice and data coverage–including 4G – to inside
spaces where signals may not penetrate.
Like all WilsonPro cellular signal boosters, the WilsonPro 1000R features cell site
protections that auto-detect and prevent any cell tower interference.
Unlike other boosters, the WilsonPro 1000R has a color LCD screen with four-way
navigation, allowing integrators to have easy and effective control of the product.
The 1000R is intended to fit into an existing server rack. This design allows for a neat
and clean installation while leaving the unit easily accessible.
XDR gives the 1000R the greatest tolerance of any competing booster for a strong
incoming signal from the tower. XDR allows the booster to never shutdown due to
too strong of a signal. No matter how strong, the booster will never overpower and
shutdown.
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
3
____________
Key Features
Easy rack-mounted installation: The 1000R is intended to fit into
an existing server rack. This design allows for a neat and clean
installation while leaving the unit easily accessible.
Onboard Software for Better Control: Booster is automatically
controlled with automatic onboard software, ensuring great
connectivity throughout large spaces and multi-story buildings.
The booster will adjust its gain level up or down as required by the
conditions of the immediate signal environment.
Extended Dynamic Range (XDR) for continuous connectivity: Gives
the 1000R much greater tolerance than any competing booster for
a strong incoming signal from the tower. XDR lets the 1000R system
work with an incoming signal stronger than any competing booster
and never shuts down.
Color LCD for Easier Access: Unlike other boosters, the Wilson
1000R has a color LCD screen with four-way navigation, allowing
integrators to optimize antenna position and maximize the
performance of the booster.
4
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
___________
Competitive
Advantages
Highest Downlink Power: Up to +12dB more downlink power than
the competition allows for stronger signal in environments where
the incoming signal is weak. The benefit is a stronger signal sent to
the inside antennas, providing larger coverage area from a single
booster.
Highest Uplink Power: This allows for a stronger signal transmitted
to the tower, up to +3dB more than the competition, providing greater
user capacity and increased range from the cell site.
Lower Overload and Shutdown Threshold: No matter how strong
the outside signal, the WilsonPro 1000R never shuts down. This is a
huge benefit in strong signal environments like cities and locations
close to a carrier tower.
Intelligent Control: WilsonPro cellular boosters automatically adjust
signal gain while still providing even signal coverage throughout the
building.
Sophisticated Software: Cellular signals are constantly fluctuating.
The software is always monitoring signal levels and making
immediate adjustments as needed, allowing the booster to operate at
maximum gain consistently.
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
5
__________
Installation
Diagram
A Wilson Lightning Surge Protector is recommended for all building installations. Make
sure the protector is installed outside the building at point of entry connected to a
suitable ground and in line between the Outside Antenna and the Signal Booster.
Outside
Directional
Antenna
Inside Dome
Antenna(s)
1000R
The direction of the
outside antenna should
be adjusted until the
“DL” bar is maximized.
2-way radios are included
to help with the installation
process.
6
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
__________
Post Install
Setup
The WilsonPRO 1000R is designed with advanced internal programming, which allows
it to automatically adjust for a variety of conditions, while still boosting weak signals.
Once the AC power cable and antenna cables are connected, turn the unit on by
toggling the power switch located near the AC power receptacle, located at the rear
of the unit.
Power Switch
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
7
____________
Status Screen
The 1000R takes about 20 seconds to boot up. Once boot up is complete, the status
screen will appear, showing the amplification and status of each port and band.
System Status Screen
Splash Screen
Lights Description
A solid green light indicates that
a band is operating correctly with
maximum allowable gain.
A solid yellow light indicates band gain
reduction because of an oscillation
condition. Reposition antennas
(more separation between indoor
and outdoor antennas, and pointed
in opposite directions) and reboot
(power cycle) the 1000R for maximum
performance. When adequate
separation is achieved, the yellow
lights will return to green upon reboot.
Note that when the light is yellow,
the band is operational; however,
performance is reduced.
8
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
________
(LIGHTS DESCRIPTION cont.)
A red light indicates a band which has
been completely shut down because
of a severe oscillation condition or
repeated oscillation events. Reposition
antennas (more separation between
indoor and outdoor antennas, and
pointed in opposite directions) and
then reboot (power cycle) the 1000R
to reactivate the band and maximize
performance. When adequate
separation is achieved, the red light(s)
will return to green upon reboot.
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
9
______________
Band Status Screens
Green Light
By pressing enter on a highlighted light,
as shown, a more detailed status screen
will be displayed for the highlighted band.
D-Pad with Enter
button
Status Screen
Close-up
This screen provides specific band
and port information. Including the
strength of the received uplink and
downlink signal, status details, and
the amplifier gain.
Band Details Screen
10
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
___________
(BAND STATUS SCREENS - GREEN LIGHT cont.)
In the presence of a strong outdoor
cell tower signal, the 1000R will
reduce it’s “boost” (Gain) using
internal Automatic Gain Control (AGC).
This gain reduction is necessary to
stay within FCC requirements. When
this occurs, the 1000R has reached
Band Details Screen
the ‘speed limit’ so this is good!
The outside antenna should always
be adjusted until the “DL” bar is
maximized and “AGC” is indicated, if
possible with a weak outside signal,
this may not be possible.
Yellow Light
Pressing enter on a highlighted light
with a yellow light (Band 12), as shown,
will display the following...
D-Pad with Enter
button
Status Screen
Close-up
This screen indicates band gain
has been reduced because of the
oscillation condition detected at a
nearby band.
Band Details Screen
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
11
______________
Safety Guidelines
Warnings
o uphold compliance with network protection standards, all active cellular devices
T
must maintain at least 6 feet of separation distance from Panel and Dome antennas.
Use only the power supply provided in this package. Use of a non-Wilson Electronics
product may damage your equipment.
The Signal Booster unit is designed for use in an indoor, temperature-controlled
environment (less than 100 degrees Fahrenheit). It is not intended for use in attics or
similar locations subject to temperatures in excess of that range.
RF Safety Warning: Any antenna used with this device must be located at least 8
inches from all persons.
AWS Warning: The Outside Antenna must be installed no higher than 10 meters (31’9”)
above ground.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have
your provider’s consent. Most wireless providers consent to the use of signal boosters.
Some providers may not consent to the use of this device on their network. If you are
unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the
manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a
licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls
served by using this device.
This device may be operated ONLY in a fixed location for in-building use.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.
FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR
WIRELESS PROVIDER, PLEASE SEE BELOW:
Sprint: http://www.sprint.com/legal/fcc_boosters.html
T-Mobile/MetroPCS: https://support.t-mobile.com/docs/DOC-9827
Verizon Wireless: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html
AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
12
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
_________________
Antenna Kit Options
The following accessories are certified by the FCC to be used with the
Wilson PRO 1000R.
Inside Antenna Expansion Kit
Kit 309900-50N40090
2 - Wall Panel antennas
1 - 50 ohm 3-Way Splitter
1 - 100' Wilson 400
Kit 309905-50N17420
3 - Wall Panel Antennas
3 - 2-Way 50 Ohm Splitters
20' RG174
Kit 309902-75F0650
2 - Wall Panel Antennas
1 - 3-Way 75Ohm Splitter
50' RG6
Kit 309903-75F1180
3 - Wall Panel Antennas
3 - 2-Way 75Ohm Splitters
80' RG11 cable
Kit 309904-75F5830
1 - Wall Panel Antenna
1 - 2-Way 75 Ohm Splitter
30' RG58 cable
Inside Antenna Kits
Kit 311155-0670
75 Ohm Wall mount Panel Antenna
70’ RG6 Cable
Kit 311135-5840
50 Ohm Wall mount Panel Antenna
40’ RG58 Cable
Kit 311135-400150
50 Ohm Wall mount Panel Antenna
150' Wilson 400
Kit 311155-11120
75 Ohm Wall mount Panel Antenna
10’ RG11 cable
Kit 304412-400100
50 Ohm 4G Dome Antenna
100' Wilson400 cable
Kit 304412-5830
50 Ohm 4G Dome Antenna
30' RG58 cable
Kit 304419-1175
75 Ohm 4G Dome Antenna
75' RG 11 cable
Kit 304419-17450
75 Ohm 4G Dome Antenna
50' RG174 cable
May need separate adapter
Kit 304419-0650
75 Ohm 4G Dome Antenna
50' RG6 cable
50 Ohm Outside Antenna Kits
Kit 314453-5825
50 Ohm Pole Mount Panel Antenna
25’ RG58 Cable
Kit 314411-5825
50 Ohm Wide Band Directional
25’ RG58 Cable
Kit 301111-5850
Yagi Directional Antenna
50’ RG58 Cable
Kit 311203-5820
Omni-Directional antenna
20’ RG58 Cable
Kit 314411-40075
50 Ohm Wide Band Directional
75’ LMR400 Cable
Kit 311203-40020
Omni-Directional antenna
20’ LMR400 Cable
Kit 301111-400170
Yagi Directional w/ N-Female
170’ LMR400
Kit 314453-40075
50 Ohm Pole Mount Panel Antenna
75’ LMR400 Cable
Kit 304422-40020
50 Ohm 4G Omni Antenna
20’ Wilson400 cable
Kit 304422-5810
50 Ohm 4G Omni Antenna
10’ RG58 cable
Kit 304422-1120
50 Ohm 4G Omni Antenna
20’ RG11 cable
May need separate adapter
Kit 311141-0620
75 Ohm Grey Brick Antenna
20’ RG6 Cable
Kit 301111-11140
Yagi Directional Antenna
140’ RG11 Cable
N-Male to F-Female adapter
Kit 311201-1120
Omni Directional w/ F-Female
20’ RG11 Cable
Kit 314473-1175
75 Ohm Pole Mount Panel Antenna
75’ RG11 Cable
Kit 314475-0630
75 Ohm Wide Band Directional
30’ RG6 Cable
Kit 314475-1175
75 Ohm Wide Band Directional
75’ RG11 Cable
Kit 311141-1120
75 Ohm Grey Brick Antenna
20’ RG11 Cable
Kit 304421-17410
75 Ohm 4G Omni Antenna
10’ RG174 cable
Kit 304421-0610
75 Ohm 4G Omni Antenna
10’ RG6 cable
Kit 304421-5810
75 Ohm 4G Omni Antenna
10’ RG58 cable
May need separate adapter
Kit 304421-1120
75 Ohm 4G Omni Antenna
20’ RG 11 cable
75 Ohm Outside Antenna Kits
Kit 301111-0675
Yagi Directional Antenna
75’ RG6 Cable
N-Male to F-Female adapter
Kit 311201-0620
Omni Directional w/ F-Female
20’ RG6 Cable
Kit 314473-0640
75 Ohm Pole Mount Panel Antenna
40’ RG6 Cable
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
13
___________
Specifications
Product Number
460037
Model Number
460037
FCC ID
PWO460037
Connectors
N-Female
Antenna Impedance
50 Ohms
Frequency
698-716 MHz, 729-746 MHz, 777-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz
Passband Gain (nominal)
700MHz Band12/17
57.6
700MHz Band13
58.0
800MHz
59.2
1700/2100MHz
65.7
1900MHz
65.2
700MHz Band12/17
700MHz Band13
800MHz
1700/2100MHz
1900MHz
20 dB Bandwidth (MHz)
29.6
35.4
30.3
35.4
36.8
37.8
77.5
81.0
74.5
75.1
Power output for single cell
phone (Uplink) dBm
Typical
Maximum
700MHz Band12/17
700MHz Band13
800MHz
1700MHz
1900MHz
25.3
25.8
24.7
26.2
25.3
Power output for single cell
phone (Downlink) dBm
700MHz Band12/17
700MHz Band13
800MHz
2100MHz
1900MHz
15.2
13.9
15.4
15.4
15.4
Power output for multiple
received channels (Uplink) dBm
No. Tones
700MHz Band12/17
700MHz Band13
800MHz
1700MHz
1900MHz
2
23.0
23.9
20.4
22.4
22.1
3
19.5
20.4
16.9
18.9
18.6
4
17.0
17.9
14.4
16.4
16.1
5
15.0
15.9
12.4
14.4
14.1
6
13.5
14.4
10.9
12.9
12.6
Power output for multiple
received channels
(Downlinklink) dBm
No. Tones
Noise Figure
700MHz Band12/17
700MHz Band13
800MHz
2100MHz
1900MHz
2
16.1
15.2
15.3
12.0
15.3
3
12.6
11.7
11.8
8.5
11.8
4
10.1
9.2
9.3
6.0
9.3
5
8.1
7.2
7.3
4.0
7.3
6
6.6
5.7
5.8
2.5
5.8
5 dB nominal
Isolation
> 90 dB
Power Requirements
12V 3A
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be
adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter
incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster
is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency
band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that
band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1
minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster
has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity
are maintained by the Signal Booster’s microprocessor.
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple
carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is reradiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or
gain reduction and not by an attenuator at the output of the device.
14
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
____________
Notes
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
15
____________
Notes
16
IN-BUILDING SIGNAL BOOSTER
WILSON PRO 1000R
________
Warranty
30 DAY MONEY-BACK GUARANTEE
All WilsonPro products are protected by WilsonPro 30-day money-back guarantee.
If for any reason the performance of any product is not acceptable, simply return
the product directly to the reseller with a dated proof of purchase.
3 YEAR WARRANTY
WilsonPro Boosters are warranted for three (3) years against defects in
workmanship and/or materials. Warranty cases may be resolved by returning the
product directly to the reseller with a dated proof of purchase.
Signal Boosters may also be returned directly to the manufacturer at the
consumer’s expense, with a dated proof of purchase and a Returned Material
Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option,
either repair or replace the product.
This warranty does not apply to any Signal Boosters determined by WilsonPro
to have been subjected to misuse, abuse, neglect, or mishandling that alters or
damages physical or electronic properties.
RMA numbers may be obtained by contacting Customer Support.
DISCLAIMER: The information provided by WilsonPro is believed to be complete and
accurate. However, no responsibility is assumed by WilsonPro for any business or
personal losses arising from its use, or for any infringements of patents or other rights
of third parties that may result from its use.
NEED HELP?
support.wilsonpro.com
WILSON PRO 1000R IN-BUILDING SIGNAL BOOSTER
866.294.1660
17
A Wilson Electronics Brand
3301 East Deseret Drive, St. George, UT
www.wilsonpro.com | support.wilsonpro.com
Copyright © 2016 Wilson Electronics. All rights reserved.
Wilson Electronics products covered by U.S. patent(s) and pending application(s)
For patents go to: weboost.com/us/patents
NOT AFFILIATED WITH WILSON ANTENNA GDE000006_Rev01_01.19.17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement