First Generation Next Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Full Year ET70115C ET70115CR ET70215C ET70215CR Independent Circuit(s) 1 Switch SPDT Programming Events (minimum) 1,000 Astro (sunrise/sunset)** • • Pulse (momentary 1 to 127 sec.)** Interval (time of day)** • Interval (user selectable override)** Remote††† Holiday Programming (up to 99) • Holiday Duration (any length) • Auto Daylight Savings Adjustment • Lifetime Memory for Program Data • 8-Year Battery Backup Timekeeping • Isolated Logic Board/6,000V Transient Protection • Power Input 120/208/240/277 VAC 50/60Hz • Power Input 24 VAC 60 Hz (add “24” suffix) 20 Amps (general purpose) 12–277V† 20 Amps ballast 120–277V† 2/1 HP 240V† / HP 120V† 5 Amps Tungsten/TV 120–240V† 470VA Pilot Duty 12–240V† Lockable Steel Enclosure NEMA 1 1 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 2 SPDT 1,000 • • • Remote††† • • • • • • • 2 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R Next Generation 20 20 2/1 5 470VA NEMA 1 ET70415CR‡ ET70815CR‡ ET71615CR‡ 4 SPDT 1,000 • • • Remote†† • • • • • • • 20 20 2/1 5 470VA NEMA 3R 8 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 16 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R * Depends on data entry type **All circuits, independently programmable †Switch ratings per pole–normally open contacts †† Includes remote override for 4 circuits (up to 1,000 ft. away). To expand to max. # of circuits, order accessory #156ET9402A for ET70815CR or #156ET9403A for ET71615CR. ††† For remote override, order accessory #ET7232M (flush or raintight) or #ET7232M1 (surface mount). First Generation Independent Circuit(s) Switch Power Input Program Events 3-Year Battery Backup Amps HP 240V (Watts) HP 120V (Watts) Enclosure Water Heater EH10 EH40 1 SPST 120V 12 • 30 (3600) NEMA 1 1 DPST 240V 12 • 30 (7200) NEMA 1 Low Cost 24 Hour w/ 3R EP101CP3 EP104CP3 1 SPST 120V 8 • 30 2 1 NEMA 3R 1 DPST 240V 8 • 30 2 1 NEMA 3R 24 Hour ET100C ET101C ET102C ET103C ET104C ET105C 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120–277V 8 • 30 2 1 NEMA 1 1 DPST 120V 8 • 30 2 1 NEMA 1 1 DPST 120–277V 8 • 30 2 1 NEMA 1 1 SPDT 120V 8 • 30 2 1 NEMA 1 7 Day First Generation THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL Our first generation of electronic time switches provides dependable, to-the-minute control and reduced energy costs for a wide variety of basic applications. As a snap-in upgrade or for new installations, these models offer ease of programming and a 3-year battery backup, at a modest cost compared to mechanical time switches. STANDARD FEATURES • To-the-minute programming • Up to 28 set points • 3 year battery backup • Slide switch or push-button programming • 120, 240 or 277V input • 1 and 2 circuit models Independent Circuit(s) Switch Power Input Special Features Program Events* Battery Backup Amps HP 240V† HP 120V† Enclosure Inwall 7 Day/24 hr 7 Day with Features ET171C ET171CR E173C E174C ET175C ET279C 1 SPST 120V 1 DPST 240V 1 SPST 120V 1 DPST 120V 1 SPDT 120V 2 SPST 120V ET715C ET718C ET728C 1 SPST 120V Pulse Output 1 4PDT 120V 1 4PDT 120V ET799C ET716CK EI20 /EI40 1 2PST 120V SM Series Lighting Control Panels provide control for billboards or other lighting control applications. They include an electronic or mechanical time switch, a main disconnect and up to nine 20 Amp 120V breakers. One and two circuit models are available as are photo control, lightning arrestor and stainless enclosure options. Request Form # 300SM10001 for more information. CONTROL JUST ABOUT E V E RY T H I N G 1 DPDT 1 SP & 3 way 120/240/277V 12–277V Multi-Zone Soft Start Pulse Output Photo Sensor Prog./Countdown 20 20 20 20 20 20 28 28 28 28 3 yr 3 yr 3 yr 3 yr 3 yr 3 yr 5 yr 5 yr 5 yr 5 yr 30 30 30 30 30 30 5 5 5 5 2 2 2 2 2 2 1 1 1 1 1 1 NEMA 1 NEMA 3R NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 Lighting Control Panels ELECTRONIC TIME SWITCHES 28 5 yr 5 6/NA 3 yr 16 2 1 NEMA 1 wall mount Intermatic Incorporated Spring Grove, Illinois 60081-9698 www.intermatic.com www.energycontrols.com ©2002 Intermatic, Inc. Printed in U.S.A. 300ET10011 THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL The Next Generation design is the result of a collaboration of electrical contractors, engineers, distributors and product designers. . .backed by the control expertise of the world's leading time switch manufacturer. These microprocessor-controlled models offer the ultimate in control and application flexibility. New remote override and network connection options move the Next Generation even further ahead of the competition. www.intermatic.com/energycontrols STANDARD FEATURES • Daily, weekly or yearly scheduling • Fixed, astro, pulse and interval • Holiday programming (to 99 schedules) • Lifetime memory for program data • 8 year battery maintains timekeeping • 120, 208, 240 or 277V input • 1, 2, 4, 8 and 16 circuit models • Auto review for easy program review, with help messages for omissions. First Generation Next Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Full Year ET70115C ET70115CR ET70215C ET70215CR Independent Circuit(s) 1 Switch SPDT Programming Events (minimum) 1,000 Astro (sunrise/sunset)** • • Pulse (momentary 1 to 127 sec.)** Interval (time of day)** • Interval (user selectable override)** Remote††† Holiday Programming (up to 99) • Holiday Duration (any length) • Auto Daylight Savings Adjustment • Lifetime Memory for Program Data • 8-Year Battery Backup Timekeeping • Isolated Logic Board/6,000V Transient Protection • Power Input 120/208/240/277 VAC 50/60Hz • Power Input 24 VAC 60 Hz (add “24” suffix) 20 Amps (general purpose) 12–277V† 20 Amps ballast 120–277V† 2/1 HP 240V† / HP 120V† 5 Amps Tungsten/TV 120–240V† 470VA Pilot Duty 12–240V† Lockable Steel Enclosure NEMA 1 1 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 2 SPDT 1,000 • • • Remote††† • • • • • • • 2 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R Next Generation 20 20 2/1 5 470VA NEMA 1 ET70415CR‡ ET70815CR‡ ET71615CR‡ 4 SPDT 1,000 • • • Remote†† • • • • • • • 20 20 2/1 5 470VA NEMA 3R 8 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 16 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R * Depends on data entry type **All circuits, independently programmable †Switch ratings per pole–normally open contacts †† Includes remote override for 4 circuits (up to 1,000 ft. away). To expand to max. # of circuits, order accessory #156ET9402A for ET70815CR or #156ET9403A for ET71615CR. ††† For remote override, order accessory #ET7232M (flush or raintight) or #ET7232M1 (surface mount). First Generation Independent Circuit(s) Switch Power Input Program Events 3-Year Battery Backup Amps HP 240V (Watts) HP 120V (Watts) Enclosure Water Heater EH10 EH40 1 SPST 120V 12 • 30 (3600) NEMA 1 1 DPST 240V 12 • 30 (7200) NEMA 1 Low Cost 24 Hour w/ 3R EP101CP3 EP104CP3 1 SPST 120V 8 • 30 2 1 NEMA 3R 1 DPST 240V 8 • 30 2 1 NEMA 3R 24 Hour ET100C ET101C ET102C ET103C ET104C ET105C 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120–277V 8 • 30 2 1 NEMA 1 1 DPST 120V 8 • 30 2 1 NEMA 1 1 DPST 120–277V 8 • 30 2 1 NEMA 1 1 SPDT 120V 8 • 30 2 1 NEMA 1 7 Day First Generation THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL Our first generation of electronic time switches provides dependable, to-the-minute control and reduced energy costs for a wide variety of basic applications. As a snap-in upgrade or for new installations, these models offer ease of programming and a 3-year battery backup, at a modest cost compared to mechanical time switches. STANDARD FEATURES • To-the-minute programming • Up to 28 set points • 3 year battery backup • Slide switch or push-button programming • 120, 240 or 277V input • 1 and 2 circuit models Independent Circuit(s) Switch Power Input Special Features Program Events* Battery Backup Amps HP 240V† HP 120V† Enclosure Inwall 7 Day/24 hr 7 Day with Features ET171C ET171CR E173C E174C ET175C ET279C 1 SPST 120V 1 DPST 240V 1 SPST 120V 1 DPST 120V 1 SPDT 120V 2 SPST 120V ET715C ET718C ET728C 1 SPST 120V Pulse Output 1 4PDT 120V 1 4PDT 120V ET799C ET716CK EI20 /EI40 1 2PST 120V SM Series Lighting Control Panels provide control for billboards or other lighting control applications. They include an electronic or mechanical time switch, a main disconnect and up to nine 20 Amp 120V breakers. One and two circuit models are available as are photo control, lightning arrestor and stainless enclosure options. Request Form # 300SM10001 for more information. CONTROL JUST ABOUT E V E RY T H I N G 1 DPDT 1 SP & 3 way 120/240/277V 12–277V Multi-Zone Soft Start Pulse Output Photo Sensor Prog./Countdown 20 20 20 20 20 20 28 28 28 28 3 yr 3 yr 3 yr 3 yr 3 yr 3 yr 5 yr 5 yr 5 yr 5 yr 30 30 30 30 30 30 5 5 5 5 2 2 2 2 2 2 1 1 1 1 1 1 NEMA 1 NEMA 3R NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 Lighting Control Panels ELECTRONIC TIME SWITCHES 28 5 yr 5 6/NA 3 yr 16 2 1 NEMA 1 wall mount Intermatic Incorporated Spring Grove, Illinois 60081-9698 www.intermatic.com www.energycontrols.com ©2002 Intermatic, Inc. Printed in U.S.A. 300ET10011 THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL The Next Generation design is the result of a collaboration of electrical contractors, engineers, distributors and product designers. . .backed by the control expertise of the world's leading time switch manufacturer. These microprocessor-controlled models offer the ultimate in control and application flexibility. New remote override and network connection options move the Next Generation even further ahead of the competition. www.intermatic.com/energycontrols STANDARD FEATURES • Daily, weekly or yearly scheduling • Fixed, astro, pulse and interval • Holiday programming (to 99 schedules) • Lifetime memory for program data • 8 year battery maintains timekeeping • 120, 208, 240 or 277V input • 1, 2, 4, 8 and 16 circuit models • Auto review for easy program review, with help messages for omissions. First Generation Next Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Full Year ET70115C ET70115CR ET70215C ET70215CR Independent Circuit(s) 1 Switch SPDT Programming Events (minimum) 1,000 Astro (sunrise/sunset)** • • Pulse (momentary 1 to 127 sec.)** Interval (time of day)** • Interval (user selectable override)** Remote††† Holiday Programming (up to 99) • Holiday Duration (any length) • Auto Daylight Savings Adjustment • Lifetime Memory for Program Data • 8-Year Battery Backup Timekeeping • Isolated Logic Board/6,000V Transient Protection • Power Input 120/208/240/277 VAC 50/60Hz • Power Input 24 VAC 60 Hz (add “24” suffix) 20 Amps (general purpose) 12–277V† 20 Amps ballast 120–277V† 2/1 HP 240V† / HP 120V† 5 Amps Tungsten/TV 120–240V† 470VA Pilot Duty 12–240V† Lockable Steel Enclosure NEMA 1 1 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 2 SPDT 1,000 • • • Remote††† • • • • • • • 2 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R Next Generation 20 20 2/1 5 470VA NEMA 1 ET70415CR‡ ET70815CR‡ ET71615CR‡ 4 SPDT 1,000 • • • Remote†† • • • • • • • 20 20 2/1 5 470VA NEMA 3R 8 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 16 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R * Depends on data entry type **All circuits, independently programmable †Switch ratings per pole–normally open contacts †† Includes remote override for 4 circuits (up to 1,000 ft. away). To expand to max. # of circuits, order accessory #156ET9402A for ET70815CR or #156ET9403A for ET71615CR. ††† For remote override, order accessory #ET7232M (flush or raintight) or #ET7232M1 (surface mount). First Generation Independent Circuit(s) Switch Power Input Program Events 3-Year Battery Backup Amps HP 240V (Watts) HP 120V (Watts) Enclosure Water Heater EH10 EH40 1 SPST 120V 12 • 30 (3600) NEMA 1 1 DPST 240V 12 • 30 (7200) NEMA 1 Low Cost 24 Hour w/ 3R EP101CP3 EP104CP3 1 SPST 120V 8 • 30 2 1 NEMA 3R 1 DPST 240V 8 • 30 2 1 NEMA 3R 24 Hour ET100C ET101C ET102C ET103C ET104C ET105C 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120–277V 8 • 30 2 1 NEMA 1 1 DPST 120V 8 • 30 2 1 NEMA 1 1 DPST 120–277V 8 • 30 2 1 NEMA 1 1 SPDT 120V 8 • 30 2 1 NEMA 1 7 Day First Generation THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL Our first generation of electronic time switches provides dependable, to-the-minute control and reduced energy costs for a wide variety of basic applications. As a snap-in upgrade or for new installations, these models offer ease of programming and a 3-year battery backup, at a modest cost compared to mechanical time switches. STANDARD FEATURES • To-the-minute programming • Up to 28 set points • 3 year battery backup • Slide switch or push-button programming • 120, 240 or 277V input • 1 and 2 circuit models Independent Circuit(s) Switch Power Input Special Features Program Events* Battery Backup Amps HP 240V† HP 120V† Enclosure Inwall 7 Day/24 hr 7 Day with Features ET171C ET171CR E173C E174C ET175C ET279C 1 SPST 120V 1 DPST 240V 1 SPST 120V 1 DPST 120V 1 SPDT 120V 2 SPST 120V ET715C ET718C ET728C 1 SPST 120V Pulse Output 1 4PDT 120V 1 4PDT 120V ET799C ET716CK EI20 /EI40 1 2PST 120V SM Series Lighting Control Panels provide control for billboards or other lighting control applications. They include an electronic or mechanical time switch, a main disconnect and up to nine 20 Amp 120V breakers. One and two circuit models are available as are photo control, lightning arrestor and stainless enclosure options. Request Form # 300SM10001 for more information. CONTROL JUST ABOUT E V E RY T H I N G 1 DPDT 1 SP & 3 way 120/240/277V 12–277V Multi-Zone Soft Start Pulse Output Photo Sensor Prog./Countdown 20 20 20 20 20 20 28 28 28 28 3 yr 3 yr 3 yr 3 yr 3 yr 3 yr 5 yr 5 yr 5 yr 5 yr 30 30 30 30 30 30 5 5 5 5 2 2 2 2 2 2 1 1 1 1 1 1 NEMA 1 NEMA 3R NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 Lighting Control Panels ELECTRONIC TIME SWITCHES 28 5 yr 5 6/NA 3 yr 16 2 1 NEMA 1 wall mount Intermatic Incorporated Spring Grove, Illinois 60081-9698 www.intermatic.com www.energycontrols.com ©2002 Intermatic, Inc. Printed in U.S.A. 300ET10011 THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL The Next Generation design is the result of a collaboration of electrical contractors, engineers, distributors and product designers. . .backed by the control expertise of the world's leading time switch manufacturer. These microprocessor-controlled models offer the ultimate in control and application flexibility. New remote override and network connection options move the Next Generation even further ahead of the competition. www.intermatic.com/energycontrols STANDARD FEATURES • Daily, weekly or yearly scheduling • Fixed, astro, pulse and interval • Holiday programming (to 99 schedules) • Lifetime memory for program data • 8 year battery maintains timekeeping • 120, 208, 240 or 277V input • 1, 2, 4, 8 and 16 circuit models • Auto review for easy program review, with help messages for omissions. Next Generation First Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Factory Pre-Programming Pre-installation of your specific program requirements available on quantity orders of 50 + (ET70000CR Series.) EI20C ET279C * ET70215C & ET70215CR ET70115C & ET70115CR ET70415CR ET70815CR New Connectivity Features Full Year Water Heater 7 day ET100C SERIES EP100C SERIES EH10 / EH40 ET71615CR Low Cost 24hr. with 3R ET170C SERIES * 7 Day 24 Hour EI40C ET700C SERIES * 7 Day with Features In Wall Remote override for 1 and 2 circuit FOR CONTROLLING • Water heaters • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals • Process equipment • Poultry equipment • Livestock feeders NEMA 1 installation with surface mount junction box RS232 Interface NEMA 3R installation with flush or raintight junction box SPECIFICATIONS SPECIFICATIONS 1 or 2 circuit SPECIFICATIONS 4 circuit NEMA 3R enclosure option Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz SPDT contacts Remote override option CIRCUIT #1 CIRCUIT #2 TIMER POWER EQUIPMENT GROUND 1 2 3 4 5 6 7 8 NEUTRAL 277 VAC CLOSE HOT COM OPEN Latching Relay OUTDOOR LIGHTING 8 circuit Independent control Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V input 50/60 Hz Remote override E Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override SPECIFICATIONS REMOTE OVERRIDE FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS 16 circuit Allows for manual control of loads using remotely-located switches (up to 1,000 ft. from time switch). Uses interface hardware shown above. For 1 and 2 circuit. • Residential • Commercial, industrial, institutional and military facilities Up to 12 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz • Pools and spas • HVAC • Commercial ovens • Lighting Up to 8 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz Remote override capable • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps Up to 8 events 3 year alkaline backup 30 Amp rated 120, 120–277V 50/60 Hz SPST, SPDT, DPST contacts • HVAC • Lighting • Fans, blowers and pumps • Bells and signals Up to 20 events 1 or 2 circuit Pulse option 3 year alkaline backup 30 Amp rated 120 & 240V 50/60 Hz 2 SPST contacts • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals Up to 28 events Ni Cadmium rechargeable backup Pulse and photo sensor models 5 Amps rated for pilot duty SPST, DPST Contacts 120V 60 Hz • Bathroom fans • Whole house fans • Ceiling fans • Fluorescent lights • Heaters Countdown or 7 day programmable 3 year alkaline backup 120–277V 50/60 Hz 12–28 VDC Single pole, 3 or 4-way Junction box mounted Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override L1 L2 L3 277 VAC COM N.C. CIRCUIT 1 N.O. NEUTRAL N.O. COM N.O. COM CIRCUIT 6 N.O. COM N.C. #1 Neutral Hot Timer Power 1 2 120 VAC 3 Circuit #1 4 5 6 Circuit #2 7 Photo Control Black Red Relay Coil White Astronomic with photo control override 8 3 4 COM N.C. N.O. N.O. COM 5 #3 CIRCUIT 13 #6 EQUIPMENT GROUND CLOSE COM OPEN Latching Lighting Contactor 1 2 CIRCUIT #2 #7 COM N.C. N.O. 3 4 5 6 7 8 9 10 11 12 13 14 Control of latching contactor N.O. N.O. CIRCUIT 14 N.C. COM N.O. N.O. CIRCUIT 16 LINE 2 N.C. 277 240 208 120 LINE 1 LINE 2 TIMER POWER E 8 1 EQUIP M ENT GROUN D TM ER POW ER 120 VAC OUTDOOR LIGHTING INDOOR LIGHTING AC MOTOR E Multi-function controlling lights, HVAC and signal alarms NEUTRAL A A Multi-function controlling lights, HVAC and signal alarms Neutral H OT LINE 2 TIMER POWER 240 VAC Input INPUT VOLTAGE SELECTOR LINE 1 NEUTRAL USE 10 TO 16 GUAGE COPPER W IRE ONL Y H OT 1 Timer Power 2 3 LINE 1 Hot 4 5 6 LINE 2 WATER HTR. NEUTRAL Multi-function controlling lights, HVAC and signal alarms Single 240V water heater control 4 Neutral E Hot LOAD LINE 2 240 VAC Input LINE 1 Timer Power 1 2 3 LINE 1 Direct 240V load control Timer Power 1 2 4 3 E 1 LINE 2 Timer Power 2 240 VAC Input 4 LINE 1 120 VAC Input 5 LINE 2 LOAD 6 LINE 2 240 VAC Input LINE 1 3 LINE 1 Direct 240V load control 4 5 6 LINE 2 LOAD LOAD Timer Power 1 2 3 LINE 1 Direct 240V load control Direct 120V load control Direct 120V load control 4 5 6 Neutral 1 Timer Power 2 CIRCUIT 1 3 4 CIRCUIT 2 5 LOAD Hot Latching Relay 277 VAC LOAD Latching contactor control 3 4 LOAD rem iT rew oP 1 2 Direct 120V load control E 120 VAC Input Hot Timer Power 2 120 VAC Input 6 CLOSE COM OPEN LINE 2 1 Neutral Neutral 120 VAC Input Hot 1 Timer Power 2 CIRCUIT 1 3 4 5 6 Neutral 120 VAC Input Hot LOAD 1 LOAD 2 Dual load control on separate schedules Low Voltage Supply 4 5 4 5 55o F 6 7 8 40o F 73o F 24 VAC Zone # 1 9 10 11 12 13 60o F 60o F 24 VAC Zone # 2 14 7 8 10 11 120C VA tu p n I 24 VAC Zone # 3 M Mulitzone HVAC control O L CE S 65o F 24 VAC Zone # 4 d aoL Su pply 13 COM OP EN ctaLhign yaleR# 1 O L C SE COM ctaLhign yaleR# 2 O LD A 1 Latching contactor control O LD A 2 Timer Neutral Blue or Black Red (Cap and do not use.) Single pole wiring H Hot OP EN d aoL Su pply Black or Blue 14 120 V Su gr e Su pprseso r Typ. (4) toH 35o F 73o F Hot On slu Pe lartu eN Timer Power 1 2 3 CIRCUIT 2 Off slu Pe Black Timer Install Jumper Neutral Blue Red Common Load 3 way wiring For Hmore information go to T www.intermatic.com/energycontrols www.intermatic.com/energycontrols • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams 3 120 VAC Input For more information go to Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations Timer Power 1 2 Single 120V water heater control CIRCUIT 10 CIRCUIT 12 HOT HOT Outdoor Lighting COM N.C. N.C. 277 240 208 120 LINE 1 4 WATER HTR. N.C. COM N.C. COM INPUT VOLTAGE SELECTOR USE 10 TO 16 HOT TIMER GAUGE COPPER EQUIPMENT POWER NEUTRAL WIRE ONLY 120 VAC GROUND TO REMOTE SWITCH(S) NEUTRAL 277 VAC N.O. COM #8 Hot N.O. 120 VAC Neutral CIRCUIT 15 N.C. CIRCUIT #4 CIRCUIT #3 3 120 VAC Input N.C. COM N.C. N.O. COM N.O. N.O. CIRCUIT #1 TIMER POWER N.O. COM N.C. COM N.C. COM Neutral 120 VAC Hot Neutral Timer Power 2 N.C. COM N.C. CIRCUIT 9 N.O. CIRCUIT 11 1 CIRCUIT 8 N.O. COM TO REMOTE SWITCH(S) #4 N.O. N.O. COM #5 #2 N.C. COM N.C. Allows for easy input of complex programs via a graphical user interface on your PC. Uses interface hardware shown above. Coming soon. COM N.C. CIRCUIT 7 N.O. Circuit #1 CIRCUIT 4 N.C. COM N.C. CIRCUIT 5 N.O. Timer Power 1 2 CIRCUIT 2 N.C. COM N.C. CIRCUIT 3 N.O. Latching contactor with pulse output PC NETWORK CONNECTION C US *Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams D Next Generation First Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Factory Pre-Programming Pre-installation of your specific program requirements available on quantity orders of 50 + (ET70000CR Series.) EI20C ET279C * ET70215C & ET70215CR ET70115C & ET70115CR ET70415CR ET70815CR New Connectivity Features Full Year Water Heater 7 day ET100C SERIES EP100C SERIES EH10 / EH40 ET71615CR Low Cost 24hr. with 3R ET170C SERIES * 7 Day 24 Hour EI40C ET700C SERIES * 7 Day with Features In Wall Remote override for 1 and 2 circuit FOR CONTROLLING • Water heaters • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals • Process equipment • Poultry equipment • Livestock feeders NEMA 1 installation with surface mount junction box RS232 Interface NEMA 3R installation with flush or raintight junction box SPECIFICATIONS SPECIFICATIONS 1 or 2 circuit SPECIFICATIONS 4 circuit NEMA 3R enclosure option Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz SPDT contacts Remote override option CIRCUIT #1 CIRCUIT #2 TIMER POWER EQUIPMENT GROUND 1 2 3 4 5 6 7 8 NEUTRAL 277 VAC CLOSE HOT COM OPEN Latching Relay OUTDOOR LIGHTING 8 circuit Independent control Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V input 50/60 Hz Remote override E Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override SPECIFICATIONS REMOTE OVERRIDE FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS 16 circuit Allows for manual control of loads using remotely-located switches (up to 1,000 ft. from time switch). Uses interface hardware shown above. For 1 and 2 circuit. • Residential • Commercial, industrial, institutional and military facilities Up to 12 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz • Pools and spas • HVAC • Commercial ovens • Lighting Up to 8 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz Remote override capable • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps Up to 8 events 3 year alkaline backup 30 Amp rated 120, 120–277V 50/60 Hz SPST, SPDT, DPST contacts • HVAC • Lighting • Fans, blowers and pumps • Bells and signals Up to 20 events 1 or 2 circuit Pulse option 3 year alkaline backup 30 Amp rated 120 & 240V 50/60 Hz 2 SPST contacts • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals Up to 28 events Ni Cadmium rechargeable backup Pulse and photo sensor models 5 Amps rated for pilot duty SPST, DPST Contacts 120V 60 Hz • Bathroom fans • Whole house fans • Ceiling fans • Fluorescent lights • Heaters Countdown or 7 day programmable 3 year alkaline backup 120–277V 50/60 Hz 12–28 VDC Single pole, 3 or 4-way Junction box mounted Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override L1 L2 L3 277 VAC COM N.C. CIRCUIT 1 N.O. NEUTRAL N.O. COM N.O. COM CIRCUIT 6 N.O. COM N.C. #1 Neutral Hot Timer Power 1 2 120 VAC 3 Circuit #1 4 5 6 Circuit #2 7 Photo Control Black Red Relay Coil White Astronomic with photo control override 8 3 4 COM N.C. N.O. N.O. COM 5 #3 CIRCUIT 13 #6 EQUIPMENT GROUND CLOSE COM OPEN Latching Lighting Contactor 1 2 CIRCUIT #2 #7 COM N.C. N.O. 3 4 5 6 7 8 9 10 11 12 13 14 Control of latching contactor N.O. N.O. CIRCUIT 14 N.C. COM N.O. N.O. CIRCUIT 16 LINE 2 N.C. 277 240 208 120 LINE 1 LINE 2 TIMER POWER E 8 1 EQUIP M ENT GROUN D TM ER POW ER 120 VAC OUTDOOR LIGHTING INDOOR LIGHTING AC MOTOR E Multi-function controlling lights, HVAC and signal alarms NEUTRAL A A Multi-function controlling lights, HVAC and signal alarms Neutral H OT LINE 2 TIMER POWER 240 VAC Input INPUT VOLTAGE SELECTOR LINE 1 NEUTRAL USE 10 TO 16 GUAGE COPPER W IRE ONL Y H OT 1 Timer Power 2 3 LINE 1 Hot 4 5 6 LINE 2 WATER HTR. NEUTRAL Multi-function controlling lights, HVAC and signal alarms Single 240V water heater control 4 Neutral E Hot LOAD LINE 2 240 VAC Input LINE 1 Timer Power 1 2 3 LINE 1 Direct 240V load control Timer Power 1 2 4 3 E 1 LINE 2 Timer Power 2 240 VAC Input 4 LINE 1 120 VAC Input 5 LINE 2 LOAD 6 LINE 2 240 VAC Input LINE 1 3 LINE 1 Direct 240V load control 4 5 6 LINE 2 LOAD LOAD Timer Power 1 2 3 LINE 1 Direct 240V load control Direct 120V load control Direct 120V load control 4 5 6 Neutral 1 Timer Power 2 CIRCUIT 1 3 4 CIRCUIT 2 5 LOAD Hot Latching Relay 277 VAC LOAD Latching contactor control 3 4 LOAD rem iT rew oP 1 2 Direct 120V load control E 120 VAC Input Hot Timer Power 2 120 VAC Input 6 CLOSE COM OPEN LINE 2 1 Neutral Neutral 120 VAC Input Hot 1 Timer Power 2 CIRCUIT 1 3 4 5 6 Neutral 120 VAC Input Hot LOAD 1 LOAD 2 Dual load control on separate schedules Low Voltage Supply 4 5 4 5 55o F 6 7 8 40o F 73o F 24 VAC Zone # 1 9 10 11 12 13 60o F 60o F 24 VAC Zone # 2 14 7 8 10 11 120C VA tu p n I 24 VAC Zone # 3 M Mulitzone HVAC control O L CE S 65o F 24 VAC Zone # 4 d aoL Su pply 13 COM OP EN ctaLhign yaleR# 1 O L C SE COM ctaLhign yaleR# 2 O LD A 1 Latching contactor control O LD A 2 Timer Neutral Blue or Black Red (Cap and do not use.) Single pole wiring H Hot OP EN d aoL Su pply Black or Blue 14 120 V Su gr e Su pprseso r Typ. (4) toH 35o F 73o F Hot On slu Pe lartu eN Timer Power 1 2 3 CIRCUIT 2 Off slu Pe Black Timer Install Jumper Neutral Blue Red Common Load 3 way wiring For Hmore information go to T www.intermatic.com/energycontrols www.intermatic.com/energycontrols • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams 3 120 VAC Input For more information go to Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations Timer Power 1 2 Single 120V water heater control CIRCUIT 10 CIRCUIT 12 HOT HOT Outdoor Lighting COM N.C. N.C. 277 240 208 120 LINE 1 4 WATER HTR. N.C. COM N.C. COM INPUT VOLTAGE SELECTOR USE 10 TO 16 HOT TIMER GAUGE COPPER EQUIPMENT POWER NEUTRAL WIRE ONLY 120 VAC GROUND TO REMOTE SWITCH(S) NEUTRAL 277 VAC N.O. COM #8 Hot N.O. 120 VAC Neutral CIRCUIT 15 N.C. CIRCUIT #4 CIRCUIT #3 3 120 VAC Input N.C. COM N.C. N.O. COM N.O. N.O. CIRCUIT #1 TIMER POWER N.O. COM N.C. COM N.C. COM Neutral 120 VAC Hot Neutral Timer Power 2 N.C. COM N.C. CIRCUIT 9 N.O. CIRCUIT 11 1 CIRCUIT 8 N.O. COM TO REMOTE SWITCH(S) #4 N.O. N.O. COM #5 #2 N.C. COM N.C. Allows for easy input of complex programs via a graphical user interface on your PC. Uses interface hardware shown above. Coming soon. COM N.C. CIRCUIT 7 N.O. Circuit #1 CIRCUIT 4 N.C. COM N.C. CIRCUIT 5 N.O. Timer Power 1 2 CIRCUIT 2 N.C. COM N.C. CIRCUIT 3 N.O. Latching contactor with pulse output PC NETWORK CONNECTION C US *Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams D Next Generation First Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Factory Pre-Programming Pre-installation of your specific program requirements available on quantity orders of 50 + (ET70000CR Series.) EI20C ET279C * ET70215C & ET70215CR ET70115C & ET70115CR ET70415CR ET70815CR New Connectivity Features Full Year Water Heater 7 day ET100C SERIES EP100C SERIES EH10 / EH40 ET71615CR Low Cost 24hr. with 3R ET170C SERIES * 7 Day 24 Hour EI40C ET700C SERIES * 7 Day with Features In Wall Remote override for 1 and 2 circuit FOR CONTROLLING • Water heaters • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals • Process equipment • Poultry equipment • Livestock feeders NEMA 1 installation with surface mount junction box RS232 Interface NEMA 3R installation with flush or raintight junction box SPECIFICATIONS SPECIFICATIONS 1 or 2 circuit SPECIFICATIONS 4 circuit NEMA 3R enclosure option Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz SPDT contacts Remote override option CIRCUIT #1 CIRCUIT #2 TIMER POWER EQUIPMENT GROUND 1 2 3 4 5 6 7 8 NEUTRAL 277 VAC CLOSE HOT COM OPEN Latching Relay OUTDOOR LIGHTING 8 circuit Independent control Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V input 50/60 Hz Remote override E Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override SPECIFICATIONS REMOTE OVERRIDE FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS 16 circuit Allows for manual control of loads using remotely-located switches (up to 1,000 ft. from time switch). Uses interface hardware shown above. For 1 and 2 circuit. • Residential • Commercial, industrial, institutional and military facilities Up to 12 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz • Pools and spas • HVAC • Commercial ovens • Lighting Up to 8 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz Remote override capable • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps Up to 8 events 3 year alkaline backup 30 Amp rated 120, 120–277V 50/60 Hz SPST, SPDT, DPST contacts • HVAC • Lighting • Fans, blowers and pumps • Bells and signals Up to 20 events 1 or 2 circuit Pulse option 3 year alkaline backup 30 Amp rated 120 & 240V 50/60 Hz 2 SPST contacts • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals Up to 28 events Ni Cadmium rechargeable backup Pulse and photo sensor models 5 Amps rated for pilot duty SPST, DPST Contacts 120V 60 Hz • Bathroom fans • Whole house fans • Ceiling fans • Fluorescent lights • Heaters Countdown or 7 day programmable 3 year alkaline backup 120–277V 50/60 Hz 12–28 VDC Single pole, 3 or 4-way Junction box mounted Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override L1 L2 L3 277 VAC COM N.C. CIRCUIT 1 N.O. NEUTRAL N.O. COM N.O. COM CIRCUIT 6 N.O. COM N.C. #1 Neutral Hot Timer Power 1 2 120 VAC 3 Circuit #1 4 5 6 Circuit #2 7 Photo Control Black Red Relay Coil White Astronomic with photo control override 8 3 4 COM N.C. N.O. N.O. COM 5 #3 CIRCUIT 13 #6 EQUIPMENT GROUND CLOSE COM OPEN Latching Lighting Contactor 1 2 CIRCUIT #2 #7 COM N.C. N.O. 3 4 5 6 7 8 9 10 11 12 13 14 Control of latching contactor N.O. N.O. CIRCUIT 14 N.C. COM N.O. N.O. CIRCUIT 16 LINE 2 N.C. 277 240 208 120 LINE 1 LINE 2 TIMER POWER E 8 1 EQUIP M ENT GROUN D TM ER POW ER 120 VAC OUTDOOR LIGHTING INDOOR LIGHTING AC MOTOR E Multi-function controlling lights, HVAC and signal alarms NEUTRAL A A Multi-function controlling lights, HVAC and signal alarms Neutral H OT LINE 2 TIMER POWER 240 VAC Input INPUT VOLTAGE SELECTOR LINE 1 NEUTRAL USE 10 TO 16 GUAGE COPPER W IRE ONL Y H OT 1 Timer Power 2 3 LINE 1 Hot 4 5 6 LINE 2 WATER HTR. NEUTRAL Multi-function controlling lights, HVAC and signal alarms Single 240V water heater control 4 Neutral E Hot LOAD LINE 2 240 VAC Input LINE 1 Timer Power 1 2 3 LINE 1 Direct 240V load control Timer Power 1 2 4 3 E 1 LINE 2 Timer Power 2 240 VAC Input 4 LINE 1 120 VAC Input 5 LINE 2 LOAD 6 LINE 2 240 VAC Input LINE 1 3 LINE 1 Direct 240V load control 4 5 6 LINE 2 LOAD LOAD Timer Power 1 2 3 LINE 1 Direct 240V load control Direct 120V load control Direct 120V load control 4 5 6 Neutral 1 Timer Power 2 CIRCUIT 1 3 4 CIRCUIT 2 5 LOAD Hot Latching Relay 277 VAC LOAD Latching contactor control 3 4 LOAD rem iT rew oP 1 2 Direct 120V load control E 120 VAC Input Hot Timer Power 2 120 VAC Input 6 CLOSE COM OPEN LINE 2 1 Neutral Neutral 120 VAC Input Hot 1 Timer Power 2 CIRCUIT 1 3 4 5 6 Neutral 120 VAC Input Hot LOAD 1 LOAD 2 Dual load control on separate schedules Low Voltage Supply 4 5 4 5 55o F 6 7 8 40o F 73o F 24 VAC Zone # 1 9 10 11 12 13 60o F 60o F 24 VAC Zone # 2 14 7 8 10 11 120C VA tu p n I 24 VAC Zone # 3 M Mulitzone HVAC control O L CE S 65o F 24 VAC Zone # 4 d aoL Su pply 13 COM OP EN ctaLhign yaleR# 1 O L C SE COM ctaLhign yaleR# 2 O LD A 1 Latching contactor control O LD A 2 Timer Neutral Blue or Black Red (Cap and do not use.) Single pole wiring H Hot OP EN d aoL Su pply Black or Blue 14 120 V Su gr e Su pprseso r Typ. (4) toH 35o F 73o F Hot On slu Pe lartu eN Timer Power 1 2 3 CIRCUIT 2 Off slu Pe Black Timer Install Jumper Neutral Blue Red Common Load 3 way wiring For Hmore information go to T www.intermatic.com/energycontrols www.intermatic.com/energycontrols • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams 3 120 VAC Input For more information go to Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations Timer Power 1 2 Single 120V water heater control CIRCUIT 10 CIRCUIT 12 HOT HOT Outdoor Lighting COM N.C. N.C. 277 240 208 120 LINE 1 4 WATER HTR. N.C. COM N.C. COM INPUT VOLTAGE SELECTOR USE 10 TO 16 HOT TIMER GAUGE COPPER EQUIPMENT POWER NEUTRAL WIRE ONLY 120 VAC GROUND TO REMOTE SWITCH(S) NEUTRAL 277 VAC N.O. COM #8 Hot N.O. 120 VAC Neutral CIRCUIT 15 N.C. CIRCUIT #4 CIRCUIT #3 3 120 VAC Input N.C. COM N.C. N.O. COM N.O. N.O. CIRCUIT #1 TIMER POWER N.O. COM N.C. COM N.C. COM Neutral 120 VAC Hot Neutral Timer Power 2 N.C. COM N.C. CIRCUIT 9 N.O. CIRCUIT 11 1 CIRCUIT 8 N.O. COM TO REMOTE SWITCH(S) #4 N.O. N.O. COM #5 #2 N.C. COM N.C. Allows for easy input of complex programs via a graphical user interface on your PC. Uses interface hardware shown above. Coming soon. COM N.C. CIRCUIT 7 N.O. Circuit #1 CIRCUIT 4 N.C. COM N.C. CIRCUIT 5 N.O. Timer Power 1 2 CIRCUIT 2 N.C. COM N.C. CIRCUIT 3 N.O. Latching contactor with pulse output PC NETWORK CONNECTION C US *Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams D Next Generation First Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Factory Pre-Programming Pre-installation of your specific program requirements available on quantity orders of 50 + (ET70000CR Series.) EI20C ET279C * ET70215C & ET70215CR ET70115C & ET70115CR ET70415CR ET70815CR New Connectivity Features Full Year Water Heater 7 day ET100C SERIES EP100C SERIES EH10 / EH40 ET71615CR Low Cost 24hr. with 3R ET170C SERIES * 7 Day 24 Hour EI40C ET700C SERIES * 7 Day with Features In Wall Remote override for 1 and 2 circuit FOR CONTROLLING • Water heaters • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals • Process equipment • Poultry equipment • Livestock feeders NEMA 1 installation with surface mount junction box RS232 Interface NEMA 3R installation with flush or raintight junction box SPECIFICATIONS SPECIFICATIONS 1 or 2 circuit SPECIFICATIONS 4 circuit NEMA 3R enclosure option Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz SPDT contacts Remote override option CIRCUIT #1 CIRCUIT #2 TIMER POWER EQUIPMENT GROUND 1 2 3 4 5 6 7 8 NEUTRAL 277 VAC CLOSE HOT COM OPEN Latching Relay OUTDOOR LIGHTING 8 circuit Independent control Lifetime memory with 1,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V input 50/60 Hz Remote override E Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override SPECIFICATIONS REMOTE OVERRIDE FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS FOR CONTROLLING SPECIFICATIONS 16 circuit Allows for manual control of loads using remotely-located switches (up to 1,000 ft. from time switch). Uses interface hardware shown above. For 1 and 2 circuit. • Residential • Commercial, industrial, institutional and military facilities Up to 12 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz • Pools and spas • HVAC • Commercial ovens • Lighting Up to 8 events 3 year alkaline backup 3,600 Watts @ 120V 7,200 Watts @ 240V 120–240V 50/60 Hz Remote override capable • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps Up to 8 events 3 year alkaline backup 30 Amp rated 120, 120–277V 50/60 Hz SPST, SPDT, DPST contacts • HVAC • Lighting • Fans, blowers and pumps • Bells and signals Up to 20 events 1 or 2 circuit Pulse option 3 year alkaline backup 30 Amp rated 120 & 240V 50/60 Hz 2 SPST contacts • HVAC • Commercial ovens • Lighting • Fans, blowers and pumps • Bells and signals Up to 28 events Ni Cadmium rechargeable backup Pulse and photo sensor models 5 Amps rated for pilot duty SPST, DPST Contacts 120V 60 Hz • Bathroom fans • Whole house fans • Ceiling fans • Fluorescent lights • Heaters Countdown or 7 day programmable 3 year alkaline backup 120–277V 50/60 Hz 12–28 VDC Single pole, 3 or 4-way Junction box mounted Independent control Lifetime memory with 4,000+ events Astronomic or pulse programming 20 Amp ballast @ 120–277V 120–277V 50/60 Hz Remote override L1 L2 L3 277 VAC COM N.C. CIRCUIT 1 N.O. NEUTRAL N.O. COM N.O. COM CIRCUIT 6 N.O. COM N.C. #1 Neutral Hot Timer Power 1 2 120 VAC 3 Circuit #1 4 5 6 Circuit #2 7 Photo Control Black Red Relay Coil White Astronomic with photo control override 8 3 4 COM N.C. N.O. N.O. COM 5 #3 CIRCUIT 13 #6 EQUIPMENT GROUND CLOSE COM OPEN Latching Lighting Contactor 1 2 CIRCUIT #2 #7 COM N.C. N.O. 3 4 5 6 7 8 9 10 11 12 13 14 Control of latching contactor N.O. N.O. CIRCUIT 14 N.C. COM N.O. N.O. CIRCUIT 16 LINE 2 N.C. 277 240 208 120 LINE 1 LINE 2 TIMER POWER E 8 1 EQUIP M ENT GROUN D TM ER POW ER 120 VAC OUTDOOR LIGHTING INDOOR LIGHTING AC MOTOR E Multi-function controlling lights, HVAC and signal alarms NEUTRAL A A Multi-function controlling lights, HVAC and signal alarms Neutral H OT LINE 2 TIMER POWER 240 VAC Input INPUT VOLTAGE SELECTOR LINE 1 NEUTRAL USE 10 TO 16 GUAGE COPPER W IRE ONL Y H OT 1 Timer Power 2 3 LINE 1 Hot 4 5 6 LINE 2 WATER HTR. NEUTRAL Multi-function controlling lights, HVAC and signal alarms Single 240V water heater control 4 Neutral E Hot LOAD LINE 2 240 VAC Input LINE 1 Timer Power 1 2 3 LINE 1 Direct 240V load control Timer Power 1 2 4 3 E 1 LINE 2 Timer Power 2 240 VAC Input 4 LINE 1 120 VAC Input 5 LINE 2 LOAD 6 LINE 2 240 VAC Input LINE 1 3 LINE 1 Direct 240V load control 4 5 6 LINE 2 LOAD LOAD Timer Power 1 2 3 LINE 1 Direct 240V load control Direct 120V load control Direct 120V load control 4 5 6 Neutral 1 Timer Power 2 CIRCUIT 1 3 4 CIRCUIT 2 5 LOAD Hot Latching Relay 277 VAC LOAD Latching contactor control 3 4 LOAD rem iT rew oP 1 2 Direct 120V load control E 120 VAC Input Hot Timer Power 2 120 VAC Input 6 CLOSE COM OPEN LINE 2 1 Neutral Neutral 120 VAC Input Hot 1 Timer Power 2 CIRCUIT 1 3 4 5 6 Neutral 120 VAC Input Hot LOAD 1 LOAD 2 Dual load control on separate schedules Low Voltage Supply 4 5 4 5 55o F 6 7 8 40o F 73o F 24 VAC Zone # 1 9 10 11 12 13 60o F 60o F 24 VAC Zone # 2 14 7 8 10 11 120C VA tu p n I 24 VAC Zone # 3 M Mulitzone HVAC control O L CE S 65o F 24 VAC Zone # 4 d aoL Su pply 13 COM OP EN ctaLhign yaleR# 1 O L C SE COM ctaLhign yaleR# 2 O LD A 1 Latching contactor control O LD A 2 Timer Neutral Blue or Black Red (Cap and do not use.) Single pole wiring H Hot OP EN d aoL Su pply Black or Blue 14 120 V Su gr e Su pprseso r Typ. (4) toH 35o F 73o F Hot On slu Pe lartu eN Timer Power 1 2 3 CIRCUIT 2 Off slu Pe Black Timer Install Jumper Neutral Blue Red Common Load 3 way wiring For Hmore information go to T www.intermatic.com/energycontrols www.intermatic.com/energycontrols • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams 3 120 VAC Input For more information go to Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations Timer Power 1 2 Single 120V water heater control CIRCUIT 10 CIRCUIT 12 HOT HOT Outdoor Lighting COM N.C. N.C. 277 240 208 120 LINE 1 4 WATER HTR. N.C. COM N.C. COM INPUT VOLTAGE SELECTOR USE 10 TO 16 HOT TIMER GAUGE COPPER EQUIPMENT POWER NEUTRAL WIRE ONLY 120 VAC GROUND TO REMOTE SWITCH(S) NEUTRAL 277 VAC N.O. COM #8 Hot N.O. 120 VAC Neutral CIRCUIT 15 N.C. CIRCUIT #4 CIRCUIT #3 3 120 VAC Input N.C. COM N.C. N.O. COM N.O. N.O. CIRCUIT #1 TIMER POWER N.O. COM N.C. COM N.C. COM Neutral 120 VAC Hot Neutral Timer Power 2 N.C. COM N.C. CIRCUIT 9 N.O. CIRCUIT 11 1 CIRCUIT 8 N.O. COM TO REMOTE SWITCH(S) #4 N.O. N.O. COM #5 #2 N.C. COM N.C. Allows for easy input of complex programs via a graphical user interface on your PC. Uses interface hardware shown above. Coming soon. COM N.C. CIRCUIT 7 N.O. Circuit #1 CIRCUIT 4 N.C. COM N.C. CIRCUIT 5 N.O. Timer Power 1 2 CIRCUIT 2 N.C. COM N.C. CIRCUIT 3 N.O. Latching contactor with pulse output PC NETWORK CONNECTION C US *Certified under Title 24, Part 6, Section 131(D) of the California Code of Regulations • Copy & paste specifier text • Competitive comparisons • Downloadable programming help and wiring diagrams D First Generation Next Generation ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES ELECTRONIC TIME SWITCHES Full Year ET70115C ET70115CR ET70215C ET70215CR Independent Circuit(s) 1 Switch SPDT Programming Events (minimum) 1,000 Astro (sunrise/sunset)** • • Pulse (momentary 1 to 127 sec.)** Interval (time of day)** • Interval (user selectable override)** Remote††† Holiday Programming (up to 99) • Holiday Duration (any length) • Auto Daylight Savings Adjustment • Lifetime Memory for Program Data • 8-Year Battery Backup Timekeeping • Isolated Logic Board/6,000V Transient Protection • Power Input 120/208/240/277 VAC 50/60Hz • Power Input 24 VAC 60 Hz (add “24” suffix) 20 Amps (general purpose) 12–277V† 20 Amps ballast 120–277V† 2/1 HP 240V† / HP 120V† 5 Amps Tungsten/TV 120–240V† 470VA Pilot Duty 12–240V† Lockable Steel Enclosure NEMA 1 1 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 2 SPDT 1,000 • • • Remote††† • • • • • • • 2 SPDT 1,000 • • • Remote††† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R Next Generation 20 20 2/1 5 470VA NEMA 1 ET70415CR‡ ET70815CR‡ ET71615CR‡ 4 SPDT 1,000 • • • Remote†† • • • • • • • 20 20 2/1 5 470VA NEMA 3R 8 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R 16 SPDT 4,000 • • • Remote†† • • • • • • • • 20 20 2/1 5 470VA NEMA 3R * Depends on data entry type **All circuits, independently programmable †Switch ratings per pole–normally open contacts †† Includes remote override for 4 circuits (up to 1,000 ft. away). To expand to max. # of circuits, order accessory #156ET9402A for ET70815CR or #156ET9403A for ET71615CR. ††† For remote override, order accessory #ET7232M (flush or raintight) or #ET7232M1 (surface mount). First Generation Independent Circuit(s) Switch Power Input Program Events 3-Year Battery Backup Amps HP 240V (Watts) HP 120V (Watts) Enclosure Water Heater EH10 EH40 1 SPST 120V 12 • 30 (3600) NEMA 1 1 DPST 240V 12 • 30 (7200) NEMA 1 Low Cost 24 Hour w/ 3R EP101CP3 EP104CP3 1 SPST 120V 8 • 30 2 1 NEMA 3R 1 DPST 240V 8 • 30 2 1 NEMA 3R 24 Hour ET100C ET101C ET102C ET103C ET104C ET105C 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120V 8 • 30 2 1 NEMA 1 1 SPST 120–277V 8 • 30 2 1 NEMA 1 1 DPST 120V 8 • 30 2 1 NEMA 1 1 DPST 120–277V 8 • 30 2 1 NEMA 1 1 SPDT 120V 8 • 30 2 1 NEMA 1 7 Day First Generation THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL Our first generation of electronic time switches provides dependable, to-the-minute control and reduced energy costs for a wide variety of basic applications. As a snap-in upgrade or for new installations, these models offer ease of programming and a 3-year battery backup, at a modest cost compared to mechanical time switches. STANDARD FEATURES • To-the-minute programming • Up to 28 set points • 3 year battery backup • Slide switch or push-button programming • 120, 240 or 277V input • 1 and 2 circuit models Independent Circuit(s) Switch Power Input Special Features Program Events* Battery Backup Amps HP 240V† HP 120V† Enclosure Inwall 7 Day/24 hr 7 Day with Features ET171C ET171CR E173C E174C ET175C ET279C 1 SPST 120V 1 DPST 240V 1 SPST 120V 1 DPST 120V 1 SPDT 120V 2 SPST 120V ET715C ET718C ET728C 1 SPST 120V Pulse Output 1 4PDT 120V 1 4PDT 120V ET799C ET716CK EI20 /EI40 1 2PST 120V SM Series Lighting Control Panels provide control for billboards or other lighting control applications. They include an electronic or mechanical time switch, a main disconnect and up to nine 20 Amp 120V breakers. One and two circuit models are available as are photo control, lightning arrestor and stainless enclosure options. Request Form # 300SM10001 for more information. CONTROL JUST ABOUT E V E RY T H I N G 1 DPDT 1 SP & 3 way 120/240/277V 12–277V Multi-Zone Soft Start Pulse Output Photo Sensor Prog./Countdown 20 20 20 20 20 20 28 28 28 28 3 yr 3 yr 3 yr 3 yr 3 yr 3 yr 5 yr 5 yr 5 yr 5 yr 30 30 30 30 30 30 5 5 5 5 2 2 2 2 2 2 1 1 1 1 1 1 NEMA 1 NEMA 3R NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 Lighting Control Panels ELECTRONIC TIME SWITCHES 28 5 yr 5 6/NA 3 yr 16 2 1 NEMA 1 wall mount Intermatic Incorporated Spring Grove, Illinois 60081-9698 www.intermatic.com www.energycontrols.com ©2002 Intermatic, Inc. Printed in U.S.A. 300ET10011 THE ULTIMATE IN APPLICATION-SPECIFIC CONTROL The Next Generation design is the result of a collaboration of electrical contractors, engineers, distributors and product designers. . .backed by the control expertise of the world's leading time switch manufacturer. These microprocessor-controlled models offer the ultimate in control and application flexibility. New remote override and network connection options move the Next Generation even further ahead of the competition. www.intermatic.com/energycontrols STANDARD FEATURES • Daily, weekly or yearly scheduling • Fixed, astro, pulse and interval • Holiday programming (to 99 schedules) • Lifetime memory for program data • 8 year battery maintains timekeeping • 120, 208, 240 or 277V input • 1, 2, 4, 8 and 16 circuit models • Auto review for easy program review, with help messages for omissions.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021