Operating instructions CLARION VX709E
You can read the recommendations in the user guide, the technical guide or the installation guide for CLARION VX709E. You'll
find the answers to all your questions on the CLARION VX709E in the user manual (information, specifications, safety advice,
size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual CLARION VX709E
User guide CLARION VX709E
Operating instructions CLARION VX709E
Instructions for use CLARION VX709E
Instruction manual CLARION VX709E
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
Manual abstract:
OBS! Apparaten innehller laserkomponenten som avger laserstrlning verstigande grnsen fr laserklass 1. VAROITUS Suojakoteloa si saa avata. Laite sislt
laserdiodin, joka lhett nkymtnt silmille vaarallista lasersteily. Thank you for purchasing the Clarion VX709E. Please read this owner's manual thoroughly
before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed
warranty card and keep it carefully with this manual. English Contents 1.
FEATURES .....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 2 Expanding Systems....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
2 Playable discs ..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. 3 DVD video features ...
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
...... 4 2. PRECAUTIONS ...
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 5 Operation panel/Generalities....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 6 Cleaning ....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.. 6 About the registered marks, etc. ..
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. 7 3. CONTROLS ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
........ 8 Functions of Buttons..
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
. 8 Outline of Button and Touchkey Operation .........
..........
.....
.....
..........
..........
.....
.....
....... 10 Remote Control Unit ...
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
........ 16 4. BASIC OPERATIONS.
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.. 18 Turning On and Off the Power ...
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. 18 Adjusting the Volume ...
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
. 18 Opening the operation panel and adjusting the angle .........
..........
.....
.....
..........
..........
. 18 Turning the Audio OFF ....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
... 19 Turning the Monitor OFF ..
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.. 19 Setting/Ejecting a Disc ........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
......... 20 Connecting/Disconnecting an USB Media Device.
..........
.....
.....
..........
..........
.....
.....
..... 22 Selecting a Media Source .....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
....... 24 2Zone Function ...
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
25 5. SOURCE OPERATIONS ....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.... 26 Radio Operations .
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.... 26 DVD Video Operations ......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
. 31 Audio CD Operations ....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
38 MP3/WMA/AAC Operations ..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.... 40 DivX Operations .
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 43 6. SOURCE OPERATIONS (ACCESSORIES)...
.....
.....
..........
..........
.....
.....
..........
..........
. 45 iPod Operations....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
......... 45 USB Memory Operations.
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
... 49 Bluetooth Audio Player Operations .......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
. 50 Bluetooth Telephone Operations.........
..........
.....
.....
..........
..........
.....
.....
..........
..........
... 52 Navigation System Operations ..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
........ 57 AUX Operations ..
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... 58 7. SYSTEM SETTINGS....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 59 Audio Settings ....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
...... 59 General Settings....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
... 62 Adjusting the Monitor..
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
... 65 8. TROUBLESHOOTING ......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
. 66 9. ERROR DISPLAYS........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.... 68 10.
SPECIFICATIONS .....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ 70 INSTALLATION AND WIRE CONNECTION MANUAL ..
..........
.....
.....
..........
..........
.....
.... 71 Owner's manual VX709E 1 1.
FEATURES English Owner's manual Built in Bluetooth Handsfree (HFP & OPP) and Audio Streaming (A2DP & AVRCP) USB Direct Connection for iPod
NAX983HD (CeNET HDD Navigation) and NP509E (Hide-away Navigation) Control with Touch Panel Expanding Systems Expanding audio features
Expanding visual features Rear Vision Camera (CC2011E/CAA185) Rear Monitor 4-Channel Amplifier iPod VTR etc. Bluetooth Telephone USB Memory
Bluetooth Audio Player NP509E Note: The items listed outside of the frames are the commercial products generally sold.
NAX983HD/NAX973HD/NAX963HD Expanding navigation features 2 VX709E Playable discs This DVD player can play the following discs: Playable discs
English Owner's manual DVD video discs Audio CDs CD TEXT In addition, the DVD player can play CD-R/RW, DVD-R/RW, and DVD+R/RW discs on
which the following media files have been recorded: Playable media files MP3 ID3 TAG WMA AAC DivX For detailed information, see the sections entitled
"MP3/WMA/AAC Operations" (page 40) and "DivX Operations" (page 43). About CD Extra discs A CD Extra disc is a disc in which a total of two sessions
have been recorded. The first session is Audio session and the second session is Data session. Your personally-created CDs with more than second data
sessions recorded cannot be played on this DVD player. Note: When you play a CD Extra disc, only the first session will be recognized. Discs that cannot be
played back This player cannot play DVD Audio, DVD-RAM, Video CDs, Photo CDs, etc. Note: It may not be possible to play back discs recorded on some
CD/DVD drive units. (Cause: disc characteristics, cracks, dust/dirt, dust/dirt on player's lens, etc.
) If a CD-R/RW, DVD-R/RW, or DVD+R/RW disc that has not been finalized is played, it will take a long time to start playing. Also, it may not be possible to
play depending on its recording conditions. You cannot play Super Audio CDs. Playback of the CD player is not supported even if it is a hybrid disc. About
playing a CD-R/RW disc This player can play CD-R/RW discs previously recorded in Audio CD format or format with MP3/ WMA/AAC/DivX files. About
playing a DVD-R/RW or DVD+R/RW disc This player can play DVD-R/RW and DVD+R/RW discs previously recorded in DVD video format or format with
MP3/WMA/AAC/DivX files. Note on region numbers of DVD video discs The DVD video system assigns a region number to DVD players and DVD discs by
sales area. The DVD video region number playable in this system is marked on the disc jacket as shown below. ALL 2 2 4 6 VX709E 3 DVD video features
This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Note: The functions described in this section
differ depending on the DVD video disc.
Refer to the instructions provided with the DVD video. Some disc functions may operate differently from described in this manual. English Owner's manual
Multi-story function When a DVD video contains more than one story for a film, you can select the story you wish to enjoy. The operation procedures vary
with the disc; observe the instructions for selecting a story provided during playback. DVD menu DVD Menus can be called up during DVD video playback to
perform menu setting.
Example showing DVD menu Multi-sound function DVD video can store up to 8 languages for one film; select the language of your preference. The
languages stored on the disc are indicated by the icon shown below. Multi-angle function A DVD video that is filmed from multiple angles allows you to select
the angle of choice. The number of recorded angles is indicated by the icon shown below. Subpicture (subtitles) function A DVD video can record subtitles for
up to 32 languages and you can select the language of the subtitles you wish to see.
The number of recorded subtitle languages is indicated by the icon shown below. 4 VX709E 2. PRECAUTIONS WARNING For your safety, the driver should
not watch the DVD video/movie data or operate the controls while driving. Please note that watching and operating the DVD video/movie data while driving
are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard. 1. When the inside of the car is
very cold and the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical parts of the player and proper
playback may not be possible. If moisture forms on the disc (DVD/CD), wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not
use the player for about one hour. The condensation will disappear naturally allowing normal operation.
2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event
that trouble a unit. [], [+] (Volume) buttons Use these buttons to increase/decrease the volume. [SRC] button Press this button to display the Source screen to
switch the source mode. Keep pressing this button more than 1 second to turn off the audio feature (AUDIO OFF). Press this button to turn on the audio
feature.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
8 VX709E Functions of Buttons English [R], [F] buttons Use these buttons to change to the previous/ next preset station in the TUNER mode.
In the DVD Video mode, use these buttons to select a chapter to be played. Keep pressing a button during playback performs the fast backward or fast
forward playback. Keep pressing the [F] button during pausing performs the slow playback. In the CDDA, MP3/WMA/AAC/DivX, and iPod/ USB
Memory/Bluetooth (Audio) modes, use these buttons to select a track to be played. Keep pressing a button during playback performs the fast backward or fast
forward playback.
[MENU] button Press this button to display the Menu screen. You can change the system settings from this screen. When displaying the General Settings
screen, keep pressing this button more than 2 seconds to display a screen for entering your personal code of the anti-theft function. [MAP] button*1 Pressing
this button in the audio/visual modes changes to the Navigation mode. [ ] (Voice/SEND/END) button*2 When a call comes in, press this button to answer the
call.
During a call, press this button to end the call. When a navigation system is connected, press this button to display the Voice Command screen of the
navigation system. [TA] button Press this button to turn on/off the TA (Traffic Announcement) standby mode. Keep pressing this button more than 1 second to
turn on/off the Auto Antenna function (see page 63). [7] (OPEN/CLOSE) button Use this button to open/close the operation panel. Keep pressing this button
to adjust the angle of the operation panel. The angle of the operation panel is adjustable in the range of 0q to 30q. Blink LED When the Blink LED function is
set to "ON" from the System tab menu on the General Settings screen, blinks when the ACC power is turned off. Note: *1 This button is available only when a
navigation system is connected. *2 This button is available only when a navigation system is connected or the connection with a Bluetooth telephone is
established.
However, the Voice Command operation is not possible with the navigation system NP509E. Owner's manual VX709E 9 Outline of Button and Touchkey
Operation Turning the power on English Owner's manual Engine ON position System check The CeNET format utilized on this unit is provided with a system
check function. When the system check function is performed under the following conditions, the power is automatically turned off. Press the [SRC] button
again. When power is first turned on after initial installation. When an external device is connected or disconnected. When Reset button is pressed. * In
addition to the above conditions, the system check function can be performed from the System tab menu on the General settings screen. Note: *1 These images
indicate the buttons to press or keys to touch. or 1 You can change the media sources.
10 VX709E Outline of Button and Touchkey Operation English TUNER mode operation (Source screen) Owner's manual Switches the radio band. Selects
Home/Travel modes. Manual tuning Seek tuning (Options screen) (Preset List screen) (PTY Select screen) Select desired station after selecting radio band.
(PTY Item screen) VX709E 11 Outline of Button and Touchkey Operation English Owner's manual DVD Video mode operation (DVD Video mode screen) *2
(Source screen) * Screen during DVD Video mode when automobile moving. (Options screen) (DVD Setup screen) Note: *2 When playing a DVD video
movie, touching the screen surface will cause the DVD Video mode screen to be displayed.
12 VX709E Outline of Button and Touchkey Operation English Bluetooth telephone operation Owner's manual (Menu screen) (Telephone screen) (10Key
screen) To make a call, enter the telephone number using 10-Key Pad, then touch the [ ] (Send) key. (Cellular Select screen) Register your Bluetooth cellular
phone beforehand. Touch your desired Telephone key to select the telephone to be used. VX709E 13 Outline of Button and Touchkey Operation English
Owner's manual Adjusting the General settings (Menu screen) (General Settings screen) (Wall Paper tab screen) (Display tab screen) (System tab screen) 14
VX709E Outline of Button and Touchkey Operation English Adjusting the Audio settings Owner's manual (Menu screen) (OTHERS tab screen) (Audio
Settings screen) (BAL/FAD tab screen) (DZE tab screen) (TONE tab screen) VX709E 15 Remote Control Unit Names of buttons Signal transmitter Operating
range: 30 in all directions English Owner's manual [SUBTITLE] [AUDIO] [TOP MENU] [ANGLE] [MENU] [E], [e], [T], [t] [RETURN] [ENT] [SOURCE]
[BAND] [6] [], [+] [R], [F] Inserting the Battery 1. Slide the rear cover in the direction of the arrow, and remove it.
2. Insert the CR2025 battery bundled with the remote control unit in the directions shown in the figure, then close the rear cover. Note: Using battery
improperly can cause it to explode. Take note of the following points: Do not short-circuit, disassemble or heat battery. Do not dispose of battery into fire or
flames. Dispose of spent battery properly. CR2025 battery Rear cover Rear side 16 VX709E Remote Control Unit English Functions of Remote Control Unit
Buttons You can use the remote control unit to control the VX709E. When the 2Zone function is ON, the controls work upon the Sub zone only. Note: The
steering wheel remote control operations work upon the Main zone even when the 2Zone function is ON. Owner's manual [AUDIO] button Press to set the
Audio language.
(in DVD Video mode) [SUB TITLE] button Press to display subtitles. (in DVD Video mode) [ANGLE] button Press to set the Angle function of the DVD video
when the Angle mark is displayed. (in DVD Video mode) * Available only when the Angle function in the DVD Setup screen is set to "ON". [VOL ], [VOL +]
buttons Decreases or increases the volume. (in any mode; disabled when 2Zone ON) [6] button Press to play or pause video and audio media. (in DVD, USB,
and Bluetooth modes; disabled in USB/Bluetooth modes when 2Zone ON) Keep pressing more than 1 second to stop video playback. (in DVD Video mode)
[R], [F] buttons Press to select the next lower or higher preset station. (in TUNER mode; disabled when 2Zone ON) Press to select the next lower or higher
chapter number. (in DVD Video mode) Press to select the next lower or higher track. (in CDDA, MP3/WMA/AAC/DivX, USB, and Bluetooth modes) Keep
pressing to perform fast backward or fast forward playback.
(in DVD, USB, and Bluetooth modes) [TOP MENU] button Press to display the DVD top menu stored on the DVD video disc. Some discs are not displayed
the DVD top menu. (in DVD Video mode) [MENU] button Press to display the DVD menu stored on the DVD video disc. (in DVD Video mode) [ENT] button
Press to fix the selected menu item on the DVD menu.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
(in DVD Video mode) [E], [e], [T], [t] buttons Press to select desired menu item displayed on the DVD menu.
(in DVD Video mode) [SOURCE] button Press to switch the source modes such as TUNER mode, DVD mode, etc. (in any mode) * Only DVD, USB, and AUX
modes are selectable when 2Zone ON. Keep pressing more than 1 second to turn the 2Zone function ON/OFF. (in any mode) [RETURN] button Press to
return to the previous screen while the DVD menu is being displayed. However, it may occur that this button operation dose not work on some discs.
(in DVD Video mode) [BAND] button Switches reception bands. (in TUNER mode; disabled when 2Zone ON) Keep pressing more than 1 second to switch the
Home/Travel modes. (in TUNER mode; disabled when 2Zone ON) Press to select the next higher folder. (in MP3/ WMA/AAC/DivX and USB memory modes)
VX709E 17 4. BASIC OPERATIONS Note: Be sure to read this chapter referring to the chapter "3. CONTROLS" (page 8). English Owner's manual Turning
On and Off the Power CAUTION CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may
harm your hearings. Be careful about adjusting the volume. Note: Start the engine before using this unit. Be careful about using this unit for a long time
without running the engine.
If you drain the car's battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Start the engine. The power
is supplied to this unit. Engine ON position 2. Press the [SRC] button. The unit automatically memorizes its last operation mode and will automatically switch
to display that mode. 3. To turn off the power, press and hold the [SRC] button for more than 1 second. About the CT (Clock Time) display The displayed
clock data is based on the CT (clock time) data in the RDS signal, or the GPS data when the Navigation system is connected.
When the CT data cannot be received, "--:--" appears in the display. Adjusting the Volume 1. Press the []/[+] buttons to adjust the volume. []: Decreases the
volume. [+]: Increases the volume.
The volume level indicated in the display is in a range from 0 (min.) to 33 (max.). CAUTION CAUTION While driving, keep the volume level at which
external sounds can be heard. Opening the operation panel and adjusting the angle Open the operation panel when inserting/ejecting a disc.
The angle of the operation panel can be adjusted depending on the mounting angle of the unit or light coming into the car. CAUTION CAUTION Do not move
the operation panel forcibly or do not apply strong force to the operation panel. When the operation panel is operating, be careful not to get your hand or
finger caught between the operation panel and main unit or its mechanical parts. The driver should not operate the operation panel while driving. 18 VX709E
Opening the operation panel and adjusting the angle English Opening/closing the operation panel 1. Press the [7] (OPEN/CLOSE) button. The operation
panel will be opened or closed. Adjusting the angle of the operation panel The angle of the operation panel can be adjusted in the range of 0q to 30q. 1. Keep
pressing the [7] (OPEN/CLOSE) button.
After about 1 second, beeps will sound twice and the operation panel will start moving. Owner's manual Note: The operation panel will close automatically
when leaving it open for a while. When the operation panel is open, the touch panel cannot be operated. 2. When the operation panel is moved to your desired
angle, release the button. The operation panel will stop. * Once you adjust the angle of the operation panel, the operation panel will return to the adjusted
angle even after it is open/closed. Returning the operation panel to the original angle 1. Keep pressing the [7] (OPEN/CLOSE) button. It will move, and stop
at 30q.
2. Keep pressing the [7] (OPEN/CLOSE) button again. It will move, and stop at 0q. Turning the Audio OFF You can turn off all of the AV features. 1.
Keep pressing the [SRC] button more than 1 second. The AV features are turned off. Turning the AV features on 1. Press the [SRC] button. The AV features
are turned on, and the system resumes the last status of the AV features.
Turning the Monitor OFF You can turn off the monitor screen, and change it to a black screen. 1. Pressing the [MENU] button to display the Menu screen. 2.
Touch the [Moni Off] key. The monitor screen is turned off. Turning the monitor on 1. Touch the monitor screen. The monitor screen is turned on, and
resumes the last screen. You can also turn on the monitor by pressing any button except for the [o] (EJECT), [7] (OPEN/CLOSE), and []/[+] buttons.
VX709E 19 Setting/Ejecting a Disc Notes on handling discs Handling New discs may have some roughness around the edges. If such discs are used, the
player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. Ball-point pen Roughness
English Owner's manual Cleaning To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the disc to the
circumference. Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean discs. After using special disc cleaner,
let the disc dry off well before playing it. On Discs Exercise a good precaution when loading a disc. The operation panel will close automatically when
leaving it open for a while. Never turn off the power and remove the unit from the car with a disc loaded. CAUTION Never stick labels on the surface of the
disc or mark the surface with a pencil or pen.
Never play a disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a disc, you may not be able to get it back out of
the DVD player or it may damage the DVD player. Do not use discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause
misoperation or damage. To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.
Do not use commercially available disc protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the
internal mechanism. CAUTION For your safety, the driver should not insert or eject a disc opening the operation panel while driving. No/Non Storage Do not
expose discs to direct sunlight or any heat source. Do not expose discs to excess humidity or dust.
Do not expose discs to direct heat from heaters. 20 VX709E Setting/Ejecting a Disc English Setting a disc 1. Press the [7] (OPEN/CLOSE) button to open the
operation panel. 2. Insert a disc into the center of the insertion slot with the label side facing up. The disc will automatically be drawn into the DVD player.
CAUTION For your safety, the driver should not insert or eject a disc opening the operation panel while driving.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
Owner's manual Ejecting a disc 1. Press the [7] (OPEN/CLOSE) button to open the operation panel. 2.
Press the [o] (EJECT) button to eject the disc. The screen changes to the DVD mode screen, and "EJECT" appears. If a disc is left in the ejected position for
15 seconds, the disc is automatically reloaded (Auto reload). 3. Remove the disc carefully. Note: If you force a disc into the insertion slot before auto
reloading, this can damage the disc. After setting a disc The system will automatically be switched to the relevant source media mode according to the disc,
and start playing back the disc. When a DVD video disc is set: The system is switched to the DVD Video mode. See "DVD Video Operations" (page 31). When
an Audio CD is set: The system is switched to the CDDA mode.
See "Audio CD Operations" (page 38). When a CD/DVD with MP3/WMA/AAC/DivX files is set: The system is switched to the MP3/WMA/AAC mode or DivX
mode according to the Playform setting. See "MP3/WMA/AAC Operations" (page 40) or "DivX Operations" (page 43). Note: Never insert foreign objects into
the disc insertion slot. If the disc is not inserted easily, there may be another disc in the mechanism or the unit may require service.
8 cm (single play) discs cannot be used. VX709E 21 Connecting/Disconnecting an USB Media Device This unit has one USB (Universal Serial Bus) connector
which is compatible with USB 1.1 and USB 2.0. English Owner's manual Playable USB media devices This system can control the following USB media
devices connected to the USB connector.
Apple iPod USB memory About the Apple iPod iPods can be connected by using the connector cable supplied with the iPod, but in this case, you can enjoy its
audio sound only. To enjoy video movies stored in the iPod with video displaying them on this unit, it is required to use the special connector cable separately
sold. Note: This system will not operate or may operate improperly with unsupported versions. For detailed information on the playable iPod models, see our
home page: www.clarion.com For the other limitations, see "iPod Operations" (page 45). About the USB memory This system can play audio files
(MP3/WMA/ AAC) stored in an USB memory which is recognized as "USB Mass Storage Class device". You can use your USB memory as an audio device by
simply copying desired audio files into it. Note: This system will not operate or may operate improperly with some USB memory. Files protected with any
DRM can not be played.
For the other limitations, see "USB Memory Operations" (page 49). 22 VX709E Connecting/Disconnecting an USB Media Device English Connecting an
USB media device CAUTION For your safety, the driver should not connect or disconnect an USB media device. Do not start the vehicle's engine while the
USB media device is connected, since it may result in loss or damage to data on the USB media device. Connect the USB media device to this unit after
starting the engine. 1. Turn on the power of your USB media device, if required. 2. Confirming the orientation of the connectors, connect the USB media
device to the USB connector of this unit. It may take a long time to recognize the connected device. Disconnecting an USB media device 1.
Confirm that data transfer is not performed on the USB media device. For the method to confirm it, see the operation manual of your USB media device. 2.
Remove the USB media device from the USB connector. Owner's manual CAUTION Be sure to disconnect the USB media device while the vehicle's engine is
running.
Otherwise, it may result in loss or damage to data on the USB media device. Do not stop the engine when the USB media device is connected. Note: When
turning on the ACC power with no USB media device connected, "MEDIA CHECK" may be displayed on the screen if the USB mode is selected. After
connecting an USB device The system will automatically be switched to the relevant source media mode according to the USB device connected, and start
playback. When an iPod is connected: The system is switched to the iPod mode.
See "iPod Operations" (page 45). When an USB memory is connected: The system is switched to the USB Memory mode. See "USB Memory Operations"
(page 49). Note: Never insert foreign objects into the USB connector. Always insert the USB media device fully into the connector. Incomplete connections
may cause the device not to be recognized. VX709E 23 Selecting a Media Source Changing the souce mode 1. Press the [SRC] button to display the Source
screen. English Owner's manual 2. Touch the desired Source key you wish to change to.
The system is switched to the corresponding source media mode. Available media sources Source mode TUNER mode DVD mode Corresponding source
media mode TUNER mode DVD Video mode CDDA mode MP3/WMA/AAC mode DivX mode USB mode iPod mode USB Memory mode Refer to page 26
page 31 page 38 page 40 page 43 page 45 page 49 Description -- The source media mode differs depending on the data format of the disc set in the DVD
player. When no disc is set in the DVD player, "NO DISC" will be displayed. The source media mode differs depending on the type of the USB media device
connected to the USB connector. When no USB media device is connected, "NO MEDIA" will be displayed. -- -- Bluetooth mode AUX mode Bluetooth mode
AUX mode page 50 page 58 Note: When the USB mode is selected, video images input from the AUX terminal will be output to the rear monitor. This is
normal. To select the BT Phone or Navigation mode You can select the BT Phone or Navigation mode from the Menu screen displayed by pressing the
[MENU] button. For details of the BT Phone mode operations, see "Bluetooth Telephone Operations" (page 52). For details of the Navigation mode
operations, see "Navigation System Operations" (page 57).
24 VX709E 2Zone Function About the 2Zone function The 2Zone function is a function that assigns separate source output to the Main zone (this unit) and
Sub zone (the optional rear monitor) by simultaneously playing two sources in this system. Therefore, the rear passengers are allowed to enjoy a different
video source from the source played on the monitor screen of this unit. The source sounds of the Main zone are output from the speakers of the vehicle side,
and those of the Sub zone are from the optional headphone systems. Controlling a source assigned to the Sub zone can be made by using the optional remote
control unit. To control it from this unit, once assign the same source to the Main zone, then control it.
When a media without video images is played on the Sub zone, a black screen is output to the rear monitor. Note: When an interrupt of the Bluetooth
telephone or the navigation system arises during the 2Zone function is turned on, the sound of the Main zone is muted, but the sound of the Sub zone is output
normally.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
When it arises during the 2Zone function is turned off, the audio signals to the 4ch speakers are attenuated, and the voice from the navigation system is
output from the front two speakers. You cannot operate the 2Zone function during the interrupt of the Bluetooth telephone or the navigation system. When the
same source is assigned for Main and Sub zones, operations in a zone are also applied for another zone.
English Owner's manual Assignable source mode for Main/ Sub zones For Main zone All the source modes can be assigned for the Front zone. For Sub zone
The following source modes can be assigned: DVD mode USB mode AUX mode 3. Touch the desired source key you wish to assign to the Sub zone. The
2Zone function is turned on with the selected source mode assigned to the Sub zone. 4. Touch the [Back] key to return to the previous screen. Note: Use the
remote control unit to control the source assigned to the Sub zone. To control it from this unit, once select the same source mode as assigned to the Sub zone
for the Main zone, and then control it. Setting the 2Zone function The factory default setting is OFF. 1.
Press the [SRC] button to display the Source screen. 2. Touch the [2 Zone] tab to display the 2 Zone tab screen. The source keys for the Sub zone are
displayed. Turning off the 2Zone function 1. Press the [SRC] button to display the Source screen. 2. Touch and hold the [2Zone Off] key for more than 1
second. VX709E 25 5. SOURCE OPERATIONS Radio Operations Listening to the radio 1.
Press the [SRC] button, and touch the [TUNER] key. The TUNER mode screen is displayed, and the system resumes the last status of the TUNER mode. DX
SEEK Touch the [R] or [F] key to automatically seek a station. When the [F] key is touched, the station is sought in the direction of higher frequencies; if the
[R] key is touched, the station is sought in the direction of lower frequencies. When the DX Seek tuning starts, "DX SEEK" appears on the screen.
LOCAL SEEK If you keep touching the [R] or [F] key more than 1 second, the Local Seek tuning is carried out. The broadcast stations with good reception
sensitivity are automatically selected. When the Local Seek tuning starts, "LO SEEK" appears on the screen. English Owner's manual 2. Touch the [Home] or
[Trav] key to select the Home or Travel mode.
The Home/Travel modes are provided to manage the preset stations separately in your home location and in a location during a trip. 3. Touch the [Band] key
to select the radio band. Each time the key is touched, the radio reception band changes in the following order: In Home mode: FM Home 1 or 2 AM Home
(MW/LW) FM Home 1 or 2... (The last FM band will be selected.) In Travel mode: FM Travel AM Travel (MW/LW) FM Travel...
4. Press the [R] or [F] button to tune in the previous or next preset station. Manual tuning There are 2 ways available: Quick tuning and step tuning. When it
is in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Touch the [Band]
key to select the desired band (FM or AM (MW/LW)). 2. Tune into a station. Quick tuning: Touch and hold the [TT] or [tt] key to tune in a station.
Step tuning: Touch the [TT] or [tt] key to manually tune in a station. Seek tuning There are 2 types of seek tuning: DX SEEK and LOCAL SEEK. The DX
SEEK can tune in to receivable broadcast stations, and the LOCAL SEEK can tune in to only broadcast stations with a good reception condition. 1. Touch the
[Band] key to select the desired band (FM or AM (MW, LW)).
2. Tune in to a station. If "TA" is displayed on the screen, TP stations are automatically sought. Recalling a preset station There are total of 40 preset
positions (8-FM Home 1, 8-FM Home 2, 8-AM Home, 8-FM Travel, and 8-AM Travel) to store individual radio stations in memory. There are 2 ways
available to recall the preset station.
Using the [R] or [F] button 1. Touch the [Home] or [Trav] key and touch the [Band] key to select the desired band. 2. Press the [R] or [F] button to recall
the previous or next stored station. 26 VX709E Radio Operations English Using the Preset List screen 1. Touch the [Home] or [Trav] key to select the Home
or Travel mode. 2. Touch the [List] key to display the Preset List screen. 3. Touch the desired Band key to select the band.
4. Touch the corresponding Preset key to recall the stored station. Touching and holding the desired Preset key for more than 2 seconds will store the current
station to the preset memory. 5. Touch the [Back] key to return to the previous screen. Scrolling radio text When the current station broadcasts text data, it is
displayed on the TUNER mode screen. When the text is longer than the text area, you can confirm the entire text by scrolling it. 1. Touch the [x] key displayed
at the right of the text area. The text will scroll once.
Owner's manual About the RDS (Radio Data System) This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data.
This system can display the name of the broadcast station being received (PS), and can automatically switch to the broadcast station with the best reception
as you move long distances (AF switching). Also, if a traffic announcement or program type information is broadcast from an RDS station, no matter what
mode you are in, this broadcast is received. Additionally, if EON information is received, this information enables automatic renewal of other preset stations
on the same network and interruption of traffic announcement and/or chosen program type from other stations (TP). This function is not available in some
areas.
"AF" : Alternative Frequency "PS" : Program Service Name "PTY" : Program Type "EON": Enhanced Other Network "TP" : Traffic Program The RDS
interrupt does not function during AM (MW/LW) radio reception. Manual memory 1. Touch the [Home] or [Trav] key to select the Home or Travel mode. 2.
Touch the [List] key to display the Preset List screen.
3. Touch the desired Band key to select the band you wish to store. 4. Tune in the station you wish to store using the seek tuning, manual tuning, or preset
tuning. 5. Touch and hold the desired Preset key you wish to store the current station for more than 2 seconds. Auto Store The Auto Store is a function for
storing up to 8 stations that are automatically tuned in sequentially. If 8 receivable stations cannot be received, a previously stored station remains
unoverwritten at the memory position. The Auto Store function works only in the Travel mode. 1.
Touch the [Trav] key to select the Travel mode. 2. Touch the [List] key. 3. Touch desired Band key to select the band. 4. Touch the [AS] key to start scanning
stations. A beep sounds and the stations with good reception are stored automatically to the preset channels. "AS" appears during scanning stations. To stop
the scanning, touch the [AS] key again.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
VX709E 27 Radio Operations English Owner's manual AF (Alternative Frequency) function The AF function switches to a different frequency on the same
network in order to maintain optimum reception. TA (Traffic Announcement) function When a traffic announcement broadcast starts during the TA standby
mode, the traffic announcement broadcast is received as top priority regardless of the function mode, so you can listen to it. The Traffic Program (TP)
automatic tuning is also available. Switching ON/OFF the AF function 1. Touch the [Options] key.
2. Touch the [ON] or [OFF] key of the AF item to turn the function on or off. When the AF function is ON, "AF" will be displayed at the bottom of the screen.
If the reception of the current broadcast station deteriorates durably, "AF" indication will blink, and this unit searches for the same program on another
frequency. Setting TA standby mode 1.
Press the [TA] button to set the TA standby mode. "TA" will be displayed at the bottom of the screen, and the system will automatically search for a TP station
(TP SEEK). When an RDS broadcast station with traffic announcement program is received, "TP" will be displayed at the bottom of the screen. You can also
set this function from the Options screen by selecting the [ON] or [OFF] key of the TA item. Note: If no TP station is received, this system continues the
search operation. Performing the above procedure again makes the "TA" go off, and stops TP station searching. REG (Regional Program) function When the
REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area is switched as you drive, a regional
station for that region is received. Note: This function is disabled when a national station such as BBC R2 is being received. The REG function ON/OFF
setting is enabled only when the AF function is ON.
Switching ON/OFF the REG function 1. Touch the [Options] key. 2. Touch the [ON] or [OFF] key of the REG item to turn the function on or off. Manually
tuning a regional station in the same network Note: This function can be used when a regional broadcast of the same network is received. This function is
enabled only when the AF function is ON and the REG function is OFF. Canceling a Traffic Announcement broadcast Press the [TA] button while a Traffic
Announcement broadcast is being received. The Traffic Announcement broadcast reception is canceled, and the system goes into the TA standby mode.
Canceling TA standby mode 1. When "TA" is displayed on the screen, press the [TA] button.
"TA" on the screen goes off, and the TA standby mode is canceled. 1. Touch the [List] key. 2. Touch the desired Band key to select the band.
3. Touch your desired Preset key to call out a regional station. 4. Each time you touch the same Preset key, this unit switches from a local station to the other
on the same network. 28 VX709E Radio Operations English PTY (Program Type) function This function enables you to listen to a broadcast of the specified
program type when the broadcast starts, even if the system operates in a mode other than the TUNER mode.
Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority over a PTY broadcast station. Changing the PTY language
1. Touch the [Options] key. 2. Touch the [PTY Language] key to display the PTY Language screen. 3. Touch the desired Language key you wish to set. 4.
Touch the [Back] key to return to the previous screen.
Owner's manual Selecting PTY 1. Touch the [Options] key. 2. Touch the [ON] key of the PTY item to enter the PTY standby mode. 3. Touch the [PTY Select]
key to display the PTY Select screen. 4. Touch your desired PTY item key to select the program type. The following table shows the factory default settings
stored for the Preset keys: Preset number 1 2 3 4 5 6 7 8 PTY item ENGLISH News Info Pop M Sport Classics Easy M Light M Weather Contents News
Information Pop music Sport Classics Easy listening music Light classical music Weather 5. Touch the [Back] key to return to the previous screen.
Canceling PTY standby mode 1. Touch the [Options] key. 2. Touch the [OFF] key of the PTY item. "PTY" goes off, and the PTY standby mode is canceled.
Canceling PTY interrupt broadcast 1. Press the [TA] button during receiving the PTY interrupt broadcast. The PTY interrupt is canceled, and the system
returns to PTY standby mode. You can also cancel the PTY interrupt broadcast by touching the [Cancel] key displayed on the screen. VX709E 29 Radio
Operations English Owner's manual PTY seek 1.
Touch the [Options] key. 2. Touch the [PTY Select] key to display the PTY Select screen. 3. Touch the [ITEM] key to display the PTY Item screen. 4. Touch
your desired Program Type key. 5. Touch a Seek key. If you touch the [F] key, the system seeks a PTY broadcast moving up the frequencies.
If you touch the [R] key, it seeks moving down the frequencies. If no station with the selected PTY broadcast can be received, the unit returns to the previous
mode. The 29 types of PTY listed below can be selected. PTY item ENGLISH News Affairs Info Sport Educate Drama Culture Science Varied Pop M Rock M
Easy M Light M Classics Other M Weather Finance Children Social Religion Phone in Travel Leisure Jazz Contents News Current Affairs Information Sport
Education Drama Culture Science Varied Pop Music Rock Music Easy Listening Music Light Classical Music Serious Classical Music Other Music Weather
Finance Children's Programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Nation M Oldies Folk M Document Country Music
National Music Oldies Music Folk Music Documentary Emergency broadcast If an emergency broadcast is received, all the function mode operations are
stopped. "Alarm" appears on the screen and the emergency broadcast can be heard. Canceling an emergency broadcast 1. Press the [TA] button during
receiving the emergency broadcast. The emergency broadcast is canceled, and the system returns to the PTY standby mode. You can also cancel the
emergency broadcast by touching the [Cancel] key displayed on the screen. Volume setting of TA, emergency broadcast (Alarm) and PTY The volume for TA,
Alarm and PTY interrupts can be set during TA, Alarm or PTY interrupt.
The factory default setting is "15". 1. Use the [VOL +] and [VOL ] buttons to set the volume to the desired level (00 to 33) during a TA, Alarm or PTY
interrupt. When the TA, Alarm, or PTY interrupt ends, the volume returns to the level before the interrupt. 30 VX709E DVD Video Operations Selecting the
DVD Video mode 1.
Set a DVD video disc to the DVD player. The system will automatically read the disc data, change to the DVD mode (DVD Video mode), and start playback
after a while. See also "Setting/Ejecting a Disc" (page 20). English Owner's manual Changing the DVD System Settings Note: If the Setup operation is
performed in the middle of DVD video play, the disc will restart from beginning.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
Displaying the DVD Setup screen 1.
Touch the screen to display the DVD Video mode screen. 2. Touch the [Options] key to display the Options menu. 3. Touch the [Set up] key to display the
DVD Setup screen. WARNING Some videos may be recorded at a higher volume level than desired. Increase the volume gradually from the minimal setting
after the video has started. For your safety, the driver should not watch the video or operate the controls while driving. Please note that watching and
operating the video while driving are prohibited by law in some countries. Note: For your safety, this system has a safety function which turns off the picture
when the car is moving, so only the audio can be heard.
@@ If "AUDIO ONLY" appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then
engage the parking brake again. Touch the [C] key to display the next page. Touch the [c] key to return to the previous page. When a DVD video disc is
already set 1. Press the [SRC] button to display the Source screen. 2. Touch the [DVD] key to select the DVD Video mode. The system changes to the DVD
mode (DVD Video mode), and starts playback from the previous position. 4. Perform setting for the desired setting items.
See the following sections for detail. In the following sections, only the details of settings are described, the procedures to select items are skipped. 5. Touch
the [Back] key. VX709E 31 DVD Video Operations English Owner's manual Setting up the screen size Set up the screen size according to the optional rear
monitor which is connected to this unit.
The factory default setting is "Wide". 4-1. Touch the [Wide], [PS], or [LB] key of the TV Display item to change the screen size to "Wide", "Pan Scan" or
"Letter Box". When watching through a wide type of the rear monitor (16:9) Wide: Setting up the disc menu language The factory default setting is "English".
4-1.
Touch the [x] key of the Menu Language item. 4-2. Touch the desired Language key you wish to set. 4-3. Touch the [Back] key. Setting up the audio language
The factory default setting is "English". 4-1. Touch the [x] key of the Audio Language item. 4-2. Touch the desired Language key you wish to set.
When watching through a conventional type of the rear monitor (4:3) Pan Scan: The leftmost and rightmost areas of the screen are cut off. 4-3. Touch the
[Back] key. Setting up the subtitle language The factory default setting is "English". 4-1. Touch the [x] key of the Subtitle Language item. 4-2. Touch the
desired Language key you wish to set. To turn off the subtitle, select the [Off] key. This function allows displaying the important part of image fully on the
screen.
In some cases, image is displayed while being panned (scrolled). Letter Box: A black zone is created in the top and bottom areas of the screen. 4-3. Touch the
[Back] key. Setting up the password for setting up of the parental level The factory default setting is "0000".
4-1. Touch the [x] key of the Password item. 4-2. Touch the ten-key (0 to 9) to input a 4-digit password. Input the old password, and touch the [ENT] key.
Input "4356" to reset password. Input a new password, and touch the [ENT] key. Input the same new password again, and touch the [ENT] key. Note: When a
disc with view restrictions is inserted, you will be prompted to input a password. The disc will not be viewable until the correct password is entered. This
method displays Cinema Scope and Vista Vision images without cutting them off by creating a black zone on the top and bottom gaps. Setting up the angle
mark display You can set up so that the angle mark appears on scenes where the angles can be switched. The factory default setting is "OFF". 4-1. Touch the
[ON] or [OFF] key of the Angle item to turn the Angle function ON or OFF.
32 VX709E DVD Video Operations English Setting up the country code Set up the country number for setting up of the parental level. The factory default
setting is "7166" (U.K.). 4-1. Touch the [x] key of the Country Code item. 4-2. Touch the ten-key (0 to 9) to input a 4-digit country code (see the following
table). 4-3. Touch the [ENT] key.
Country code list: Country ALBANIA ANDORRA AUSTRIA BAHRAIN BELGIUM BOSNIA AND HERZEGOWINA BULGARIA CROATIA (local name:
Hrvatska) CYPRUS CZECH REPUBLIC DENMARK EGYPT FINLAND FRANCE (FRANCE,METROPOLITAN) GERMANY GREECE HUNGARY ICELAND
IRAN (ISLAMIC REPUBLIC OF) IRAQ IRELAND ISRAEL ITALY JAPAN JORDAN KUWAIT LEBANON LESOTHO Input code 6576 6568 6584 6672 6669
6665 6671 7282 6789 6790 6875 6971 7073 7082 7088 6869 7182 7285 7383 7382 7381 7369 7376 7384 7480 7479 7587 7666 7683 LIECHTENSTEIN
LUXEMBOURG MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF MALTA MONACO NETHERLANDS (NETHERLANDS ANTILLES) NORWAY
OMAN POLAND PORTUGAL QATAR ROMANIA SAN MARINO SAUDI ARABIA SLOVAKIA (Slovak Republic) SLOVENIA SOUTH AFRICA SPAIN
SWAZILAND SWEDEN SWITZERLAND SYRIAN ARAB REPUBLIC TURKEY UNITED ARAB EMIRATES UNITED KINGDOM Vatican City State YEMEN
YUGOSLAVIA FAROE ISLANDS GIBRALTAR GREENLAND SVALBARD AND JAN MAYEN ISLANDS 7673 7685 7775 Owner's manual 7784 7767 7876
6578 7879 7977 8076 8084 8165 8279 8377 8365 8375 8373 9065 6983 8390 8369 6772 8389 8482 6569 7166 8665 8969 8985 7079 7173 7176 8374
VX709E 33 DVD Video Operations English Owner's manual Setting up the parental level You can change the level of parental lock (audiovisual restriction).
This function allows cutting scenes that are unfavorable for children or replacing them automatically with other scenes prepared in advance. For example, by
replacing scenes of radical violence or portrayals of sex with safe scenes, you can make a trouble-free story as if it were so from the beginning. The factory
default setting is "8". 4-1.
Touch the [[] or []] key of the Parental Level item. The Password input screen is displayed. 4-2. Touch the ten-key (0 to 9) to input a 4-digit password, and
touch the [ENT] key. The factory default setting of the password is "0000".
4-3. Touch the [[] or []] key to select level "1" to "8", or "No Parental". The relationship between DVD video category codes and parental level are shown in
the table below. Use this table when setting the parental level. LEVEL7 NC-17 (NO ONE 17 AND UNDER ADMITTED) R (RESTRICTED) PG-13 (PARENTS
STRONGLY CAUTIONED) PG (PARENTAL GUIDANCE SUGGESTED) G (GENERAL AUDIENCES) About the volume adjustment when playing DVD
Video discs This system has the independent volume data for playing DVD Video discs. The volume setting during DVD playback does not affect the volume of
the other modes, and the volume setting in the other modes does not affect the DVD playback. When the DVD menu is displayed For general DVD Video
discs, the DVD menu may appear. After the DVD menu is displayed, select an item in the operations described as follows.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
Showing the DVD Video mode screen The DVD Video mode screen is used to control the playback mode from the screen. 1.
Touch the screen. The DVD Video mode screen is displayed. If you do not touch the screen for 7 seconds, the display will return to the playback screen.
Selecting the screen size You can change the screen size to suit to the playback film. The factory default setting is "F.Wide". 1. Touch the screen to display the
DVD Video mode screen. 2. Repeat touching the [Wide/F.
Wide/Cinema/ Normal] key until your desired screen size is selected. This key shows the current screen size setting. [Wide]: The image is expanded in the
same way as the [F.Wide] setting, but the width will become narrower. Depending on the image data, black areas may be displayed at the both sides of the
screen.
[F.Wide]: The image is expanded so that the rectangle of the image fits to the screen (16:9). The aspect ratio of the image may be changed. [Cinema]: The
image is expanded so that the top and bottom edges of the image fit to the screen. Suitable for letterbox-format images.
Subtitles of non-letterboxed images may be cut off in this mode. [Normal]: The image is expanded so that the top and bottom edges of the image fit to the
screen, and that the aspect ratio of the image becomes 4:3. The aspect ratio of the image may be changed. 3. Touch the [Hide] key to return to the playback
screen. LEVEL6 LEVEL4 LEVEL3 LEVEL1 The contents that the parental level restricts vary with the country code. Operating a DVD video Watching a
DVD Video After disc loading, the play mode is automatically engaged. When playback is not started, touch the [p] key. Operations may differ depending on
the story of the disc. 34 VX709E DVD Video Operations English DVD menu operations Showing the DVD menu 1.
Showing the DVD Video mode screen, touch the [Menu] or [Top Menu] key during playback. The DVD menu appears. The displayed contents for each key
differ depending on the DVD software. An example shown below is the DVD menu display: Switching Key Pad position When the menu items become difficult
to view by the Key Pad buttons, you can move the Key Pad panel to the other side of the screen. Key Pad Owner's manual Operating the DVD menu You can
operate the menu items by displaying the Key Pad panel. 1. Touch the screen to display the DVD Video mode screen, and then touch the [Key] key. The
Cursor-Key Pad panel is displayed on the screen. Touching the [Num] key changes the panel to the Numeric-Key Pad. 2.
Select the desired menu item using either the Cursor-Key or the Nummeric-Key according to the menu contents. 3. Touch the [ENT] key to specify the selected
menu item. 4. Touch the [Hide] key to hide the Key Pad panel.
Key Pad Stopping playback 1. Showing the DVD Video mode screen, touch and hold the [p] key for more than 1 second during playback. Playback is stopped.
2. To resume playback, touch the [p] key.
Playback resumes from the scene where playback is stopped. Pausing playback 1. Showing the DVD Video mode screen, touch the [p] key during playback.
Playback pauses. 2. To resume playback, touch the [p] key again. Playback resumes. VX709E 35 DVD Video Operations English Owner's manual Slow
playback 1. Showing the DVD Video mode screen, touch the [p] key during playback to pause playback. 2.
Touch and hold the [F] key. While touching the key, slow playback continues at 1/3 speed. Releasing the key resumes the normal playback. Slow playback
cannot be performed in the backward direction. In addition, audio cannot be reproduced during slow playback. You can also use the [F] button instead of the
[F] key. Skipping chapters (searching) "Chapter" means a small segment to divide the "Title" (film) which is recorded on the disc. 1. Press the [R] or [F]
button during playback. Chapters are skipped as many as the times pressing the button, and playback starts.
Current location Chapter down Chapter Chapter up Fast forward and fast backward 1. Keep pressing the [R] or [F] button during playback. [F] button: Fast
forward [R] button: Fast backward The playback speed becomes 4-times faster at first and then 16-times faster 3 seconds later. Releasing the button resumes
the normal speed playback. No audio is reproduced during fast forward and fast backward operation.
The fast forward and fast backward speed may differ depending on the disc. You can also use the [R] and [F] keys instead of the [R] and [F] buttons.
Pressing the [F] button starts playback from the beginning of the next chapter. Pressing the [R] button starts playback from the beginning of the current
chapter. When pressing this button again within about 4 seconds, playback starts from the beginning of the previous chapter.
You can also use the [R] and [F] keys instead of the [R] and [F] buttons. Searching with a chapter/title number You can locate the beginning of a scene using
the chapter numbers or title numbers recorded on the DVD video disc. "Chapter" means a small segment to divide the "Title" (film) which is recorded on the
disc. 1. Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [Direct] key. The Key Pad screen appears. You can select the next title by
touching the [Title] key. 3.
Input the chapter number that you want to play back using the [0] to [9] key. 4. Touch the [ENT] key. Playback starts from the scene of the input chapter
number of the selected title. If the input chapter number does not exist or searching with a chapter number is not allowed, the screen image will not change.
36 VX709E DVD Video Operations English Repeat playback This operation plays back the current title or chapter repeatedly. 1. Showing the DVD Video
mode screen, touch the [Options] key. 2. Touch the [Title] or [Chapter] key of the Repeat item, then touch the [Back] key.
The "T.RPT" or "C.RPT" will be displayed. 3. Perform the same operation to turn off the repeat playback.
4. Touch the [Back] key to return to the previous screen. Switching angles Owner's manual On DVD discs in which video images have been recorded in two
or more angles, you can switch among the angles during playback. This operation can be performed when the "Setting up the angle mark display" function
(see page 32) is set to "ON". 1.
Showing the DVD Video mode screen, touch the [Angle] key during playback. Each time you touch the key, you can switch among angles. Depending on the
disc, up to 9 angles may be recorded. For details, see the mark of the disc ( : Indicates multi-angle). Depending on the disc, angles may switch smoothly or
switch with a momentary still image. Depending on the disc, switching may be completely impossible or impossible on some scenes. It may take time to switch
among angles. Depending on the disc, scenes recorded in two or more angles may be played back. When the power is turned on and the disc is changed to a
new one, the language set at the time of factory shipment is selected.
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
If that language has not been recorded, the language is specified on the disc.
Switching among languages On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during
playback. 1. Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [Audio] key during playback. Each time you touch the key, you can
switch among audio languages. Depending on the disc, up to 8 audios may be recorded. For details, see the mark of the disc ( 8 : Indicates that 8 audios have
been recorded). Depending on the disc, switching may be completely impossible or impossible on some scenes. It may take time to switch among audios.
When the power is turned on and the disc is changed to a new one, the language set as the factory default is selected. If that language has not been recorded,
the language is specified on the disc. 3. Touch the [Back] key to return to the previous screen. Displaying/hiding the playback status 1.
Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [ON] or [OFF] key of the P.Time item during playback. 3.
Touch the [Back] key to return to the previous screen. Playback status is displayed on the screen. Title number Chapter number Playback time T01 C0 0 1 00
: 00 : 19 Switching subtitles On DVD discs in which two or more subtitle languages have been recorded, you can switch among the subtitle languages during
playback. 1. Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [Subtitle] key during playback. The Subtitle Language screen
appears. 3. Touch the Language key you wish to display.
Depending on the disc, up to 32 kinds of subtitles may be recorded. For details, see the mark of the disc ( 8 : Indicates that 8 kinds of subtitles have been
recorded). To turn of subtitles, select "OFF". Depending on the disc, switching may be completely impossible or impossible on some scenes. It may take time
to switch among subtitles. VX709E 37 Audio CD Operations This system is a CD TEXT compatible model, and supports the display of the DISC TITLE,
TRACK TITLE, and TRACK ARTIST of the CD TEXT. Note: This unit supports only CD TEXT in English. Also, some character data may not be reproduced
properly on the display. English Owner's manual Selecting the CDDA mode 1. Set an audio CD to the DVD player.
The system will automatically read the disc data, change to the DVD mode (CDDA mode), and start playback after a while. See also "Setting/Ejecting a Disc"
(page 20). Operating an audio CD Listening to an audio CD After disc loading, the play mode is automatically engaged. When playback is not started, touch
the [p] key. Pausing playback 1.
Touch the [p] key during playback. Playback pauses. 2. To resume playback, touch the [p] key. Playback resumes.
Skipping a track (searching) WARNING Some CDs may be recorded at a higher volume level than desired. Increase the volume gradually from the minimal
setting after playback has started. For your safety, the driver should not operate the controls while driving. When an audio CD is already set 1. Press the
[SRC] button to display the Source screen. 2. Touch the [DVD] key to select the CDDA mode. The system changes to the DVD mode (CDDA mode), and
starts playback from the previous position. 1. Press the [R] or [F] button during playback.
Tracks are skipped, as many as the times the button is pressed, and playback starts. Pressing the [F] button starts playback from the beginning of the next
track. Pressing the [R] button starts playback from the beginning of the current track. When this button is pressed again within about 2 seconds, playback
starts from the beginning of the previous track. You can also use the [R] and [F] keys instead of the [R] and [F] buttons. Fast forward and fast backward 1.
Press and hold the [R] or [F] button during playback. The playback speed becomes 4-time faster first and then 16-time faster 3 seconds later. Releasing the
button resumes the normal speed playback. You can also use the [R] and [F] keys instead of the [R] and [F] buttons.
38 VX709E Audio CD Operations English Other various play functions 1. Touch the [Options] key. 2. Touch the [Track] key of the function you want to play.
Track repeat playback: Touch the [Track] key of the Repeat item.
This operation plays back the current track repeatedly. "T.RPT" is displayed on the screen. Track random playback: Touch the [Track] key of the Random
item. This operation plays back all tracks on the disc in no particular order.
"T.RDM" is displayed on the screen. 3. To cancel the play, touch the [Track] key of the function to cancel. 4. Touch the [Back] key to return to the previous
screen. Owner's manual Scrolling track titles When a title or name displayed on the screen is longer than the text area, you can confirm the entire text by
scrolling it. 1. @@The text will scroll once. VX709E 39 MP3/WMA/AAC Operations This system can playback MP3/WMA/AAC files recorded on a disc.
English Owner's manual About the MP3/WMA/AAC files What is MP3/WMA/AAC? MP3, WMA, and AAC are the audio file formats which have penetrated
into PC users and become a standard format. MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. WMA (Windows
Media Audio) is an audio compression method developed by Microsoft Corporation. AAC (Advanced Audio Coding) is a newer audio compression method
developed for used with video compression standards MPEG-2 and MPEG-4, and has been adopted as the standard audio format of the iPod and iTunes by
Apple Inc. These features compress the original audio data to about 10 percent of its initial size with a high sound quality. This means that about 10 audio
CDs can be recorded on a CD-R/RW disc to allow a long listening time without having to change CDs. Precautions on the MP3/WMA/AAC files General
precautions Files other than MP3/WMA/AAC format cannot be played. In addition, some files may not be played because of the encoding settings. When a file
cannot be played, the next file is played instead. Some noise may occur depending on the type of encoder software used to encode the data.
You can apply the VBR (Variable Bit Rate) format when encoding. In this case, the displayed play time may be slightly different from the actual play time.
Files that the DRM (Digital Rights Management) function is set cannot be played. For MP3 files Set the Sampling Frequency to: MPEG1 Layer3: 32, 44.1, or
48 kHz MPEG2 Layer3: 16, 22.
05, or 24 kHz MPEG2.5 Layer3: 8, 11.025, or 12 kHz Set the Bit Rate to: MPEG1 Layer3: 32 to 320 kbps (VBR) MPEG2 Layer3: 8 to 160 kbps (VBR)
MPEG2.5 Layer3: 8 to 160 kbps (VBR) Add a file extension ".MP3" or ".
mp3" using single byte characters. For WMA files Set the Sampling Frequency to within ranges from 22.05 to 44.1 kHz. Set the Bit Rate to 48, 64, 80, 96, 128,
160, or 192 kbps. Add a file extension ".WMA" or ".
You're reading an excerpt. Click here to read official CLARION
VX709E user guide
http://yourpdfguides.com/dref/3338734
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising