Panasonic | KXMB3020 | Operating instructions | Panasonic KX-MB3020 multifunctional

Operating Instructions
Multi-Function Printer
Model No.
This pictured model is KX-MB3010.
KX-MB3010
KX-MB3020
Do NOT connect the unit to a computer with the USB cable until prompted by the MultiFunction Station (CD-ROM).
1
2
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
KX-MB3020 only:
L This unit is compatible with Caller ID. You must subscribe to the appropriate service offered
by your service provider/telephone company.
Thank you for purchasing a Panasonic product.
You can select English or Spanish for the language.
The display and reports will be in the selected language.
The default setting is English. If you want to change the
setting, see feature #110 on page 55.
Caution:
L Do not rub or use an eraser on the printed side of
recording paper, as the print may smear.
Notice for product disposal, transfer, or return:
L This product can store your private/confidential
information. To protect your privacy/confidentiality,
we recommend that you erase the information from
the memory before you dispose of, transfer or return
the product.
Environment:
L Panasonic’s strategic direction incorporates concern
for the environment into all aspects of the product life
cycle, from product development to energy saving
designs; from greater product reusability to wasteconscious packaging practices.
For U.S.A. only: Please visit
www.panasonic.com/environmental for more
information.
Note:
L Most figures shown in these operating instructions
are based on a KX-MB3010.
Trademarks:
L Microsoft, Windows, Windows Vista, Internet
Explorer and PowerPoint are either registered
trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
L Pentium is a trademark of Intel Corporation in the
U.S. and other countries.
L Screen shots reprinted with permission from
Microsoft Corporation.
L Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
L 3M is a trademark or registered trademark of 3M
Company.
L Avery is a registered trademark of Avery Dennison
Corporation.
L XEROX is a registered trademark of Xerox
Corporation.
L PCL is a trademark of Hewlett-Packard Company.
L All other trademarks identified herein are the
property of their respective owners.
Copyright:
L This material is copyrighted by Panasonic
Communications Co., Ltd., and may be reproduced
for internal use only. All other reproduction, in whole
or in part, is prohibited without the written consent of
Panasonic Communications Co., Ltd.
© Panasonic Communications Co., Ltd. 2009
2
Important Information
Important
1For
assistance,
Information
please visit http://www.panasonic.com/help
For your safety
Laser radiation
The printer of this unit utilizes a laser. Use of
controls or adjustments or performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
Fuser unit
During or immediately after printing, the
fuser unit (1) gets hot. This is normal. Do
not touch the fuser unit.
Note:
L The area near the recording paper exit (2) may also
get warm. This is normal.
them, open the drum cartridge protection bag. The
drum cartridge contains a photosensitive drum.
Exposing it to light may damage the drum. Once you
have opened the protection bag:
– Do not expose the drum cartridge to light for
more than 3 minutes.
– Do not touch or scratch the black drum surface.
– Do not place the drum cartridge near dust or dirt,
or in a high humidity area.
– Do not expose the drum cartridge to direct
sunlight.
L To extend the life of the drum cartridge, the power
switch should never be turned OFF immediately after
printing. Leave the power turned ON for a minimum
of 30 minutes after printing.
Location
L To avoid malfunction, do not position the unit near
appliances such as TVs or speakers which generate
an intense magnetic field.
Static electricity
L To prevent static electricity damage to the interface
connectors or other electrical components inside the
unit, touch a grounded metal surface before touching
the components.
1
2
For best performance
Toner cartridge and drum cartridge
L When replacing the toner cartridge or drum
cartridge, do not allow dust, water, or liquids to come
in contact with the drum. This may affect print quality.
L For optimal performance, genuine Panasonic toner
cartridges and drum cartridges are recommended.
We cannot be responsible for problems that may be
caused by a non-Panasonic toner cartridge or drum
cartridge:
– Damage to the unit
– Poor print quality
– Improper operation
Environment
L Keep the unit away from electrical noise generating
devices, such as fluorescent lamps and motors.
L The unit should be kept free from dust, high
temperature and vibration.
L The unit should not be exposed to direct sunlight.
L Do not place heavy objects on top of the unit. When
you leave the unit unused for a long period of time,
unplug this unit from the power outlet.
L The unit should be kept away from heat sources such
as heaters, kitchen stoves, etc. Damp basements
should also be avoided.
L During the printing process, heat is used to fuse
toner onto the page. As a result, it is normal for the
machine to produce an odor during and shortly after
printing. Be sure to use this unit in an area with
proper ventilation.
Toner cartridge
L Do not leave the toner cartridge out of the protection
bag for a long time. It will decrease the toner life.
Drum cartridge
L Read the instructions on page 10 before you begin
installation of the drum cartridge. After you have read
For assistance, please visit http://www.panasonic.com/help
3
Important Information
L Do not cover slots or openings on the unit. Inspect
the air circulation vents regularly and remove any
dust build-up with a vacuum cleaner (1).
1
Illegal copies
Routine care
L Wipe the outer surface of the unit with a soft cloth. Do
not use benzine, thinner, or any abrasive powder.
Moving the unit
The unit is heavy. It is highly recommended that two
people handle this unit.
When moving the unit, hold both of the side grips (2).
L It is unlawful to make copies of certain
documents.
Copying certain documents may be illegal in your
country. Penalties of fines and/or imprisonment may
be imposed on those found guilty. The following are
examples of items that may be illegal to copy in your
country.
– Currency
– Bank notes and checks
– Bank and government bonds and securities
– Passports and identification cards
– Copyright material or trademarks without the
consent of the owner
– Postage stamps and other negotiable
instruments
This list is not inclusive and no liability is
assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
L Install your machine near a supervised area to
prevent illegal copies from being made.
2
2
4
For assistance, please visit http://www.panasonic.com/help
Table of Contents
1. Introduction and Installation
1. Table of Contents
Accessories
1.1
1.2
Supplied accessories .................................... 7
Accessory information ................................... 7
Finding the Controls
1.3
1.4
Button descriptions........................................ 8
Overview ....................................................... 9
Installation
1.5
1.6
Toner cartridge and drum cartridge............. 10
Recording paper.......................................... 13
2. Preparation
6.4
6.5
Broadcast transmission................................44
Sending a computer document as a fax
message from your computer ......................46
Receiving Faxes
6.6
Receiving a fax automatically – Auto answer
ON................................................................46
6.7 Receiving a fax manually – Auto answer OFF
.....................................................................47
6.8 Using the unit with an answering machine...47
6.9 Junk fax prohibitor (preventing fax reception
from undesired callers).................................48
6.10 Receiving a fax on your computer................49
6.11 Web fax preview (LAN connection only).......50
Connections and Setup
2.1
2.2
2.3
2.4
Connections ................................................ 15
Turning the power switch ON....................... 16
Dialing mode (KX-MB3020 only) ................. 16
Selecting the operation mode (Scan/Copy)
(Fax: KX-MB3020 only) ............................... 17
Document Requirements
2.5
Setting the original....................................... 17
Help
2.6
Help function (KX-MB3020 only) ................. 19
Volume
2.7
Adjusting the volume (KX-MB3020 only)..... 19
Initial Programming
2.8
2.9
2.10
2.11
2.12
2.13
Date and time .............................................. 20
Your logo (KX-MB3020 only) ....................... 21
Your fax number (KX-MB3020 only) ............ 21
Configuring the unit to access the LAN ....... 22
Installing Multi-Function Station .................. 23
Starting Multi-Function Station .................... 25
7. Caller ID (KX-MB3020 only)
Caller ID
7.1
7.2
7.3
7.4
8. Distinctive Ring (KX-MB3020
only)
Distinctive Ring
8.1
8.2
8.3
8.4
3. Printer
Printing from Windows applications ............ 27
Printing a received email attachment
automatically (LAN connection only) ........... 28
4. Scanner
Scanner
4.1
4.2
Scanning from the unit (Push Scan)............ 30
Scanning from a computer (Pull Scan)........ 32
5. Copier
Copy
5.1
5.2
Making a copy ............................................. 34
More copying features ................................. 35
6. Fax (KX-MB3020 only)
Sending Faxes
6.1
6.2
6.3
Distinctive Ring service ................................53
Using two or more phone numbers on a single
telephone line...............................................53
Using three or more phone numbers on a
single telephone line ....................................53
Programming the ring pattern assigned for fax
.....................................................................53
9. Programmable Features
Printer
3.1
3.2
Caller ID service...........................................51
Viewing and calling back using caller
information ...................................................51
Erasing caller information.............................52
Storing caller information .............................52
Sending a fax manually ............................... 41
Storing items for the one-touch dial feature and
navigator directory....................................... 42
Sending a fax using one-touch dial feature and
navigator directory....................................... 43
Features Summary
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
Programming................................................54
Basic features ..............................................55
Fax features (KX-MB3020 only) ...................59
Copy features ...............................................63
PC print features ..........................................64
Scan features ...............................................66
LAN features ................................................68
Network features (LAN connection only)......70
10.Useful Information
Useful Information
10.1 Character entry ............................................72
10.2 Status of the unit ..........................................72
10.3 Canceling the operations .............................73
Option
10.4 Lower input tray (optional)............................74
10.5 Setting the lower input tray...........................75
5
Table of Contents
11.Help
Error Messages
11.1 Error messages – Reports (KX-MB3020 only)
.................................................................... 76
11.2 Error messages – Display ........................... 77
Troubleshooting
11.3 When a function does not work ................... 80
12.Paper Jams
Jams
12.1 Recording paper jam ................................... 89
12.2 Document jams (Automatic document feeder)
.................................................................... 95
13.Cleaning
Cleaning
13.1 Cleaning the white plates and glass............ 96
13.2 Cleaning the document feeder rollers.......... 97
14.General Information
Printed Reports
14.1 Reference lists and reports ......................... 98
Specifications
14.2 Specifications .............................................. 98
Copyrights
14.3 Information of copyrights and licenses ...... 101
15.Index
15.1 Index......................................................... 111
6
1. Introduction and Installation
1 Introduction
1For
Accessories
assistance,
andplease
Installation
visit http://www.panasonic.com/help
1.1 Supplied accessories
1.2 Accessory information
1 Toner cartridge
(starter)*1
2 Drum cartridge
(KX-FAD452)*2
3 CD-ROM
(PNJKMB3020Z)*2
4 Quick reference guide
(English–
PNQW1644Z)*2
(Spanish–
PNQW1645Z)*2
Accessories for this unit can be ordered online, by fax, or
by telephone.
To ensure that the unit operates properly, we
recommend the use of Panasonic toner cartridge and
drum cartridge.
■ Replacement accessory
– Toner cartridge
L Model No. (Part No.): KX-FAT451
L Prints about 5,000 pages at ISO/IEC 19752
standard page.
– Drum cartridge
L Model No. (Part No.): KX-FAD452
■ Optional accessory
– Lower input tray
L Model No. (Part No.): KX-FAP106
Note:
L ISO/IEC 19752 standard is as follows:
– Environment: 23 ± 2 °C (73 ± 3 °F) / 50 ± 10% RH
– Print mode: Continuous printing
5 Quick installation guide 6 Power cord
(PNQW1661Z)*2
(PNJA1021Z or
PFJA03A028Z)*2
To place an order online (for customers in the U.S.A.
ONLY)
Visit our web site:
http://www.panasonic.com/mfpsupplies
L For questions regarding online orders:
Email:
customerservice@shop.us.panasonic.com
Telephone: (800) 405-0652
To place an order by fax
Fax: (800) 237-9080
Include:
– your name, shipping address and telephone number
– credit card type, number, expiration date and your
signature
– part number and quantity
7 KX-MB3020 only
Telephone line cord
(PFJA02B002Y)*2
*1 Prints about 1,000 pages at ISO/IEC 19752 standard
page.
*2 Parts numbers are subject to change without notice.
To place an order by telephone
Telephone: (800) 332-5368
(Monday - Friday 9 am to 9 pm, EST.)
Note:
L Save the original carton and packing materials for
future shipping and transportation of the unit.
L After unpacking the product, take care of the packing
materials and/or power plug cap appropriately.
For assistance, please visit http://www.panasonic.com/help
7
1. Introduction and Installation
M {Fax Auto Answer} (KX-MB3020 only)
Finding the Controls
1.3 Button descriptions
AB CD E F G HI J K L
M N
L To turn the auto answer setting ON/OFF (page
46).
{Power Save} (KX-MB3010 only)
L To set the unit to the power save mode manually.
N {Stop}
L To stop an operation or programming session.
L To erase a character/number.
O {Fax} (KX-MB3020 only)
L To switch to fax mode (page 17, 41).
O
P
Q R S T U VW
X
* The pictured model is KX-MB3020.
A {Copy}
L To switch to copy mode (page 17, 34).
B {Scan}
P {Broadcast} (KX-MB3020 only)
L To send a document to multiple parties (page 44).
Q {Manual Broad} (KX-MB3020 only)
L To send a document to multiple parties by using
the dial keypad (page 44).
R Station keys (KX-MB3020 only)
L To use the one-touch dial feature (page 42, 43).
L To switch to scan mode (page 17, 30).
C {Collate}
L To make a collated copy (page 36).
{Directory} (KX-MB3020 only)
L To initiate the navigator directory (page 43, 45).
D {Duplex}
L To make duplex copy (page 36).
E {Contrast}
S Navigator key
L To select desired settings.
L To adjust the volume (KX-MB3020 only) (page
19).
L To search for a stored item (KX-MB3020 only)
(page 43).
T {Set}
L To store a setting during programming.
L To select a contrast when copying (page 34).
L To select a contrast when sending a fax (KXMB3020 only) (page 41).
F {Resolution}
L To select a resolution when copying (page 34).
L To select a resolution when sending a fax (KXMB3020 only) (page 41).
G {Zoom}
L To enlarge or reduce a document when copying
(page 35).
{Quick Scan} (KX-MB3020 only)
L To store a scanned document into memory, and
then send it (page 42).
H {Page Layout}
L To make various page layout copies (page 37).
{Caller ID} (KX-MB3020 only)
L To use Caller ID features (page 51).
U {Lower} (KX-MB3020 only)
L To select station 6–10 for the one-touch dial
feature (page 42, 43).
V {Monitor} (KX-MB3020 only)
L To initiate dialing.
When you press {Monitor} while receiving a call,
you will be able to hear the other party, but the
other party will not be able to hear you.
W {Tone} (KX-MB3020 only)
L To change from pulse to tone temporarily during
dialing when your line has rotary/pulse service.
X {Start}
L To copy a document (page 34).
L To scan a document (push scan) (page 30).
L To send or receive a fax (KX-MB3020 only) (page
41).
I For beep sounds (KX-MB3010 only)
L Key beeps etc. will be heard.
J {Menu}
L To start or exit programming.
K {Redial}{Pause} (KX-MB3020 only)
L To redial the last number dialed. If the line is busy
when you send a fax, the unit will automatically
redial the number 1 time.
L To insert a pause during dialing.
L {Flash} (KX-MB3020 only)
L To access special telephone services or for
transferring extension calls.
8
For assistance, please visit http://www.panasonic.com/help
1. Introduction and Installation
1.4.2 Rear view
1.4 Overview
1.4.1 Front view
A
4 5
1 2 3
B
6
C
k
7
j
D
E
F
H
G
* The pictured model is KX-MB3020.
8
1
2
3
4
5
6
7
8
9
j
9
ADF (Automatic Document Feeder) cover
Document guides
Document tray
Document exit
Document cover
Document entrance
Left cover
Left cover open lever
Standard input tray
Recording paper exit
L The unit can hold up to approximately 100
sheets of printed paper. Remove the printed
paper before the recording paper exit becomes
full.
k A4/letter paper stacker
L We recommend to open the A4/letter paper
stacker when using A4 or letter-size recording
paper. Do not open it when using legal-size
recording paper.
L For A4-size, slide the stacker to the rightmost
position, then open it.
For letter-size, just open the stacker (no need to
slide it).
L The A4/letter paper stacker may not be shown in
all illustrations.
A
B
C
D
E
F
Telephone line jack (KX-MB3020 only)
External telephone jack (KX-MB3020 only)
Speaker (KX-MB3020 only)
USB interface connector
Power switch
LAN interface connector
L 10Base-T/100Base-TX
G LED
H Power inlet
For assistance, please visit http://www.panasonic.com/help
9
1. Introduction and Installation
Installation
1.5 Toner cartridge and drum
cartridge
The supplied toner cartridge is a starter toner cartridge.
Caution:
L Read the following instructions before you begin
installation. After you have read them, open the
drum cartridge protection bag. The drum
cartridge contains a photosensitive drum.
Exposing it to light may damage the drum. Once
you have opened the protection bag:
– Do not expose the drum cartridge to light for
more than 3 minutes.
– Do not touch or scratch the black drum
surface inside of the drum cartridge.
– Do not place the drum cartridge near dust or
dirt, or in a high humidity area.
– Do not expose the drum cartridge to direct
sunlight.
L Do not leave the toner cartridge out of the
protection bag for a long time. It will decrease the
toner life.
L We cannot be responsible for any damage to the
unit or degradation of print quality which may
occur from the use of a non-Panasonic toner
cartridge and drum cartridge.
L Do not add toner to the toner cartridge.
L Do not touch or scratch the black drum or toner
surfaces.
3
4
4 Insert the toner cartridge (5) into the drum cartridge
(6) from the upper angle.
5
6
1 Remove the toner cartridge (1) and drum cartridge
(2) from the protection bags.
1
2
5 Push down the toner cartridge (7) to lock into place.
L Make sure that the triangles (8) match to install
the toner cartridge correctly.
8
7
2 Shake the toner cartridge horizontally more than 5
times.
3 Detach the protective cover (3) from the toner
cartridge, and remove the protective sheet (4) from
the drum cartridge.
10
For assistance, please visit http://www.panasonic.com/help
1. Introduction and Installation
6 Hold the left cover release lever (9), and then pull
open the left cover (j).
7 Install the drum and toner unit (l) by holding the
center handle.
L Make sure that the arrows (m) match to install
the drum and toner unit correctly.
l
9
m
j
k
Caution:
L During or immediately after printing,
the fuser unit (k) gets hot. Wait until
the fuser unit cools down.
8 Close the left cover.
When to replace the toner cartridge and the drum
cartridge
When the display shows the following, replace the toner
cartridge.
For assistance, please visit http://www.panasonic.com/help
11
1. Introduction and Installation
–
–
“TONER LOW”
“TONER EMPTY”
Note:
L To check the drum life and quality, please print the
printer test list (page 98) and refer to page 100 for
information on the drum life. If printing quality is still
poor or “REPLACE DRUM CHANGE SUPPLIES”
appears on the display, replace the toner cartridge
and drum cartridge.
L To ensure that the unit operates properly, we
recommend the use of Panasonic toner cartridge
and drum cartridge. See page 7 for accessory
information.
L See page 100 for information on toner life and drum
life.
Note:
L Be sure to clean all the way to the edge of each
groove.
Waste disposal method
Waste material should be disposed of under conditions
which meet all national and local environmental
regulations.
Toner save feature
If you want to reduce toner consumption, set the toner
save setting to ON (feature #482 on page 57). The toner
cartridge will last approximately 20 % longer. This
feature may lower the print quality.
Cleaning the drum cartridge
Important:
L If the groove of the drum cartridge is dirty, lines
or dirty patterns may appear on printed sheets.
Be sure to remove any toner remaining on the
inside of the drum cartridge to maintain the print
quality.
L A cleaner for the drum cartridge is supplied with the
replacement toner cartridge. If you replace only the
toner cartridge, clean the drum cartridge using the
cleaner.
L Insert the cleaner (n) into the left groove (o) and
move it from side to side at least 3 times to clean the
inside of the drum cartridge. Repeat this for the right
groove (p).
n
o
12
p
For assistance, please visit http://www.panasonic.com/help
1. Introduction and Installation
3 Pinch the right side of the recording paper guide
1.6 Recording paper
The standard input tray unit can hold:
– Up to 520 sheets of 75 g/m2 (20 lb) paper.
– Up to 470 sheets of 80 g/m2 (21 lb) paper.
– Up to 410 sheets of 90 g/m2 (24 lb) paper.
– Up to 100 sheets of 105 g/m2 (28 lb) paper.
– Up to 25 transparencies.*1
– Up to 25 labels.*1
*1 Only when using the unit as a printer. See page 28
for details.
L Please refer to page 99 for information on recording
paper.
L The unit is set for printing letter-size plain paper
by default.
– To use A4 or legal-size paper, change the
recording paper size setting (feature #380 on
page 57).
– To use thin or thick paper, change the
recording paper type setting (feature #383 on
page 57).
1 Pull the standard input tray (1) until it clicks into
place, then pull it completely out, lifting the front part
of the tray.
(2), then slide it to match the paper size mark.
Pinch the front and back recording paper guides (3)
at the same time, then slide them together to match
the paper size mark.
2
3
4 Load the paper, print-side up (4).
Important:
L Push down to lock the plate (5) in the
standard input tray, if it has come up.
5
4
1
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
For assistance, please visit http://www.panasonic.com/help
13
1. Introduction and Installation
L Make sure that the recording paper guides (6)
are at the paper size mark and the recording
paper is under the paper limit mark (7). The
paper should not be loaded over the tab (8).
6
8
Caution for the standard input tray
L Do not drop the standard input tray.
7
L Hold the standard input tray with both hands
when removing or installing. The standard input
tray weighs approximately 4.8 kg (10.6 lb) when
fully loaded with recording paper.
Do not touch the plate (9) on the left side of the
standard input tray.
9
6
5 Insert the standard input tray into the unit, lifting the
front part of the tray. Then push it completely into the
unit.
Approx. 4.8 kg (10.6 lb)
Note:
L If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
L If the standard input tray does not close, the plate in
the standard input tray may not be in the locked
position. Push the paper down and make sure that
the paper is lying flat in the standard input tray.
14
For assistance, please visit http://www.panasonic.com/help
2. Preparation
2 Preparation
2For
Connections
assistance,
and please
Setup visit http://www.panasonic.com/help
2.1 Connections
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
8
9
j
3
5
k
Note:
L Do not place any objects within the following
distance:
– Left side (8): 40 cm (153/4 inches)
– Right side (9) and back side (j): 10 cm (4
inches)
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device (KX-MB3020 only).
L A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone (KX-MB3020 only).
Using surge protectors
L The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (k).
7
6
IMPORTANT NOTICE FOR THE USB
CONNECTION
L DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 23).
1
2
4
* The pictured model is KX-MB3020.
1 Power cord
L Connect to a power outlet
(120 V, 60 Hz).
2 Telephone line cord*1
L Connect to a single telephone line jack (RJ11).
3 [EXT] jack*1
L You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
4 Answering machine (not supplied)*1
5 To the internet
6 Network router/Network hub (not supplied)
L Also connect networked computers.
7 LAN cable (not supplied)
L To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
Using network router/network hub
L We recommend using network routers/network hubs
(6) under secure network environments. Consult
your network administrator for firewall settings, etc.
L The warranty does not cover damage due to security
problems or any disadvantages relating to it.
If the unit shares a single telephone line with a DSL
service (KX-MB3020 only)
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Caller ID (page 51) may not function
properly. Please attach a DSL filter (l) to the telephone
line cord of the unit to prevent this. A DSL filter may be
provided by your DSL service provider.
*1 KX-MB3020 only
l
* The pictured model is KX-MB3020.
For assistance, please visit http://www.panasonic.com/help
15
2. Preparation
2.2 Turning the power switch ON
Turn the power switch to the ON position (1).
1
2.3 Dialing mode (KX-MB3020
only)
If you cannot dial (page 41), change this setting
according to your telephone line service.
{Menu}
{Set}
1 {Menu}
2 Press {#}{1}{2}{0} to display “DIALING MODE”.
3 Press {1} or {2} to select the desired setting.
{1} “PULSE”: For rotary/pulse dial service.
{2} “TONE” (default): For tone dial service.
4 {Set}
5 Press {Menu} to exit.
16
For assistance, please visit http://www.panasonic.com/help
2. Preparation
Document Requirements
2.4 Selecting the operation mode
(Scan/Copy) (Fax: KX-MB3020
only)
2.5 Setting the original
2.5.1 Using the scanner glass
You can select the desired mode by pressing one of the
following buttons.
1
2
* The pictured model is KX-MB3020.
– {Scan}: Select this mode when using the unit as a
scanner (page 30).
– {Copy}: Select this mode when using the unit as a
copier (page 34).
– {Fax} (KX-MB3020 only): Select this mode when
using the unit as a fax machine (page 41).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57) (KX-MB3020 only).
1 Open the document cover (1).
2 Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner to which the m mark points.
3 Close the document cover.
Note:
L Confirm that there are no documents in the
automatic document feeder.
L Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
L If the original is a thick book, do not close the
document cover.
L Confirm that any ink, paste or correction fluid has
dried completely.
L Effective scanning area is as follows:
Effective scanning area
L Shaded area will be scanned.
4 mm
(5/32")
208 mm
(8 3/16")
4 mm
(5/32")
4 mm
(5/32")
348 mm
(13 11/16")
For assistance, please visit http://www.panasonic.com/help
4 mm
(5/32")
17
2. Preparation
Minimum document size
128 mm
(5")
2.5.2 Using the automatic document feeder
1
128 mm
(5")
600 mm
(23 5/8")
Maximum document size
216 mm
(8 1/2")
1 Insert the document (up to 50 pages) FACE UP into
the feeder until a single beep is heard.
Effective scanning area
2 Adjust the width of the document guides (1) to fit
the actual size of the document.
Note:
L Confirm that there are no documents on the scanner
glass.
L Confirm that any ink, paste or correction fluid has
dried completely.
L Remove clips, staples or other fasteners.
L Do not insert the following types of documents (Make
a copy of the document using the scanner glass and
set the copy instead.):
– Chemically treated paper such as carbon or
carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint
L The total height of the documents when laid flat,
must be less than 5 mm (3/16"). If the documents
exceed the capacity of the automatic document
feeder, they may fall or cause a jam in the feeder.
L To set a document with a width of less than 210 mm
(8 1/4"), we recommend using the scanner glass to
copy the original document onto A4 or letter-size
paper, then setting the copied document for better
results.
L Do not set documents that do not satisfy the
requirements of size and weight. Make a copy of the
document using the scanner glass and set the copy.
L Available document size, document weight and
effective scanning area are as follows:
18
4 mm (5/32")
4 mm (5/32")
4 mm (5/32")
4 mm (5/32")
208 mm (8 3/16")
216 mm (8 1/2")
L Shaded area will be scanned.
L When using the unit as a scanner (page 30, 32),
the effective scanning length depends on the
selected paper size.
Document weight
L Single sheet:
45 g/m2 to 90 g/m2 (12 lb to 24 lb)
L Multiple sheets:
60 g/m2 to 80 g/m2 (16 lb to 21 lb)
For assistance, please visit http://www.panasonic.com/help
2. Preparation
Help
Volume
2.6 Help function (KX-MB3020
only)
2.7 Adjusting the volume (KXMB3020 only)
The unit contains helpful information, which can be
printed for reference.
– “BASIC SETTINGS”
– “FEATURE LIST”
– “DIRECTORY”
– “FAX SND/RCV”
– “COPIER”
– “Q and A”
– “ERRORS”
– “REPORTS”
– “CALLER ID”
Important:
L Before adjusting the volume, set the operation
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
{Fax}
{Set} {V}{^}
{Menu}
Ringer volume
While the unit is idle, press {V} or {^}.
L The ringer volume can only be adjusted if there are
no documents in the document entrance.
{Set} {<}{>}
1 Press {Menu} repeatedly to display “HELP”.
2 Press {<} or {>} repeatedly to display the desired
item. i {Set}
3 Press {Menu} to exit.
To turn the ringer OFF
Press {V} repeatedly to display “RINGER OFF= OK?”.
i {Set}
L The unit will not ring.
L To turn the ringer back ON, press {^}.
Monitor volume
While using the monitor, press {V} or {^}.
For assistance, please visit http://www.panasonic.com/help
19
2. Preparation
Initial Programming
2.8 Date and time
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
L If the time has not previously been set, Caller ID will
not adjust the clock.
L You can turn this feature OFF (feature #226 on page
56).
{Menu}
{Fax}
{Set} {<}{>}
* The pictured model is KX-MB3020.
1 {Menu} i {#}{1}{0}{1} i {Set}
M:|
01/D:01/Y:09
TIME: 12:00AM
2 Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2009 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{9} {1}{0} {1}{5}.
M:|
08/D:10/Y:09
TIME: 10:15AM
2. Press {*} repeatedly to select “PM”.
3 {Set}
4 Press {Menu} to exit.
Note:
L To check the current date and time setting, press
{Fax} to temporarily change the unit to the fax mode
(KX-MB3020 only).
L Your unit’s date and time will be used as the header
information for the following:
– When sending as an attached file to email
destination directly from this unit (Scan to email
address) (page 31).
– When sending faxes (page 41) (KX-MB3020
only).
L If the date and time is not set correctly, the other
party will receive an incorrect date and time as their
header. This may confuse the other party.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service (KXMB3020 only)
The date and time will be automatically set according to
the received caller information.
20
For assistance, please visit http://www.panasonic.com/help
2. Preparation
2.9 Your logo (KX-MB3020 only)
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
2.10 Your fax number (KXMB3020 only)
You can program your fax number so that it appears on
the top of each page sent.
{Menu}
{Menu}
{Set} {<}{>}
{Flash}
{Stop}
{Set} {<}{>}
1 {Menu} i {#}{1}{0}{2} i {Set}
LOGO=|
1 {Menu} i {#}{1}{0}{3} i {Set}
NO.=|
2 Enter your logo, up to 30 characters (see page 72 for
character entry). i {Set}
3 Press {Menu} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
character, and make the correction.
L To erase all characters, press and hold {Stop}.
{Stop}
2 Enter your fax number, up to 20 digits.
L
L
L
L
To enter a “+”, press {*}.
To enter a space, press {#}.
To enter a hyphen, press {Flash}.
To erase a number, press {Stop}.
3 {Set}
4 Press {Menu} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
L To erase all numbers, press and hold {Stop}.
For assistance, please visit http://www.panasonic.com/help
21
2. Preparation
2.11 Configuring the unit to
access the LAN
You can print documents, scan documents, receive
faxes or send faxes (KX-MB3020 only) using a computer
on the LAN. To enable these features, you need to set
the IP address, subnet mask, and default gateway for the
unit.
Important:
L Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
2.11.1 Setting up automatically with a
DHCP server
Your situation:
– When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1 After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
L The IP address, subnet mask, and default
gateway will be set automatically.
2 Install Multi-Function Station on the computer that
you want to use it with. See page 23 for details.
Note:
L You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid network access and
configuration troubles.
2.11.2 Setting up manually
Your situation:
– When your network administrator does not manage
the network with a DHCP server.
– When two or more units are connected to the LAN.
2. {Set} i Enter the subnet mask of the network.
i {Set}
For the default gateway:
1. Press {5}{0}{3} to display “DEFAULT
GATEWAY”.
2. {Set} i Enter the default gateway of the
network. i {Set}
5 Press {Menu} to exit.
6 Install Multi-Function Station on the computer that
you want to use it with. See page 23 for details.
To correct a mistake in the IP address, subnet mask,
or default gateway
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
2.11.3 Setting the computer for PC fax
reception (KX-MB3020 only)
You need to select the computer that will be used for
receiving faxes.
Important:
L Make sure the PC fax setting is turned ON
beforehand (feature #442 on page 62).
L Make sure the fax preview mode is turned OFF
beforehand (feature #448 on page 50).
1 {Menu} i {#}{4}{4}{3} i {Set}
2 Press {V} or {^} repeatedly to select the desired
computer. i {Set}
3 Press {Menu} to exit.
Note:
L If the unit is not connected to the LAN, the computer
connected to the unit by USB is assigned as the
default computer for PC fax reception.
L To select the desired computer easily, change the PC
name beforehand (page 25).
You need to assign an IP address, subnet mask, and
default gateway manually.
1
2
3
4
{Menu}
Press {#}{5}{0}{0} to display “DHCP”.
Press {0} to select “DISABLED”. i {Set}
Set each item.
For the IP address:
1. Press {5}{0}{1} to display “IP ADDRESS”.
2. {Set} i Enter the IP address of the unit. i
{Set}
For the subnet mask:
1. Press {5}{0}{2} to display “SUBNET MASK”.
22
For assistance, please visit http://www.panasonic.com/help
2. Preparation
2.12 Installing Multi-Function
Station
2.12.1 Required computer environment
Panasonic Multi-Function Station software enables the
unit to carry out the following functions:
– Printing on plain paper, thin and thick paper,
transparencies and labels
– Scanning documents and converting an image into
text with Readiris OCR software
– Scanning from other applications for Microsoft®
Windows® that support TWAIN scanning and WIA
scanning (Windows XP/Windows Vista®, USB
connection only)
– Storing, editing or erasing items in directories using
your computer (KX-MB3020 only)
– Programming the features using your computer
– Sending, receiving fax documents using your
computer (KX-MB3020 only)
To use Multi-Function Station on your computer, the
following are required:
Operating System:
Windows 98/Windows Me/Windows 2000/Windows
XP/Windows Vista
CPU:
Windows 98/Windows Me/Windows 2000: Pentium® y
or higher processor
Windows XP: Pentium z or higher processor
Windows Vista: Pentium 4 or higher processor
RAM:
Windows 98/Windows Me: 64 MB (128 MB or more
recommended)
Windows 2000/Windows XP: 128 MB (256 MB or more
recommended)
Windows Vista: 512 MB (1,024 MB or more
recommended)
Other Hardware:
CD-ROM drive
Hard disk drive with at least 150 MB of available space
USB interface
LAN interface (10Base-T/100Base-TX)
Other:
Internet Explorer® 5.0 or later
Warning:
L To assure continued emission limit compliance;
– use only shielded USB cable (Example: HiSpeed USB 2.0 certified cable).
– use only shielded LAN cable (category 5 straight
cable).
L To protect the unit, use only shielded USB cable in
areas where thunderstorms occur.
2.12.2 Installing Multi-Function Station on
a computer
L Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
L The screenshots shown in these instructions are
for Windows XP and are included for reference
only.
L The screenshots shown in these instructions
may differ slightly from those of the actual
product.
L Software features and appearance are subject to
change without notice.
L If you are using KX-MB200/KX-MB700/KXFLB880 series, see page 88.
1 Start Windows and exit all other applications.
L For Windows 2000, Windows XP and Windows
Vista users, you must be logged in as an
administrator in order to install Multi-Function
Station.
2 Insert the supplied CD-ROM into your CD-ROM
drive.
L If the [Select Language] dialog box appears,
select the language that you want to use with this
software. Click [OK].
L If the installation does not start automatically:
Click [Start]. Choose [Run...]. Type “D:\Install”
(where “D” is the drive letter of your CD-ROM
drive). Click [OK].
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3 [Easy Installation]
L The installation will start automatically.
4 When the setup program starts, follow the on-screen
instructions.
L Readiris OCR software (page 31) and Device
Monitor (page 73) will also be installed.
5 The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
L The [Connect Device] dialog box will appear.
Note:
L A USB cable is not supplied. Please purchase a
shielded Type-A male/Type-B male USB cable.
For assistance, please visit http://www.panasonic.com/help
23
2. Preparation
2. Connect the unit to a computer with the USB cable
(1), then click [Next].
1
* The pictured model is KX-MB3020.
L If the unit is connected to your computer, the
model name will be automatically detected.
L You can change the name of the unit if necessary.
3. Click [Install], then follow the on-screen
instructions.
L The files will be copied to your computer.
For LAN connection:
1. [Connect via the Network.] i [Next]
L The [Select a Network Device] dialog box will
appear.
2. Check [Select in the searched list] and select the
unit from the list.
L If the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check [Direct input] and enter the IP
address.
3. [Next]
L You can change the name of the unit if necessary.
4. Click [Install], then follow the on-screen
instructions.
L The files will be copied to your computer.
Important notice
If you use Windows XP or Windows Vista, a message
may appear after connecting the unit with the USB
cable. This is normal and the software will not cause
any difficulties with your operating system. You can
continue the installation with no problem. This kind of
message is displayed:
L For Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
L For Windows Vista users
“Would you like to install this device software?”
2. Click [Operating Instructions], then follow the onscreen instructions to view or install the operating
instructions in PDF format.
L Adobe® Reader® is required to view the
operating instructions.
Note:
L If the screen prompts you to insert the CD-ROM for
the operating system when installing Multi-Function
Station, insert it into your CD-ROM drive.
L If you install the operating instructions, you can view
it anytime by clicking [o] on the Multi-Function
Station launcher.
To use another unit with the computer
You need to add the printer driver for each unit, as
follows.
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. [Modify] i [Add Multi-Function Station
Driver]. Then follow the on-screen instructions.
Note:
L You cannot connect more than one unit to the same
computer at the same time (USB connection only).
To modify the software (To add or uninstall each
component)
You can select the components to install or uninstall
anytime after the installation.
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to modify Multi-Function Station.
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. [Modify] i [Modify Utilities]. Then follow the onscreen instructions.
To uninstall the software
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to uninstall Multi-Function Station.
[Start] i [All Programs] or [Programs] i
[Panasonic] i the unit’s name i [Uninstall]. Then
follow the on-screen instructions.
To view or install the operating instructions data
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
24
For assistance, please visit http://www.panasonic.com/help
2. Preparation
2.13 Starting Multi-Function
Station
[Start] i [All Programs] or [Programs] i
[Panasonic] i the unit’s name i [Multi-Function
Station]
L Multi-Function Station will appear.
[n]
L To display information about Multi-Function Station.
Note:
L You can confirm if the unit is connected to your
computer by using Device Monitor (page 73).
L Computer features (printing, scanning, etc.) may not
function properly in the following situations:
– When the unit is connected to a computer that
was custom-built by the user.
– When the unit is connected to the computer via a
PCI card or other expansion card.
– When the unit is connected to another piece of
hardware (such as a USB hub or interface
adapter) and not connected directly to the
computer.
To change the settings
You can change the settings for Multi-Function Station
beforehand.
1. Select [Settings] from Multi-Function Station.
2. Click the desired tab and change the settings. i
[OK]
* The pictured model is KX-MB3020.
[Scan] (page 32)
L To scan and display the scanned images.
L To scan and create an image file.
L To scan and send by email.
L To scan and convert an image into editable text data.
[PC FAX] (KX-MB3020 only)
L To send a document created on the computer as a
fax message (page 46).
L To display a fax document received on the computer
(page 49).
[Remote Control] (page 72)
L To program the features.
L To store, edit or erase items in directories.*1
L To view items in the journal report or Caller ID list.*1
L To store caller information into directories.*1
L To store or erase items for broadcast transmission.*1
*1 KX-MB3020 only
[Utilities]
L To start Multi-Function Viewer (page 32).
L To start Device Monitor (page 73).
L To start OCR application (page 31).
L To start the configuration web page (page 54, 73)
(LAN connection only).
[Settings] (page 25)
L To change the general settings.
L To change the settings for scanning.
[General]
– [Launcher display setting]: To select the display
type of the launcher.
– [OCR Path]: To select the OCR software.
– [PC name list up on device] (LAN connection
only): To select whether or not your computer name
is displayed on the unit.
– [PC name] (LAN connection only): The computer
name that will be displayed on the unit.
[Scan]
– [Save to]: To select the folder where the scanned
image will be saved.
– [Viewer][File][Email][OCR][Custom]: To
change scanning settings for Multi-Function scan
application.
Note:
L Assign a unique name for the [PC name] to avoid
overlapping, or the scanned image may be sent to an
undesired computer.
To select the default Email software
The default Email software is used when using
“4.1.3 Scan to Email”, page 30.
You can select the default Email software as follows.
For Windows 98/Windows Me/Windows 2000:
1. [Start] i [Settings] i [Control Panel] i
[Internet Options] i [Programs] i [E-mail]
2. Select the desired MAPI-compliant Email software
such as [Outlook Express], etc. i [OK]
[o]
L For detailed instructions on Multi-Function Station.
L To view operating instructions.
For Windows XP:
[p]
L To display usage tips.
1. [Start] i [Control Panel] i [Internet
Options] i [Programs] i [E-mail]
For assistance, please visit http://www.panasonic.com/help
25
2. Preparation
2. Select the desired MAPI-compliant Email software
such as [Outlook Express], etc. i [OK]
For Windows Vista:
1. [Start] i [Control Panel] i [Internet
Options] i [Programs] i [Set programs] i
[Set program access and computer defaults]
L If the [User Account Control] dialog box
appears, click [Continue].
2. [Custom]
3. Select the desired MAPI-compliant Email software
such as [Windows Mail], etc. from [Choose a
default e-mail program]. i [OK]
26
For assistance, please visit http://www.panasonic.com/help
3. Printer
3 Printer
Printer
3.1 Printing from Windows
applications
You can print a file created in a Windows application. For
example, to print from WordPad, proceed as follows.
1 Open the document you want to print.
2 Select [Print...] from the [File] menu.
L The [Print] dialog box will appear.
For details about the [Print] dialog box, click
[?], then click the desired item.
* The pictured model is KX-MB3020.
Note:
L For Microsoft PowerPoint®, select [Color] or
remove the check next to [Grayscale] in the
print dialog so that colored text will be printed in
grayscale.
3 Select the unit’s name as the active printer.
L If you have changed the name of the unit when
installing, select that name from the list.
L To change the printer settings, proceed as
follows.
For Windows 98/Windows Me:
Click [Properties], then click the desired tab.
Change the printer settings, then click [OK].
For Windows 2000:
Click the desired tab and change the printer
settings.
For Windows XP/Windows Vista:
Click [Preferences], then click the desired tab.
Change the printer settings, then click [OK].
4 Click [Print] or [OK].
L The unit will start printing.
Note:
L To stop printing from the unit, see page 73.
L To load paper, see page 13.
L For details about the paper specifications, see page
99.
L If a printing error occurs, the Device Monitor (page
73) will start automatically and display the error
information.
Setting the printer properties
You can change the printer setting in step 3. We
recommend that you test paper (especially special sizes
and types of paper) on the unit before purchasing large
quantities.
You can change or display the settings on the following
tabs.
[Basic]: Paper size, media type, duplex, etc.
[Output]: Number of prints, collate, etc.
[Quality]: Quality, contrast, toner save feature, etc.
[Effects]: Watermark, overlay.
[Profile]: Saving the desired settings, selecting the
saved settings, etc.
[Support]: Version information.
Note:
L Select the desired media type on the [Basic] tab
according to the recording paper.
Recording paper type
Media type
Plain paper
75 g/m2 to 90 g/m2
(20 lb to 24 lb)
[Plain Paper]
Thin paper
64 g/m2 to 75 g/m2
(17 lb to 20 lb)
[Thin Paper]
Thick paper
90 g/m2 to 165 g/m2
(24 lb to 44 lb)
[Thick Paper]
Transparency
[Transparency]
Label
[Label]
L When printing from a computer, the printer
properties setting overrides the following unit’s
programming features:
– Media type setting (feature #383 on page 57)
– Toner save setting (feature #482 on page 57)
3.1.1 Duplex printing
For example, to print from WordPad, proceed as follows.
L Plain paper and thin paper can be used.
1 Open the document you want to print.
2 Select [Print...] from the [File] menu.
3 Select the unit’s name as the active printer.
L For Windows 2000 users, go to step 5.
4 For Windows 98/Windows Me:
[Properties]
For Windows XP/Windows Vista:
[Preferences]
5 Click the [Basic] tab.
6 Select the desired duplex layout. i [OK]
L Select [None] to deactivate this feature.
L You can also change the duplex margin.
27
3. Printer
7 Click [Print] or [OK].
3.1.2 Printing on special media
You can print not only on plain paper but also on special
media (transparencies / labels).
L Please refer to page 99 for information on recording
paper.
L To load paper, see page 13.
To print on transparencies
Use transparencies designed for laser printing.
We recommend the following:
3M® CG3300/CG5000
L Do not stack more than 25 transparencies at a
time.
L After printing, place transparencies on a flat
surface to cool and to prevent them from curling.
L Do not re-use transparencies that have already been
fed through the unit. This includes transparencies
that have been fed through and ejected without being
printed on.
L Some types of transparencies have instructions
recommending which side to print on. If the print
quality is poor, try printing on the other side of a new
transparency.
To print on labels
Use labels designed for laser printing. We recommend
the following:
3.2 Printing a received email
attachment automatically (LAN
connection only)
If you configure the POP server settings beforehand, the
unit will automatically print files attached to an email that
are sent from a compatible unit via the Internet (scan to
email print). This is useful if you want to print only
attached files, without checking your emails.
Important:
L The unit does not print email messages.
L The unit will only print attached files sent from a
compatible unit, which can send emails directly
(without using a computer).
L The attachment file formats that can be printed
are as follows:
– TIFF
– JPEG
– PDF (Image type only. Such as files scanned
from the unit, or scanned from the computer
using Multi-Function Viewer.)
L Received emails and the attached files will be
deleted automatically after printing.
A
B
C
Avery®
5160/5161/5162/5163/5164/5165/5167/5168
XEROX®
LWH100/LWH110/LWH120/LWH130/LWH140
L Make sure the print side is FACE UP when
loading the labels.
L Do not stack more than 25 labels at a time.
L Do not use the following types of labels:
– Labels that are wrinkled, damaged or separated
from the backing sheet.
– Any sheet of labels that has spaces in it where
some of the labels have been removed.
– Labels that do not completely cover the backing
sheet as follows:
A Send from a compatible multi-function unit (Example:
“4.1.5 Scan to email address (LAN connection only)”,
page 31)
B Email is sent via the Internet (email server)
C Receiving unit prints attached files
1 Start Multi-Function Station.
2 [Utilities] i [Configuration Web Page] i
[Network Configuration]
3 Type “root” as the user name, then enter the
password (feature #155 on page 56). i [OK]
4 Click the [SCAN TO EMAIL PRINT] tab.
5 Set each item.
To activate this feature:
Select [ENABLED] next to [SCAN TO EMAIL
PRINT]. i [Submit]
To set the email server information:
1. Click [Edit] next to [EMAIL SERVER].
2. Enter the email server and POP server
information. i [Submit]
6 Close the web browser.
28
3. Printer
Note:
L This feature can be programmed only through the
web browser interface (page 54).
L To view the recent scan to email print information,
click [List] next to [EMAIL PRINT LOG] (page 71).
L If the attached file is too large or is in an unsupported
format, it will not be printed properly.
L You can change the email checking interval (page
70) or header print setting (page 71).
L Consult your service provider or network
administrator for details.
29
4. Scanner
4 Scanner
Scanner
4.1 Scanning from the unit (Push
Scan)
You can easily scan the document by using the operation
panel on the unit. You can select one of the following
scanning modes depending on how you intend to use
the scanned image.
– Viewing using Multi-Function Viewer (Viewer)
– Saving as a file to your computer (File)
– Sending as an attached file to email destination from
your computer (Email)
– Using OCR software (OCR)
– Sending as an attached file to email destination
directly from this unit (Email address)
– Sending to an FTP server (FTP)
Note:
L You can set the desired scan mode for push scan
beforehand (feature #493 on page 66).
L When scanning a document, we recommend using
the scanner glass rather than the automatic
document feeder for better results.
L Do not open the document cover when scanning a
document with the automatic document feeder.
{Scan}
Station keys
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5 If necessary, change the scanning settings. Press
{>}, press {V} or {^} repeatedly to select the
desired setting. i {Set}
6 {Start}
L The scanned image will be displayed in the
[Multi-Function Viewer] window after
scanning. However, when you select PDF as a
file format, the software that is associated to
open PDF file will start.
Note:
L To stop scanning, see page 73.
L You can save the images in TIFF, JPEG, BMP or PDF
formats.
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 25).
4.1.2 Scan to save as a file
1 Set the original (page 17).
2 {Scan}
3 Press {V} or {^} repeatedly to select “FILE”. i
{Set}
4 For USB connection:
Press {V} or {^} repeatedly to select “USB HOST”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5 If necessary, change the scanning settings. Press
{>}, press {V} or {^} repeatedly to select the
desired setting. i {Set}
6 {Start}
{Lower}
{Start} {Stop}
{Set}{V}{^}{>}
* The pictured model is KX-MB3020.
4.1.1 Scan to Multi-Function Viewer
1 Set the original (page 17).
2 {Scan}
3 Press {V} or {^} repeatedly to select “VIEWER”. i
{Set}
4 For USB connection:
Press {V} or {^} repeatedly to select “USB HOST”.
i {Set}
L The scanned image will be automatically saved
in the folder selected in the [Settings] window.
To change the folder, see page 25.
Note:
L To stop scanning, see page 73.
L You can save the images in TIFF, JPEG, BMP or PDF
formats.
4.1.3 Scan to Email
You can send the scanned image as an email
attachment using email software on your computer.
1 Set the original (page 17).
2 {Scan}
3 Press {V} or {^} repeatedly to select “EMAIL”. i
{Set}
30
4. Scanner
4 For USB connection:
Press {V} or {^} repeatedly to select “USB HOST”.
i {Set}
4.1.5 Scan to email address (LAN
connection only)
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
You can send the scanned image as an attachment
without using email software.
5 If necessary, change the scanning settings. Press
{>}, press {V} or {^} repeatedly to select the
desired setting. i {Set}
6 {Start}
L The email software will automatically start and
the scanned image will be attached to a new
email message.
Note:
L To select the default email software, see page 25.
L To stop scanning, see page 73.
L You can save the images in TIFF, JPEG or PDF
formats.
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 25).
4.1.4 Scan to OCR
With OCR software, you can convert an image into text
data that can be edited with word processing software.
Readiris OCR software can be installed when installing
Multi-Function Station.
1 Set the original (page 17).
2 {Scan}
3 Press {V} or {^} repeatedly to select “OCR”. i
{Set}
4 For USB connection:
Press {V} or {^} repeatedly to select “USB HOST”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5 If necessary, change the scanning settings. Press
{>}, press {V} or {^} repeatedly to select the
desired setting. i {Set}
6 {Start}
Important:
L Program the email server, SMTP server settings
(page 66) and the email destinations (page 66)
beforehand.
1 Set the original (page 17).
2 {Scan}
3 Press {V} or {^} repeatedly to select “EMAIL
ADDRESS”. i {Set}
4 Enter the destination email address.
Using station 1–5 (KX-MB3020 only):
Press the desired station key.
Using station 6–10 (KX-MB3020 only):
Press {Lower}, then press the desired station key.
Using navigator key:
Press {V} or {^} repeatedly to select the desired
destination.
Using dial keypad:
Press {Set}, then enter the email address using the
dial keypad (page 72).
5 {Set}
6 If necessary, change the scanning settings. Press
{>}, press {V} or {^} repeatedly to select the
desired setting. i {Set}
7 {Start}
L The scanned image will be sent as an email
attachment directly from this unit.
Note:
L To stop scanning, see page 73.
L You can save the images in TIFF, JPEG or PDF
formats.
L You can search for an email address by initial.
Example: “LISA”
1. Perform steps 1 to 3 on “4.1.5 Scan to email
address (LAN connection only)”, page 31.
2. Press {5} repeatedly to display any name with
the initial “L” (see page 72 for character entry).
L To search for symbols, press {*}.
L The scanned image will be displayed in the OCR
window after scanning.
3. Press {V} or {^} repeatedly to display “LISA”.
L To stop the search, press {Stop}.
Note:
L To stop scanning, see page 73.
L You can save the images in TIFF, JPEG or BMP
formats.
L For detailed instructions about OCR, select [Help].
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 25).
L You can easily send scanned image to the desired
destinations using station keys (KX-MB3020 only).
To use this feature, register email addresses to
station keys beforehand (page 66).
1. Set the original (page 17).
31
4. Scanner
2. {Scan}
3. Using station 1–5:
Press the desired station key.
Using station 6–10:
Press {Lower}, then press the desired station
key.
4. {Set} i {Start}
4.1.6 Scan to FTP server (LAN connection
only)
You can send the scanned image to a folder on an FTP
server.
Important:
L Program the FTP server settings beforehand
(page 67).
1 Set the original (page 17).
2 {Scan}
3 Press {V} or {^} repeatedly to select “FTP
SERVER”. i {Set}
4 Press {V} or {^} repeatedly to select the destination
to which you want to send the scanned image. i
{Set}
5 If necessary, change the scanning settings. Press
{>}, press {V} or {^} repeatedly to select the
desired setting. i {Set}
6 {Start}
L The scanned image will be automatically saved
in the selected folder on the FTP server.
Note:
L To stop scanning, see page 73.
L You can save the images in TIFF, JPEG or PDF
formats.
L To display the scanned image, download the data to
your computer beforehand.
4.2 Scanning from a computer
(Pull Scan)
Note:
L When scanning a document, we recommend using
the scanner glass rather than the automatic
document feeder for better results.
L Do not open the document cover when scanning a
document with the automatic document feeder.
4.2.1 Using Multi-Function scan
application
By clicking an application icon, the selected application
starts automatically after scanning.
1 Set the original (page 17).
2 Start Multi-Function Station. i [Scan]
3 Click the desired application icon.
L When you click [Custom], the pre-programmed
application starts.
L To cancel scanning while the documents is being
scanned, click [Cancel].
Note:
L You can change the scanning settings beforehand for
each application (page 25).
L When you point to an application icon, the scanning
settings for that application are displayed as a tooltip.
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 25).
4.2.2 Using Multi-Function Viewer
1 Set the original (page 17).
2 Start Multi-Function Station.
3 [Utilities] i [Viewer]
L [Multi-Function Viewer] will appear.
4 Click the [Scan] icon in the [Multi-Function
Viewer] window.
L The unit’s name dialog box will appear.
5 If necessary, change the scanning settings on your
computer.
L To preview the scanned image, click [Preview].
You can drag the frame to specify the scanning
area. If you change the scan settings, click
[Preview] to refresh the scanned image.
If you use the automatic document feeder, only
the first page will be previewed. When you need
to refresh the scanned image, set the document
to preview again.
6 [Scan]
L If you preview the scanned image using the
automatic document feeder in step 5, set the
document again and click [Scan].
32
4. Scanner
L The scanned image will be displayed in the
[Multi-Function Viewer] window after
scanning.
L To save the scanned image, select [Save As ...]
from the [File] menu.
L To cancel scanning while the document is being
scanned, click [Cancel].
Note:
L You can display images in applications that support
TIFF, JPEG, PCX, DCX and BMP formats.
L You can save images in TIFF, JPEG, PCX, DCX,
BMP or PDF formats.
L If the [Select...] button is displayed in [Target
Device], click [Select...] to select the unit from the
list, and then click [OK].
The [Select...] button will not be displayed when
there is only one printer driver installed.
L You can move, copy and delete a file or page.
4.2.3 Using other applications
Multi-Function Station includes a TWAIN and WIA
compliant scanner driver. You can also scan using other
applications that support TWAIN or WIA scanning. For
scanning example, proceed as follows.
1 Set the original (page 17).
2 Start an application that supports TWAIN or WIA
scanning.
3 For TWAIN scanning:
Select [Acquire Image...] from the [File] menu.
For WIA scanning:
Select [From Scanner or Camera...] from the
[File] menu.
L The unit’s name dialog box will appear.
4 If necessary, change the scanning settings on your
computer. i [Scan]
L The scanned image will be displayed in the
application window after scanning.
L To cancel scanning while the document is being
scanned, click [Cancel].
Note:
L Scanning from WIA compliant applications is only
available for Windows XP and Windows Vista, and
only via a USB connection.
L Depending on the application used, the appearance
may differ slightly.
L If the [Select...] button is displayed in [Target
Device] when performing TWAIN scanning, click
[Select...] to select the unit from the list, and then
click [OK].
The [Select...] button will not be displayed when
there is only one printer driver installed.
33
5. Copier
5 Copier
Copy
5.1 Making a copy
5.1.1 Using the scanner glass
–
–
“TEXT”: For text only.
“PHOTO”: For photographs, shaded drawings,
etc.
2. {Set}
Note:
L You can change the default resolution (feature #461
on page 63).
{Copy}
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press {Contrast} repeatedly. i {Set}
Note:
L You can hold the previous contrast setting (feature
#462 on page 57).
{Contrast}
{Set}{V}{^} {Start}
{Resolution} {Fax Auto Answer} {Stop}
* The pictured model is KX-MB3020.
1 If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 17).
3 If necessary, change the resolution and contrast
according to the type of document.
L To select the resolution, see page 34.
L To select the contrast, see page 34.
4 If necessary, enter the number of copies (up to 99).
5 {Start}
L If the copy input tray prompt (feature #471 on
page 63) is activated, select the desired
recording paper size by pressing {V} or {^}
repeatedly, then press {Start} again.
L The unit will start copying.
6 After you finish copying, press {Stop} to reset the
settings you set in step 3 and 4.
Note:
L To stop copying, see page 73.
L You can change the default operation mode (feature
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57) (KX-MB3020 only).
L If the {Fax Auto Answer} light is ON, the unit can
receive faxes automatically even when in the copy
mode (KX-MB3020 only).
To select the resolution
1. Press {Resolution} repeatedly.
– “TEXT/PHOTO”: For both text and photographs.
34
5. Copier
5.1.2 Using the automatic document feeder
5.2 More copying features
L Make sure that the {Copy} light is ON.
{Copy}
5.2.1 Zoom copy (enlargement / reduction)
1 Set the original (page 17).
2 Press {Zoom} repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
– “ZOOM =100%”*1
– “50%”
– “200%”
{V}{^}
{Start}
{Stop}
1 If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 18).
3 If necessary, change the resolution and contrast
according to the type of document.
L To select the resolution, see page 34.
L To select the contrast, see page 34.
4 If necessary, enter the number of copies (up to 99).
5 {Start}
L If the copy input tray prompt (feature #471 on
page 63) is activated, select the desired
recording paper size by pressing {V} or {^}
repeatedly, then press {Start} again.
L The unit will start copying.
6 After you finish copying, press {Stop} to reset the
settings you set in step 3 and 4.
Note:
L To stop copying, see page 73.
*1 Press {V} or {^} repeatedly to change the zoom
rate by 1 % at a time from “25%” to “400%”.
You can also enter the desired percentage
specifically by using the dial keys.
L Additional zoom rates can be selected according
to the recording paper size setting (feature #380
on page 57 or feature #382 on page 57).
Feature #380/#382
setting
Additional zoom rate
“LETTER”
“A4>LTR”
“LGL>LTR”
“A4”
“LTR>A4”
“LGL>A4”
“LEGAL”
–
3 {Set}
4 If necessary, enter the number of copies (up to 99).
i {Start}
5 After you finish copying, press {Stop} to reset this
feature.
Note:
L Zoom copy is not available for the following features:
– Quick ID copy feature (page 37)
– Easy repeat feature (page 37)
– Poster feature (page 38)
– N in 1 feature (page 38)
– Separate N in 1 feature (page 39)
– Booklet feature (page 39)
L You can hold the previous zoom setting (feature #468
on page 63).
L When using the scanner glass, the unit will only
enlarge the right top corner of the document starting
from the m mark on the unit.
L When using the automatic document feeder, the
unit will only enlarge the center of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
35
5. Copier
Example: 150 % enlarged copy
Using the scanner glass (1):
Original document
L The unit will start copying.
When using the automatic document feeder:
Enlarged copy
{Start}
6 After you finish copying, press {Stop} to reset this
feature.
Example: Making 2 copies of a 4-page original
document
1
4
3
Using the automatic document feeder:
Original document
4
2
4
1
Enlarged copy
3
3
2
4
2
3
1
2
1
Example: 70 % reduced copy
Using the scanner glass (1):
Original document
Collated pages
Reduced copy
1
Using the automatic document feeder:
Original document
Reduced copy
1
Uncollated pages
Note:
L The unit will store the documents into memory while
collating the copies. If memory becomes full while
storing, the unit will only print out the stored pages.
L You can hold the previous collate setting (feature
#469 on page 63).
Proof set feature
To make 1 set of a collated copy first, press {Collate}
repeatedly to display “PROOF SET” (step 2 on
“5.2.2 Collate copy”, page 36). The unit will make 1 set of
a collated copy and stop temporarily so you can check
whether the copy was made as you expected. If the copy
is correct, press {Start} to continue copying.
If the copy is not correct, press {Stop} and start again
from the beginning.
5.2.3 Duplex copy
5.2.2 Collate copy
The unit can collate multiple copies in the same order as
the original document pages.
1
2
3
4
5
Set the original (page 17).
Press {Collate} repeatedly to display “ON”.
{Set}
Enter the number of copies (up to 99).
When using the scanner glass:
1. {Start}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until you have
scanned all pages, and then press {Start}.
36
You can make 2-sided copies of 1-sided documents.
L A4, letter or legal-size recording paper (plain and
thin) can be used.
1 Set the original (page 17).
2 {Duplex}
3 Press {V} or {^} repeatedly to select the desired
binding.
– “LONG EDGE”
5. Copier
–
“SHORT EDGE”
5 Press {V} or {^} repeatedly to select the page layout
from “LANDSCAPE” or “PORTRAIT”. i {Set}
6 If necessary, enter the number of copies (up to 99).
7 Quick ID copy feature:
L Select “OFF” to deactivate this feature.
4 {Set}
5 If necessary, enter the number of documents (up to
99).
6 When using the scanner glass:
1. {Start}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}.
L The unit will start copying.
When using the automatic document feeder:
{Start}
7 After you finish copying, press {Stop} to reset this
feature.
Note:
L Duplex copy is not available for the quick ID copy
feature (page 37), easy repeat feature (page 37) or
poster feature (page 38).
L You can save the previous duplex setting (feature
#470 on page 63).
5.2.4 Quick ID copy feature / Easy repeat
feature (Scanner glass only)
Quick ID copy feature: To copy 2-sided documents
onto one page.
Easy repeat feature: To copy a single document
repeatedly onto one page.
1. {Start}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
L You can press {Start} anytime to start
copying.
Easy repeat feature:
{Start}
8 After you finish copying, press {Stop} to reset this
feature.
For quick ID copy feature
Original document
Page layout
“2 in 1”
“LANDSCAPE”
“PORTRAIT”
“4 in 1”
Note:
L The copied documents will not be reduced to fit the
recording paper, and useful for copying small sized
documents such as business cards.
“LANDSCAPE”
“PORTRAIT”
1 Set the original (page 17).
L To make a landscape copy, set the original in
landscape direction. To make a portrait copy, set
the original in portrait direction.
L The scanning area changes according to the
selected setting in step 4. See the following table
for details. The shaded area will be scanned.
2 {Page Layout}
3 Press {V} or {^} repeatedly to select “QUIK ID
COPY” or “EASY REPEAT”. i {Set}
“8 in 1”
“LANDSCAPE”
“PORTRAIT”
4 Press {V} or {^} repeatedly to select the number of
original documents from “2 in 1”, “4 in 1” or “8
in 1”. i {Set}
L For quick ID copy feature, go to the next step.
L For easy repeat feature, go to step 6.
37
5. Copier
For easy repeat feature
Original document
Page layout
“2 in 1”
1 Set the original (page 17).
2 {Page Layout}
3 Press {V} or {^} repeatedly to select “POSTER”. i
{Set}
4 Press {V} or {^} repeatedly to select “2 × 2” or “3
× 3”. i {Set}
5 If necessary, enter the number of copies (up to 99).
i {Start}
6 After you finish copying, press {Stop} to reset this
feature.
“4 in 1”
Note:
L You can save the previous page layout setting
(feature #467 on page 63).
5.2.6 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1 Set the original (page 17).
“8 in 1”
L To make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2 {Page Layout}
3 Press {V} or {^} repeatedly to select “N in 1”. i
{Set}
4 Press {V} or {^} repeatedly to select the number of
original documents from “2 in 1”, “4 in 1” or “8
in 1”. i {Set}
5 Press {V} or {^} repeatedly to select the layout from
“PORTRAIT” or “LANDSCAPE”. i {Set}
Note:
L You can save the previous page layout setting
(feature #467 on page 63).
5.2.5 Poster feature (Scanner glass only)
You can make copies divided into 4 (“2 × 2”) or 9 (“3 ×
3”) sections to make enlarged copies of the individual
sections. You can then glue them together to make a
poster.
6 If necessary, enter the number of copies (up to 99).
7 When using the scanner glass:
1. {Start}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
L You can press {Start} anytime to start
copying.
When using the automatic document feeder:
{Start}
8 After you finish copying, press {Stop} to reset this
feature.
38
5. Copier
Original document
Page layout
5.2.7 Booklet feature
“2 in 1”
“PORTRAIT”
You can make copies, and then fold them in half to create
booklets. The documents will be reduced to fit the
recording paper.
“LANDSCAPE”
1 Set the original (page 17).
2 {Page Layout}
3 Press {V} or {^} repeatedly to select “BOOKLET”.
i {Set}
“4 in 1”
“PORTRAIT”
4 Press {V} or {^} repeatedly to select the desired
binding direction from “LEFT BIND” or “RIGHT
BIND”. i {Set}
5 Press {V} or {^} repeatedly to select the desired
“LANDSCAPE”
“8 in 1”
“PORTRAIT”
binding pages.
– “1”: To make a booklet with every 4 documents
printed as separate blocks.
– “ALL”: To make a booklet with all documents
printed as 1 block.
6 {Set}
7 If necessary, enter the number of documents (up to
99).
L Multiple copies will be collated automatically.
“LANDSCAPE”
8 When using the scanner glass:
1. {Start}
L The unit will scan 1 page.
2. Place the next page on the scanner glass and
press {Set}. Repeat this until you have scanned
all pages.
Note:
L You can save the previous page layout setting
(feature #467 on page 63).
3. If “1” is selected in step 5, the unit will start
copying.
L You can press {Start} anytime to start
copying.
L For multiple copies, press {Start} to start
copying.
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the “2 in 1” and “4 in 1”
settings.
When using the automatic document feeder:
1. Set the original (page 17).
{Start}
2. {Page Layout}
3. Press {V} or {^} repeatedly to select “SEPARATE N
in 1”. i {Set}
4. Press {V} or {^} repeatedly to select the number of
original documents from “2 in 1” or “4 in 1”. i
{Set}
5. Press {V} or {^} repeatedly to select the page layout
of the original document from “PORTRAIT” or
“LANDSCAPE”. i {Set}
6. If necessary, enter the number of documents (up to
99). i {Start}
7. After you finish copying, press {Stop} to reset this
feature.
If “ALL” is selected in step 5, press {Start} to
start copying.
9 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 63).
5.2.8 Copy reservation
You can make a copy reservation under the following
conditions:
– while the unit is printing documents from your
computer.
– while the unit is printing received fax documents (KXMB3020 only).
1 Set the original (page 17).
39
5. Copier
2 While “PC PRINTING” or “PRINTING” (KXMB3020 only) is displayed, press {Copy}.
3 Make necessary settings such as number of copies,
resolution, zoom features and page layout features.
i {Start}
L “COPY RESERVED” will be displayed. The unit
will start copying after the current printing job.
40
6. Fax (KX-MB3020 only)
6 Fax (KX-MB3020
Sending
Faxes
only)
6.1 Sending a fax manually
6.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper that cannot be sent with the
automatic document feeder.
–
–
–
–
“STANDARD”: For normal-sized characters.
“FINE”: For small-sized characters.
“SUPER FINE”: For very small-sized characters.
“PHOTO”: For photographs, shaded drawings,
etc.
2. {Set}
L Using the “FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press {Contrast} repeatedly. i {Set}
{Fax}
Note:
L You can save the previous contrast setting (feature
#462 on page 57).
To redial the last number
{Redial}
L If the line is busy, the unit will automatically redial the
number 1 time.
Note:
L To stop sending, see page 73.
{Contrast}
{Set}
{Resolution}
{Start}
{Redial}
{Quick Scan}
1 If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2 Set the original (page 17).
3 If necessary, change the resolution and contrast
according to the type of document.
L To select the resolution, see page 41.
L To select the contrast, see page 41.
4 Dial the fax number.
L To send a single page, go to step 7.
L To send multiple pages, go to the next step.
5 Press {Quick Scan} to scan the document into
memory.
L Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
6 Place the next page on the scanner glass. i {Set}
L To send more pages, repeat this step.
7 {Start}
Note:
L To stop sending, see page 73.
L You can change the default operation mode (feature
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57).
To select the resolution
1. Press {Resolution} repeatedly.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit is
just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad, onetouch dial or navigator directory.
3. When using the scanner glass, press {Quick
Scan}. The unit will scan 1 page. Place the next
document on the scanner glass and press {Set}.
Repeat this until all the documents are scanned, then
press {Start}.
When using the automatic document feeder,
press {Start}.
L If the document exceeds the memory capacity, the
reservation for that document will be canceled. You
must send the entire document manually.
Printing a confirmation report
A confirmation report provides you with a printed record
of transmission results. To print confirmation reports,
make sure feature #401 is activated (page 59). For an
explanation of error messages, see page 76.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see page 98.
To print it automatically after every 30 new fax
transmissions and receptions, make sure feature #402 is
41
6. Fax (KX-MB3020 only)
activated (page 59). For an explanation of error
messages, see page 76.
6.1.2 Using the automatic document feeder
6.2 Storing items for the onetouch dial feature and navigator
directory
The unit provides the one-touch dial feature (10 items)
and navigator directory (300 items).
L Station 1 to 3 can be used alternatively as broadcast
keys (page 44).
L Make sure that the {Fax} light is ON.
{Fax}
{Directory}
{Set}
{Menu}
{Monitor}
{Quick Scan}
{Start}
{Fax} Station keys
{Lower}
{Stop}
{V}{^}{>}
1 If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2 Set the original (page 18).
3 If necessary, change the resolution and contrast
according to the type of document.
L To select the resolution, see page 41.
L To select the contrast, see page 41.
4 {Monitor}
5 Dial the fax number. i {Start}
Note:
L To stop sending, see page 73.
L Do not open the document cover when sending a fax
with the automatic document feeder.
6.2.1 Storing one-touch dial item
1 Press {Menu} repeatedly to display “DIRECTORY
SET”.
2 Select the desired station key.
For station 1–3:
1. Press the desired station key.
2. Press {V} or {^} repeatedly to select “DIAL
MODE”. i {Set}
For station 4–5:
Press the desired station key.
Pre-dialing a fax number
For station 6–10:
1. Enter the fax number.
Press {Lower}, then press the desired station key.
2. Set the original (page 18). i {Start}
3 Enter the name, up to 16 characters (see page 72 for
Sending from memory (Quick scan feature)
4 Enter the telephone number, up to 32 digits. i
1. Set the original (page 18).
2. Enter the fax number. i {Quick Scan}
character entry). i {Set}
{Set}
L To program other items, repeat steps 2 to 4.
5 {Stop}
Note:
L A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.2 Storing navigator directory items
1 Press {Menu} repeatedly to display “DIRECTORY
SET”. i {>}
2 Enter the name, up to 16 characters (see page 72 for
character entry). i {Set}
42
6. Fax (KX-MB3020 only)
3 Enter the telephone number, up to 32 digits. i
{Set}
L To program other items, repeat steps 2 to 3.
4 {Menu}
Note:
L A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.3 Editing a stored item
1 {Directory}
2 Press {V} or {^} repeatedly to display the desired
item. i {Menu} i {*}
3 Edit the name if necessary. i {Set}
4 Edit the telephone number if necessary. i {Set}
i {Stop}
6.3 Sending a fax using onetouch dial feature and navigator
directory
Before using this feature, store the desired names and
telephone numbers into the one-touch dial feature and
navigator directory (page 42).
L Make sure that the {Fax} light is ON.
6.3.1 Using the scanner glass
1 Set the original (page 17).
2 If necessary, change the resolution (page 41) and
the contrast (page 41).
3 Enter the fax number.
Using station 1–5:
6.2.4 Erasing a stored item
Press the desired station key.
1 {Directory}
2 Press {V} or {^} repeatedly to display the desired
Using station 6–10:
item. i {Menu} i {#}
L To cancel erasing, press {Stop}.
3 {Set} i {Stop}
Press {Lower}, then press the desired station key.
Using navigator directory:
Press {Directory}, then press {V} or {^} repeatedly
to display the desired item.
L To send a single page, go to step 6.
L To send multiple pages, go to the next step.
4 Press {Quick Scan} to scan the document into
memory.
5 Place the next page. i {Set}
L To send more pages, repeat this step.
6 {Start}
To search for a name by initial
Example: “LISA”
1. {Directory}
2. Press {V} or {^} to initiate the navigator directory.
3. Press {5} repeatedly to display any name with the
initial “L” (see page 72 for character entry).
L To search for symbols, press {*}.
4. Press {V} or {^} repeatedly to display “LISA”.
L To stop the search, press {Stop}.
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 1 time.
Note:
L To stop sending, see page 73.
6.3.2 Using the automatic document feeder
1 Set the original (page 18).
2 If necessary, change the resolution (page 41) and
the contrast (page 41).
43
6. Fax (KX-MB3020 only)
3 Enter the fax number using one-touch dial or
navigator directory.
4 {Start}
6.4 Broadcast transmission
You can send the same document to multiple parties (up
to 20). To use this feature, store the fax numbers into
broadcast memory as follows.
Broadcast: Store items using one-touch dial or
navigator directory (page 42).
Manual broadcast: Store items using one-touch dial or
navigator directory (page 42). You can also use the dial
keypad to store items manually.
Your programmed items will remain in the broadcast
memory, allowing frequent re-use.
L The broadcast function utilizes station 1–3. The onetouch dial function will be canceled.
L Make sure that the {Fax} light is ON.
6.4.1 Programming items into the
broadcast memory
1 Press {Menu} repeatedly to display “DIRECTORY
SET”.
2 Select the desired broadcast key.
For BROADCAST 1–2:
1. {Broadcast}
2. Press {V} or {^} repeatedly to select
“BROADCAST”.
For MANUAL BROADCAST:
1. {Manual Broad}
2. Press {V} or {^} repeatedly to select “MANUAL
BROAD”.
3 {Set}
4 Program items.
Using station 1–5:
Press the desired station key.
Using station 6–10:
Press {Lower}, then press the desired station key.
Using navigator directory:
Press {V} or {^} repeatedly to display the desired
item. i {Set}
Using the dial keypad (only for manual broad):
Enter the fax number. i {Set}
L The number in brackets indicates the number of
registered items.
L To program other items, repeat this step (up to 20
items).
L If you have programmed the wrong item, press
{Stop} to erase the item.
5 {Set}
L To program another broadcast key, repeat steps
2 to 5.
6 {Stop}
44
6. Fax (KX-MB3020 only)
6.4.2 Adding a new item into the broadcast
memory
1 {Directory}
2 Press {V} or {^} repeatedly to display the desired
broadcast memory location (“<BROADCAST1>”,
“<BROADCAST2>” or “<MANUAL BROAD>”). i
{Menu} i {*}
3 Press {V} or {^} repeatedly to display the item you
L After transmission, the unit will automatically print a
report (broadcast sending report).
To send the same document using the automatic
document feeder
1. Set the original (page 18).
2. If necessary, change the resolution (page 41) and
the contrast (page 41).
3. Press {Broadcast} (1–2) or {Manual Broad}.
want to add. i {Set}
L To add other items, repeat this step (up to 20
items).
4 {Stop}
Note:
L When adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
6.4.3 Erasing a stored item from the
broadcast memory
1 {Directory}
2 Press {V} or {^} repeatedly to display the desired
broadcast memory location (“<BROADCAST1>”,
“<BROADCAST2>” or “<MANUAL BROAD>”). i
{Menu} i {#}
3 Press {V} or {^} repeatedly to display the item you
want to erase.
L To cancel erasing, press {Stop}.
4 {Set} i {Set} i {Stop}
6.4.4 Sending the same document to preprogrammed parties
To send the same document using the scanner glass
1. Set the original (page 17).
2. If necessary, change the resolution (page 41) and
the contrast (page 41).
3. Press {Broadcast} (1–2) or {Manual Broad}.
L To send a single page, go to step 5.
L To send multiple pages, go to the next step.
4. Place the next page. i {Set}
L To send more pages, repeat this step.
5. {Start}
Note:
L To stop sending, see page 73.
L If you select “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
send will decrease.
L If the document exceeds the memory capacity,
sending will be canceled.
L If a party is busy or does not answer, it will be skipped
and redialed later 1 time.
45
6. Fax (KX-MB3020 only)
Receiving Faxes
6.5 Sending a computer
document as a fax message from
your computer
You can access the fax function from a Windows
application using Multi-Function Station.
For example, to send a document created from
WordPad, proceed as follows.
1 Open the document you want to send.
2 Select [Print...] from the [File] menu.
L The [Print] dialog box will appear.
6.6 Receiving a fax automatically
– Auto answer ON
6.6.1 Activating FAX ONLY mode
Press {Fax Auto Answer} repeatedly to display “FAX
ONLY MODE”.
L The display will show the ring count in FAX ONLY
mode. If you wish to change it, press {V} or {^}
repeatedly to display the desired setting, and press
{Set}.
L The {Fax Auto Answer} light turns ON.
3 Select the PCFAX unit’s name as the active printer.
4 Click [Print] or [OK].
L The [Send a Fax] dialog box will appear.
{Set}{V}{^}
5 Enter the fax number using the keypad display or the
directory.
L To stop the operation, click [Cancel].
6 [Send]
L The document will be sent through the unit from
your computer.
Note:
L To stop sending, see page 73.
L If the document exceeds the memory capacity of the
unit, sending will be canceled.
L For details, see the help file by selecting [p] from
Multi-Function Station.
L Click [Select...] to change the active unit.
46
How faxes are received
When receiving calls, the unit will automatically answer
all calls and only receive fax documents.
Note:
L The number of rings before a call is answered in FAX
ONLY mode can be changed (feature #210 on page
56).
If you have subscribed to a Distinctive Ring service
See page 53.
6. Fax (KX-MB3020 only)
6.7 Receiving a fax manually –
Auto answer OFF
Important:
L Use this mode with an extension telephone.
6.7.1 Activating TEL mode
Set the unit to TEL mode by pressing {Fax Auto
Answer} repeatedly to display “TEL MODE”.
L The {Fax Auto Answer} light turns OFF.
6.8 Using the unit with an
answering machine
6.8.1 Setting up the unit and an answering
machine
1 Connect the answering machine (1).
L An answering machine is not supplied.
L Remove the stopper (2) if attached.
2
Note:
L If you do not answer the call within 10 rings, the unit
will temporarily switch to fax reception. The other
party can then send a fax.
How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (default fax activation code)
firmly.
3. Replace the handset.
Note:
L To stop receiving, see page 73.
L To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 61) beforehand. The
default setting is ON.
1
2 Set the number of rings on the answering machine to
4 rings or less.
L This will allow the answering machine to answer
the call first.
3 Record a greeting message on the answering
machine.
L We recommend you record a message that is
under 10 seconds long, and not to pause for
more than 4 seconds during the message.
Otherwise, both machines will not function
correctly.
4 Activate the answering machine.
5 Set the unit to the desired receiving mode (page 46).
L If you set it to FAX ONLY mode, change the ring
setting in FAX ONLY mode to “5 EXT. TAM”
(feature #210 on page 56).
6 Make sure each of the following are unique:
–
–
–
the remote access code of the answering
machine
the fax activation code (feature #434 on page 61)
remote access to your phone company’s Voice
Mail (if you subscribed)
47
6. Fax (KX-MB3020 only)
Note:
L If the call is a phone call, the answering machine will
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
L Regarding the remote access code for the answering
machine, see the operating instructions of the
answering machine.
Receiving a voice message and fax document in one
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
1. The caller calls your unit.
L The answering machine will answer the call.
2. The caller can leave a message after the greeting
message.
3. The caller presses {*}{#}{9} (pre-selected fax
activation code).
L The unit will activate the fax function.
4. The caller presses the start button to send a
document.
Note:
L To use this feature, make sure remote fax activation
is turned ON (feature #434 on page 61). The fax
activation code can also be changed.
L If there is no room left in the memory of your
answering machine, the unit may not be able to
receive documents. See the operating instructions of
the answering machine and erase unnecessary
messages.
6.9 Junk fax prohibitor
(preventing fax reception from
undesired callers)
If you subscribe to Caller ID service (page 51), this
feature prevents fax reception from calls that do not
show caller information.
Additionally, the unit will not accept faxes originating
from numbers that match the ones on a programmable
junk fax prohibitor list.
Important:
L This feature does not work if you receive faxes
manually.
6.9.1 Activating the junk fax prohibitor
1 Press {Menu} repeatedly to display “JUNK FAX
PROH.”. i {>}
2 Press {V} or {^} repeatedly to select “ON”. i
{Set}
3 Press {Stop} to exit.
6.9.2 Storing undesired callers
You can register up to 20 undesired numbers from the
Caller ID list (page 51) if you do not wish to receive faxes
from them.
1 Press {Menu} repeatedly to display “JUNK FAX
PROH.”.
2 Press {>} repeatedly to display “JUNK LIST SET”.
i {Set}
3 Press {V} or {^} repeatedly to display the party you
do not want to receive faxes from. i {Set}
4 Press {Stop} 2 times to exit.
To display the junk fax prohibitor list
1. Press {Menu} repeatedly to display “JUNK FAX
PROH.”.
2. Press {>} repeatedly to display “JUNK LIST
DISP.”. i {Set}
3. Press {V} or {^} to display the items on the list.
4. Press {Stop} to exit.
To print the junk fax prohibitor list
1. Press {Menu} repeatedly to display “JUNK FAX
PROH.”.
2. Press {>} repeatedly to display “JUNK LIST
PRINT”. i {Set}
3. Press {Stop} to exit.
To erase an item from the junk fax prohibitor list
1. Press {Menu} repeatedly to display “JUNK FAX
PROH.”.
48
6. Fax (KX-MB3020 only)
2. Press {>} repeatedly to display “JUNK LIST
DISP.”. i {Set}
3. Press {V} or {^} repeatedly to display the desired
item. i {<}
L To cancel erasing, press {Stop}, then press
{Menu}.
4. {Set} i {Menu}
6.10 Receiving a fax on your
computer
You can receive a fax document on your computer. The
received fax document is saved as an image file (TIFFG4 format).
Important:
L Make sure the PC fax setting is turned ON
beforehand (feature #442 on page 62).
L Make sure the computer setting for the PC fax
reception is set beforehand (feature #443 on
page 22).
L Make sure the fax preview mode is turned OFF
beforehand (feature #448 on page 50).
1 Press {Fax Auto Answer} repeatedly to turn the
auto answer setting ON (page 46).
2 Start Multi-Function Station. i [PC FAX]
3 When a fax call is received, your computer will
receive a document through the unit.
Note:
L You can view, print or transfer the received document
using your computer.
Viewing a received document
1. Select [PC FAX] from Multi-Function Station.
2. Select [Received Log] in [Communication Log].
3. Click the item you want to view.
4. Click [File] in the menu bar, then select [View], or
click the [View] icon in the toolbar.
L The received fax will be displayed.
If a received fax document is stored in the unit’s
memory
You can load the document into your computer.
1. Select [PC FAX] from Multi-Function Station.
2. Select [Received Log] in [Communication Log].
3. Click [File] in the menu bar. i [Receive a Fax]
L If the PC fax setting (feature #442 on page 62) is
activated, the received fax document will be
automatically transferred to the computer.
49
6. Fax (KX-MB3020 only)
5 Enter the web fax preview access code (feature
6.11 Web fax preview (LAN
connection only)
You can display a received fax document on the web
browser, and print or save the necessary document after
you confirm the image.
Important:
L Web fax preview will not be activated when using
the unit for the first time. To activate this feature,
set the following:
– “6.11.1 Activating the fax preview mode”,
page 50.
– “6.11.2 Programming the web fax preview
access code”, page 50.
6.11.1 Activating the fax preview mode
1 {Menu} i {#}{4}{4}{8}
2 Press {1} to select “ON”.
L Press {0} to select “OFF”.
3 {Set} i {Menu}
Note:
L If you select “ON”, the PC fax setting (feature #442
on page 62) will be deactivated.
6.11.2 Programming the web fax preview
access code
1 {Menu} i {#}{4}{5}{0} i {Set}
2 Enter the password (feature #155 on page 56). i
{Set}
3 Enter the web fax preview access code, up to 8
characters, using the English alphabet and numbers
(see page 72 for character entry).
L The following symbols can also be entered.
!@#$%^&')(.-_{}
4 {Set} i {Menu}
Note:
L If the web fax preview access code is not
programmed (blank), the web fax preview feature will
not be activated.
6.11.3 Displaying a received fax document
on the web browser
Important:
L Make sure that the unit is idle.
1 Start Multi-Function Station.
2 [Utilities] i [Configuration Web Page] i
[Device Configuration]
3 Type “root” as the user name, then enter the
password (feature #155 on page 56). i [OK]
4 Select the [WEB FAX PREVIEW] tab.
50
#450 on page 50). i [Submit]
L A list of the received fax documents will be
displayed.
6 Click the desired icon to preview, print or save a fax
document.
L While previewing the document, you can handle
the fax document (Example: enlarge, rotate etc.).
7 Close the web browser.
Note:
L The display speed depends on the contents and size
of the document.
L The received fax document is saved as an image file
(PDF format). Adobe Reader is required to view it.
What “,” means
“,” on the display means the image has already been
viewed, printed or saved.
L To delete a document after viewing a fax document in
step 6, click [Back] to go back to the list. You can
delete images showing “,”.
L To delete a document after printing or saving a fax
document in step 6, click [Reload] to update the list.
You can delete images showing “,”.
7. Caller ID (KX-MB3020 only)
7 Caller
Caller
IDID (KX-MB3020 only)
7.1 Caller ID service
This unit is compatible with the Caller ID service
offered by your local telephone company. To use this
unit’s Caller ID features, you must subscribe to a
Caller ID service.
Make sure the following ring count is set to 2 or more
rings beforehand.
–
FAX ring count (feature #210 on page 56)
L The name display service may not be available in
some areas. For further information, please contact
your telephone company.
7.1.1 How Caller ID is displayed
The calling party’s name or telephone number will be
displayed after the 1st ring. You have the option of
whether or not to answer the call.
The unit will automatically store caller information
(name, telephone number and date and time of the call)
from the 30 most recent calls. It is possible to view caller
information on the display (page 51) or print the entire
Caller ID list (page 98).
L When caller information is received and it matches a
telephone number stored in the unit’s one-touch dial
or navigator directory, the stored name will be
displayed.
L If the unit is connected to a PBX (Private Branch
Exchange) system, caller information may not be
received properly. Consult your PBX supplier.
L If the unit cannot receive caller information, the
following will be displayed:
“OUT OF AREA”: The caller dialed from an area
which does not provide Caller ID service.
“PRIVATE CALLER”: The caller requested not to
send caller information.
“LONG DISTANCE”: The caller made a long distance
call.
To confirm caller information by printing the Caller
ID list
– To print manually, see page 98.
– To print automatically after every 30 new calls,
activate feature #216 (page 56).
7.2 Viewing and calling back
using caller information
1 If the {Fax} light is OFF, turn it ON by pressing
{Fax}. i {Caller ID}
2 Press {V} to search from the recently received caller
information.
L If you press {^}, the display order will be
reversed.
L To send a fax, see page 41.
To change the way caller information is displayed
While displaying the desired caller information, press
{Caller ID} repeatedly to change name/telephone
number information.
7.2.1 Symbols and operations for caller
information
What “,” means
“,” on the display means the call has already been
viewed or answered.
To stop viewing
Press {Stop}.
To edit a telephone number before calling
back/storing
While displaying a desired caller information, press {*}
repeatedly. Each time you press {*}, the telephone
number will be changed as follows:
A 1 – Area code – Local telephone number (“1”
added)*1
B Local telephone number only (area code omitted)
C Area code – Local telephone number*1
D 1 – Local telephone number (“1” added and area code
omitted)
*1 If the received caller information does not include an
area code, this pattern is not available.
L To store the number in one-touch dial or navigator
directory, follow from step 3 of the storing procedure
on page 52.
51
7. Caller ID (KX-MB3020 only)
7.3 Erasing caller information
7.4 Storing caller information
7.3.1 Erasing all caller information
7.4.1 Storing in the one-touch dial feature
and navigator directory
1 Press {Menu} repeatedly to display “CALLER
SETUP”. i {Set}
L “CALL LIST ERASE” will be displayed.
2 {Set}
L To cancel erasing, press {Stop}, then {Menu}.
3 {Set} i {Stop}
7.3.2 Erasing specific caller information
L Make sure that the {Fax} light is ON.
1 {Caller ID}
2 Press {V} or {^} repeatedly to display the desired
item. i {<} i {Set} i {Stop}
L Make sure that the {Fax} light is ON.
1 {Caller ID}
2 Press {V} or {^} repeatedly to display the desired
item.
3 {Menu}
4 Select the station key or navigator directory.
For station 1–3:
1. Press the desired station key.
2. Press {V} or {^} repeatedly to select “DIAL
MODE”. i {Set} i {Set}
For station 4–5:
Press the station key. i {Set}
For station 6–10:
Press {Lower}, then press the desired station key.
i {Set}
For navigator directory:
Press {<} or {>}. i {Set}
5 {Set}
Note:
L To edit a name or number, see page 43.
L If you assign an item to a station key which already
contains an item, the previous item will be replaced.
L Station 1 to 3 can be used alternatively as broadcast
keys (page 44).
52
8. Distinctive Ring (KX-MB3020 only)
8 Distinctive
Distinctive
Ring
Ring (KX-MB3020 only)
8.1 Distinctive Ring service
When a call is made to one of your phone numbers, the
telephone company sends a ring pattern to your
telephone line to indicate which number the call is
intended for. By setting up this unit for Distinctive Ring,
you can make the unit automatically start fax reception
when a call comes to the fax number.
To use this service, you must subscribe to the
Distinctive Ring service offered by your local
telephone company. Consult your local telephone
company for availability.
8.2 Using two or more phone
numbers on a single telephone
line
8.2.1 Activating the Distinctive Ring
feature
To use one phone number for the fax, program the ring
pattern assigned for the fax (feature #431 on page 53). In
the example, the ring pattern assigned for fax is a triple
ring, so you should program “C” (triple ring).
Ring pattern
Selection
Standard ring (one long ring)
{1} “A”
1st ring
2nd ring
Double ring (two short rings)
1st ring
2nd ring
Triple ring (short-long-short
rings)
1st ring
{3} “C”
2nd ring
Other triple ring (short-short-long
rings)
1 {Menu} i {#}{4}{3}{0}
2 Press {1} to select “ON”.
{2} “B”
{4} “D”
L Press {0} to select “OFF”.
3 {Set} i {Menu}
1st ring
Note:
L While the Distinctive Ring feature is activated, you
cannot change the receiving mode.
How phone calls and faxes are received
If the incoming call is for the fax number, the unit will ring
with the assigned ring pattern and automatically start fax
reception.
If the incoming call is for the phone number, the unit will
continue ringing.
L If an external telephone answering machine is
connected, set the ring count of the answering
machine to more than 2.
2nd ring
Note:
L The default setting is {5} “B-D”. The fax will respond
to all calls with ring tone patterns “B”, “C” and “D”.
8.4 Programming the ring pattern
assigned for fax
1 Set feature #430 to “ON” (page 53).
2 {Menu} i {#}{4}{3}{1}
3 Press {1} to {5} to select the ring pattern assigned
for fax. i {Set} i {Menu}
8.3 Using three or more phone
numbers on a single telephone
line
You may wish to use three or more phone numbers for a
single telephone line. In order to distinguish which
number the call was addressed to, a different ring
pattern must be assigned for each number.
Example: Using three phone numbers
Telephone
number
Ring pattern
Use
012 1234
Standard ring
Personal
012 5678
Double ring
Business
012 9876
Triple ring
Fax
53
9. Programmable Features
9 Programmable
Features
Summary
Features
9.1 Programming
{Menu}
{Set}
1 {Menu}
2 Press {#} and the 3-digit code (page 55 to page
69).
3 Press the appropriate selection to display the
desired setting.
L This step will vary depending on the feature.
4 {Set}
5 Press {Menu} to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[Device Configuration]: features of the unit
[Network Configuration]: network features
3. Type “root” as the user name, then enter the
password (feature #155 on page 56). i [OK]
4. Select the desired feature tab at the top of the right
frame.
5. Change the settings or edit information.
L This step will vary depending on the feature.
6. [Submit]
L The new data will be transferred to the unit.
7. Close the web browser.
Note:
L The settings displayed in the web browser will be
updated by clicking [Reload].
54
9. Programmable Features
9.2 Basic features
Feature/Code
Selection
Setting the quick setup
{#}{1}{0}{0}
(KX-MB3020 only)
You can print out the quick fax setup guide and select the desired receiving
mode depending on your situation.
{1} “FAX ONLY” (default): Use only as a fax (page 46).
{2} “DIST. RING”: With the Distinctive Ring service (page 53).
{3} “EXT. TAM”: With an external telephone answering machine (page 47).
{4} “EXT. TEL”: Mostly phone calls (page 47).
1. {Menu} i {#}{1}{0}{0}
2. {Set}
3. Press {Set} again to print the quick fax setup guide.
L If you do not wish to print it, press {Stop}.
4. Press {1} to {4} to display the desired setting.
5. {Set} i {Menu}
Setting the date and time
{#}{1}{0}{1}
Enter the date and time using the dial keypad. See page 20 for details.
Setting your logo
{#}{1}{0}{2}
(KX-MB3020 only)
Enter your logo using the dial keypad. See page 21 for details.
Setting your fax number
{#}{1}{0}{3}
(KX-MB3020 only)
Enter your fax number using the dial keypad. See page 21 for details.
Selecting the language
{#}{1}{1}{0}
The display and reports will be in the selected language.
{1} “ENGLISH” (default): English is used.
{2} “SPANISH”: Spanish is used.
1. {Menu} i {#}{1}{1}{0}
2. Press {1} or {2} to select the desired language. i {Set} i {Menu}
Setting the dialing mode
{#}{1}{2}{0}
(KX-MB3020 only)
{1} “PULSE”
{2} “TONE” (default)
See page 16 for details.
Setting flash time
{#}{1}{2}{1}
(KX-MB3020 only)
The flash time depends on your telephone exchange or host PBX.
{0} “900ms”
{1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “200ms”
{7} “160ms”
{8} “110ms”
{9} “100ms”
{*} “90ms”
{#} “80ms”
Note:
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
{#}{1}{4}{5}
{1} “NORMAL” (default)
{2} “DARKER”
55
9. Programmable Features
Feature/Code
Selection
Changing the password for
feature programming via
remote operation
{#}{1}{5}{5}
2. Enter the current password. i {Set}
L The default password is “1234”.
1. {Menu} i {#}{1}{5}{5} i {Set}
3. Enter a new 4-digit password using 0–9. i {Set}
4. Enter the new password again. i {Set} i {Menu}
Note:
L It is recommended that you change this password from the default
password.
L This password is also used for feature programming via a web browser.
Setting the toner
maintenance time
{#}{1}{5}{8}
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. {Menu} i {#}{1}{5}{8} i {Set}
2. Enter the maintenance start time.
L The default time is “12:00AM”.
L Press {*} repeatedly to select “AM” or “PM”.
3. {Set} i {Menu}
Resetting all features (and
deleting all data in memory)
{#}{1}{5}{9}
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB3020 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
{0} “NO” (default)
{1} “YES”
L Disconnect the telephone line cord (KX-MB3020 only), USB cable and LAN
cable before activating this feature.
To reset all features:
1. {Menu} i {#}{1}{5}{9}
2. Press {1} to select “YES”. i {Set}
3. Press {1} to select “YES”. i {Set}
Note:
L The counter view (feature #484 on page 58) will not be reset.
Setting the ringer pattern
{#}{1}{6}{1}
(KX-MB3020 only)
{1} “A” (default)
{2} “B”
{3} “C”
Changing the ring count in
FAX ONLY mode
{#}{2}{1}{0}
(KX-MB3020 only)
{1} “1”
{2} “2”
{3} “3” (default)
{4} “4”
{5} “5 EXT. TAM” (External Telephone Answering Machine)
Setting the Caller ID list to
print automatically
{#}{2}{1}{6}
(KX-MB3020 only)
{0} “OFF” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
{1} “ON”: The unit will print the Caller ID list automatically after every 30 new
calls (page 51).
Setting the time adjustment
{#}{2}{2}{6}
(KX-MB3020 only)
Using this feature, the unit’s date and time setting will be automatically adjusted
when caller information is received.
{1} “AUTO” (default): The date and time setting will be automatically adjusted.
{2} “MANUAL”: Deactivates this feature.
56
9. Programmable Features
Feature/Code
Selection
Setting the recording paper
size in the standard input tray
{#}{3}{8}{0}
{1} “LETTER” (default): Letter-size paper
{2} “A4”: A4-size paper
{3} “LEGAL”: Legal-size paper
Setting the recording paper
size in the lower input tray
{#}{3}{8}{2}
This feature will be displayed only when the lower input tray is installed (page
74).
{1} “LETTER” (default): Letter-size paper
{2} “A4”: A4-size paper
{3} “LEGAL”: Legal-size paper
Setting the recording paper
type
{#}{3}{8}{3}
{1} “PLAIN PAPER” (default): 75 g/m2 to 90 g/m2 (20 lb to 24 lb) paper.
{2} “THIN PAPER”: 64 g/m2 to 75 g/m2 (17 lb to 20 lb) paper.
{3} “THICK PAPER”: 90 g/m2 to 165 g/m2 (24 lb to 44 lb) paper.
Note:
L This setting is valid for both the standard input tray and the lower input tray.
L “THICK PAPER” will not be displayed if any of the paper input tray settings
are changed to “#2” or “#1+#2”:
– fax (feature #440 on page 61) (KX-MB3020 only).
– copy (feature #460 on page 63).
– PCL® (feature #760 on page 64) (KX-MB3020 only).
– scan to email print feature (feature #565 on page 69).
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
To set the length of time before the unit enters power save mode.
{1} “5min”: 5 minutes
{2} “15min” (default): 15 minutes
{3} “30min”: 30 minutes
{4} “1h”: 1 hour
Note:
L When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
{#}{4}{6}{2}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying.
L The previous setting will be held individually for sending faxes (KX-MB3020
only).
Setting the default operation
mode
{#}{4}{6}{3}
(KX-MB3020 only)
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} “COPY” (default): Copy mode is selected as default.
{2} “FAX”: Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{4}{6}{4}
(KX-MB3020 only)
To set the timer before returning to the default operation mode (feature #463).
{0} “OFF”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
Setting toner save feature
{#}{4}{8}{2}
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
L This setting is valid for copying, and when the unit automatically prints
reports/lists.
L This setting is invalid for printing received faxes.
57
9. Programmable Features
Feature/Code
Selection
Viewing the counter
{#}{4}{8}{4}
To confirm the count number of prints.
1. {Menu} i {#}{4}{8}{4}
2. {Set} i {Menu}
58
9. Programmable Features
9.3 Fax features (KX-MB3020 only)
Feature/Code
Selection
Erasing all items stored for
the one-touch dial and
navigator directory
{#}{2}{8}{9}
{0} “NO” (default)
{1} “YES”
L Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all items:
1. {Menu} i {#}{2}{8}{9}
2. Press {1} to select “YES”. i {Set}
3. Press {1} to select “YES”. i {Set} i {Menu}
Printing a confirmation report
{#}{4}{0}{1}
{0} “OFF”: Confirmation reports will not be printed.
{1} “ON”: A confirmation report will be printed after every fax transmission.
{2} “ERROR” (default): A confirmation report will be printed only when fax
transmission fails.
Setting the journal report to
print automatically
{#}{4}{0}{2}
{0} “OFF”: The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
{1} “ON” (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 41).
Sending documents
overseas
{#}{4}{1}{1}
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{0} “OFF”: Deactivates this feature.
{1} “NEXT FAX”: This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{2} “ERROR” (default): When the previous fax transmission fails and you wish to
re-send the document.
Note:
L This feature is not available for broadcast transmission.
L Calling charges may be higher than usual.
59
9. Programmable Features
Feature/Code
Selection
Sending a fax at a specific
time
{#}{4}{1}{2}
This feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
{0} “OFF” (default)
{1} “ON”
To send a document:
1. If the {Fax} light is OFF, turn it ON by pressing {Fax}.
2. Set the original (page 17).
3. If necessary, change the resolution (page 41) and the contrast (page 41).
4. {Menu} i {#}{4}{1}{2}
5. Press {1} to select “ON”. i {Set}
6. Enter the fax number.
L To enter an item using one-touch dial feature and navigator directory,
see step 3 on “6.3.1 Using the scanner glass”, page 43. (When using
navigator directory, you do not have to press {Directory} before
pressing {V} or {^}.)
7. {Set}
8. Enter the transmission start time.
L Press {*} repeatedly to select “AM” or “PM”.
9. When using the scanner glass, press {Set}. i {Start}
When using the automatic document feeder, press {Set}.
L The document will be fed into the unit and scanned into memory. The
unit will then send the data at the specified time. You cannot use this
feature for another fax transmission until the former sending is
completed.
Note:
L To cancel this setting after programming, press {Stop} while the unit is idle,
and then press {Set}.
Setting the Error Correction
Mode (ECM)
{#}{4}{1}{3}
This feature is available when the sending / receiving fax machines are ECM
compatible.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): Fax transmission / reception will be carried out so that the
errors do not occur.
Setting the connecting tone
{#}{4}{1}{6}
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
L The connecting tone volume cannot be adjusted.
Setting the maximum fax
speed
{#}{4}{1}{8}
{1} “14.4Kbps”
{2} “33.6Kbps” (default)
Note:
L The fax speed maybe lower than the selected speed depending on your
line.
Activating the Distinctive
Ring feature
{#}{4}{3}{0}
{0} “OFF” (default)
{1} “ON”
See page 53 for details.
60
9. Programmable Features
Feature/Code
Selection
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{4}{3}{1}
{1} “A”
{2} “B”
{3} “C”
{4} “D”
{5} “B-D” (default)
See page 53 for details.
Setting auto reduction
feature
{#}{4}{3}{2}
To receive a fax document that is longer than your recording paper.
{0} “OFF”: The unit will print received documents at their original size.
{1} “ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{0} “OFF”
{1} “ON” (default)
1. {Menu} i {#}{4}{3}{4}
2. Press {1} to select “ON”. i {Set}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is “;#9”.
L Do not enter “0000”.
4. {Set} i {Menu}
Setting the memory reception
alert
{#}{4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{4}{3}{8}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{0} “OFF”: You have to press {Start}, and then {2} for fax reception.
{1} “ON” (default): You do not have to press {Start}, and then {2} for fax
reception.
Setting the paper input tray to
use for printing received
faxes
{#}{4}{4}{0}
This feature will be displayed only when the lower input tray is installed (page
74).
{1} “#1”: Standard input tray
{2} “#2”: Lower input tray
{3} “AUTO” (default): The unit will automatically select the standard input tray or
the lower input tray according to the paper size of the received faxes.
Note:
L To select “#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording
paper type setting (feature #383 on page 57).
61
9. Programmable Features
Feature/Code
Selection
Receiving a fax into the
computer
{#}{4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature
#448 on page 50).
{0} “OFF” (default): Deactivates this feature.
{1} “ALWAYS”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will store received documents in memory, and then transfer the
data after recognition of the connection.
{2} “CONNECTED”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will print the data.
Setting the computer for PC
fax reception
{#}{4}{4}{3}
To select the computer that will be used for receiving a fax. See page 22 for
details.
Sending legal size
documents using the scanner
glass
{#}{4}{4}{5}
{0} “OFF” (default): Deactivates this feature.
{1} “NEXT FAX”: Legal-size documents can be sent for the next fax
transmission using the scanner glass. After transmission, this setting will turn
OFF automatically.
{2} “ALWAYS”: Legal-size documents can be sent using the scanner glass
anytime.
Setting the fax preview mode
{#}{4}{4}{8}
See page 50 for details.
Setting the web fax preview
access code
{#}{4}{5}{0}
See page 50 for details.
Resetting fax features to their
default settings
{#}{4}{5}{9}
{0} “NO” (default)
{1} “YES”
To reset the fax features:
1. {Menu} i {#}{4}{5}{9}
2. Press {1} to select “YES”. i {Set} i {Set} i {Menu}
Note:
L The PC fax reception (feature #443 on page 22) will not be reset.
L If you select “YES”, the unit will print the received fax documents that have
been stored into memory.
62
9. Programmable Features
9.4 Copy features
Feature/Code
Selection
Setting the paper input tray to
use for copy
{#}{4}{6}{0}
This feature will be displayed only when the lower input tray is installed (page
74).
{1} “#1” (default): Standard input tray
{2} “#2”: Lower input tray
{3} “#1+#2”
Note:
L To select “#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording
paper type setting (feature #383 on page 57).
L To select “#1+#2”,
– select the same paper size for the standard input tray (feature #380 on
page 57) and lower input tray (feature #382 on page 57). If either is
changed, “#1” will be selected automatically.
– select “PLAIN PAPER” or “THIN PAPER” for the recording paper type
setting (feature #383 on page 57).
L If the copy input tray prompt (feature #471 on page 63) is activated, it
overrides this feature.
Changing the default copy
resolution
{#}{4}{6}{1}
To change the default resolution setting for copying.
{1} “TEXT/PHOTO” (default): For documents containing both text and
photographs.
{2} “TEXT”: For documents containing only text.
{3} “PHOTO”: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
{#}{4}{6}{7}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will hold the previous setting.
Holding the previous zoom
setting
{#}{4}{6}{8}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{4}{6}{9}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will hold the previous setting.
Holding the previous duplex
setting
{#}{4}{7}{0}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will hold the previous setting.
Setting the paper input tray
prompt for copy
{#}{4}{7}{1}
This feature will be displayed only when the lower input tray is installed (page
74).
{0} “OFF”: Deactivates this feature.
{1} “AUTO” (default): When making a copy, you will be prompted to select the
desired paper input tray if the recording paper size setting is different for the
standard input tray (feature #380 on page 57) and the lower input tray (feature
#382 on page 57).
{2} “ALWAYS”: When making a copy, you will always be prompted to select the
desired recording paper size.
Note:
L When prompted, select the desired recording paper size by pressing {V} or
{^} repeatedly, then press {Start}.
L Even if “AUTO” or “ALWAYS” is selected, this feature will not be activated if
the recording paper type setting (feature #383 on page 57) is set to “THICK
PAPER”. Change the setting to “PLAIN PAPER” or “THIN PAPER”
beforehand.
63
9. Programmable Features
9.5 PC print features
Feature/Code
Selection
Setting the paper input tray in
PCL
{#}{7}{6}{0}
(KX-MB3020 only)
This feature will be displayed only when the lower input tray is installed (page
74).
{1} “#1” (default): Standard input tray
{2} “#2”: Lower input tray
{3} “#1+#2”
Note:
L To select “#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording
paper type setting (feature #383 on page 57).
L To select “#1+#2”,
– select the same paper size for the standard input tray (feature #380 on
page 57) and lower input tray (feature #382 on page 57). If either is
changed, “#1” will be selected automatically.
– select “PLAIN PAPER” or “THIN PAPER” for the recording paper type
setting (feature #383 on page 57).
Setting the number of copies
in PCL
{#}{7}{6}{2}
(KX-MB3020 only)
1. {Menu} i {#}{7}{6}{2} i {Set}
Setting the recording paper
size in PCL
{#}{7}{6}{3}
(KX-MB3020 only)
{1} “LETTER” (default): Letter-size paper
{2} “A4”: A4-size paper
{3} “LEGAL”: Legal-size paper
Setting the image reduction
feature in PCL
{#}{7}{6}{4}
(KX-MB3020 only)
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): The document resolution will be automatically reduced
when the data size is too large to print.
Setting the recording paper
direction in PCL
{#}{7}{6}{5}
(KX-MB3020 only)
{1} “PORTRAIT” (default): The document will be printed in portrait direction.
{2} “LANDSCAPE”: The document will be printed in landscape direction.
Setting the A4 wide feature in
PCL
{#}{7}{6}{6}
(KX-MB3020 only)
You can change the margin and printable area of A4-size recording paper so
that 80 characters in 10 cpi font may be printed on a line.
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The margin and printable area of A4 recording paper will be changed.
Setting the line per page in
PCL
{#}{7}{6}{7}
(KX-MB3020 only)
To set the number of lines per page in PCL printing.
2. Enter the number of copies from “001” to “999”, using the dial keypad.
L The default setting is “001”.
3. {Set} i {Menu}
Note:
L This feature may lower the print quality by reducing the resolution.
1. {Menu} i {#}{7}{6}{7} i {Set}
2. Enter the number of lines per page from “005” to “128”, using the dial
keypad.
L The default setting is “060”.
3. {Set} i {Menu}
Setting the font source in PCL
{#}{7}{6}{8}
(KX-MB3020 only)
64
This feature is available when the downloaded font is registered to the unit.
{1} “RESIDENT” (default): The document will be printed using resident font.
{2} “DOWNLOAD FONT”: The document will be printed using download font.
9. Programmable Features
Feature/Code
Selection
Setting the font number in
PCL
{#}{7}{6}{9}
(KX-MB3020 only)
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
1. {Menu} i {#}{7}{6}{9} i {Set}
2. Enter the font number from “000” to “054”, using the dial keypad.
L The default setting is “000”.
3. {Set} i {Menu}
Note:
L If the font source in PCL (feature #768 on page 64) is set to “DOWNLOAD
FONT”, the default setting is “001”.
L To print the font list, see page 98.
Setting the font pitch/point in
PCL
{#}{7}{7}{0}
(KX-MB3020 only)
To set the font pitch/point to be used in PCL printing.
1. {Menu} i {#}{7}{7}{0} i {Set}
2. Enter the font pitch from “00.44” to “99.99”, or the point from “004.00”
to “999.75”, using the dial keypad.
L The default pitch is “10.00” and the default point is “012.00”.
3. {Set} i {Menu}
Setting the symbol set in PCL
{#}{7}{7}{1}
(KX-MB3020 only)
To set the symbol set to be used in PCL printing.
1. {Menu} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {Set}
i {Menu}
Setting the line breaks in PCL
{#}{7}{7}{2}
(KX-MB3020 only)
To set each behavior when receiving CR, LF, and FF codes.
{1} “CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
{2} “CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
{3} “CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{7}{7}{3}
(KX-MB3020 only)
To set the length of time before the unit recovers if a memory overflow occurs.
{1} “OFF” (default): Deactivates this feature.
{2} “20s”: 20 seconds
{3} “30s”: 30 seconds
{4} “60s”: 60 seconds
{5} “90s”: 90 seconds
{6} “120s”: 120 seconds
Changing the data timeout
setting
{#}{7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {Menu} i {#}{7}{7}{4} i {Set}
2. Enter the desired data timeout setting from “005” seconds to “600”
seconds, using the dial keypad.
L The default setting is “060” seconds.
3. {Set} i {Menu}
Setting mutual A4/letter print
{#}{7}{7}{6}
This feature allows printing in A4-size even if letter-size recording paper is
loaded, and vice versa.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): Printing is possible between A4/letter-size.
65
9. Programmable Features
9.6 Scan features
Feature/Code
Selection
Setting the scan mode for
Push Scan
{#}{4}{9}{3}
{1} “VIEWER” (default): The scanned image will be displayed in the [MultiFunction Viewer] window.
{2} “FILE”: The scanned image will be saved as a file.
{3} “EMAIL”: The scanned image will be saved for email attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
{5} “EMAIL ADDRESS”: The scanned image will be sent as an attachment
without using email software.
{6} “FTP SERVER”: The scanned image will be sent to the pre-programmed
folder on the FTP server.
Note:
L Following selections will be displayed only when the server setting is
programmed through the web browser interface in advance.
– “EMAIL ADDRESS” will be displayed when the email server setting is
programmed (page 66).
– “FTP SERVER” will be displayed when the FTP server setting is
programmed (page 67).
Holding the previous
scanning parameter for Push
Scan
{#}{4}{9}{4}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will hold the previous scan settings for each mode of
push scan.
Setting the information for
scan to email address (LAN
connection only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files as email attachments directly from this unit, you
need to program the email server and SMTP server settings beforehand.
Consult your service provider or network administrator for details.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 56). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [EMAIL SERVER].
6. Enter the email server and SMTP server information. i [Submit]
7. Close the web browser.
Registering the scan to email
address destinations (LAN
connection only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files as email attachments directly from this unit, you
can register email destinations (up to 300 destinations) for the unit through the
web browser interface in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 56). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [SEND USER].
6. Click [Edit] next to the desired scan to email user.
7. Enter the name and email address.
L Select the station key number from the drop-down list if necessary (KXMB3020 only).
8. [Submit]
9. Close the web browser.
66
9. Programmable Features
Feature/Code
Selection
Setting the information for
scan to FTP (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files to an FTP server, you can register FTP
destinations (up to 6 destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 56). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [FTP SERVER].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, folder directory, etc. i [Submit]
8. Close the web browser.
Note:
L If you do not enter a folder directory in step 7, the scanned image will be
saved in the root folder.
67
9. Programmable Features
9.7 LAN features
Feature/Code
Selection
LAN setting with a DHCP
server
{#}{5}{0}{0}
{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the
LAN connection
{#}{5}{0}{1}
This feature is available when feature #500 is deactivated.
Setting the Subnet mask for
the LAN connection
{#}{5}{0}{2}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{1} i {Set}
2. Enter the IP address of the unit on the LAN using the dial keypad. i {Set}
i {Menu}
1. {Menu} i {#}{5}{0}{2} i {Set}
2. Enter the subnet mask of the network on the LAN using the dial keypad. i
{Set} i {Menu}
Setting the default gateway
for the LAN connection
{#}{5}{0}{3}
This feature is available when feature #500 is deactivated.
Setting the primary DNS
server for the LAN
connection
{#}{5}{0}{4}
This feature is available when feature #500 is deactivated.
Setting the secondary DNS
server for the LAN
connection
{#}{5}{0}{5}
This feature is available when feature #500 is deactivated.
Setting the machine name
{#}{5}{0}{7}
1. {Menu} i {#}{5}{0}{7} i {Set}
1. {Menu} i {#}{5}{0}{3} i {Set}
2. Enter the default gateway of the network on the LAN using the dial keypad.
i {Set} i {Menu}
1. {Menu} i {#}{5}{0}{4} i {Set}
2. Enter the primary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
1. {Menu} i {#}{5}{0}{5} i {Set}
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
2. Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 72 for character entry).
L The following symbols can also be entered.
!@#$%^&')(.-_{}
3. {Set} i {Menu}
Note:
L In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
Displaying the MAC address
of the unit
{#}{5}{0}{8}
68
1. {Menu} i {#}{5}{0}{8} i {Set}
2. The MAC address of the unit will be displayed. i {Menu}
9. Programmable Features
Feature/Code
Selection
Approving users for the LAN
connection
{#}{5}{3}{2}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will deny/approve access from the pre-programmed
IP patterns. You can program whether to deny or approve IP addresses. Up to
4 patterns each for IPv4 and IPv6 can be programmed through the web browser
interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Network Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 56). i [OK]
4. Select the [LAN FEATURE] tab.
5. Click [Edit] next to [APPROVED USERS].
6. Click [Edit] next to [FILTER(IPv4)]/[FILTER(IPv6)].
7. Change the mode and edit IP filtering information. i [Submit]
8. Close the web browser.
Setting the IP address
automatically for the LAN
connection
{#}{5}{3}{3}
This feature will be displayed only when feature #500 is activated.
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: IP address will be allocated automatically without using a
DHCP (Dynamic Host Configuration Protocol) server.
Setting HTTPD for the LAN
connection
{#}{5}{3}{4}
{0} “DISABLED”: Denies access to the web browser.
{1} “ENABLED” (default): Allows access to the web browser.
IPv6 protocol
{#}{5}{3}{5}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: IPv6 protocol can be used. After installing the printer driver, be
sure to change the port to IPv6 protocol. You can check the IPv6 protocol
address by printing the “SETUP LIST” (page 98).
Note:
L To activate this feature, you need to turn the power switch of the unit OFF,
then ON.
Setting the paper input tray to
use for the scan to email print
feature
{#}{5}{6}{5}
This feature will be displayed only when the lower input tray is installed (page
74).
{1} “#1” (default): Standard input tray
{2} “#2”: Lower input tray
{3} “#1+#2”
Note:
L To select “#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording
paper type setting (feature #383 on page 57).
L To select “#1+#2”,
– select the same paper size for the standard input tray (feature #380 on
page 57) and lower input tray (feature #382 on page 57). If either is
changed, “#1” will be selected automatically.
– select “PLAIN PAPER” or “THIN PAPER” for the recording paper type
setting (feature #383 on page 57).
Erasing all email addresses
stored in the unit
{#}{5}{7}{8}
{0} “NO” (default)
{1} “YES”
L Disconnect the telephone line cord (KX-MB3020 only), USB cable and LAN
cable before activating this feature.
To erase all email addresses:
1. {Menu} i {#}{5}{7}{8}
2. Press {1} to select “YES”. i {Set}
3. Press {1} to select “YES”. i {Set} i {Menu}
69
9. Programmable Features
9.8 Network features (LAN connection only)
These features can be programmed through the web browser interface.
Feature
Tab
Selection
Setting the LAN
features
[LAN FEATURE]
Enter the LAN feature settings. See page 68 for details.
Setting the community
name for SNMP
[SNMP]
Enter the SNMP community name. Consult your
service provider or network administrator for details.
Setting the location
where you use this unit
[SNMP]
Enter the location information of the unit.
Displaying the link local
address for IPv6
[IPv6]
The link local address will be displayed.
Displaying the IPv6
address for auto
configuration
[IPv6]
The IP address for auto configuration will be displayed.
Setting the IP address
for IPv6
[IPv6]
Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Setting the default
router for IPv6
[IPv6]
Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Setting the information
for scan to FTP
[FTP FEATURE]
Enter the FTP server information to send scanned
images from the unit to an FTP server. See page 67 for
details.
Setting the information
for scan to email
address
[EMAIL FEATURE]
Enter the email server and SMTP server information to
send scanned images from the unit via an email. See
page 66 for details.
Registering the scan to
email address
destinations
[EMAIL FEATURE]
Register email address destinations (up to 300
destinations) for the unit. See page 66 for details.
Setting the error notify
feature
[ERROR NOTIFY]
[ENABLED]: The unit will send an email to registered
destinations when a problem occurs.
[DISABLED] (default): Deactivates this feature.
Setting the email server
information for the error
notify feature
[ERROR NOTIFY]
Enter the email server and SMTP server information to
send error notification emails to.
Registering
destinations for the
error notify feature
[ERROR NOTIFY]
Enter the email address to which error notifications will
be sent and select the types of problems.
[LIFE WARNING]: A warning indicating that the toner
cartridge or drum cartridge needs to be replaced soon.
[MEDIA PATH ERROR]: An error indicating that there
is a problem with the paper input tray.
[LIFE ERROR]: An error indicating that the toner
cartridge or drum cartridge needs to be replaced.
Setting the scan to
email print feature
[SCAN TO EMAIL
PRINT]
[ENABLED]: The unit will automatically print email
attachment that it receives.
[DISABLED] (default): Deactivates this feature.
See page 28 for details.
Setting the email
checking interval
[SCAN TO EMAIL
PRINT]
Enter the desired email checking interval for the scan to
email print feature.
70
9. Programmable Features
Feature
Tab
Selection
Setting the header print
option
[SCAN TO EMAIL
PRINT]
[ENABLED] (default): The unit will print the header
information along with the received email attachments.
[DISABLED]: Deactivates this feature.
Setting the email server
information for the scan
to email print feature
[SCAN TO EMAIL
PRINT]
When you use the scan to email print feature, you need
to program the POP server settings beforehand. See
page 28 for details.
Displaying the scan to
email print list
[SCAN TO EMAIL
PRINT]
The information for the 30 most recently received
emails will be displayed.
71
10. Useful Information
10 Useful
Useful
Information
Information
10.1 Character entry
10.2 Status of the unit
The dial keypad is used to enter characters and
numbers.
– Press {<} or {>} to move the cursor.
– Press dial keys to enter characters and numbers.
– Press {Stop} to erase the character or number
highlighted by the cursor. Press and hold {Stop} to
erase all characters or numbers.
– To enter another character located on the same dial
key, press {>} to move the cursor to the next space,
then press the appropriate dial key.
Keypad
Characters
{1}
1
.
_
–
[
]
{
}
/
=
,
`
:
;
?
|
{2}
A B C a
b
c
2
{3}
D E F d
e
f
3
{4}
G H I
g
h
i
4
{5}
J
j
k
l
5
{6}
M N O m n
o
6
{7}
P Q R S p
q
r
{8}
T U V t
u
v
8
{9}
W X Y Z w
x
{0}
0
@ (
)
$
% & ¥
K L
+
KX-MB3020 only:
– Storing, editing or erasing items in directories (page
42)
– Storing or erasing items for broadcast transmission
(page 44)
– Viewing items in the journal report (page 41)
– Saving the journal report to your computer
– Viewing items in the Caller ID list (page 51)
– Storing caller information into directories (page 52)
– Saving the Caller ID list on your computer
L The [Multi-Function Remote Control] window
will appear.
7
y
z
9
<
> !
"
#
@
^
→
{#}
To switch between uppercase
and lowercase letters.
{Flash}
(KX-MB3020 only)
Hyphen
{Zoom}
To insert a space.
{Stop}
To delete a character.
* The pictured model is KX-MB3020.
To select characters using {V} or {^}
Instead of pressing the dial keys, you can select
characters using {V} or {^}.
1. Press {V} repeatedly to display the desired
character. Characters will be displayed in the
following order:
1 Uppercase letters
2 Numbers
3 Symbols
4 Lowercase letters
L If you press {^}, the order will be reversed.
2. Press {>} to insert the displayed character.
3. Return to step 1 to enter the next character.
72
You can easily operate the following functions from your
computer.
– Programming the features (page 55)
1 Start Multi-Function Station. i [Remote Control]
s
’
10.2.1 Using Remote Control
2 Select the desired tab (KX-MB3020 only).
L The latest data in the unit will be displayed.
3 Perform the desired operation.
L For details about each function, click [Help].
L To stop the operation, click [Cancel].
4 [OK]
L You can also click [Apply] to continue the next
operation without closing the window.
5 Enter the password (feature #155 on page 56). i
[OK]
L The new data will be transferred to the unit and
the window will close.
Note:
L Some of the features cannot be programmed from
your computer.
L For details, see the help file by selecting [p] from
Multi-Function Station.
10. Useful Information
L When another person is adjusting stored data in the
unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.
10.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
1 Start Multi-Function Station.
2 [Utilities] i [Device Monitor]
L The [Device Monitor] window will appear.
3 Confirm the status of the unit.
[Status]: Current status of the unit
Note:
L Additional information (toner and recording paper
status, unit information, etc.) will be displayed in
[Status] tab by clicking [Advanced Information].
L You can update the status of the unit by clicking
[Refresh].
L If a printing error occurs, the Device Monitor will start
automatically and display the error information.
L For details, see the help file by selecting [p] from
Multi-Function Station.
10.2.3 Using the web browser (LAN
connection only)
You can confirm the setting information and status of the
unit from the web browser.
1 Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address in a web browser.
10.3 Canceling the operations
You can cancel the current operation from the unit. You
can also select the desired operation to cancel.
1 {Stop}
L “USER STOPPED” is displayed.
L If “USER STOPPED” is not displayed, go to step
2.
2 To cancel printing:
Press {Stop} repeatedly to display “STOP
PRINTING?”.
To cancel scanning (KX-MB3020 only):
Press {Stop} repeatedly to display “STOP
SCANNING?”.
To cancel copying:
Press {Stop} repeatedly to display “STOP
COPYING?”.
To cancel sending or receiving faxes (KXMB3020 only):
Press {Stop} repeatedly to display “STOP FAX?”.
To cancel broadcast transmission (KX-MB3020
only):
Press {Stop} repeatedly to display “BROAD
CANCELED?”.
To cancel fax redialing (KX-MB3020 only):
Press {Stop} repeatedly to display “SEND
CANCELED?”.
3 {Set}
2 Select a category from the menu bar.
[Status]: Toner and paper information, etc.
[Device]: Current status of the unit, etc.
[Network]: Network information, etc.
L When you select [Device] or [Network], you
can change which features are displayed by
clicking the feature tabs at the top of the right
frame.
3 Confirm the status of the unit.
Note:
L You can update the status of the unit by clicking
[Reload].
73
10. Useful Information
Option
10.4 Lower input tray (optional)
Caution for the lower input tray
L Do not drop the lower input tray.
You can add the lower input tray. See page 7 for
accessory information.
The lower input tray can hold:
– Up to 520 sheets of 75 g/m2 (20 lb) paper.
– Up to 470 sheets of 80 g/m2 (21 lb) paper.
– Up to 410 sheets of 90 g/m2 (24 lb) paper.
L The unit is set for printing letter-size plain paper
by default.
– To use A4 or legal-size paper, change the
recording paper size setting (feature #382 on
page 57).
– To use thin paper, change the recording paper
type setting (feature #383 on page 57).
Important:
L Before starting installation of the lower input
tray, be sure to turn the power switch OFF. For
more details about the installation, please refer
to the installation guide for the lower input tray.
L After installation, you can select the lower input
tray to be used for the following:
– Paper input tray setting for faxing (feature
#440 on page 61) (KX-MB3020 only).
– Paper input tray setting for copying (feature
#460 on page 63).
– Paper input tray in PCL (feature #760 on page
64) (KX-MB3020 only).
– Paper input tray setting for the scan to email
print feature (feature #565 on page 69).
L To use the lower input tray with your computer,
you need to change the printer properties. See
page 75 for details.
74
L Hold the lower input tray with both hands when
removing or installing. The lower input tray
weighs approximately 4.8 kg (10.6 lb) when fully
loaded with recording paper.
Do not touch the plate (1) on the left side of the
lower input tray.
1
Approx. 4.8 kg (10.6 lb)
L Do not position the unit in a location where it is
unstable or subject to vibrations. The unit weighs
approximately 35 kg (77 lb) when the lower input tray
is installed and fully loaded with recording paper.
10. Useful Information
10.5 Setting the lower input tray
To use the lower input tray with your computer, proceed
as follows.
1 [Start]
2 Open the printer window.
For Windows 98/Windows Me/Windows 2000:
[Settings] i [Printers]
For Windows XP Professional:
[Printers and Faxes]
For Windows XP Home:
[Control Panel] i [Printers and Other
Hardware] i [Printers and Faxes]
For Windows Vista:
[Control Panel] i [Printers]
3 Select the unit’s name.
4 For Windows 98/Windows Me/Windows
2000/Windows XP:
Select [Properties] from the [File] menu.
L The printer properties window will appear.
For Windows Vista:
Select [Properties] from the [Organize] menu.
L The printer properties window will appear.
5 Click [Auto Configuration] on the [Device] tab.
i [OK]
L The lower input tray will be automatically
detected.
– For [Number of Input Tray], [2] will be
selected.
If the setting is not changed automatically, change it
manually.
6 [OK]
75
11. Help
11 Help
Error
Messages
11.1 Error messages – Reports (KX-MB3020 only)
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the
confirmation and journal reports (page 41).
Message
Code
COMMUNICATION ERROR
40-42
46-72
FF
Cause & Solution
L A transmission or reception error occurred. Try
again or check with the other party.
43
44
L A line problem occurred. Connect the telephone line
cord to a different jack and try again.
L An overseas transmission error occurred. Try using
the overseas mode (feature #411 on page 59).
DOCUMENT JAMMED
-----
L Remove the jammed document (page 95).
ERROR-NOT YOUR UNIT
53
54
59
70
L A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.
JUNK FAX PROH. REJECT
-----
L The junk fax prohibitor feature of this unit rejected
fax reception.
MEMORY FULL
-----
L The memory is full of received documents due to a
lack of recording paper or a recording paper jam.
Load paper (page 13) or remove the jammed paper
(page 89).
L If the PC fax setting (feature #442 on page 62) is set
to “ALWAYS”, check the connection between the
computer and the unit.
L If the fax preview mode (feature #448 on page 50) is
set to “ON”, view, print or save the documents on the
web browser, and then erase unnecessary
documents (page 50).
NO DOCUMENT / FAILED PICKUP
-----
L The document was not fed into the unit properly. Reinsert it and try again.
OTHER FAX NOT RESPONDING
-----
L The other party’s fax machine is busy or has run out
of recording paper. Try again.
L The other party’s fax machine rings too many times.
Send the fax manually (page 41).
L The other party’s machine is not a fax machine.
Check with the other party.
L The number you dialed is not in service.
PRESSED THE ‘Stop’ KEY
-----
L {Stop} was pressed and fax communication was
canceled.
THE COVER WAS OPENED
-----
L The left cover was opened. Close it and try again.
OK
-----
L Fax transmission or reception was successful.
76
For assistance, please visit http://www.panasonic.com/help
11. Help
11.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause & Solution
“CALL SERVICE”
L There is something wrong with the unit. Contact our service personnel.
“CHANGE DRUM”
L There is something wrong with the drum cartridge. Replace the drum
cartridge and the toner cartridge.
“CHECK DOCUMENT”
L The document was not fed into the unit properly. Remove the document,
and then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 97)
and try again.
“CHECK DRUM”
L The drum cartridge is not inserted properly. Re-insert it correctly (page 10).
“CHECK INSTALL INPUT
TRAY #1”
L The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
Note:
L “#1”: Standard input tray
L “#2”: Lower input tray
L “#1+#2”: Standard input tray and lower input tray
“CHECK PAPER”
L The recording paper size setting and/or the loaded recording paper is not
appropriate.
– The recording paper size is not the same as the size selected for copy.
– The recording paper size is not the same as the size selected when
printing from the PC.
– The recording paper size is not the same as the size selected for
receiving a fax (KX-MB3020 only).
Change the recording paper size setting (feature #380 on page 57 or
feature #382 on page 57), and load the appropriate recording paper.
“CHECK PICK UP INPUT
TRAY #1”
L Recording paper was not fed into the unit properly. Load the paper again
(page 94).
Note:
L “#1”: Standard input tray
L “#2”: Lower input tray
“DIRECTORY FULL”
L There is no space to store new items in navigator directory. Erase
unnecessary items (page 43).
“DRUM LIFE LOW REPLACE
SOON”
L The drum life is near to an end. Replace the drum cartridge as soon as
possible.
“EMAIL SIZE OVER”
L When performing scan to email address, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“FAX IN MEMORY”
L The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
99.
L If the PC fax setting (feature #442 on page 62) is set to “ALWAYS”,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
L If the fax preview mode (feature #448 on page 50) is set to “ON”,
– view, print or save the received fax documents, and then erase the
unnecessary documents (page 50).
– turn the setting to “OFF”. The fax documents stored in memory will be
printed automatically.
For assistance, please visit http://www.panasonic.com/help
77
11. Help
Display
Cause & Solution
“FILE SIZE OVER”
L When performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“KEEP COPYING”
L Copying has stopped due to some existing problem (Example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“LEFT COVER OPEN”
L The left cover is open. Close it.
“LOW TEMP.”
L The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
“MEMORY FULL”
L When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L When making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
“MODEM ERROR”
L There is something wrong with the unit’s modem. Contact our service
personnel.
“NO FAX REPLY”
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“OUT OF PAPER INPUT TRAY
#1”
L Recording paper is not loaded or the paper input tray has run out of paper.
Load paper (page 13).
L Recording paper was not fed into the unit properly. Load the paper again
(page 13).
Note:
L “#1”: Standard input tray
L “#2”: Lower input tray
L “#1+#2”: Standard input tray and lower input tray
“PAPER JAMMED”
L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 89).
“PC FAIL OR BUSY”
L The cable or the computer power cord is not connected correctly. Check the
connections (page 15, 24).
L The software is not running on the computer. Restart the software and try
again.
“PLEASE WAIT”
L The unit is warming up. Wait for a while.
“REDIAL TIME OUT”
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“REMOVE DOCUMENT”
L The document is jammed. Remove the jammed document (page 95).
L Attempted to send or copy a document longer than 600 mm (235/8") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
“REPLACE DRUM CHANGE
SUPPLIES”
L The drum cartridge’s service life is finished. Replace the drum cartridge
immediately.
78
For assistance, please visit http://www.panasonic.com/help
11. Help
Display
Cause & Solution
“RX MEMORY FULL”
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 13) or remove the jammed
paper (page 89).
L If the PC fax setting (feature #442 on page 62) is set to “ALWAYS”,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
L If the fax preview mode (feature #448 on page 50) is set to “ON”,
– view, print or save the received fax documents, and then erase the
unnecessary documents (page 50).
– turn the setting to “OFF”. The fax documents stored in memory will be
printed automatically.
“SCANNER POSITION ERROR”
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“TONER EMPTY”
“CHANGE SUPPLIES”
L The toner’s service life is finished. Replace the toner cartridge immediately.
“TONER LOW”
“CHANGE SUPPLIES”
L The toner’s service life is near to an end. Replace the toner cartridge as
soon as possible.
“TRANSMIT ERROR”
L A transmission error occurred. Try again.
“TRAY #2 LEFT COVER
OPEN”
L The left cover of the lower input tray is open (page 74). Close it.
“WARMING UP”
L The inside of the unit is cold. Let the unit warm up. Wait for a while.
For assistance, please visit http://www.panasonic.com/help
79
11. Help
Troubleshooting
11.3 When a function does not work
11.3.1 General
Problem
Cause & Solution
The unit does not work.
L Check the connections (page 15, 24).
The recording paper exit
becomes full quickly or the
recording paper does not
stack properly at the
recording paper exit.
L High humidity may cause the recording paper to curl. Try turning the paper
over and re-inserting it. If the curl on the paper is heavy, please remove it
from the recording paper exit. If you still have this problem, contact our
service personnel.
I cannot adjust the volume,
display items stored in onetouch dial and navigator
directory or display Caller ID
information (KX-MB3020
only).
L The unit is set to scan mode or copy mode. Press {Fax} to switch modes.
If you still have this problem, contact our service personnel.
A printing error is displayed
while using PC FAX and
Remote Control (KX-MB3020
only).
L The printer driver is used for PC FAX and Remote Control. Transmission
errors will be displayed as printing errors.
Multi-Function Station does
not work properly.
L If the USB cable is connected to a USB hub, connect the cable directly to the
USB port on your computer.
L Make sure you have installed the latest Service Pack available for the
version of Windows installed on your computer. See the Microsoft web site
for details.
L If you have any other multifunction software installed on your computer,
uninstall it.
L Check that your computer has enough memory and hard disk space. If your
computer warns that there is insufficient memory, close other applications.
If there is not enough space on the hard disk, delete unnecessary files.
L Uninstall Multi-Function Station once, and re-install it.
I cannot install or uninstall
Multi-Function Station.
L Some of the files needed to install or uninstall Multi-Function Station may be
corrupted. Use the MfsCleaner utility (found on the supplied CD-ROM) to
solve the problem.
1. Insert the supplied CD-ROM into your CD-ROM drive.
L The setup program will start automatically.
2. [Tools] i [Cleanup Tool]
L The [MfsCleaner] window will appear.
3. Click [Clean], and then click [Yes] to restart the computer.
Note:
L To install Multi-Function Station again, see page 23.
I cannot view the operating
instructions using MultiFunction Station.
80
L Install the operating instructions on your computer beforehand (page 24).
For assistance, please visit http://www.panasonic.com/help
11. Help
Problem
Cause & Solution
I cannot find the unit in the
[Target Device] or [Device
Select] dialog box when
operating the following
functions.
– Scanning
– Remote Control
– PC FAX (KX-MB3020 only)
– Device Monitor
L The printer driver has not been installed. Install it on your computer (page
23).
I forgot the password for
feature programming via
remote operation.
L You may have changed the feature programming password. If you do not
remember it, assign a new password using feature #155 (page 56). When
required to enter the current password, enter “0101” instead.
11.3.2 Printing problems
Problem
Cause & Solution
The printing quality is poor
(e.g. has smudges, blurred
points or lines).
ABC
L Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
L You may have used paper with a cotton and/or fiber content that is over
20 %, such as letterhead or resume paper.
L The recording paper is too damp. Use new paper.
I changed the recording
paper, but the printing quality
is still poor.
L The glass or rollers are dirty with correction fluid, etc. Clean them (page 96,
97). Please do not insert a document before correction fluid has dried
completely.
L The toner save mode of feature #482 is ON (page 57).
L The remaining toner is low. Replace the toner cartridge.
L To check the drum life and quality, please print the printer test list (page 98).
If printing quality is still poor, replace the toner cartridge and drum cartridge.
A blank sheet is ejected.
L You placed the document facing the wrong way when using the copier.
L The other party placed the document in their fax machine the wrong way.
Check with the other party (KX-MB3020 only).
Colored text is printed in
black instead of grayscale
when printing from Microsoft
PowerPoint or other
applications.
L Select [Color] or remove the check next to [Grayscale] in the print dialog
so that colored text will be printed in grayscale.
When using the unit as a
printer, the printing result is
distorted.
L Your unit is connected to the computer by USB. After canceling printing
using your computer, you must wait for 60 seconds before re-printing to
avoid distorted printing.
For assistance, please visit http://www.panasonic.com/help
81
11. Help
Problem
Cause & Solution
I cannot find the PCL driver
(KX-MB3020 only).
L The PCL driver can be found in the following folder on the supplied CDROM.
Operating system
Folder path
Windows 98/
Windows Me
“D:\Drivers\Object\Printer\Win98Me\PCL”
Windows 2000/
Windows XP/
Windows Vista
“D:\Drivers\Object\Printer\WinVistaXp2k\PCL”
Windows XP
Professional x64
Edition/
Windows Vista x64
“D:\Drivers\Object\Printer\WinVistaXp_x64\PCL”
(where “D” is the drive letter of your CD-ROM drive)
For more details, refer to:
http://panasonic.net/pcc/support/fax/mfp-faq.htm
11.3.3 Scanner
Problem
Cause & Solution
I cannot scan.
L When scanning at a high resolution, a large amount of available memory is
required. If your computer warns that there is insufficient memory, close
other applications and try again.
L The unit is in use. Try again later.
L There is not enough space on the hard disk. Delete unnecessary files and
try again.
L Check the connection between the computer and the unit (page 15, 24).
L Restart the computer, and try again.
L You attempted to scan a document longer than the paper size which you
set. Change the setting or divide the document into the appropriate paper
size, and try again.
The document is not fed into
the unit when using the unit
as a scanner.
L Remove the document in the automatic document feeder and re-insert it.
Even after clicking [Cancel],
scanning continues.
L Please wait. It may take a while for the cancel request to be accepted.
The name of the desired
computer is not displayed on
the unit when scanning
documents from the unit
(LAN connection only).
L The printer driver has not been installed. Install it on your computer (page
23).
L The PC name list up feature has been set to [Off]. Set [PC name list up
on device] to [On] (page 25).
L The maximum number of computers on the LAN is connected to the unit (up
to 30 computers). Set [PC name list up on device] to [Off] on the other
computers (page 25).
L The IP address of the unit may have changed. To detect the IP address,
proceed as follows.
[Start] i [All Programs] or [Programs] i [Panasonic] i the
unit’s name i [IP Address Checker]
L The IP address for the unit will be detected.
82
For assistance, please visit http://www.panasonic.com/help
11. Help
11.3.4 Copier
Problem
Cause & Solution
The unit will not make a copy.
L You cannot make a copy during programming. Make the copy after
programming.
L The document was not fed into the unit properly. Re-insert the document.
L Recording paper is not loaded or the unit has run out of paper. Load paper
(page 13).
Letters on the copied
documents are not clear.
L The original document is too dark or too light. Change the contrast (page
34) and try again.
The copied documents are
too dark and cannot be read.
L You used a colored paper as a document. Change the contrast (page 34)
and make a lighter copy of the document, using “TEXT” resolution (page
34).
11.3.5 Fax (KX-MB3020 only)
Problem
Cause & Solution
I cannot send documents.
L The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 15).
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
L The other party’s machine is not a fax machine. Check with the other party.
L The other party’s fax machine failed to answer the fax automatically. Send
the fax manually (page 41).
L Set the maximum fax speed to “14.4Kbps” (feature #418 on page 60).
I cannot send a fax overseas.
L Use the overseas transmission mode (feature #411 on page 59).
L Add two pauses at the end of the telephone number or dial manually.
The other party complains
that letters on their received
document are distorted.
L If your line has special telephone services such as call waiting, the service
may have been activated during fax transmission. Connect the unit to a line
that does not have these services.
L Another telephone on the same line is off the hook. Hang up the extension
telephone and try again.
The other party complains
about the quality of their
received documents.
L Try copying the document. If the copied image is clear, there may be
something wrong with the other party’s machine.
If the copied image is not clear, too dark, or black and white lines or
smudges appear, refer to “11.3.2 Printing problems”, page 81.
L The original document is too dark or too light. Change the contrast (page
41) and try again.
The other party complains
that received documents are
too dark and cannot be read.
L You used a colored paper as a document. Change the contrast (page 34)
and make a lighter copy of the document, using “TEXT” resolution (page
34), and try again.
For assistance, please visit http://www.panasonic.com/help
83
11. Help
Problem
Cause & Solution
I cannot receive documents.
L You may have subscribed to a voice mail service due to service packs
offered by your telephone company. Fax reception may not be possible
when voice mail is activated so we recommend you to:
– contact your telephone company and request to deactivate voice mail
service, or
– subscribe to a Distinctive Ring service (page 53).
L The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 15).
L The PC fax setting (feature #442 on page 62) is activated and the received
fax documents are automatically transferred to the computer. View the
received documents using the computer (page 49).
L The fax preview mode (feature #448 on page 50) is activated and the
received fax documents are automatically stored in memory. View the
received documents on the web browser (page 50).
L Set the maximum fax speed to “14.4Kbps” (feature #418 on page 60).
I cannot receive documents
automatically.
L The receiving mode is set to TEL mode. Set to FAX ONLY mode. Press
{Fax Auto Answer} repeatedly to turn ON the {Fax Auto Answer} light.
L The time taken to answer the call is too long. Decrease the number of rings
before the unit answers a call (feature #210 on page 56).
L Make sure that the Distinctive Ring of feature #430 is set properly (page 53).
If you do not subscribe to the Distinctive Ring service offered by your local
telephone company, this feature should be OFF.
The display shows
“CONNECTING.....”, but
faxes are not received.
L The incoming call is not a fax. Set to TEL mode. Press {Fax Auto Answer}
repeatedly to turn OFF the {Fax Auto Answer} light.
The printing quality of the
received documents is poor.
L If documents can be copied properly, the unit is working normally. The other
party may have sent a faint document or there may be something wrong
with the other party’s machine. Ask them to send a clearer copy of the
document or to check their fax machine.
L If documents can not be copied properly, refer to “11.3.2 Printing problems”,
page 81.
The other party complains
that they cannot send a
document.
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 13) or remove the jammed
paper (page 89).
L If the PC fax setting (feature #442 on page 62) is set to “ALWAYS”, check
the connection between the computer and the unit.
L If the fax preview mode (feature #448 on page 50) is set to “ON”, view, print
or save the documents, and then erase unnecessary documents (page 50).
L The unit is not in FAX ONLY mode. Press {Fax Auto Answer} repeatedly to
turn ON the {Fax Auto Answer} light.
I cannot select the desired
receiving mode.
L If you want to set FAX ONLY mode:
– press {Fax Auto Answer} repeatedly to turn ON the {Fax Auto
Answer} light.
L If you want to set TEL mode:
– press {Fax Auto Answer} repeatedly to turn OFF the {Fax Auto
Answer} light.
L The Distinctive Ring of feature #430 is activated (page 53).
When an extension telephone
is connected, I cannot receive
documents by pressing
{*}{#}{9}.
L You must set remote fax activation to ON (feature #434 on page 61)
beforehand.
L Press {*}{#}{9} firmly.
L You may have changed the remote fax activation code from {*}{#}{9}
(default setting). Verify the remote fax activation code (feature #434 on page
61).
84
For assistance, please visit http://www.panasonic.com/help
11. Help
Problem
Cause & Solution
I cannot hear a dial tone.
L The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 15).
L If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall jack directly. If the unit operates properly,
check the splitter/coupler.
L Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
L The power cord or telephone line cord is not connected. Check the
connections (page 15).
L If you connected the unit through a computer modem, connect the unit
directly to a telephone line jack.
I cannot make calls.
L The dialing mode setting may be wrong. Change the setting (feature #120
on page 16).
The unit does not ring.
L The ringer volume is turned OFF. Adjust it (page 19).
The other party complains
they only hear a fax tone and
cannot talk.
L FAX ONLY mode is set (page 46). Tell the other party the number is only
used for faxes.
L If you use a Distinctive Ring service, make sure you have set the same ring
pattern assigned by the telephone company (page 53).
The {Redial} or {Pause}
button does not function
properly.
L If this button is pressed during dialing, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialed will be
redialed.
The receiving mode does not
function properly.
L Distinctive Ring is set (feature #430 on page 53).
Whenever I try to retrieve my
voice mail messages, I am
interrupted by the fax tone.
L You are probably entering {*} {#} {9}. This is the default setting for the fax
activation code. If you use a voice mail service, turn the fax activation
feature OFF or reprogram the activation code (feature #434 on page 61).
I cannot receive a fax
document on the computer.
L Make sure the following features are set beforehand.
– PC fax reception (feature #442 on page 62)
– Computer setting for the PC fax reception (feature #443 on page 22)
I cannot display a received
fax document on the web
browser.
L Make sure the following features are set beforehand.
– Fax preview mode (feature #448 on page 50)
– Web fax preview access code (feature #450 on page 50)
L You cannot display a received fax document on the web browser during
printing, copying or scanning. Try again after printing, copying or scanning.
I cannot erase a received fax
document on the web
browser.
L View, print or save a received fax document before erasing (page 50).
For assistance, please visit http://www.panasonic.com/help
85
11. Help
11.3.6 Network
Problem
Cause & Solution
I cannot operate the following
functions.
– PC printing
– Scanning
– Remote Control
– PC FAX (KX-MB3020 only)
– Device Monitor
L Confirm the LED via the LAN port of the main board. If the LED is glowing
or blinking, network access is working correctly.
If the LED is not glowing or blinking, confirm the LAN cable (category 5
straight cable) is connected to the LAN port of the main board correctly.
L If the LED is blinking and you cannot perform the desired operation, the IP
address of the unit may have changed.
To detect the IP address, proceed as follows.
[Start] i [All Programs] or [Programs] i [Panasonic] i the
unit’s name i [IP Address Checker]
L The IP address for the unit will be detected.
Note:
L If the IP address cannot be detected, enter it manually (feature #501 on
page 68). The IP address of the computer and the unit must be in the
same local IP address class as shown below. Set the IP address in the
range of the number specified in the class corresponding to your local
network scale.
Class
Subnet mask
IP address
Class A
255.0.0.0
10.0.0.1 10.255.255.254
Class B
255.255.0.0
172.xx.0.1 172.xx.255.254*1
Class C
255.255.255.0
192.168.xx.1 192.168.xx.254*2
*1 “xx” should be the same value for the unit and for the computer, as
shown in the following example.
Example: 172.16.0.1 - 172.16.255.254
(The available range of “xx” is 16 - 31)
*2 “xx” should be the same value for the unit and for the computer, as
shown in the following example.
Example: 192.168.0.1 - 192.168.0.254
(The available range of “xx” is 0 - 255)
L Your firewall software is blocking the connection. Disable the firewall
software or change the firewall settings to make the Multi-Function Station
work properly.
L LAN features can be used when the unit and the computer are connected in
same network segment only. Make sure the network is configured correctly.
Consult your network administrator.
The unit does not appear in
the [Select a Network Device]
dialog box when installing
Multi-Function Station.
86
L Your firewall software is blocking the connection and the setup program may
not list any units. Consult your network administrator and temporarily
disable the firewall software.
L The unit is connected to another network segment and the setup program
may not list any units. Make sure the network is configured correctly.
Consult your network administrator.
For assistance, please visit http://www.panasonic.com/help
11. Help
Problem
Cause & Solution
The [Windows Security Alert]
dialog box appears and asks
if I want to block
[PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2.
– PC printing
– Scanning
– Remote Control
– PC FAX (KX-MB3020 only)
– Device Monitor
L Click [Keep Blocking] and run the Windows Firewall Setting Tool to allow
the data transmission for Multi-Function Station (page 87).
11.3.7 Using an answering machine (KX-MB3020 only)
Problem
Cause & Solution
I cannot receive documents
automatically.
L Your greeting message on the answering machine is too long. Shorten the
message. Record a message less than 10 seconds long.
L The answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
L Check if the answering machine is turned ON and connected to the unit
properly (page 47).
L Set the number of rings on the answering machine to 1 or 2.
I pressed the remote access
code to access the answering
machine remotely, but the line
was disconnected.
L The code may include “#” which is used for certain features provided by
telephone companies. Change the code on the answering machine to
another number which does not include “#”.
Callers complain that they
cannot send a document.
L There is no room left in memory of your answering machine to record voice
messages. See the operating instructions of the answering machine and
erase unnecessary messages.
L You set the answering machine to only give a greeting message.
11.3.8 If a power failure occurs
L The unit will not function.
L If any documents are stored in the memory (i.e. during copying, PC printing), they will be lost.
KX-MB3020 only:
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L Documents during fax transmission or fax reception will be lost.
L When power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
11.3.9 Firewall setting tool for Microsoft Windows XP Service Pack 2/Windows Vista users
(LAN connection only)
After installing Microsoft Windows XP Service Pack 2/Windows Vista, you will not be able to use the following
functions because the Windows Firewall feature will be activated and block the connection.
– Device Monitor
– LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the above
functions properly.
1 Insert the CD-ROM that is supplied with the unit into your CD-ROM drive.
For assistance, please visit http://www.panasonic.com/help
87
11. Help
L If the [Select Language] dialog box appears, select the desired language that you want to use with this
software. Click [OK].
2 [Tools] i [Windows Firewall Setting]
L The [Windows Firewall Setting Tool] window will appear.
3 [Add to the exceptions list] i [OK] i [OK]
To confirm the security settings (For Windows XP users)
1. [Start] i [Control Panel] i [Security Center]
L The [Windows Security Center] window will appear.
2. [Windows Firewall]
L The [Windows Firewall] dialog box will appear.
3. Click the [Exceptions] tab.
4. Confirm that [Panasonic Trap Monitor Service] and [Panasonic LPD] are displayed and checked on the
[Programs and Services] list.
To confirm the security settings (For Windows Vista users)
1. [Start] i [Control Panel] i [Security Center]
L The [Windows Security Center] window will appear.
2. [Windows Firewall]
L The [Windows Firewall] dialog box will appear.
3. [Change settings]
L The [User Account Control] dialog box will appear.
4. [Continue]
5. Click the [Exceptions] tab.
6. Confirm that [Panasonic Trap Monitor Service], [Panasonic LPD Manager] and [Panasonic LPD] are
displayed and checked on the [Program or port] list.
11.3.10 Notice for KX-MB200/KX-MB700/KX-FLB880 series users
If you have already installed KX-MB200/KX-MB700/KX-FLB880 series Multi-Function Station on your computer, the
instructions for modifying or adding printer driver change after installing the KX-MB3000 series Multi-Function Station.
You can modify or add a printer driver, as follows.
1 Start Windows and insert the KX-MB200/KX-MB700/KX-FLB880 series CD-ROM into your CD-ROM drive.
L If the [Select Language] dialog box appears, select the desired language that you want to use with this
software. Click [OK].
2 [Easy installation]
3 [Modify] i [Next]
4 Select [Modify Utility] or [Add Printer Driver]. i [Next]. Then follow the on-screen instructions.
Important:
L For users of versions prior to 1.12, download the latest software as follows, then activate it.
[Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [Support Web
Page]. Then follow the on-screen instructions.
88
For assistance, please visit http://www.panasonic.com/help
12. Paper Jams
12 Paper Jams
Jams
12.1 Recording paper jam
1 Hold the left cover open lever (1), and then pull
open the left cover (2).
Caution:
L Do not pull out the jammed paper forcibly before
opening the left cover.
1
2
L Do not open the paper input tray before opening
the left cover as the jammed paper may be pulled
and the jam may get worse.
3
Caution:
L During or immediately after printing,
the fuser unit (3) gets hot. Wait until
the fuser unit cools down before
removing the jammed paper.
12.1.1 When the recording paper has
jammed inside of the unit
The display will show the following.
“PAPER JAMMED”
b
“OPEN LEFT COVER HOT CAUTION”
89
12. Paper Jams
2 Remove the jammed paper.
L If paper is jammed inside the left cover, see case
1 to case 5 (page 90 to page 92).
L If paper is not jammed inside the left cover, see
case 6 (page 92).
Case 3:
When the recording paper has jammed near the
fuser unit:
1. Push down both green levers (6) until they stop.
Case 1:
When the recording paper has jammed near the
rollers:
Remove the jammed paper (4) carefully by pulling it
upward.
4
6
Case 2:
When the recording paper has jammed near the
drum and toner unit:
Remove the jammed paper (5) carefully by pulling it
upward.
2. When the recording paper has jammed inside
the fuser unit:
Remove the jammed paper (7) carefully by
pulling it toward you.
7
5
90
12. Paper Jams
When the recording paper has jammed over
the fuser unit:
Push down the upper green lever (8), and
remove the jammed paper (9) carefully by
pulling it toward you.
Case 4:
When the recording paper has jammed near the
recording paper exit:
1. Push down both green levers (k) until they stop.
8
9
k
3. Push up the green levers (j) to the original
position.
2. Remove the jammed paper (l) carefully by
pulling it rightward.
l
j
91
12. Paper Jams
3. Push up the green levers (m) to the original
position.
When the recording paper has jammed near the
automatic duplex unit:
Remove the jammed paper (o) carefully by pulling it
toward you.
o
m
Case 5:
When the recording paper has jammed inside of
the automatic duplex unit:
When the recording paper has jammed near the
roller:
Remove the jammed paper (n) carefully by pulling it
upward.
n
92
Case 6:
When the recording paper has jammed near the
standard input tray:
1. Pull the standard input tray (p) until it clicks into
place, then pull it completely out, lifting the front
part of the tray.
p
12. Paper Jams
2. Remove the jammed paper (q) carefully by
pulling it toward you.
12.1.2 When the recording paper has
jammed near the lower input tray
The display will show the following.
“PAPER JAMMED”
b
“OPEN TRAY #2 LEFT COVER”
1 Open the cover (1) at the left side of the lower input
tray.
q
3. Insert the standard input tray into the unit, lifting
the front part of the tray. Then push it completely
into the unit.
1
2 Remove the jammed paper (2).
3 Close the left cover.
2
93
12. Paper Jams
3 Close the cover at the left side of the lower input tray.
12.1.3 When the recording paper is not fed
into the unit properly
The display will show the following.
– “CHECK PICK UP INPUT TRAY #1” (standard
input tray)
– “CHECK PICK UP INPUT TRAY #2” (lower input
tray)
1 Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.
2 Re-load the recording paper.
3 Insert the paper input tray into the unit, lifting the
front part of the tray. Then push it completely into the
unit.
Note:
L If the error message is still displayed, check the
recording paper specifications and load the
recording paper again. See page 13 and page 74 for
details.
94
12. Paper Jams
2 When the document has jammed near the
12.2 Document jams (Automatic
document feeder)
document entrance:
Remove the jammed document (3) carefully.
3
Caution:
L Do not pull out the jammed document forcibly
before lifting the ADF cover.
1 Open the ADF cover (1) while holding the
When the document has jammed near the
document exit:
Open the document tray (4) and remove the
jammed document (5) carefully.
document cover (2).
4
1
5
2
3 Close the ADF cover.
4 Press {Stop} to clear the message.
95
13. Cleaning
3 Close the document cover (5).
13 Cleaning
Cleaning
13.1 Cleaning the white plates
and glass
Clean the white plates and glass when a black line, a
white line or a dirty pattern appears on:
– your recording paper,
– the original document,
– the scanned data, or
– the fax document received by the other party (KXMB3020 only).
Caution:
L Do not use paper products, such as paper towels
or tissues for cleaning.
1 Open the document cover (1).
1
2 Hold the document cover (2) while cleaning the
white plates (3) and the scanner glass (4).
2
3
4
96
5
13. Cleaning
4 Close the ADF cover.
13.2 Cleaning the document
feeder rollers
Clean the rollers when the document frequently
misfeeds.
Caution:
L Do not use paper products, such as paper towels
or tissues for cleaning.
1 Turn the power switch OFF.
2 Open the ADF cover (1) while holding the
document cover (2).
1
2
5 Turn the power switch ON.
3 Clean the document feeder rollers (3) with a cloth
moistened with water, and let all parts dry
thoroughly.
3
97
14. General Information
14 General
Printed
Repor
Information
ts
Specifications
14.1 Reference lists and reports
14.2 Specifications
You can print out the following lists and reports for your
reference.
– “SETUP LIST”
– “TEL NO. LIST”*1
– “JOURNAL REPORT”*1
– “BROADCAST LIST”*1
– “PRINTER TEST”
– “CALLER ID LIST”*1
– “PCL FONT LIST”*1
– “ADDRESS LIST”
– “FTP SERVER LIST”
■ Applicable lines*1:
Public Switched Telephone Network
■ Document size:
Max. 216 mm (81/2") in width, Max. 600 mm (235/8") in
length
■ Effective scanning width:
208 mm (83/16")
■ Effective printing width:
Letter/Legal: 208 mm (83/16")
A4: 202 mm (715/16")
■ Transmission time*1*2:
Approx. 4 s/page (ECM-MMR Memory transmission)*3
■ Scanning density:
Scanning resolution:
Up to 600 × 2,400 dpi (Optical)
Up to 9,600 × 9,600 dpi (Interpolated)
Copy resolution:
Up to 600 × 600 dpi
Fax resolution*1:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch)-in standard
resolution,
7.7 lines/mm (196 lines/inch)-in fine/photo
resolution,
15.4 lines/mm (392 lines/inch)-in super fine
resolution
■ Photo resolution:
64-level
■ Scanner type:
Color Contact Image Sensor
■ Printer type:
Laser Printer
■ Data compression system*1:
Modified Huffman (MH), Modified READ (MR), Modified
Modified READ (MMR)
■ Modem speed*1:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 /
19,200 / 16,800 / 14,400 / 12,000 / 9,600 / 7,200 / 4,800
/ 2,400 bps; Automatic Fallback
■ Operating environment:
10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 70 % RH
(Relative Humidity)
■ Dimensions:
Approx. width 530 mm × depth 460 mm × height 480 mm
(207/8" × 181/8" × 187/8")
■ Mass (Weight):
Approx. 24 kg (53 lb)
■ Power consumption:
Standby: Approx. 7.5 W
Preheat: Approx. 80 W
Copy: Approx. 600 W
Maximum: Approx. 1,150 W (When the fuser lamp turns
on)
■ Power supply:
120 V AC, 60 Hz
*1 KX-MB3020 only
{Menu}
{Set} {<}{>}
1 Press {Menu} repeatedly to display “PRINT
REPORT”.
2 Press {<} or {>} repeatedly to display the desired
item.
3 Press {Set} to start printing. i {Menu}
98
14. General Information
■ Memory capacity
(for operation and storing memory):
64 MB
■ Fax memory capacity*1:
6 MB in total
Approx. 300 pages of memory reception
(max. 255 pages per one reception)
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction Mode.)
■ Scan to email address memory capacity:
5 MB in total (including the header and email message)
■ Scan to FTP server memory capacity:
10 MB in total
■ Laser diode properties:
Laser output: Max. 6.5 mW
Wavelength: 760 nm – 800 nm
Emission duration: Continuous
■ Print speed:
Letter: Approx. 35 ppm (pages per minute)
A4: Approx. 32 ppm (pages per minute)
■ Printing resolution:
Standard: Up to 2,400 × 600 dpi (True: 600 × 600 dpi)
Fine: Up to 2,400 × 600 dpi (True: 1,200 × 600 dpi)
Enhance: Up to 2,400 × 1,200 dpi (True: 1,200 × 1,200
dpi)
*1 KX-MB3020 only
*2 Transmission speed depends on the contents of the
pages, resolution, telephone line conditions and
capability of the other party’s machine.
*3 Transmission speed is based on the ITU-T No. 1 Test
Chart with original mode. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
Recording paper specifications
Plain paper/Thin paper size:
Letter: 216 mm × 279 mm (81/2" × 11")
Legal: 216 mm × 356 mm (81/2" × 14")
A4: 210 mm × 297 mm (81/4" × 1111/16")
Thick paper/Transparency/Label size:
Letter: 216 mm × 279 mm (81/2" × 11")
A4: 210 mm × 297 mm (81/4" × 1111/16")
Recording paper weight:
Simplex: 64 g/m2 to 165 g/m2 (17 lb to 44 lb)
Duplex: 64 g/m2 to 90 g/m2 (17 lb to 24 lb)
Note for recording paper:
L We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
L Do not use the following types of paper:
– Paper with cotton and/or fiber content that is over
20 %, such as letterhead paper or paper used for
resumes
– Extremely smooth or shiny paper, or paper that is
highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such as tabs
or staples
– Paper that has dust, lint or oil stains
– Paper that will melt, vaporize, discolor, scorch or
emit dangerous fumes near 200 °C (392 °F),
such as vellum paper. These materials may
transfer onto the fusing roller and cause damage.
– Moist paper
– Inkjet paper
L Some paper is designed to be printed on only one
side. Try printing on the other side of the paper if you
are not happy with the print quality, or if misfeeding
occurs.
L For proper paper feeding and best print quality, we
recommend using long-grained paper.
L Do not use paper of different types or thicknesses at
the same time. This may cause paper jams.
L Do not use paper printed from this unit for doublesided printing with other copiers or printers. This may
cause paper jams.
L To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.
Note:
L Design and specifications are subject to change
without notice.
L The pictures and illustrations in these instructions
may vary slightly from the actual product.
L The accuracy of the clock is approximately ±60
seconds a month.
99
14. General Information
Toner life
Toner cartridge life depends on the amount of content in
a printed document. Toner cartridge life varies in actual
usage. The following is the approximate number of
pages that the toner cartridge can print according to the
various printing examples.
Example 1
Approx. 5,000 pages can be printed.
Table of Contents1.
1. Table of Contents 1. Introduction and Installation Accessories
1.1 Included accessories.1.2 Accessory information.Finding the Controls
1.3 Description of buttons.1.4 Overview Installation
1.5 Toner cartridge and drum unit
1.6 Document tray 1.7 Output tray1.8 Recording paper2. Preparation
2.1 Connections 2.2 Turning the power switch ON Help Button2.3 Help function Volume
4. PC Operations/ Setup 4.1 Connecting to a computer
4.2 Installing Multi-Function Station 4.3 Starting Multi-Function Station Printing
4.4 Using the unit as a printer Scanning 4.5 Using the unit as a scannerRemote Control
4.6 Operating the unit from your computer.
4.7 Fax sending/receiving using Multi-Function Station
4.8 Registering the computer in the LANnetwork with the optional LAN board
4.9 Confirming the status of the unit 5. Case / Setup
5.1 Selecting the way to use your unit 5.2 Case 1: FAX ONLY
Table of Contents2.
1. Table of Contents
1.1 Included accessories.1.2 Accessory information.Finding the Controls
1.3 Description of buttons.1.4 Overview Installation1.5 Toner cartridge and drum unit
1.6 Document tray 1.7 Output tray1.8 Recording paper2. Preparation
2.1 Connections 2.2 Turning the power switch ON Help Button2.3 Help function Volume
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Example 2
Approx. 2,500 pages can be printed.
Table of Contents1.
1. Table of Contents / Introduction and Installation Accessories
1.1 Included accessories.
1.2 Accessory information.Finding the Controls
1.3 Description of buttons.
1.4 Overview Installation
1.5 Toner cartridge and drum unit
1.6 Document tray
1.7 Output tray
1.8 Recording paper
2. Preparation
2.1 Connections
2.2 Turning the power switch ON Help Button
2.3 Help function Volume
2.4 Adjusting volume Initial Programming
2.5 Dialing mode
2.6 Date and time.
2.7 Your logo.
2.8 Your fax number
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Example 3
Approx. 1,700 pages can be printed.
Table of Contents1.
1. Table of Contents / Introduction and Installation Accessories
1.1 Included accessories.
1.2 Accessory information.Finding the Controls
1.3 Description of buttons.
1.4 Overview Installation
1.5 Toner cartridge and drum unit
1.6 Document tray
1.7 Output tray
1.8 Recording paper
2. Preparation
2.1 Connections
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Note:
L There are various factors that determine the actual
toner cartridge life, such as temperature, humidity,
type of paper and how much toner you use for the
number of pages per print job. The actual number of
pages your toner cartridge will print may be
significantly less than this estimate if your unit is
100
often used for printing small number of pages per job.
Because many of the factors that determine the
actual toner cartridge life cannot be controlled, we
cannot guarantee a minimum number of pages that
will be printed by your toner cartridge.
L The number of pages changes with the depth,
thickness and size of the characters.
L If you turn on the toner save feature, the toner
cartridge will last approx. 20 % longer.
Drum life
The drum cartridge needs to be replaced regularly. The
maximum drum life is approx. 15,000 pages.
Note:
L There are various factors that determine the actual
drum cartridge life, such as temperature, humidity,
type of paper and how much toner you use for the
number of pages per print job. The actual number of
pages your drum cartridge will print may be
significantly less than this estimate if your unit is
often used for printing small number of pages per job.
Because many of the factors that determine the
actual drum cartridge life cannot be controlled, we
cannot guarantee a minimum number of pages that
will be printed by your drum cartridge.
Waste disposal method
Waste material should be disposed of under conditions
which meet all national and local environmental
regulations.
14. General Information
Copyrights
14.3 Information of copyrights and licenses
L This product uses a part of NetBSD kernel.
The use of a part of NetBSD kernel is based on the typical BSD style license below.
Copyright (c)
The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement:
This product includes software developed by the University of California, Berkeley and its
contributors.
4. Neither the name of the University nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
However, parts of the NetBSD Kernel are provided with the following copyright notices.
Copyright (c) 1980, 1983, 1988, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1980, 1986, 1989, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1980, 1986, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1980, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1985, 1986, 1988, 1993, 1994 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1990, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1990, 1993, 1994, 1995 The Regents of the University of California. All
rights reserved.
Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1991, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1988, 1993, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1989, 1993 The Regents of the University of California. All rights reserved.
101
14. General Information
Copyright (c) 1982, 1986, 1990, 1991, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1990, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1990, 1993, 1994 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1991, 1993, 1994 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1991, 1993, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1993, 1994 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1993, 1994, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1993, 1995 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1988, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1983, 1990, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1983, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1985, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1985, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1987, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1987, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1987, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988 Regents of the University of California. All rights reserved
Copyright (c) 1988 Stephen Deering.
Copyright (c) 1988 University of Utah.
Copyright (c) 1988, 1989, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988, 1992, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1989 The Regents of the University of California. All rights reserved.
Copyright (c) 1989, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1989, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1989, 1993, 1994 The Regents of the University of California. All rights reserved.
Copyright (c) 1990, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1990, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1991, 1993, 1994 The Regents of the University of California. All rights reserved.
Copyright (c) 1992 Regents of the University of California. All rights reserved.
Copyright (c) 1992, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1993 Adam Glass
Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
Copyright (c) 1994 Gordon W. Ross
Copyright (c) 1994 Winning Strategies, Inc. All rights reserved.
Copyright (c) 1995 The Regents of the University of California. All rights reserved.
Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. All rights reserved.
Copyright (c) 1996 The Regents of the University of California. All rights reserved.
Copyright (c) 1996 John S. Dyson All rights reserved.
Copyright (c) 1996 Matt Thomas. All rights reserved.
Copyright (c) 1996 Matthew R. Green. All rights reserved.
Copyright (c) 1996 Paul Kranenburg
Copyright (c) 1996, 1997, 1999, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1996, 2000 Christopher G. Demetriou. All rights reserved.
102
14. General Information
Copyright (c) 1996,1999 by Internet Software Consortium.
Copyright (c) 1996-1999 by Internet Software Consortium.
Copyright (c) 1997 Jonathan Stone and Jason R. Thorpe. All rights reserved.
Copyright (c) 1997 Christos Zoulas. All rights reserved.
Copyright (c) 1997 Manuel Bouyer. All rights reserved.
Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 1999, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 1999, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 1999, 2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997,98 The NetBSD Foundation, Inc. All rights reserved.
Copyright (C) 1997-2000 Sony Computer Science Laboratories Inc. All rights reserved.
Copyright (c) 1997-2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com> All rights reserved.
Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999 The NetBSD Foundation, Inc. All rights reserved.
Copyright (C) 1999 WIDE Project. All rights reserved.
Copyright (c) 1999, 2000 Jason L. Wright (jason@thought.net) All rights reserved.
Copyright (c) 1999, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2000, 2001, 2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright 1998 Massachusetts Institute of Technology. All rights reserved.
Copyright 2001 Wasabi Systems, Inc. All rights reserved.
Portions Copyright (c) 1993 by Digital Equipment Corporation.
Portions Copyright (c) 1995 by International Business Machines, Inc.
Copyright (c) 1983, 1989 The Regents of the University of California. All rights reserved.
Copyright (c) 1996 by Internet Software Consortium. All rights reserved.
Copyright (c) 1980, 1986, 1989 Regents of the University of California. All rights reserved.
Copyright (c) 1988 The Regents of the University of California. All rights reserved.
Copyright (c) 1992, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1994 Christopher G. Demetriou. All rights reserved.
Copyright (c) 1997 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1996 Gardner Buchanan <gbuchanan@shl.com> All rights reserved.
Parts of the NetBSD Kernel are provided with the licenses that are slightly different from the above Berkeley-formed
license. Please refer the source code of the NetBSD Kernel about the details.
The source code of the NetBSD Kernel is provided by the NetBSD CVS Repositories
(http://cvsweb.netbsd.org/bsdweb.cgi/), and this product includes parts of the source code in the following directories.
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/kern/
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/net/
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/netinet/
103
14. General Information
L This product contains Net-SNMP software and is using it based on the following license conditions.
---- Part 1: CMU/UCD copyright notice: (BSD like) ----Copyright 1989, 1991, 1992 by Carnegie Mellon University
Derivative Work - 1996, 1998-2000
Copyright 1996, 1998-2000 The Regents of the University of California
All Rights Reserved
Permission to use, copy, modify and distribute this software and its documentation for any purpose and
without fee is hereby granted, provided that the above copyright notice appears in all copies and that
both that copyright notice and this permission notice appear in supporting documentation, and that the
name of CMU and The Regents of the University of California not be used in advertising or publicity
pertaining to distribution of the software without specific written permission.
CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE
UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) ----Copyright (c) 2001-2003, Networks Associates Technology, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may
be used to endorse or promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
104
14. General Information
---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
* The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) ----Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
California 95054, U.S.A. All rights reserved.
Use is subject to license terms below.
This distribution may include materials developed by third parties.
Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
105
14. General Information
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Also this product contains software which includes following notices and licenses.
/***********************************************************
Copyright 1988, 1989, 1990 by Carnegie Mellon University
Copyright 1989 TGV, Incorporated
All Rights Reserved
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and
without fee is hereby granted, provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in supporting documentation, and that the
name of CMU and TGV not be used in advertising or publicity pertaining to distribution of the software
without specific, written prior permission.
CMU AND TGV DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL CMU OR
TGV BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
******************************************************************/
L This product contains NetBSD software and is using it based on the following license conditions.
/** Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
106
14. General Information
L This product contains NetBSD software and is using it based on the following license conditions.
/*
* Copyright (c) 1989 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Tom Truscott.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software must display the following
* acknowledgement:
* This product includes software developed by the University of California, Berkeley and its
* contributors.
* 4. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains NetBSD software and is using it based on the following license conditions.
/*
* Copyright (c) 1987, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software must display the following
* acknowledgement:
* This product includes software developed by the University of California, Berkeley and its
* contributors.
* 4. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
107
14. General Information
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains NetBSD software and is using it based on the following license conditions.
/** Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains thttpd software that ACMELabs developed and is using it based on the following license
conditions.
Copyright 1995,1998,1999, 2000 by Jef Poskanzer <jef@acme.com>.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
108
14. General Information
L This product contains NetBSD software and is using it based on the following license conditions.
/** Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains NetBSD software and is using it based on the following license conditions.
/** Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
109
14. General Information
L This product contains NetBSD software and is using it based on the following license conditions.
/*
* Copyright (c) 1989 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Tom Truscott.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software must display the following
* acknowledgement:
* This product includes software developed by the University of California, Berkeley and its
* contributors.
* 4. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L JPEG
This software is based in part on the work of the Independent JPEG Group.
110
15. Index
15. Index
15.1 Index
#
#100 Quick setup: 55
#101 Date and time: 20
#102 Your logo: 21
#103 Your fax number: 21
#110 Language: 55
#120 Dialing mode: 16
#121 Flash time: 55
#145 LCD display contrast: 55
#155 Change password: 56
#158 Maintenance time: 56
#159 Set all features to default: 56
#161 Ringer pattern: 56
#210 FAX ring count: 56
#216 Automatic Caller ID list: 56
#226 Time adjustment: 56
#289 All directory erase: 59
#380 Paper size in the standard input tray: 57
#382 Paper size in the lower input tray: 57
#383 Paper type: 57
#401 Confirmation report: 41, 59
#402 Automatic journal report: 41, 59
#403 Power save: 57
#411 Overseas mode: 59
#412 Delayed send: 60
#413 ECM selection: 60
#416 Connecting tone: 60
#418 Maximum fax speed: 60
#430 Distinctive Ring: 53
#431 Fax ring pattern: 53
#432 Auto reduction: 61
#434 Fax activation code: 61
#437 Memory reception alert: 61
#438 Friendly reception: 61
#440 Paper input tray setting for fax: 61
#442 PC fax setting: 62
#443 PC fax reception: 22
#445 Legal-size fax send: 62
#448 Fax preview mode: 50
#450 Web fax preview access code: 50
#459 Set fax features to default: 62
#460 Paper input tray setting for copy: 63
#461 Default copy resolution: 63
#462 Contrast hold: 57
#463 Default operation mode: 57
#464 Mode timer: 57
#467 Page layout hold: 63
#468 Zoom hold: 63
#469 Collate hold: 63
#470 Duplex hold: 63
#471 Copy input tray prompt: 63
#482 Toner save: 12, 57
#484 Counter view: 58
#493 Scan mode: 66
#494 Scan parameter hold: 66
#500 DHCP mode: 68
#501 IP address: 68
#502 Subnet mask: 68
#503 Default gateway: 68
#504 DNS server #1: 68
#505 DNS server #2: 68
#507 Machine name: 68
#508 MAC address: 68
#532 Approved users: 69
#533 Auto IP: 69
#534 HTTPD: 69
#535 IPv6 protocol: 69
#565 Paper input tray setting for the scan to email
print feature: 69
#578 All email address erase: 69
#760 Paper input tray in PCL: 64
#762 Number of copies in PCL: 64
#763 Paper size in PCL: 64
#764 Image reduction in PCL: 64
#765 Recording paper direction in PCL: 64
#766 A4 wide printing in PCL: 64
#767 Line per page in PCL: 64
#768 Font source in PCL: 64
#769 Font number in PCL: 65
#770 Font pitch/point in PCL: 65
#771 Symbol set in PCL: 65
#772 Line breaks in PCL: 65
#773 Auto continue mode: 65
#774 Data timeout: 65
#776 Mutual A4/letter print: 65
A Address list: 98
Answering machine: 47
Approved users (Feature #532): 69
Auto continue mode (Feature #773): 65
Auto IP (Feature #533): 69
Automatic document feeder: 18, 35, 42
Auto reduction (Feature #432): 61
B Basic features: 55
Broadcast programming list: 98
Broadcast transmission: 44
C Caller ID: 51
Calling back: 51
Storing: 52
Caller ID list (Feature #216): 56
Character entry: 72
Cleaning: 96, 97
Collate hold (Feature #469): 63
Confirmation report (Feature #401): 41, 59
Connecting tone (Feature #416): 60
Connections: 15
LAN: 15
USB: 23
Contrast: 34, 41
Contrast hold (Feature #462): 57
Copy: 34
Booklet: 39
Collation: 36
Duplex: 36
Easy repeat: 37
N in 1: 38
111
15. Index
N in 1 (Separate): 39
Poster: 38
Proof set: 36
Quick ID: 37
Reserve: 39
Zoom: 35
Copy features: 63
Copy input tray prompt (Feature #471): 63
Counter view (Feature #484): 58
D Data timeout (Feature #774): 65
Date and time (Feature #101): 20
Default copy resolution (Feature #461): 63
Default gateway (Feature #503): 68
Default operation mode (Feature #463): 57
Delayed transmission (Feature #412): 60
DHCP mode (Feature #500): 68
Dialing mode (Feature #120): 16
Directory: 42
All erase (Feature #289): 59
Display
Contrast (Feature #145): 55
Error messages: 77
Distinctive Ring service (Feature #430): 53
DNS server #1 (Feature #504): 68
DNS server #2 (Feature #505): 68
Document size: 17
Drum cartridge: 10
Drum life: 100
Duplex hold (Feature #470): 63
E ECM selection (Feature #413): 60
Email address
All erase (Feature #578): 69
Storing: 66
Error messages: 76, 77
Extension telephone: 47
F Fax activation code (Feature #434): 61
Fax features: 59
Fax number (Feature #103): 21
FAX ONLY mode: 46
Fax preview mode (Feature #448): 50
FAX ring count (Feature #210): 56
Flash time (Feature #121): 55
Friendly reception (Feature #438): 61
FTP server list: 98
H Help: 19
Basic settings: 19
Caller ID: 19
Copier: 19
Directory: 19
Errors: 19
Fax sending/receiving: 19
Feature list: 19
Q and A: 19
Reports: 19
HTTPD (Feature #534): 69
I
IP address (Feature #501): 68
IPv6 protocol (Feature #535): 69
112
J
Jams
Document: 95
Recording paper: 89
Journal report (Feature #402): 41, 59, 98
Junk fax prohibitor: 48
L Label: 28
LAN features: 68
Language (Feature #110): 55
Legal-size fax send (Feature #445): 62
Logo (Feature #102): 21
Lower input tray (optional): 74
M MAC address (Feature #508): 68
Machine name (Feature #507): 68
Maintenance time (Feature #158): 56
Maximum fax speed (Feature #418): 60
Memory reception alert (Feature #437): 61
Mode timer (Feature #464): 57
Multi-Function Station software
Activating: 25
Installing: 23
Uninstalling: 24
Mutual A4/letter print (Feature #776): 65
N Navigator directory
Sending faxes: 43
Storing: 42
Network features: 70
O OCR software: 31
One-touch dial
Sending faxes: 43
Storing: 42
Overseas mode (Feature #411): 59
P Page layout hold (Feature #467): 63
Paper input tray setting
Copy (Feature #460): 63
Fax (Feature #440): 61
PCL (Feature #760): 64
Scan to email print (Feature #565): 69
Paper size
Lower input tray (Feature #382): 57
Standard input tray (Feature #380): 57
Paper type (Feature #383): 57
Password (Feature #155): 56
PC fax reception (Feature #443): 22
PC fax setting (Feature #442): 62
PCL
A4 wide printing (Feature #766): 64
Font number (Feature #769): 65
Font pitch/point (Feature #770): 65
Font source (Feature #768): 64
Image reduction (Feature #764): 64
Line breaks (Feature #772): 65
Line per page (Feature #767): 64
Number of copies (Feature #762): 64
Paper input tray (Feature #760): 64
Paper size (Feature #763): 64
Recording paper direction (Feature #765): 64
Symbol set (Feature #771): 65
15. Index
PCL font list: 98
PC print features: 64
Power failure: 87
Power save (Feature #403): 57
Power switch: 16
Print
Duplex: 27
Email attachment: 28
Special media: 28
Printer test: 98
Programming: 54
Pull scan: 32
Scan application: 32
Viewer: 32
Push scan: 30
Email: 30
Email address: 31
File: 30
FTP: 32
OCR: 31
Viewer: 30
Q Quick scan: 42
Quick setup (Feature #100): 55
Manually: 41
Navigator directory: 43
One-touch dial: 43
Set fax default (Feature #459): 62
Setup list: 98
Storing
Broadcast: 44
Caller information: 52
Email address: 66
Navigator directory: 42
One-touch dial: 42
Subnet mask (Feature #502): 68
T Telephone number list: 98
TEL mode: 47
Time adjustment (Feature #226): 56
Toner cartridge: 10
Toner life: 100
Toner save (Feature #482): 12, 57
Transparency: 28
V Volume: 19
W Web fax preview access code (Feature #450): 50
Z Zoom hold (Feature #468): 63
R Receiving faxes
Automatically: 46
Computer: 49
Manually: 47
Web browser: 50
Recording paper: 13
Recording paper size: 99
Redialing: 41, 43
Reports
Address: 98
Broadcast programming: 98
Broadcast sending: 45
Caller ID: 56, 98
Confirmation: 41, 59
FTP server: 98
Journal: 41, 59, 98
PCL font: 98
Power down: 87
Printer test: 98
Setup: 98
Telephone number: 98
Reset all features (Feature #159): 56
Reset fax features (Feature #459): 62
Resolution: 34, 41
Ringer pattern (Feature #161): 56
Ring pattern for Distinctive Ring (Feature #431): 53
S Scan features: 66
Scan mode (Feature #493): 66
Scanner glass: 17, 34, 41
Scan parameter hold (Feature #494): 66
Scan to email print: 28
Sending faxes
Broadcast: 45
Computer document: 46
From memory: 42
113
Notes
114
Notes
115
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
PNQX1821ZA
CM0109DY0 (CD)
Download PDF

advertising