Polycom RealPresence Group 300, 310, 500, 550, 700 video conferencing system Administrator Guide

Polycom RealPresence Group 300, 310, 500, 550, 700 video conferencing system Administrator Guide

Below you will find brief information for video conferencing system RealPresence Group 300, video conferencing system RealPresence Group 310, video conferencing system RealPresence Group 500, video conferencing system RealPresence Group 550, video conferencing system RealPresence Group 700. These systems are designed for high-definition video conferencing and can be used to connect with other Polycom systems or third-party video conferencing systems. They offer a range of features, including content sharing, recording, and multipoint calling. You can use these systems for a variety of purposes, such as remote meetings, presentations, and training sessions.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Polycom RealPresence Group 300, 310, 500, 550, 700 Administrator Guide | Manualzz
ADMINISTRATOR GUIDE
4.3.0 | May 2015 | 3725-69988-005A
Polycom® RealPresence® Group
Series
Copyright© 2015, Polycom, Inc. All rights reserved. No part of this document may be reproduced, translated into another
language or format, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the
express written permission of Polycom, Inc.
6001 America Center Drive
San Jose, CA 95002
USA
Trademarks Polycom®, the Polycom logo and the names and marks associated with Polycom products are
trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States
and various other countries.
All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any
form or by any means, for any purpose other than the recipient's personal use, without the express written permission
of Polycom.
End User License Agreement By installing, copying, or otherwise using this product, you acknowledge that you
have read, understand and agree to be bound by the terms and conditions of the End User License Agreement for this
product. The EULA for this product is available on the Polycom Support page for the product.
Patent Information The accompanying product may be protected by one or more U.S. and foreign patents and/or
pending patent applications held by Polycom, Inc.
Open Source Software Used in this Product This product may contain open source software. You may receive
the open source software from Polycom up to three (3) years after the distribution date of the applicable product or
software at a charge not greater than the cost to Polycom of shipping or distributing the software to you. To receive
software information, as well as the open source software code used in this product, contact Polycom by email at
[email protected].
Disclaimer While Polycom uses reasonable efforts to include accurate and up-to-date information in this document,
Polycom makes no warranties or representations as to its accuracy. Polycom assumes no liability or responsibility for
any typographical or other errors or omissions in the content of this document.
Limitation of Liability Polycom and/or its respective suppliers make no representations about the suitability of the
information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and
is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall
Polycom and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive or other
damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of
business information), even if Polycom has been advised of the possibility of such damages.
Customer Feedback We are striving to improve our documentation quality and we appreciate your feedback. Email
your opinions and comments to [email protected].
Polycom Support Visit the Polycom Support Center for End User License Agreements, software downloads,
product documents, product licenses, troubleshooting tips, service requests, and more.
2
Contents
Conventions Used in Polycom Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Information Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Typographic Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Audience, Purpose, and Required Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Polycom and Partner Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
The Polycom Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Introducing the Polycom RealPresence Group Series Systems . . . . . . . . . . . . 16
Polycom RealPresence Group Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Polycom RealPresence Group 300 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Polycom RealPresence Group 310 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Polycom RealPresence Group 500 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Polycom RealPresence Group 550 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Polycom RealPresence Group 700 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Set Up Your System Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Recharge the Remote Control Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Position the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Position Polycom RealPresence Group Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Position the Polycom Touch Control Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Position the EagleEye Acoustic Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Position the Polycom EagleEye Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Power-On Self Test (POST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Power On and Off Polycom RealPresence Group 300, 310, and 500 Systems . . . . . . . . 24
Power On and Off Polycom RealPresence Group 550 Systems . . . . . . . . . . . . . . . . . . . 25
Power On and Off Polycom RealPresence Group 700 Systems . . . . . . . . . . . . . . . . . . . 25
Sleep and Wake States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Power Button on the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Polycom RealPresence Group System Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Polycom, Inc.
3
Contents
Connect the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Power On the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Power Off the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Wake Up the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Polycom Touch Control Indicator Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Polycom EagleEye Acoustic Camera Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Polycom EagleEye Director Indicator Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
EagleEye Producer Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Configure the RealPresence Group System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Admin Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Set Up the System Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
RealPresence Group System Software Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Customize the Local Interface Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Display Speed Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Display a Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Change the Background Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Kiosk Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configure Home Screen Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Enable Access to User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Restrict Access to User and Administrative Settings . . . . . . . . . . . . . . . . . . . . . . . . . 36
Display System Information on the Local Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Configure Menu Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Connect to the LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
LAN Status Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Configure LAN Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configure IP Address (IPv4) Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configure IP Address (IPv6) Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configure DNS Servers Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Configure LAN Options Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Configure the Polycom Touch Control LAN Properties . . . . . . . . . . . . . . . . . . . . . . . 43
Configure IP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Network Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
H.323 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configure the System to Use a Gatekeeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
SIP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Configure SIP Settings for Integration with Microsoft Servers . . . . . . . . . . . . . . . . . . 48
Polycom, Inc.
4
Contents
Configure SIP Settings for Integration with the Telepresence Interoperability
Protocol (TIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
RTV and Lync-Hosted Conference Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
AS-SIP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Configure AS-SIP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Multilevel Precedence and Preemption (MLPP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Alternative Network Address Type (ANAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Network Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Lost Packet Recovery and Dynamic Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Configure the System for Use with a Firewall or NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
H.460 NAT Firewall Traversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Basic Firewall/NAT Traversal Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Set SVC Call Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Enable SVC Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Enable Automatic Answering of SVC Point-to-Point Calls . . . . . . . . . . . . . . . . . . . . . . . . 57
Set Preferred Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Find Your System IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Monitors and Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Configure Monitor Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Monitor Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Record Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
RealPresence Capture Server Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
RealPresence Group 700 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Maximize HDTV Video Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Use Sleep Settings to Prevent Monitor Burn-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Set Up CEC Monitor Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Enable Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Enable or Disable CEC on the RealPresence Group System . . . . . . . . . . . . . . . . . . 63
Polycom Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Polycom EagleEye IV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Polycom EagleEye III . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Polycom EagleEye Acoustic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Polycom EagleEye Producer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Polycom EagleEye Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Polycom EagleEye II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Polycom EagleEye HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Polycom EagleEye 1080 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Polycom EagleEye View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
SDI Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Polycom, Inc.
5
Contents
Connect Cameras to RealPresence Group Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Power Cameras with RealPresence Group Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Configure Video Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Configure General Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Configure Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Configure a Third-Party Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Set Up the EagleEye Producer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Update EagleEye Producer with RealPresence Group Series . . . . . . . . . . . . . . . . . . 72
Update the EagleEye IV Camera Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Change Camera Tracking Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Stop and Start Camera Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
View System Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Configure the Polycom EagleEye Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Calibrate the EagleEye Director Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Adjust the Room View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Enable and Disable Camera Tracking with EagleEye Director . . . . . . . . . . . . . . . . . . 76
Enable Camera Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Experience High-Definition Video Conferencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Send Video in High Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Receive and Display Video in High Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Use Full-Motion HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Microphones and Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Audio Input Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
RealPresence Group 300, RealPresence Group 310, and RealPresence Group 500,
and RealPresence Group 550 Microphone Input Options . . . . . . . . . . . . . . . . . . . . . 80
RealPresence Group 700 Microphone Input Options . . . . . . . . . . . . . . . . . . . . . . . . . 80
Available Microphone Inputs by System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Audio Input Tips by Microphone Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Polycom RealPresence Group System Table or Ceiling Microphone Arrays . . . . . . . 81
Polycom EagleEye View and EagleEye Acoustic Microphones . . . . . . . . . . . . . . . . . 82
Polycom SoundStation IP 7000 Conference Phone . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Non-Polycom Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
SoundStructure Digital Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Polycom Microphone Placement to Send Stereo from Your Site . . . . . . . . . . . . . . . . . . . 83
Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Speaker Placement to Receive Stereo from Far Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Set the Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Configure Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
General Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Polycom, Inc.
6
Contents
Audio Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Audio Output Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Stereo Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Audio Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Test StereoSurround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Set Up Third-party Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Configure DVD Player Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Play a Videotape or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Connect Computers to Polycom RealPresence Group Systems . . . . . . . . . . . . . . . . . . . . . . 96
Configure Content Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Configure Content Display with People+Content IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Use the Polycom VisualBoard Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Configure the Polycom UC Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Configure Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Through a Dial-Up Connection to the System’s RS-232 Serial Port . . . . . . . . . . . . . . . . 100
Through the Serial RS-232 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Through the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Place and Answer Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Configure Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Set the Call Answering Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Enable Flashing Incoming Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Multipoint Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Enter a Multipoint Option Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Select a Multipoint Viewing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Include an Additional Audio Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Enable and Disable Audio Add In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Include Multiple Sites in a Cascaded Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Manage Directories in the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Browse Global Directory Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Manage Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Import and Export Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Types of Favorites Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Connect to Microsoft Exchange Server Calendaring Service . . . . . . . . . . . . . . . . . . . . . 113
Call from the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Use the Web Interface Place a Call Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Place a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Polycom, Inc.
7
Contents
Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Support Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Stop and Start Video in a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Place Calls in Kiosk Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Configure Security Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Manage System Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
External Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Login and Credentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Local Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Remote Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Manage User Access to Settings and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Detect Intrusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Secure API Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Enable and Disable Secure API Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Access the API with SSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Configure Admin ID and Password for the Polycom Touch Control . . . . . . . . . . . . . . . . 127
Local Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Password Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Account Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Enable a Whitelist and Add IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
IPv4 Address Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
IPv6 Address Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Port Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Configure Encryption Settings for SVC Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Configure Encryption Settings for Integration with Microsoft Servers . . . . . . . . . . . . 136
H.323 Media Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
List of Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Enable Visual Security Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Manage Certificates and Revocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Generate Certificate Signing Requests (CSRs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Install Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Configure Certificate Validation Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Configure Certificate Revocation Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Certificates and Security Profiles within a Provisioned System . . . . . . . . . . . . . . . . 143
Delete Certificates and CRLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
RealPresence Server Address Configuration in PKI-enabled Environments . . . . . . 144
Polycom, Inc.
8
Contents
Set Up Security Banners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Configure a Meeting Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Manage the System Remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Use the Polycom RealPresence Group System Web Interface . . . . . . . . . . . . . . . . . . . . . . 147
Access the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Monitor a Room or Call with the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Manage System Profiles with the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Send a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Configure Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Set Up a Directory Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Set Up SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Download MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Set Up SNMP Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Use a Provisioning Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Enable or Disable the Provisioning Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Set Up Multitiered Directory Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Keep your Software Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Control and Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Configure Remote Control Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Configure the Remote Control Channel ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Connect Control and Accessibility Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Connect Non-Polycom Touch Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Configure RS-232 Serial Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Set Up the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Pair and Unpair a Polycom Touch Control Device and a
Polycom RealPresence Group System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Unpair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Remote Management of the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Enable SmartPairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Configure Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Configure Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Configure RealPresence Group System Location Settings . . . . . . . . . . . . . . . . . . . . . . 166
Configure RealPresence Group System Language Settings . . . . . . . . . . . . . . . . . . . . . 167
Configure RealPresence Group System Date and Time Settings . . . . . . . . . . . . . . . . . 167
Configure Polycom Touch Control Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Configure Sleep Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Polycom, Inc.
9
Contents
Diagnostics, Status, and Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Polycom RealPresence Manageability Instrumentation Solution . . . . . . . . . . . . . . . . . . . . . 170
Diagnostics Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Local Interface System Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Web Interface Diagnostics Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
System Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
View Call Statistics Using the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Audio and Video Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Set Up System Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Configure System Log Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Configure System Log Level and Remote Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Retrieve Log Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Download or Transfer System Log Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Transfer Polycom Touch Control Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Transfer EagleEye Director Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Call Detail Report (CDR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Information in the CDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Troubleshoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Place a Test Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Reset a RealPresence Group System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Perform a Factory Restore on the Polycom RealPresence Group System . . . . . . . . . . . . . . 186
Use the Restore Button for a Factory Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Use a USB Device for a Factory Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Delete Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Perform a Factory Restore on the Polycom Touch Control . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Perform a Factory Restore on the Polycom EagleEye Director . . . . . . . . . . . . . . . . . . . . . . 189
Perform a Factory Restore on the EagleEye Producer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
How to Contact Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Polycom Solution Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
System Back Panel Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Polycom RealPresence Group 300 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Polycom RealPresence Group 310 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Polycom RealPresence Group 500 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Polycom RealPresence Group 550 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Polycom RealPresence Group 700 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Polycom, Inc.
10
Contents
Port Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Connections to RealPresence Group Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Connections from RealPresence Group Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Security Profile Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Maximum Security Profile Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Change Maximum Security Profile Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Other Restrictions when Using the Maximum Security Profile . . . . . . . . . . . . . . . . 218
High Security Profile Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Change High Security Profile Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Medium Security Profile Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Change Medium Security Profile Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Low Security Profile Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Call Speeds and Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Point-to-Point Call Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Multipoint Call Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
High-Profile Call Speeds and Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Multipoint Resolutions for High Definition Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Resolution and Frame Rates for Content Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
Polycom, Inc.
11
Conventions Used in Polycom Guides
Polycom guides contain terms, graphical elements, and a few typographic conventions. Familiarizing
yourself with these terms, elements, and conventions will help you successfully perform tasks.
Information Elements
Polycom guides may include any of the following icons to alert you to important information.
Icons Used in Polycom Guide
Name
Icon
Description
Note
The Note icon highlights information of interest or important information
needed to be successful in accomplishing a procedure or to understand
a concept.
Caution
The Caution icon highlights information you need to know to avoid a
hazard that could potentially impact device performance, application
functionality, or successful feature configuration.
Warning
The Warning icon highlights an action you must perform (or avoid) to
prevent issues that may cause you to lose information or your
configuration setup, and/or affect phone, video, or network performance.
Web Info
The Web Info icon highlights supplementary information available online
such as documents or downloads on support.polycom.com or other
locations.
Polycom, Inc.
12
Conventions Used in Polycom Guides
Typographic Conventions
A few typographic conventions, listed next, are used in Polycom guides to distinguish types of in-text
information.
A
Typographic Conventions
Convention
Description
Bold
Highlights interface items such as menus, menu selections, window and dialog names,
soft keys, file names, and directory names when they are involved in a procedure or user
action. Also used to highlight text to be entered or typed.
Italics
Used to emphasize text, to show example values or inputs (in this form: <example>), and
to show titles of reference documents available from the Polycom Support Web site and
other reference sites.
Blue Text
Used for cross references to other sections within this document and for hyperlinks to
external sites and documents.
Courier
Used for code fragments and parameter names.
Polycom, Inc.
13
Before You Begin
The Administrator Guide for the Polycom RealPresence Group Series is for administrators who need to
configure, customize, manage, and troubleshoot Polycom® RealPresence® Group systems. The guide
covers the RealPresence Group 300, RealPresence Group 310, RealPresence Group 500, RealPresence
Group 550, and RealPresence Group 700 systems.
Please read the Polycom RealPresence Group system documentation before you install or operate the
system. The following related documents for RealPresence Group systems are available from
www.polycom.com/videodocumentationsupport.polycom.com/PolycomService/support/cn/support/video/g
roup_series/:
● Polycom RealPresence Group Series and Accessories Installation Guide Software and Options,
which describes how to install Polycom RealPresence Group systems and accessories
● Polycom RealPresence Group Series User Guide and the Polycom RealPresence Group Series and
the Polycom Touch Contro User Guide, which describe how to perform video conferencing tasks
● Setup sheets for your hardware
● Release notes
● Polycom RealPresence Group Series Integrator Reference Guide, which provides cable information
and API command descriptions
● Regulatory Notices for the Polycom RealPresence Group Series, which describes safety and legal
considerations for using Polycom RealPresence Group systems
Polycom recommends that you record the serial number and option key of your RealPresence Group
system here for future reference. The serial number for the system is printed on the unit.
System Serial Number: ____________________________________________
Option Key: ____________________________________________________
Audience, Purpose, and Required Skills
The primary audience for this guide is administrators who need to configure, customize, manage, and
troubleshoot Polycom RealPresence Group systems. This guide provides concepts and general guidance
to the system administrator. Polycom expects the administrator to be a mid-grade IT professional who is
experienced in system administration.
Get Help
For more information about installing, configuring, and administering Polycom products, refer to
Documents and Downloads at Polycom Support.
Polycom, Inc.
14
Before You Begin
For support or service, please contact your Polycom distributor or go to Polycom Support at
support.polycom.com.
Polycom and Partner Resources
To find all Polycom partner solutions, see Strategic Global Partner Solutions.
The Polycom Community
The Polycom Community gives you access to the latest developer and support information. Participate in
discussion forums to share ideas and solve problems with your colleagues. To register with the Polycom
Community, simply create a Polycom online account. When logged in, you can access Polycom support
personnel and participate in developer and support forums to find the latest information on hardware,
software, and partner solutions topics.
Polycom, Inc.
15
Introducing the Polycom RealPresence
Group Series Systems
The following topics provide an overview of the Polycom® RealPresence® Group systems, including
information on setting up, positioning, and starting the system and cameras:
● Polycom RealPresence Group Systems
● Set Up Your System Hardware
● Position the System
● Power On and Off
● Configure the RealPresence Group System
● RealPresence Group System Software Options
● Customize the Local Interface Home Screen
● Configure Menu Settings
Polycom RealPresence Group Systems
Your Polycom® RealPresence® Group system is a state-of-the-art visual collaboration tool. With crisp, clean
video and crystal-clear sound, Polycom RealPresence Group systems provide natural video conferencing
interaction using the most robust video communications technology. To fit your space and functional
requirements, there are several RealPresence Group systems available.
For technical specifications and detailed descriptions of features available for RealPresence Group
systems, please refer to the product literature available at www.polycom.com.
Polycom RealPresence Group 300 Systems
For smaller meeting rooms, huddle rooms, and offices, the RealPresence Group 300 system delivers
high-quality and easy-to-use video collaboration at an affordable price.
Polycom RealPresence Group 300 system
Single-cable connections to the camera and display simplify setup, and sharing content is easy with the
Polycom People+Content™ IP application. Its sleek design allows it to be easily hidden away, or taken
outside the room or building for mobile applications.
Polycom, Inc.
16
Introducing the Polycom RealPresence Group Series Systems
Polycom RealPresence Group 310 Systems
For conference rooms and other meeting environments, the RealPresence Group 310 system delivers
powerful video collaboration performance in a sleek design that is easy to configure and use.
Polycom RealPresence Group 310 system
You can share content using the Polycom People+Content application and a wired HDMI or VGA
connection. Its sleek design allows it to be hidden away, or taken outside the room or building for mobile
applications. This system supports single monitor output; an option key is required to connect a second
monitor. Multipoint conference calls are not supported.
Polycom RealPresence Group 500 Systems
For conference rooms and other meeting environments, the RealPresence Group 500 system delivers
powerful video collaboration performance in a sleek design that is easy to configure and use.
Support for dual monitors and multiple options for sharing content make it an ideal fit for most standard-sized
meeting rooms.
Polycom RealPresence Group 500 system
Single-cable connections for video and audio simplify setup, while the efficient design enables discreet
placement of the device. Plus, the small design makes it ideal for mobile applications, whether moved to
different locations within a building, or used as part of a mobile video kit.
Polycom RealPresence Group 550 Systems
For conference rooms and other meeting environments, the RealPresence Group 550 system delivers
powerful video collaboration performance in a compact design that is easy to install, configure, and use.
Polycom, Inc.
17
Introducing the Polycom RealPresence Group Series Systems
Triple-monitor support makes it an ideal fit for conferences with high requirements on both local, remote,
and content video outputs. With its rich integrator-class connectors, it can satisfy various integration
environments.
Polycom RealPresence Group 700 Systems
For boardrooms, lecture halls, and other environments where only the best will do, the RealPresence Group
700 system offers extreme video collaboration performance and flexibility.
Polycom RealPresence Group 700 system
Powerful video processing and several input and output options make it ideal for rooms with complex
requirements, such as multiple displays, cameras, and content sources. The intuitive interface that comes
standard on all RealPresence Group products makes it easy for even novice users to control the system
and get the most out of their video collaboration experience with no hassles.
Set Up Your System Hardware
This manual provides information to supplement the setup sheets provided with your system and its optional
components. A printed copy of the system setup sheet is provided with each RealPresence Group system.
PDF versions of the system setup sheets are available at support.polycom.com.
Recharge the Remote Control Battery
Your system setup sheet shows how to charge the battery in the remote control the first time. When the
remote control battery power is at 10% or less, a notification is displayed on the home screen. Although
other notifications override the low battery notification, the low battery notification returns after you dismiss
the other notifications. The low battery notification is not displayed while the system is in a call.
To recharge the remote control battery:
1 Pull the battery out of the end of the remote control.
2 Insert the USB plug into any USB 2.0 port, such as the one on your system. The RealPresence
Group 300, RealPresence Group 310, and RealPresence Group 500 systems have two USB 2.0
ports on the back of the systems, while the RealPresence Group 700 has one USB 2.0 port on the
front of the system.
The RealPresence Group 550 systems have two USB 2.0 ports, on the front and back of the system
respectively. However, you must charge the system with the USB port on the back panel only.
3 While the battery is charging, the status light is orange. After the status light on the battery turns
green, remove it from the port.
4 Insert the charged battery into the remote control.
Polycom, Inc.
18
Introducing the Polycom RealPresence Group Series Systems
Note: Recharging time
Recharging the battery might take from 20 minutes to multiple hours.
The following figure illustrates these steps for the RealPresence Group 550 systems.
Charging the Remote Control Battery for a RealPresence Group 550 System
The following figure illustrates these steps for the RealPresence Group 300, RealPresence Group 310,
RealPresence Group 500, and RealPresence Group 700 systems.
Charge the remote control battery
Polycom, Inc.
19
Introducing the Polycom RealPresence Group Series Systems
Ref.
Number
Description
1
Pull the battery out of the end of the remote control.
2
Insert the USB plug of the battery into a USB 2.0 port.
3
Wait until the status light on the battery turns green.
4
Insert the charged battery into the remote control.
Position the System
Polycom RealPresence Group products are versatile enough to accommodate being set up in a variety of
ways. This section describes placement for your RealPresence Group system, Touch Control, EagleEyeTM
Acoustic camera, and EagleEye Director automatic camera positioning system.
Position Polycom RealPresence Group Systems
RealPresence Group systems are designed to be placed on tabletops or in equipment racks. If the system
or any accessories are installed in an enclosed space, such as a cabinet, ensure that the air temperature in
the enclosure does not exceed 40°C (104° F). You might need to provide forced cooling to keep the
equipment within the operating temperature range.
Caution: Allow ventilation
Keep ventilation openings free of any obstructions.
To position the system:
1 Do one of the following:
 If you plan to place the system on a table or open shelf, attach the self-adhesive feet to the bottom
of the system.
 If you plan to mount a RealPresence Group 700 system in an equipment rack, install the mounting
brackets, as shown in the following figure.
Mount the RealPresence Group 700 system
Note: Mounting bracket differences
Polycom RealPresence Group 300, 310, and 500 systems use a different type of mounting bracket.
For more information, refer to support.polycom.com or contact your Polycom distributor.
2 Place the system in the desired location, keeping in mind the following pointers:
Polycom, Inc.
20
Introducing the Polycom RealPresence Group Series Systems
 Position the system so that the camera does not face toward a window or other source of bright
light.
 Leave enough space to connect the cables easily.
 Place the camera and display together so that people at your site face the camera when they are
looking at the display.
Position the camera and display together
Position the Polycom Touch Control Device
Polycom RealPresence Group systems can be controlled by the Polycom Touch Control. When the Polycom
Touch Control is not paired with a RealPresence Group system, the device can be used as a virtual remote
control. To use the Polycom Touch Control as a virtual remote control, ensure that the infrared (IR)
transmitter on the front of the device is facing the RealPresence Group system you want to control. Also,
make sure that the Touch Control is conveniently located for use during a meeting.
Position the EagleEye Acoustic Camera
The Polycom EagleEyeTM Acoustic camera is designed to be placed on top of your monitor, as shown in the
following graphic.
EagleEye Acoustic Camera positioning
Polycom, Inc.
21
Introducing the Polycom RealPresence Group Series Systems
Position the Polycom EagleEye Director
The Polycom EagleEye Director is an automatic HD tracking system that works with RealPresence Group
systems. Refer to Polycom EagleEye Director for more information about the automatic camera positioning
system.
Follow these guidelines when you use the EagleEye Director with your RealPresence Group system:
● Avoid setting the Polycom EagleEye Director in the corner of a room. The EagleEye Director should
be at least 12 inches away from all of the walls.
● Make sure the EagleEye Director is on a level surface or mounting bracket.
● The camera’s viewing angle is approximately 9 degrees above and 30 degrees below its direct line
of sight, as shown in the following graphic.
EagleEye Director viewing angle
+9º
-30º
● To ensure optimal performance of the Polycom EagleEye Director facial recognition feature, follow
these suggestions:
 Provide ample lighting on faces of participants. This allows the system to correctly frame faces,
using the eyes, noses, and mouths as guidelines.
 Allow only minimal backlighting.
● To ensure the best view from the Polycom EagleEye Director voice-tracking feature, follow these
suggestions:
 Make sure ambient room noise is quiet enough to allow the system to locate the participant who
is speaking.
 Be sure to set up the audio connection from the RealPresence Group system to the EagleEye
Director, whether you connect it directly to the audio output of the RealPresence Group system
or to an audio processor managing the room audio.
 Set the EagleEye Director on top of a monitor. Ideally, place the camera between 5.5 and 7 feet
from the ground.
Polycom, Inc.
22
Introducing the Polycom RealPresence Group Series Systems
EagleEye Director placement
 Ensure that people are sitting within the viewing range of between 3 and 22 feet from the device.
EagleEye Director viewing range
Polycom, Inc.
23
Introducing the Polycom RealPresence Group Series Systems
Power On and Off
After you have connected all of the equipment that you will use with the RealPresence Group system,
connect the power and power on the system. Make sure that the system is powered off before you connect
devices to it. It is important to note that Polycom RealPresence Group 300, 310, 500, and 700 systems do
not have what you might think of as a power button—they have a power proximity sensor. Instead of
pressing an actual button that moves, you touch the sensor (or near the sensor) that indicates power
on the front of the system.
For instructions on how to power on and off the Polycom Touch Control, refer to Connect the Polycom Touch
Control.
Power-On Self Test (POST)
After being powered on, the RealPresence Group systems automatically perform system health checks
before the system is initialized. This process is known as a power-on self test, or POST. The status of the
POST sequence is displayed with the LED indicator light on the front of the device, or in the case of the
RealPresence Group 700 system, in the text field display on the front of the device. For more information
about what the colors of the indicator lights mean, refer to Polycom RealPresence Group System Indicator
Lights. When the POST sequence completes with no severe errors, the RealPresence Group system starts
normally.
Test results for the RealPresence Group 300, 310, 500, and 700 systems are logged in the system memory.
If any warnings occur during POST on RealPresence Group 300, 310, 500, and 700 systems, you can view
them after the system starts by going to Settings > System Information > Status > Active Alerts in the
local interface or Diagnostics > System > Active Alerts in the web interface. If a severe error occurs during
startup, the system does not start up. Contact Polycom technical support.
Viewing POST warnings and alerts is not supported on RealPresence Group 550 systems.
Power On and Off Polycom RealPresence Group 300, 310, and 500
Systems
The RealPresence Group 300, 310, and 500 systems are powered off and on using the same steps.
To power on the RealPresence Group 300, 310, or 500 system, do one of the following:
● If the system is asleep, press any button on the remote control or pick up the remote control to wake
the system up.
● Press
on the remote control.
● Touch the power sensor on the front of the system.
The Polycom screen is displayed within about 10 seconds.
To power off the RealPresence Group 300, 310, or 500 system, do one of the following:
● Press and hold
on the remote control.
Refer to Configure Remote Control Behavior for more information about programming the remote
control.
Polycom, Inc.
24
Introducing the Polycom RealPresence Group Series Systems
● Touch and hold the power sensor on the front of the system. The indicator light changes color and
blinks, indicating that the system is shutting down. Release the power sensor when the indicator light
changes color.
Power On and Off Polycom RealPresence Group 550 Systems
To use the remote control to turn the system on and off, see Configure Remote Control Behavior for
information about programming the remote control.
To power on the RealPresence Group 550 system, do one of the following:
● Switch on the power. The power switch is located on the back of your system.
The Polycom screen is displayed within about 10 seconds.
● If you have hardware version 2 or later of the RealPresence Group 550 system, press and hold
on the remote control. If the system is asleep, press any button on the remote control or pick up the
remote control to wake up the system.
To power off the RealPresence Group 550 system:
● Switch off the power. The power switch is located on the back of your system.
● If you have hardware version 2 or later of the RealPresence Group 550 system, press and hold
on the remote control.
Power On and Off Polycom RealPresence Group 700 Systems
The RealPresence Group 700 system can be powered on and off with the remote using the same buttons
as shown for the RealPresence Group 300, 310, and 500 systems; however, the Group 700 system
supports a low-power standard that limits the power supplied to the camera when the system is powered
off. So, if the EagleEye IV or EagleEye III camera is receiving its power only from the HDCI connector
attached to the system, it will not have an active IR receiver capable of powering on the system using the
handheld remote when in the Power Off state.
If the camera IR is the only exposed IR and you normally power the system on and off with the handheld
remote control, use one of these solutions:
● Provide direct power to the EagleEye III or EagleEye IV camera with the optional EagleEye camera
power supply, 1465-52748-040. This allows the IR sensor to remain in a Power On state, so that the
camera is capable of receiving IR commands from the remote control.
● Position the RealPresence Group system so that the IR receiver on the front of the system has a
line-of- sight to the remote control.
● Use a third-party IR extender to extend the IR signal from the room to the IR receiver on the front of
the RealPresence Group system.
Sleep and Wake States
The RealPresence Group systems support Sleep and Wake states in which the system provides power to
the EagleEye IV or EagleEye III camera. This allows the EagleEye IV or EagleEye III camera to wake from
a Sleep state through a signal received by the camera's IR sensor. The camera does not require any
additional power supply or IR extender.
Polycom, Inc.
25
Introducing the Polycom RealPresence Group Series Systems
Power Button on the Remote Control
You can use the remote control to power on and off your RealPresence Group system, or to put the
RealPresence Group 550 system to sleep or wake it. Program this behavior using the web interface.
Polycom RealPresence Group System Indicator Lights
The following figure shows the location of the power sensor and indicator light on the front of the Polycom
RealPresence Group 300 system, RealPresence Group 310 system, and RealPresence Group 500 system.
RealPresence Group 300/310/500 indicator lights
Ref.
Number
Description
1
LED indicator light
2
Power sensor
The following figure shows the location of the indicator light on the front of the Polycom RealPresence Group
550 systems.
RealPresence Group 550 Indicator Light
The following figure identifies the features on the front of the RealPresence Group 700 system.
Polycom, Inc.
26
Introducing the Polycom RealPresence Group Series Systems
RealPresence Group 700 indicator lights
Ref.
Number
Description
1
LED indicator light
2
Power sensor
3
Status display area
4
USB 2.0 port
5
Restore button
Use the USB port for any USB 2.0 device.
Note: Maximum Security Profile status display area
If your RealPresence Group 700 systems operates with the Maximum Security Profile, the status
display area does not display the software version or IP address.
Brief status and diagnostic messages are displayed in the status display area of the RealPresence Group
700 system. The LED on the front of all RealPresence Group systems provides the following information.
Indicator Light
System Status
Off
System is powered off.
Blinking blue light
In a POST sequence, no errors are occurring and tests are successful. The
system continues to blink blue and initializes after the sequence is complete
if no severe errors occur.
Blinking amber light
In a POST sequence, at least one test has resulted in a warning error. The
system continues to blink amber but initializes after the sequence is
complete if no severe errors occur.
Blinking red light
In a POST sequence, at least one test has resulted in a severe error. The
system continues to blink red and will not start up.
Polycom, Inc.
27
Introducing the Polycom RealPresence Group Series Systems
Indicator Light
System Status
Steady blue light
System is initializing.
System is awake.
Blinking blue light
System received an IR (infrared) signal.
System is receiving a call.
Steady amber light
System is asleep.
Alternating blue and amber lights
System is in software update mode.
System is in factory restore mode.
Fast blinking amber light
System is shutting down.
Steady green light
System is in a call.
Connect the Polycom Touch Control
This section describes how you can make connections so that you can power on, power off, and wake up
the Touch Control. For information about setting up and using the Touch Control, refer to Set Up the
Polycom Touch Control.
Power On the Polycom Touch Control
Before you can power on the Polycom Touch Control, you must connect the Ethernet cable to the device
and to a wall outlet.
To power on the Polycom Touch Control:
1 Connect the Ethernet cable to the underside of the Polycom Touch Control.
2 Plug the Ethernet cable into the wall outlet. Do one of the following:
 If your room provides Power Over Ethernet, you can connect the Ethernet cable directly to a LAN
outlet.
 If your room does not provide Power Over Ethernet, you must connect the Ethernet cable to the
optional power supply adapter. Then connect the power supply adapter to a LAN outlet and power
outlet. The power supply adapter is sold separately.
The Polycom Touch Control powers on and displays the language selection screen.
Power Off the Polycom Touch Control
To power off the Polycom Touch Control:
1 From the Touch Control Home screen, touch
User Settings.
2 Scroll to the Power section.
3 Select Touch Control Power.
4 In the menu that appears, select Power Off the Touch Control. If you choose to power off the
Polycom Touch Control, you must disconnect and reconnect the LAN cable to power it on again.
Polycom, Inc.
28
Introducing the Polycom RealPresence Group Series Systems
Wake Up the Polycom Touch Control
The Touch Control goes to sleep after 2 minutes of inactivity.
To wake up the Polycom Touch Control:
» Touch the screen to wake it up.
Polycom Touch Control Indicator Light
When the Polycom Touch Control is on, the
Home button is lit.
Polycom EagleEye Acoustic Camera Indicator Lights
The following figure shows the location of the LED on the front of the EagleEye Acoustic camera.
EagleEye Acoustic indicator lights
Ref.
Number
Description
1
IR Sensor
2
System Status
The system status light provides the following information.
Indicator Light
System Status
Steady blue light
System is on and awake.
Blinking blue light
Camera firmware is being updated.
Steady amber light
System is asleep.
Steady green light
System is in a call.
Polycom EagleEye Director Indicator Light
The following figure shows the location of the power indicator light on the back of the Polycom EagleEye
Director.
Polycom, Inc.
29
Introducing the Polycom RealPresence Group Series Systems
EagleEye Director indicator light
This indicator light provides the following information.
Indicator Light
Status
Steady green light
Cameras are ready; camera tracking is off
Steady red light
Cameras are powering on
Blinking red light
Factory restore on the cameras is starting
Blinking blue light
Camera tracking is on
EagleEye Producer Indicator Lights
A light-emitting diode (LED) is integrated into the front of the EagleEye Producer unit. Different LED lights
refer to different system states. These allow you to identify the current system state for the EagleEye
Producer system. Detailed LED and system states mappings are shown in the following table.
LED
System State
Blue
Power On, EagleEye Producer Normal State
Blinking Blue
On, Not in a Call, Receive IR
EagleEye Producer Boot Up
Fast Blinking Blue
Calibrate Webcam Room View
Amber
Standby - Asleep
Alternate Amber and Blue
Software update, Factory restore, USB image update
Blinking Amber
USB disk plugged in
Green
On, In a call
Blinking Green
On, In a call, Receive IR in a call
Fast Blinking Red
System error
Blink
Needs attention, Receive IR
Polycom, Inc.
30
Introducing the Polycom RealPresence Group Series Systems
Configure the RealPresence Group System
This section describes how to configure your RealPresence Group system by using the setup wizard that
walks you through the initial steps. It also explains how to access administrative settings in the local and
web interfaces.
Setup Wizard
When you power on your system for the first time, the setup wizard leads you through the minimum
configuration steps required to place a call.
The setup wizard allows you to set an Admin ID and password, which allows you to limit access to the Admin
Settings. The default Admin ID is admin and the default admin password is the 14-digit system serial
number on the Settings > System Information > Information > System Detail screen in the local interface
or on the back of the system. Admin and User IDs are not case sensitive.
Note: Remember admin password
Make sure you can recall the admin password if you set one. If you forget the password, you must use
the restore button to run the setup wizard again in order to access the Admin Settings and reset the
password.
You can run the setup wizard or view the configuration screens in either of the following two ways.
● In the room with the system—You can navigate the screens and enter information by using the
remote control and the onscreen keyboard. When you reach a text field, press the Select button on
the remote control to display the onscreen keyboard. Note that the onscreen keyboard is
automatically displayed when you reach the System Name field in the setup wizard.
Be aware that only those configuration screens needed to get the system connected are included in
the local interface. Most of the administrative settings are available only in the web interface.
● From a remote location—If you know the IP address of the system, you can access and configure
it using the web interface. For more information about using the web interface, refer to Use the
Polycom RealPresence Group System Web Interface.
The setup wizard is available during initial setup, after a system reset with system settings deleted, or after
using the restore button.
Admin Settings
After you run the setup wizard, you can view or change the system’s configuration by going to Settings >
Administration in the system’s local interface or Admin Settings in the web interface. The local interface
has a subset of the administration settings that are available in the web interface.
Note: Configuration and security when paired
When a RealPresence Group System is paired with a Polycom Touch Control, the following
statements are true:
• You can change the system’s configuration using the web interface only.
• During pairing, when prompted to enter the Admin ID and Admin Password, but no Admin
password has been configured, you must submit a blank password.
If you enable a provisioning service, any settings provisioned by the Polycom Converged Management
Application™ (CMA®) or Polycom RealPresence® Resource Manager system might be displayed as
Polycom, Inc.
31
Introducing the Polycom RealPresence Group Series Systems
read-only settings in the Admin Settings. For more information about automatic provisioning, refer to the
Polycom CMA or RealPresence Resource Manager system documentation on the Polycom web site.
The Polycom Touch Control has separate admin settings that allow you to update Touch Control software
and configure LAN, regional, and security properties for the Touch Control. Refer to the following sections
for more information:
● Configure the Polycom Touch Control LAN Properties
● Configure Polycom Touch Control Regional Settings
● Configure Admin ID and Password for the Polycom Touch Control
An Admin ID and password might be configured for the Touch Control Administration settings. The default
ID is admin and the default password is 456.
Note: PKI certificates
If your RealPresence Group system will be provisioned by the RealPresence Resource Manager
system and you plan to use PKI certificates, make sure you configure the Host Name setting on the
web interface in Admin Settings > Network > LAN Properties > LAN Options with the same name
as the name that the RealPresence Resource Manager system will provision so that certificate
signing requests (CSRs) generated during certificate installation have the correct host name
information in them. For more information about PKI certificates, refer to Manage Certificates and
Revocation. For more information about provisioning, refer to Use a Provisioning Service.
Set Up the System Name
The system name appears on the screen of the far-end site when you make a call. The RealPresence Group
system interface supports the language fonts listed in the following table. Other languages might not display
correctly.
Supported language fonts
Afrikaans
German
Albanian
Greek
Arabic
Hungarian
Azerbaijani
Icelandic
Basque
Indonesian
Belarusian
Italian
Bulgarian
Japanese
Catalan
Kazakh
Chinese (Simplified)
Korean
Chinese (Traditional)
Kurdish
Croatian
Latvian
Czech
Lithuanian
Danish
Macedonian
Dutch
Norwegian
Estonian
Persian
Faeroese
Polish
Finnish
Portuguese
French
Romanian
Georgian
Russian
Serbian
Slovak
Slovenian
Spanish
Swahili
Swedish
Tajik
Thai
Turkmen
UK English
US English
Uyghur
Ukrainian
Urdu
Uzbek
Vietnamese
Note: System Name limitations
The first character of a System Name must be a letter or a number. The System Name cannot begin
with the dollar sign ($) or underscore (_) character. Polycom supports double-byte characters for the
system name.
Polycom, Inc.
32
Introducing the Polycom RealPresence Group Series Systems
To configure a system name:
1 In the web interface, go to Admin Settings > General Settings > System Settings > System
Name.
2 In the System Name field, enter a name and click Save.
RealPresence Group System Software Options
Some of the features of a RealPresence Group system are optional. To activate the following features, you
must purchase and install a key code:
● Multipoint Video Conferencing: This option enables your system to make video calls to more than
one site at a time. It is available only for RealPresence Group 500, RealPresence Group 550, and
RealPresence Group 700 systems. For more information, refer to Multipoint Calling.
● Telepresence Interoperability Protocol (TIP): This option improves the interoperability of systems
in environments with certain Cisco telepresence systems. For more information, refer to Configure
SIP Settings for Integration with the Telepresence Interoperability Protocol (TIP).
● Video 1080p: This option makes 1080p video and content available to RealPresence Group
systems.
● Dual display: This option enables a second monitor display. Available for RealPresence Group 300
and 310 systems. The other systems support dual monitors without a license key.
● Lync Interoperability License: This option enhances the video experience by enabling the following
Microsoft features for all RealPresence Group systems:
 Real-time video (RTV) provides higher resolutions during video calls when integrated with
Microsoft Lync Server.
 The Microsoft version of H.264 SVC delivers a continuous presence style experience.
 Simulcast H.264 streams are now supported, allowing RealPresence Group systems in
SVC-enabled Lync calls to transmit multiple streams of the local video depending upon the
capabilities of the far-end systems. For example, far-end systems displaying high resolution
images receive high resolution images from the RealPresence Group system, while
simultaneously far-end systems displaying low resolution images receive low resolution images
from the RealPresence Group system.
 Centralized Conferencing Control Protocol (CCCP) enables seamless participation in multipoint
video conferences hosted on Lync's audio/video server.
 Microsoft Lync AVMCU Spotlight feature enables the system to display only the broadcaster’s
video when a participant is made the broadcaster in a call.
 RealPresence Group systems support Forward Error Correction (FEC) DV0 and DV1 in Lync
2013 environments for both H.264 SVC and RTV endpoints. The scheme introduces recovery
packets on the transmitter which recover lost video packets on the receiver. Enabling or disabling
the Lost Packet Recovery feature in the web interface does not affect the negotiation of FEC.
 IPv6 is supported in Lync 2013 environments with IPv6 networks.
For information about integrating with Microsoft Lync Server, refer to the Polycom Unified
Communications Deployment Guide for Microsoft Environments.
Polycom, Inc.
33
Introducing the Polycom RealPresence Group Series Systems
Customize the Local Interface Home Screen
Use the Polycom RealPresence Group system web interface to configure how information is displayed on
the Home screen of the local interface.
Note: Home screen when paired
Home screen customizations have no effect when the RealPresence Group system is paired with a
Polycom Touch Control.
To configure the Home screen using the web interface:
1 In your web browser address line, enter the RealPresence Group system’s IP address.
2 Go to Admin Settings > General Settings > Home Screen Settings.
3 Configure the settings on the Home Screen Settings page that are described in the following
sections.
Display Speed Dial Entries
You use speed dialing to quickly call an IP address designated as a Favorite.
Notes: Speed dial entries when paired
Speed dial entries do not appear when the Polycom RealPresence Group system is paired with a
Polycom Touch Control.
To enable speed dialing in the web interface:
1 Go to Admin Settings > General Settings > Home Screen Settings > Speed Dial.
2 Click the Choose Favorites link to create and select the favorites you want to designate as speed
dial entries.
3 Select the Enable Speed Dial setting and click Save.
To place a call within your company’s telephone system, enter the internal extension instead of the full
number.
For more information about calling, adding, or removing speed dial entries, refer to Speed Dial.
Display a Calendar
If your RealPresence Group system is configured to connect to the Microsoft Exchange Server, you can
view scheduled meetings on the Home screen. If no meetings appear on the Home screen, either the
system is not connected to the Microsoft Exchange Server or no meetings are scheduled.
For more information about using the calendar, refer to the User Guide for the Polycom RealPresence
Group Series.
Change the Background Image
The local interface of the RealPresence Group systems displays a default background image that’s similar
to the “wallpaper” of a computer. You cannot delete this image, but you can upload your own image to
replace it.
Polycom, Inc.
34
Introducing the Polycom RealPresence Group Series Systems
The pixel size of the image you upload must be 1920 x 1080 and the image format must be JPEG.
To upload and use a background image:
1 In the web interface, go to Admin Settings > General Settings > Home Screen Settings >
Background.
2 Click Choose File to search for and select the image you want to upload.
3 When the image name appears next to Choose File, click Upload to display the image as your
background.
Kiosk Mode
Kiosk Mode simplifies the Home screen of the local interface by displaying only speed dial entries and
calendar meetings (if enabled). For information on enabling Kiosk Mode, see Place Calls in Kiosk Mode.
Configure Home Screen Icons
Home Screen Icons are the icons that appear in the lower center of the local interface, three at a time. By
default, users see the icons shown in the following table in this location.
Icon
Name
Menu
Content
This icon appears only when a content source is detected.
Settings
This icon takes you to the Setting screen, where you find System Information, Administration, and, if
enabled, User Settings.
Place a Call
Enable Access to User Settings
User settings allow users to control some aspects of cameras and meetings, for example, allowing other
people in a call to control your camera or whether to enable auto answer for point-to-point or multipoint calls.
To enable access to User settings:
1 Do one of the following:
 In the local interface, go to Settings > Administration > Security > Settings.
 In the web interface, go to Admin Settings > Security > Global Security > Access.
2 Enable the Allow Access to User Settings setting.
Polycom, Inc.
35
Introducing the Polycom RealPresence Group Series Systems
Restrict Access to User and Administrative Settings
You can restrict access to User Settings and Administration settings, making them available only through
the web interface.
To prevent users from using User Settings or Administration Settings in the local interface:
1 In Admin Settings > General Settings > Home Screen Settings > Home Screen Icons, disable
the Show Icons on the Home Screen setting.
2 Click Save.
Note: Showing icons locally
If the following conditions are met, the ability to show icons is automatically enabled and read only:
• Speed Dial is disabled in the Admin Settings > General Settings > Home Screen Settings.
• The Calendar is not displayed because the system is not connected to the Microsoft Exchange
Server.
• Remote Access through the web, telnet, and SNMP are disabled in Security > Global Security >
Access.
Display System Information on the Local Interface
The local interface of the RealPresence Group systems displays an address bar at the bottom of the home
screen. In addition to displaying certain system information on the local interface Menu, you now have the
ability to display the system’s IP address, extension, and SIP address in the address bar.
To display system information in the address bar:
1 In the web interface, go to Admin Settings > General Settings > Home Screen Settings >
Address Bar.
2 Configure the following settings.
Setting
Description
Show IP address on the
home screen
Displays the IP address from Admin Settings > Network > LAN Properties > IP
Address (IPv4) on the left side of the address bar.
Show Extension on the
home screen
Displays the H.323 Extension from Admin Settings > Network > IP Network >
H.323 in the center of the address bar.
Show SIP address on the
home screen
Displays the SIP address from Admin Settings > Network > IP Network > SIP
(the Sign-in Address) on the right side of the address bar.
Note: The Show SIP address setting displays only if your system is configured
with a SIP address.
Configure Menu Settings
The menu settings in the web interface determine some of the information that is displayed in the local
interface main menu. The menu settings are pulled from the system’s network settings. For more
information about network settings, refer to Networks.
Polycom, Inc.
36
Introducing the Polycom RealPresence Group Series Systems
To configure local interface menu settings:
1 In the web interface, go to Admin Settings > General Settings > Menu Settings.
2 Configure these settings, then click Save.
Setting
Description
Show System Information
Specifies whether to show certain system information in the local interface menu.
Display
Specifies whether to display the following information:
• The system’s SIP Address
• The system’s IP Address
• The Extension associated with the system
Note: The SIP Address setting displays only if your system is configured with a
SIP address.
Show System Button
Specifies whether to show a System button in the menu.
Note: The System button in the local interface main menu is not the same as the
System link in the blue bar at the top of the web interface page.
Automatic Self View
Control
Specifies whether the Self View setting is visible in the local interface.
• If Automatic Self View Control is enabled, the Self View setting is not in the
local interface, and the system automatically chooses when to display the self
view window. Whether the self view window is displayed is dependent on
available display space, the display mode, and so on.
• If Automatic Self View Control is not enabled, the user can turn Self View on
and off from the local interface.
Polycom, Inc.
37
Networks
Before you begin configuring network options, make sure your network is ready for video conferencing.
Polycom offers contract high-definition readiness services. For more information, contact your Polycom
distributor.
The topics in this section cover network types used worldwide, but keep in mind that not all network types
are available in all countries. To get started configuring your network, see the following topics:
● Connect to the LAN
● Configure IP Settings
● Set SVC Call Preferences
● Set Preferred Speeds
● Find Your System IP Address
Connect to the LAN
You must connect the system to a LAN to do any of the following with your RealPresence Group system:
● Make H.323 or SIP calls.
● Use a Global Directory Server.
● Register with a management system.
● Access the web interface.
● Use People+Content IP.
● Connect to a Polycom Touch Control.
LAN Status Lights
The LAN connector on the RealPresence Group 300, 310, 500, and 700 systems has two lights to indicate
connection status and traffic.
Indicator Light
Connection Status
Left light off
No 1000Base-T connection.
Left light green
1000Base-T connection.
Right light off
No 10/100 Base-T connection and no network traffic with 1000 Base-T connection.
Right light on
10/100 Base-T connection and blinks with network traffic.
Right light blinking
Network traffic.
Polycom, Inc.
38
Networks
The LAN connector on the RealPresence Group 550 system has two lights to indicate connection status
and traffic.
Indicator Light
Connection Status
Left light off, right light
off
No 10/100/1000 Base-T connection.
Right light off, left light
green
10/100/1000 Base-T connection without activity.
Right light blinking
yellow, left light green
10/100/1000 Base-T connection and blinks with network
traffic.
Configure LAN Properties
You can configure LAN properties for the RealPresence Group systems and for Polycom Touch Control
Devices. Refer to the following section and Configure the Polycom Touch Control LAN Properties.
To configure RealPresence Group System LAN properties:
» Do one of the following:
 In the local interface, go to Settings > Administration > LAN Properties.
 In the web interface, go to Admin Settings > Network > LAN Properties.
Configure IP Address (IPv4) Settings
Configure the following IP Address (IPv4) settings on the LAN Properties screen.
Setting
Description
IP Address
Specifies how the system obtains an IP address.
• Obtain IP address automatically—Select if the system gets an IP address from
SLAAC (IPv6 only) or a DHCP server on the LAN.
• Enter IP address manually—Select if the IP address will not be assigned
automatically.
Your IP Address is
If the system obtains its IP address automatically, this area displays the IP address
currently assigned to the system.
If you selected Enter IP address manually, enter the IP address here.
Subnet Mask
Displays the subnet mask currently assigned to the system.
If the system does not automatically obtain a subnet mask, enter one here.
Default Gateway
Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP address, enter one here.
Configure IP Address (IPv6) Settings
Configure the following IP Address (IPv6) settings on the LAN Properties screen.
Polycom, Inc.
39
Networks
Setting
Description
Enable IPv6
Enables the IPv6 network stack and makes the IPv6 settings available.
Enable SLAAC
Specifies whether to use stateless address autoconfiguration (SLAAC) instead of DHCP
to automatically obtain an IP address.
Using DHCP to get the IP address means that you need a DHCP server to get the
address from the network, but with SLAAC, existing routers help the system get the IP
address from the network.
Link-Local
Displays the IPv6 address used for local communication within a subnet.
This setting is configurable only when Enter IP Address Manually is selected.
Site-Local
Displays the IPv6 address used for communication within the site or organization.
This setting is configurable only when Enter IP Address Manually is selected.
Global Address
Displays the IPv6 internet address.
This setting is configurable only when Enter IP Address Manually is selected.
Default Gateway
Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP address, enter one here.
This setting is configurable only when Enter IP Address Manually is selected.
Configure DNS Servers Settings
Configure the following DNS Servers settings on the LAN Properties screen.
Setting
Description
DNS Servers
(in the local interface:
DNS)
Displays the DNS servers currently assigned to the system.
When the IPv4 or IPv6 address is obtained automatically, the DNS Server addresses are
also obtained automatically. In the web interface, you can specify IPv4 DNS server
addresses only when the IPv4 or IPv6 address is entered manually. In the local interface,
the four DNS server address fields are always editable.
Server 1 Address
Server 2 Address
Server 3 Address
Server 4 Address
(read-only in the local
interface)
In the web interface, if the system does not automatically obtain a DNS server address,
you can enter one here. Up to four DNS server addresses are allowed. If all four address
fields show addresses, you cannot add another.
Configure LAN Options Settings
Configure the following LAN Options settings on the LAN Properties screen. In the web interface, these
settings are displayed within LAN Options, but in the local interface they are arranged differently.
Polycom, Inc.
40
Networks
Setting
Description
Host Name
(web interface only)
Indicates the system’s DNS name. On IPv4 networks the system will send the host name
to the DHCP server in order to enable it to register the hostname with the local DNS
server and/or look up the domain where the endpoint is registered (if supported). This
function is not supported on IPv6, so you can leave this field unconfigured if you’re using
an IPv6 network. However, configuring the field to contain the registered host name is
recommended.
Domain Name
(web interface only)
Displays the domain name currently assigned to the system.
If the system does not automatically obtain a domain name, enter one here.
Autonegotiation
(under General
Settings in local
interface)
Specifies whether the system should automatically negotiate the LAN speed and duplex
mode per IEEE 802.3 autonegotiation procedures. If this setting is enabled, the LAN
Speed and Duplex Mode settings become read only.
Polycom recommends that you use autonegotiation to avoid network issues.
LAN Speed
(under General
Settings in local
interface)
Specifies whether to use 10 Mbps, 100 Mbps, or 1000 Mbps for the LAN speed. Note
that the speed you choose must be supported by the switch.
Duplex Mode
(under General
Settings in local
interface)
Specifies the duplex mode to use. Note that the Duplex mode you choose must be
supported by the switch.
Ignore Redirect
Messages
(web interface only)
Enables the RealPresence Group system to ignore ICMP redirect messages.
You should enable this setting under most circumstances.
ICMP Transmission
Rate Limit (millisec)
(web interface only)
Specifies the minimum number of milliseconds between transmitted packets. Enter a
number between 0 and 60000. The default value of 1000 signifies that the system sends
1 packet per second. If you enter 0, the transmission rate limit is disabled.
This setting applies only to “error” ICMP packets. This setting has no effect on
“informational” ICMP packets, such as echo requests and replies.
Generate Destination
Unreachable
Messages
(web interface only)
Generates an ICMP Destination Unreachable message if a packet cannot be
delivered to its destination for reasons other than network congestion.
Respond to
Broadcast and
Multicast Echo
Requests
(web interface only)
Sends an ICMP Echo Reply message in response to a broadcast or multicast Echo
Request, which is not specifically addressed to the RealPresence Group system.
IPv6 DAD Transmit
Count
(web interface only)
Specifies the number of Duplicate Address Detection (DAD) messages to transmit before
acquiring an IPv6 address. The RealPresence Group system sends DAD messages to
determine whether the address it is requesting is already in use.
Select whether to transmit 0, 1, 2, or 3 DAD requests for an IPv6 address.
Polycom, Inc.
41
Networks
Setting
Description
Enable PC LAN Port
This setting appears only for RealPresence Group 700 systems.
Specifies whether the PC LAN port is enabled on the back of the system. Disable this
setting for increased security.
Enable LLDP
(under General
Settings in local
interface)
Specifies whether Link Layer Discovery Protocol (LLDP) is enabled.
Enable EAP/802.1X
(under EAP 802.1X in
local interface)
Specifies whether EAP/802.1X network access is enabled. RealPresence Group systems
support the following authentication protocols:
• EAP-MD5
• EAP-PEAPv0 (MSCHAPv2)
• EAP-TTLS
• EAP-TLS
EAP/802.1X Identity
(under EAP 802.1X in
local interface)
Specifies the system’s identity used for 802.1X authentication. This setting is available
only when EAP/802.1X is enabled. The field cannot be blank.
EAP/802.1X
Password
(under EAP 802.1X in
local interface)
Specifies the system’s password used for 802.1X authentication. This setting is required
when EAP-MD5, EAP-PEAPv0 or EAP-TTLS is used.
Enable 802.1p/Q
(under 802.1p/Q in
local interface)
Specifies whether VLAN and link layer priorities are enabled.
VLAN ID
Specifies the identification of the Virtual LAN.This setting is available only when 802.1p/Q
is enabled. The value can be any number from 1 to 4094.
Video Priority
Sets the link layer priority of video traffic on the LAN. Video traffic is any RTP traffic
consisting of video data and any associated RTCP traffic. This setting is available only
when 802.1p/Q is enabled. The value can be any number from 0 to 7, although 6 and 7
are not recommended.
Audio Priority
Sets the priority of audio traffic on the LAN. Audio traffic is any RTP traffic consisting of
audio data and any associated RTCP traffic. This setting is available only when 802.1p/Q
is enabled. The value can be any number from 0 to 7, although 6 and 7 are not
recommended.
Control Priority
Sets the priority of control traffic on the LAN. Control traffic is any traffic consisting of
control information associated with a call:
• H.323—H.225.0 Call Signaling, H.225.0 RAS, H.245, Far End Camera Control (FECC,
which, for RealPresence Group systems, is the Allow Other Participants in a Call to
Control Your Camera setting under Admin Settings > Audio/Video > Video Inputs
> General Camera Settings)
• SIP—SIP Signaling, FECC, Binary Floor Control Protocol (BFCP)
This setting is available only when 802.1p/Q is enabled. The value can be any number
from 0 to 7, although 6 and 7 are not recommended.
Polycom, Inc.
42
Networks
Configure the Polycom Touch Control LAN Properties
Before you can use the Touch Control with the RealPresence Group system, you must configure the LAN
settings.
To configure Polycom Touch Control LAN settings:
1 From the Home screen, touch
Administration.
2 Touch the LAN Properties tab.
3 Configure the following IP Address (IPv4) settings.
Setting
Description
Set IP Address
Specifies how the Touch Control obtains an IP address.
• Obtain IP address automatically—Select if the Touch Control gets an IP address
from the DHCP server on the LAN.
• Enter IP address manually—Select if the IP address is not automatically assigned.
IP Address
Displays the IP address currently assigned to the Touch Control, if the Touch Control
obtains its IP address automatically.
If you selected Enter IP address manually, enter the IP address here.
Subnet Mask
Displays the subnet mask currently assigned to the Touch Control.
If you selected Enter IP address manually, enter the subnet mask here.
Default Gateway
Displays the gateway currently assigned to the Touch Control.
If you selected Enter IP address manually, enter the gateway IP address here.
4 Configure the following DNS settings.
Setting
Description
Domain Name
Displays the domain name currently assigned to the Touch Control.
If the Touch Control does not automatically obtain a domain name, enter one here.
DNS Servers
Displays the DNS servers currently assigned to the Touch Control.
If the Touch Control does not automatically obtain a DNS server address, enter up to two
DNS servers here.
You can specify IPv4 DNS server addresses only when the IPv4 address is entered
manually. When the IPv4 address is obtained automatically, the DNS Server addresses
are also obtained automatically.
5 Optionally, view the general settings.
Setting
Description
Duplex Mode
Displays the duplex mode.
LAN Speed
Displays the LAN speed.
Polycom, Inc.
43
Networks
Configure IP Settings
You can configure IP network settings only through the web interface by going to Admin Settings >
Network > IP Network.
Network Quality Settings
Use this group of settings to specify how your RealPresence Group system responds to quality issues.
Setting
Description
Automatically Adjust
People/Content Bandwidth
Specifies whether the system should automatically adjust the bandwidth
necessary for the People stream or Content stream depending on the relative
complexity of the people video, content video, or both.
Quality Preference
Specifies which stream has precedence when attempting to compensate for
network loss:
• Both People and Content streams
• People streams
• Content streams
The stream defined to have precedence experiences less quality degradation
during network loss compensation than the stream not having precedence.
Choosing Both People and Content streams means that both streams
experience roughly equal degradation.
This setting is not available when the Automatically Adjust People/Content
Bandwidth setting is enabled.
H.323 Settings
If your network uses a gatekeeper, the system can automatically register its H.323 name and extension.
This allows others to call the system by entering the H.323 name or extension instead of the IP address.
Setting
Description
Enable IP H.323
Allows the H.323 settings to be displayed and configured.
H.323 Name
Specifies the name that gatekeepers and gateways use to identify this system.
You can make point-to-point calls using H.323 names if both systems are
registered to a gatekeeper.
The H.323 Name is the same as the System Name, unless you change it. Your
organization’s dial plan might define the names you can use.
H.323 Extension (E.164)
Lets users place point-to-point calls using the extension if both systems are
registered with a gatekeeper, and specifies the extension that gatekeepers and
gateways use to identify this system.
Your organization’s dial plan might define the extensions you can use.
Configure the System to Use a Gatekeeper
A gatekeeper manages functions such as bandwidth control and admission control. The gatekeeper also
handles address translation, which allows users to make calls using static aliases instead of IP addresses
that can change each day.
Polycom, Inc.
44
Networks
To configure the system to use a gatekeeper:
1 In the web interface, go to Admin Settings > Network > IP Network > H.323 Settings.
2 Configure the following settings.
Setting
Description
Use Gatekeeper
Select this setting to use a gatekeeper. Gateways and gatekeepers are required for
calls between IP and ISDN.
• Off—Calls do not use a gatekeeper.
• Auto—System attempts to automatically find an available gatekeeper.
• Specify—Calls use the specified gatekeeper. This option must be selected to
enable H.235 Annex D Authentication.
When you select a setting other than Off, the Registration Status is displayed
below the Enable IP H.323 setting.
Require Authentication
Enables support for H.235 Annex D Authentication.
When H.235 Annex D Authentication is enabled, the H.323 gatekeeper ensures
that only trusted H.323 endpoints are allowed to access the gatekeeper.
This setting is available when Use Gatekeeper is set to Specify.
User Name
When authentication is required, specifies the user name for authentication with
H.235 Annex D.
Enter Password
When authentication is required, specifies the password for authentication with
H.235 Annex D.
Current Gatekeeper IP
Address
If you chose Off for the Use Gatekeeper field, the Current Gatekeeper IP
Address field is not displayed.
Displays the IP address that the gatekeeper is currently using.
Primary Gatekeeper IP
Address
•
If you chose Off for the Use Gatekeeper field, the Primary Gatekeeper IP
Address field is not displayed.
• If you chose to use an automatically selected gatekeeper, this area displays the
gatekeeper’s IP address.
• If you chose to specify a gatekeeper, enter the gatekeeper’s IP address or name
(for example, 10.11.12.13 or gatekeeper.companyname.usa.com).
The primary gatekeeper IP address contains the IPv4 address the system registers
with. As part of the gatekeeper registration process, the gatekeeper might return
alternate gatekeepers. If communication with the primary gatekeeper is lost, the
RealPresence Group system registers with the alternate gatekeeper but continues
to poll the primary gatekeeper. If the system reestablishes communications with the
primary gatekeeper, the RealPresence Group system unregisters from the
alternate gatekeeper and reregisters with the primary gatekeeper.
Note: No multipoint on Group 300 and 310 systems
Polycom RealPresence Group 300 and 310 systems cannot be enabled for multipoint calling.
SIP Settings
If your network supports the Session Initiation Protocol (SIP), you can use SIP to connect IP calls.
Polycom, Inc.
45
Networks
The SIP protocol has been widely adapted for voice over IP communications and basic video conferencing;
however, many of the video conferencing capabilities are not yet standardized. Many capabilities also
depend on the SIP server.
The following are examples of features that are not supported using SIP:
● Cascaded multipoint in SIP calls.
● Meeting passwords. If you set a meeting password, SIP endpoints will be unable to dial in to a
multipoint call.
For more information about SIP compatibility issues, refer to the Release Notes for Polycom RealPresence
Group Systems.
To specify SIP settings:
1 In the web interface, go to Admin Settings > Network > IP Network > SIP.
2 Configure these settings.
Setting
Description
Enable SIP
Allows the SIP settings to be displayed and configured.
Enable AS-SIP
Enables the RealPresence Group system to apply the settings configured for assured
services SIP.
SIP Server
Configuration
Specifies whether to automatically or manually set the SIP server’s IP address.
If you select Auto, the Transport Protocol, Registrar Server, and Proxy Server settings
cannot be edited. If you select Specify, those settings are editable.
Transport Protocol
Indicates the protocol the system uses for SIP signaling.
The SIP network infrastructure your RealPresence Group System operates within
determines which protocol is required.
Auto—Enables an automatic negotiation of protocols in the following order: TLS, TCP,
UDP. This is the recommended setting for most environments.
TCP—Provides reliable transport via TCP for SIP signaling.
UDP—Provides best-effort transport via UDP for SIP signaling.
TLS—Provides secure communication of the SIP signaling. TLS is available only when
the system is registered with a SIP server that supports TLS. When you choose this
setting, the system ignores TCP/UDP port 5060. Select TLS if you want to encrypt SVC
calls.
Polycom, Inc.
46
Networks
Setting
Description
BFCP Transport
Preference
Controls the negotiation behavior for content sharing using the Binary Floor Control
Protocol (BFCP). Establishes the relationship between the floor control server and its
clients, while the available settings determine how network traffic flows between the
server and clients.
TCP is typically known as the older, slightly slower, and more reliable method, but is not
supported under some circumstances, such as with session border controllers (SBCs).
Prefer UDP—Starts resource sharing using UDP, but fall back to TCP if needed. This is
the default value when SIP is enabled.
Prefer TCP—Starts resource sharing using TCP, but fall back to UDP if needed.
UDP Only—Shares resources only through UDP. If UDP is unavailable, content sharing
in a separate video stream is not available.
TCP Only—Shares resources only through TCP. If TCP is unavailable, content sharing
in a separate video stream is not available.
Sign-in Address
Specifies the SIP address or SIP name of the system, for example,
[email protected]. If you leave this field blank, the system’s IP
address is used for authentication.
User Name
Specifies the user name to use for authentication when registering with a SIP Registrar
Server, for example, marySmith. If the SIP proxy requires authentication, this field and
the password cannot be blank.
Password
Specifies the password associated with the User Name used to authenticate the system
to the Registrar Server. The password can be up to 47 characters in length.
Registrar Server
Specifies the IP address or DNS name of the SIP Registrar Server. The address can be
specified as either an IP address or a DNS fully qualified domain name (FQDN). If
registering a remote RealPresence Group System with an Lync Server Edge Server,
use the FQDN of the edge server.
By default for TCP, the SIP signaling is sent to port 5060 on the registrar server. By
default for TLS, the SIP signaling is sent to port 5061 on the registrar server.
Enter the address and port using the following format:
<IP_Address>:<Port>
<IP_Address> can be an IPv4 or IPv6 address, or a DNS FQDN such as
servername.company.com:6050.
Syntax Examples:
• To use the default port for the protocol you have selected:
10.11.12.13
• To specify a different TCP or UDP port:
10.11.12.13:5071
Proxy Server
Specifies the DNS FQDN or IP address of the SIP Proxy Server. If you leave this field
blank, the address of the Registrar Server is used. If you leave both the SIP Registrar
Server and Proxy Server fields blank, no Proxy Server is used.
By default for TCP, the SIP signaling is sent to port 5060 on the proxy server. By default
for TLS, the SIP signaling is sent to port 5061 on the proxy server.
The syntax used for this field is the same as for the Registrar Server field.
Registrar Server Type
Specifies the registrar server type. Select Microsoft or Unknown.
Polycom, Inc.
47
Networks
For more information about this and other Microsoft interoperability considerations, refer to the Polycom
Unified Communications Deployment Guide for Microsoft Environments.
Configure SIP Settings for Integration with Microsoft Servers
Integration with Microsoft Lync Server 2010 and 2013 allows Microsoft Lync and Polycom RealPresence
Group system users to place audio and video calls to each other.
Note: Presence server limit
Because Polycom RealPresence Group systems run in dynamic management mode, they cannot be
simultaneously registered with Lync Server and the presence service provided by the Polycom
Converged Management Service (CMA) or Polycom RealPresence Resource Manager system.
RealPresence Group systems can obtain presence services from only one source: Lync Server, or the
presence service provided by the CMA or RealPresence Resource Manager system.
Polycom supports the following features in Microsoft Lync Server 2010 and 2013:
● Interactive Connectivity Establishment (ICE)
● Centralized Conferencing Control Protocol (CCCP); this feature is available only with the optional
Lync Interoperability License key
● Federated presence
● The Microsoft real-time video (RTV) codec; this feature is available only with the optional Lync
Interoperability License key
For more information about this and other Microsoft interoperability considerations, refer to Polycom Unified
Communications Deployment Guide for Microsoft Environments.
If your organization deploys multiple Lync Server pools, a Polycom RealPresence Group system must be
registered to the same pool to which the system's user account is assigned.
Configure SIP Settings for Integration with the Telepresence Interoperability
Protocol (TIP)
When SIP is enabled on a RealPresence Group system that has the TIP option, the system can interoperate
with TIP endpoints. However, there are some limitations:
● Polycom RealPresence Group systems cannot host multipoint calls while in a SIP (TIP) call.
● SIP (TIP) calls must connect at a call speed of 1 Mbps or higher.
● Only TIP version 7 is supported.
● In a TIP call, only XGA content at 5 fps is supported.
For more information about Polycom support for the TIP protocol, refer to Polycom Unified Communications
Deployment Guide for Cisco Environments.
Note: TIP option key code
You cannot configure TIP without purchasing and installing a Telepresence Interoperability Protocol
(TIP) option key code.
RTV and Lync-Hosted Conference Support
To use RTV in a Lync-hosted conference, you must have the Lync Interoperability License key enabled on
your RealPresence Group system.
Polycom, Inc.
48
Networks
For more information about configuring your Lync Server video settings for RTV, refer to the Polycom Unified
Communications Deployment Guide for Microsoft Environments.
AS-SIP Settings
RealPresence Group systems support the Assured Services Session Initiation Protocol (AS-SIP), as
defined by the Unified Capabilities Requirements (UCR) technical standards for telecommunication
switching equipment developed by the DoD and Defense Information Systems Agency (DISA). AS-SIP is
the term used to describe the DoD version of SIP used as part of its initiative to build a reliable and secure
IP communications network. AS-SIP incorporates Multilevel Precedence and Preemption, Secure Signaling
and Media, Quality of Service (QoS), and IPv6 support.
Configure AS-SIP Settings
The AS-SIP settings define service codes, network domains, and precedence levels for MLPP.
To enable AS-SIP on your system:
1 In the web interface, go to Admin Settings > Network > IP Network > SIP.
2 Select the Enable AS-SIP setting.
To configure your AS-SIP settings:
1 In the web interface, go to Admin Settings > Network > IP Network > AS-SIP.
2 Configure these settings.
Setting
Description
Service Code
Defines one or more of the US Federal Communications Commission (FCC) N11
special services dialing codes or worldwide special dialing codes.
Outbound Precedence
Call Defaults
Defines the Default Domain (network domain) and the Default Precedence level
used when dialing a call.
MLPP Network Domains
Defines the MLPP network domains your network uses.
To add a service code:
1 To add a Service Code, click
.
2 In the text field of the new line that appears, enter the numbers.
3 Click another line in the list to create the service code.
To delete any service code, click
.
To define outbound precedence call defaults:
1 Select the Default Domain to use for outbound calls, that is, the default network domain.
RealPresence Group systems come preconfigured for use on the uc and dsn network domains, but
you can add others. You can choose any defined network domain as the default domain to use for
outbound calls. uc and dsn are the preconfigured network domains and uc is the default network
domain for this setting.
Polycom, Inc.
49
Networks
2 Select the Default Precedence to use for outbound calls.
This setting accepts one of the defined precedence levels from the configured default domain. The
setting defaults to ROUTINE, which is the lowest precedence level defined in the default network
domain uc.
Although uc and dsn are preconfigured on the system, you can edit their settings or create other network
domains.
To define MLPP network domains:
1 To edit a domain, click
.
2 If needed, edit the Network Domain Name or change the Allow Incoming Calls setting. Disabling
the Allow Incoming Calls setting causes the system to reject any calls from this network domain.
3 Select a Precedence Level.
You can define a total of 10 precedence levels.
4 Configure these settings.
Setting
Description
Precedence Level
The name associated with the precedence level.
You can click Add Precedence Level to create a level and you can click
level.
to remove a
Dial Digit
A single numeric field (0-9) that represents the dialing digit used to indicate the requested
call precedence.
The precedence dial string is indicated by a leading '9' followed by the Dial Digit, followed by
the 7- or 10-digit number.
Resource Priority
Header
Represents the value in the SIP Resource Priority Header used to signal the precedence
level. This field accepts a single UTF-8 character.
Audio DSCP
Indicates the DSCP value used for audio RTP/SRTP packets sent in calls using this
precedence level. The field accepts an integer value range from 0-63.
Video DSCP
Indicates the DSCP value used for video RTP/SRTP packets sent in calls using this
precedence level. The field accepts an integer value range from 0-63.
5 Click Save.
To add a network domain, click
and then configure the same settings defined above for the new network
domain. Click Save when you are finished.
Multilevel Precedence and Preemption (MLPP)
Multilevel Precedence and Preemption (MLPP) provides call prioritization over network resources and
far-end system access. Authorized users place precedence calls to elevate the priority of the call through
the AS-SIP network. Systems already in a call can be preempted by an incoming call with a higher priority.
In addition, precedence call signaling and media packets are marked with DSCP values associated with the
precedence level to ensure network QoS commensurate with the call precedence level.
RealPresence Group systems provide support for placing precedence calls through the use of precedence
prefix codes in the dial string. Calls can be placed at any of the precedence levels defined within the network
domain configured as the default domain for outbound calls. The default network domains uc and dsn
define five precedence levels: Routine, Priority, Immediate, Flash, or Flash Override. The system signals
Polycom, Inc.
50
Networks
the precedence level according to the standards in UCR 2008, Change 3, and provides appropriate
feedback to the user placing the call.
Incoming calls are announced with the appropriate precedence level, and the authorized user can select
one of the following ways to handle the call:
● Answer directly
● Join into conference
● Hang up current call and answer
Alternative Network Address Type (ANAT)
ANAT signaling is used for IPv4 and IPv6 support in AS-SIP and is only useful in AS-SIP environments.
When AS-SIP is enabled, and dual stack (IPV4 and IPV6) is enabled, ANAT signaling is enabled.
Notes: AS-SIP restrictions
Consider the following restrictions when you enable AS-SIP on a RealPresence Group system:
• Be sure to register the system only to AS-SIP-aware proxy/registrar servers, because AS-SIP
signaling can be incompatible with other types of proxy/registrar servers.
• If the Cisco Telepresence Interoperability Protocol (TIP) software option is installed, turn off TIP
signaling on the RealPresence Group endpoint by going to Admin Settings > Network > Dialing
Preferences > Dialing Options and disabling the TIP setting. TIP signaling is incompatible with
AS-SIP signaling.
Network Quality
Set the Network Quality options for the way your network handles IP packets during video calls.
To configure quality of service settings:
1 In the web interface, go to Admin Settings > Network > IP Network > Network Quality.
2 Configure these settings.
Setting
Description
Type of Service
Specifies your service type and lets you choose how to set the priority of IP packets
sent to the system for video, audio, FECC, and OA&M:
• IP Precedence—Represents the priority of IP packets sent to the system. The
value can be between 0 and 7.
• DiffServ—Represents a priority level between 0 and 63.
Note: If AS-SIP is enabled and you select DiffServ, the DSCP values for audio and
video defined for the negotiated call precedence level in the default network domain
that was configured for outbound calls override the Video and Audio settings
defined on this page of the web interface. If you have not enabled AS-SIP, the Video
and Audio values defined here are used.
Video
Specifies the IP Precedence or Diffserv value for video RTP traffic and associated
RTCP traffic.
Audio
Specifies the IP Precedence or Diffserv value for audio RTP traffic and associated
RTCP traffic.
Polycom, Inc.
51
Networks
Setting
Description
Control
Specifies the IP Precedence or Diffserv value for control traffic on any of the
following channels:
• H.323—H.225.0 Call Signaling, H.225.0 RAS, H.245, Far End Camera Control
(FECC, which, for RealPresence Group systems, is the Allow Other Participants
in a Call to Control Your Camera setting under Admin Settings > Audio/Video
> Video Inputs > General Camera Settings)
• SIP—SIP Signaling, FECC, Binary Floor Control Protocol (BFCP)
OA&M
Specifies the IP Precedence or Diffserv value for traffic not related to video, audio, or
FECC.
Maximum Transmission
Unit Size
Specifies whether to use the default Maximum Transmission Unit (MTU) size for IP
calls or select a maximize size.
Maximum Transmission
Unit Size Bytes
Specifies the MTU size, in bytes, used in IP calls. If the video becomes blocky or
network errors occur, packets might be too large; decrease the MTU. If the network
is burdened with unnecessary overhead, packets might be too small; increase the
MTU.
Enable Lost Packet
Recovery
Allows the system to use LPR (Lost Packet Recovery) if packet loss occurs.
Enable RSVP
Allows the system to use Resource Reservation Setup Protocol (RSVP) to request
that routers reserve bandwidth along an IP connection path. Both the near site and
far site must support RSVP in order for reservation requests to be made to routers
on the connection path.
Dynamic Bandwidth
Specifies whether to let the system automatically find the optimum call rate for a call.
MRC Bandwidth
Allocation
Adjusts media bit stream bandwidth, reducing packet loss. Specifically designed for
SVC-based calls. For more information on SVC, see Set SVC Call Preferences.
Maximum Transmit
Bandwidth
Specifies the maximum transmit call rate between 64 kbps and the system’s
maximum line rate. This setting can be useful when the system is connected to the
network using an access technology that provides different transmit and receive
bandwidth (such as cable or DSL access).
Maximum Receive
Bandwidth
Specifies the maximum receive call rate between 64 kbps and the system’s
maximum line rate. This setting can be useful when the system is connected to the
network using an access technology that provides different transmit and receive
bandwidth (such as cable or DSL access).
Note: When a RealPresence Group 500 or RealPresence Group 700 system is hosting a multipoint call, the total
call rate for all sites in the call is 6 Mbps.
Lost Packet Recovery and Dynamic Bandwidth
You can handle video quality issues by selecting the Enable Lost Packet Recovery (LPR) setting, the
Dynamic Bandwidth setting, or both settings.
If both settings are enabled, Dynamic Bandwidth adjusts the video rate to reduce packet loss to 3% or less.
When packet loss drops to 3% or less, LPR cleans up the video image on your monitor. The additional
processing power required might cause the video rate to drop while the system is using LPR. If this
happens, the Call Statistics screen shows the Video Rate Used as lower than the Video Rate. If Packet Loss
Polycom, Inc.
52
Networks
is 0 for at least 10 minutes, LPR stops operating and the Video Rate Used increases to match the Video
Rate.
If only LPR is enabled and the system detects packet loss, LPR attempts to clean the image but the video
rate is not adjusted. If only Dynamic Bandwidth is enabled and the system detects packet loss of 3% or
more, the video rate is adjusted but LPR does not clean the image.
You can view % Packet Loss, Video Rate, and Video Rate Used on the Call Statistics screen.
Configure the System for Use with a Firewall or NAT
A firewall protects an organization’s IP network by controlling data traffic from outside the network. Unless
the firewall is designed to work with H.323 video conferencing equipment, you must configure the system
and the firewall to allow video conferencing traffic to pass in and out of the network.
Network Address Translation (NAT) network environments use private internal IP addresses for devices
within the network, while using one external IP address to allow devices on the LAN to communicate with
other devices outside the LAN. If your system is connected to a LAN that uses a NAT, you will need to enter
the NAT Public (WAN) Address so that your system can communicate outside the LAN.
To set up the system to work with a firewall or NAT:
1 In the web interface, go to Admin Settings > Network > IP Network > Firewall.
2 Configure these settings.
Setting
Description
Fixed Ports
Lets you specify whether to define the TCP and UDP ports.
• If the firewall is not H.323 compatible, enable this setting. The RealPresence Group
system assigns a range of ports starting with the TCP and UDP ports you specify. The
system defaults to a range beginning with port 3230 for both TCP and UDP.
Note: You must open the corresponding ports in the firewall. For H.323, you must
also open the firewall’s TCP port 1720; for SIP you must open either UDP port 5060,
TCP 5060, or TCP 5061 depending on whether you are using UDP, TCP, or TLS as
the SIP transport protocol.
• If the firewall is H.323 compatible or the system is not behind a firewall, disable this
setting.
For IP H.323 you need 2 TCP and 8 UDP ports per connection. For SIP you need TCP
port 5060 and 8 UDP ports per connection.
Note: Because RealPresence Group systems support ICE, the range of fixed UDP
ports is 112. The RealPresence Group system cycles through the available ports from
call to call. After the system restarts, the first call begins with the first port number, either
49152 or 3230. Subsequent calls start with the last port used, for example, the first call
uses ports 3230 to 3236, the second call uses ports 3236 to 3242, the third call uses
ports 3242 through 3248, and so on.
TCP Ports
UDP Ports
Specifies the beginning value for the range of TCP and UDP ports used by the system.
The system automatically sets the range of ports based on the beginning value you set.
Note: You must also open the firewall’s TCP port 1720 to allow H.323 traffic.
Enable H.460 Firewall
Traversal
Allows the system to use H.460-based firewall traversal for IP calls. For more
information, refer to H.460 NAT Firewall Traversal.
Polycom, Inc.
53
Networks
Setting
Description
NAT
Specifies whether the system should determine the NAT Public WAN Address
automatically.
• If the system is not behind a NAT or is connected to the IP network through a Virtual
Private Network (VPN), select Off.
• If the system is behind a NAT that allows HTTP traffic, select Auto.
• If the system is behind a NAT that does not allow HTTP traffic, select Manual.
NAT Public (WAN)
Address
Displays the address that callers from outside the LAN use to call your system. If you
chose to configure the NAT manually, enter the NAT Public Address here.
This field is editable only when NAT Configuration is set to Manual.
NAT is H.323
Compatible
Specifies that the system is behind a NAT that is capable of translating H.323 traffic.
This field is visible only when NAT Configuration is set to Auto or Manual.
Address Displayed in
Global Directory
Lets you choose whether to display this system’s public or private address in the global
directory.
This field is visible only when NAT Configuration is set to Auto or Manual.
Enable SIP Keep-Alive
Messages
Specifies whether to regularly transmit keep-alive messages on the SIP signaling
channel and on all RTP sessions that are part of SIP calls. Keep-alive messages keep
connections open through NAT/Firewall devices that are often used at the edges of both
home and enterprise networks.
When a RealPresence Group system is deployed or registered in an Avaya SIP
environment, Polycom recommends that you disable this setting to allow calls to
connect fully.
In environments set up behind a firewall, firewall administrators can choose to limit access to TCP
connections only. Although TCP is an accurate and reliable method of data delivery that incorporates
error-checking, it is not a fast method. For this reason, real-time media streams often use UDP, which offers
speed but not necessarily accuracy. Within an environment behind a firewall, where firewall administrator
has restricted media access to TCP ports, calls can be completed using a TCP connection instead of UDP.
Caution: Firewalls are recommended
Systems deployed outside a firewall are potentially vulnerable to unauthorized access. Visit the
Polycom Security section of the Knowledge Base at support.polycom.com for timely security
information. You can also register to receive periodic email updates and advisories.
H.460 NAT Firewall Traversal
You can configure RealPresence Group systems to use standards-based H.460.18 and H.460.19 firewall
traversal, which allows video systems to more easily establish IP connections across firewalls.
The following illustration shows how a service provider might provide H.460 firewall traversal between two
enterprise locations. In this example the Polycom Video Border Proxy™ (VBP®) firewall traversal device is
on the edge of the service provider network and facilitates IP calls between RealPresence Group systems
behind different firewalls.
Polycom, Inc.
54
Networks
Example of Service Provider Firewall Traversal
Service Provider
Enterprise Location A
Ref.
Number
Description
1
Polycom Video Border Proxy
2
Gatekeeper
3
IP network
4
Firewall
5
RealPresence Group system
6
Firewall
7
RealPresence Group system
Enterprise Location B
To use this traversal, configure the RealPresence Group systems and firewalls as follows:
1 Enable firewall traversal on the RealPresence Group system.
a In the web interface, go to Admin Settings > Network > IP Network > Firewall.
b Select Enable H.460 Firewall Traversal.
2 Register the RealPresence Group system to an external Polycom VBP device that supports the
H.460.18 and H.460.19 standards.
3 Make sure that firewalls being traversed allow RealPresence Group systems behind them to open
outbound TCP and UDP connections.
 Firewalls with a stricter rule set should allow RealPresence Group systems to open at least the
following outbound TCP and UDP ports: 1720 (TCP), 14085-15084 (TCP) and 1719 (UDP),
16386-25386 (UDP).
 Firewalls should permit inbound traffic to TCP and UDP ports that have been opened earlier in the
outbound direction.
Polycom, Inc.
55
Networks
Basic Firewall/NAT Traversal Connectivity
Basic Firewall/NAT Traversal Connectivity allows RealPresence Group systems to connect to the
SIP-based RealPresence solutions using the Acme Packet Net-Net family of Session Border Controllers
(SBC). A RealPresence Group system connects to the Acme Packet Net-Net SBC as a remote enterprise
endpoint. The remote enterprise endpoint is registered to the enterprise’s SIP infrastructure and connects
to an internal enterprise endpoint through the enterprise firewall.
For details about the use and configuration of the Acme Packet Net-Net SBC used in conjunction with this
feature, refer to Deploying Polycom Unified Communications in an Acme Packet Net-Net Enterprise
Session Director Environment.
RealPresence Group systems now also provide full mutual TLS support for SIP and XMPP Presence
connections. Full mutual TLS support gives administrators the ability to identify and authenticate devices
attempting to join conferences from outside the enterprise network.
Set SVC Call Preferences
Scalable Video Coding (SVC) conferencing provides several benefits, including fewer video resource
requirements, better error resiliency, lower latency, and more flexibility with display layouts.
You can make and receive SVC multipoint calls when the Polycom RealPresence Group system is
connected to an SVC-compatible bridge through the RealPresence Distributed Media Application (DMA). In
an SVC-based conference, each SVC-enabled endpoint transmits multiple bit streams, called simulcasting,
to the Polycom RealPresence Collaboration Server (RMX). The RealPresence Collaboration Server sends
or relays selected video streams to the endpoints without sending the entire video layout. The streams are
assembled into a layout by the SVC-enabled endpoints according to each of their different display
capabilities and layout configurations.
To make SVC point-to-point calls, the RealPresence Group system must be registered to a Lync 2013
server. In a Microsoft Lync 2013-hosted multipoint or point-to-point call, you can view multiple far-end sites
in layouts. RealPresence Group 500 and 700 systems display up to five far-end sites on Lync 2013 hosted
(SVC), multipoint calls.
For more information on the features, limitations, and layouts of SVC-based conferencing, refer to the
Polycom RealPresence SVC-Based Conferencing Solutions Deployment Guide available at
support.polycom.com.
For information on enabling encryption for SVC calls, refer to Configure Encryption Settings for SVC Calls.
Enable SVC Dialing Options
Dialing preferences help you manage the network bandwidth used for calls and establish an SVC call
configuration. You can specify the default and optional call settings for outgoing calls. You can also limit the
call speeds of incoming calls.
To configure dialing options:
1 In the web interface, go to Admin Settings > Network > Dialing Preference > Dialing Options.
2 Configure these settings.
Polycom, Inc.
56
Networks
Setting
Description
Scalable Video Coding
Preference (H.264)
Specifies whether to use scalable or advanced video coding:
• SVC then AVC—Use SVC when possible; otherwise, use AVC.
• AVC Only—This option disables SVC.
This setting is not applicable to Lync-hosted calls, since SVC is negotiated
automatically by Lync 2013.
Enable H.239
Specifies standards-based People+Content data collaboration. Enable this option if
you know that H.239 is supported by the far -end sites you call.
Video Dialing Order
Specifies how the system places video calls to directory entries that have more than
one type of number.
• IP H.323
• SIP
This setting also specifies how the system places video calls from the Place a Call
screen when the call type selection is either unavailable or set to Auto. If a call
attempt does not connect, the system tries to place the call using the next call type in
the list.
Enable Automatic Answering of SVC Point-to-Point Calls
A RealPresence Group system registered to a Lync 2013 server and connected to an SVC-compatible
bridge can automatically answer incoming SVC calls. To enable this feature, complete two tasks on a
RealPresence Group system:
● Enable Auto Answer Point-to-Point Video
● Enable Scalable Video Coding Preference (H.264)
To enable Auto Answer Point-to-Point Video:
1 In the web interface, go to Admin Settings > General Settings > System Settings > Call
Settings.
2 From the Auto Answer Point-to-Point Video list, select Yes.
To enable Scalable Video Coding Preference (H.264):
1 In the web interface, go to Admin Settings > Network > Dialing Preference > Dialing Options.
2 From the Scalable Video Coding Preference (H.264) list, select SVC then AVC.
Set Preferred Speeds
To configure call speeds:
1 In the web interface, go to Admin Settings > Network > Dialing Preference > Preferred Speeds.
2 Configure these settings.
Polycom, Inc.
57
Networks
Setting
Description
Preferred Speed for
Placed Calls
IP Calls
SIP (TIP) Calls
Determines the speeds to use for IP or SIP (TIP) calls from this system when either
of the following statements is true:
• The call speed is set to Auto on the Place a Call screen
• The call is placed from the directory
If the far-site system does not support the selected speed, the system automatically
negotiates a lower speed.
Users cannot specify a call speed when placing calls from the Polycom Touch
Control.
The SIP (TIP) Calls setting is available only when the TIP setting is enabled.
Maximum Speed for
Received Calls
IP Calls
SIP (TIP) Calls
Allows you to restrict the bandwidth used when receiving IP or SIP (TIP) calls.
If the far site attempts to call the system at a higher speed than selected here, the
call is renegotiated at the speed specified in this field.
The SIP (TIP) Calls setting is available only when the TIP setting is enabled.
Note: Point-to-point call bandwidth limits
For point-to-point calls, the Polycom RealPresence Group 300 and 310 systems use a maximum of 3
Mbps of bandwidth, and the RealPresence Group 500 systems use a maximum of 6 Mbps.
Note: Point-to-point call bandwidth limits
For point-to-point calls, the Polycom RealPresence Group 300 and 310 systems use a maximum of 3
Mbps of bandwidth, and the RealPresence Group 500 and RealPresence Group 550 systems use a
maximum of 6 Mbps.
Find Your System IP Address
You can find your RealPresence Group system’s IP address in the local or the web interfaces:
● In the local interface, navigate to Settings > Administration > LAN Properties: IP Address.
● In the local interface, if the administrator has configured the system to show the IP address, view the
top of the menu that is displayed when you press
with the remote control and on the Home
screen.
● In the web interface, view it at the top of the page next to the language drop-down list and in Admin
Settings > Network > LAN Properties: Your IP Address is.
Polycom, Inc.
58
Monitors and Cameras
Make sure that the RealPresence Group system is powered off before you connect devices. These topics
detail how to set up monitors and cameras with your system:
● Configure Monitor Settings
● Polycom Cameras
● Configure Video Input Settings
● Enable Camera Presets
● Experience High-Definition Video Conferencing
For more information about connecting monitors to RealPresence Group systems, refer to System Back
Panel Views.
Configure Monitor Settings
The RealPresence Group system constantly detects any monitors connected to it. You choose which
monitors with the Enable setting. You can also add a Monitor Profile to manage a group of monitor settings.
To configure monitors:
1 In the web interface, go to Admin Settings > Audio/Video > Monitors.
2 Configure these settings on the Monitors page. The settings for Monitor 1, Monitor 2, and Monitor 3
are the same, although the available options can be different.
Setting
Description
Enable
Specifies the monitor setting:
• Auto–This is the default setting. Specifies that the Video Format and Resolution
settings are automatically detected and disables those settings.
• Manual–Enables you to select the Video Format and Resolution settings.
Resolution settings are filtered based on the Video Format you selected.
• Off–Disable this monitor.
Monitor Profile
Specifies which profile to use for this monitor. The choices depend on how many
monitors the system uses and which monitor you are configuring.
Polycom, Inc.
59
Monitors and Cameras
Setting
Description
Video Format
Specifies the monitor’s format. Depending on which RealPresence Group System and
monitor you configure, the choices are:
• HDMI
• DVI
• Component
• VGA
Note: This setting is unavailable when you select Auto for the Enable setting.
Resolution
Specifies the resolution for the monitor.
Note: This setting is unavailable when you select Auto for the Enable setting.
Monitor Profiles
Monitor Profiles set the preferences for what is shown on available monitors. Configuring this setting allows
you to customize the monitor configuration to match your environment or your desired meeting experience.
The Monitor Profiles settings are just preferences. What you see can vary depending on layout views,
whether content is being shown, the number of active monitors, and so on.
The following table describes the configuration of each monitor profile.
Setting
Description
Decide for Me
Default setting that sets monitors to show content and the current speakers
based on a variety of factors. When you select Decide for Me, the settings
for Monitor 2 and Monitor 3 are unavailable. If you later choose a different
setting, the original values persist.
Note: When Decide for Me is enabled, content is normally sent to Monitor 2.
Me Only (Monitor 2 or Monitor 3)
Sets the monitor to always show you.
Speaker Only
Sets the monitor to show current people speaking at the far-end on
Monitor 1. Monitor 2 shows only one person.
Content Only (Monitor 2 or
Monitor 3)
Sets the monitor to show available content. Otherwise, the monitor shows
the room background.
This option is not available to Monitor 3 of RealPresence Group 550
systems.
Speaker and Content
Sets the monitor to show available content. Otherwise, the monitor shows
the person speaking at the far-end. You can browse layouts with this setting.
Polycom, Inc.
60
Monitors and Cameras
Setting
Description
Recording Device with Speaker
and Content (Monitor 3 only)
Sets the monitor to show available content or the person speaking to support
recording with a DVR. The showing of content takes priority over the
showing of a person speaking.
This setting is available only with RealPresence Group 700 systems.
Select this setting to record near, far, and content audio. If there is content,
the video is recorded in full screen. If there is no content, the speaker is
recorded in full screen.
Recording Device with Speaker
Only (Monitor 3 only)
Sets the monitor to show the current person speaking, regardless of the
speaker’s location, to support recording with a DVR.
This setting is available only with RealPresence Group 700 systems.
Select this setting to record near, far, and content audio. Only the speaker is
recorded in full screen.
The Automatic Self View setting can also affect what displays on the monitors. For more information, refer
to Configure Menu Settings.
Record Calls
To record calls, you can either remotely log in to the RealPresence Capture Server portal or use the
RealPresence Group 700 system on Monitor 3.
RealPresence Capture Server Portal
If you have user-level access to a RealPresence Capture Server portal, you can log in to the portal to dial
a RealPresence Group system, and then record a call. This method is ideal for a RealPresence Group
system administrator who controls the system remotely. For information about using this method, refer to
the Polycom RealPresence Capture Server, Appliance Edition at support.com.
RealPresence Group 700 System
You can use a RealPresence Group 700 system to record the audio and video of a call on Monitor 3.
To enable and disable recording:
1 In the web interface, select Admin Settings > Audio/Video > Monitors.
2 Select one of the following settings for Monitor 3:
 Recording Device with Speaker and Content. Select this setting to record what the speaker
says, along with any content audio.
 Recording Device with Speaker Only. Select this setting to record only what the speaker says.
To record audio only using a RealPresence Group 550 system, use the telnet API command
recordingaudio. For more information, refer to Polycom RealPresence Group Series Integrator
Reference Guide at support.polycom.com.
Polycom, Inc.
61
Monitors and Cameras
Maximize HDTV Video Display
When you use a television as your monitor, some HDTV settings might interfere with the video display or
quality of your calls. To avoid this potential problem, you should disable all audio enhancements in the HDTV
menu, such as “SurroundSound.”
In addition, many HDTVs have a low-latency mode called Game Mode, which could lower video and audio
latency. Although Game Mode is typically turned off by default, you could have a better experience if you
turn it on.
Finally, before attaching your Polycom RealPresence Group system to a TV monitor, ensure the monitor is
configured to display all available pixels. This setting, also known as “fit to screen” or “dot by dot,” enables
the entire HD image to be displayed. The specific name of the monitor setting varies by manufacturer.
Use Sleep Settings to Prevent Monitor Burn-In
Monitors and Polycom RealPresence Group systems provide display settings to help prevent image burn-in.
Plasma televisions can be particularly vulnerable to this problem. Refer to your monitor’s documentation or
manufacturer for specific recommendations and instructions. The following guidelines help prevent image
burn-in:
● Ensure that static images are not displayed for long periods.
● Set the Time before system goes to sleep to 60 minutes or less.
● To keep the screen clear of static images during a call, disable the following settings:
 Display Icons in a Call (Admin Settings > General Settings > System Settings > Call
Settings)
 Show Time in Call (Admin Settings > General Settings > Date and Time > Time in Call)
● Be aware that meetings that last more than an hour without much movement can have the same
effect as a static image.
● Consider decreasing the monitor’s sharpness, brightness, and contrast settings if they are set to their
maximum values.
Set Up CEC Monitor Controls
Consumer Electronics Control (CEC) monitor controls enable the following features on RealPresence
Group systems connected to any HDMI monitors that support the CEC protocol:
● One Touch Play–Use the RealPresence Group Series remote to wake up the monitors. All
connected CEC-capable monitors are powered on, and their displays are switched to RealPresence
Group Series input.
● System Standby–When the RealPresence Group system enters sleep mode, all connected
CEC-capable monitors are switched to standby mode for power saving. When waking up, the
monitors are powered up before they display RealPresence Group system video.
Note the following points about using CEC controls with RealPresence Group systems:
● If you connect to the monitor with an HDMI splitter, ensure the HDMI splitter is CEC-capable. Due to
HDMI splitter limitations, monitors behind a 1xM (one-input multiple-output) HDMI splitter will power
up but might not switch to the correct input when waking up.
● The RealPresence Group system does not respond to CEC commands issued by a television remote
control.
Polycom, Inc.
62
Monitors and Cameras
● If a CEC-capable monitor is connected to a RealPresence Group system and another endpoint, the
monitor displays the active endpoint when the RealPresence Group system is in standby mode.
Note: CEC support on RealPresence Group 550 systems
CEC is supported only on hardware version 2 or later of RealPresence Group 550 systems.
Enable Monitors
All connected monitors must support CEC, so that the feature can operate with RealPresence Group
systems. Not all HDMI monitors support CEC commands. Refer to the following list of CEC-enabled
monitors: CEC-XBMC
To verify that CEC is enabled, navigate to your monitor CEC settings. Many monitors also have sub-feature
settings under the main CEC setting that control whether or not the monitor responds to CEC commands.
For example, CEC Auto Power Off controls whether or not the monitor powers off when receiving a CEC
standby command. Make sure to enable all CEC sub-features.
Note: Enable all CEC monitors connected
Each monitor brand might have different CEC feature and sub-feature settings. Ensure that all
monitors connected to the RealPresence Group systems are all enabled for CEC.
Enable or Disable CEC on the RealPresence Group System
CEC functionality is enabled by default on RealPresence Group systems.
To enable or disable the CEC controls:
1 In the web interface, go to Admin Settings > Audio/Video > Monitors > Consumer Electronics
Control.
2 Select the Enable Consumer Electronics Control box to enable CEC. Clear the box to disable
CEC.
Note: HDMI channel identification
On the HDMI channel, the RealPresence Group Series system is identified as Polycom.
Polycom Cameras
Polycom RealPresence Group 700 systems provide inputs for multiple PTZ cameras. RealPresence Group
310 and 500 systems can support a second non-PTZ camera, but do not support camera control for a
second camera.
The RealPresence Group 550 systems can support two PTZ cameras, both with camera control.
All Polycom cameras are capable of receiving IR signals.
Polycom, Inc.
63
Monitors and Cameras
Polycom RealPresence Group systems have built-in IR receivers to receive signals from the remote control.
Be sure to point the remote control at the RealPresence Group system or your Polycom camera to control it.
HDCI cameras have Infrared receivers. You can always control the RealPresence
Group 550 system by pointing the remote control towards either the Polycom RealPresence
Group 550 system hardware or to the HDCI camera (if connected).
You may need a special cable to connect an SDI camera to the system so as to receive
infrared signals from the remote control. For more information about the special cable,
contact your Polycom support.
Polycom EagleEye IV
The Polycom EagleEye IV cameras are completely digital with a 4k sensor that is specifically designed to
work with the RealPresence Group Series. They support 1080p60 resolution and are available with either
12x or 4x zoom capabilities.
Polycom EagleEye IV
These cameras also have an available privacy cover, wide-angle lens, and digital extender. For more
information, refer to Installing the Polycom EagleEye IV Wide Angle Lens, Setting Up the Polycom EagleEye
IV Cameras, Setting Up the Polycom EagleEye IV Camera Privacy Cover, and Setting Up the Polycom
EagleEye Digital Extender which are available at support.polycom.com.
Polycom EagleEye III
The Polycom EagleEyeTM III camera can provide 1080i 60/50 fps, 1080p 60 fps, and 720p 60/50 fps
resolutions on all Polycom RealPresence Group systems.
Polycom EagleEye III
Polycom EagleEye Acoustic
The Polycom EagleEye Acoustic camera can provide 1080p 25/30 fps resolution with embedded image
sensor processing (ISP) technology and has an auto focus lens system, two microphones for stereo audio
pickup, an IR detector, a status LED, and a captured HDCI cord for connection to the system.
Polycom, Inc.
64
Monitors and Cameras
Polycom EagleEye Acoustic
Polycom EagleEye Producer
Polycom EagleEye Producer is a camera peripheral technology that works with Polycom EagleEye III and
EagleEye IV cameras to provide room framing and participant counting.
Polycom EagleEye Producer
Polycom EagleEye Director
The Polycom EagleEye Director is a high-end automatic camera positioning system that works in
conjunction with a Polycom RealPresence Group system to provide accurate close-up views of the person
who is speaking. The EagleEye Director also provides smooth transitions between the close-up view of the
person who is speaking and the room view.
Note: EagleyEye Director camera compatibility
The EagleEye Director is only compatible with EagleEye III cameras.
Polycom EagleEye Director
The EagleEye Director uses a dual-camera system. While one camera tracks the person who is speaking,
the other camera captures the room view. The EagleEye Director shows the room view while the camera
moves from one speaker to another. When the tracking camera locates a person who is speaking, the
EagleEye Director camera switches to a close-up of that person. By providing automatic and intelligent
views in various speaking scenarios during a conference, the EagleEye Director delivers a user experience
similar to a newscast video production.
Polycom, Inc.
65
Monitors and Cameras
Polycom EagleEye II
The Polycom EagleEye II camera can provide 1080i 60/50 fps for Polycom RealPresence Group systems.
Polycom EagleEye II
Polycom EagleEye HD
You can use the Polycom EagleEye HD camera with all Polycom RealPresence Group systems. Polycom
EagleEye HD cameras provide 720p resolution.
Polycom EagleEye HD
Polycom EagleEye 1080
You can use the Polycom EagleEye 1080 camera for RealPresence Group systems with the 1080p
Resolution option installed to send 1080p video. You can also use the Polycom EagleEye 1080 camera with
systems that do not have the 1080p Resolution option, to see local video in 1080 format.
Polycom EagleEye 1080
Note: Use supplied cables to connect
When connecting a Polycom EagleEye 1080 camera to any input on a Polycom RealPresence Group
system, use the cable and power supply that arrived with the camera. You must always use the power
supply because the Polycom EagleEye 1080 camera does not receive power from the RealPresence
Group system.
Polycom EagleEye View
The Polycom EagleEye View camera is a manual-focus, electronic pan, tilt, and zoom (EPTZ) camera that
includes built-in stereo microphones and a privacy shutter. The Polycom EagleEye View camera is available
with the Polycom RealPresence Group systems as the system camera and the main microphone. For more
Polycom, Inc.
66
Monitors and Cameras
information about the Polycom EagleEye View microphones, refer to Polycom EagleEye View and
EagleEye Acoustic Microphones.
You can install the Polycom EagleEye View in a base-down orientation or inverted. To change the camera’s
orientation after installation, disconnect all cables attached to the camera. Then install the camera with the
preferred orientation and reconnect the camera.
Polycom EagleEye View
Note: Cable for audio
When connecting a Polycom EagleEye View camera, use the cable with the brown connector that
arrived with the camera if you want to use the camera’s built-in microphones. Other cables do not
carry the audio signals.
The Polycom EagleEye View camera can provide 1080i video to RealPresence Group systems.
SDI Cameras
SDI cameras allow long-distance transmission of high definition images without degrading the video quality.
You can control the camera using the RS-232 port.
Connect Cameras to RealPresence Group Systems
Refer to your system setup sheet and to the Polycom RealPresence Group Series Integrator Reference
Guide for connection details. Refer to the release notes for a list of supported PTZ cameras. If you connect
a supported PTZ camera, the system detects the camera type and sets the appropriate configuration. Make
sure that the system is powered off before you connect devices to it.
Note: One EagleEye Director per system
Do not connect more than one Polycom EagleEye Director to a single RealPresence Group system.
Power Cameras with RealPresence Group Systems
The RealPresence Group systems can provide power to the EagleEye III and EagleEye IV cameras through
an HDCI connector. The cameras do not require any additional power supply or IR extender. However, the
RealPresence Group 700 system supports a low-power standard that limits the power supplied to the
camera when the system is powered off. So, if the camera is receiving its power only from the HDCI
connector attached to the system, it does not have an active IR receiver capable of powering on the
RealPresence Group system using the handheld remote.
If the camera IR is the only exposed IR and you normally power the system on and off with the handheld
remote control, use one of these solutions:
● Provide direct power to the EagleEye III or EagleEye IV camera with the optional EagleEye camera
power supply, 1465-52748-040. This allows the IR sensor to remain powered on, so that the camera
is capable of receiving IR commands from the remote control.
Polycom, Inc.
67
Monitors and Cameras
● Position the RealPresence Group system so that the IR receiver on the front of the system has a
line-of-sight to the remote control.
● Use a third-party IR extender to extend the IR signal from the room to the IR receiver on the front of
the RealPresence Group system.
Note: Waking a sleeping camera
When you use a RealPresence Group system to provide power to an EagleEye III or EagleEye IV
camera, you can wake a sleeping camera by sending a signal to the camera's IR sensor with the
remote control
Configure Video Input Settings
Refer to System Back Panel Views for an illustrated view of the inputs and outputs available for each
RealPresence Group system. Although you can connect devices that are not automatically discovered, the
available choices in the interface might not be the same as they would for automatically discovered devices.
For example, if you connect an unsupported camera, the system attempts to show video. Polycom does not
guarantee that the results will be optimal or that you will be able to set up the camera the same as a
supported camera.
To configure camera and video settings in the web interface:
» Go to Admin Settings >Audio/Video > Video Inputs.
Configure General Camera Settings
Setting
Description
Allow Other Participants In a
Call to Control Your Camera
Specifies whether other sites can adjust the view in your camera.
Power Frequency
Specifies the power line frequency for your system.
In most cases, the system defaults to the correct power line frequency, based
on the video standard used in the country where the system is located. This
setting allows you to adapt the system in areas where the power line frequency
does not match the video standard used. You might need to change this
setting to avoid flicker from the fluorescent lights in your conference room.
Make This Camera Your Main
Camera
Specifies which is the primary camera. You specify the main camera when you
set up the system, but you can change that selection here.
Input 1 is typically your main camera.
Polycom, Inc.
68
Monitors and Cameras
Setting
Description
Enable People+Content™ IP
Enables the ability to use the People+Content IP application.
Enable Camera Preset
Snapshot Icons
Enables the use of snapshot icons that represent camera preset
configurations. The default setting is controlled by the Security Profile, but you
can change the default here.
If you change your security profile setting from Low or Medium to High or
Maximum, or if you disable the setting, the RealPresence Group system
replaces each preset image with a blue, striped box. Presets that have not
been configured show as empty rectangles.
When you disable the Enable Camera Preset Snapshot Icons setting in the
web interface, the blue, striped boxes in the local interface show you which
presets are configured, but enabling the setting does not redisplay the
shapshot icons. You can see shapshot icons that represent preset
configuration images only when you configure a preset with the Enable
Camera Preset Snapshot Icons setting enabled.
Configure Input Settings
Configure the following settings for each input connected to your RealPresence Group system.
Note: Only applicable settings display
Settings that don’t apply to the selected input are not displayed.
Setting
Description
Enable
Specifies the input type. You can also choose to Auto select the input type.
For RealPresence Group 300, RealPresence Group 310, and RealPresence
Group 500 systems, Input 1 is always HDCI, so you will not see an Enable
setting here.
For RealPresence Group 550 systems, Input 1 is always HDCI, so you will not
see an Enable setting.
Note: RealPresence Group 300 systems have only one video input.
RealPresence Group 310 systems and RealPresence Group 500 systems
have two video inputs, but only HDMI and VGA are allowed for the second
input.
Model
Displays the type of device using the input port.
Name
Displays the default name of the input, but you can enter your own name for
the device.
Display as
Specifies whether the input is to be used for People or Content.
The selection you make here determines the available settings for the device
in the embedded interface. For example, a People source has settings for PTZ
and near/far camera control, but a Content source has different settings.
For RealPresence Group 550 systems, you can set only Input 1 and Input 2
for People, and Input 3 for Content.
Polycom, Inc.
69
Monitors and Cameras
Setting
Description
Input format
Specifies the source type of the device. This setting is read only unless the
system does not detect the device.
Optimized for
Specifies Motion or Sharpness for the video input.
• Motion—This setting is for showing people or other video with motion.
• Sharpness—The picture will be sharp and clear, but moderate to heavy
motion at low call rates can cause some frames to be dropped. Sharpness
is available in point-to-point H.263 and H.264 calls only. It is required for HD
calls between 512 kbps and 2 Mbps.
Tracking Mode (EagleEye
Director)
Specifies the type of camera tracking:
• Voice—Tracks the speaker. When another speaker starts talking, the view
switches from the first speaker to the room, then to the next speaker.
• Direct Cut—Tracks directly from speaker to speaker if silence intervals are
less than 3 seconds. You must recalibrate the left camera when you select
Direct Cut mode.
If camera tracking has not been calibrated, Tracking Mode is unavailable.
Note: This setting is available only when you have installed an EagleEye
Director.
Tracking Speed (EagleEye
Director)
Determines how quickly the system finds someone new and switches to that
person.
Note: This setting is available only when you have installed an EagleEye
Director.
Backlight Compensation
Specifies whether to have the camera automatically adjust for a bright
background. Backlight compensation is best used in situations where the
subject appears darker than the background.
Enabling this setting helps to relieve a bright background, which can impact
the tracking performance of the Polycom EagleEye Director.
White Balance
Specifies how the camera compensates for variations in room light sources.
Select Auto, Manual, or a color temperature value. The color temperature
values, measured in degrees Kelvin, correspond to the color of ambient light in
a room. Because the available color temperature values vary by camera, this
list is only a sampling of some of the values you might see in the interface:
• 3200 K (tungsten bulb)
• 3680 K (warm office fluorescent)
• 4160 K (cool office fluorescent)
• 5120 K (neutral daylight)
• 5600 K (cool daylight)
Brightness
Provides a slider to adjust how bright the image is.
Color Saturation
Provides a slider to adjust how colorful the image is.
Polycom, Inc.
70
Monitors and Cameras
Setting
Description
Tracking Mode (EagleEye
Producer)
Specifies the tracking mode:
• Group Framing - This is the default setting. Enables automatic tracking
and framing of the group of participants in the room.
• Off - Disables automatic tracking. All camera control must be handled
manually.
Note: This setting is available only when you have installed an EagleEye
Producer.
Tracking Speed (EagleEye
Producer)
Specifies the tracking speed:
• Slow - Detects meeting participants at a slow speed rate.
• Normal - This is the default tracking speed. Detects meeting participants at
a normal speed rate.
• Fast - Detects meeting participants at a fast speed rate.
• Note: This setting is available only when you have installed an EagleEye
Producer.
Group Framing (EagleEye
Producer)
Specifies the group framing view:
• Wide - Establishes a wide view of meeting participants.
• Medium - This is the default group framing view. Establishes a medium
view of meeting participants.
• Tight - Establishes a close-up view of meeting participants.
EagleEye Producer can detect the position of a person within six meters or
less.
Note: This setting is available only when you have installed an EagleEye
Producer.
Configure a Third-Party Camera
The RealPresence Group Series systems support some third-party cameras. For a list of supported
third-party cameras and their connectors, see the Polycom RealPresence Group Series Integrator
Reference Guide.
If your camera has a breakout cable that allows the video to be connected to the HDCI port, you can use
either of the following two ways to get the serial data to and from the camera:
1 Use the HDCI port:
a On the system’s back panel, connect the camera to the HDCI video input port.
b In the web interface, go to Admin Settings > Audio/Video > Video Inputs and configure the
settings.
2 Use the external serial port:
a On the system’s back panel, connect the camera to the serial port.
b In the web interface, select Admin Settings > General Settings > Serial Ports.
c For the RS-232 Mode setting, select Camera Control to enable the external serial port.
d Configure the Serial Port Options. Use the following settings:
Polycom, Inc.
71
Monitors and Cameras
Setting
Value
Baud Rate
9600
Parity
None
Data Bits
8
Stop Bits
1
RS-232 Flow Control
None
You can use the external serial port with any one of the following video inputs:
RealPresence Group System
Video Input 1
Video Input 2
Video Input 3
Video Input 4
RealPresence Group 300 System
Yes
N/A
N/A
N/A
RealPresence Group 310 System
Yes
Yes
N/A
N/A
RealPresence Group 500 System
Yes
Yes
N/A
N/A
RealPresence Group 550 System
Yes
Yes
N/A
N/A
RealPresence Group 700 System
Yes
Yes
Yes
Yes
Note: Usage of serial ports
Some cameras come with a breakout cable that allows you to use the camera with the HDCI serial
port. If you use the HDCI serial port, the cable has embedded serial capabilities, so you can use
either method mentioned in this section to connect the camera. However, if you connect a camera to
a Composite or HDMI port on the RealPresence Group system, you must control the camera through
the external serial port.
Set Up the EagleEye Producer
Information on required cables and how to set up EagleEye Producer are included in Set Up the Polycom
EagleEye Producer. Additional information is available in the Polycom RealPresence Group Series
Integrator Reference Manual. Both documents are located at support.polycom.com.
Update EagleEye Producer with RealPresence Group Series
Updates to Polycom EagleEye Producer software are included with the RealPresence Group system
software updates. To update your EagleEye Producer, connect it to the RealPresence Group system before
you run a software update. The software update program detects the EagleEye Producer and updates it if
necessary. No license number or key code is needed to update the EagleEye Producer.
EagleEye Producer must run a software version that is compatible with the software version on the
RealPresence Group system. For more information, refer to the current Polycom Supported Products matrix
at Polycom Service Policies.
Polycom, Inc.
72
Monitors and Cameras
Update the EagleEye IV Camera Firmware
The RealPresence Group system does not update an EagleEye IV camera attached to EagleEye Producer.
To update the EagleEye IV camera firmware, you must connect it directly to the RealPresence Group
system.
To update the EagleEye IV camera firmware:
1 Disconnect the EagleEye IV camera from the EagleEye Producer.
2 Connect the EagleEye IV camera directly to the RealPresence Group system.
The RealPresence Group system updates the camera firmware.
3 Reconnect the EagleEye IV camera to the EagleEye Producer.
Change Camera Tracking Settings
The Polycom EagleEye Producer detects the people in the room and provides room framing during a
conference. Group framing, with a Normal tracking speed and Medium view, is enabled by default You can
change the camera tracking settings, as described below.
Polycom recommends calibrating the Polycom EagleEye Producer before adjusting camera features.
For instructions on how to calibrate the Polycom EagleEye Producer, refer to the Polycom
EagleEye Producer User Guide at support.polycom.com.
To change camera tracking settings:
1 Do one of the following:
 In the local interface of the RealPresence Group Series system, go to Settings > Administration
> Camera Tracking > Settings.
 In the web interface of the RealPresence Group Series system, go to Admin Settings >
Audio/Video > Video Inputs> Settings and select the Input used by the Polycom EagleEye
Producer.
2 Configure the following settings.
Setting
Description
Tracking Mode
Specifies the tracking mode:
• Group Framing - This is the default setting. Enables automatic tracking and
framing of the group of participants in the room.
• Off - Disables automatic tracking. All camera control must be handled manually.
Polycom, Inc.
73
Monitors and Cameras
Setting
Description
Tracking Speed
Specifies the tracking speed:
• Slow - Detects meeting participants at a slow speed rate.
• Normal - This is the default tracking speed. Detects meeting participants at a
normal speed rate.
• Fast - Detects meeting participants at a fast speed rate.
Group Framing
Specifies the group framing view:
• Wide - Establishes a wide view of meeting participants.
• Medium - This is the default group framing view. Establishes a medium view
of meeting participants.
•
Tight - Establishes a close-up view of meeting participants.
Stop and Start Camera Tracking
Camera tracking starts automatically when you start a call and enables group framing. You can also
manually enable or disable camera tracking.
To enable camera tracking:
» In the local interface of the RealPresence Group system, go to Menu > Cameras and select Start
Camera Tracking.
To disable camera tracking:
» In the local interface of the RealPresence Group system, go to Menu > Cameras and select Stop
Camera Tracking.
After a call ends, camera tracking stops automatically and group framing is disabled.
View System Status
To view the system status of an EagleEye Producer, do one of the following:
● In the local interface of the RealPresence Group Series system, go to Settings> System
Information> Status.
● In the web interface of the RealPresence Group Series system, go to Diagnostics > System >
System Status.
If a Polycom EagleEye Producer is connected, the connection status displays. If the camera is not
connected or is not selected as the current camera source, this choice is not visible on the screen.
To view more information about Polycom EagleEye Producer, select More Info.
For more information about using EagleEye Producer, refer to the Polycom EagleEye Producer User Guide
on support.polycom.com.
Polycom, Inc.
74
Monitors and Cameras
Configure the Polycom EagleEye Director
Use the remote control or web interface to configure the Polycom EagleEye Director. You cannot configure
the EagleEye Director using the Polycom Touch Control, but you can start and stop camera tracking.
For setup instructions, refer to Setting up the Polycom EagleEye Director on support.polycom.com.
After setting up the EagleEye Director, follow these steps to get started:
1 Power on the EagleEye Director.
You can verify that the device is detected and compatible with the RealPresence Group system’s
software on the System Status page. Do one of the following:
 In the local interface, go to Settings > System Information > Status > EagleEye Director.
 In the web interface, go to Diagnostics > System > System Status > EagleEye Director.
As long as you see EagleEye Director among the status settings, the device has been detected.
2 Calibrate the cameras. Refer to Calibrate the EagleEye Director Cameras for instructions. If you
notice that the speaker is not framed accurately, ensure that the vertical bar of the EagleEye
Director is vertical. Placing the EagleEye Director on a horizontal surface can help to ensure that the
vertical bar is vertical. You might also need to recalibrate the cameras.
3 Adjust the room view. Refer to Adjust the Room View for instructions.
Notes: Troubleshoot EagleEye Director calibration
When the system first detects the EagleEye Director, a calibration wizard starts. If the EagleEye
Director is not detected, try one of the following solutions:
• Ensure all cables are tightly plugged in, then attempt camera detection again. If you are using
EagleEye Director version 1.0 software, you might need to ensure that the ball stubs are tightly
pressed into the hole on the base after checking the cables.
• Restart the RealPresence Group system.
• Manually power off the EagleEye Director by unplugging its power supply and unplugging the HDCI
cable from the RealPresence Group system. Then power on the EagleEye Director, plug the HDCI
cable into the RealPresence Group system, and attempt camera detection again.
Calibrate the EagleEye Director Cameras
In Voice Tracking mode, you only need to calibrate the right camera. In Direct Cut mode, calibrate the right
camera and then left one.
To calibrate the cameras:
1 Do one of the following:
 In the local interface, go to Settings > Administration > Camera Tracking > Calibration.
 In the web interface, go to Admin Settings > Audio/Video > Video Inputs and select Calibrate
Voice Tracking.
2 Follow the directions in the Auto Calibration page that appears. When you click Start,
auto-calibration begins. When the automatic process ends, you have these choices:
 Yes, I see a green box around my mouth. Selecting this choice means auto-calibration was
successful and you can move forward with adjusting the room view, if you like.
Polycom, Inc.
75
Monitors and Cameras
 No, I see a green box, but it is not around my mouth. Selecting this choice means you can try
auto-calibration again or manually calibrate the camera.
 No, I do not see a box at all. Selecting this choice means you must manually calibrate the
camera.
3 If necessary, follow these steps to manually calibrate the camera:
a Use the arrow buttons and zoom controls on the remote control or web interface to zoom
completely in, then aim the camera at your mouth.
b Select Begin Calibration or Start and follow the onscreen instructions until a message displays
indicating successful calibration.
Note: Calibration tips
Ensure that only one person speaks while you are calibrating the cameras and keep the background
quiet.
If you rearrange or move the Polycom EagleEye Director, recalibrate it.
If you cannot successfully calibrate the cameras, ensure that all seven EagleEye Director tracking
microphones are working correctly. Five of those microphones are horizontal and two are vertical reference
audio microphones. Calibration fails if any of the microphones do not work. For ways to test microphone
functionality, refer to the Camera Tracking settings in Diagnostics, Status, and Utilities.
Adjust the Room View
1 Do one of the following:
 From the local interface, go to Settings > Administration > Camera Tracking > Calibration,
and then select Begin Calibration.
 From the web interface, go to Admin Settings > Audio/Video > Video Inputs, and then select
the Input used by the Polycom EagleEye Director.
2 Do one of the following:
 In the local interface, select Skip to move to the Adjust Room View screen.
 In the web interface, select Adjust Room View.
3 Use the arrow buttons and zoom controls on the remote control or web interface to show the room
view you want far site participants to see.
4 Select Finish to save the settings and return to the Camera Settings screen.
Enable and Disable Camera Tracking with EagleEye Director
If EagleEye Director tracking is enabled, the camera follows the person or people who are speaking. This
tracking action, also called automatic camera positioning, can be manually started or stopped.
To enable camera tracking:
» Do one of the following:
 In the local interface, go to Settings > Administration > Camera Tracking > Settings.
Polycom, Inc.
76
Monitors and Cameras
 For the Tracking Mode setting, select Voice.
This is the default tracking mode. In this mode, the camera automatically tracks the current
speaker in the room using a voice tracking algorithm.
When you select the Voice Tracking Mode, you can also choose the Tracking Speed. This
speed determines how quickly the camera moves to each person who speaks. The default
speed is Normal.
If voice tracking does not work as expected, make sure the microphones are functioning
properly. For ways to test microphone functionality, refer to the Camera Tracking settings in
Diagnostics, Status, and Utilities.
 In the web interface, go to Admin Settings > Audio/Video > Video Inputs, and then select the
Input used by the Polycom EagleEye Director.
 Enable the Use Voices to Track People setting.
 If the RealPresence Group system is paired with a Polycom Touch Control, follow these steps:
1
Touch Cameras on the Home screen or the Call screen.
2
If the EagleEye Director is not currently selected, select it:
3
Touch Select Cameras and select the EagleEye Director camera.
4
Touch Control Camera.
5
Select Start Camera Tracking.
To disable camera tracking:
» Do one of the following:
 In the local interface, go to Settings > Administration > Camera Tracking > Settings.
 For the Tracking Mode setting, select Off.
In this mode, the tracking function is disabled. You must manually move the camera using the
remote control or the Polycom Touch Control.
 In the web interface, go to Admin Settings > Audio/Video > Video Inputs, and then select the
Input used by the Polycom EagleEye Director.
 Disable the Use Voices to Track People setting.
 If the RealPresence Group system is paired with a Polycom Touch Control, touch Cameras on
the Home screen or the Call screen and select Stop Camera Tracking.
To start or stop camera tracking in the local interface:
» Whether you are or are not in a call, go to Menu > Cameras and select Start Camera Tracking or
Stop Camera Tracking, as needed.
Camera tracking can also start or stop based on the following actions:
● Camera tracking starts automatically when you make a call.
● Camera tracking stops after you hang up a call.
● Camera tracking temporarily stops when you mute the RealPresence Group system in a call. It
resumes when you unmute the system. If camera tracking is disabled, pressing Mute on the remote
control does not affect tracking.
Polycom, Inc.
77
Monitors and Cameras
Note: Room lighting and tracking
Tracking performance can be affected by room lighting. If the room is too bright for camera tracking to
work properly, you can improve the tracking performance by adjusting the Backlight Compensation
setting on the Cameras screen. To find this setting in the web interface, go to Admin Settings >
Audio/Video > Video Inputs and select the appropriate Input. For more hints on setting up the
EagleEye Director, see Position the Polycom EagleEye Director.
Enable Camera Presets
Camera presets are stored camera positions that you can create in the local interface before or during a
call. Presets allow you to do the following:
● Automatically point a camera at pre-defined locations in a room.
● Select a video source.
If your camera supports pan, tilt, and zoom movement, and it is set to People, you can create up to 10 preset
camera positions for it using the remote control or the Polycom Touch Control. Each preset stores the
camera number, its zoom level, and the direction it points (if appropriate).
If far-end camera control (FECC, which, for RealPresence Group systems, is the Allow Other Participants
in a Call to Control Your Camera setting under Admin Settings > Audio/Video > Video Inputs > General
Camera Settings) is allowed, you can create 10 presets for the far-site camera. These presets are saved
only for the duration of the call. You might also be able to use presets that were created at the far site to
control the far-site camera.
If a Polycom Touch Control is paired with a Polycom RealPresence Group system, you must use the
Polycom Touch Control to create presets. For more information about creating and using presets, refer to
the User’s Guide for the Polycom RealPresence Group Series and User’s Guide for the Polycom
RealPresence Group Series and the Polycom Touch Control. Once presets are in place, you can view them
in the web interface by going to Utilities > Tools > Remote Monitoring.
Note: Voice tracking preset limitation
If you use a Polycom EagleEye Director with your RealPresence Group system, you cannot use
presets for voice tracking.
Experience High-Definition Video Conferencing
Polycom RealPresence Group systems offer the following high-definition (HD) capabilities:
● Send people or content video to the far site in HD
● Receive and display video from the far site in HD
● Display near-site video in HD
● Full-motion HD
Send Video in High Definition
Polycom RealPresence Group systems with HD capability can send video in wide-screen, HD format. For
information about frame rates for content, refer to Content.
Polycom, Inc.
78
Monitors and Cameras
To send video in HD format, use any model of Polycom camera that supports HD video and a Polycom
RealPresence Group system capable of sending 720p or better video.
Receive and Display Video in High Definition
When the far site sends HD video, Polycom RealPresence Group systems with HD capability and an HD
monitor can display the video in wide-screen, HD format. The HD 720 format supported by these systems
is 1280 x 720, progressive scan format (720p). Polycom RealPresence Group systems with 1080 capability
can receive 1080p progressive format and can display 1080p progressive or 1080i interlaced format.
Near-site video is displayed in HD format when you use an HD video source and an HD monitor. However,
near-site video is displayed in SD if the system is in an SD or lower-resolution call.
To use HD for a multipoint call, keep the following requirements in mind:
● The call must be hosted by a RealPresence Group system or a conferencing platform that supports
HD such as Polycom RealPresence Collaboration Server 1500 or 2000.
● The RealPresence Group system host must have the appropriate options installed.
● All systems in the call must support HD (720p at 30 fps) and H.264.
● The call rate must be high enough to support HD resolution, as shown in Multipoint Resolutions for
High Definition Video.
● The call cannot be cascaded.
For more information about multipoint calls, refer to Multipoint Call Speeds.
Use Full-Motion HD
With RealPresence Group Series systems, Polycom sets a higher bar for video and audio performance.
Seeing participants in full 1080p 60 fps, or full-motion HD, brings video to a new level of realism. Full-motion
HD provides those clear, vibrant visuals and flawless audio that are critical to replicating an “in the same
room” experience.
In group collaboration, the quality of content is as important as the quality of the people on video. Content
that is grainy, pixelated, or slow to update makes it hard to get the most out of your meetings. With Polycom
RealPresence Group systems, you share full-motion HD people and content at the same time, which helps
eliminate compromises when sharing across distances.
Polycom, Inc.
79
Microphones and Speakers
To receive and send audio, you must connect and configure both microphones and speakers. This section
contains placement information for various audio inputs and speakers. It also covers audio settings
available from the web interface.
● Audio Input Configuration Options
● Available Microphone Inputs by System
● RealPresence Group 700 microphone inputs
● Audio Output
● Configure Audio Settings
● Audio Meters
● Test StereoSurround
For specific details regarding how to connect audio inputs and speakers, refer to the appropriate
RealPresence Group system setup sheet and System Back Panel Views. For information about required
cables, refer to the Polycom RealPresence Group Series Integrator Reference Guide.
Audio Input Configuration Options
You can use a variety of audio inputs with your RealPresence Group system. See the following sections to
determine what audio inputs work with your system. For tips specific to the type of audio input you use, refer
to RealPresence Group 700 microphone inputs.
RealPresence Group 300, RealPresence Group 310, and RealPresence Group 500,
and RealPresence Group 550 Microphone Input Options
RealPresence Group 300, RealPresence Group 310, and RealPresence Group 500, and RealPresence
Group 550 systems can support any of the following devices:
● Two RealPresence Group microphone arrays or two Polycom HDX microphone arrays
● One SoundStation IP 7000 conference phone and one RealPresence Group or Polycom HDX
microphone array
● One SoundStructure C-Series device and up to four RealPresence Group or Polycom HDX
microphone arrays
● Polycom EagleEye View or EagleEye Acoustic with microphones enabled
RealPresence Group 700 Microphone Input Options
RealPresence Group 700 systems can support any of the following devices:
● Three Polycom RealPresence Group microphone arrays or three Polycom HDX microphone arrays
Polycom, Inc.
80
Microphones and Speakers
● One SoundStation IP 7000 conference phone and two RealPresence Group or Polycom HDX
microphone arrays
● One SoundStructure C-Series device and up to four RealPresence Group or Polycom HDX
microphone arrays
● Polycom EagleEye View or EagleEye Acoustic with microphones enabled
Available Microphone Inputs by System
The number of audio inputs varies based on the RealPresence Group system you are using.
As shown in the following figures, the RealPresence Group 300, RealPresence Group 310, and
RealPresence Group 500 systems have one microphone input, while the RealPresence Group 700 system
has two. You can freely configure the way you connect devices to a system, as long as you do not exceed
the limits mentioned in the following sections. If you are using the RealPresence Group 700 system, you
can connect devices to either or both inputs as long as you stay within the guidelines for the total number
of devices allowed for the system.
As shown in the following figures, the RealPresence Group 300, RealPresence Group 310, and
RealPresence Group 500, and RealPresence Group 550 systems have one microphone input, while the
RealPresence Group 700 system has two. You can freely configure the way you connect devices to a
system, as long as you do not exceed the limits mentioned in the following sections. If you are using the
RealPresence Group 700 system, you can connect devices to either or both inputs as long as you stay
within the guidelines for the total number of devices allowed for the system.
RealPresence Group 300, 310, and 500 microphone input
.
RealPresence Group 550 System
RealPresence Group 700 microphone inputs
Audio Input Tips by Microphone Type
Make sure that the RealPresence Group system is powered off before you connect audio devices to it.
Polycom RealPresence Group System Table or Ceiling Microphone Arrays
Polycom microphone arrays contain three microphone elements for 360° coverage. You can connect
multiple Polycom microphone arrays to a RealPresence Group system.
For the best audio experience, do the following:
● Place the microphone array on a hard, flat surface (table, wall, or ceiling) away from obstructions, so
the sound will be directed into the microphone elements properly.
Polycom, Inc.
81
Microphones and Speakers
● Place the microphone array near the people closest to the monitor.
● In large conference rooms, consider using more than one microphone array. Each Polycom
microphone array covers a 3-6 foot radius, depending on the noise level and acoustics in the room.
The following table describes the behavior of the microphone lights on a Polycom table microphone.
Microphone Light
Status
Off
Not in a call
Green
In a call, mute off
Red
Mute on
Blinking Red
Configuration error occurred, such as exceeding the number of supported conference link
devices
Amber
Firmware upload
Polycom EagleEye View and EagleEye Acoustic Microphones
Polycom EagleEyeTM View and EagleEye Acoustic cameras include built-in stereo microphones. The
following tips can help you achieve the best audio when using these cameras:
● Enable Polycom StereoSurround.
● Place the camera at least 1 foot away from any walls to minimize boundary effects.
● Ensure that the people speaking are no more than 7 feet away from the EagleEye View or EagleEye
Acoustic camera. The maximum distance covered depends on the noise level and acoustics in the
room. If you connect a Polycom microphone, Polycom SoundStation® conference phone, or Polycom
SoundStructure® to the RealPresence Group system microphone input while an EagleEye View or
EagleEye Acoustic camera is connected to the system, the camera’s built-in microphones are
automatically disabled.
● Polycom recommends connecting other audio input devices in conference rooms larger than 12 feet
by 15 feet.
Polycom SoundStation IP 7000 Conference Phone
When you connect a Polycom SoundStation IP 7000 conference phone to a Polycom RealPresence Group
system, the conference phone becomes another way to dial audio or video calls. The conference phone
also operates as a microphone, and as a speaker in audio-only calls. For more information, refer to the
following documents on the Polycom web site:
● Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom RealPresence Group
System in Unsupported VoIP Environments Integration Guide
● Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom RealPresence Group
System in Unsupported VoIP Environments User Guide
Non-Polycom Microphones
You can connect non-Polycom microphones directly to audio input 1 on a Polycom RealPresence Group
system, or through a line-level mixer to the AUX audio input on any Polycom RealPresence Group system.
For more information about configuring these non-Polycom microphones, refer to Set Up Third-party
Microphones.
Polycom, Inc.
82
Microphones and Speakers
SoundStructure Digital Mixer
You can connect several microphones to a Polycom RealPresence Group system through a Polycom audio
mixer. Connecting a Polycom audio mixer to RealPresence Group systems provides flexibility in audio
setup. The SoundStructure C-Series mixer connects to the digital microphone connector on a Polycom
RealPresence Group system, and no configuration is necessary.
When incorporating a SoundStructure digital mixer, remember the following:
● Connect a SoundStructure digital mixer using the digital microphone input on the Polycom
RealPresence Group system.
● Adjusting the volume on a Polycom RealPresence Group system changes the volume of the
SoundStructure digital mixer that is connected.
● The following configuration settings are not available on a Polycom RealPresence Group system
when a SoundStructure digital mixer is connected: Audio input 1 (Line In), Bass, Treble, Enable
Polycom Microphones, Enable MusicMode™, and Enable Keyboard Noise Reduction.
● The Polycom RealPresence Group system Line Output is muted when a SoundStructure digital mixer
is connected.
● All echo cancellation is performed by the SoundStructure digital mixer.
For example, it allows you to provide a microphone for each call participant in a boardroom. Refer to the
Polycom RealPresence Group Series Integrator Reference Guide for connection details.
Polycom Microphone Placement to Send Stereo from Your Site
The following illustrations show microphone placement examples for different room layouts.
Number of
Microphones with
Stereo Enabled
Long Table
Wide Table
One
Mic 1 set to
Left+Right
Mic 1 set to
Left+Right
Two
Mic 1 set to
Left+Right
Mic 2 set to
Left+Right
Mic 1 set to
Left
Mic 2 set to
Right
Polycom, Inc.
83
Microphones and Speakers
Number of
Microphones with
Stereo Enabled
Three
Long Table
Wide Table
Mic 1 set to
Left+Right
Mic 2 set to
Left+Right
Mic 3 set to
Left+Right
Mic 1 set to
Left
Mic 2 set to
Left+Right
Mic 3 set to
Right
Not Used
Left Channel
Right
Left and right channel assignments depend on the settings that you select on the Stereo Settings screen. If
Autorotation is enabled for a microphone, the system automatically assigns active channels for the
microphone. Make sure that microphones with Autorotation disabled are oriented as shown in the following
illustration.
Microphone placement
After you place the microphones, you will need to configure the system to send stereo as described in Stereo
Settings.
Audio Output
You must connect at least one speaker to the Polycom RealPresence Group systems in order to hear audio.
You can use the speakers built into the main monitor, or you can connect an external speaker system, such
as the Polycom StereoSurround kit, to provide more volume and richer sound in large rooms.
When you connect a SoundStation IP 7000 conference phone to a Polycom RealPresence Group system,
the conference phone becomes another way to dial audio or video calls. The conference phone also
operates as a microphone, and as a speaker in audio-only calls.
Refer to your system setup sheet for connection details. Make sure that the system is powered off before
you connect devices to it. For more information about connecting speakers to RealPresence Group
systems, refer to System Back Panel Views.
Polycom, Inc.
84
Microphones and Speakers
Speaker Placement to Receive Stereo from Far Sites
The Polycom StereoSurround kit is designed for use with Polycom RealPresence Group systems. It
includes two speakers and a subwoofer.
When a RealPresence Group system is configured for Polycom StereoSurround, the audio inputs and
outputs are all treated as stereo. Otherwise, all audio inputs and outputs are mono.
When you set up the system for StereoSurround, the left microphone and speaker should be on the left from
the local room perspective. Place the speaker connected to the audio system’s right channel on the right
side of the system, and the other speaker on the left side. The system reverses the left and right channels
for the far site, as shown in the following illustration. This ensures that the sound comes from the appropriate
side of the room.
StereoSurround microphone and speaker placement
Left
Right
Sending stereo
Right
Left
Receiving stereo
For best results, place the speakers about 60° apart as seen from the center of the conference table.
Speaker with subwoofer placement
Left
speaker
Connect
to left
audio
output
Right speaker
Connect to
right audio
output (red)
If you use the subwoofer in the Polycom StereoSurround kit, place it beside a wall or in a corner near the
speakers.
Polycom, Inc.
85
Microphones and Speakers
Set the Speaker Volume
To set the volume of an external speaker system:
1 Do one of the following:
 In the local interface, go to Settings > System Information > Diagnostics > Speaker Test.
 In the web interface, go to Diagnostics > Audio and Video Tests > Speaker Test.
2 Click Start to start the speaker test.
3 Adjust the volume of the speaker system. From the center of the room the test tone should be as
loud as a person speaking loudly, about 80-90 dBA on a sound pressure level meter.
4 Click Stop to stop the speaker test.
Configure Audio Settings
There are several types of audio settings to configure in the web interface. They include the following:
● General Audio Settings
● Audio Input Settings
● Audio Output Settings
● Stereo Settings
All of these setting types are located in the same area of the web interface.
To configure any audio settings:
1 In the web interface, go to Admin Settings > Audio/Video > Audio.
2 Configure the settings for each section of the Audio screen that are described in this section of the
book.
Note: Audio settings with SoundStructure connected
Some audio settings are unavailable when a SoundStructure digital mixer is connected to the
Polycom RealPresence Group system. For more information, refer to Audio Output.
General Audio Settings
The general audio settings allow you to specify various user tones, sound effect volume, and more.
General Audio Settings
Setting
Description
Polycom StereoSurround
Specifies that Polycom StereoSurround is used for all calls.
To send or receive stereo audio, make sure your Polycom RealPresence Group
system is set up as described in Available Microphone Inputs by System and Audio
Output.
Sound Effects Volume
Sets the volume level of the ring tone and user alert tones.
Polycom, Inc.
86
Microphones and Speakers
Setting
Description
Ringtone
Specifies the ring tone used for incoming calls.
User Alert Tones
Specifies the tone used for user alerts.
Audio Mute
Auto-answered Calls
Specifies whether to mute incoming calls. Incoming calls are muted until you press
the Mute button on the microphone or on the remote control.
Note: You must first enable Auto Answer Point-to-Point Video or Auto Answer
Multipoint Video. These settings are in Admin Settings > General Settings >
System Settings > Call Settings. For details on these settings, see Configure Call
Settings.
Enable MusicMode
Specifies whether the system transmits audio using a configuration that best
reproduces interactive and live performance music picked up by microphones. This
mode provides the highest possible bandwidth for audio.
When MusicMode is enabled, even the faintest musical notes come through clearly.
Note: Automatic noise suppression and automatic gain control are disabled when
MusicMode is enabled.
Enable Keyboard Noise
Reduction and
NoiseBlock™
Specifies whether the system mutes audio from the RealPresence Group Series
microphones when keyboard tapping sounds or other extraneous noises are
detected, but no one is talking. NoiseBlock unmutes the system when speech is
detected, regardless of the existence of background noise.
Note: MusicMode is disabled when this setting is enabled. If an audio mixer is
used, keyboard noise reduction is not available.
Transmission Audio Gain
(dB)
Specifies the audio level, in decibels, at which to transmit sound. Unless otherwise
advised, Polycom suggests setting this value to 0 dB.
Enable Audio Mute
Reminder
Specifies whether to display a notification as a reminder to unmute the
RealPresence Group system microphone when speaking is detected.
Enable Join and Leave
Tones
Plays an audible tone when a participant in a multipoint call joins or leaves the call.
Note: This setting is available only when the multipoint option is installed.
Polycom, Inc.
87
Microphones and Speakers
Audio Input Settings
The RealPresence Group 300 system has no audio input settings, and the settings for the RealPresence
Group 310, 500, and 700 systems are quite different. The following tables describe each.
The RealPresence Group 300 system has no audio input settings, and the settings for the RealPresence
Group 310, RealPresence Group 500, RealPresence Group 700, and RealPresence Group 550 systems
are quite different. The following tables describe each.
RealPresence Group 310 and 500 Audio Input Settings
Setting
Description
Type
Displays Line (dual RCA, auxiliary audio input).
Audio Input Level
Sets the audio input level.
Echo Canceller
Specifies whether to use the system’s built-in echo canceller.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Type
Displays the 3.5mm connector for line-level stereo audio input.
Audio Input Level
Sets the 3.5 mm audio input level.
Use Input for
Microphone
Specifies use of the 3.5mm input on the RealPresence Group 500 system as either
video-associated input (when the setting is not enabled) or as an input for external
equipment (when enabled) such as external mixers like the Polycom Vortex.
When associated with the video input, the audio input is active only when the
associated video input is selected (VGA/HD15). This audio is mixed into the local
audio and sent to the far end. Functionality does not change whether the video input
is defined as people or content.
When used as an audio input for external equipment, the audio is mixed with the
input on the Polycom microphone array input and sent to the far end. This input will
be muted when the local mute is activated.
Echo Canceller
Specifies whether to use the system’s built-in echo canceller.
This setting is available only when the Use Input for Microphone setting is enabled.
Audio Meter (not labeled)
Displays the audio level for the 3.5 mm input port, left and right channels.
Type
Displays HDMI (HDMI connector embedded audio input, associated with video input
1).
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level for the HDMI input port, left and right channels.
Polycom, Inc.
88
Microphones and Speakers
Setting
Description
Type
Displays the 3.5mm connector for line-level stereo audio input.
Audio Input Level
Sets the 3.5 mm audio input level.
Use Input for
Microphone
Specifies use of the 3.5mm input on the RealPresence Group 500 system as either
video-associated input (when the setting is not enabled) or as an input for external
equipment (when enabled) such as external mixers like the Polycom Vortex.
When associated with the video input, the audio input is active only when the
associated video input is selected (VGA/HD15). This audio is mixed into the local
audio and sent to the far end. Functionality does not change whether the video input
is defined as people or content.
When used as an audio input for external equipment, the audio is mixed with the
input on the Polycom microphone array input and sent to the far end. This input will
be muted when the local mute is activated.
Echo Canceller
Specifies whether to use the system’s built-in echo canceller.
This setting is available only when the Use Input for Microphone setting is enabled.
Audio Meter (not labeled)
Displays the audio level for the 3.5 mm input port, left and right channels.
Type
Displays embedded audio from the HDMI connector.
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level for the HDMI input port, left and right channels.
RealPresence Group 550 Audio Input Settings
Setting
Description
Type
Displays Line (dual RCA, auxiliary audio input).
Audio Input Level
Sets the audio input level.
Echo Canceller
Specifies whether to use the system’s built-in echo canceller.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Type
Displays the 3.5mm connector for line-level stereo audio input.
Audio Input Level
Sets the 3.5 mm audio input level.
Use Input for
Microphone
Specifies use of the 3.5mm input on the RealPresence Group 500 system as either
video-associated input (when the setting is not enabled) or as an input for external
equipment (when enabled) such as external mixers like the Polycom Vortex.
When associated with the video input, the audio input is active only when the
associated video input is selected (VGA/HD15). This audio is mixed into the local
audio and sent to the far end. Functionality does not change whether the video input
is defined as people or content.
When used as an audio input for external equipment, the audio is mixed with the
input on the Polycom microphone array input and sent to the far end. This input will
be muted when the local mute is activated.
Polycom, Inc.
89
Microphones and Speakers
Setting
Description
Echo Canceller
Specifies whether to use the system’s built-in echo canceller.
This setting is available only when the Use Input for Microphone setting is enabled.
Audio Meter (not labeled)
Displays the audio level for the 3.5 mm input port, left and right channels.
Type
Displays HDMI (HDMI connector embedded audio input, associated with video input
1).
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level for the HDMI input port, left and right channels.
Setting
Description
Type
Displays the 3.5mm connector for line-level stereo audio input.
Audio Input Level
Sets the 3.5 mm audio input level.
Use Input for
Microphone
Specifies use of the 3.5mm input on the RealPresence Group 500 system as either
video-associated input (when the setting is not enabled) or as an input for external
equipment (when enabled) such as external mixers like the Polycom Vortex.
When associated with the video input, the audio input is active only when the
associated video input is selected (VGA/HD15). This audio is mixed into the local
audio and sent to the far end. Functionality does not change whether the video input
is defined as people or content.
When used as an audio input for external equipment, the audio is mixed with the
input on the Polycom microphone array input and sent to the far end. This input will
be muted when the local mute is activated.
Echo Canceller
Specifies whether to use the system’s built-in echo canceller.
This setting is available only when the Use Input for Microphone setting is enabled.
Audio Meter (not labeled)
Displays the audio level for the 3.5 mm input port, left and right channels.
Type
Displays embedded audio from the HDMI connector.
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level for the HDMI input port, left and right channels.
RealPresence Group 700 Audio Input Settings
Setting
Description
Type
Displays Line (dual RCA, auxiliary audio input).
Audio Input Level
Sets the audio input level.
Echo Canceller
Specifies whether to use the system’s built-in echo canceller.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Type
Displays 3.5 mm (line-level stereo audio input, associated with HD15/VGA video
input 3).
Polycom, Inc.
90
Microphones and Speakers
Setting
Description
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Type
Displays HDMI 1 (HDMI connector embedded audio input, associated with video
input 1).
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Type
Displays HDMI 2 (HDMI connector embedded audio input, associated with video
input 2).
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Type
Displays HDMI 3 (HDMI connector embedded audio input, associated with video
input 3).
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Type
Displays Component (dual RCA, associated with component video input 4).
Audio Input Level
Sets the audio input level.
Audio Meter (not labeled)
Displays the audio level of the line input, left and right channels.
Polycom, Inc.
91
Microphones and Speakers
Audio Output Settings
After you configure the general audio and audio input settings, configure the audio output settings.
Audio Output Settings
Setting
Description
Master Audio Volume
Sets the main audio output volume level going to the speakers.
Bass
Sets the volume level for the low frequencies without changing the master audio
volume.
Treble
Sets the volume level for the high frequencies without changing the master audio
volume.
Type
Display the current audio output type.
Output Mode
Specifies whether volume for a device connected to the line out connectors is variable
or fixed.
• Variable—Allows users to set the volume with the remote control.
• Fixed—Sets the volume to the Audio Level specified in the system interface.
Audio Output Level
Displays the output level meter for the current audio output type.
Stereo Settings
To send or receive stereo audio, make sure your Polycom RealPresence Group system equipment is set up
as described in Available Microphone Inputs by System and Audio Output. Then configure the system to
use Polycom StereoSurround, test the system configuration, and place a test call.
Polycom, Inc.
92
Microphones and Speakers
If you are in a call with a far site that is sending audio in stereo mode, you can receive in stereo. In multipoint
calls where some sites can send and receive stereo and some sites cannot, any site that is set up to send
or receive stereo will be able to do so.
Stereo Settings
Setting
Description
Polycom
Microphone Type
Displays the type of Polycom microphone being used.
Stereo
Positions the audio input within the left and right channels. Left sends all of the audio to the
left channel. Right sends all of the audio to the right channel. For Polycom digital
microphone and ceiling microphone arrays, Left+Right sends audio from one microphone
element to the left channel and audio from a second element to the right channel.
Autorotation
Specifies whether autorotation is used for Polycom microphones. If this feature is enabled,
the system automatically assigns left and right channels for the microphone based on
sound it senses from the left and right speakers.
Note: This feature does not work when headphones are used.
Audio Meter
(dB meter)
Lets you see the peak input signal level for Polycom microphones.
Audio Meters
The audio meters in the user interface allow you to identify left and right channels. The meters also indicate
peak signal levels. Set signal levels so that you see peaks between +3 dB and +7 dB with normal speech
and program material. Occasional peaks of +12 dB to +16 dB with loud transient noises are acceptable. If
you see +20 on the audio meter, the audio signal is 0 dBFS and the audio might be distorted.
Test StereoSurround
After you configure the system to use Polycom StereoSurround, test the system configuration and place a
test call.
To test your stereo configuration:
1 Make sure the microphones are positioned correctly.
Refer to Polycom Microphone Placement to Send Stereo from Your Site.
2 In the web interface, go to Admin Settings > Audio/Video > Audio.
3 Gently blow on the left leg and right leg of each Polycom microphone while watching the bar meters
to identify the left and right inputs.
4 Test the speakers to check volume and verify that audio cables are connected. If the system is in a
call, the far site hears the tone.
Exchange the right and left speakers if they are reversed.
Adjust the volume control on your external audio amplifier so that the test tone sounds as loud as a
person speaking in the room. If you use a Sound Pressure Level (SPL) meter, it should measure
about 80-90 dBA in the middle of the room.
Polycom, Inc.
93
Microphones and Speakers
Set Up Third-party Microphones
You can configure a Polycom RealPresence Group system to use non-Polycom microphones.
To configure a Polycom RealPresence Group system to use devices connected directly to
audio input 1:
1 In the web interface, go to Admin Settings > Audio/Video > Audio > Audio Input.
2 Do the following:
a Enable Use Input for Microphone, if available.
b Enable Echo Canceller.
c Adjust the Audio Input Level if necessary.
d Speak into the microphones that are connected to the audio line inputs. The audio meter should
peak at about 5 dB for normal speech.
Polycom, Inc.
94
Content
You can present content during calls when you use sources such as the following:
● A DVD player connected directly to a video input on a Polycom RealPresence Group system
● People+Content IP installed on a computer, with any Polycom RealPresence Group system
● A computer connected directly to a Polycom RealPresence Group system or a Polycom Touch
Control
● A USB drive connected to a Polycom Touch Control
Polycom RealPresence Group systems achieve maximum content frame rate of 30 fps for 1080p with a
1080p Resolution option key installed, and 60 fps for 720p. If you use Content as the Quality Preference
in your network IP settings, you can achieve a content frame rate of 60 fps for 1080p with the 1080p
Resolution option key installed.
To prepare for sharing content, see the following topics:
● Configure DVD Player Settings
● Connect Computers to Polycom RealPresence Group Systems
● Configure Content Sharing
● Configure Content Display with People+Content IP
● Use the Polycom VisualBoard Application
● Configure the Polycom UC Board
● Configure Closed Captioning
For more information about sharing content during a call, refer to the Polycom RealPresence Group Series
User Guide.
Configure DVD Player Settings
Whether you can play DVDs using your RealPresence Group system depends on the version you own:
● With a RealPresence Group 310, RealPresence Group 500, or a RealPresence Group 550 system,
you can connect a DVD player to an HDMI or VGA input to play content.
● With a Polycom RealPresence Group 700 system, you can also connect a DVD player to the
system’s video input to play DVDs in calls.
● Using a DVD player with a RealPresence Group 300 system is not a viable option.
Play a Videotape or DVD
The DVD inputs are active when you select the camera source configured as DVD. This means that both
the audio and video inputs are active—you cannot select one or the other. Because the microphone inputs
Polycom, Inc.
95
Content
remain active while the DVD player is playing, call participants might want to mute the microphones while
playing DVDs.
To configure DVD audio settings for playing a DVD on a RealPresence Group 310, 500, and
700 system:
1 In the web interface, go to Admin Settings > Audio/Video > Audio > Audio Input.
2 Set Line In Level for playback volume of the DVD player relative to other audio from the system.
Enable DVD Audio Out Always On unless you have the DVD inputs and outputs both connected to
the same device to play and record.
To configure DVD audio settings for playing a DVD on a RealPresence Group 550 system:
1 In the web interface, go to Admin Settings > Audio/Video > Audio > Audio Input.
2 Set the input level of your audio input (3.5 mm or HDMI) for the playback volume of the DVD player
relative to other audio from the system.
Connect Computers to Polycom RealPresence Group
Systems
You can connect a computer directly to a RealPresence Group system. When you do this, other call
participants can see everything that you see on your computer.
When you connect to video and audio from your computer, the audio is muted unless the computer is
selected as a video source.
For more information about connecting computers as content video sources for RealPresence Group
systems, refer to Configure Video Input Settings. Refer to your system setup sheet for connection details.
Configure Content Sharing
To configure the content display:
1 In the web interface, go to Admin Settings > Audio/Video > Video Inputs and select the input you
want to configure for Content.
Polycom, Inc.
96
Content
2 For the Display as setting, select Content for the input that will display content.
Note: RealPresence Group 550 Content
For RealPresence Group 550 systems, you can only set Input 3 for Content.
When you connect a content-sharing device such as a laptop to the input, the content starts
displaying. If the content-sharing device is already connected, you must manually show the content
from the local interface. For more information about showing content, refer to the Polycom
RealPresence Group Series User Guide.
As long as the default values for other settings in the system have not changed, you are ready to
share content on your RealPresence Group system. However, if you disabled the H.239 protocol for
some reason, you must enable the program for content sharing by following these steps:
3 In the web interface, go to Admin Settings > Network > Dialing Preference.
4 Enable H.239.
If the audio level of the call using content sharing needs to be adjusted, follow these steps to change
the level:
5 In the web interface, go to Admin Settings > Audio/Video > Audio > Audio Input.
6 Set the Audio Input Level.
Note: H.239 while in a call
You cannot enable or disable H.239 while in a call.
Configure Content Display with People+Content IP
People+Content IP enables a presenter to show content from a computer to other sites in a video
conference using only an IP network connection. The presenter can show PowerPoint® slides, video clips,
spreadsheets, or any other type of content from a computer. People+Content IP supports any computer
desktop resolution with color set to 16-bit or higher.
Before a presenter can use a computer to show content with People+Content IP, you need to do the
following:
● Download the People+Content IP software application from the Polycom web site to the computer or
computers that the presenter will use to show content.
You don’t need to change the computer resolutions and you don’t need special cables or hardware,
but each computer must meet these requirements:
 Operating System: Windows 7 or 8
 Minimum computer: 500 MHz Pentium® III (or equivalent); 256 MB memory
Recommended computer: 1 GHz Pentium III (or equivalent); 512 MB memory
● Connect the computer or computers to the IP network.
To install People+Content IP on a computer:
1 On a computer, open a web browser and go to the Polycom web site at www.polycom.com/ppcip.
2 Download and install the People+Content IP software.
Polycom, Inc.
97
Content
Note: Touch Control installs People+Content IP
If the Polycom RealPresence Group system is paired with a Polycom Touch Control,
People+Content IP does not need to be installed. If you connect the PC to the USB connection on the
underside of the Polycom Touch Control, a version of People+Content IP launches automatically.
Use the Polycom VisualBoard Application
The Polycom VisualBoard™ application allows you to show and annotate content in real time from Polycom
RealPresence Group systems by using an electronic annotation device such as a touch screen monitor. You
can use the monitor as your only content monitor or you can use it in addition to your current content monitor.
When using a touch screen monitor, you can annotate the content using finger, a stylus, or a mouse. When
using a standard monitor, you can use the UC Board device or a mouse to annotate. For flat, cold surfaces
such as white boards with projectors, Polycom suggests using the Polycom UC Board with the VisualBoard
application.
To enable the VisualBoard application:
1 In the web interface, go to Admin Settings > General Settings > System Settings >
VisualBoard.
2 Select Enable and click Save.
For more information about the VisualBoard application and the list of supported touch screen monitors,
refer to the Polycom VisualBoard Technology Application with Polycom RealPresence Group Series User
Guide at support.polycom.com.
Configure the Polycom UC Board
With the Polycom UC Board, you can show and annotate content in real-time from Polycom RealPresence
Group systems by using the stylus and receiver included with the UC Board hardware. You can use either
a second monitor or a whiteboard and projector.
Polycom, Inc.
98
Content
Polycom UC Board
Two monitors are required to use the Polycom UC Board. The second monitor can be either a projector used
with a whiteboard, or a monitor.
To set up two monitors and configure to show content:
1 To configure monitor 1, go to System > Admin Settings > Monitors. On the monitor 1 screen,
enable Display Near Video and Display Far Video.
2 To configure monitor 2:
a Advance to the Monitor 2 screen and set Resolution to either 720p or 1080p.
b Enable Display Content to show shared content and Polycom UC Board annotations.
To improve performance, configure your monitor or projector to use Game Mode, if that setting is available.
Here are a few installation tips:
● Polycom recommends LED backlit, LCD displays over CFL LCD displays.
● Do not use plasma backlit displays.
● The UC Board hardware sensor and pen are designed for cold surfaces, such as white boards with
projectors.
● Mount the hardware sensor on the top of the display device. Room lights can interfere with the sensor
when it is mounted on the bottom of the display.
● The UC Board sensor supports one stylus at a time. It does not support using two styluses
simultaneously.
For more information on setting up and using the UC Board, refer to the Quick Start Guide for the Polycom
UC Board, available with the UC Board hardware and at support.polycom.com.
Configure Closed Captioning
You can provide real-time text transcriptions or language translations of the video conference by displaying
closed captions on your system. When you provide captions for a conference, the captioner may be present,
Polycom, Inc.
99
Content
or may use a telephone or web browser to listen to the conference audio. When the captioner sends a unit
of text, all sites see it on the main monitor for 15 seconds. The text then disappears automatically.
Closed captions are supported between RealPresence Group systems with software version 4.1.3 or later,
including a RealPresence Group system hosting a multipoint call, HDX systems with any software version,
and Polycom VSX® systems with software version 7.0 or later.
Captions may be provided in any language that uses the Latin alphabet.
Depending on the capabilities of the system, the captioner may enter caption text using one of the following
methods:
● Remotely, through a dial-up connection to the system’s serial RS-232 port
● In the room using equipment connected directly to the serial port
● In the room or remotely, using the RealPresence Group system web interface
Through a Dial-Up Connection to the System’s RS-232 Serial Port
Closed captioners can provide captions from inside the conference room, or from a remote location, via a
dial-up connection to the serial port of the Polycom RealPresence Group system, as shown in the following
diagram.
Closed captioning through a dial-up connection
Ref.
Number
Description
1
Stenograph machine
2
PC with computer-aided transcription software
3
Modem
4
Phone line
Polycom, Inc.
100
Content
Ref.
Number
Description
5
Modem
6
RealPresence Group System
7
RS-232 serial port
To supply closed captions through a dial-up connection:
1 Ensure that the computer and the RealPresence Group system are configured to use the same
baud rate and parity settings.
2 In the web interface, go to Admin Settings > General Settings > Serial Ports.
3 Set the RS-232 Mode to Closed Caption.
4 Establish a dial-up connection between the computer and the RealPresence Group system.
a Connect a null modem adapter to the RS-232 serial port.
b Connect an RS-232 cable to the modem and to the null modem adapter.
c Connect the modem to a phone line.
d Configure the modem for 8 bits, no parity.
You may need to configure the modem to answer automatically. You may also need to configure
it to ignore DTR signals.
5 On the computer, start the transcription application.
6 Enter text using the stenographic machine connected to the computer.
7 To stop sending closed captions, close the transcription application.
Through the Serial RS-232 Port
Closed captioners can provide captions from inside the conference room, using equipment connected
directly to the serial port of the Polycom RealPresence Group system, as shown in the following diagram.
Closed captioning through the system serial RS-232 port
Ref.
Number
Description
1
Stenographer machine
2
PC with computer-aided transcription software
Polycom, Inc.
101
Content
Ref.
Number
Description
3
RealPresence Group System
4
RS-232 serial port
To supply closed captions using equipment connected directly to the serial port:
1 Ensure that the computer and the RealPresence Group system are configured to use the same
baud rate and parity settings.
2 In the web interface, go to Admin Settings > General Settings > Serial Ports.
3 Set the RS-232 mode to Closed Caption.
4 On the computer, start the transcription application.
5 Enter text using the stenographic machine connected to the computer.
6 To stop sending closed captions, close the transcription application.
Through the Web Interface
Closed captioners can provide captions from inside the conference room, or from a remote location, by
entering the captions directly into the Polycom RealPresence Group system web interface, as shown in the
following diagram.
Closed captioning through the web interface
Ref.
Number
Description
1
Web interface
2
LAN
3
RealPresence Group System
4
LAN port
To supply closed captions for a conference using the web interface:
1 In your web browser address line, enter the RealPresence Group system IP address.
2 Go to Utilities > Tools > Closed Caption.
Polycom, Inc.
102
Content
3 Log in using this information if prompted:
User Name: Your name.
Password: Meeting password defined for your video conferencing system.
4 In the Closed Caption screen, type the caption text into the text field. Text wraps to the next line after
32 characters.
5 Press Send to send the text to the sites in the conference.
Polycom, Inc.
103
Place and Answer Calls
Before you start using the system, configure your system and call settings. System Settings screens provide
access to high-level options for the entire system. For convenience, some of the User Settings options are
repeated on these screens.
To get started with calling, see these topics:
● Configure Call Settings
● Multipoint Calling
● Manage Directories in the Web Interface
● Use the Web Interface Place a Call Page
● Stop and Start Video in a Call
● Place Calls in Kiosk Mode
Configure Call Settings
The call settings screen allows you to determine which settings are available to users when they place and
answer calls in both the web interface and the local interface.
To configure call settings:
1 In the web interface, go to Admin Settings > General Settings > System Settings > Call
Settings.
2 Configure the settings in the following table and save your changes.
Polycom, Inc.
104
Place and Answer Calls
Setting
Description
Maximum Time in Call
Enter the maximum number of hours allowed for call length.
When that time has expired, you see a message asking you if you want to hang up or
stay in the call. If you do not answer within one minute, the call automatically
disconnects. If you choose to stay in the call at this time, you will not be prompted
again.
Selecting Off removes any limit.
This setting also applies when you are viewing the Near video screen or showing
content, even if you are not in a call. If the maximum time is reached while viewing Near
video, the system automatically returns to the Home screen. If content is being shown,
the content stops.
Auto Answer
Point-to-Point Video
Sets the answer mode for when the system is not in a call. This setting has three
choices:
Yes—Instructs the system to automatically answer the incoming point-to-point call.
No—Instructs the system to force manual answering of the incoming call.
Do Not Disturb—Instructs the system to reject the incoming call with no notification to
the user.
Auto Answer Multipoint
Video
Sets the answer mode for when the system is already in a call, regardless of whether
the system has multipoint capability. This setting has three choices:
Yes—Instructs the system to automatically answer the incoming multipoint call.
No—Instructs the system to force manual answering of the incoming call.
Do Not Disturb—Instructs the system to reject the incoming call with no notification to
the user.
Multipoint Mode
Sets the multipoint viewing mode that applies when the RealPresence Group system is
the host of a multipoint call. The available settings are as follows:
Auto
Full Screen
Discussion
Presentation
For detailed information on these settings, refer to Select a Multipoint Viewing Mode.
Display Icons in a Call
Specifies whether to display all on-screen graphics, including icons and help text,
during calls.
Enable Flashing
Incoming Call
Notification
Specifies whether the incoming call notification flashes.
Preferred ‘Place a Call’
Navigation
Specifies the default icons that display on the local interface of the Place a Call screen.
The available settings are as follows:
Dial Pad—Displays a list of recently dialed numbers and a dial pad for entering a
number to call.
Contacts—Displays a screen for searching the entire global network directory. The
multi-tiered directory (LDAP) root entry displays at the top of the Contacts list. The
Contact list combines your search and favorite entries.
Recent Calls—Lists phone numbers, in chronological order, that have been dialed
from the RealPresence Group system.
Polycom, Inc.
105
Place and Answer Calls
Set the Call Answering Mode
You have several choices when it comes to how calls are answered.
To set the call answering mode:
1 In the web interface, go to Admin Settings > General Settings > System Settings > Call
Settings.
2 Select Auto Answer Point-to-Point Video to set the answer mode for calls with one site, or select
Auto Answer Multipoint Video to set the mode for calls with two or more other sites, and then
select one of the following:
 Yes–Answers calls automatically.
 No–Enables you to answer calls manually.
 Do Not Disturb–Disables incoming calls from being processed.
Enable Flashing Incoming Call Alerts
For hearing-impaired users, an attention-getting message displays when an incoming call is received by a
RealPresence Group system. When a call is received, the system displays a message asking if the user
wants to answer the call.
For greater visibility, you can have the message text flash between white and yellow. Flashing text is off by
default. The incoming call alert settings persists after powering the system off and on.
If a RealPresence Group system is paired with a Polycom Touch Control and is configured with Admin
Settings > General Settings > System Settings > Call Settings > Auto Answer Point-to-Point set to
Yes, users do not see the flashing message on the RealPresence Group system or on the Touch Control
screen. The call is answered automatically and users interact with the call on the Touch Control screen.
To turn on flashing alerts:
1 In the web interface, select Admin Settings > General Settings > System Settings > Call
Settings.
2 Select the Enable Flashing Incoming Call Notification checkbox.
To turn off flashing alerts:
1 In the web interface, select Admin Settings > General Settings > System Settings > Call
Settings.
2 Select the Enable Flashing Incoming Call Notification checkbox.
Multipoint Calling
You can use your Polycom RealPresence Group system to participate in multipoint conferences. Multipoint
conferences include multiple video sites and can also include H.323 audio-only or SIP audio-only sites. All
H.323 audio-only and SIP audio-only connections count toward the number of sites in a call. Multipoint calls
require a multipoint conferencing unit (MCU) or a hosting system. Depending on the system’s configuration,
Polycom RealPresence Group systems can host multipoint calls.
Polycom, Inc.
106
Place and Answer Calls
Note: Multipoint Video Conferencing option key code required
You cannot configure multipoint calls without purchasing and installing a Multipoint Video
Conferencing option key code.
Enter a Multipoint Option Key
Depending on your Polycom RealPresence Group system model, you might need to enter a multipoint
option key to enable multipoint calling. For information about purchasing a multipoint call option, please
contact your Polycom distributor.
To enter the multipoint option key:
1 In the web interface, go to Admin Settings > General Settings > Options.
2 In the Key field, enter the Multipoint Video Conferencing option key.
3 Click Save.
Note: RealPresence Group 300 and 310 do not support multipoint calling
The multipoint option key cannot be used with Polycom RealPresence Group 300 and 310 systems.
Select a Multipoint Viewing Mode
What the far-end site sees during a multipoint call can vary depending on how the RealPresence Group
system is configured, the number of sites participating, the number of monitors being used, and whether
content is shared. When you change a layout, you are changing the far-end site layouts only.
To select a multipoint viewing mode:
1 In the web interface, select Admin Settings > General Settings > System Settings > Call
Settings.
2 Select a viewing mode from the Multipoint Mode list.
The following table describes the available multipoint viewing modes.
Multipoint Viewing Modes
Setting
Description
Video images from multiple sites can be automatically combined on one monitor in a display known as continuous
presence.
Auto
The view switches between continuous presence and full screen, depending
on the interaction between the sites.
If multiple sites are talking at the same time, continuous presence is used. If
one site speaks uninterrupted for at least 15 seconds, that site appears in
full screen on the monitor.
Discussion
Multiple sites are displayed in continuous presence. The current speaker’s
image is highlighted.
Polycom, Inc.
107
Place and Answer Calls
Multipoint Viewing Modes
Setting
Description
Presentation
The speaker sees continuous presence while the other sites see the
speaker in full screen on the monitor.
Full Screen
The site that is speaking is shown in full screen to all other sites. The current
speaker sees the previous speaker.
The RealPresence Group systems support several multipoint layouts, as well as dual-monitor compositing.
When you use two monitors of equal size, you have the capability of up to eight-way multipoint calling,
depending on your system configuration. When sharing content, one monitor is always be used for content
and one for people, but the configuration varies, depending on whether you have enabled Self View and
how many people are participating. When you do not share content, the configuration for both monitors is
spread over both monitors, again depending on whether Self View is enabled and how many participants
are in the call.
Include an Additional Audio Call
When your multipoint conference call hits the maximum number of calls allowed for your license type, you
can initiate one additional outbound, audio-only call from your RealPresence Group system. However,
incoming calls are rejected for as long as you are at the call limit for your system.
Keep in mind the following points:
● When the multipoint option is disabled, or if you are making a TIP-enabled call, the RealPresence
Group system supports one video call and one audio-only call.
● Audio-only calls can be encrypted and unencrypted independently from video calls.
Note: Audio call limits
After you reach the call limit and make an audio-only call, if you hang up a video call and try to make
another call, the call will still be an audio-only call.
Enable and Disable Audio Add In
Audio Add-In feature is the default behavior. You can disable and enable it in the web interface.
To disable Audio Add In:
» Go to Admin Settings > Dialing Preference > Dialing Options and clear the Enable Audio Add In
checkbox. Click Save.
To enable Audio Add In:
» Go to Admin Settings > Dialing Preference > Dialing Options > select Enable Audio Add In. Click
Save.
Polycom, Inc.
108
Place and Answer Calls
Include Multiple Sites in a Cascaded Call
You can include multiple sites in a cascaded call if the sites you call have internal multipoint capability. The
following diagram shows how to do this.
Cascaded call with multiple sites
To place a cascaded call:
1 Create and call a group in the directory, or place calls one at a time to several other sites.
2 Ask each far site to call additional sites. Along with these additional sites, each far site in the original
multipoint call can add one audio-only connection.
Keep the following points in mind regarding cascaded calls:
● H.239 is not supported in cascaded calls.
● Cascaded multipoint is not supported in SIP calls.
● HD and SD multipoint are not supported when the Polycom RealPresence Group system hosts a
cascaded call.
● You cannot change the near-end layout.
● The encryption padlock icon might not accurately indicate whether a cascaded call is encrypted.
Manage Directories in the Web Interface
Having groups in the directory can help users find calling information quickly and easily. Polycom
RealPresence Group systems support global groups and Favorites groups.
Polycom RealPresence Group systems support up to 2,000 favorite contacts that users create within
Favorites. They can also support one of the following:
Polycom, Inc.
109
Place and Answer Calls
● Up to 200 additional contacts with presence, which appear in Favorites, when registered with
Microsoft Lync Server 2010 or 2013.
● Up to 200 additional contacts with presence, which appear in Favorites, when registered with
Polycom CMA.
● Up to 4,000 contacts from a Polycom GDS server.
● An unlimited number of contacts when the RealPresence Group system is registered with Microsoft
Lync Server 2010 or 2013.
Polycom RealPresence Group systems support up to 200 Favorites groups that users create within
Favorites. If the system is connected to a global directory server, it can also support one of the following:
● Up to 64 additional groups from the Microsoft Lync Server, which appear in the Favorites group.
● Up to 200 additional distribution groups from Polycom CMA, which appear in the Global Directory
group.
Note: Microsoft integration requires Professional Services
Professional Services for Microsoft integration is mandatory for Microsoft Lync Server 2010 or 2013
integrations. For additional information and details please refer to
http://www.polycom.com/services/professional_services/index.html or contact your local Polycom
representative.
Browse Global Directory Entries
Global directory entries are assigned to a default global Favorites group named Global Entry. The global
directory contains address book entries downloaded from an enabled global directory server.You can scroll
through the global directory to view a list of all global directory entries and select contacts in the global
directory to call. Up to 200 search results can be displayed at a time from a Polycom Global Directory
Service (GDS), Microsoft Lync, or Lightweight Directory Access Protocol (LDAP) global directory.
The global directory browsing feature does not support directory servers that are unable to store contents
locally on RealPresence Group systems, including Microsoft Lync in Web Query mode.
To browse the global directory using the web interface:
1 In the web interface, select Place a Call > Global Entry.
2 Scroll through the global directory entries and select Call to place a call or select an entry to view
the contact’s information.
Note: Browsing the LDAP directory
In order to browse LDAP global directory entries, LDAP must be enabled through Polycom
RealPresence Resource Manager. If LDAP is not enabled through RealPresence Resource Manager,
you can still search the global directory, but you cannot browse the global directory.
Manage Favorites
Local interface users can select Contacts from the menu to view favorites and the directory.
Web interface users can add favorites from the directory, create new favorite contacts, and create favorite
groups. You perform the following tasks on the Place a Call > Manage Favorites screen.
Polycom, Inc.
110
Place and Answer Calls
To create a new Favorites contact:
1 To create a favorite contact not in the directory list, click Create New Favorite.
2 Enter the contact call information and click Save.
To create a Favorites group:
1 Click Create New Group.
2 Enter a Name for the group and click Save.
A success message is displayed.
3 To add contacts to the group, click Add Contacts on the success message.
4 Enter a contact name in the search box and click Search.
5 In the entry you want to add to the group, click Add.
6 Repeat the above steps to add more contacts to the group.
7 Click Done.
To edit a Favorites group:
1 Find the group name in the list of contacts.
2 Next to the group contact name, click Edit Group.
Do one of the following:
 To add contacts to the group, click Add From Directory, enter a contact name, click Search, and
then Add to add a contact.
 To remove contacts from the group, select a contact name and click Remove.
3 Repeat the above steps to continue adding or removing contacts.
4 Click Done.
To delete a Favorites contact or group:
1 In the search box, type a contact name and click Search.
2 In the contact name you want to delete, click Delete.
Import and Export Favorites
The Import/Export Directory feature enables you to download Favorites from a RealPresence Group
system to local devices, such as computers and tablets, in XML file format. It also allows you to upload
Favorites from a device to a RealPresence Group system.
To access these features, you must be able to access a web browser on your device. Polycom
recommends you use one of the following web browsers:
● Microsoft Internet Explorer
● Mozilla Firefox
Keep the following points in mind when performing these tasks:
● The size of the uploaded XML file cannot exceed 3 megabytes.
Polycom, Inc.
111
Place and Answer Calls
● You can import favorites groups and entries both when you are in a call and when you are not in a
call on the RealPresence Group system.
● When the uploaded XML file includes favorites groups or entries already on your RealPresence
Group system, the duplicate files will be added as separate directory entries.
To export Favorites groups and contacts:
1 In the web interface, go to Manage Favorites > Import/Export > Download.
2 Save the downloaded directory.xml file on your local device.
You can export Favorites groups and entries both when you are in a call and when you are not in a call on the
RealPresence Group system
To import Favorites groups and contacts:
1 In the web interface go to Manage Favorites > Import/Export > Choose File.
2 In the dialog box select the directory.xml file you want to import and click Open.
3 Select Upload to upload the directory.xml file to the RealPresence Group system.
Types of Favorites Contacts
Favorites contains the types of Contacts shown in the following table.
Directory Server
Registration
Types of Contacts
Presence State Displayed
Polycom GDS
•
Directory entries created locally by the user.
Unknown
•
References to Polycom GDS entries added to
Favorites by the user.
These entries are available only if the system
is successfully registered with Polycom GDS.
Users can delete these entries from
Favorites. Users can copy these entries to
other Favorites and remove them from those
groups. Users cannot edit these entries.
Online/Offline
•
•
Directory entries created locally by the user
References to LDAP directory entries added to
Favorites by the user.
These entries are available only if the system
can successfully access the LDAP/Active
Directory server. Users can delete these
entries from Favorites. Users can copy these
entries to other Favorites and remove them
from those groups. Users cannot edit these
entries.
Unknown
LDAP with H.350 or Active
Directory
Polycom, Inc.
112
Place and Answer Calls
Directory Server
Registration
Types of Contacts
Presence State Displayed
LDAP by a Polycom CMA
System
•
•
Directory entries created locally by the user.
References to LDAP directory entries added to
Favorites by the user.
These entries are available only if the system
can successfully access Polycom CMA.
Users can delete these entries from
Favorites. Users can copy these entries to
other Favorites and remove them from those
groups. Users cannot edit these entries.
Unknown
•
LDAP directory entries saved as Favorites by
the user and stored with the presence service.
Users can delete these entries from
Favorites. Users can copy these entries to
other Favorites and remove them from those
groups. Users cannot edit these entries.
Real-time presence
•
Microsoft Lync Server directory entries saved
as Contacts by the user in Office
Communicator and stored on the Microsoft
Lync Server.
Users must create their contact lists using
Microsoft Office Communicator on a
computer. Users cannot edit or delete these
entries from Favorites using the Polycom
RealPresence Group system. Users can copy
these entries to other Favorites and remove
them from those groups.
Real-time presence
Microsoft
Connect to Microsoft Exchange Server Calendaring Service
Polycom RealPresence Group systems can connect to Microsoft Exchange Server 2010 or 2013 and
retrieve calendar information. Connecting to a calendaring service allows the system to:
● Display the day’s scheduled meetings, along with details about each.
● Hide or show details about meetings marked Private, depending on the configuration of the system.
● Display a meeting reminder before each scheduled meeting, along with a reminder tone.
If the meeting was created using the Polycom Conferencing Add-In for Microsoft Outlook, the RealPresence
Group system can for the following:
● Identify video-enabled meetings with a
icon displayed on the system calendar.
● Let users join the meeting without knowing the connection details.
Note: Microsoft integration requires Professional Services
Professional Services for Microsoft integration is mandatory for Polycom Conferencing for Microsoft
Outlook and Microsoft Office Communications Server integrations. For additional information and
details please refer to http://www.polycom.com/services/professional_services/index.html or contact
your local Polycom representative.
Polycom, Inc.
113
Place and Answer Calls
To configure the Calendaring Service:
1 In the web interface, go to Admin Settings > Servers > Calendaring Service.
2 Configure these settings.
Setting
Description
Enable Calendaring
Service
Enables the system to connect to the Microsoft Exchange Server 2010 or 2013 or
and retrieve calendar information.
Microsoft Exchange
Server
Specifies the Fully Qualified Domain Name (FQDN) of the Microsoft Exchange
Client Access Server. If your organization has multiple Client Access Servers
behind a network load balancer, this is the FQDN of the server’s Virtual IP Address.
If required, an IP address can be used instead of an FQDN, but Polycom
recommends using the same FQDN that is used for Outlook clients.
Secure Connection
Protocol
Specifies the connection protocol to use to connect to the server. Select Automatic
or TLS 1.0.
Domain
Specifies the domain for registering to the Microsoft Exchange Server 2010 or
2013, in either NETBIOS or DNS notation, for example, either company.local or
COMPANY.
User Name
Specifies the user name for registering to the Microsoft Exchange Server 2010 or
2013, with no domain information included. This can be the system name or an
individual’s name.
Password
Specifies the system password for registering with the Microsoft Exchange Server
2010 or 2013. This can be the system password or an individual’s password.
Email
Specifies the Outlook mailbox this system should monitor for calendar information.
This should match the Primary SMTP Address for the account in Microsoft
Exchange Server 2010 or 2013, which is displayed as the value of the mail attribute
in the account properties.
Meeting Reminder Time in
Minutes
Specifies the number of minutes before the meeting that a reminder will display on
the system.
Play Reminder Tone When
Not in a Call
Specifies whether to play a sound along with the text reminder when the system is
not in a call.
Show Information for
Meetings Set to Private
Specifies whether to display details about meetings marked private.
Call from the Calendar
If your RealPresence Group system is configured to connect to the Microsoft Exchange Server, and the
Polycom Conferencing for Microsoft Outlook add-in is installed at your site, you can join a scheduled
meeting from the Calendar screen. If the home screen does not display calendar information, the system is
not registered with the Microsoft Exchange Server. If no meetings are scheduled, a “No Meetings Today”
message is displayed.
To join a scheduled meeting from the Home screen:
1 With your remote, select a meeting on the Home screen.
Polycom, Inc.
114
Place and Answer Calls
2 Select Join to call into the meeting. If Join is not displayed, you must get and install the Polycom
Conferencing Add-In for Microsoft Outlook.
For information about displaying the Calendar button on the Home screen, refer to Customize the Local
Interface Home Screen. For more information about using Polycom Conferencing for Microsoft Outlook,
refer to the User Guide for the Polycom RealPresence Group Series. For more information about setting up
Microsoft Exchange Server 2010 or 2013 accounts to use the calendaring service, refer to the Polycom
Unified Communications Deployment Guide for Microsoft Environments available on the Polycom website.
Use the Web Interface Place a Call Page
When you click the Place a Call link on the web interface, the default view shows you the following widgets:
● Search
● Place a Call
● Contacts
● Manual Dial
● Speed Dial
● Recent Calls
● Support Documents
For information on configuring Home screen settings for the local interface, refer to Customize the Local
Interface Home Screen.
Search
In a text box just under the IP Address bar on the web interface Place a Call page, you can enter a search
term to receive a list of RealPresence Group system web pages. For instance, if you type Call, the system
generates a list of pages that match your search term, such as Call Settings, Recent Calls, and Time in
Call. Select any of the choices to go directly to that page of the web interface.
Place a Call
In the Place a Call area, you can place a call by searching your contacts or manually:
To call a favorite contact:
1 In the Contacts section, enter a name and click Search.
2 Select a contact name and click Call.
For information about editing Favorites contacts, refer to Manage Favorites.
To place a call manually:
1 Click Manual Dial.
2 Enter the number.
3 Click Call.
Polycom, Inc.
115
Place and Answer Calls
The call is placed according to the default settings you selected in Admin Settings > Network > Dialing
Preferences. You can select settings other than the defaults in the two lists below the text entry field.
To require a password, select Meeting Password and enter a password in the field that displays below the
check box.
Speed Dial
On the web interface Place a Call page, you can call Speed Dial contacts and can edit the Speed Dial
contact list.
To call speed dial contacts:
» In the Speed Dial section, select a contact from the list and click Call.
To add speed dial contacts:
1 In the Speed Dial section, click Edit.
2 Enter a contact name and click Search.
3 In the contact you want to add, click Add.
4 To save your changes, click Done.
To remove speed dial contacts:
1 In the Speed Dial section, click Edit.
2 In the contact you want to delete, click Remove.
3 To save your changes, click Done.
Recent Calls
On the web interface Place a Call page, you can place calls to Recent Call contacts.
You can also configure a Recent Calls list to display on the RealPresence Group system Place a Call screen
on the web interface and Home screen on the local interface. The list includes the following information:
● Site name or number
● Whether call was placed or received
● Date and time
To dial a recent call from the web interface:
» On the web interface Place a Call page’s Recent Calls section, do one of the following:
 Find an entry and click the Call link next to the entry.
 Click More to view a list of calls with more details, then select an entry and click Call.
To configure Recent Calls in the web interface:
1 Go to Admin Settings > General Settings > System Settings > Recent Calls.
Polycom, Inc.
116
Place and Answer Calls
2 To enable a Recent Calls list, configure these settings.
Setting
Description
Call Detail Report
Specifies whether to collect call data for the Call Detail Report. When selected,
information about calls can be viewed through the Polycom RealPresence Group
system web interface and downloaded as a .csv file. When this setting is not
selected, the system stops writing calls to the report.
Enable Recent Calls
Specifies whether to show Recent Calls on the local and web interfaces.
Maximum Number to
Display
Specifies the maximum number of calls to display in the Recent Calls list.
3 To start a new list of recent calls, click Clear Recent Calls.
4 Click Save.
If you need more details about calls, view or download the Call Detail Report (CDR) from the Polycom
RealPresence Group system web interface. For more information about the CDR, refer to Call Detail Report
(CDR).
Support Documents
You can easily access support documents from the web interface.
Stop and Start Video in a Call
You can stop your near-end site video while in a call. Using the local interface, you can also stop your
near-end site video before a call begins. You can then start your video again at any time.
Stopping your video allows you to stop sending your near-end, camera-encoded video while still remaining
connected to the conference. When your video is stopped, the far-end site does not see near-end video
transmission from you.
When your video is stopped in non-Lync environments, a video pause image is sent to the far-end site. In
Lync environments, video transmission stops, and no Self View is displayed when your video is stopped.
Stopping your video does not affect the sending or receiving of content.
To stop video from the web interface in a call:
» Select Stop Video from the call menu at the top of the screen.
When you stop the video, a video pause icon appears on the display.
To start video from the web interface in a call:
» Select Start Video from the call menu at the top of the screen.
When you start the video, the video pause icon disappears from the display.
For information on stopping and starting video from the local interface, refer to User Guide for the Polycom
RealPresence Group Series.
Polycom, Inc.
117
Place and Answer Calls
Place Calls in Kiosk Mode
In the local interface, Kiosk Mode simplifies the Home screen by displaying only speed dial entries and
calendar meetings (if enabled). In Kiosk Mode, therefore, you can call speed dial numbers, join calendar
meetings, and answer calls.
You must create your speed dial numbers before you use Kiosk Mode.
Kiosk Mode is disabled by default. If Kiosk Mode is enabled, these conditions apply:
● The Home screen menu, Out of Call menu, and other icons are disabled.
● Alerts bring the local interface out of Kiosk Mode until you clear the alerts.
● You can still use the remote to adjust the volume, control the camera, and mute/unmute the
microphone when in calls.
● You can bring up the In a Call menu by pressing Menu on the remote during the call.
To enable Kiosk Mode:
1 In the web interface, go to Manage Favorites > Create Favorite and create one or more Favorites.
2 On the web interface Place a Call screen, select Edit next to Speed Dial, then search for and add
Favorites to Speed Dial.
3 Go to Admin Settings > General Settings > Home Screen Settings > Speed Dial.
4 Select Enable Speed Dial and then click Save.
5 Go to Kiosk Mode, then select Enable Kiosk Mode and click Save.
For information on using Kiosk Mode, refer to the User Guide for the Polycom RealPresence Group Series
and the Polycom Touch Control.
Polycom, Inc.
118
Security
To configure your RealPresence Group system security settings using the system web interface, use one
of the following browsers with cookies enabled:
● Microsoft Internet Explorer version 9 or 10
● Mozilla Firefox 22
● Apple Safari 6.0.5
For detailed security information, see the following topics:
● Configure Security Profiles
● Manage System Access
● Enable a Whitelist and Add IP Addresses
● Enable Visual Security Classification
● Manage Certificates and Revocation
● Set Up Security Banners
● Configure a Meeting Password
To go to the web interface:
» Open a web browser and enter the IP address of the RealPresence Group system using the
https://IPaddress (for example, https://10.11.12.13).
For more information about using the web interface, refer to Access the Web Interface.
Caution: HTTP redirects to HTTPS
The HTTPS protocol ensures that the configuration of all login information (such as user names and
passwords) is transmitted using an encrypted channel, including those user names and passwords
used to communicate with third-party systems on your network. Using HTTPS severely limits the
ability of anyone on the network to discover these credentials. For this reason, all attempts to use the
RealPresence Group Series web interface via HTTP are redirected to the HTTPS interface.
You can find security options and passwords in this part of the interface:
● In the local interface, go to Settings > Administration > Security.
The local interface has general, password, and remote access settings.
● In the web interface, go to Admin Settings > Security.
The web interface has global and local settings.
Settings are under different sections of the security interfaces. Not all systems show all of the options, and
many settings in the web interface are unavailable in the local interface.
Polycom, Inc.
119
Security
Note: Security options by country
In accordance with local laws and regulations not all security options are available in all countries.
Configure Security Profiles
RealPresence Group system security profiles provide varying levels of secure access to your RealPresence
Group system. The security profile your RealPresence Group system uses provides the basis for secure
access within the system and determines how users can operate the system.
The security profile is selected during system setup with the setup wizard, but this setting is configurable
through the web interface Admin Settings. The default values and ability to change some RealPresence
Group settings are affected by which security profile your system uses. Refer to the tables in Security Profile
Default Settings to see how these settings are affected for each security profile.
Consider each security profile as a set of default values for all configuration settings that affect product
security and that achieves some level of base product security. You can choose from four
profiles—Maximum, High, Medium and Low. Each profile provides a basic security posture, ranging from
the most secure to the least secure, which allows you to select a level of security that is appropriate for the
deployment of the system in your environment.
Because you can change most of the individual configuration settings regardless of the security profile you
chose, Polycom recommends that you select the profile that is closest to the level of security you want in
your environment and then customize the settings from there, as needed. In the higher profiles, however,
some settings are either not changeable at all or have restricted ranges of values. For specific configuration
information, refer to each profile’s settings in Security Profile Default Settings.
To view or change a security profile:
1 In the web interface, go to Admin Settings > Security > Global Security.
2 Determine which of the following Security Profile settings your system uses.
Setting
Description
Maximum
Configures the system to be compliant with U.S. DoD security requirements. Some configuration
settings are made read-only in this profile; other settings have restricted ranges of values. This
profile represents the highest level of security.
High
Configures the system with most security controls enabled, but does not mandate the use of some
controls that are mandated in Maximum profile. Some configuration settings are not changeable in
this profile; other settings have restricted ranges of values. This profile is most appropriate for
enterprise deployments that demand high security.
Medium
Configures the system with some of the basic security controls enabled, but not all. Most settings
are changeable in this profile.
Low
Configures the system with no mandated security controls, although all controls can be enabled as
needed. This is the default profile.
3 To change the profile setting, select the Security Profile you want to use.
You can increase or decrease the level of security.
4 Follow the prompts in the Security Profile Change wizard.
Polycom, Inc.
120
Security
Manage System Access
Managing access to the RealPresence Group system is essential for security. This section includes the
following topics:
● External Authentication
● Login and Credentials
● Secure API Access
● Configure Admin ID and Password for the Polycom Touch Control
● Local Accounts
External Authentication
Polycom RealPresence Group systems support two roles for accessing the system, an admin role and a
user role. Admins can perform administrator activities such as changing configuration, as well as user
activities such as placing and answering calls. Users can perform only user-type activities.
Polycom RealPresence Group systems provide two local accounts, one for the user role (by default named
user) and one for the admin role (by default named admin). The IDs and passwords for these local
accounts are stored on the RealPresence Group system itself.
An administrator can configure RealPresence Group systems to grant access using network accounts that
are authenticated through an Active Directory (AD) server such as the Microsoft Active Directory server. In
this case, the account information is stored on the AD server and not on the RealPresence Group system.
The AD administrator assigns accounts to AD groups, one for RealPresence Group system admin access
and one for user access. For this reason, external authentication is also referred to as Active Directory
authentication.
The RealPresence Group system administrator configures the external authentication settings on the
RealPresence Group system to specify the address of an AD Server for authenticating user logins, AD
group for user access, and AD group for admin access on the RealPresence Group system. The
RealPresence Group system can map only one Active Directory group to a given role.
Users can enter their network account credentials to access the system on the following interfaces:
● Web interface (admin access only)
● Local interface (user and admin role accounts when Require Login for System Access is
enabled; admin accounts when admin-only areas of the local interface are accessed)
Note: Active Directory Server with PKI
When External Authentication is enabled in PKI environments where Always Validate Peer
Certificates from Server is enabled on the RealPresence Group system, configure the Active
Directory Server Address on the system using the address information that is in the Active Directory
Server identity certificate. This allows the RealPresence Group system to validate the identity
certificate.
As an example, if the Active Directory Server identity certificate contains its DNS name only, and no
specific IP address, configuring the Active Directory Server Address on the RealPresence Group
system using the server’s IP address results in certificate validation failure, and consequently
authentication failure. The RealPresence Group system configuration would have to specify the
server by DNS name, in this case, to successfully match the server certificate data.
Polycom, Inc.
121
Security
RealPresence Group systems support Active Directory on Microsoft Windows Server version 2008 R2 and
Microsoft Windows Server 2012.
Note: Local user account can be disabled
The RealPresence Group system local user account is disabled when Enable Active Directory
External Authentication is enabled. The admin account is active and usable, however.
To enable external authentication:
1 In the web interface, go to Admin Settings > Security > Global Security > Authentication.
2 Configure these settings on the Authentication page, then click Save.
Setting
Description
Enable Active Directory External
Authentication
Specifies whether to authenticate users through the Active Directory
server. When Active Directory authentication is enabled, users are
allowed to log in with their network account credentials, using this
format:
domain\user
With this format, users can have accounts on multiple domains.
Active Directory Server Address
Specifies the DNS fully qualified domain name (FQDN) or IP address
of the Active Directory server (ADS). If you are using subdomains,
append port number 3268 as follows:
ad.domain.com:3268
Note: RealPresence Group systems can use the RealPresence
Resource Manager system as an ADS. If one is deployed in your
environment, enter its address here. Otherwise, enter the address of
an ADS.
Active Directory Admin Group
Specifies the Active Directory group whose members should have
admin access to the RealPresence Group system. This name must
exactly match the name in the ADS for authentication to succeed.
Active Directory User Group
Specifies the Active Directory group whose members should have
user access to the RealPresence Group system. This name must
exactly match the name in the ADS for authentication to succeed.
If external authentication is not active after completing these steps, go to Admin Settings > Network > LAN Properties
> LAN Options and ensure that the Domain Name setting contains the name of your Active Directory domain.
Note: Use local admin credentials to pair
You can only use the local Polycom RealPresence Group system admin credentials to pair the
system with a Touch Control.
Login and Credentials
Login credentials are user IDs and passwords that identify the user and define the user’s ability to access
the Polycom RealPresence Group system. You can configure both local and remote access for users.
Polycom, Inc.
122
Security
Local Access
Local access means using a RealPresence Group system through the local interface.
To configure local access to the system:
1 Do one of the following:
 In the local interface, go to Settings > Administration > Security > Passwords.
 In the web interface, go to Admin Settings > Security > Local Accounts > Login Credentials.
2 Configure the following settings. The order in which the settings are displayed differs between the
interfaces.
Setting
Description
Admin ID
Specifies the ID for the administrator account. The default Admin ID is
admin.
Admin IDs are not case sensitive.
Admin Room Password
Specifies the password for the local administrator account used when logging
in to the system locally.
When this password is set, you must enter it to configure the system Admin
Settings using the remote control. The password cannot contain spaces or
be more than 40 characters. Passwords are case sensitive.
The default Admin Room Password is the 14-digit system serial number from
the System Information screen or the back of the system.
Use Room Password for
Remote Access
Specifies whether the room password used for local login is also used for the
remote login. When this setting is disabled, the remote access password
settings are displayed.
Admin Remote Access
Password
Specifies the password for the local administrator account used when logging
in to the system remotely using the web interface or a telnet session.
When this password is set, you must enter it to update the software or
manage the system from a computer. The password cannot contain spaces
or more than 40 characters.
Require User Login for System
Access
Specifies whether the system automatically prompts users to log in when the
system comes out of sleep mode or completes the startup process. Enabling
this setting requires a login to use the local interface.
You can enable this setting at any time.
User ID
Specifies the ID for the user account. The default User ID is user.
User IDs are not case sensitive.
User Room Password
Specifies the password for the local user account used when logging in to the
system locally.
The password cannot contain spaces or more than 40 characters.
Passwords are case sensitive.
User Remote Access Password
Specifies the password for the local user account used when logging in to the
system remotely.
The password cannot contain spaces or more than 40 characters.
Passwords are case sensitive.
Polycom, Inc.
123
Security
Note: Enabling Maximum Security Profile requires new ID values
When you configure the RealPresence Group system to use the Maximum Security Profile, the
system forces you to change the following settings from their default values:
• Admin account User Id
• User account User Id
• Admin room password
• Admin remote access password
• User room password
• User remote access password
Remote Access
Remote access means using a RealPresence Group system in some way other than through the local
interface, such as by using the web, a serial port, or telnet. A session is an instance of a user connected to
the system through one of these interfaces. Sessions include an indication of how you are logged on to the
RealPresence Group system, such as the local interface, web interface, telnet, or serial API.
To configure remote access settings:
1 Do one of the following:
 In the local interface, go to Settings > Administration > Security > Remote Access.
 In the web interface, go to Admin Settings > Security > Global Security > Access.
2 Configure the following settings. Not all settings are available on both interfaces. The visibility of
some settings is affected by the type of security profile your system uses.
Setting
Description
Enable Network Intrusion
Detection System (NIDS)
(web interface only)
Activates the ability to log entries to the security log when the system
detects a possible network intrusion. This setting is enabled or disabled by
default based on the security profile, but can be changed.
Enable Web Access
Specifies whether to allow remote access to the system by using the web
interface.
Allow Access to User Settings
Specifies whether the User Settings screen is accessible to users through
the local interface. For more information about user access settings, refer
to Manage User Access to Settings and Features.
Restrict to HTTPS
Specifies that the web server is accessible only over a secure HTTPS port.
Enabling this setting closes the HTTP port and so disables redirects of
sessions from HTTP to HTTPS (all access must be initiated as HTTPS).
Polycom, Inc.
124
Security
Setting
Description
Web Access Port (HTTP)
Specifies the port to use when accessing the system using the Polycom
RealPresence Group system web interface using HTTP.
If you change this from the default (port 80), specify a port number of 1025
or higher, and make sure the port is not already in use. You will need to
include the port number with the IP address when you use the Polycom
RealPresence Group system web interface to access the system. This
makes unauthorized access more difficult.
If Restrict to HTTPS is enabled, the Web Access Port setting is
unavailable.
Enable Telnet Access
Specifies whether to allow remote access to the system by telnet.
Enable SSH Access
Specifies whether to allow SSH access. For more information about this
setting, refer to Secure API Access.
API Port
Specifies the port for API access. Select port 23 or 24.
If you set the API port to port 23, the diagnostics port changes to port 24.
Enable Diagnostics Port Idle
Session Timeout
Specifies whether to allow the diagnostics port to time out at the configured
time interval or not. The timeout setting is set under Idle Session Timeout
in Minutes.
Enable API Port Idle Session
Timeout
Specifies whether to allow the API port to time out at the configured time
interval or not. The timeout setting is set under Idle Session Timeout in
Minutes.
Enable SNMP Access
Specifies whether to allow remote access to the system by SNMP.
Allow Video Display on Web
(local interface only)
Specifies whether you can use the Polycom RealPresence Group system
web interface to view the room where the system is located, or video of
calls in which the system participates.
Note: This feature activates both near site and far site video displays in
Web Director.
Lock Port after Failed Logins
For information about this setting, refer to Port Lockout.
Enable Whitelist
Specifies whether to enable a whitelist. For more information about this
setting, refer to Enable a Whitelist and Add IP Addresses.
Idle Session Timeout in Minutes
(web interface only)
Specifies the number of minutes your web interface session can be idle
before the session times out.
Maximum Number of Active
Sessions
(web interface only)
Specifies the maximum number of users who can be logged in to and using
your system through telnet or the web interface at the same time.
Manage User Access to Settings and Features
You can allow users to change common user preferences by providing access to the User Settings screen.
To allow users to customize the workspace, select the Allow Access to User Settings option to make the
User Settings choice on the Settings screen available to users on the local interface’s Home screen.
Polycom, Inc.
125
Security
If the Polycom RealPresence Group system is paired with a Polycom Touch Control, selecting Allow
Access to User Settings makes the RealPresence Group Series system tab available on the Touch
Control User Settings screen.
User Settings contains the following options, most of which are also available to administrators under Admin
Settings. These settings are not available in the Maximum Security Profile unless otherwise noted.
● Meeting Password (available in the Maximum Security Profile)
● Backlight Compensation (available in the Maximum Security Profile)
● Mute Auto-Answer Calls
● Allow Other Participants in a Call to Control Your Camera
● Auto Answer Point-to-Point Video
● Auto Answer Multipoint Video
● Allow Video Display on Web
Detect Intrusions
The Polycom RealPresence Group system logs an entry to the security log when it detects a possible
network intrusion. This logging is controlled by the setting Admin Settings > Security > Global Security
> Access > Enable Network Intrusion Detection System (NIDS). The security log prefix identifies the
type of packet detected, as shown in the following table.
Prefix
Packet Type
SECURITY: NIDS/unknown_tcp
Packet that attempts to connect or probe a closed TCP port
SECURITY: NIDS/unknown_udp
Packet that probes a closed UDP port
SECURITY: NIDS/invalid_tcp
TCP packet in an invalid state
SECURITY: NIDS/invalid_icmp
ICMP or ICMPv6 packet in an invalid state
SECURITY: NIDS/unknown
Packet with an unknown protocol number in the IP header
SECURITY: NIDS/flood
Stream of ICMP or ICMPv6 ping requests or TCP connections to an opened
TCP port
Following the message prefix, the security log entry includes the timestamp and the IP, TCP, UDP, ICMP, or
ICMPv6 headers. For example, the following security log entry shows an “unknown_udp” intrusion:
2009-05-08 21:32:52 WARNING kernel: SECURITY: NIDS/unknown_udp IN=eth0
OUT= MAC=00:e0:db:08:9a:ff:00:19:aa:da:11:c3:08:00 SRC=172.18.1.80
DST=172.18.1.170 LEN=28 TOS=0x00 PREC=0x00 TTL=63 ID=22458 PROTO=UDP
SPT=1450 DPT=7788 LEN=8
Polycom, Inc.
126
Security
Secure API Access
You can access a Polycom RealPresence Group Series system using the Secure Shell (SSH) protocol.
Secure API access is authenticated for local and Active Directory (AD) accounts.
Note: Empty passwords
When a password is empty, SSH will not validate credentials and allow a user to log in.
Polycom recommends that you consistently use passwords for secure access.
Enable and Disable Secure API Access
Secure API access using SSH is enabled by default. The sshenable API command and Enable SSH
Access web interface option have been added to enable or disable the feature.
To enable SSH for secure API access, do one of the following:
● In the web interface of the RealPresence Group Series system, go to Admin Settings > Security >
Global Security > Access and enable the Enable SSH Access setting.
● In a RealPresence Group Series API session, enter sshenable true.
To disable SSH for secure API access, do one of the following:
● In the web interface of the RealPresence Group Series system, select Admin Settings > Security
> Global Security > Access and disable the Enable SSH Access setting.
● In a RealPresence Group Series API session, enter sshenable false.
Access the API with SSH
To obtain secure access to the API, you must use an SSH client and connect to the IP address configured
for the system on port 22.
Note: Maximum login attempts
The system allows three attempts to enter correct login credentials. The SSH client program
closes after the third failed attempt.
To access the API with SSH:
1 Enable remote access.
2 If necessary, enable external authentication.
3 Enable the SSH feature.
4 Start an SSH session using the Polycom RealPresence Group series system IP address and port
22.
5 When prompted, enter the remote access credentials.
For information on accessing the API, refer to the Polycom RealPresence Group Series Integrator
Reference Guide at support.polycom.com.
Configure Admin ID and Password for the Polycom Touch Control
You can set an admin ID and password, which allows you to limit access to the Polycom Touch Control
Administration settings.
Polycom, Inc.
127
Security
To set a Polycom Touch Control admin ID and password:
1 From the Home screen touch
Administration.
An admin ID and password might be configured for the Touch Control Administration settings. The
default ID is admin and the default password is 456.
2 Touch the Security tab.
3 Set the following security settings.
Setting
Description
Admin ID
Specifies the ID for the administrator account. The default Admin ID is admin.
Admin
Password
Specifies the password for administrator access when logging in to the Touch Control. The default
password is 456.
When this password is set, you must enter it to configure the Touch Control Admin Settings. The
password must not contain spaces.
Local Accounts
For RealPresence Group system accounts, you need to set up password policies and account lockout
settings.
Password Policies
You can configure password policies for Admin, User, Meeting, Remote Access, and SNMP passwords.
These password settings can ensure that strong passwords are used. Polycom strongly recommends that
you create an Admin password for your system.
To configure password policies:
1 In the web interface, go to Admin Settings > Security > Local Accounts > Password
Requirements.
2 Configure the following settings for Admin Room, User Room, Meeting, Remote Access, or
SNMP passwords. Click Save.
Setting
Description
Minimum Length
Specifies the minimum number of characters required for a valid password.
Require Lowercase Letters
Specifies whether a valid password must contain one or more lowercase letters.
Require Uppercase Letters
Specifies whether a valid password must contain one or more uppercase letters.
Require Numbers
Specifies whether a valid password must contain one or more numbers.
Require Special Characters
Specifies whether a valid password must contain one or more special characters.
Supported characters include:
@-_!;$,\/&.#*
Reject Previous Passwords
Specifies the number of most recent passwords that cannot be reused. If set to
Off, all previous passwords can be reused.
Polycom, Inc.
128
Security
Setting
Description
Minimum Password Age in
Days
Specifies the minimum number of days that must pass before the password can
be changed.
Maximum Password Age in
Days
Specifies the maximum number of days that can pass before the password must
be changed.
Note: This setting is unavailable for Meeting and SNMP passwords.
Minimum Changed
Characters
Specifies the number of characters that must be different or change position in a
new password. If this is set to 3, 123abc can change to 345cde but not to
234bcd.
Note: This setting is unavailable for Meeting and SNMP passwords.
Maximum Consecutive
Repeated Characters
Specifies the maximum number of consecutive repeated characters in a valid
password. If this is set to 3, aaa123 is a valid password but aaaa123 is not.
Password Expiration
Warning
Specifies how many days in advance the system displays a warning that the
password will soon expire, if a maximum password age is set.
Note: This setting is unavailable for Meeting and SNMP passwords.
Can Contain ID or Its
Reverse Form
Specifies whether the associated ID or the reverse of the ID can be part of a valid
password. If this setting is enabled and the ID is admin, passwords admin and
nimda are allowed.
Note: This setting is unavailable for Meeting passwords.
Changes to most password policy settings do not take effect until the next time the password is changed.
Changes take effect immediately for Minimum Password Age in Days, Maximum Password Age in
Days, and Password Expiration Warning. Changing Minimum Length from Off to some other value also
takes effect immediately.
Account Lockout
RealPresence Group systems provide access controls that prevent unauthorized use of the system. One
way someone might try to discover valid user names and passwords is by exhaustively attempting to log in,
varying the user name and password data in a programmatic way until discovering a combination that
succeeds. Such a method is called a “brute-force” attack.
To mitigate the risk of such an attack, two access control mechanisms are available on RealPresence Group
systems. The first type of access control, account lockout, protects local accounts from being vulnerable to
brute-force attacks, while the second, port lockout, protects login ports themselves from being vulnerable to
brute-force attacks. For more information about that mechanism, refer to Port Lockout.
Account lockout temporarily locks a local account from accepting logins after a configurable number of
unsuccessful attempts to log in to that account. It protects only the local RealPresence Group system’s
Admin and User local accounts. When external authentication is used, the Active Directory Server protects
Active Directory accounts.
RealPresence Group systems provide separate account lockout controls for each of their local accounts,
which are named Admin and User. The account lock can be invoked due to failed logins on any of the
following login ports:
● Local interface
● Web interface
Polycom, Inc.
129
Security
● Telnet interface
To configure the account lockout feature:
1 In the web interface, go to Admin Settings > Security > Local Accounts > Account Lockout.
2 Configure these settings for the appropriate account on the Account Lockout page, then click Save.
You can configure account lock for the admin account, user account, or both accounts.
Setting
Description
Lock Admin/User Account after
Failed Logins
Specifies the number of failed login attempts allowed before the system
locks the account. If set to Off, the system does not lock the account due
to failed login attempts.
Admin/User Account Lock Duration
Specifies the amount of time that the account remains locked due to failed
login attempts. After this time period has expired, the failed login attempts
counter is reset to zero and logins to the account are once again allowed.
Reset Admin/User Account Lock
Counter After
Specifies the “failed login window” period of time, starting with the first
failed login attempt, during which subsequent failed login attempts will be
counted against the maximum number allowed (Lock Admin/User
Account after Failed Logins). If the number of failed login attempts
made during this window does not reach the maximum number allowed,
the failed login attempts counter is reset to zero at the end of this window.
Note: The failed login attempts counter is always reset to zero anytime a
user successfully logs in.
The following are examples of how the account lockout feature works.
A RealPresence Group system web interface is configured with these settings:
● Admin Settings > Security > Local Accounts > Account Lockout > Lock Admin Account after
Failed Logins is set to 4.
● Admin Settings > Security > Local Accounts > Account Lockout > Admin Account Lock
Duration is set to 1 Minute.
● Admin Settings > Security > Local Accounts > Account Lockout > Reset Admin Account Lock
After is set to 1 Hour.
Scenario 1 - Admin account locked due to excessive failed logins
A user fails to log in to the Admin account twice on the web interface, and the same or another user fails to
log in to the Admin account on the local interface. This means that three failed attempts have been made
to the Admin account so far. If the next attempt to log in to the Admin account on any login port is
unsuccessful, which would mean 4 failed logins, further attempts to access the Admin account are locked
out for 1 Minute (the expiration of the Admin Account Lock Duration period). After the 1 Minute account
lock duration has past, logins will once again be allowed. As this example illustrates, the failed login attempts
made to an account accumulate across any login port.
Scenario 2 - Successful login resets the failed login attempts counter
A user fails to log in to the Admin account twice on the web interface, and the same or another user fails to
log in to the Admin account on the local interface. This means that three failed attempts have been made
to the Admin account so far. If the next login attempt is successful, then the failed login attempts counter
for the Admin account is reset to zero and now once again 4 failed attempts can be made before the Admin
account would be locked.
Polycom, Inc.
130
Security
Scenario 3 - Failed attempts counter resets after failed login window closes
A user fails to log in to the Admin account twice on the web interface, and the same or another user fails to
log in to the Admin account on the local interface. This means that three failed attempts have been made
to the Admin account so far. If no more failed attempts are made within 1 Hour of the first failed attempt
(which is the value of the Reset Admin Account Lock Counter After setting), the failed login attempts
counter for the Admin account is reset to zero, and 4 failed attempts are allowed again before the Admin
account is locked.
Enable a Whitelist and Add IP Addresses
When a whitelist is enabled, the Polycom RealPresence Group system web interface and SNMP ports
accept connections only from specified IP addresses. The whitelist supports both IPv4 and IPv6 addresses.
You can only configure this feature in the web interface.
Note: Update whitelist if you have dynamic IP address
If you use dynamic IP address assignment, ensure that you keep the whitelist up to date with the
latest assigned addresses for computers authorized to access the system. Failing to update the
whitelist means these computers cannot connect to the system.
To enable a whitelist:
1 In the web interface, go to Admin Settings > Security > Global Security > Access.
2 Select Enable Whitelist.
To add addresses to an enabled whitelist:
1 Click the Edit Whitelist link.
2 Select address type IPv4 or IPv6.
3 In the address text field, enter the IP address of the system you want to allow. Follow the format
suggested by the address type you selected. Select Add.
Repeat this step for all the IP addresses you want to add. You can add web server and SNMP
addresses.
If you entered an address in error, highlight the address in the list and select Clear.
IPv4 Address Formats
The whitelist configuration requires single IP addresses, a range of addresses, or an IP and netmask. The
netmask represents the number of valid bits of the IPv4 address to use. The following are valid IPv4 formats:
● 10.12.128.7
● 172.26.16.0/24
IPv6 Address Formats
For IPv6 addresses, you can use Classless Inter-Domain Routing (CIDR) notation to represent a range of
IP addresses. The following are valid IPv6 formats:
● ::1
Polycom, Inc.
131
Security
● 2001:db8:abc:def:10.242.12.23
● 2001:db8::/48
● 2001:db8:abcd:0012::0/64
● 2001:0db8:85a3:0000:0000:1234:0abc:cdef
Note: Whitelist limit
The system can accept up to 30 IP address entries for the whitelist.
Port Lockout
Port lockout protects against brute-force attacks by temporarily locking the login port after a configurable
number of unsuccessful login attempts have been made, regardless of which account was used. It is
supported only on the web interface.
Note: Telnet port lockout
The telnet port has a port lock feature that is enabled regardless of the state of the port lock feature
configuration. Specifically, the telnet server disconnects a telnet login session after 5 failed login
attempts. If a new session is started, another 5 attempts are allowed.
To configure the port lockout feature:
1 In the web interface, go to Admin Settings > Security > Global Security > Access.
2 Configure these settings and click Save.
Setting
Description
Lock Port after Failed Logins
Specifies the number of failed login attempts allowed before the system locks
the web interface from accepting logins. If set to Off, the system does not
lock the web interface due to failed login attempts.
Port Lock Duration
Specifies the amount of time that a web interface remains locked due to failed
login attempts. After this time period expires, the failed login attempts counter
is reset to zero and logins to the web interface are once again allowed.
Reset Port Lock Counter After
Specifies a “failed login window” period of time, starting with the first failed
login attempt, during which subsequent failed login attempts will be counted
against the maximum number allowed (Lock Port after Failed Logins). If the
number of failed login attempts made during this window does not reach the
maximum number allowed, the failed login attempts counter is reset to zero at
the end of this window.
Note: The failed login attempts counter is always reset to zero anytime a user
successfully logs in.
Port lockout is supported only on the web interface, and only Admin users are allowed to log in to the web
interface. If external authentication is not in use, users can successfully log in to the web interface only by
using the local Admin account credentials. However, when external authentication is in use, any number of
external accounts can be considered to be Admin users on the system. Failed logins to any of these
accounts, or to an unknown account, are all counted against the configured number allowed failed login
attempts to the web interface.
Polycom, Inc.
132
Security
The following is an example of how the port lockout feature works.
A RealPresence Group system web interface is configured with these settings:
● Admin Settings > Security > Global Security > Authentication> Enable Active Directory
External Authentication is enabled, a valid Active Directory Server Address is configured, as are
both the Active Directory Admin Group and Active Directory User Group settings.
● Admin Settings > Security > Global Security > Access > Lock Port after Failed Logins is set to
4.
● Admin Settings > Security > Global Security > Access > Port Lock Duration is set to 1 Minute.
● Admin Settings > Security > Global Security > Access > Reset Port Lock Counter After is set
to 1 Hour.
Scenario 1:Web interface locked due to excessive failed logins
A user fails to log in to the local Admin account two times on the web interface, and another user fails to
log in to the external Active Directory ‘SuperUser’ account in a separate web interface session. The
‘SuperUser’ account is defined as part of the Active Directory Admin Group on the Active Directory Server.
This means that three failed attempts have been made on the web interface port—two by one user and one
by a second user. If the next attempt to log in to the web interface by either user or some other user is
successful, the failed login counter for the web interface port is reset to zero, allowing 4 more failed attempts
to occur on the web interface.
On the other hand, if after the third failed login attempt, any user makes a fourth unsuccessful attempt to
any account on the web interface, further attempts to access the web interface using any account
credentials from any user are locked out for 1 Minute, the value of the Port Lock Duration period. After the
1 Minute port lock period has past, logins will once again be allowed. As this example illustrates, the failed
login attempts made to the web interface accumulate across any attempts to any account and/or by any
user.
Scenario 2: Failed attempts counter resets after failed login window closes
A user fails to log in to the local Admin account two times on the web interface, and another user fails to
log in to the external Active Directory ‘SuperUser’ account in a separate web interface session. The
‘SuperUser’ account is defined as part of the Active Directory Admin Group on the Active Directory Server.
This means that three failed attempts have been made on the web interface port—two by one user and one
by a second user. If no more failed attempts are made within 1 Hour of the first failed attempt (which is the
value of the Reset Port Lock Counter After setting), the failed login attempts counter is reset to zero, and
4 failed attempts are allowed again before the web interface is locked.
Encryption
AES encryption is a standard feature on all Polycom RealPresence Group systems. When it is enabled, the
system automatically encrypts calls to other systems that have AES encryption enabled.
If encryption is enabled on the system, a locked padlock icon appears on the monitor when a call is
encrypted. If a call is unencrypted, an unlocked padlock appears on the monitor. In a multipoint call, some
connections might be encrypted while others are not. The padlock icon might not accurately indicate
whether the call is encrypted if the call is cascaded or includes an audio-only endpoint. To avoid security
risks, Polycom recommends that all participants communicate the state of their padlock icon verbally at the
beginning of a call.
Keep in mind the following points regarding AES encryption:
Polycom, Inc.
133
Security
● AES encryption is not supported on systems registered to an Avaya H.323 gatekeeper.
● For Polycom RealPresence Group systems with a maximum speed of 6 Mbps for unencrypted calls,
the maximum speed for encrypted SIP calls is 4 Mbps.
RealPresence Group systems provide the following AES cryptographic algorithms to ensure flexibility when
negotiating secure media transport:
● H.323 (per H.235.6)
 AES-CBC-128 / DH-1024
 AES-CBC-256 / DH-2048
● SIP (per RFCs 3711, 4568, 6188)
 AES_CM_128_HMAC_SHA1_32
 AES_CM_128_HMAC_SHA1_80
 AES_CM_256_HMAC_SHA1_32
 AES_CM_256_HMAC_SHA1_80
RealPresence Group systems also support the use of FIPS 140 validated cryptography, which is required
in some instances, such as when used by the U.S. federal government. When the Require FIPS 140
Cryptography setting is enabled, all cryptography used on the system comes from a software module that
has been validated to FIPS 140-2 standards. You can find its FIPS 140-2 validation certificate here:
http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm#1747.
To enable encryption:
1 Do one of the following:
 In the local interface, go to Settings > Administration > Security > Settings.
 In the web interface, go to Admin Settings > Security > Global Security > Encryption.
2 Configure these settings.
Polycom, Inc.
134
Security
Setting
Description
Require AES Encryption for
Calls
Specifies how to encrypt calls with other sites that support AES encryption.
• Off—AES encryption is disabled.
• When Available—AES encryption is used in calls with systems that
support it. Calls without encryption are allowed when connecting to
systems that don't support it. For multipoint calls, this means that some
systems might be connected with AES encryption while others are
connected without it.
• Required for Video Calls Only—AES encryption is used in all video calls.
Calls with systems that do not support it are disconnected. Audio calls
using an attached SoundStation IP 7000 are allowed to connect.
• Required for All Calls—AES encryption is used in all calls. Calls with
systems that do not support it are disconnected. Audio calls using an
attached SoundStation IP 7000 are not allowed to connect, since these
calls are not encrypted.
Require FIPS 140 Cryptography
(web interface only)
Enables the exclusive use of the FIPS 140-2-validated software cryptography
module for cryptographic functions. Also disables all “weak” protocols and
ciphers, including:
• SSLv2
• SSLv3
• Non-FIPS 140-2 approved TLS cipher suites
Configure Encryption Settings for SVC Calls
You must complete two quick tasks to enable encryption for SVC calls:
● Set the transport protocol.
● Set AES encryption.
To set the transport protocol:
1 In the web interface, go to Admin Settings > Network > IP Network.
2 Click SIP to expand the section.
3 In the Transport Protocol list, select TLS.
4 Click Save.
To set AES encryption:
1 In the web interface, go to Admin Settings > Security > Global Security.
2 Click Encryption to expand the section.
3 In the Require AES Encryption for Calls list, select When Available, Required for Video Calls
Only, or Required for All Calls.
4 Click Save.
For more information on SVC-based calling, refer to Set SVC Call Preferences.
Polycom, Inc.
135
Security
Configure Encryption Settings for Integration with Microsoft Servers
Polycom RealPresence Group systems support media encryption in calls with Microsoft Lync 2010/2013.
The encryption settings for each component also affect the ability to place encrypted calls.
Both the Microsoft Lync Server pool and the Polycom RealPresence Group system need to be configured
to support encryption in order for calls to connect with encryption. If both components have encryption
turned off, calls connect without encryption. If one component is set to require encryption and the other is
not, calls fail to connect.
Calls from a Polycom RealPresence Group system to a Polycom RMX system using Microsoft Lync Server
require that the Polycom RealPresence Group system have encryption set to When Available.
For more information about encryption configuration in a Microsoft Lync Server environment, refer to the
Polycom Unified Communications Deployment Guide for Microsoft Environments.
H.323 Media Encryption
To provide extra security for encrypted H.323 calls, the RealPresence Group system provides an encryption
check code. Both parties in a call can use this check code to verify that their call is not being intercepted by
a 3rd party.
The check code is a 16-digit hexadecimal number that is calculated so that the number is the same at both
sites in the call. The numbers are identical if, and only if, the key generation algorithm is performed between
the two sites in the call and is not intercepted and modified by a 3rd party.
To verify the check codes match:
1 Establish an encrypted H.323 call between two sites.
2 At each site, locate the Call Statistics information on the Place a Call screen of the web interface.
The check code also displays under Diagnostics > System > Call Statistics in the Transmit
column of the Call Encryption section.
3 Verbally verify that the code is the same at both sites.
4 Do one of the following:
 If the codes match, the call is secure. Proceed with the call.
 If the codes do not match, then there is a possibility that the key exchange is compromised. Hang
up the call. Next, check the network path from the local system to the far-end system to determine
if the systems are experiencing a Man in the Middle attack. This occurs when a foreign device
tricks the local system into creating an encryption key using information from the imposter. Then,
the imposter can decode the data sent by the local system and eavesdrop on the call.
List of Sessions
You can use the sessions list to see information about everyone logged in to a RealPresence Group system
including:
● Type of connection, for example, Web
● ID associated with the session, typically Admin or User
● Remote IP address (that is, the addresses of people logged in to the RealPresence Group system
from their computers)
Polycom, Inc.
136
Security
To view the Sessions List:
» From the local interface, go to Settings > System Information > Diagnostics > Sessions.
» From the web interface, go to Diagnostics > System > Sessions.
Enable Visual Security Classification
This feature helps RealPresence Group system call participants remain conscious of the security
classification when in a BroadWorks managed call. During and throughout a call, the Visual Security
Classification (VSC) provides a visual indication to the RealPresence Group system user of the calls
security level which is dynamically calculated using the lowest security rating of all users and gateways
within the call. During a call, you can override the security classification and assign a lower security
classification level.
Keep the following points in mind:
● Each BroadSoft-registered endpoint in the conference has a security classification level.
● BroadSoft Application Server determines the default security classification level for a BroadWorks
conference, and that default is the lowest of the levels involved in the conference. VSC is only
supported on BroadWorks conferencing systems which are VSC aware and which have visibility of
all participants in the call. VSC is not supported on Polycom VMR’s, as BroadWorks does not have
visibility of the callers on the Polycom MCU.
● The security classification level is shared with all the endpoints that support the Visual Security
Classification feature.
● The security classification level of a conference call is re-evaluated whenever an endpoint enters or
leaves a conference or when a user modifies the security classification level of an endpoint.
Any user who joins the call from an outside or unknown network is designated an “Unclassified” security
classification level.
The Visual Security Classification feature is disabled by default. Enable it with a provisioning server or
through the web interface. Before enabling this feature, ensure the following:
● The RealPresence Group system must be registered to a BroadSoft R20 call server.
● The Multipoint Video Conferencing option key must be disabled.
● AS-SIP must be disabled.
To enable Visual Security Classification:
1 From the web interface, navigate to Admin Settings > Security > Global Security.
2 Under Visual Security Classification, select Enable Visual Security Classification and click Save.
3 Under Visual Security Classification, click the Adjust SIP Settings link or navigate to Admin
Settings > Network > IP Network > SIP.
4 Under Registrar Server Type, select Unknown.
Manage Certificates and Revocation
If your organization has deployed a public key infrastructure (PKI) for securing connections between
devices on your network, Polycom recommends that you have a strong understanding of certificate
Polycom, Inc.
137
Security
management and how it applies to RealPresence Group Series products before you integrate these
products with the PKI.
RealPresence Group systems can use certificates to authenticate network connections to and from the
Polycom RealPresence Group system. Other web applications also use certificates, as you might notice
when you navigate the Internet. The system uses configuration and management techniques typical of PKI
to manage certificates, certificate signing requests, and revocation checking. ANSI X.509 standards
regulate the characteristics of certificates and revocation.
RealPresence Group systems can generate requests for certificates (CSRs) that can be then sent to a
certificate authority (CA) for official issuance. The CA is the trusted entity that issues, or signs, digital
certificates for others. Once signed by the CA, you can install the certificate on the RealPresence Group
system for use in all TLS connections used by the system.
RealPresence Group systems support, and typically require, the generation and use of two separate
certificates when used in an environment that has a fully deployed PKI:
1 A Server certificate—the RealPresence Group system’s web server presents this certificate after
receiving connection requests from browsers attempting to connect to the RealPresence Group
system web interface.
2 A Client certificate—the RealPresence Group system presents this certificate to a remote server
when challenged to provide a certificate as part of authenticating the identity of the RealPresence
Group system before allowing it to connect to the remote server. Examples of remote servers
include the RealPresence® Resource Manager system, a SIP proxy/registrar server, or an LDAP
directory server.
When RealPresence Group systems are deployed in an environment that does not have a fully deployed
PKI, you do not need to install these certificates because all RealPresence Group systems automatically
generate self-signed certificates that can be used to establish secure TLS connections. However, when a
full PKI has been deployed, self-signed certificates are not trusted by the PKI and so signed certificates must
be used. The following sections describe how to generate and use certificates by using the Polycom
RealPresence Group system web interface.
Generate Certificate Signing Requests (CSRs)
The RealPresence Group system allows you to install one client and one server certificate for identification
of the RealPresence Group system to network peers. In order to obtain these certificates you must first
generate a Certificate Signing Request (CSR) for each certificate. This request, also known as an unsigned
certificate, must be submitted to a CA so that it can be signed, after which the certificate can be installed on
the RealPresence Group system. Whether you need to generate a client-type CSR, a server-type CSR, or
both depends on which features and services you intend to use, and whether your network environment
supports certificate-based authentication for those services. In most cases, both certificates are needed.
For example, if your RealPresence Group system is configured to use any of the following features, and the
servers providing those services perform certificate-based authentication before allowing access to them,
you must create a client-type CSR and add the resulting certificate signed by the CA:
● RealPresence Resource Manager system Provisioning
● RealPresence Resource Manager system Monitoring
● RealPresence Resource Manager system LDAP Directory
● RealPresence Resource Manager system Presence
● Calendaring
● SIP
Polycom, Inc.
138
Security
● 802.1X
The RealPresence Group system web server uses the server-type CSR and resulting certificate whenever
a user attempts to connect to the RealPresence Group system web interface. The web server does so by
presenting the server certificate to the browser to identify the system to the browser as part of allowing the
browser to connect to the system. The browser’s user needs the server certificate if he or she wants to be
certain about the identity of the RealPresence Group system he or she is connecting to. Settings in the web
browser typically control the validation of the server certificate, but you can also validate the certificate
manually.
To obtain a client or server certificate, you must first create a CSR. You can create one client and one server
CSR and submit each to the appropriate CA for signing. After the CSR is signed by a CA, it becomes a
certificate you can add to the RealPresence Group system.
To create a CSR:
1 Go to Admin Settings > Security > Certificates > Certificate Options.
2 Click Create for the type of CSR you want to create, Signing Request Server or Signing Request
Client. The procedure is the same for server and client CSRs.
3 Configure these settings on the Create Signing Request page and click Create.
Setting
Description
Hash Algorithm
Specifies the hash algorithm for the CSR. You may select SHA-256 or keep the
default SHA-1.
Common Name (CN)
Specifies the name that the system assigns to the CSR.
Polycom recommends the following guidelines for configuring the Common Name:
• For systems registered in DNS, use the Fully Qualified Domain Name (FQDN)
of the system.
• For systems not registered in DNS, use the IP address of the system.
Organizational Unit (OU)
Specifies the unit of business defined by your organization.
Organization (O)
Specifies your organization’s name.
City or Locality (L)
Specifies the city where your organization is located.
State or Province (ST)
Specifies the state or province where your organization is located.
Country (C)
Displays the country selected in Admin Settings > General Settings > My
Information.
Note: Adding more OU fields
The RealPresence Group system supports only one OU field. If you want the signed certificate to
include more than one OU field, you must download and edit the CSR manually.
After you create the CSR, a message indicating that the CSR has been created displays. Two links appear
next to the signing request that you just created (Signing Request Server or Signing Request Client).
● Download Signing Request enables you to download the CSR so that it can be sent to a CA for
signature.
Polycom, Inc.
139
Security
● Create enables you to view the fields of the CSR as they are currently set in the CSR. If you change
any of the values you previously configured, you can click Create to generate a new CSR that can
then be downloaded.
Note: One CSR allowed
Only a single outstanding CSR of either type can exist at a time. After the CSR is generated, it is
important to get it signed and installed before attempting to generate a different CSR of the same
type. For example, if you generate a client CSR and then, prior to having it signed and installed on the
RealPresence Group system, another client CSR is generated, the previous CSR is discarded and
invalidated, and any attempt to install a signed version of it will result in an error.
Install Certificates
After you have downloaded a CSR and it has been signed by a CA, the resulting certificate is ready to install
on the RealPresence Group system. The following section outlines how to do this, and the procedure is the
same for installing the client certificate, the server certificate, and any required CA-type certificates.
To add a signed certificate on the Certificates page:
1 Click View and Add to open the certificate section.
2 Next to Add Certificate, click Browse to search for and select a certificate. You might be installing a
client or server certificate that has been signed by a CA after having been previously generated as a
CSR, or installing a CA certificate needed by the RealPresence Group system to validate a
certificate it receives from another system.
3 Click Open.
The system checks the certificate data and adds it to the list. If you don't see the certificate in the list,
the system was unable to recognize the certificate. This process is sometimes referred to as installing
a certificate.
You can select a certificate in the list to view its contents. You can also remove a certificate from the
list by clicking Remove.
4 If needed, click Close to close the certificate section of the page.
5 Click Save.
When you add a CA certificate to the RealPresence Group system, the certificate becomes trusted for the
purpose of validating peer certificates.
Note: Add server certificate before using web interface
If you do not add the server certificate for the RealPresence Group system before using the web
interface, you might receive error messages from your browser stating that the security certificate for
the web site “Polycom” cannot be verified. Most browsers allow the user to proceed after this warning
is displayed. See the Help section of your browser for instructions on how to do this.
Configure Certificate Validation Settings
Certificates are authorized externally when they are signed by the CA. The certificates can be automatically
validated when they are used to establish an authenticated network connection. To perform this validation,
the RealPresence Group system must have certificates installed for all CAs that are part of the trust chain.
A trust chain is the hierarchy of CAs that have issued certificates from the device being authenticated,
through the intermediate CAs that have issued certificates to the various CAs, leading back to a root CA,
which is a known trusted CA. The following sections describe how to install and manage these certificates.
Polycom, Inc.
140
Security
A certificate exchange is between a server and a client, both of which are peers. When a user is accessing
the RealPresence Group system web interface, the RealPresence Group system is the server and the web
browser is the client application. In other situations, such as when the RealPresence Group system
connects to LDAP directory services, the RealPresence Group system is the client and the LDAP directory
server is the server.
To configure certificate usage:
1 Go to Admin Settings > Security > Certificates > Certificate Options.
2 Configure these settings on the Certificates screen and click Save.
Setting
Description
Maximum Peer Certificate
Chain Depth
Specifies how many links a certificate chain can have. The term peer
certificate refers to any certificate sent by the far-end host to the
RealPresence Group system when a network connection is being established
between the two systems.
Always Validate Peer
Certificates from Browser
Controls whether the RealPresence Group system requires a browser to
present a valid certificate when it tries to connect to the web interface.
Always Validate Peer
Certificates from Server
Controls whether the RealPresence Group system requires the remote server
to present a valid certificate when connecting to it for services such as those
listed for client-type CSRs in Generate Certificate Signing Requests (CSRs)
(provisioning, directory, SIP, and so forth).
Configure Certificate Revocation Settings
When certificate validation is enabled (refer to Configure Certificate Validation Settings), the RealPresence
Group system tries to validate the peer certificate chain on secure connection attempts for the applicable
network services.
Part of the validation process includes a step called revocation checking. This type of check involves
consulting with the CA that issued the certificate in question to see whether the certificate is still active or
has been revoked for some reason. Revoked certificates are considered invalid because they might have
been compromised in some way or improperly issued, or for other similar reasons. The CA is responsible
for maintaining the revocation status of every certificate that it issues. The RealPresence Group system can
check this revocation status by using either of the following methods:
● Certificate revocation lists (CRLs). A CRL is a list of certificates that have been revoked by the CA.
A CRL must be installed on the RealPresence Group system for each CA whose certificate has been
installed on the system.
● The Online Certificate Status Protocol (OCSP). OCSP allows the RealPresence Group system to
contact an OCSP responder, which is a network server that provides real-time certificate status
through a query/response message exchange.
You must configure the RealPresence Group system to use the revocation method most appropriate for
your environment.
Polycom, Inc.
141
Security
Note: CRL download limitation
The RealPresence Group systems automatically download CRLs from the Certificate Authorities
(CAs) that make CRLs available for retrieval by HTTP.
However, for CAs that do not allow HTTP retrieval of CRLs, the RealPresence Group system
administrator is responsible for manually installing and updating CRLs ahead of their expiration. It is
extremely important that CRLs be kept up to date.
To use CRLs:
1 Go to Admin Settings > Security > Certificates > Revocation.
2 Configure these settings on the Revocation page and click Save.
Setting
Description
Revocation Method
Select the CRL method.
Allow Incomplete
Revocation Checks
When this field is enabled, a certificate in the chain is verified without a revocation
status check if no corresponding CRL for the issuing CA is installed.
The RealPresence Group system assumes that the lack of a CRL means the
certificate is not revoked. If a CRL is installed, the system performs a revocation
check when validating the certificate.
Add CRL
1
2
Click Browse to search for and select a CRL.
Click Open to add the CRL to the list.
You can also view automatically and manually downloaded CRLs on this page. To remove a CRL from the
list, click Remove.
Note: Expired CRL blocks web interface access
If the Always Validate Peer Certificates from Browsers setting is enabled and the expired CRL is
for a CA that is part of the trust chain for the client certificate sent by your browser, you can no longer
connect to the RealPresence Group system web interface because the revocation check always fails.
In this case, unless the RealPresence Group system web interface can be accessed by a user whose
client certificate's trust chain does not include the CA with the expired CRL, you must delete all
certificates and CRLS from the system and then reinstall them. See the Delete Certificates and CRLs
for more information.
To use OCSP:
1 Go to Admin Settings > Security > Certificates > Revocation.
2 Configure these settings on the Revocation page and click Save.
Polycom, Inc.
142
Security
Setting
Description
Revocation Method
Select the OSCP method.
Allow Incomplete
Revocation Checks
When this field is enabled, the RealPresence Group system treats the following
response from the OCSP responder as a successful revocation checks that would
otherwise be considered a failed check:
• If the OCSP responder responds that the status is unknown or if no response is
received, the system treats this as a successful revocation check.
Regardless of the state of this setting, the following statements apply:
• If the OCSP responder indicates a known revoked status, the RealPresence
Group system treats this as a revocation check failure and does not allow the
connection.
• If the OCSP responder indicates a known good status, the RealPresence Group
system treats this as a successful revocation check and allows the connection.
Global Responder Address
Specifies the URI of the responder that services OCSP requests (for example,
http://responder.example.com/ocsp). This responder is used for all
OCSP validation when Use Responder Specified in Certificate is disabled, and
is sometimes used even when Use Responder Specified in Certificate is
enabled. Polycom therefore recommends that you always enter a Global
Responder Address regardless of the value chosen for the Use Responder
Specified in Certificate setting.
Use Responder Specified
in Certificate
In some cases, the certificate itself includes the responder address. When this field
is enabled, the RealPresence Group system attempts to use the address in the
certificate (when present) instead of the Global Responder Address specified in
the previous field.
Note: The Polycom RealPresence Group system supports only the use of HTTP
URLs in the AIA field of a certificate when Use Responder Specified in
Certificate is enabled.
Note: OCSP response message and CA certificates
For validation of the OCSP response message, if you use OCSP, you might need to install one or
more additional CA certificates on the RealPresence Group systems.
Certificates and Security Profiles within a Provisioned System
When your RealPresence Group system is provisioned through the RealPresence Resource Manager
system and you use PKI certificates, consider the following information. Be sure to enable provisioning after
you follow the procedures applicable to each Security Profile type.
● To use the Maximum Security Profile with provisioning:
 The RealPresence Resource Manager system must be using Maximum Security Mode.
 You must manually assign the Maximum Security Profile to the RealPresence Group endpoint
during installation using the setup wizard, or afterwards using the web interface.
 You must use full PKI and observe the following procedures before you enable provisioning on
the RealPresence Group endpoint:
1
Polycom, Inc.
You must install a signed client certificate on the RealPresence Group system to enable the
provisioning connection to be authenticated by the RealPresence Resource Manager system.
143
Security
2
Decide whether to automatically validate web clients by enabling the Always Validate Peer
Certificates from Browsers setting. If you do enable the setting, you’ll need to install a
signed server certificate and all of the CA certificates needed to validate browser certificates
for all web clients. Then configure the certificate revocation method.
3
Decide whether to validate servers by enabling the Always Validate Peer Certificates from
Servers setting. If you do enable the setting, you must install of the CA certificates needed to
validate server certificates from all remote servers. Then adjust the certificate revocation
method accordingly. For example, you might need to load additional CRLs if you use the CRL
revocation method).
● To use the Medium or High Security Profile with provisioning:
 The RealPresence Resource Manager system must be using commercial mode.
 You must manually assign the Medium or High Security Profile to the RealPresence Group
endpoint during installation using the setup wizard, or afterwards using the web interface.
 Configure PKI according to your company’s guidelines.
● To use the Low Security Profile with provisioning:
 The RealPresence Resource Manager system must be using commercial mode.
 You can enable provisioning in the setup wizard. All provisionable settings are taken from the
RealPresence Resource Manager system.
Delete Certificates and CRLs
In some cases, expired certificates or CRLs might prevent you from accessing the web interface. You can
use the local interface to reset your system without certificates, to restore access to the web interface.
To delete all certificates and CRLs the RealPresence Group system is using:
1 In the local interface, go to System > Diagnostics > Reset System.
2 If needed, enter the Admin ID and Password.
3 Enable the Delete Certificates field.
4 Select Reset System.
The RealPresence Group system restarts after deleting all installed certificates and CRLs.
RealPresence Server Address Configuration in PKI-enabled Environments
When configuring the server addresses for the services listed in Generate Certificate Signing Requests
(CSRs) as potentially needing a client-type CSR (such as SIP, LDAP directory etc.), you might need to use
a particular address format if the server address is contained in the server certificate that it presents when
connecting to it. If this is the case, use the following guidance for configuring these server addresses on the
RealPresence Group system:
● If the certificate contains the fully qualified domain name (FQDN) of the server, use the FQDN when
configuring the server address.
● If the certificate contains the IP address of the server, use the IP address when configuring the server
address.
● If the certificate does not contain any the server's address in any form, you can use either the FQDN
or the IP address of the server when configuring the server address.
Polycom, Inc.
144
Security
Set Up Security Banners
Security banners consist of text that displays on the Login screen and in a window when you log in remotely.
The following is an example of banner text:
This machine is the property of Polycom, Inc., and its use is governed by company
guidelines. You have NO right of privacy when using this machine.
Note: No security banner on Touch Control
The security banner is not supported with Polycom Touch Control.
To configure a security banner:
1 In the web interface, go to Admin Settings > Security > Security Banner.
2 Configure these settings and click Save.
Setting
Description
Enable Security Banner
Specifies whether to display a security banner.
Banner Text
Custom—Allows you to enter text to use for the banner.
DoD—Specifies that the system displays a default U.S. Department of Defense
security banner. You cannot view or change this text on the local interface, but you
can change the text on the web interface.
Local System Banner
Text
If you enable the security banner on the web interface, enter up to 2,408 single-byte
or 1,024 double-byte characters. The text wraps to the next line as you type, but you
can press ENTER anywhere in a line to force a line break at a specific place.
Remote Access Banner
Text
This field is visible only when you use the web interface. You can type or paste a
maximum of 2,408 single-byte or 1,024 double-byte characters. The text wraps to the
next line as you type, but you can press ENTER anywhere in a line to force a line break
at a specific place.
Configure a Meeting Password
If you set up a meeting password, users must supply the password to join multipoint calls on the
RealPresence Group system when the call uses the internal multipoint option, rather than a bridge.
Remember the following points about meeting passwords:
● Do not set a meeting password if multipoint calls include audio-only endpoints. Audio-only endpoints
are unable to participate in password-protected calls.
● Microsoft Office Communicator clients are unable to join password-protected multipoint calls.
● SIP endpoints are unable to connect to password-protected multipoint calls.
● If a meeting password is set for a call, People+Content™ IP clients must enter the password before
joining the meeting.
● Meeting passwords cannot contain spaces or be more than 32 characters.
Polycom, Inc.
145
Security
To configure a meeting password:
1 Do one of the following:
 In the local interface, go to Settings > Administration > Security > Passwords.
 In the web interface, go to Admin Settings > Security > Meeting Password.
2 Enable and configure the Meeting Password setting.
Polycom, Inc.
146
Manage the System Remotely
You can configure, manage, and monitor Polycom RealPresence Group systems from a computer using the
system web interface. You can also use Polycom CMA, Polycom RealPresence Resource Manager, SNMP,
or the API commands.
● The Polycom RealPresence Group system web interface requires only a web browser.
● Polycom CMA and RealPresence Resource Manager require the management application to be
installed on your network.
● SNMP requires network management software on your network management station.
● For more information about the API commands, refer to the Polycom RealPresence Group Series
Integrator Reference Guide.
Use the Polycom RealPresence Group System Web
Interface
You can use the Polycom RealPresence Group system web interface to perform most of the calling and
configuration tasks you can perform on the local system. The Polycom RealPresence Group system web
interface is supported for Microsoft Internet Explorer version 9 or later or Mozilla Firefox 22 on Windows,
and Apple Safari 6.0.5 on Mac OS X.
Access the Web Interface
To configure your browser to use the web interface:
● Be sure that you use Microsoft Internet Explorer 9.0 or later, or Apple Safari, as your web browser.
● Configure the browser to allow cookies.
To access the system using the web interface:
1 In your web browser address line, enter the system’s IP address, for example,
http://10.11.12.13.
2 Enter the Admin ID as the user name (default is admin), and enter the Admin Remote Access
Password, if one is set.
Monitor a Room or Call with the Web Interface
The monitoring feature within the web interface allows administrators of RealPresence Group systems to
view a call or the room where the system is installed.
Polycom, Inc.
147
Manage the System Remotely
To enable room and call monitoring:
1 In the local interface, go to Settings > Administration >Security > Remote Access.
2 Enable Allow Video Display on Web to allow the room or call to be viewed remotely.
To monitor a room or call using the web interface:
1 In your web browser address line, enter the system’s IP address.
2 Go to Utilities > Tools > Remote Monitoring.
3 Perform the following tasks, depending on whether you are in or out of a call:
 Place or end a call
 View near and far sites
 Use Call Control to change moderators and broadcast participants
 Show content from a laptop, PC, DVD player, or document camera
 Change camera sources
 Adjust camera position
 Adjust system volume
 View camera presets
 Zoom cameras
 Mute and unmute the microphones
Manage System Profiles with the Web Interface
Administrators managing systems that support multiple applications can change system settings using
profiles. You can store a RealPresence Group system profile on a computer as a .profile file using the
web interface. The number of profiles you can save is unlimited.
The following settings are included in a profile:
● Home screen settings
● User access levels
● Icon selections
● Option keys
● System behaviors
Passwords are not included when you store a profile.
Note: System profiles for backing up system
Polycom recommends only using profiles as a way to back up system settings. Attempting to edit a
stored profile or upload a stored profile from one system to a different system can result in instability
or unexpected results.
To store a profile using the web interface:
1 In your web browser address line, enter the system’s IP address.
2 Go to Utilities > Services > Profile Center.
Polycom, Inc.
148
Manage the System Remotely
3 Click Download next to Current Settings Profile to download the profile file from the system.
4 Save the file to a location on your computer.
To upload a profile using the web interface:
1 Reset the Polycom RealPresence Group system to restore default settings.
2 In your web browser address line, enter the system’s IP address.
3 Go to Utilities > Services > Profile Center.
4 Next to Upload Settings Profile, click Browse and browse to the location of the profile .csv file on
your computer.
5 Click Open to upload the .csv file to your system.
Send a Message
If you are experiencing difficulties with connectivity or audio, you might want to send a message to the
system that you are managing.
Only the near site can see the message; it is not broadcast to all the sites in the call.
To send a message using the web interface:
1 Go to Diagnostics > Send a Message.
2 In the Send a Message page, enter a message (up to 100 characters in length), then click Send.
The message is displayed for 15 seconds on the screen of the system that you are managing.
Configure Servers
Set Up a Directory Server
The global directory provides a list of other systems that are registered with the Global Directory Server and
available for calls. The other systems appear in the directory, allowing users to place calls to other users by
selecting their names.
You can configure the system to use one of the following directory servers in standard operating mode.
Polycom, Inc.
149
Manage the System Remotely
Directory Servers
Supported
Authentication
Protocols
Global Directory
Groups
Polycom GDS
Proprietary
Not Supported
Might include:
• H.323 IP address (raw IPv4 address, DNS
name, or H.323 extension)
• ISDN number
LDAP with H.350 or
Active Directory
Any of the
following:
• NTLM v2
only
• Basic
• Anonymous
Not Supported
Might include:
• H.323 IP address (raw IPv4 address, DNS
name, H.323 dialed digits, H.323 ID, or
H.323 extension)
• SIP address (SIP URI)
• ISDN number
• Phone number*
Microsoft Lync Server
2010 and 2013
NTLM v2 only
Contact groups but
not distribution
lists
Might include:
• SIP address (SIP URI)
Entry Calling Information
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
You can configure the system to use the following directory servers when the system is automatically
provisioned by a Polycom CMA or Polycom RealPresence Resource Manager system.
Directory Servers
Supported
Authentication
Protocol
Global Directory
Groups
LDAP by a Polycom
CMA system
NTLM v2 only
Pre-defined groups
from the LDAP
directory are shown in
Polycom
RealPresence Group
system directory
Might include:
• H.323 dialed digits, H.323 ID, or H.323
extension
• Phone number*
Microsoft Lync
Server 2010 and
2013
NTLM v2 only
Contact groups but not
distribution lists
Might include:
• SIP address (SIP URI)
Entry Calling Information
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
To configure the Polycom GDS directory server:
1 In the web interface, go to Admin Settings > Servers > Directory Servers and select the Polycom
GDS Service Type.
2 Configure these settings on the Directory Servers page.
Polycom, Inc.
150
Manage the System Remotely
Setting
Description
Server Address
Specifies the IP address or DNS address of the Global Directory Server. You can enter up to
five addresses.
Password
Lets you enter the global directory password, if one exists.
To configure the LDAP directory server:
1 In the web interface, go to Admin Settings > Servers > Directory Servers and select the LDAP
Server Type.
2 Configure these settings on the Directory Servers page.
LDAP Setting
Description
Server Address
Specifies the address of the LDAP directory server. With Automatic Provisioning, this setting
is configured by the server and appears as read only.
Server Port
Specifies the port used to connect to the LDAP server. With Automatic Provisioning, this
setting is configured by the server and appears as read only.
Base DN
(Distinguished
Name)
Specifies the top level of the LDAP directory where searches will begin. With Automatic
Provisioning, this setting is configured by the server and appears as read only.
Multitiered
Directory
Default Group
DN
Specifies the top level group of the LDAP directory required to access the hierarchical
structure. With Automatic Provisioning, this setting is configured by the server and appears as
read only.
Authentication
Type
Specifies the protocol used for authentication with the LDAP server: NTLM, BASIC, or
Anonymous.
Use SSL
(Secure Socket
Layer)
Enables SSL for securing data flow to and from the LDAP server.
Domain Name
Specifies the domain name for authentication with the LDAP server.
User Name
Specifies the user name for authentication with LDAP server.
Password
Specifies the password for authentication with the LDAP server.
To configure the Microsoft Lync Server 2010 or 2013 directory settings:
1 In the web interface, go to Admin Settings > Network > IP > SIP Settings.
2 Configure the SIP settings as described in Configure SIP Settings for Integration with Microsoft
Servers.
3 In the web interface, go to Admin Settings > Servers > Directory Servers and select the
Microsoft Lync Server 2010 Service Type.
4 Configure these settings on the Directory Servers page.
Polycom, Inc.
151
Manage the System Remotely
Setting
Description
Registration
Status
Specifies whether the system is successfully registered with the Microsoft Lync Server.
Domain Name
Specifies the Domain Name entered on the SIP Settings screen.
Domain User
Name
Specifies the Domain User Name entered on the SIP Settings screen.
User Name
Specifies the User Name entered on the SIP Settings screen.
Set Up SNMP
RealPresence Group systems support SNMP (Simple Network Management Protocol) versions 1, 2c,
and 3. A RealPresence Group system sends SNMP reports to indicate conditions, including the following:
● All alert conditions found on the Polycom RealPresence Group system alert page
● Details of jitter, latency, and packet loss
● Low battery power is detected in the remote control
● A system powers on
● Administrator logon is successful or unsuccessful
● A call fails for a reason other than a busy line
● A user requests help
● A telephone or video call connects or disconnects
SNMP features specific to version 3 include the following:
● Allows for secured connectivity between the console and the SNMP agent
● Supports both IPv4 and IPv6 networks
● Logs all configuration change events
● Supports a user-based security model
● Supports trap destination addresses
Download MIBs
In order to allow your SNMP management console application to resolve SNMP traps and display human
readable text descriptions for those traps, you need to install Polycom MIBs (Management Information
Base) on the computer you intend to use as your network management station. The MIBs are available for
download from the Polycom RealPresence Group system web interface.
To download a Polycom MIB using the Polycom RealPresence Group system web
interface:
1 In your web browser address line, enter the RealPresence Group system’s IP address.
2 Go to Admin Settings > Servers > SNMP.
3 Click the desired link:
 Download Legacy MIB
Polycom, Inc.
152
Manage the System Remotely
 Download MIB
Set Up SNMP Management
To configure the RealPresence Group system for SNMP Management:
1 In the web interface, go to Admin Settings > Servers > SNMP.
2 Configure these settings on the SNMP screen, then click Save.
Setting
Description
Enable SNMP
Allows administrators to manage the system remotely using SNMP.
Enable Legacy
Notifications
Supports sending notifications that are compatible with the legacy MIB.
Enable New
Notifications
Supports sending notifications that are compatible with the new MIB.
Version1
Enables the use of the SNMPv1 protocol.
Version2c
Enables the use of the SNMPv2c protocol.
Version3
Enables the use of the SNMPv3 protocol.
You must select this setting to use the subsequent settings that apply only to SNMPv3.
Read-Only
Community
Specifies the SNMP management community in which you want to enable this system. The
default community is public.
Note: Polycom does not support SNMP write operations for configuration and provisioning;
the read-only community string is used for both read operations and outgoing SNMP traps.
Contact Name
Specifies the name of the person responsible for remote management of this system.
Location Name
Specifies the location of the system.
System Description
Specifies the type of video conferencing device.
User Name
Specifies the SNMPv3 User Security Model (USM) account name that will be used for
SNMPv3 message transactions. The maximum length is 64 characters.
Authentication
Algorithm
Specifies the type of SNMPv3 authentication algorithm used:
• SHA
• MD5
Authentication
Password
Specifies the SNMPv3 authentication password. The maximum length is 48 characters.
Privacy Algorithm
Specifies the type of SNMPv3 cryptography privacy algorithm used:
• CFB-AES128
• CBC-DES
Privacy Password
Specifies the SNMPv3 privacy (encryption) password. The maximum length is 48
characters.
Polycom, Inc.
153
Manage the System Remotely
Setting
Description
Engine ID
Specifies the unique ID of the SNMPv3 engine. This setting might be needed for matching
the configuration of an SNMP console application. The Engine ID is automatically
generated, but you can create your own ID, as long as it’s between 10 and 32 hexadecimal
digits. Each group of 2 hex digits can be separated by a colon character (:) to form a full
8-bit value. A single hex digit delimited on each side with a colon is equivalent to the same
hex digit with a leading zero (therefore, :F: is equivalent to :0f:).
The ID cannot be all zeros or all Fs.
Listening Port
Specifies the port number SNMP uses to listen for messages. The default listening port is
161.
Transport Protocol
Specifies the transport protocol used:
• TCP
• UDP
Destination
Address1
Destination
Address2
Destination
Address3
Specifies the IP addresses of the computers you intend to use as your network
management station and to which SNMP traps will be sent.
Each address row has four settings:
1 IP Address (accepts IPv4 and IPv6 addresses, host names, and FQDNs)
2 Message Type (Trap, Inform)
3 SNMP protocol version (v1, v2c, v3)
4 Port (the default is 162)
Disabling the checkbox next to the Port setting disables the corresponding Destination
Address.
Use a Provisioning Service
If your organization uses a Polycom CMA system, RealPresence Resource Manager system, or BroadSoft
BroadWorks® Device Management System (DMS) system, you can manage Polycom RealPresence Group
systems in dynamic management mode. In dynamic management mode, the following might be true:
● Polycom RealPresence Group systems are registered to a standards-based presence service, so
presence states are shared with Contacts.
● Polycom RealPresence Group systems have access to a corporate directory that supports LDAP
access.
 The Domain, User Name, Password, and Server Address fields are populated on the Provisioning
Service screen.
 Configuration settings that are provisioned, or that are dependent on provisioned values, are
read-only on the RealPresence Group system.
 The Polycom RealPresence Group system checks for new software from the provisioning service
every time it restarts and at an interval set by the service. It automatically accesses and runs any
software updates made available by the service.
 A provisioning service system administrator can upload a provisioned bundle from an already
configured RealPresence Group system. When RealPresence Group systems request
provisioning, the provisioned bundle and any automatic settings are downloaded. A
RealPresence Group system user with administrative rights can change the settings on the
RealPresence Group system after the provisioned bundle is applied. If you later download a new
provisioned bundle from the provisioning service, the new bundle overwrites the manual settings.
Polycom, Inc.
154
Manage the System Remotely
● If the system has previously registered successfully with a provisioning service but fails to detect the
service when it restarts or checks for updates, an alert appears on the System Status screen. If the
system loses registration with the provisioning service, it continues operating with the most recent
configuration that it received from the provisioning service.
● If a Polycom Touch Control is connected to a provisioned RealPresence Group system, a CMA or
RealPresence Resource Manager system can receive status updates from and provide software
updates to the Polycom Touch Control. For supported CMA and RealPresence Resource Manager
versions, go to
http://support.polycom.com/PolycomService/support/us/support/service_policies.html and click the
Current Interoperability Matrix link.
● See the Current Interoperability Matrix at for supported CMA and RealPresence Resource Manager
versions.
● When you enable provisioning with a BroadWorks DMS, the RealPresence Group system uses the
Link Layer Discovery Protocol (LLDP) to discover the video conference Virtual LAN (VLAN) that is
configured on the network and places the system in the VLAN. In the VLAN, you can use domain
name server (DNS) service (SRV) record lookup to discover the provisioning server. Keep in mind
that the DNS service record lookup and the provisioning server run on different network layers,
independently from each other.
If you use BroadSoft DMS provisioning, keep in mind the following points:
● Bundled provisioning is not supported.
● Provisioning uses the same XML-based profile used for dynamic provisioning.
● Provisioned fields are read only.
Enable or Disable the Provisioning Service
You can register the Polycom RealPresence Group system with the Polycom CMA or RealPresence
Resource Manager system in several ways:
● If the system detects a provisioning service on the network while running the setup wizard, it prompts
you to enter information for registration with the service.
The setup wizard is available during initial setup, after a system reset with system settings deleted,
or after using the restore button. For information about configuring the Polycom CMA or
RealPresence Resource Manager system so that Polycom RealPresence Group systems detect and
register with it, refer to the Polycom CMA System Operations Guide or the Polycom RealPresence
Resource Manager System Operations Guide.
● You can enter the registration information and attempt to register by going to the Admin Settings in
the Polycom RealPresence Group system web interface.
To enable and configure a provisioning service in the Admin Settings:
1 In the web interface, go to Admin Settings > Servers > Provisioning Service.
2 Select the Enable Provisioning setting.
3 Configure these settings for automatic provisioning. Multiple Polycom RealPresence Group systems
can be registered to a single user.
When available, the RealPresence Group system completes the fields mentioned in step 4. If the
system does not complete the fields automatically, get this information from your network
administrator.
Polycom, Inc.
155
Manage the System Remotely
Setting
Description
Server Type
Specifies the type of provisioning server. Select CMA/RPRM or DMS.
Domain Name
Specifies the domain for registering to the provisioning service.
User Name
Specifies the endpoint’s user name for registering to the provisioning service.
Password
Specifies the password that registers the system to the provisioning service.
Server Address
Specifies the address of the system running the provisioning service.
4 Select Save or Update. The system tries to register with the Polycom CMA, RealPresence
Resource Manager, or DMS system using NTLM authentication.
Note: Troubleshoot provisioning registration
If automatic provisioning is enabled but the system does not register successfully with the
provisioning service, you might need to change the Domain, User Name, Password, or Server
Address used for registration. For example, users might be required to periodically reset passwords
used to log into the network from a computer. If such a network password is also used as the
provisioning service password, you must update it on the Polycom RealPresence Group system, too.
To avoid unintentionally locking a user out of network access in this case, RealPresence Group
systems do not automatically retry registration until you update the settings and register manually on
the Provisioning Service page.
To disable a provisioning service:
1 In the web interface, go to Admin Settings > Servers > Provisioning Service.
2 Disable the Enable Provisioning setting.
Set Up Multitiered Directory Navigation
You can use the RealPresence Resource Manager to navigate the RealPresence Group system directories
or contacts. Contacts are displayed in a hierarchical format, where you can select the top directory and
search for contacts within each level of the directory hierarchy.
This feature is supported using a RealPresence Resource Manager server (LDAP) and does not include
standalone LDAP servers or other global directory servers.
The following limitations apply to this feature:
● You can use RealPresence Resource Manager 7.1 and higher only.
● You can search and navigate up to three directory levels.
● You cannot use Polycom Touch Control to navigate the RealPresence Group system LDAP
directories.
● This feature is supported on dynamically-managed RealPresence Group systems only.
To use multitiered directory navigation, you must configure the following web interface settings:
● Go to Admin Settings > Servers > Directory Servers and make selections for each setting. For
more information about these settings, refer to the Set Up a Directory Server.
● Go to Admin Settings > Servers > Provisioning Service and enable provisioning. For more
information about these settings, refer to Enable or Disable the Provisioning Service.
Polycom, Inc.
156
Manage the System Remotely
Keep your Software Current
You can update your Polycom RealPresence Group system by going to support.polycom.com, navigating
to Documents and Downloads > Telepresence and Video, and then downloading and installing the
appropriate software. You can download and install software for the Polycom Touch Control, with no
software or options key codes. You can also download and install Polycom Touch Control software from a
web server.
You can also have your system automatically check for and apply software updates.
To automatically check for and apply software updates:
1 In the web interface, go to Admin Settings > General Settings > Software Updates.
2 Select Automatic Software Updates.
3 Configure these settings.
Setting
Description
Automatically
Check for and
Apply Software
Updates
Enables settings that allow you to set up a schedule for automatically checking for and
applying software updates to your system.
Start Time
Specifies the Hour, Minute, and AM/PM setting to start checking for updates.
Duration
Specifies how long the system should wait to determine whether updates are available.
For information about the latest software version, including version dependencies, refer to the Polycom
RealPresence Group Series Release Notes. For detailed information about obtaining software key codes
and updating your software, refer to theSoftware and Options for the Polycom RealPresence Group Series
and Accessories Installation Guide.
Note: Automatic software updates
If your organization uses a management system for provisioning endpoints, your Polycom
RealPresence Group system might get software updates automatically.
Polycom, Inc.
157
Control and Navigation
You can customize how the remote control works, set up various controllers for the system, and set the date
and time on your system. See the following topics for more information:
● Configure Remote Control Behavior
● Connect Control and Accessibility Equipment
● Set Up the Polycom Touch Control
● Enable SmartPairing
● Configure Contact Information
● Configure Regional Settings
● Configure Sleep Settings
Configure Remote Control Behavior
You can customize the behavior of the remote control to support the user’s environment. Keep in mind the
following regarding remote control behavior:
● If the Polycom RealPresence Group system is paired and connected with a Polycom Touch Control,
the remote control is disabled.
● The Polycom RealPresence Group system remote control IR transmits a modulated frequency of
38 kHz.
● When a USB keyboard is connected to a RealPresence Group system, you can enter only numbers
with the remote control on the local interface's Place a Call > Keypad or Place a Call > Contacts
screens.
To configure remote control behavior:
1 In the web interface, go to Admin Settings > General Settings > System Settings > Remote
Control, Keypad, and Power.
2 Configure these settings.
Setting
Description
Keypad Audio
Confirmation
Specifies whether to play a voice confirmation of numbers selected with the remote
control or keypad.
Numeric Keypad Function
Specifies whether pressing number buttons on the remote control or keypad moves
the camera to presets or generates touch tones (DTMF tones). If this is set to
Presets, users can generate DTMF tones by pressing the # key on the remote
while on a video screen.
Polycom, Inc.
158
Control and Navigation
Setting
Description
Use Non-Polycom Remote
Configures the system to accept input from a programmable, non-Polycom remote
control. In most cases the Polycom remote works as designed, even when this
feature is enabled. However, try disabling this feature if you experience difficulty
with the Polycom remote. For more information about Polycom RealPresence
Group system IR codes, refer to the Polycom RealPresence Group Series
Integrator Reference Guide.
Channel ID
Specifies the IR identification channel to which the Polycom RealPresence Group
system responds. Set the Channel ID to the same channel as the remote control.
The default setting is 3. If the remote control is set to channel 3, it can control a
Polycom RealPresence Group system set to any Channel ID. For more information
about changing this setting, refer to Configure the Remote Control Channel ID.
Hang-up Button Long
Press
Specifies the behavior of the remote control Hang-up button when you press it for a
long time:
• Hang-up / Power Off—Holding down the Hang-up button powers off the
RealPresence Group system.
Note: The Power Off functionality is supported only on RealPresence Group
550 systems with hardware version 2 and later.
• Hang-up / Sleep—Holding down the Hang-up button puts the system to sleep.
• Hang-up Only—Holding down the Hang-up button has no function other than
hanging up the call.
# Button Function
Specifies the behavior of the # button on the remote control:
• #, then @—Pressing the # button once on the keypad displays the hash sign.
Pressing the # button twice, quickly, displays the commercial at (@) symbol.
• @, then #—Pressing the # button once on the keypad displays the @ symbol.
Pressing the # button twice, quickly, displays the # sign.
Configure the Remote Control Channel ID
You can configure the Channel ID so that the remote control affects only one Polycom RealPresence Group
system, even if other systems are in the same room.
Note: Touch Control set to channel 3
The Polycom Touch Control virtual remote control is always set to channel 3.
If the remote control is set to channel 3, it can control a Polycom RealPresence Group system set to any
Channel ID. If the system does not respond to the remote control, set the remote control channel ID to 3
starting with step 3 in the following procedure. Then follow the entire procedure to configure the system and
remote control channel ID settings.
Note: Do not block IR signal from remote
While performing these procedures, blocking the IR signal from the remote control can prevent the
signal from being received by the system, causing the system to take an action that corresponds to
any of the remote control button presses.
Polycom, Inc.
159
Control and Navigation
To configure the channel ID on the remote control:
1 While blocking the IR signal from the remote control using your hand or some other object, press
and hold
and
for 2-3 seconds.
2 After the red LED on the remote control comes on, release both keys. The LED remains lit for 10
seconds.
3 While the LED is lit, enter a 2-digit ID between 00 and 15.
If you do not enter the ID during the 10 seconds the LED is lit, the LED flashes six times and you must
repeat steps 1 and 2. Be sure to enter the ID during the next 10-second window.
4 If the channel ID is saved successfully, the LED flashes twice. Otherwise, the LED flashes six times
and you must repeat steps 1 - 3.
To confirm the channel ID from the remote control:
1 While blocking the IR signal from the remote control using your hand or some other object, press
and hold
and
for 2-3 seconds.
2 After the LED on the remote control comes on, release both keys. The LED remains lit for 10
seconds.
3 While the LED is lit, enter the 2-digit ID between 00 and 15 that you believe is the channel ID.
If you do not enter the ID during the 10 seconds the LED is lit, the LED flashes six times and you must
repeat steps 1 and 2. Be sure to enter the ID during the next 10-second window.
4 If you entered the current channel ID, the LED flashes twice. Otherwise, the LED flashes six times
and allows you to repeat step 3.
To configure the channel ID for a Polycom RealPresence Group system and remote control
in the web interface:
1 Go to Admin Settings > General Settings > System Settings > Remote Control, Keypad, and
Power.
2 Select the Channel ID.
3 Click Save.
The channel ID must be the same on the remote control and in the web interface.
Connect Control and Accessibility Equipment
The RealPresence Group 300, RealPresence Group 310, RealPresence Group 500, and RealPresence
Group 550 systems provide one serial port to allow you to control the system through a touch-panel using
the API.
The RealPresence Group 700 system also provides one serial port, but depending on your system’s
capabilities, you might be able to use the RS-232 serial port to control the system through a touch panel
using the API.
Make sure that the system is powered off before you connect devices to it.
Polycom, Inc.
160
Control and Navigation
Connect Non-Polycom Touch Panel Controls
As part of a custom room installation, you can connect an AMX or Crestron control panel to a Polycom
RealPresence Group system RS-232 serial port. To get started, complete these two main tasks:
● Program the control panel. Refer to the Polycom RealPresence Group Series Integrator Reference
Guide for information about the API commands.
● Set the desired Login Mode for the control panel on the RealPresence Group system. For information
on the available settings for Login Mode, see Configure RS-232 Serial Port Settings.
Configure RS-232 Serial Port Settings
To configure RS-232 serial port settings:
1 In the web interface, go to Admin Settings > General Settings > Serial Ports.
2 Configure these settings in the sections on the Serial Ports page.
Setting
Description
RS-232 Mode
Specifies the mode used for the serial port. Available settings depend on the Polycom
RealPresence Group system model.
• Off—Disables the serial port.
• Pass Thru—Passes data to an RS-232 device, such as a serial printer or certain types
of medical devices, connected to the serial port of the far-site system. Only available in
point-to-point calls.
• Closed Caption—Receives closed captions from a dial-up modem or a stenographer
machine through the RS-232 port.
• Camera Control—Passes data to and from a third-party camera. For more information
about using third-party cameras, refer to Configure a Third-Party Camera.
• Control—Receives control signals from a touch-panel control. Allows any device
connected to the RS-232 port to control the system using API commands.
Note: If you have a RealPresence Group 300, RealPresence Group 310, or RealPresence
Group 500 system, use only the Polycom serial cable with part number 2457-63542-001 to
connect devices to the RS-232 serial port.
Baud Rate, Parity,
Data Bits, Stop Bits
Set these to the same values that they are set to on the serial device.
RS-232 Flow
Control
This setting works with RS-232 modes that are not currently available. The setting is not
currently configurable.
Login Mode
Specifies the credentials necessary for a control system to connect to the RS-232 port.
• adminpassword—Requires the admin password, if one has been set, when the control
system connects. (default)
• usernamepassword—Requires the user name and the admin password, if one has
been set, when the control system connects.
• none—No user name or password is required when the control system connects.
Note: This setting only displays when RS-232 Mode is set to Control.
Polycom, Inc.
161
Control and Navigation
Set Up the Polycom Touch Control
The Polycom Touch Control allows you to control a Polycom RealPresence Group system.
Follow these steps to get started with the Polycom Touch Control. Refer to the Setting Up the Polycom
Touch Control and Polycom RealPresence Group Series and Accessories Install Software and Options
documents for more information.
To set up the Polycom Touch Control device:
1 Ensure that the correct software is installed on the Polycom RealPresence Group system that you
want to control, and that you have completed the setup wizard on the system.
Refer to Polycom RealPresence Group Series and Accessories Install Software and Options for more
information about updating the Polycom Touch Control software.
2 Connect the Ethernet cable to the underside of the Polycom Touch Control.
3 If you intend to use the Polycom Touch Control to show content from a computer, connect the USB
cable to the underside of the Polycom Touch Control.
4 If you want to connect the stand, route the Ethernet and USB cables through the opening in the
stand. Then attach the stand to the Polycom Touch Control by tightening the mounting screw with a
screwdriver.
5 Plug the Ethernet cable into the wall outlet:
 If your room provides Power Over Ethernet, you can connect the Ethernet cable directly to a LAN
outlet.
 If your room does not provide Power Over Ethernet, you must connect the Ethernet cable to the
power supply adapter. Then connect the power supply adapter to a LAN outlet and power outlet.
The Polycom Touch Control powers on and displays the language selection screen.
6 Choose your language and follow the onscreen instructions to pair the Polycom Touch Control with
your RealPresence Group system, or select Pair Later on the Pairing screen to skip pairing.
7 After the Polycom Touch Control connects to the network, enter the RealPresence Group system IP
address and touch Connect. By default, the IP address of the RealPresence Group system is
displayed on the bottom of its Home screen. If the RealPresence Group system is configured to
allow pairing and you enter the IP address for the system correctly, the Touch Control displays a
prompt for the Polycom RealPresence Group system admin user ID and password.
When the Polycom Touch Control has paired and connected with the RealPresence Group system,
the Polycom Touch Control displays a success message, and the menus on the RealPresence Group
system monitor become unavailable. For more information about pairing, refer to Pair on page 163.
Pair and Unpair a Polycom Touch Control Device and a
Polycom RealPresence Group System
When you configure the Polycom Touch Control to pair with a particular Polycom RealPresence Group
system, the Polycom Touch Control makes an IP connection to the RealPresence Group system. If the
connection is lost for any reason, the Polycom Touch Control automatically attempts to restore the
connection.
The Polycom Touch Control connects to the RealPresence Group system over a TLS socket, providing a
reliable, secure communication channel between the two systems. The Polycom Touch Control initiates all
pairing connections and attaches to port 4122 on the RealPresence Group system.
Polycom, Inc.
162
Control and Navigation
You can pair the Polycom Touch Control and Polycom RealPresence Group system during initial Polycom
Touch Control setup, as described in the steps on the previous page.
After you have completed Polycom Touch Control setup, you can pair to a different RealPresence Group
system using Polycom Touch Control settings and unpair using the web interface.
When you use a Polycom Touch Control with the Polycom RealPresence Group system, you must be sure
to update the RealPresence Group software before you update the Polycom Touch Control software. Only
Polycom Touch Control software versions 4.x or later work with Polycom RealPresence Group systems.
The following table describes the pairing states:
State
Description
Paired
The Polycom Touch Control is successfully connected to the Polycom RealPresence
Group system through the pairing process, including providing the Polycom
RealPresence Group admin ID and password. A single Polycom Touch Control can be
paired to multiple Polycom RealPresence Group systems and, once paired, the
Polycom Touch Control can switch between RealPresence Group systems without
needing to enter admin IDs or passwords.
Unpaired
The ability to pair or connect to the Polycom Touch Control is disabled on the Polycom
RealPresence Group system. The only way to unpair is to follow the procedure
described in Unpair.
Connected
A Polycom Touch Control has an active pairing connection to the Polycom
RealPresence Group system. A single Polycom Touch Control can be paired to multiple
Polycom RealPresence Group systems, but can be connected to only one
RealPresence Group system at a time.
Disconnected
The Polycom Touch Control does not have an active pairing connection to an
RealPresence Group system, but is still paired if at least one RealPresence Group
system that has previously paired with the Polycom Touch Control has not unpaired.
Pair
To pair the Polycom Touch Control and Polycom RealPresence Group system during
setup:
» After selecting a language, enter the RealPresence Group system IP address in the Polycom Touch
Control interface and touch Connect.
Note: Pairing after setup
If you do not want to pair during setup, select Pair Later. If you choose to skip pairing, many Polycom
Touch Control features are not available. You can pair at a later time.
To pair the Polycom Touch Control and Polycom RealPresence Group system after setup,
using the Polycom Touch Control:
1 On the Polycom Touch Control Home screen, touch System.
2 Scroll to Device Connection Status and then touch
system.
Info next to the RealPresence Group
3 Touch View Pairing Settings.
Polycom, Inc.
163
Control and Navigation
4 Change the RealPresence Group system IP address and touch Connect.
To pair the Polycom Touch Control and Polycom RealPresence Group system after setup,
using the Polycom RealPresence Group system web interface:
1 Go to Admin Settings > General Settings > Pairing > Polycom Touch Control.
2 Enable the Enable Polycom Touch Control setting.
After the RealPresence Group system and the Polycom Touch Control are paired, the Polycom
RealPresence Group system web interface and the Polycom Touch Control interface display information
about each other and about their connection status.
Unpair
You can unpair the Polycom Touch Control and RealPresence Group system using the web interface.
To unpair the Polycom Touch Control and Polycom RealPresence Group using the web
interface:
1 Go to Admin Settings > General Settings > Pairing > Polycom Touch Control.
2 Disable Allow Pairing or select Forget this Device.
The RealPresence Group system cannot pair with any Polycom Touch Control while Allow Pairing is
disabled.
Remote Management of the Polycom Touch Control
You can remotely manage certain features of your Polycom Touch Control from within your enterprise
environment using Microsoft Internet Explorer version 9 and higher.
To open the remote management window for the Touch Control:
1 In one of the supported web browser windows, enter the IP address of the Touch Control.
2 In the Login window, enter the ID and Password you use to access the administrative features of
the Touch Control.
You can access the remote management features by using the Dashboard or the Navigation menu.
You return to the Dashboard by clicking the Home icon.
This list describes the features you can manage remotely:
● Download Logs: Downloads the Touch Control logs to the location specified in the device.
● Network Settings: Specifies whether the system acquires an IP address automatically or manually.
With the manual method, the other settings that are available from the Touch Control become
available on the web.
● Pair: Pairs and unpairs from Polycom RealPresence Group systems. Before you can connect to or
pair with a device, you must know the device’s IP Address and the User Name and Password used
to connect.
● Security: Changes the admin ID and password of the Touch Control.
● Software Updates: Updates the Polycom Touch Control software. You can update from the default
Polycom server or your own server by entering the appropriate IP address. You can configure the
updates to occur automatically or manually.
Polycom, Inc.
164
Control and Navigation
● View Touch Control Screens: Shows the screen currently being displayed on the Polycom Touch
Control. You can click Refresh at any time to see if the screen has changed.
Enable SmartPairing
SmartPairing allows you to detect and pair a RealPresence Group system from the RealPresence Mobile
application on an Android or Apple iPad tablet. After you pair the application and the RealPresence Group
system, you can use the RealPresence Mobile application to perform two basic functions:
● Use the application as a remote control for the RealPresence Group system.
● Swipe to transfer a call from the RealPresence Mobile application to the RealPresence Group
system.
Be aware that telnet must be enabled before you can use SmartPairing. Because telnet is disabled by
default in all Security Profiles, SmartPairing is also disabled by default. The setting to enable telnet is not
configurable when the Security Profile is set to Maximum or High.
Security Profiles and SmartPairing
Security Profile
Telnet Setting Default
SmartPairing Available?
Maximum / High
Disabled, Not Configurable
No
Medium / Low
Disabled, Configurable
Yes. To use SmartPairing, do the following:
1 Enable telnet.
2 Send API command or use web interface.
To configure SmartPairing:
1 In the web interface, go to Admin Settings > General Settings > Pairing > SmartPairing.
2 Configure these settings.
Setting
Description
SmartPairing Mode
Specifies the method used to pair with the RealPresence Group system, if SmartPairing is
enabled:
• Disabled
• Automatic
• Manual
Signal Volume
Specifies the relative signal strength of the ultrasonic signal within the loudspeaker audio
output signal.
Note: Viewing paired devices
View paired devices in Diagnostics > System > Sessions.
Polycom, Inc.
165
Control and Navigation
Configure Contact Information
You can configure contact information for your Polycom RealPresence Group system so that others know
who to call when they need assistance.
To configure system contact information:
1 In the web interface, go to Admin Settings > General Settings > My Information > Contact
Information.
2 Configure these settings.
Setting
Description
Contact Person
Specifies the name of the system administrator.
Contact Number
Specifies the phone number for the system administrator.
Contact Email
Specifies the email address for the system administrator.
Contact Fax
Specifies the fax number for the system administrator.
Tech Support
Specifies the name of the person who provides technical support.
City
Specifies the city where the system administrator is located.
State/Province
Specifies the state or province where the system administrator is located.
Country
Specifies the country where the system administrator is located.
Configure Regional Settings
You can configure regional settings for the Polycom RealPresence Group systems and for Polycom Touch
Control devices. To do so, refer to Configure RealPresence Group System Location Settings and Configure
Polycom Touch Control Regional Settings.
Configure RealPresence Group System Location Settings
To configure location settings:
1 In the web interface, go to Admin Settings > General Settings > My Information > Location.
2 Configure these settings.
Setting
Description
Country
Specifies the country where the system is located.
Changing the country automatically adjusts the country code associated with your system.
Country Code
Displays the country code associated with the country where the system is located.
Polycom, Inc.
166
Control and Navigation
Configure RealPresence Group System Language Settings
To configure the Polycom RealPresence Group system language settings:
» Do one of the following:
 In the local interface, go to Settings > Administration > Location > Language and select the
language to use in the interface.
 In the web interface, go to Admin Settings > General Settings > Language and select the
language to use in the interface.
Configure RealPresence Group System Date and Time Settings
To configure the Polycom RealPresence Group system date and time settings:
1 Go to one of the following locations to configure these settings:
 In the local interface, go to Settings > Administration > Location > Date and Time.
 In the web interface, go to Admin Settings > General Settings > Date and Time > System
Time.
2 Configure these settings.
Setting
Description
Date Format
Specifies how the date is displayed in the interface.
Note: This a web-only setting.
Time Format
Specifies how the time is displayed in the interface.
Auto Adjust for
Daylight Saving
Time
Specifies the daylight saving time setting. When you enable this setting, the system clock
automatically changes for daylight saving time.
Note: This a web-only setting.
Time Zone
Specifies the time difference between GMT (Greenwich Mean Time) and your location.
Time Server
Specifies whether the connection to a time server is automatic or manual for system time
settings. You can also select Off to enter the date and time yourself.
Primary Time
Server Address
Specifies the address of the primary time server to use when Time Server is set to Manual.
Secondary Time
Server Address
Specifies the address of the time server to use when the Primary Time Server Address
does not respond. This is an optional field.
Current Date and
Current Time
•
•
If the Time Server is set to Manual or Auto, these settings are not displayed.
If the Time Server is set to Off, these settings are configurable.
3 In the web interface, go to Admin Settings > General Settings > Date and Time > Time in Call.
4 Configure these settings.
Polycom, Inc.
167
Control and Navigation
Setting
Description
Show Time in Call
Specifies the time display in a call:
• Elapsed Time—Displays the amount of time in the call.
• System Time—Displays the system time on the screen during a call.
• Off—Time is not displayed.
When to Show
Specifies when the time should be shown:
• Start of the call only—Displays only when the call begins.
• Entire call—Displays continuously throughout the call.
• Once per hour—Displays at the beginning of the hour for one minute.
• Twice per hour—Displays at the beginning of the hour and midway through the hour
for one minute.
Show Countdown
Before Next Meeting
This setting is displayed only when the calendaring service has been enabled.
When enabled, it displays a timer that counts down to the next scheduled meeting 10
minutes before that meeting. If a timer is already showing, the countdown timer replaces it
10 minutes before the next scheduled meeting.
Configure Polycom Touch Control Regional Settings
To configure the Polycom Touch Control regional settings:
1 From the Home screen touch
Administration.
2 Touch the Location tab.
3 Select a language from the Language menu.
4 Configure the following settings under Date and Time.
Setting
Description
Time Zone
Specifies the time difference between GMT (Greenwich Mean Time) and your location.
Time Server
Specifies connection to a time server for automatic Touch Control time settings.
The date and time must be manually reset every time the Touch Control restarts, in the
following cases:
• Time Server is set to Off.
• Time Server is set to Manual or Auto, but the Touch Control cannot connect to a time
server successfully.
Time Server Address
Specifies the address of the time server to use when Time Server is set to Manual.
Time Format
Specifies your format preference for the time display and lets you enter your local time.
Configure Sleep Settings
To configure when the system goes to sleep:
1 In the web interface, click Admin Settings > Audio/Video > Sleep > Sleep.
Polycom, Inc.
168
Control and Navigation
2 Select the number of minutes the system can be idle before it goes to sleep.
Polycom, Inc.
169
Diagnostics, Status, and Utilities
The Polycom RealPresence Group systems provide various tools and screens that allow you to review
information about calls made by the system, review network usage and performance, perform audio and
video tests, and send system messages. See the following topics for details:
● Polycom RealPresence Manageability Instrumentation Solution
● Diagnostics Screens
● Set Up System Logging
● Retrieve Log Files
● Call Detail Report (CDR)
Polycom RealPresence Manageability Instrumentation
Solution
The Polycom® RealPresence® Manageability Instrumentation solution simplifies management of Polycom
RealPresence video collaboration services.
Prior to the introduction of RealPresence Manageability Instrumentation, Simple Network Management
Protocol (SNMP) Management Information Base (MIB) and Syslog formats varied across Polycom endpoint
and infrastructure products. RealPresence Manageability Instrumentation now enables you to collect, store,
and export data in a consistent format across all Polycom endpoints, and hardware and software
infrastructure systems. Polycom video and collaboration environments and infrastructure that include the
Manageability Instrumentation solution capabilities are easier to monitor, operate, and secure.
Specifically, RealPresence Manageability Instrumentation equips your Polycom devices with two embedded
capabilities that enhance your ability to monitor them:
● The Polycom Unified Simple Network Management Protocol (SNMP) Management Information Base
(MIB) provides a consistent and unified data model and common format for all MIBs across Polycom
products. The new MIB enables you to translate data you collect with SNMP into a standardized
format so you can remotely monitor devices on a network. For more information setting up SNMP on
the system, see Set Up SNMP.
● The Polycom Unified System logging Syslog transport format provides a system log message format
compliant with RFC 5424 that enables you to log device events locally and remotely in a standardized
way. Monitoring system logs is especially useful for troubleshooting and security purposes. For more
information on setting up system logging, see Configure System Log Level and Remote Logging.
For detailed information on using the Manageability Instrumentation solution with your Polycom products,
see the Polycom RealPresence Manageability Instrumentation Solution Guide.
Polycom, Inc.
170
Diagnostics, Status, and Utilities
Diagnostics Screens
Use the system diagnostics screens to view call statistics, system status, and system log settings, as well
as download system logs and restart or reset the system.
Local Interface System Screens
Most diagnostic information is available in both the web and the local interface, but some of this information
is specific to one or the other interface. Read this section to learn how to find diagnostic information in the
local interface.
To access the Diagnostics screens on the local interface:
» Go to Settings > System Information.
The local interface System Information screen has the following choices:
● Information
● Status
● Diagnostics
● Call Statistics
Information
Diagnostic Screen
Description
System Detail
Displays the following system information:
• System Name
• Model
• Hardware Version
• System Software
• Serial Number
• MAC Address
• IP Address
Network
Displays the following network information:
• IP Address
• Host Name
• H.323 Name
• H.323 Extension (E.164)
• SIP Address
• Link-Local
• Site-Local
• Global Address
Usage
Displays the following usage information:
• Time in Last Call
• Total Time in Calls
• Total Number of Calls
Polycom, Inc.
171
Diagnostics, Status, and Utilities
Status
Diagnostic Screen
Description
Active Alerts
Displays the status of any device or service listed within the Status screens that has a
current status indicator of red. Alerts are listed in the order they occurred.
Call Control
Displays the status of the Auto-Answer Point-to-Point Video and Meeting Password
settings.
Audio
Displays the connection status of audio devices such as the microphones, SoundStation IP,
and SoundStructure.
EagleEye Director
Displays the connection status of the EagleEyeTM Director, if one is connected. If the
camera system is not connected or is not selected as the current camera source, this
choice is not visible on the screen.
LAN
Displays the connection status of the IP Network.
Servers
•
•
•
Log Management
Displays the status of the Log Threshold setting.
When a system device or service encounters a problem, you see an alert next to the
System button on the menu.
Always displays the Gatekeeper and SIP Registrar Server.
Displays the active Global Directory Server, LDAP Server, or Microsoft Server.
If enabled, displays the Provisioning Service, Calendaring Service, or Presence Service.
Diagnostics
Diagnostic Screen
Description
Near End Loop
Tests the internal audio encoders and decoders, the external microphones and speakers,
the internal video encoders and decoders, and the external cameras and monitors.
Monitor 1 displays the video and plays the audio that would be sent to the far site in a call.
This test is not available when you are in a call.
PING
Tests whether the system can establish contact with a far-site IP address that you specify.
PING returns abbreviated Internet Control Message Protocol results. It returns H.323
information only if the far site is configured for H.323. It returns SIP information only if the
far site is configured for SIP.
If the test is successful, the Polycom RealPresence Group system displays a message.
Trace Route
Tests the routing path between the local system and the IP address entered.
If the test is successful, the Polycom RealPresence Group system lists the hops between
the system and the IP address you entered.
Color Bars
Tests the color settings of your monitor for optimum picture quality.
If the color bars generated during the test are not clear, or the colors do not look correct,
the monitor needs to be adjusted.
Polycom, Inc.
172
Diagnostics, Status, and Utilities
Diagnostic Screen
Description
Speaker Test
Tests the audio cable connections. A 473 Hz audio tone indicates that the local audio
connections are correct.
If you run the test from the system during a call, the far site will also hear the tone.
If you run the test from the Polycom RealPresence Group system web interface during a
call, the people at the site you are testing will hear the tone, but you will not.
Audio Meter
Measures the strength of audio signals from the microphone or microphones, far-site
audio, VCR audio, and any device connected to the audio line in.
• To check the microphone or microphones, speak into the microphone.
• To check far-site audio, ask a participant at the far site to speak or call a phone in the
far-site room to hear it ring.
The Audio Meters indicate peak signal levels. Set signal levels so that you see peaks
between +3dB and +7dB with normal speech and program material. Occasional peaks of
+12dB to +16dB with loud transient noises are considered acceptable. A meter reading of
+20dB corresponds to 0dBFS in the Polycom RealPresence Group system audio. A signal
at this level is likely clipping the audio system.
Meters function only when the associated input is enabled.
Note: Some audio meters are unavailable when a SoundStructure digital mixer is
connected to the Polycom RealPresence Group system.
Camera Tracking
Provides diagnostics specific to the EagleEye Director.
Audio
Verifies microphone functionality. To use this feature, speak aloud and verify that you can
see dynamic signal indications for two vertical microphones and five horizontal
microphones. If no signal indication appears for a specific microphone, manually power off
the EagleEye Director and then power it back on.
Also verifies the reference audio signal: Set up a video call. Let the far side speak aloud
and verify that you can see dynamic signal indications for the two reference audio meters.
If no signal indication appears for a specific microphone, make sure the reference cable is
connected firmly.
After you verify microphone functionality, calibrate the camera again.
Video
• Left Camera shows video from the left camera.
• Right Camera shows video from the right camera.
• Color Bars displays the color bar test screen.
Note: If the EagleEye Director is connected but is not selected as the current camera
source, this choice is not visible on the screen.
Polycom, Inc.
173
Diagnostics, Status, and Utilities
Diagnostic Screen
Description
Sessions
Displays the following information about each session connected to the system:
• Type
• User ID
• Remote Address
Reset System
Returns the system to its default settings. When you select this setting using the remote
control, you have the option to do the following:
• Keep your system settings (such as system name and network configuration) or restore
system settings.
• Keep or delete the directory stored on the system. System reset does not affect the
global directory.
• Keep or delete all PKI certificates and certificate revocation lists (CRLs).
You might want to download the CDR and CDR archive before you reset the system. Refer
to Call Detail Report (CDR).
Note: If a room password is configured for the admin account, you must enter it to reset the
system.
Web Interface Diagnostics Screens
Call statistics are displayed in one format when you are in point-to-point calls and another when you are in
multipoint calls. Most diagnostic information is available in both the web and the local interface, but some
of this information is specific to one or the other interface. Read this section to learn how to find diagnostic
information in the web interface.
Note: Diagnostics for EagleEye Director
If an EagleEye Director camera system is connected to your RealPresence Group system but is not
selected as the current camera source, the Diagnostics selection is not available in the left navigation
panel. To view the Diagnostics selection, ensure that the EagleEye Director is selected as the current
camera source.
To access the Diagnostics screens using the Polycom RealPresence Group system web
interface:
1 In your web browser address line, enter the RealPresence Group system’s IP address.
2 Enter the Admin ID as the user name (default is admin), and enter the Admin Remote Access
Password, if one is set.
3 Click Diagnostics from any page in the web interface.
You can find some system information by clicking the System link in the blue bar at the top of the page.
The web interface’s Diagnostics page has the following groups of settings in addition to the Send a Message
application:
● System
● Audio and Video Tests
Polycom, Inc.
174
Diagnostics, Status, and Utilities
System Diagnostics
Diagnostic Screen
Description
Call Statistics
Displays information about the call in progress. What you see depends on whether you are
in a point-to-point or multipoint call.
• Point-point calls: Streams associated with the participant are displayed beneath the
participant information. To view more information about a specific stream, navigate to
the desired stream and select More Info. From an individual stream view you can select
Next Stream to view the next stream in the stream list.
• Multipoint calls: A list of participants in the call is displayed. Do one of the following:
 To view a participant’s details, select Participants, navigate to the desired
participant, and select More Info.
 The participants’ active streams are displayed beneath the participant information.
To view more information about a specific stream, navigate to the desired stream
and select More Info. From an individual stream view you can select Next Stream
to view the next stream in the stream list.
 To quickly access a list of all active audio, video and content streams within the call,
navigate to Active Streams (this option is available in SVC calls only). Select the
desired stream, and select More Info.
If the system is not in a call, the page displays The System is not currently in a call.
System Status
Displays the following system status information:
• Auto-Answer Point-to-Point Video, Remote Control, and Meeting Password
• Microphones, SoundStation IP, SoundStructure
• IP Network
• Servers:
 Always shows: Gatekeeper, SIP Registrar Server
 Shows the active Global Directory Server, LDAP Server, or Microsoft Server
 If enabled, shows Provisioning Service, Calendaring Service, Presence Service
If the Polycom RealPresence Group system detects an EagleEye Director, a status line for
the device is displayed.
Download Logs
Enables you to save system log information.
System Log Settings
•
•
•
•
Restart System
Instructs the system to restart (system reboot).
Sessions
View information about everyone logged in to the RealPresence Group system.
Specifies the Log Level to use.
Enables Remote Logging, H.323 Trace, and SIP Trace.
Specifies the Remote Log Server Address.
Allows you to Send Diagnostics and Usage Data to Polycom, and get information about
the Polycom Improvement Program.
The following table describes the information you see when you click More Info on the Call Statistics page.
Polycom, Inc.
175
Diagnostics, Status, and Utilities
Call Statistics “More Info”
Participant information
• System name
• System number
• System information
• Call speed (send and receive)
• Call type
• Encryption
Participant streams
• Stream ID; possible stream IDs include Audio TX, Audio RX, Video TX, Video RX, Content TX, and Content RX
• Stream quality indicator; possible colors are green, yellow, and red.
• Protocol in use
• Format in use
• Data rate in use
• Frame rate in use
• Number of packets lost and percentage packet loss in IP calls
• Jitter in IP calls
• Encryption type, key exchange algorithm type, and key exchange check code (if the encryption option is enabled
and the call is encrypted)
• Error concealment type, such as lost packet recovery (LPR), retransmission, or dynamic bandwidth allocation
(DBA)
View Call Statistics Using the Polycom Touch Control
Call statistics are also available during a call when your system is paired with the Polycom Touch Control.
To view information about a point-to-point call in progress:
1 Touch Participants.
Participant information is displayed.
2 Touch View Call Statistics.
Streams associated with the participant are displayed beneath the participant information. To view
more information about a specific stream, navigate to the desired stream and touch
. From an
individual stream view you can touch Next Stream to view the next stream in the list.
To view information about a multipoint call in progress:
1 Touch Participants.
A list of participants in the call is displayed.
2 Touch View Call Statistics and do one of the following:
 To view a participant’s details, navigate to the desired participant, and touch
.
 The participants’ active streams are displayed beneath the participant information. To view more
information about a specific stream, navigate to the desired stream and touch
. From an
individual stream view you can select Next Stream to view the next stream in the stream list.
Polycom, Inc.
176
Diagnostics, Status, and Utilities
 To quickly access a list of all active audio, video, and content streams within the call, navigate to
Active Streams (this option is available in SVC calls only). Select the desired stream, and touch
.
Audio and Video Tests
Diagnostic Screen
Description
Speaker Test
Tests the audio cable connections. A 473 Hz audio tone indicates that the local audio
connections are correct.
If you run the test from the system during a call, the far site will also hear the tone.
If you run the test from the RealPresence Group system web interface during a call, the
people at the site you are testing will hear the tone, but you will not.
Audio Meter
Measures the strength of audio signals from the microphone or microphones, far-site
audio, VCR audio, and any device connected to the audio line in.
• To check the microphone or microphones, speak into the microphone.
• To check far-site audio, ask a participant at the far site to speak or call a phone in the
far-site room to hear it ring.
The Audio Meters indicate peak signal levels. Set signal levels so that you see peaks
between +3dB and +7dB with normal speech and program material. Occasional peaks of
+12dB to +16dB with loud transient noises are considered acceptable. A meter reading of
+20dB corresponds to 0dBFS in the Polycom RealPresence Group system audio. A signal
at this level is likely clipping the audio system.
Meters function only when the associated input is enabled.
Note: Some audio meters are unavailable when a SoundStructure digital mixer is
connected to the Polycom RealPresence Group system.
Camera Tracking
Provides diagnostics specific to the EagleEye Director.
Audio
Verifies microphone functionality. To use this feature, speak aloud and verify that you can
see dynamic signal indications for two vertical microphones and five horizontal
microphones. If no signal indication appears for a specific microphone, manually power off
the EagleEye Director and then power it back on.
Also verifies the reference audio signal: Set up a video call. Let the far side speak aloud
and verify that you can see dynamic signal indications for the two reference audio meters.
If no signal indication appears for a specific microphone, make sure the reference cable is
connected firmly.
After you verify microphone functionality, calibrate the camera again.
Video
• Left Camera shows video from the left camera.
• Right Camera shows video from the right camera.
• Color Bars displays the color bar test screen.
Note: If the EagleEye Director is connected but is not selected as the current camera
source, this choice is not visible on the screen.
Set Up System Logging
System log files are essential when troubleshooting system issues. System log files contain information
about system activities and the system configuration profile.
Polycom, Inc.
177
Diagnostics, Status, and Utilities
In order to set up system logging, you need to do the following tasks:
● Configure System Log Management
● Configure System Log Level and Remote Logging
After setting up system logging, you can retrieve a system log file. For details on how to get log files, refer
to Retrieve Log Files.
Configure System Log Management
When the system log fills up past the threshold, the following actions are triggered:
● Transfers the log to the USB device if Transfer Frequency is set to “Auto at Threshold”
● Creates a log entry indicating that the threshold has been reached
● Displays an alert on the home screen
● Displays an indicator on the System Status screen
To view the log file status, do one of the following:
● In the local interface, go to Settings > System Information > Status > Log Management.
● In the web interface, go to Diagnostics > System > System Status and select the More Info link
for Log Threshold.
Note: Log Threshold status when red
When the Log Threshold system status indicator is red, automatic log transfers cannot be completed
and data may be lost. You must manually transfer the logs to a USB device.
To configure system log management:
1 In the web interface, go to Admin Settings > Security > Log Management.
2 Configure these settings and click Save.
Setting
Description
Current Percent Filled
Displays how full the log file is, as a percentage of the total size.
Percent Filled Threshold
Specifies a threshold for the percent filled value. Reaching the threshold triggers an
alarm, creates a log entry, and transfers the log if Transfer Frequency is set to Auto
at Threshold. Off disables logging threshold notifications.
Folder Name
Specifies the name to give the folder for log transfers. Select one of the following:
• System Name and Timestamp—Folder name is the system name and the
timestamp of the log transfer, in the date and time format specified on the Location
screen. For example, if the system name is “Marketing”, the folder name could be
marketing_MMddyyyymmssSSS.
• Timestamp—Folder name is the timestamp of the log transfer, in the date and time
format specified on the Location screen, for example yyyyMMddhhmmssSSS.
• Custom—Optional folder name for manual log transfers.
Polycom, Inc.
178
Diagnostics, Status, and Utilities
Setting
Description
Storage Type
Specifies the type of storage device used for log file transfers.
Transfer Frequency
Specifies when the logs are transferred:
Manual—The transfer starts when you click the Start Log Transfer button, which is
visible only on the local interface. If the log fills before being transferred, new events
overwrite the oldest events.
Auto at Threshold—The transfer starts automatically when the Percent Filled
Threshold is reached.
Configure System Log Level and Remote Logging
The system log captures devices and server events in a consistent manner. You determine the log level,
whether to enable remote logging, and whether to log additional SIP or H.323 details.
To configure system log settings:
1 In the web interface, go to Diagnostics > System > System Log Settings.
2 Configure these settings.
Setting
Description
Log Level
Sets the minimum log level of messages stored in the Polycom RealPresence Group
system’s flash memory.
DEBUG logs all messages, and WARNING logs the fewest number of messages.
Polycom recommends leaving this setting at the default value of DEBUG.
When Enable Remote Logging is on, the log level is the same for both remote and local
logging.
Enable Remote
Logging
Specifies whether remote logging is enabled. Enabling this setting causes the Polycom
RealPresence Group system to send each log message to the specified server in
addition to logging it locally.
The system immediately begins forwarding its log messages when you click Save.
Remote logging encryption is supported when TLS transport is the transport protocol. If
you are using UDP or TCP transport, Polycom recommends remote logging only on
secure, local networks.
Remote Log Server
Address
Specifies the server address and port. If the port is not specified, a default destination
port is used. The default port is determined by the configured Remote Log Server
Transport Protocol setting as follows:
• UDP: 514
• TCP: 601
• TLS: 6514
The address and port can be specified in the following formats:
• IPv4 Address (Example: 10.11.12.13:<port>, where <port> is the optional destination
port number in the range 1..65535)
• IPv6 Address (Example: [2001::abcd:1234]:<port>, where <port> is the optional
destination port number in the range 1..65535)
• FQDN (Example: logserverhost.company.com:<port>, where <port> is the optional
destination port number in the range 1..65535)
Polycom, Inc.
179
Diagnostics, Status, and Utilities
Setting
Description
Remote Log Server
Transport Protocol
Specifies the type of transport protocol:
• UDP
• TCP
• TLS (secure connection)
Enable H.323 Trace
Logs additional H.323 connectivity information.
Enable SIP Trace
Logs additional SIP connectivity information.
Send Diagnostics
and Usage Data to
Polycom
Sends crash log server information to Polycom to help us analyze and improve the
product. Click the Polycom Improvement Program button to view information about
how your data is used.
Retrieve Log Files
There are several types of log files available that you might find useful when troubleshooting. Log files exist
for the RealPresence Group system, Polycom Touch Control, and EagleEye Director. These sections
explain how to retrieve those different log files:
● Download or Transfer System Log Files
● Transfer Polycom Touch Control Logs
● Transfer EagleEye Director Logs
Download or Transfer System Log Files
You can use the RealPresence Group system web interface or local interface to get system logs.
Note: Log entry times are GMT
The date and time of system log entries for RealPresence Group systems are shown in GMT.
To download a system log using the web interface:
1 Click Diagnostics > System > Download Logs.
2 Click Download system log and then specify a location on your computer to save the file.
In the dialog boxes that appear, designate where you want the file to be saved.
To transfer a system log using the local interface:
1 In the local interface, go to Settings > Administration > Security > Log Management.
2 Click Transfer System Log to USB Device.
3 The system saves a file in the USB named according to the settings you chose in the web interface.
4 Wait until the system displays a message that the log transfer has completed successfully before
you remove the storage device.
Polycom, Inc.
180
Diagnostics, Status, and Utilities
Transfer Polycom Touch Control Logs
You can transfer the Touch Control logs to an external USB storage device.
To transfer Polycom Touch Control logs:
1 Ensure that a USB device is connected to the USB port on the right side of the Polycom Touch
Control.
2 From the Home screen touch
Administration.
An admin ID and password might be configured for the Touch Control Administration settings. The
default ID is admin and the default password is 456.
3 Under Security, select Transfer Touch Control Logs to USB Device.
A popup message displays when the log transfer completes successfully.
Transfer EagleEye Director Logs
The Polycom EagleEye Director logs contain important status and debug information that is not included in
the logs available for the RealPresence Group system.
To download the log information to a USB device:
1 Attach a USB storage device formatted in FAT32 to the back panel of the EagleEye Director.
2 Restart the EagleEye Director by following these steps:
a Unplug the 12v adaptor attached to the side of the EagleEye Director.
b Wait a 5 seconds.
c Plug the 12v adaptor into the side of the EagleEye Director.
It could take up to two minutes for the EagleEye Director to restart.
3 Remove the USB storage device.
A log file using the name format of rabbiteye_info_XXXXX.tar.gz is generated on the USB
storage device.
Call Detail Report (CDR)
When enabled by going to Admin Settings > General Settings > System Settings > Recent Calls in the
Polycom RealPresence Group system web interface, the Call Detail Report (CDR) provides the system’s
call history. Within 5 minutes after ending a call, the CDR is written to memory and then you can download
the data in CSV format for sorting and formatting.
Every call is added to the CDR, whether it is made or received. If a call does not connect, the report shows
the reason. In multipoint calls, each far site is shown as a separate call, but all have the same conference
number.
The size of a CDR is virtually unlimited, but can become unmanageable if you don’t download the record
periodically. If you consider that 150 calls result in a CDR of approximately 50 KB, you might set up a
schedule to download and save the CDR after about every 1000 - 2000 calls just to keep the file easy to
download and view. Remember that your connection speed also affects how fast the CDR downloads.
Polycom, Inc.
181
Diagnostics, Status, and Utilities
To download the CDR using the web interface:
1 Click Utilities > Services > Call Detail Report (CDR).
2 Click Most Recent Call Report and then specify whether to open or save the file on your computer.
Information in the CDR
The following table describes the data fields in the CDR.
Data
Description
Row ID
Each call is logged on the first available row. A call is a connection to a single site, so there
might be more than one call in a conference.
Start Date
The call start date, in the format dd-mm-yyyy.
Start Time
The call start time, in the 24-hour format hh:mm:ss.
End Date
The call end date.
End Time
The call end time.
Call Duration
The length of the call.
Account Number
If Require Account Number to Dial is enabled on the system, the value entered by the user
is displayed in this field.
Remote System
Name
The far site’s system name.
Call Number 1
The number dialed from the first call field, not necessarily the transport address.
For incoming calls — The caller ID information from the first number received from a far site.
Call Number 2
(If applicable for
call)
For outgoing calls — The number dialed from the second call field, not necessarily the
transport address.
For incoming calls — The caller ID information from the second number received from a far
site.
Transport Type
The type of call — Either H.323 (IP) or SIP.
Call Rate
The bandwidth negotiated with the far site.
System
Manufacturer
The name of the system manufacturer, model, and software version, if they can be
determined.
Call Direction
In—For calls received.
Out—For calls placed from the system.
Conference ID
A number given to each conference. A conference can include more than one far site, so
there might be more than one row with the same conference ID.
Call ID
Identifies individual calls within the same conference.
Total H.320
Channels Used
Number of narrow-band channels used in the call.
Endpoint Alias
The alias of the far site.
Polycom, Inc.
182
Diagnostics, Status, and Utilities
Data
Description
Reserved
Polycom use only.
View Name
Names the web or local interface used in the call.
User ID
Lists the ID of the user who made the call.
Endpoint Transport
Address
The actual address of the far site (not necessarily the address dialed).
Audio Protocol (Tx)
The audio protocol transmitted to the far site, such as G.728 or G.722.1.
Audio Protocol (Rx)
The audio protocol received from the far site, such as G.728 or G.722.
Video Protocol (Tx)
The video protocol transmitted to the far site, such as H.263 or H.264.
Video Protocol (Rx)
The video protocol received from the far site, such as H.261 or H.263.
Video Format (Tx)
The video format transmitted to the far site, such as CIF or SIF.
Video Format (Rx)
The video format received from the far site, such as CIF or SIF.
Disconnect Local ID
and Disconnect
Reason
The identity of the user who initiated the call and the reason the call was disconnected.
Q.850 Cause Code
The Q.850 cause code showing how the call ended.
Total H.320 Errors
The number of H.320 errors experienced during the call.
Average Percent of
Packet Loss (Tx)
The combined average of the percentage of both audio and video packets transmitted that
were lost during the 5 seconds preceding the moment at which a sample was taken. This
value does not report a cumulative average for the entire H.323 call. However, it does report
an average of the sampled values.
Average Percent of
Packet Loss (Rx)
The combined average of the percentage of both audio and video packets received that
were lost during the 5 seconds preceding the moment at which a sample was taken. This
value does not report a cumulative average for the entire H.323 call. However, it does report
an average of the sampled values.
Average Packets
Lost (Tx)
The number of packets transmitted that were lost during an H.323 call.
Average Packets
Lost (Rx)
The number of packets from the far site that were lost during an H.323 call.
Average Latency
(Tx)
The average latency of packets transmitted during an H.323 call based on round-trip delay,
calculated from sample tests done once per minute.
Average Latency
(Rx)
The average latency of packets received during an H.323 call based on round-trip delay,
calculated from sample tests done once per minute.
Maximum Latency
(Tx)
The maximum latency for packets transmitted during an H.323 call based on round-trip
delay, calculated from sample tests done once per minute.
Maximum Latency
(Rx)
The maximum latency for packets received during an H.323 call based on round-trip delay,
calculated from sample tests done once per minute.
Polycom, Inc.
183
Diagnostics, Status, and Utilities
Data
Description
Average Jitter (Tx)
The average jitter of packets transmitted during an H.323 call, calculated from sample tests
done once per minute.
Average Jitter (Rx)
The average jitter of packets received during an H.323 call, calculated from sample tests
done once per minute.
Maximum Jitter (Tx)
The maximum jitter of packets transmitted during an H.323 call, calculated from sample
tests done once per minute.
Maximum Jitter (Rx)
The maximum jitter of packets received during an H.323 call, calculated from sample tests
done once per minute.
Call Priority
The AS-SIP call precedence level assigned to the call (populated only when AS-SIP is
enabled on the system).
Note: Screen saver when paired
When the Polycom RealPresence Group system is paired with a Polycom Touch Control, the screen
saver logo displays on the system monitor but not the Polycom Touch Control screen.
Polycom, Inc.
184
Troubleshoot
For more troubleshooting information, search the Knowledge Base at support.polycom.com.
Place a Test Call
When you finish configuring the system, you can call a Polycom video site to test your setup. You can find
a list of worldwide numbers that you can use to test your Polycom RealPresence Group system at
www.polycom.com/videotest.
If you have trouble making video calls:
● To find out if the problem exists in your system, ask the person you were trying to reach to call you
instead.
● Find out if the system you are calling has its power turned on and is functioning properly.
● If you can make calls but not receive them, make sure that your system is configured with the correct
IP address.
Reset a RealPresence Group System
If the system is not functioning correctly or you have forgotten the Admin Room Password, you can reset
the system with Delete System Settings enabled. This procedure effectively refreshes your system,
deleting all settings except the following one:
● Current software version
● Remote control channel ID setting
● Directory entries
● CDR data and logs
To reset the system using the local interface:
1 Go to Settings > System Information > Diagnostics > Reset System.
2 Enable Delete System Settings.
3 Click Reset System.
After about 15 seconds, the system restarts and displays the setup wizard.
Polycom, Inc.
185
Troubleshoot
Perform a Factory Restore on the Polycom
RealPresence Group System
You can use the hardware restore button on the Polycom RealPresence Group system to perform a factory
restore of the system. A factory restore completely erases the system and restores it to the software version
and default configuration stored in its factory partition.
The factory restore operation completely erases the system’s flash memory and reinstalls the software
version and default configuration stored in its factory partition.
The following items are not saved:
● Software updates
● All system settings including option keys and the remote control channel ID
● Directory entries
● CDR data
During a factory restore on the system or from a USB device, the LED indicator on the front of the system
blinks blue and amber.
Use the Restore Button for a Factory Restore
The restore button pinhole is on the bottom of the Polycom RealPresence Group 300, 310, and 500
systems, as shown in the following figure.
Restore button on RealPresence Group 300/500 systems
The restore button pinhole is on the front of the Polycom RealPresence Group 550 systems, as shown in
the following figure.
Polycom, Inc.
186
Troubleshoot
Restore button pinhole on RealPresence Group 550 systems
The restore button pinhole is on the front of the Polycom RealPresence Group 700 system, as shown in the
following figure.
Restore button on RealPresence Group 700 system
To reset the system to its factory partition software using the restore button:
1 Power off the system.
2 Straighten a paper clip and insert it into the pinhole.
3 Using the paper clip, press and hold the restore button.
4 While continuing to hold the restore button, press the power button once.
5 Keep holding the restore button for 10 more seconds, then release it.
During the factory restore process, the system displays the Polycom startup screen and the usual software
update screens on HDMI monitors. Other types of monitors will be blank. Do not power off the system during
the factory restore process. The system restarts automatically when the process is complete.
Use a USB Device for a Factory Restore
If you start a factory restore while a USB storage device is connected, the system restores from the USB
device instead of the system’s factory partition.
For about the first five minutes of the factory restore process, the system is erasing data on the SD card and
extracting data from the USB device. This process runs from a special memory partition and graphics are
not available, so your monitor will be blank.
Polycom, Inc.
187
Troubleshoot
If you prefer, you can have the system prepare the SD card by rewriting the data with zeroes and
reformatting the card, thereby eliminating any traces of old data. Be aware that this step adds about 20
minutes to the beginning of the factory restore process, when all you will see is a blank screen. You will
notice, however, that the LED indicator shows a fast blink of blue and amber lights during this process. The
lights blink normally during the rest of the restore process.
To reset the system to its factory partition software using a USB device:
1 Copy the build package (.tar file) and the sw_keys.txt file to the root directory of a USB device.
2 (Optional) Create a text file named zeroize.txt on the root directory of the USB device, then edit
the file by entering the word TRUE in all capital letters.
If the zeroize.txt file contains the word FALSE, or if the file is not in the root directory of the USB
device, the system uses the standard method of erasing data from the SD card.
3 Power down the system and plug the USB device into your system.
4 While holding the restore button, press the power button once.
5 Keep holding the restore button for 10 more seconds, then release it.
The software version of the update file on the USB device is displayed in the web interface.
6 Click Start Update to begin the factory restore.
After the SD card is prepared, the system displays the Polycom startup screen and the usual software
update screens on HDMI monitors. Other types of monitors will be blank. Do not power off the system during
the factory restore process. The system restarts automatically when the process is complete.
Delete Files
You can remove customer data and configuration information from the system for security purposes.
To perform a logical delete of the system files:
1 Power off the RealPresence Group 300, 310, 500, and 700 systems by holding down the Power
sensor for 3 to 5 seconds. For RealPresence Group 550 systems, power off the systems using the
power switch.
2
Unplug all network connections.
3 Perform a factory restore.
4 Wait for the system to start up and display the setup wizard.
5 Power off the system.
Perform a Factory Restore on the Polycom Touch
Control
If the Polycom Touch Control is not functioning correctly or you have forgotten the Administration password,
you can use the restore button to reset the device. This operation completely erases the device’s settings
and reinstalls the software.
The restore button is on the underside of the Polycom Touch Control, as shown in the following figure.
Polycom, Inc.
188
Troubleshoot
Restore button on the Polycom Touch Control
To reset the Polycom Touch Control using the restore button:
1 Power off the Polycom Touch Control.
2 Disconnect the LAN cable.
3 Disconnect all USB devices.
4 Press and hold the factory restore button while you reconnect the LAN cable to the device. Continue
to hold the factory restore button down for about 10 seconds after the device powers on.
If the device requires login information, the default for the admin ID is admin and for the password is 456.
During the factory restore process, the default platform and applications are reinstalled. Do not power off
the device during the factory restore process. The device displays a success message when the process is
complete.
Perform a Factory Restore on the Polycom EagleEye
Director
If the Polycom EagleEyeTM Director is not functioning correctly or you need to recover from a corrupted
partition, you can use the restore button to reset the device. This operation completely erases the camera’s
settings and reinstalls the software.
The following figure shows you the location of the restore button on the back of the Polycom EagleEye
Director.
Restore button on the Polycom EagleEye Director
Polycom, Inc.
189
Troubleshoot
To reset the Polycom EagleEye Director using the restore button:
1 Press and hold the restore button on the back of the EagleEye Director for 2-3 seconds while the
power light cycles.
When normal video content is displayed on the monitor instead of a blue screen, the EagleEye
Director has been successfully restored.
2 Release the restore button.
Note: Leave EagleEye Director on while restoring
Be sure to keep the Polycom EagleEye Director powered on during the factory restore.
Polycom, Inc.
190
Troubleshoot
Perform a Factory Restore on the EagleEye Producer
You can use the hardware restore button on the EagleEye Producer system to perform a factory restore of
the system. A factory restore completely erases the system and restores it to the software version and
default configuration stored in its factory partition. During a factory restore, the LED indicator on the front of
the system blinks blue and amber.
Note: Do not power off.
Do not power off the EagleEye Producer during the factory restore process.
To perform a factory restore:
1 While the EagleEye Producer system is powered off, insert a straightened paper clip through the
pinhole and press and hold the Restore button.
2 While holding the Restore button, plug in the power cable to power on the EagleEye Producer.
3 Hold the Restore button for five additional seconds, and then release it when the LED alternates
amber and blue.
The EagleEye Producer enters factory restore mode. The factory restore takes approximately eight
minutes to complete. The EagleEye Producer automatically reboots when the process is complete.
4 Calibrate the room view when the reboot is complete. For details, refer to Adjust the Room View.
How to Contact Technical Support
If you are not able to make test calls successfully and you have verified that the equipment is installed and
set up correctly, contact your Polycom distributor or Polycom Technical Support.
To contact Polycom Technical Support, go to support.polycom.com.
Enter the following information, then ask a question or describe the problem. This information helps us to
respond faster to your issue:
● The 14-digit serial number from the System Detail screen or the back of the system
● The software version from the System Detail screen
● Any active alerts generated by the system
● Information about your network
● Troubleshooting steps you have already tried
You can find the system detail information in the local interface by going to Settings > System Information
> Information or in the web interface by clicking System in the blue bar at the top of the web interface page.
Polycom, Inc.
191
Troubleshoot
Polycom Solution Support
Polycom Implementation and Maintenance services provide support for Polycom solution components only.
Additional services for supported third-party Unified Communications (UC) environments integrated with
Polycom solutions are available from Polycom Global Services, and its certified Partners, to help customers
successfully design, deploy, optimize, and manage Polycom visual communication within their third-party
UC environments. UC Professional Services for Microsoft Integration is mandatory for Polycom
Conferencing for Microsoft Outlook and Microsoft Lync Server integrations. For additional information and
details please refer to http://www.polycom.com/services/professional_services/index.html or contact your
local Polycom representative.
Polycom, Inc.
192
System Back Panel Views
Polycom RealPresence Group 300 System
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/
Output
Supported
Formats
Description
1
Audio/Video >
Video Inputs >
Input 1
Video Input
HDCI
Input for the camera
2
N/A
Microphone
Input
Polycom
Microphone
Audio input for up to two Polycom microphone
arrays or a SoundStation IP 7000 speaker
phone or SoundStructure mixer
3
Audio/Video >
Audio > Audio
Output
Audio
Output
3.5mm
Stereo
Audio output for main monitor audio or external
speaker system
System tones and sound effects +
Audio from the far site +
4
Audio/Video >
Monitors > Monitor
1
Video
Output 1
HDMI
Output for Monitor 1
5
Audio/Video >
Monitors > Monitor
2
Video
Output 2
HDMI
Output for Monitor 2 (available only with a
monitor option key)
6
N/A
USB
Connectors
USB 2.0
USB for Software Update, remote control
battery charging
7
General Settings >
Serial Ports
Serial Port
RS-232
Serial port
Polycom, Inc.
193
System Back Panel Views
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/
Output
Supported
Formats
Description
8
Network > LAN
Properties
LAN Port
Ethernet
Connectivity for IP and SIP calls,
People+Content IP, and the system web
interface
9
N/A
Power Input
12 V 6.25 A
Power input
Polycom RealPresence Group 310 System
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/ Output
Supported
Formats
Description
1
Audio/Video >
Video Inputs >
Input 1
Video Input 1
HDCI
Input for Camera 1
2
Audio/Video >
Video Inputs >
Input 2
Audio/Video >
Audio > Audio
Input > Type:
HDMI
Video Input 2/
Audio Input 1
HDMI
Auxiliary video and audio input
3
Audio/Video >
Video Inputs >
Input 2
Video Input 2
VGA
Video input for Content
Note: Use either the HDMI or VGA video input, but not both.
4
Audio/Video >
Audio > Audio
Input > Type:
3.5mm
Audio Input 2
3.5mm
Stereo
Stereo line-level input
3.5mm audio is independent and not
associated with any video input
5
N/A
Microphone
Input
Polycom
Microphone
Audio input for up to two Polycom
microphone arrays or a SoundStation IP 7000
speaker phone or SoundStructure mixer
Polycom, Inc.
194
System Back Panel Views
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/ Output
Supported
Formats
Description
6
Audio/Video >
Audio > Audio
Output
Audio Output 1
3.5mm
Stereo
Audio output for main monitor audio or
external speaker system
Audio Mix Routed to the Output:
System tones and sound effects +
Audio from the far site +
Audio connected to audio input 2 when
associated with video input 2
7
Audio/Video >
Monitors > Monitor
1
Video Output 1
HDMI with
embedded
audio
DVI-D
Output for Monitor 1
When format is HDMI, audio output for main
monitor audio
Audio Mix Routed to the Output:
System tones and sound effects +
Audio from the far site +
Audio connected to audio input 2 when
associated with video input 2
8
Audio/Video >
Monitors > Monitor
2
Video Output 2
HDMI
DVI-D
Output for Monitor 2; does not include
embedded audio
NOTE: RealPresence Group 310 systems
require a dual monitor option key to allow
dual monitor output.
9
N/A
USB
Connectors
USB 2.0
USB for software update, remote control
battery charging
10
General Settings >
Serial Ports
Serial Port
RS-232
Serial port
11
Network > LAN
Properties
LAN Port
Ethernet
Connectivity for IP calls, People+Content IP,
and the system web interface
12
N/A
Power Input
12 V 6.25 A
Power input
Polycom RealPresence Group 500 System
Polycom, Inc.
195
System Back Panel Views
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/ Output
Supported
Formats
Description
1
Audio/Video >
Video Inputs >
Input 1
Video Input 1
HDCI
Input for Camera 1
2
Audio/Video >
Video Inputs >
Input 2
Audio/Video >
Audio > Audio
Input > Type:
HDMI
Video Input 2/
Audio Input 1
HDMI
Auxiliary video and audio input
3
Audio/Video >
Video Inputs >
Input 2
Video Input 2
VGA
Video input for Content
Note: Use either the HDMI or VGA video input, but not both.
4
Audio/Video >
Audio > Audio
Input > Type:
3.5mm
Audio Input 2
3.5mm
Stereo
Stereo line-level input
3.5mm audio is independent and not
associated with any video input
5
N/A
Microphone
Input
Polycom
Microphone
Audio input for up to two Polycom
microphone arrays or a SoundStation IP 7000
speaker phone or SoundStructure mixer
6
Audio/Video >
Audio > Audio
Output
Audio Output 1
3.5mm
Stereo
Audio output for main monitor audio or
external speaker system
Audio Mix Routed to the Output:
System tones and sound effects +
Audio from the far site +
Audio connected to audio input 2 when
associated with video input 2
7
Audio/Video >
Monitors > Monitor
1
Video Output 1
HDMI with
embedded
audio
DVI-D
Output for Monitor 1
When format is HDMI, audio output for main
monitor audio
Audio Mix Routed to the Output:
System tones and sound effects +
Audio from the far site +
Audio connected to audio input 2 when
associated with video input 2
8
Audio/Video >
Monitors > Monitor
2
Video Output 2
HDMI
DVI-D
Output for Monitor 2; does not include
embedded audio
9
N/A
USB
Connectors
USB 2.0
USB for Software Update, remote control
battery charging
Polycom, Inc.
196
System Back Panel Views
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/ Output
Supported
Formats
Description
10
General Settings >
Serial Ports
Serial Port
RS-232
Serial port
11
Network > LAN
Properties
LAN Port
Ethernet
Connectivity for IP calls, People+Content IP,
and the system web interface
12
N/A
Power Input
12 V 6.25 A
Power input
Polycom RealPresence Group 550 System
The following table lists the back panel view of the RealPresence Group 550 systems.
Note: Video output sequence
In version 4.1.3 and later, the RealPresence Group 550 system’s video output sequence
changes when you enable the feature VisualBoard. For more information on how to enable
VisualBoard, see Use the Polycom VisualBoard Application on page 98.
Reference
Number
Location in
Web Interface:
Admin Settings >
Input/Output
Supported
Formats
Description
1
N/A
System Grounding
N/A
System grounding
2
Audio/Video >
Video Inputs >
Input 1
Video Input 1
HDCI
Input for Camera 1
3
Audio/Video >
Video Inputs >
Input 2
Video Input 2
SDI
Input for Camera 2
4
Audio/Video >
Video Inputs >
Input 3
Content input
HDMI
Video and audio input for PC
Content
Polycom, Inc.
197
System Back Panel Views
Reference
Number
Location in
Web Interface:
Admin Settings >
Input/Output
Supported
Formats
Description
5
Audio/Video >
Video Inputs >
Input 3
Content input
VGA
Video input for PC Content
6
Audio/Video >
Audio > Audio
Input > Type:
3.5mm
Audio input 1
3.5mm
Stereo
Audio input
3.5mm audio is independent and
not associated with any video
input
7
N/A
Audio input 2
Polycom
Microphone
Audio input for up to two Polycom
microphone arrays or a
SoundStation IP 7000 speaker
phone or SoundStructure mixer
8
Audio/Video >
Audio > Audio
Input > Type: Line
Audio Input 3
RCA
Auxiliary audio input
Intended as microphone input;
sent to far end only
9
Audio/Video >
Audio > Audio
Input > Type: Line
Out
Audio Output
RCA
Audio output for main monitor
audio
Audio Mix Routed to the Output:
System tones and sound effects +
Audio from the far site +
Audio input from audio inputs 1
and 2, and 3 when associated
video is selected
Using the recordingaudio API
command, you can configure
RealPresence Group systems to
record near-site and far-site audio
using the line out audio port (RCA)
or the HDMI2 port.
10
Audio/Video >
Monitors > Monitor
1
Video output 1/2
SDI
Audio/Video >
Monitors > Monitor
2
11
Audio/Video >
Monitors > Monitor
1
Audio/Video >
Monitors > Monitor
2
Polycom, Inc.
Output for Monitor 1 (VisualBoard
disabled)
Output for Monitor 2 (VisualBoard
enabled)
The SDI output does not include
embedded audio
Video output 1/2
HDMI
Output for Monitor 1 (VisualBoard
disabled)
Output for Monitor 2 (VisualBoard
enabled); does not include
embedded audio
198
System Back Panel Views
Reference
Number
12
Location in
Web Interface:
Admin Settings >
Audio/Video >
Monitors > Monitor
1
Input/Output
Supported
Formats
Video output 1/2/3
HDMI
Output for Monitor 3; does not
include embedded audio
Audio/Video >
Monitors > Monitor
3
Audio/Video >
Monitors > Monitor
1
Output for Monitor 1 (VisualBoard
enabled)
Output for Monitor 2 (VisualBoard
disabled); does not include
embedded audio
Audio/Video >
Monitors > Monitor
2
13
Description
Using the recordingaudio API
command, you can configure
RealPresence Group systems to
record near-site and far-site audio
using the line out audio port (RCA)
or the HDMI2 port.
Video output 1/2
VGA
Output for Monitor 1 (VisualBoard
enabled)
Output for Monitor 2 (VisualBoard
disabled)
Audio/Video >
Monitors > Monitor
2
The VGA output does not include
embedded audio
Note 1: The SDI and HDMI 1(port 11) ports always output the same video.
Note 2: When VisualBoard is enabled, unless you have enabled all three monitors, do not connect monitors to
HDMI 2 (port 12) and VGA ports at the same time. Otherwise, only one of them (HDMI 2, by default) can receive
video.
14
N/A
USB connectors
USB 2.0
USB for Software Update, remote
control battery charging
15
N/A
Power Input
100-240 VAC
1.5A
Power input
16
N/A
Power switch
17
N/A
LAN port
Ethernet
Connectivity for IP calls,
People+Content IP, and the
system’s web interface
18
General Settings >
Serial Ports
Serial interface
RS-232
Serial port
Polycom, Inc.
Power switch
199
System Back Panel Views
Polycom RealPresence Group 700 System
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/ Output
1
N/A
Power Input
100-240
VAC 2.3 A
Power input
2
Audio/Video >
Video Inputs >
Input 1
Video Input 1
HDCI
Input for Camera 1
3
Audio/Video >
Video Inputs >
Input 1
Video Input 1
HDMI
Input for Camera 1
4
Audio/Video >
Video Inputs >
Input 2
Video Input 2
HDCI
Input for Camera 2
5
Audio/Video >
Video Inputs >
Input 2
Video Input 2
HDMI
Input for Camera 2
Supported
Formats
Description
Note: Use either the HDCI or HDMI for video inputs 1 and 2, but not both.
6
Audio/Video >
Video Inputs >
Input 3
Video Input 3
VGA
Video input associated with audio input 3
7
Audio/Video >
Audio > Audio
Input > Type:
3.5mm
Audio Input 3
3.5mm
Stereo
Audio input for stereo line-level
Audio is included in local audio mix when
video source is selected
3.5mm audio is independent and not
associated with any video input
8
Audio/Video >
Video Inputs >
Input 3
Video Input 3
HDMI
Video and audio input
Polycom, Inc.
200
System Back Panel Views
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/ Output
Supported
Formats
Description
Note: Use either the HDMI or VGA for video input 3, but not both.
9
Audio/Video >
Video Inputs >
Input 4
VIdeo Input 4
Composite
Video
Video input
Associated with audio input 4 (audio is
disabled until video input 4 is selected)
10
Audio/Video >
Video Inputs >
Input 4
Video Input 4
Component
Video
Video input associated with audio input 4
(audio is disabled until video input 4 is
selected)
11
Audio/Video >
Audio > Audio
Input > Type:
Component
Audio Input 4
RCA
Associated with video input 4
Inactive until video input is selected
Audio is included in local audio mix when
video source is selected
Note: Use either the Composite/RCA or Component for input 4, but not both.
12
Audio/Video >
Audio > Audio
Input > Type: Line
Audio Input 2
RCA
Auxiliary audio input
Intended as microphone input; sent to far end
only
13
N/A
Audio Input 1
Polycom
Microphone
Audio input for up to three Polycom
microphone arrays or a SoundStation IP 7000
speaker phone or SoundStructure mixer
14
N/A
Audio Output 2
RCA
Audio output for main monitor audio
Audio Mix Routed to the Output:
System tones and sound effects +
Audio from the far site +
Audio input from audio inputs 3 and 4 when
associated video is selected
15
Audio/Video >
Monitors > Monitor
1
Video Output 1
VGA
Output for Monitor 1
16
Audio/Video >
Monitors > Monitor
1
Video Output 1
Audio Output 1
HDMI
Output for Monitor 1
Audio Mix Routed to the Output:
System tones and sound effects +
Audio from the far site +
Audio input from audio inputs 3 and 4 when
associated video is selected
17
Audio/Video >
Monitors > Monitor
2
Video Output 2
VGA
Output for Monitor 2
18
Audio/Video >
Monitors > Monitor
2
Video Output 2
HDMI
Output for Monitor 2
Polycom, Inc.
201
System Back Panel Views
Ref.
Number
Location in
Web Interface:
Admin Settings >
Input/ Output
Supported
Formats
Description
19
Audio/Video >
Monitors > Monitor
3
Video Output 3
VGA
Output for Monitor 3
20
Audio/Video >
Monitors > Monitor
3
Video Output 3
HDMI
Output for Monitor 3
Note: Use either the HDMI or VGA for video outputs 1, 2, and 3, but not both.
21
General Settings >
Serial Ports
Serial Port
RS-232
Serial port
22
N/A
USB
Connectors
USB 3.0
USB for Software Update, remote control
battery charging
23
Network > LAN
Properties > LAN
Options
PC LAN Port
Ethernet
Ethernet switch port
24
Network > LAN
Properties
LAN Port
Ethernet
Connectivity for IP calls, People+Content IP,
and the system web interface
Polycom, Inc.
202
Port Usage
You might need port usage information when you configure your network equipment for video conferencing.
The following tables show IP port usage to and from RealPresence Group systems.
Connections to RealPresence Group Systems
Connections to RealPresence Group Systems
Configuration
Inbound
Port
22
Type
Static
Protocol
TCP
Function
Secure API
On By
Default?
(Low
Security
Profile)
Yes
Enable/Disable?
Admin Settings > Security> Global
Security > Access
Configurable
Port Number
No
Enable SSH Access: Enable to open
port 22.
22
Static
TCP
Polycom Touch
Control over
SSH
Yes
Admin Settings > General Settings >
Pairing > Polycom Touch Control >
Enable Polycom Touch Control
No
23
Static
TCP
Telnet
Diagnostics
No
Admin Settings > Security > Global
Security > Access > Enable Telnet
Access
No
24
Static
TCP
Polycom API
No
Admin Settings > Security > Global
Security > Access > Enable Telnet
Access
No
80
Static
TCP
RealPresence
Group Web UI
over HTTP
Yes
Admin Settings > Security > Global
Security > Access > Enable Web
Access
Admin Settings
> Security >
Global Security
> Access >
Web Access
Port (http)
- Disables HTTP and HTTPS port
Admin Settings > Security > Global
Security > Access > Restrict to
HTTPS
- Disables HTTP port
Polycom, Inc.
203
Port Usage
Connections to RealPresence Group Systems
Configuration
Inbound
Port
161
Type
Static
Protocol
UDP
Function
SNMP
On By
Default?
(Low
Security
Profile)
No
Enable/Disable?
Admin Settings > Security > Global
Security > Access > Enable SNMP
Access
Admin Settings > Servers > SNMP >
Enable SNMP
Configurable
Port Number
Admin Settings
> Servers >
SNMP >
Listening Port
443
Static
TLS
RealPresence
Group Web UI
over HTTPS
Yes
Admin Settings > Security > Global
Security > Access > Enable Web
Access
No
1719
Static
UDP
H.225.0 RAS
No
Admin Settings > Network > IP
Network > H.323 > Use Gatekeeper
No
1720
Static
TCP
H.225.0 Call
Signaling
Yes
Admin Settings > Network > IP
Network > H.323 > Enable IP H.323
No
5001
Static
TCP
People+Conten
t™ IP
Yes
Admin Settings > Audio / Video >
Video Input > General Camera
Settings > Enable People+Content IP
No
5060
Static
TCP
SIP (Protocol
depends on
Transport
Protocol
setting)
Yes
Admin Settings > Network > IP
Network > SIP > Enable SIP
No
SIP
Yes
UDP
5061
Static
TLS
Admin Settings > Network > IP
Network > SIP > Transport Protocol
Admin Settings > Network > IP
Network > SIP > Enable SIP
No
Admin Settings > Network > IP
Network > SIP > Transport Protocol
4915265535
Dynamic
TCP
H.245
Yes
Admin Settings > Network > IP
Network > H.323 > Enable IP H.323
Admin Settings
> Network > IP
Network >
Firewall > Fixed
Ports > TCP
Ports
(1024-65535)
1638432764
(Default)
Dynamic
UDP
RTP/RTCP
Video and
Audio
Yes
Admin Settings > Network > IP
Network > H.323 > Enable IP H.323
Admin Settings
> Network > IP
Network >
Firewall > Fixed
Ports > UDP
Ports
(1024-65535)
Polycom, Inc.
Admin Settings > Network > IP
Network > SIP > Enable SIP
204
Port Usage
Connections from RealPresence Group Systems
Connections from RealPresence Group Systems
Configuration
Outbound
Port
Type
Protocol
Function
On By
Default?
(Low
Security
Profile)
Enable/Disable?
Configurable
Port Number
80
Static
TCP
Polycom Product
Registration
Yes
Uncheck "Register" checkbox during
OOB setup
No
123
Static
UDP
NTP
Yes
Admin Settings > General Settings >
Date and Time > System Time >
Time Server
No
162
Static
UDP
SNMP TRAP
No
Admin Settings > Servers > SNMP >
Enable SNMP
Yes - Admin
Settings >
Servers > SNMP
> Destination
Address <1,2,3>
> Port
Admin Settings > Servers > SNMP >
Destination Address <1,2,3>
389
Static
TLS
LDAP
No
Admin Settings > Servers > Directory
Servers > Server Type
Yes
- Admin Settings
> Servers >
Directory
Servers >
Server Type =
LDAP
- Admin Settings
> Servers >
Directory
Servers >
Server Port
389
Static
TLS
LDAP to ADS
(External
Authentication)
No
Admin Settings > Security > Global
Security > Authentication > Enable
Active Directory External
Authentication
No
443
Static
TLS
CMA/RealPrese
nce Resource
Management
(Provisioning,
Monitoring,
Softupdate)
No
Admin Settings > Servers >
Provisioning Service > Enable
Provisioning
No
443
Static
TLS
Microsoft
Exchange
Server
(Calendaring)
No
Admin Settings > Servers >
Calendaring Service > Enable
Calendaring Service
No
Polycom, Inc.
205
Port Usage
Connections from RealPresence Group Systems
Configuration
Outbound
Port
Type
Protocol
Function
On By
Default?
(Low
Security
Profile)
Enable/Disable?
Configurable
Port Number
443
Static
TLS
Microsoft Lync
Address Book
No
Admin Settings > Servers > Directory
Servers > Server Type
No
514
Static
UDP
SYSLOG
No
Diagnostics > System > System Log
Settings > Enable Remote Logging
Yes - outgoing
port can be
specified in the
Remote Log
Server Address
field.
Diagnostics > System > System Log
Settings > Remote Log Server
Transport Protocol = UDP
601
Static
TCP
SYSLOG
No
Diagnostics > System > System Log
Settings > Enable Remote Logging
Diagnostics > System > System Log
Settings > Remote Log Server
Transport Protocol = TCP
Yes - outgoing
port can be
specified in the
Remote Log
Server Address
field.
1718
Static
UDP
H.225.0
Gatekeeper
Discovery
No
Admin Settings > Network > IP
Network > H.323 > Use Gatekeeper
= Auto
No
1719
Static
UDP
H.225.0 RAS
No
Admin Settings > Network > IP
Network > H.323 > Use Gatekeeper
Yes - outgoing
port can be
specified in the
Primary
Gatekeeper IP
Address field
1720
Static
TCP
H.225.0 Call
Signaling
Yes
Admin Settings > Network > IP
Network > H.323 > Enable IP H.323
No
3601
Static
TCP
GDS
No
Admin Settings > Servers > Directory
Servers > Server Type
No
Polycom, Inc.
206
Port Usage
Connections from RealPresence Group Systems
Configuration
Outbound
Port
5060
Type
Static
Protocol
UDP
TCP
Function
SIP
On By
Default?
(Low
Security
Profile)
Yes
Enable/Disable?
Admin Settings > Network > IP
Network > SIP > Enable SIP
AND
Admin Setting > Network > IP
Network > SIP > Transport Protocol
= Auto, TCP, or UDP
Configurable
Port Number
Yes - outgoing
port can be
specified in the
dial string
(user@domain:p
ort)
Note that the
transport
protocol used
depends on
Admin Settings
> Network > IP
Network > SIP >
Transport
Protocol
5061
Static
TLS
SIP
Yes
Admin Settings > Network > IP
Network > SIP > Enable SIP
AND
Admin Setting > Network > IP
Network > SIP > Transport Protocol
= Auto or TLS
Yes - outgoing
port can be
specified in the
dial string
(user@domain:p
ort)
5222
Static
TCP
CMA/RealPrese
nce Resource
Manager: XMPP
No
Provisioned by RealPresence
Resource Manager
No
6514
Static
TLS
SYSLOG
No
Diagnostics > System > System Log
Settings > Enable Remote Logging
Yes - outgoing
port can be
specified in the
Remote Log
Server Address
field
Diagnostics > System > System Log
Settings > Remote Log Server
Transport Protocol = TLS
Polycom, Inc.
207
Port Usage
Connections from RealPresence Group Systems
Configuration
Outbound
Port
Type
Protocol
Function
On By
Default?
(Low
Security
Profile)
Enable/Disable?
Configurable
Port Number
4915265535
Dynam
ic
TCP
H.245
Yes
Admin Settings > Network > IP
Network > Enable IP H.323
Admin Settings
> Network > IP
Network >
Firewall > Fixed
Ports > TCP
Ports
(1024-65535)
1638432764
(Default)
Dynam
ic
UDP
RTP/RTCP
Video and Audio
Yes
Admin Settings > Network > IP
Network > Enable IP H.323
Admin Settings
> Network > IP
Network >
Firewall > Fixed
Ports > UDP
Ports
(1024-65535)
Polycom, Inc.
Admin Settings > Network > IP
Network > Enable SIP
208
Security Profile Default Settings
RealPresence Group system security profiles provide varying levels of secure access to your RealPresence
Group system. The default settings security profile type vary. See these tables for detailed information on
security profile defaults:
● Maximum Security Profile Default Settings
● High Security Profile Default Settings
● Medium Security Profile Default Settings
● Low Security Profile Default Settings
To learn how to enable a security profile, refer to Configure Security Profiles .
Maximum Security Profile Default Settings
The following table shows the default values for specific settings when you use the Maximum security
profile.
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Auto Answer Point to
Point Video
Yes
No
Do Not Disturb
No
Yes
Auto Answer Multipoint
Video
Yes
No
Do Not Disturb
No
Yes
Call Detail Report
Checkbox
Enabled
Yes
Enable Recent Calls
Checkbox
Disabled
Yes
General Settings
System Settings
Call Settings
Recent Calls
Polycom, Inc.
209
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Allow Polycom Touch
Control Pairing
Note: Disabling this
setting closes the SSH
port.
Checkbox
Disabled
Yes
SmartPairing Mode
Disabled
Disabled
Read-only
RS-2
32
Mode
Off
Control
Camera Control
Closed Caption
Pass Thru
Off
Yes
Login Mode
Range: None,
Admin password
only,
Username/Passw
ord
Admin password
only
Yes
Login prompt type
None
Admin password
only
Username/
Password
Username/
Password
Yes
Enable SIP
Checkbox
Enabled
Yes
Transport Protocol
Auto
TLS
TCP
UDP
TLS
Yes
SVC then AVC
AVC Only
SVC then AVC
Yes
Pairing
Serial Ports
Mode
Note: Some
RealPresence
Group
systems
support only a
subset of
listed modes.
Network
IP Network
Dialing Preference
Scalable Video Coding
Preference (H.264)
Polycom, Inc.
210
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Checkbox
Enabled
Read-only
Audio/Video
Video Inputs
Sleep
Enable Mic Mute in
Sleep Mode
General Camera Settings
Allow Other
Participants In
a Call to
Control Your
Camera
Checkbox
Disabled
Yes
Enable
People+Cont
ent IP
Checkbox
Disabled
Yes
Enable
Camera
Preset
Snapshot
Icons
Checkbox
Disabled
Yes
Maximum
High
Medium
Low
Maximum
Yes
Active
Directory
Authentication
Checkbox
Disabled
Yes
Enable
Network
Intrusion
Detection
System
(NIDS)
Checkbox
Enabled
Yes
Enable Web
Access
Checkbox
Enabled
Yes
Security
Global Security
Security Profile
Security
Profile
Authentication
Access
Polycom, Inc.
211
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Enable
Access to
User Settings
Checkbox
Disabled
Yes
Restrict to
HTTPS
Checkbox
Enabled
Read-only
Web access
port (http)
Note: You
cannot select
this setting if
the Restrict
to HTTPS
setting is
enabled.
16-bit integer
Grayed out (80)
Read-only
Enable Telnet
Access
Checkbox
Disabled
Read-only
Enable SNMP
Access
Checkbox
Disabled
Yes
Enable SSH
Access
Checkbox
Enabled
Yes
Lock Port
after Failed
Logins
Off,2-10
Off
Yes
Port Lock
Duration
1,2,3,5,10,20,30
minutes,
1,2,4,8 hours
1 minute
Yes
Reset Port
Lock
Counter
After
Off,[1..24] hours
Off
Yes
Enable
Whitelist
Checkbox
Disabled
Yes
Idle Session
Timeout in
Minutes
1,3,5,10,15,20,30,
45,60,120,240,48
0
10
Yes
API
Port
Polycom, Inc.
212
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Maximum
Number of
Active
Sessions
10,15,20,25,30,35
,40,45,50
25
Yes
Allow Video
Display on
Web
Checkbox
Disabled
Yes
Require AES
Encryption for
Calls
Off
When Available
Required for Video
Calls Only
Required for All
Calls
Required for Video
Calls Only
Yes
Require FIPS
140
Cryptography
Checkbox
Enabled
Yes
Lock Admin
Account After
Failed Logins
2-10
3
Yes
Admin
Account Lock
Duration
1,2,3,5 minutes
1
Yes
Reset Admin
Account Lock
Counter After
Off,[1..24] hours
1
Yes
Lock User
Account After
Failed Logins
2-10
3
Yes
User Account
Lock Duration
1,2,3,5,10,20,30
minutes,
1,2,4,8 hours
1 minute
Yes
Reset User
Account Lock
Counter After
Off,[1..24] hours
1
Yes
Encryption
Local Accounts
Account Lockout
Polycom, Inc.
213
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Use Room
Password for
Remote
Access
Checkbox
Disabled
Read-only
Require User
Login for
System
Access
Checkbox
Enabled
Yes
Login Credentials
Password Requirements
Admin (Room, Remote), User (Room, Remote)
Reject
Previous
Passwords
8-16
10
Yes
Minimum
Password
Age in Days
Off,1,5,10,15,20,3
0
Off
Yes
Maximum
Password
Age in Days
30,60,90,100,110,
120,130,140,150,
160,170,180
60
Yes
Minimum
Changed
Characters
1-4
4
Yes
Password
Expiration
Warning
1-7
7
Yes
Remote Access (Admin Remote, User Remote)
Polycom, Inc.
Minimum
Length
8-16,32
15
Yes
Require
Lowercase
Off,1,2,All
2
Yes
Require
Uppercase
Off,1,2,All
2
Yes
Require
Numbers
Off,1,2,All
2
Yes
Require
Special
Characters
Off,1,2,All
2
Yes
214
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Maximum
Consecutive
Repeated
Characters
1-4
2
Yes
Can contain
ID or Its
Reverse Form
Checkbox
Disabled
Read-only
User (Room), Admin (Room)
Minimum
Length
8-16,32
9
Yes
Require
Lowercase
Off,1,2,All
Off
Yes
Require
Uppercase
Off,1,2,All
Off
Yes
Require
Numbers
Off,1,2,All
Off
Yes
Require
Special
Characters
Off,1,2,All
Off
Yes
Maximum
Consecutive
Repeated
Characters
1-4
2
Yes
Can contain
ID or Its
Reverse Form
Checkbox
Disabled
Read-only
Minimum
Length
Off,1-20,32
Off
Yes
Require
Lowercase
Off,1,2,All
Off
Yes
Require
Uppercase
Off,1,2,All
Off
Yes
Require
Numbers
Off,1,2,All
Off
Yes
Require
Special
Characters
Off,1,2,All
Off
Yes
Meeting
Polycom, Inc.
215
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Reject
Previous
Passwords
8-16
10
Yes
Minimum
Password
Age in Days
Off,1,5,10,15,20,3
0
Off
Yes
Maximum
Consecutive
Repeated
Characters
1-4
2
Yes
SNMP
Note: SNMP passwords are applicable only when the system uses SNMP v3.
Minimum
Length
6-16,32
12
Yes
Require
Lowercase
Off,1,2,All
1
Yes
Require
Uppercase
Off,1,2,All
1
Yes
Require
Numbers
Off,1,2,All
1
Yes
Require
Special
Characters
Off,1,2,All
1
Yes
Reject
Previous
Passwords
8-16
10
Yes
Minimum
Password
Age in Days
Off,1,5,10,15,20,3
0
Off
Yes
Maximum
Consecutive
Repeated
Characters
1-4
2
Yes
Can contain
ID or Its
Reverse Form
Checkbox
Disabled
Read-only
Checkbox
Enabled
Yes
Security Banner
Enable Security
Banner
Polycom, Inc.
216
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Banner Text
DoD
Custom
DoD
Yes
Local System Banner
Text
Unicode
characters, 2048
bytes max
DoD Banner Text
Yes
Remote System
Banner Text
Unicode
characters, 2048
bytes max
DoD Banner Text
Yes
Revocation
Method
OCSP
CRL
OCSP
Yes
Allow
Incomplete
Revocation
Checks
Checkbox
Enabled
Yes
Certificate
Validation
(Web Server)
Checkbox
Enabled
Yes
Certificate
Validation
(Client Apps)
Checkbox
Enabled
Yes
XMPP
Provisioned-only
Disabled
Yes (via
provisioning)
Service Type
Note: The Microsoft
selection means
Microsoft Lync
Server 2010 or 2013,
depending on what is
installed.
Off
Microsoft
Polycom GDS
LDAP
Off
Yes
Revocation
Certificates
Certificate Options
Servers
Directory Servers
Polycom, Inc.
217
Security Profile Default Settings
Maximum
Admin Settings Area
Range
Default Value
Configurable?
Version1
Checkbox
Disabled
Yes
Version2c
Checkbox
Disabled
Yes
Version3
Checkbox
Enabled
Yes
Checkbox
Disabled
Yes
SNMP
Calendaring Service
Enable Calendaring
Service
Maximum
Diagnostics Area
Range
Default
Value
Configurable?
Enable Remote Logging
Checkbox
Disabled
Yes
Remote Log Server Transport Protocol
UDP
TCP
TLS
TLS
Yes
System
System Log Settings
Change Maximum Security Profile Default Values
When you configure the RealPresence Group system to use the Maximum Security Profile, the system forces you to
change the following settings from their default values:
● Admin account User Id
● User account User Id
● Admin room password
● Admin remote access password
● User room password
● User remote access password
Other Restrictions when Using the Maximum Security Profile
The following settings are not available in the “User Settings” menu (they are configurable only in their
respective sections of the Admin Settings):
● Camera > Allow Other Participants in a Call to Control Your Camera
● Meetings > Mute Auto Answer Calls
● Meetings > Auto Answer Point-to-Point Video
Polycom, Inc.
218
Security Profile Default Settings
● Meetings > Auto Answer Multipoint Video
● Meetings > Allow Video Display on Web
Polycom, Inc.
219
Security Profile Default Settings
High Security Profile Default Settings
The following table shows the default values for specific Admin settings when you use the High security
profile.
High
Admin Settings Area
Range
Default Value
Configurable?
Auto Answer Point to Point
Video
Yes
No
Do Not Disturb
No
Yes
Auto Answer Multipoint
Video
Yes
No
Do Not Disturb
No
Yes
Call Detail Report
Checkbox
Enabled
Yes
Enable Recent Calls
Checkbox
Disabled
Yes
Allow Polycom Touch
Control Pairing
Note: Disabling this setting
closes the SSH port.
Checkbox
Disabled
Yes
SmartPairing Mode
Disabled
Automatic
Manual
Disabled
Yes
Off
Control
Camera Control
Closed Caption
Pass Thru
Off
Yes
None, Admin
password only,
Username/Pass
word
Admin password
only
Yes
General Settings
System Settings
Call Settings
Recent Calls
Pairing
Serial Ports
Mode
RS-232 Mode
Note: Some
RealPresence
Group systems
support only a
subset of listed
modes.
Login Mode
Polycom, Inc.
220
Security Profile Default Settings
High
Admin Settings Area
Range
Default Value
Configurable?
Enable SIP
Checkbox
Enabled
Yes
Transport Protocol
Auto
TLS
TCP
UDP
TLS
Yes
Scalable Video Coding
Preference (H.264)
SVC then AVC
AVC Only
AVC Only
Yes
Enable Mic Mute in Sleep
Mode
Checkbox
Disabled
Yes
Allow Other
Participants In a
Call to Control Your
Camera
Checkbox
Disabled
Yes
Enable
People+Content IP
Checkbox
Disabled
Yes
Enable Camera
Preset Snapshot
Icons
Checkbox
Disabled
Yes
Maximum
High
Medium
Low
High
Yes
Checkbox
Disabled
Yes
Network
IP Network
Dialing Preference
Audio/Video
Video Inputs
Sleep
General Camera Settings
Security
Global Security
Security Profile
Security Profile
Authentication
Active Directory
Authentication
Polycom, Inc.
221
Security Profile Default Settings
High
Admin Settings Area
Range
Default Value
Configurable?
Enable Network
Intrusion Detection
System (NIDS)
Checkbox
Enabled
Yes
Enable Web Access
Checkbox
Enabled
Yes
Enable Access to
User Settings
Checkbox
Disabled
Yes
Restrict to HTTPS
Checkbox
Enabled
Read-only
Web access port
(http)
16-bit integer
Grayed out (80)
Read-only
Enable Telnet
Access
Checkbox
Disabled
Read-only
Enable SSH Access
Checkbox
Enabled
Yes
Enable SNMP
Access
Checkbox
Disabled
Yes
Lock Port after
Failed Logins
Off,2-10
Off
Yes
Port Lock
Duration
1,2,3,5,10,20,30
minutes,
1,2,4,8 hours
1 minute
Yes
Reset Port Lock
Counter After
Off,[1..24] hours
Off
Yes
Enable Whitelist
Checkbox
Disabled
Yes
Idle Session
Timeout in
Minutes
1,3,5,10,15,20,3
0,45,60,120,240
,480
10
Yes
Maximum
Number of Active
Sessions
10,15,20,25,30,
35,40,45,50
25
Yes
Allow Video
Display on Web
Checkbox
Disabled
Yes
Access
Note: You cannot
select this setting
if the Restrict to
HTTPS setting is
enabled.
Polycom, Inc.
222
Security Profile Default Settings
High
Admin Settings Area
Range
Default Value
Configurable?
Require AES
Encryption for Calls
Off
When Available
Required for
Video Calls Only
Required for All
Video Calls
Required- Video
Calls
Yes
Require FIPS 140
Cryptography
Checkbox
Enabled
Yes
Lock Admin
Account After
Failed Logins
2-10
3
Yes
Admin Account
Lock Duration
1,2,3,5 minutes
1
Yes
Reset Admin
Account Lock
Counter After
Off,[1..24] hours
Off
Yes
Lock User Account
After Failed Logins
2-10
3
Yes
User Account Lock
Duration
1,3,5,10,15,20,3
0 minutes,
1,2,4,8 hours
1 minute
Yes
Reset User Account
Lock Counter After
Off,[1..24] hours
Off
Yes
Use Room
Password for
Remote Access
Checkbox
Disabled
Yes
Require User Login
for System Access
Checkbox
Enabled
Yes
Encryption
Local Accounts
Account Lockout
Login Credentials
Password Requirements
Admin (Room, Remote), User (Room, Remote)
Polycom, Inc.
Reject Previous
Passwords
Off,1-16
10
Yes
Minimum Password
Age in Days
Off,1,5,10,15,20,
30
Off
Yes
223
Security Profile Default Settings
High
Admin Settings Area
Range
Default Value
Configurable?
Maximum
Password Age in
Days
Off,30,60,90,100
,
110,120,130,140
,
150,160,170,18
0
90
Yes
Minimum Changed
Characters
1-4
4
Yes
Password
Expiration Warning
1-7
4
Yes
Remote Access (Admin Remote, User Remote)
Minimum Length
1-16,32
6
Yes
Require Lowercase
Off,1,2,All
Off
Yes
Require Uppercase
Off,1,2,All
Off
Yes
Require Numbers
Off,1,2,All
Off
Yes
Require Special
Characters
Off,1,2,All
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Can contain ID or
Its Reverse Form
Checkbox
Disabled
Read-only
User (Room), Admin (Room)
Polycom, Inc.
Minimum Length
6-16,32
6
Yes
Require Lowercase
Off,1,2,All
Off
Yes
Require Uppercase
Off,1,2,All
Off
Yes
Require Numbers
Off,1,2,All
Off
Yes
Require Special
Characters
Off,1,2,All
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Can contain ID or
Its Reverse Form
Checkbox
Disabled
Read-only
224
Security Profile Default Settings
High
Admin Settings Area
Range
Default Value
Configurable?
Minimum Length
Off,1-20,32
Off
Yes
Require Lowercase
Off,1,2,All
Off
Yes
Require Uppercase
Off,1,2,All
Off
Yes
Require Numbers
Off,1,2,All
Off
Yes
Require Special
Characters
Off,1,2,All
Off
Yes
Reject Previous
Passwords
Off,1-16
10
Yes
Minimum Password
Age in Days
Off,1,5,10,15,20,
30
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Meeting
SNMP
Note: SNMP passwords are applicable only when the system uses SNMP v3.
Polycom, Inc.
Minimum Length
6-16,32
8
Yes
Require Lowercase
Off,1,2,All
1
Yes
Require Uppercase
Off,1,2,All
1
Yes
Require Numbers
Off,1,2,All
1
Yes
Require Special
Characters
Off,1,2,All
1
Yes
Reject Previous
Passwords
Off,1-16
5
Yes
Minimum Password
Age in Days
Off,1,5,10,15,20,
30
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Can contain ID or
Its Reverse Form
Checkbox
Disabled
Read-only
225
Security Profile Default Settings
High
Admin Settings Area
Range
Default Value
Configurable?
Certificate
Validation (Web
Server)
Checkbox
Enabled
Yes
Certificate
Validation (Client
Apps)
Checkbox
Enabled
Yes
Revocation Method
OCSP
CRL
OCSP
Yes
Allow Incomplete
Revocation Checks
Checkbox
Enabled
Yes
Enable Security Banner
Checkbox
Disabled
Yes
Banner Text
DoD
Custom
Custom
Yes
Local System Banner Text
Unicode
characters, 2048
bytes max
Null
(no text)
Yes
Remote System Banner Text
Unicode
characters, 2048
bytes max
Null
(no text)
Yes
XMPP
Provisioned-only
Disabled
Yes (via
provisioning)
Service Type
Note: The Microsoft
selection means Microsoft
Lync
Server 2010 or 2013,
depending on what is
installed.
Off
Microsoft
Polycom GDS
LDAP
Off
Yes
Certificates
Certificate Options
Revocation
Security Banner
Servers
Directory Servers
Polycom, Inc.
226
Security Profile Default Settings
High
Admin Settings Area
Range
Default Value
Configurable?
Version1
Checkbox
Disabled
Yes
Version2c
Checkbox
Disabled
Yes
Version3
Checkbox
Enabled
Yes
Checkbox
Disabled
Yes
SNMP
Calendaring Service
Enable Calendaring Service
High
Range
Default
Value
Configurable?
Enable Remote Logging
Checkbox
Disabled
Yes
Remote Log Server Transport Protocol
UDP
TCP
TLS
UDP
Yes
Diagnostics Area
System
System Log Settings
Change High Security Profile Default Values
When you configure the RealPresence Group system to use the High Security Profile, the system forces you to
change the following settings from their default values:
● Admin account room password
● User account room password
● Admin account remote access password
Polycom, Inc.
227
Security Profile Default Settings
Medium Security Profile Default Settings
The following table shows the default values for specific Admin settings when you use the Medium security
profile.
Medium
Admin Settings Area
Range
Default Value
Configurable?
Auto Answer Point to Point
Video
Yes
No
Do Not Disturb
No
Yes
Auto Answer Multipoint Video
Yes
No
Do Not Disturb
No
Yes
Call Detail Report
Checkbox
Enabled
Yes
Enable Recent Calls
Checkbox
Enabled
Yes
Allow Polycom Touch Control
Pairing
Note: Disabling this setting
closes the SSH port.
Checkbox
Enabled
Yes
SmartPairing Mode
Disabled
Automatic
Manual
Enabled
Yes
Off
Control
Camera Control
Closed Caption
Pass Thru
Off
Yes
Range: None,
Admin
password only,
Username/Pas
sword
Admin
password only
Yes
General Settings
System Settings
Call Settings
Recent Calls
Pairing
Serial Ports
Mode
RS-232 Mode
Note: Some
RealPresence Group
systems support only
a subset of listed
modes.
Login Mode
Polycom, Inc.
228
Security Profile Default Settings
Medium
Admin Settings Area
Range
Default Value
Configurable?
Enable SIP
Checkbox
Enabled
Yes
Transport Protocol
Auto
TLS
TCP
UDP
TLS
Yes
Scalable Video Coding
Preference (H.264)
SVC then AVC
AVC Only
SVC then AVC
Yes
Enable Mic Mute in Sleep
Mode
Checkbox
Disabled
Yes
Allow Other
Participants In a Call
to Control Your
Camera
Checkbox
Disabled
Yes
Enable
People+Content IP
Checkbox
Enabled
Yes
Enable Camera
Preset Snapshot
Icons
Checkbox
Enabled
Yes
Maximum
High
Medium
Low
Medium
Yes
Checkbox
Disabled
Yes
Network
IP Network
Dialing Preference
Audio/Video
Video Inputs
Sleep
General Camera Settings
Security
Global Security
Security Profile
Security Profile
Authentication
Active Directory
Authentication
Polycom, Inc.
229
Security Profile Default Settings
Medium
Admin Settings Area
Range
Default Value
Configurable?
Enable Network
Intrusion Detection
System (NIDS)
Checkbox
Enabled
Yes
Enable Web Access
Checkbox
Enabled
Yes
Enable Access to
User Settings
Checkbox
Disabled
Yes
Restrict to HTTPS
Checkbox
Enabled
Yes
Web access port
(http)
16-bit integer
Grayed out (80)
Yes
Enable Telnet
Access
Checkbox
Disabled
Yes
Enable SSH Access
Checkbox
Enabled
Yes
Enable SNMP
Access
Checkbox
Disabled
Yes
Lock Port after
Failed Logins
Off,2-10
Off
Yes
Port Lock Duration
1,2,3,5,10,20,3
0 minutes,
1,2,4,8 hours
1 minute
Yes
Reset Port Lock
Counter After
Off,[1..24]
hours
Off
Yes
Enable Whitelist
Checkbox
Disabled
Yes
Idle Session
Timeout in Minutes
1,3,5,10,15,20,
30,45,60,120,2
40,480
10,15,20,25,30,
35,40,45,50
Yes
Maximum Number
of Active Sessions
10-50
25
Yes
Allow Video Display
on Web
Checkbox
Disabled
Yes
Access
Note: You cannot
select this setting if
the Restrict to
HTTPS setting is
enabled.
Polycom, Inc.
230
Security Profile Default Settings
Medium
Admin Settings Area
Range
Default Value
Configurable?
Require AES
Encryption for Calls
Off
When Available
Required for
Video Calls
Only
Required for All
Video Calls
When Available
Yes
Require FIPS 140
Cryptography
Checkbox
Enabled
Yes
Lock Admin Account
After Failed Logins
Off,2-10
3
Yes
Admin Account Lock
Duration
1,2,3,5 minutes
1
Yes
Reset Admin Account
Lock Counter After
Off,[1..24]
hours
Off
Yes
Lock User Account
After Failed Logins
Off,2-10
3
Yes
User Account Lock
Duration
1,2,3,5,10,20,3
0 minutes,
1,2,4,8 hours
1 minute
Yes
Reset User Account
Lock Counter After
Off,[1..24]
hours
Off
Yes
Use Room Password
for Remote Access
Checkbox
Enabled
Yes
Require User Login
for System Access
Checkbox
Enabled
Yes
Encryption
Local Accounts
Account Lockout
Login Credentials
Password Requirements
Admin (Room, Remote), User (Room, Remote)
Polycom, Inc.
Reject Previous
Passwords
Off,1-16
Off
Yes
Minimum Password
Age in Days
Off,1,5,10,15,2
0,30
Off
Yes
231
Security Profile Default Settings
Medium
Admin Settings Area
Range
Default Value
Configurable?
Maximum Password
Age in Days
Off,30,60,90,10
0,110,
120,130,140,15
0,160,
170,180
Off
Yes
Minimum Changed
Characters
Off,1-4,All
Off
Yes
Password Expiration
Warning
Off,1-7
Off
Yes
Remote Access (Admin Remote, User Remote)
Minimum Length
1-16,32
3
Yes
Require Lowercase
Off,1,2,All
Off
Yes
Require Uppercase
Off,1,2,All
Off
Yes
Require Numbers
Off,1,2,All
Off
Yes
Require Special
Characters
Off,1,2,All
Off
Yes
Maximum
Consecutive
Repeated Characters
Off,1-4
Off
Yes
Can contain ID or Its
Reverse Form
Checkbox
Disabled
Yes
User (Room), Admin (Room)
Minimum Length
8-16,32
8
Yes
Require Lowercase
Off,1,2,All
Off
Yes
Require Uppercase
Off,1,2,All
Off
Yes
Require Numbers
Off,1,2,All
Off
Yes
Require Special
Characters
Off,1,2,All
Off
Yes
Maximum
Consecutive
Repeated Characters
Off,1-4
Off
Yes
Can contain ID or Its
Reverse Form
Checkbox
Disabled
Yes
Off,1-20,32
Off
Yes
Meeting
Minimum Length
Polycom, Inc.
232
Security Profile Default Settings
Medium
Admin Settings Area
Range
Default Value
Configurable?
Require Lowercase
Off,1,2,All
Off
Yes
Require Uppercase
Off,1,2,All
Off
Yes
Require Numbers
Off,1,2,All
Off
Yes
Require Special
Characters
Off,1,2,All
Off
Yes
Reject Previous
Passwords
Off,1-16
Off
Yes
Minimum Password
Age in Days
Off,1,5,10,15,2
0,30
Off
Yes
Maximum
Consecutive
Repeated Characters
Off,1-4
Off
Yes
SNMP
Note: SNMP passwords are applicable only when the system uses SNMP v3.
Minimum Length
3-16,32
3
Yes
Require Lowercase
Off,1,2,All
Off
Yes
Require Uppercase
Off,1,2,All
Off
Yes
Require Numbers
Off,1,2,All
Off
Yes
Require Special
Characters
Off,1,2,All
Off
Yes
Reject Previous
Passwords
Off,1-16
Off
Yes
Minimum Password
Age in Days
Off,1,5,10,15,2
0,30
Off
Yes
Maximum
Consecutive
Repeated Characters
Off,1-4
Off
Yes
Can contain ID or Its
Reverse Form
Checkbox
Disabled
Yes
Certificate Validation
(Web Server)
Checkbox
Disabled
Yes
Certificate Validation
(Client Apps)
Checkbox
Disabled
Yes
Certificates
Certificate Options
Polycom, Inc.
233
Security Profile Default Settings
Medium
Admin Settings Area
Range
Default Value
Configurable?
Revocation Method
OCSP
CRL
OCSP
Yes
Allow Incomplete
Revocation Checks
Checkbox
Enabled
Yes
Enable Security Banner
Checkbox
Disabled
Yes
Banner Text
DoD
Custom
Custom
Yes
Local System Banner Text
Unicode
characters,
2048 bytes max
Null
(no text)
Yes
Remote System Banner Text
Unicode
characters,
2048 bytes max
Null
(no text)
Yes
XMPP
Provisioned-onl
y
Disabled
Yes (via
provisioning)
Service Type
Off
Microsoft
Polycom GDS
LDAP
Off
Yes
Version1
Checkbox
Disabled
Yes
Version2c
Checkbox
Disabled
Yes
Version3
Checkbox
Enabled
Yes
Checkbox
Disabled
Yes
Revocation
Security Banner
Servers
Directory Servers
Note: The Microsoft selection
means Microsoft Lync
Server 2010 or 2013,
depending on what is installed.
SNMP
Calendaring Service
Enable Calendaring Service
Medium
Diagnostics Area
Range
Polycom, Inc.
Default
Value
Configurable?
234
Security Profile Default Settings
System
System Log Settings
Enable Remote Logging
Checkbox
Disabled
Yes
Remote Log Server Transport Protocol
UDP
TCP
TLS
UDB
Yes
Change Medium Security Profile Default Values
When you configure the RealPresence Group system to use the High Security Profile, the system forces you to
change the following settings from their default values:
● Admin account room password
● User account room password
Polycom, Inc.
235
Security Profile Default Settings
Low Security Profile Default Settings
The following table shows the default values for specific Admin settings when you use the Low security
profile.
Low
Admin Settings Area
Range
Default Value
Configurable?
Auto Answer Point to
Point Video
Yes
No
Do Not Disturb
No
Yes
Auto Answer Multipoint
Video
Yes
No
Do Not Disturb
No
Yes
Call Detail Report
Checkbox
Enabled
Yes
Enable Recent Calls
Checkbox
Enabled
Yes
Allow Polycom Touch
Control Pairing
Note: Disabling this
setting closes the SSH
port.
Checkbox
Enabled
Yes
SmartPairing Mode
Disabled
Automatic
Manual
Disabled
Yes
Off
Control
Camera Control
Closed Caption
Pass Thru
Control
Yes
General Settings
System
Settings
Call Settings
Recent Calls
Pairing
Serial Ports
Mode
RS-232 Mode
Note: Some
RealPresence
Group
systems
support only a
subset of
listed modes.
Polycom, Inc.
236
Security Profile Default Settings
Low
Admin Settings Area
Range
Default Value
Configurable?
Enable SIP
Checkbox
Enabled
Yes
Transport Protocol
Auto
TLS
TCP
UDP
Auto
Yes
SVC then AVC
AVC Only
AVC Only
Yes
Network
IP Network
Dialing Preference
Scalable Video Coding
Preference (H.264)
Audio/Video
Video Inputs
General Camera Settings
Allow Other
Participants In
a Call to
Control Your
Camera
Checkbox
Enabled
Yes
Enable
People+Cont
ent IP
Checkbox
Enabled
Yes
Enable
Camera
Preset
Snapshot
Icons
Checkbox
Enabled
Yes
Checkbox
Disabled
Yes
Maximum
High
Medium
Low
Low
Yes
Sleep
Enable Mic Mute in
Sleep Mode
Security
Global Security
Security Profile
Security
Profile
Polycom, Inc.
237
Security Profile Default Settings
Low
Admin Settings Area
Range
Default Value
Configurable?
Active
Directory
Authentication
Checkbox
Disabled
Yes
Enable
Network
Intrusion
Detection
System
(NIDS)
Checkbox
Disabled
Yes
Enable Web
Access
Checkbox
Enabled
Yes
Enable
Access to
User Settings
Checkbox
Disabled
Yes
Restrict to
HTTPS
Checkbox
Disabled
Yes
Web access
port (http)
16-bit integer
Grayed out (80)
Yes
Enable
Telnet
Access
Checkbox
Disabled
Yes
Enable SSH
Access
Checkbox
Enabled
Yes
Enable
SNMP
Access
Checkbox
Disabled
Yes
Lock Port
after Failed
Logins
Off,2-10
Off
Yes
Authentication
Access
Note: You
cannot
select this
setting if the
Restrict to
HTTPS
setting is
enabled.
Polycom, Inc.
238
Security Profile Default Settings
Low
Admin Settings Area
Range
Default Value
Configurable?
Port Lock
Duration
1,2,3,5,10,20,30
minutes,
1,2,4,8 hours
1 minute
Yes
Reset Port
Lock
Counter
After
Off,[1..24] hours
Off
Yes
Enable
Whitelist
Checkbox
Disabled
Yes
Idle Session
Timeout in
Minutes
1,3,5,10,15,20,30,45,
60,120,240,480
10
Yes
Maximum
Number of
Active
Sessions
10,15,20,25,30,35,40
,45,50
25
Yes
Allow Video
Display on
Web
Checkbox
Disabled
Yes
Require AES
Encryption for
Calls
Off
When Available
Required for Video
Calls Only
Required for All
Video Calls
Off
Yes
Require FIPS
140
Cryptography
Checkbox
Disabled
Yes
Lock Admin
Account After
Failed Logins
Off,2-10
Off
Yes
Admin
Account Lock
Duration
1,2,3,5 minutes
1
Yes
Encryption
Local Accounts
Account Lockout
Polycom, Inc.
239
Security Profile Default Settings
Low
Admin Settings Area
Range
Default Value
Configurable?
Reset Admin
Account Lock
Counter After
Off,[1..24] hours
Off
Yes
Lock User
Account After
Failed Logins
Off,2-10
Off
Yes
User Account
Lock Duration
1,2,3,5,10,20,30
minutes,
1,2,4,8 hours
1 minute
Yes
Reset User
Account Lock
Counter After
Off,[1..24] hours
Off
Yes
Use Room
Password for
Remote
Access
Checkbox
Enabled
Yes
Require User
Login for
System
Access
Checkbox
Disabled
Yes
Login Credentials
Password Requirements
Admin (Room, Remote), User (Room, Remote)
Polycom, Inc.
Reject
Previous
Passwords
Off,1-16
Off
Yes
Minimum
Password
Age in Days
Off,1,5,10,15,20,30
Off
Yes
Maximum
Password
Age in Days
Off,30,60,90,100,110,
120,130,140,150,160
,170,180
Off
Yes
Minimum
Changed
Characters
Off,1-4,All
Off
Yes
Password
Expiration
Warning
Off,1-7
Off
Yes
240
Security Profile Default Settings
Low
Admin Settings Area
Range
Default Value
Configurable?
Remote Access (Admin Remote, User Remote)
Minimum
Length
Off,1-16,32
Off
Yes
Require
Lowercase
Off,1,2,All
Off
Yes
Require
Uppercase
Off,1,2,All
Off
Yes
Require
Numbers
Off,1,2,All
Off
Yes
Require
Special
Characters
Off,1,2,All
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Can contain
ID or Its
Reverse Form
Checkbox
Enabled
Yes
User (Room), Admin (Room)
Polycom, Inc.
Minimum
Length
Off,1-16,32
Off
Yes
Require
Lowercase
Off,1,2,All
Off
Yes
Require
Uppercase
Off,1,2,All
Off
Yes
Require
Numbers
Off,1,2,All
Off
Yes
Require
Special
Characters
Off,1,2,All
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Can contain
ID or Its
Reverse Form
Checkbox
Enabled
Yes
241
Security Profile Default Settings
Low
Admin Settings Area
Range
Default Value
Configurable?
Minimum
Length
Off,1-20,32
Off
Yes
Require
Lowercase
Off,1,2,All
Off
Yes
Require
Uppercase
Off,1,2,All
Off
Yes
Require
Numbers
Off,1,2,All
Off
Yes
Require
Special
Characters
Off,1,2,All
Off
Yes
Reject
Previous
Passwords
Off,1-16
Off
Yes
Minimum
Password
Age in Days
Off,1,5,10,15,20,30
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Meeting
SNMP
Note: SNMP passwords are applicable only when the system uses SNMP v3.
Polycom, Inc.
Minimum
Length
8-16,32
8
Yes
Require
Lowercase
Off,1,2,All
Off
Yes
Require
Uppercase
Off,1,2,All
Off
Yes
Require
Numbers
Off,1,2,All
Off
Yes
Require
Special
Characters
Off,1,2,All
Off
Yes
Reject
Previous
Passwords
Off,1-16
Off
Yes
242
Security Profile Default Settings
Low
Admin Settings Area
Range
Default Value
Configurable?
Minimum
Password
Age in Days
Off,1,5,10,15,20,30
Off
Yes
Maximum
Consecutive
Repeated
Characters
Off,1-4
Off
Yes
Can contain
ID or Its
Reverse Form
Checkbox
Disabled
Yes
Certificate
Validation
(Web Server)
Checkbox
Disabled
Yes
Certificate
Validation
(Client Apps)
Checkbox
Disabled
Yes
Revocation
Method
OCSP
CRL
OCSP
Yes
Allow
Incomplete
Revocation
Checks
Checkbox
Enabled
Yes
Enable Security
Banner
Checkbox
Disabled
Yes
Banner Text
DoD
Custom
Custom
Yes
Local System Banner
Text
Unicode characters,
2048 bytes max
Null
(no text)
Yes
Remote System
Banner Text
Unicode characters,
2048 bytes max
Null
(no text)
Yes
Certificates
Certificate Options
Revocation
Security Banner
Polycom, Inc.
243
Security Profile Default Settings
Admin Settings Area
Low
Range
Default Value
Configurable?
XMPP
Provisioned-only
Disabled
Yes (via provisioning)
Service Type
Off
Microsoft
Polycom GDS
LDAP
Off
Yes
Version1
Checkbox
Disabled
Yes
Version2c
Checkbox
Disabled
Yes
Version3
Checkbox
Enabled
Yes
Checkbox
Disabled
Yes
Servers
Directory Servers
Note: The Microsoft
selection means
Microsoft Lync
Server 2010 or 2013,
depending on what is
installed.
SNMP
Calendaring Service
Enable Calendaring
Service
Low
Range
Default
Value
Configurable?
Enable Remote Logging
Checkbox
Disabled
Yes
Remote Log Server Transport Protocol
UDP
TCP
TLS
UDP
Yes
Diagnostics Area
System
System Log Settings
Polycom, Inc.
244
Call Speeds and Resolutions
See the following topics to learn about maximum call speeds and resolutions for different call types:
● Point-to-Point Call Speeds
● Multipoint Call Speeds
● High-Profile Call Speeds and Resolutions
● Multipoint Resolutions for High Definition Video
● Resolution and Frame Rates for Content Video
Point-to-Point Call Speeds
The following table shows the maximum allowable H.323/SIP point-to-point call speeds for each type of
RealPresence Group system.
Point-to-Point Call Speeds
System
Maximum Call Speed
RealPresence Group 300
3072 kbps
RealPresence Group 310
3072 kbps
RealPresence Group 500
6144 kbps
RealPresence Group 550
6144 kbps
RealPresence Group 700
6144 kbps
Multipoint Call Speeds
The following table shows the maximum allowable H.323/SIP call speeds for the number of sites in a call.
Maximum speeds can be further limited by the communications equipment. Multipoint option keys are
required for some of the capabilities shown in the table. RealPresence Group 300 and 310 systems do not
support multipoint calling.
Polycom, Inc.
245
Call Speeds and Resolutions
Multipoint Call Speeds
Number of Sites in Call
Max Speed for
Each Site
Max Speed for Each Site (ICE
Enabled, Lync 2010
Max Speed for Each Site
(CCCP Lync 2010 with A/V
MCU)
3
3072 kbps
1024 kbps
664 kbps
4
2048 kbps
512 kbps
664 kbps
5
1536 kbps
384 kbps
664 kbps
6
1152 kbps
256 kbps
664 kbps
7 (RealPresence
Group 700 only)
1024 kbps
128 kbps
664 kbps
8 (RealPresence
Group 700 only)
832 kbps
128 kbps
664 kbps
Note: Lync Interoperability option and CCCP calls
These values do not apply when the Microsoft Lync Interoperability option is enabled, whether it is in a
Lync 2010 or Lync 2013 environment. When this option is enabled, all calls are CCCP calls and are
capped at 1920 kbps due to ICE restrictions.
The values in the Max Speed for Each Site (ICE Enabled, Lync 2010) column are applicable only when both
of the following criteria are met:
● The Lync Interoperability option is disabled, so that calls are negotiated with H.263 using Lync 2010
clients.
● The ICE calls go across the firewall boundary.
High-Profile Call Speeds and Resolutions
This section includes the H.264 high-profile resolutions and frame rates sent in calls between two
RealPresence Group systems. Resolutions and frame rates are based on both the call speed and the
Optimized for setting of your Camera input.
Note: Resolutions and frame rates for disparate endpoints
Due to the complexities of the systems and their capabilities, it is not possible to include tables of the
resolutions and frame rates for calls between a RealPresence Group system and a different type of
endpoint or a multipoint resource. RealPresence Group systems attempt to provide the highest
resolutions and the best frame rates in all types of calls.
The values for sharpness and motion are the same from 4 MB to 6 MB for systems that support higher call
speeds. The difference between NTSC and PAL cameras is how frame rates are calculated:
● NTSC 60 fps equals PAL 50 fps
● NTSC 30 fps equals PAL 25 fps
Polycom, Inc.
246
Call Speeds and Resolutions
The following table shows the resolutions for People video on RealPresence Group systems with NTSC
cameras in H.264 high-profile calls.
Call Speeds and Resolutions in High-Profile Calls
Camera Source
HD (1280x720x60)
HD (1920x1080x60)
Call Speed (kbps)
Motion/
Sharpness
Resolution
Max Frame
Rate (fps)
Resolution
Max Frame
Rate (fps)
<160
Motion
512x288
60
512x288
60
160-511
Motion
640x368
60
640x368
60
512-895
Motion
1024x576
60
1024x576
60
896-1727
Motion
1280x720
60
1280x720
60
>=1728
Motion
1280x720
60
1920x1080
60
<128
Sharpness
640x368
30
640x368
30
128-511
Sharpness
1024x576
30
1024x576
30
512-1023
Sharpness
1280x720
30
1280x720
30
>=1024
Sharpness
1280x720
30
1920x1080
30
The following table shows the resolutions for People video on RealPresence Group systems with NTSC
EagleEye Acoustic cameras in H.264 high-profile calls.
Call Speeds and Resolutions in High-Profile Calls for EagleEye Acoustic
Camera Source
HD (1920x1080x30)
Call Speed (kbps)
Motion/
Sharpness
Resolution
Max Frame Rate (fps)
<128
Motion/Sharpness
640x368
30
128-511
Motion/Sharpness
1024x576
30
512-1023
Motion/Sharpness
1280x720
30
>=1024
Motion/Sharpness
1920x1080
30
Multipoint Resolutions for High Definition Video
Polycom offers enhanced high definition (HD) multipoint resolutions, maximizing video quality in multipoint
conferences. This feature increases the maximum transmitting and receiving video resolutions in multipoint
video conferences. During a multipoint video conference, if any endpoints in the video conference do not
support high resolution video and transmit lower resolution video, all endpoints receive lower resolution
video.
Polycom, Inc.
247
Call Speeds and Resolutions
The maximum Multipoint Control Unit (MCU) transmitting and receiving resolutions are specified in the
following table.
MCU Resolutions
Number of Endpoints in the Video Conference
Maximum Transmitting
Resolutions
Maximum Receiving
Resolutions
1 endpoint
1080p, 60fps
1080p, 60fps
3-4 endpoints
1080p, 30fps
960x544, 30fps
5-8 endpoints
720p, 30fps
640x368, 30fps
Note: Specific limits for RealPresence Group 500, 550, and 700 systems
RealPresence Group 500 and RealPresence Group 550 systems support one endpoint as a host
system and up to 5 other endpoints in a 6-way multipoint conference; RealPresence Group 700
systems supports one endpoint as a host system and up to 7 other endpoints in an 8-way multipoint
conference.
Resolution and Frame Rates for Content Video
The high frame rates with high resolution apply only to point-to-point calls above 832 kbps. In addition, you
must set Optimized for value of your Camera input to Sharpness. Low frame rates apply if your call does
not meet these requirements.
For multipoint calls, the maximum resolution and frame rate for content is 720p @ 30 fps.
Resolution and Frame Rates for Content Video
Resolution
Encode
Resolution
Sharpness
Motion
800 x 600
800 x 600
30
60
1024 x 768
1024 x 768
30
60
1280 x 720
1280 x 720
30
60
1280 x 768
1280 x 720
30
60
1280 x 1024
1280 x 1024
30
60
1600 x 1200
1280 x 1024
30
60
1680 x 1050
1280 x 720
30
60
1920 x 1080
1920 x 1080
30
60*
*Available only when the Quality Preference setting on your RealPresence Group 310 or RealPresence
Group 500 or RealPresence Group 550 is set to Content Stream in Admin Settings > Network > IP
Network > Network Quality.
Polycom, Inc.
248

advertisement

Key Features

  • High-definition video conferencing
  • Content sharing
  • Recording
  • Multipoint calling
  • Third-party compatibility
  • Scalability
  • Security

Frequently Answers and Questions

How do I connect my computer to my Polycom RealPresence Group system?
You can connect your computer to your Polycom RealPresence Group system using the HDMI or USB ports. You can also use the system's Ethernet port to connect it to your network.
How do I place a call?
To place a call, you can use the system's touch control device, the remote control, or the web interface. You can also use speed dial to place calls to frequently contacted people.
Can I record my calls?
Yes, you can enable recording in the system settings. You can also use Polycom RealPresence Capture Server to record calls.
How do I configure my system's network settings?
You can configure your system's network settings in the web interface or the system's touch control device.
How do I set up a security profile for my system?
You can create and manage security profiles in the web interface.

Related manuals

Download PDF

advertisement