Manhattan Plaza HD•S2 Quick start manual

6
WATCH TV
Change the channel you are watching by
entering the three-digit channel number
using the number buttons on the remote
control. Or, you can press the
or
buttons to step through the channels in
order.
buttons to turn the
and
Press the
volume up or down. You can turn off the
sound altogether with the
button. The
sound comes back on when you press
again.
When subtitles are available for a
programme it is indicated by a
symbol in the browsing bar at the bottom of
the screen when you switch channels (press
‘i’ at anytime whilst watching TV to display
the bar). Press the
button to display the
subtitles menu and use the
and
buttons to move the orange highlight bar to
“English” if you want to turn on subtitles, or
.
“Off” to turn off subtitles, and then press
Browse the scheduled programmes using
the
and
buttons to move through
the channels and the
and
buttons to
move the orange highlight bar to show the
programmes showing at different times.
to switch to the programme
Press
highlighted by the orange bar. If the
programme is on at the time, the receiver
will switch to that channel immediately. If
the programme is scheduled for later on,
a reminder is set. When the programme is
about to start, a message is displayed on
screen and, after a few seconds, the receiver
automatically switches to the necessary
channel.
When you have finished with the programme
guide, return to normal TV viewing by
pressing
.
Standby - switches the
receiver on and off.
Exits a menu and returns
to the main menu.
Mute - silences the
receiver’s sound.
Exits a menu and returns
to normal TV viewing.
Plaza HD S2
0, 1 … 9 - buttons to directly
select channels, enter numeric
value in the set-up menus and to
enter your postcode.
Switches the TV SCART
output between freesat and the
TV’s tuner.
Welcome to your new freesat HD digital TV receiver.
Displays the main menu
screen.
Unpack and check
the contents of your
Manhattan Plaza HD•S2
freesat receiver pack:
Plaza HD•S2 receiver
WATCH TV
Change the channel you are watching by
entering the three-digit channel number
using the number buttons on the remote
control. Or, you can press the
or
buttons to step through the channels in
order.
When subtitles are available for a
programme it is indicated by a
symbol in the browsing bar at the bottom of
the screen when you switch channels (press
‘i’ at anytime whilst watching TV to display
the bar). Press the
button to display the
subtitles menu and use the
and
buttons to move the orange highlight bar to
“English” if you want to turn on subtitles, or
“Off” to turn off subtitles, and then press
.
Displays channel and
programme information.
Switch off your receiver by pressing the
button, and press the button again to turn
it on.
1
UNPACK
6 available audio
Displays the
menu to choose between normal
sound and audio description.
buttons to turn the
Press the
and
volume up or down. You can turn off the
sound altogether with the
button. The
sound comes back on when you press
again.
When you have finished with the interactive
services, return to normal TV viewing by
pressing
.
or
•
Switches to the next or
previous channel. Moves one
page up or down in the channel
list.
lists.
Digital text and interactive services are
available from some freesat channels, and
you can use them by following the on-screen
or the
button
prompts and pressing
while watching the channel. This displays a
menu of services available from that channel
or broadcaster.
Quick Start Guide
Turns the volume up and
down.
Switches back to the last
channel watched.
Displays your favourites
If audio description (a spoken description of
the broadcast) is available for a programme
it is indicated by an
symbol in the
browsing bar. To turn on audio description,
button to display the available
press the
audio menu and then select “English Audio
Description (MPEG)”.
You can find out the programmes scheduled
to be shown on all the freesat channels up
to eight days ahead using the
button.
Press the button and then press
.
Plaza HD • S2 Remote Control
Browse the scheduled programmes using
the
and
buttons to move through
the channels and the
and
buttons to
move the orange highlight bar to show the
programmes showing at different times.
Press
to switch to the programme
highlighted by the orange bar. If the
programme is on at the time, the receiver
will switch to that channel immediately. If
the programme is scheduled for later on,
a reminder is set. When the programme is
about to start, a message is displayed on
screen and, after a few seconds, the receiver
automatically switches to the necessary
channel.
When you have finished with the programme
guide, return to normal TV viewing by
pressing
.
Standby - switches the
receiver on and off.
Plaza HD S2
Welcome to your new freesat HD digital TV receiver.
Switches back to the last
channel watched.
Displays your favourites
Displays the main menu
screen.
UNPACK
When subtitles are available for a
programme it is indicated by a
symbol in the browsing bar at the bottom of
the screen when you switch channels (press
‘i’ at anytime whilst watching TV to display
button to display the
the bar). Press the
subtitles menu and use the
and
buttons to move the orange highlight bar to
“English” if you want to turn on subtitles, or
“Off” to turn off subtitles, and then press
.
Browse the scheduled programmes using
and
buttons to move through
the
the channels and the
and
buttons to
move the orange highlight bar to show the
programmes showing at different times.
Press
to switch to the programme
highlighted by the orange bar. If the
programme is on at the time, the receiver
will switch to that channel immediately. If
the programme is scheduled for later on,
a reminder is set. When the programme is
about to start, a message is displayed on
screen and, after a few seconds, the receiver
automatically switches to the necessary
channel.
When you have finished with the programme
to normal TV viewing by
guide, return
.
pressing
Switches the TV SCART
output between freesat and the
TV’s tuner.
Displays your favourites
Displays the subtitles menu
to select a subtitle type.
Displays interactive and
digital text services (where
available).
Displays the channel list.
Quick Start Guide
Plaza HD • S2
Welcome to your new freesat HD digital TV receiver.
1
Turns the volume up and
down.
UNPACK
Unpack and check
the contents of your
Manhattan Plaza HD•S2
freesat receiver pack:
Switches to the next or
previous channel. Moves one
page up or down in the channel
list.
Displays the available audio
6 between normal
menu to choose
sound and audio description.
Plaza HD•S2 receiver
WATCH TV
Change the channel you are watching by
entering the three-digit channel number
using the number buttons on the remote
control. Or, you can press the
or
buttons to step through the channels in
order.
Press the
and
buttons to turn the
volume up or down. You can turn off the
sound altogether with the
button. The
sound comes back on when you press
again.
Displays channel and
programme information.
When subtitles are available for a
programme it is indicated by a
symbol in the browsing bar at the bottom of
the screen when you switch channels (press
‘i’ at anytime whilst watching TV to display
the bar). Press the
button to display the
subtitles menu and use the
and
buttons to move the orange highlight bar to
“English” if you want to turn on subtitles, or
“Off” to turn off subtitles, and then press
.
Browse the scheduled programmes using
and
buttons to move through
the
the channels and the
and
buttons to
move the orange highlight bar to show the
programmes showing at different times.
Press
to switch to the programme
highlighted by the orange bar. If the
programme is on at the time, the receiver
will switch to that channel immediately. If
the programme is scheduled for later on,
a reminder is set. When the programme is
about to start, a message is displayed on
screen and, after a few seconds, the receiver
automatically switches to the necessary
channel.
When you have finished with the programme
guide, return to normal TV viewing by
pressing
.
Plaza HD • S Remote Control
Standby - switches the
receiver on and off.
Mute - silences the
receiver’s sound.
0, 1 … 9 - buttons to directly
select channels, enter numeric
value in the set-up menus and to
enter your postcode.
Switches back to the last
channel watched.
Displays your favourite
channels lists.
If audio description (a spoken description of
the broadcast) is available for a programme
it is indicated by an
symbol in the
browsing bar. To turn on audio description,
press the
button to display the available
audio menu and then select “English Audio
Description (MPEG)”.
Displays the main menu
screen.
Switches between available
screen display modes.
Up, down, left, right move the highlight bar in menus
and in the programme guide, and
allow you to browse the channels
and programmes.
When you have finished with the interactive
services, return to normal TV viewing by
pressing
.
or
Selects the option in a menu.
You can find out the programmes scheduled
to be shown on all the freesat channels up
to eight days ahead using the
button.
Press the button and then press
.
Exits a menu and returns
to the main menu.
Selects the option in a menu.
Switch off your receiver by pressing the
button, and press the button again to turn
it on.
Quick Start Guide
Exits a menu and returns
to normal TV viewing.
Switches the TV SCART
output between freesat and the
TV’s tuner.
Turns the volume up and
down.
Switches to the next or
previous channel. Moves one
page up or down in the channel
list.
Plaza HD • S
Welcome to your new freesat HD digital TV receiver.
1
UNPACK
Unpack and check
the contents of your
Manhattan Plaza HD•S
freesat receiver pack:
Displays the available audio
6 between normal
menu to choose
sound and audio description.
Displays channel and
programme information.
Digital text and interactive services are
available from some freesat channels, and
you can use them by following the on-screen
prompts and pressing
or the
button
while watching the channel. This displays a
menu of services available from that channel
or broadcaster.
Up, down, left, right move the highlight bar in menus
and in the programme guide, and
allow you to browse the channels
and programmes.
Switch off your receiver by pressing the
button, and press the button again to turn
it on.
Plaza HD•S receiver
Quick Start Guide
HDMI cable to connect
to an HD-ready TV
1
Guide
User
• S2
Plaza HD
User Guide
Switches between available
screen display modes.
Displays the subtitles menu
to select a subtitle type.
freesat
Quick Start
Guide
Main User
Guide
Power
supply
Remote
control
digital
HD TV
Chooses options within menus.
Find out more about freesat at
www.freesat.co.uk
Follow freesat on
www.twitter.com/freesat_TV
freesat
Like freesat on
www.facebook.com/freesat
Quick Start
Guide
Guide
User
• S2
Plaza HD
receiver
Batteries for the
remote control
Displays interactive and
digital text services (where
available).
Displays the channel list.
Displays the programme
guide.
Displays the subtitles menu
to select a subtitle type.
Main User
Guide
Batteries for the
remote control
Remote
control
digital
HD TV
receiver
HDMI cable to connect
to an HD-ready TV
Displays interactive and
digital text services (where
available).
Displays the channel list.
Displays the subtitles menu
to select a subtitle type.
Displays interactive and
digital text services (where
available).
Displays the channel list.
Displays the programme
guide.
Exits a menu and returns
to the main menu.
Exits a menu and returns
to normal TV viewing.
0, 1 … 9 - buttons to directly
select channels, enter numeric
value in the set-up menus and to
enter your postcode.
Switches back to the last
channel watched.
Displays the main menu
screen.
Digital text and interactive services are
available from some freesat channels, and
you can use them by following the on-screen
or the
button
prompts and pressing
while watching the channel. This displays a
menu of services available from that channel
or broadcaster.
Displays the programme
guide.
Switch off your receiver by pressing the
button, and press the button again to turn
it on.
de
User Gui
Plaza HD • S2 Remote Control
Standby - switches the
receiver on and off.
Mute - silences the
receiver’s sound.
lists.
If audio description (a spoken description of
the broadcast) is available for a programme
it is indicated by an
symbol in the
browsing bar. To turn on audio description,
press the
button to display the available
audio menu and then select “English Audio
Description (MPEG)”.
When you have finished with the interactive
services, return to normal TV viewing by
pressing
.
or
Selects the option in a menu.
Plaza HD•S2 receiver
WATCH TV
Change the channel you are watching by
entering the three-digit channel number
using the number buttons on the remote
or
control. Or, you can press the
buttons to step through the channels in
order.
buttons to turn the
and
Press the
volume up or down. You can turn off the
sound altogether with the
button. The
sound comes back on when you press
again.
Up, down, left, right move the highlight bar in menus
and in the programme guide, and
allow you to browse the channels
and programmes.
Unpack and check
the contents of your
Manhattan Plaza HD•S2
freesat receiver pack:
Switches to the next or
previous channel. Moves one
page up or down in the channel
list.
Displays 6the available audio
menu to choose between normal
sound and audio description.
You can find out the programmes scheduled
to be shown on all the freesat channels up
to eight days ahead using the
button.
.
Press the button and then press
Switches between available
screen display modes.
Selects the option in a menu.
•
1
Turns the volume up and
down.
Switches between available
screen display modes.
When you have finished with the interactive
services, return to normal TV viewing by
pressing
.
or
Up, down, left, right move the highlight bar in menus
and in the programme guide, and
allow you to browse the channels
and programmes.
Quick Start Guide
Switches the TV SCART
output between freesat and the
TV’s tuner.
Displays channel and
programme information.
Digital text and interactive services are
available from some freesat channels, and
you can use them by following the on-screen
prompts and pressing
or the
button
while watching the channel. This displays a
menu of services available from that channel
or broadcaster.
You can find out the programmes scheduled
to be shown on all the freesat channels up
to eight days ahead using the
button.
Press the button and then press
.
Exits a menu and returns
to the main menu.
Exits a menu and returns
to normal TV viewing.
0, 1 … 9 - buttons to directly
select channels, enter numeric
value in the set-up menus and to
enter your postcode.
lists.
If audio description (a spoken description of
the broadcast) is available for a programme
it is indicated by an
symbol in the
browsing bar. To turn on audio description,
press the
button to display the available
audio menu and then select “English Audio
Description (MPEG)”.
Plaza HD • S2 Remote Control
Mute - silences the
receiver’s sound.
Chooses options within menus.
Find out more about freesat at
www.freesat.co.uk
Follow freesat on
www.twitter.com/freesat_TV
Like freesat on
www.facebook.com/freesat
Quick Start
Guide
Main User
Guide
Batteries for the
remote control
HDMI cable to connect
to an HD-ready TV
freesat
digital
HD TV
receiver
Find out more about freesat at
www.freesat.co.uk
For assistance, please call the
Manhattan helpline on
020 8450 0005
Chooses options within menus.
Remote
control
or visit our website at
www.manhattan-tv.com
Join in at
community.freesat.co.uk
Follow freesat on
www.twitter.com/freesat_TV
Like freesat on
www.facebook.com/freesat
Quick Start
Guide
Main User
Guide
Batteries for the
remote control
Chooses options within menus.
v1
HDMI cable to connect
to an HD-ready TV
Find out more about freesat at
www.freesat.co.uk
For assistance, please call the
Manhattan helpline on
020 8450 0005
Displays the programme
guide.
Remote
control
or visit our website at
www.manhattan-tv.com
Join in at
community.freesat.co.uk
Follow freesat on
www.twitter.com/freesat_TV
Like freesat on
www.facebook.com/freesat
2
4
CONNECT TO A DISH
SWITCH ON
Remove the battery compartment cover
from the back of the Plaza HD•S2 remote
control by lifting it up while pushing the catch.
Insert the two AAA sized batteries as marked
on the inside of the compartment. Replace
the compartment cover.
To receive freesat you must
connect your Plaza HD•S2 receiver
to an appropriate satellite dish,
fixed in position and accurately
pointed at 28.2° East satellite
position.
For safety reasons and to provide
reliable reception, we strongly
recommend that the dish is
professionally installed. If you have
any questions about the dish, please
consult your installer.
3
5
TUNE IN
When the first installation step is displayed,
use the and buttons to select the screen
type of your television (16:9 Widescreen or the
squarer 4:3 Traditional). Press the
button
to highlight the HDMI Resolution selection
box, and then use the
and
buttons to
select the correct resolution for your television
(see your television’s manual for guidance, or
select 720p if unsure).
to select “Next” and then press
Press
to display the next installation step.
Turn on your TV set and choose the HDMI
input (see your television manual).
PLUG IN
Place your Plaza HD•S2 receiver
on a firm, level surface close to
your television, a mains electricity
socket, and the cable from the dish.
Switch on the mains socket the Plaza HD•S2
is connected to. The power indicator light on
the front will illuminate blue to indicate the
receiver has been turned on successfully.
After a few seconds, step one of the freesat
installation process will be shown on the
television screen.
Connect the cable from your dish
to the LNB IN socket at the back of
the receiver.
Make sure your television is turned
off and connect the HDMI cable to the
HDMI socket on the rear of the Plaza
HD•S2 and to an HDMI socket on your
television. If you need more guidance,
check your television manual.
Plug the mains power lead from the
back of the receiver into an available
mains socket that is turned off.
B4
To watch On Demand TV services including BBC iPlayer
and ITV Player, the Plaza HD-S2 must be connected
to your internet router or hub using an ethernet cable
(not supplied). Plug one end of the ethernet cable into
the ETHERNET socket at the back of the Plaza HDS2, and the other into your hub or router. Make sure
the connections are fully pushed in - you’ll hear a click
as they lock into place. Consult your router or hub’s
documentation for further guidance.
If you do not see this screen (pictured
opposite), please refer to the Troubleshooting
section in the main user guide.
When the signal lock is successful, press
to proceed to the next step. If the signal lock
fails, please see the Troubleshooting section
in the main user guide.
Enter your postcode, pressing the number
buttons an appropriate number of times
to produce the letters (printed above each
button) and numbers required, in the same
way as ‘texting’ on a mobile phone. You do not
need to enter a space. If you make a mistake,
the button deletes the previous character.
once to confirm the postcode
Now press
and again to start the channel scan.
Your Plaza HD•S2 receiver will take a couple of
minutes to find and store the freesat channels
available, displaying the total number of
freesat TV and radio channels found. Press
the
button to display the next installation
step.
Enter your choice of PIN (used to lock certain
channels and functions) by pressing the
required number button (0, 1 … 9) for each of
to proceed to the
the four PIN digits. Press
next step.
Setup is now complete. Your PIN number will
be displayed on-screen along with reminder to
make a note of it. When ready, press
and
enjoy watching freesat digital TV.