Infinity Reference 6422cf Specifications

Infinity Reference 6422cf Specifications

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Infinity Reference 6422cf Specifications | Manualzz

aud io ca r

I N F I N I T Y ® R E F E R E N C E S P E A K E R S

Looking for a more moving audio experience? Take Infinity ® car audio for a ride.

Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition. So expect extreme output from these speakers, but be prepared for accuracy and detail that may surprise you. Infinity Reference Series loudspeakers continue to be the top-selling premium speakers in the world. For instance, the 6-1/2-inch Reference coaxial model has been the number-one-selling car audio multielement speaker for four years straight. With proprietary features such as patentpending Plus One ® cones, true 4-ohm topology, UniPivot ™ (patent no. 6,002,780) edge-driven tweeters and the industry-leading Intermount III (patent no. 6,505,705) and I-Mount ™

(patent no. 5,859,917) mounting systems, as well as the Starfish ™ tweeter-mounting adapter, Reference Series speakers leave the competition scrambling to keep up.

m u l t i e l e m e n t s

T E X T I L E - D O M E T W E E T E R S

EDGE-DRIVEN

U N I P I V O T

TO ENSURE PROPER IMAGING

P L U S O N E

POLYPROPYLENE WOOFER CONES

PLUS ONE

®

CONES

This patent-pending technology delivers a cone with more surface area than that in competing models of the same size. This increase can be as much as 30 percent, depending on the individual speaker model. The benefit is increased bass output and maximized efficiency.

TRUE 4-OHM TOPOLOGY

All Reference Series speakers include reduced voice-coil impedance to extract the most power possible from any and all amplifiers designed to drive loads of 4 ohms or less. Many factory-installed systems incorporate

2-ohm speakers and include amplifiers designed to drive those loads. Merely replacing those reduced-impedance speakers with conventional 4-ohm models is hardly an upgrade, since the power output from the amplifier will be reduced. True 4-ohm topology addresses this as well.

EDGE-DRIVEN, TEXTILE-

DOME TWEETERS

These are not commonly used W-domes, but fully edge-driven dome tweeters like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels.

4 0 2 2 i 5 0 2 2 i 6 0 2 2 i 6 0 2 2 s i 9 6 2 2 i

4" (100mm) Two-Way Loudspeaker

Plus One ® (patent pending) woofer cone

Edge-driven, textile-dome tweeter

2-Ohm impedance

Sensitivity: 92dB

Frequency response: 85Hz – 21kHz

Power handling, RMS: 35 watts

Power handling, peak: 105 watts

5-1/4" (130mm)

Two-Way Loudspeaker

Plus One ® (patent pending) woofer cone

Edge-driven, textile-dome tweeter with UniPivot ™ (patent no. 6,002,780)

2-Ohm impedance

Sensitivity: 92dB

Frequency response: 67Hz – 21kHz

Power handling, RMS: 45 watts

Power handling, peak: 135 watts

6-1/2" (160mm)

Two-Way Loudspeaker

Plus One ® (patent pending) woofer cone

Edge-driven, textile-dome tweeter with UniPivot ™ (patent no. 6,002,780)

Intermount III (patent no. 6,505,705) woofer-mounting system

2-Ohm impedance

Sensitivity: 93dB

Frequency response: 53Hz – 21kHz

Power handling, RMS: 60 watts

Power handling, peak: 180 watts

6-1/2" (160mm ) Two-Way

Shallow-Mount Loudspeaker

Plus One ® (patent pending) woofer cone

Edge-driven, textile-dome tweeter

Intermount III (patent no. 6,505,705) woofer-mounting system

2-Ohm impedance

Sensitivity: 93dB

Frequency response: 53Hz – 21kHz

Power handling, RMS: 50 watts

Power handling, peak: 150 watts

6" x 9" Two-Way Loudspeaker

Plus One ® (patent pending) woofer cone

Edge-driven, textile-dome tweeter with

UniPivot ™ (patent no. 6,002,780)

2-Ohm impedance

Sensitivity: 94dB

Frequency response: 46Hz – 21kHz

Power handling, RMS: 100 watts

Power handling, peak: 300 watts

m u l t i e l e m e n t s

9 6 2 3 i 3 0 2 2 c f

6" x 9" Three-Way Loudspeaker

Plus One ® (patent pending) woofer cone

Textile-dome midrange and edge-driven, textile-dome tweeter

2-Ohm impedance

Sensitivity: 94dB

Frequency response: 46Hz – 21kHz

Power handling, RMS: 100 watts

Power handling, peak: 300 watts

3-1/2" (87mm)

Two-Way Loudspeaker

Plus One ® (patent pending) woofer cone

Balanced-dome tweeter

2-Ohm impedance

Sensitivity: 91dB

Frequency response: 85Hz – 21kHz

Power handling, RMS: 25 watts

Power handling, peak: 90 watts

6 4 2 2 c f

4" x 6" Two-Way Loudspeaker

Plus One ® (patent pending) woofer cone

Edge-driven, textile-dome tweeter

OEM replacement – fits GM, Nissan

2-Ohm impedance

Sensitivity: 91dB

Frequency response: 72Hz – 21kHz

Power handling, RMS: 40 watts

Power handling, peak: 120 watts c o m p o n e n t s

6422cfp 6822cf 5020cs 6820cs 6020cs 1021t

4" x 6" Two-Way

Plate Loudspeaker

Plus One ® (patent pending) woofer cone

Edge-driven, textile-dome tweeter

2-Ohm impedance

Sensitivity: 91dB

Frequency response: 72Hz – 21kHz

Power handling, RMS: 45 watts

Power handling, peak: 135 watts

6" x 8"/5" x 7"

Two-Way Loudspeaker

Plus One ® woofer cone

(patent pending)

5-1/4" (130mm) Two-Way

Component System

Plus One ® (patent pending) woofer cone

6" x 8"/5" x 7" Two-Way

Component System

Plus One ® (patent pending) woofer cone

6-1/2" (160mm) Two-Way

Component System

Plus One ® (patent pending) woofer cone

1" (25mm)

Textile-Dome Tweeter

Edge-driven motor structure

Edge-driven, textile-dome tweeter with UniPivot ™ (patent no. 6,002,780)

Edge-driven, textile-dome tweeter

2-Ohm impedance

Sensitivity: 93dB

Frequency response: 49Hz – 21kHz

Power handling, RMS: 60 watts

Power handling, peak: 180 watts

Edge-driven, textile-dome tweeter Edge-driven, textile-dome tweeter

I-Mount ™ (patent no. 5,859,917) tweeter kit with Starfish ™ OEM adapter

I-Mount ™ (patent no. 5,859,917) tweeter kit with Starfish ™ OEM adapter

I-Mount ™ (patent no. 5,859,917) tweeter kit with Starfish ™ OEM adapter

Outboard passive crossovers with tweeter-level adjustment

2-Ohm impedance

Sensitivity: 92dB

Frequency response: 67Hz – 21kHz

Outboard passive crossovers with tweeter-level adjustment

2-Ohm impedance

Sensitivity: 93dB

Frequency response: 49Hz – 21kHz

I-Mount ™ (patent no. 5,859,917) tweeter kit with Starfish ™ OEM adapter

In-line crossover network

2-Ohm impedance

Outboard passive crossovers with tweeter-level adjustment

Sensitivity: 93dB

Frequency response: 2.5kHz – 21kHz

2-Ohm impedance

Power handling, RMS: 50 watts

Sensitivity: 93dB

Power handling, peak: 150 watts

Frequency response: 53Hz – 21kHz

Power handling, RMS: 75 watts Power handling, RMS: 90 watts Power handling, RMS: 90 watts

Power handling, peak: 225 watts Power handling, peak: 270 watts Power handling, peak: 270 watts

250 Crossways Park Drive, Woodbury, NY 11797 USA

516.674.4INF (4463) Fax 516.682.3556

www.infinitysystems.com

© 2008 Harman International Industries, Incorporated.

All rights reserved. Part No. INFREFSPKRPI3-08

Features, specifications and appearance are subject to change without notice. Designed, edited and digitally produced by the

Harman Consumer Group Marketing & Design Center, Woodbury, NY.

Infinity and Plus One are trademarks of Harman International

Industries, Incorporated, registered in the United States and/or other countries. I-Mount, UniPivot and Starfish are trademarks of

Harman International Industries, Incorporated.

advertisement

Related manuals

Download PDF

advertisement