Feel Design
User
& Installation Guide
USER GUIDE
1. PRECAUTIONS
1
2. PRODUCT INFORMATIONS
3
3. POWER ON / OFF
5
4. PLAYER FUNCTION
6
5. TRANSCODING TOOL
11
6. TECHNICAL SPECIFICATIONS
14
Do not touch power supply adapter with wet hands.
Otherwise, it may cause an electric shock
Use standard power supply adapter.
Otherwise, it may cause damage to this player by using a
non-Standard power supply adapter
Make sure power supply faucet connected to correct
underground cable.
Otherwise, it may cause an electric shock
Make sure power supply adapter plugged in socket tightly.
Otherwise, it may cause fire.
Do not play too long with max volume.
Otherwise, it may cause harm to your hearing.
Do not strike the player.
Otherwise, it may damage the player
Do not wear earphones when driving.
Otherwise, it may cause accident.
If this player gives off smoke or heat, please stop using it
immediately and contact customer service centre.
Keep on using this player will be dangerous.
Keep this player between 0°c and 40°c.
Do not put player in dust or damp condition.
Otherwise, it may damage the player.
Do not expose player in sun shine directly.
Otherwise, it may damage the player
Do not put the player close to a credit card, etc…
Otherwise, it may damage magnetic parts of credit card,
etc …
Please clean player by cleaning and soft cloth, do not use
any detergent.
Otherwise, it may damage the player.
Do not let dust or liquid matter into the player.
Otherwise, it may damage the player.
If it happens, please contact customer service centre.
Do not take apart or fix player by yourself.
Otherwise, it may damage the player.
Do not make player fall.
Otherwise, it may damage to the player.
PRODUCT INFORMATIONS
Product functions
Compatible with audio format
MP3/WMA/WAV format.
Compatible with video format
AVI/ASF format.
Support function of picture browsing
JPEG/BMP/GIF/PNG format.
Support function of E-book
E-book files in TXT format (in ANSI)
Support function of FM radio
Frequency ranging from 87.5 to 108 MHZ
Support FLASH playing
With Macromedia Flash Lite 2.1.
Embedded with 4.3 inch TFT Touch screen
High definition pictures and videos with 16M colors.
Built-in rechargeable battery
Extra batteries are not necessary.
Conversion Software
Convert video file which is unable to be played into playable format with conversion software.
Package Content
1. PMP
2. Manual
3. AC adapter
4. AV in cable
5. USB line
6. Earphone
7. Carry case
Function display
Connection
External audio connection: with double jack line connection
Stereo earphone connection: plugged needed for radio reception
Connect with TV: with supplied audio/video cable, for TV input
Computer connection thanks to USB cable
Caution: Unexpected interruption may cause damage to this product!
Charge
Tips: During recharge, please don’t pull out plug, the product will be damaged.
Recharge mode
Connect AC adapter to charge. In recharging mode, indicator is red and go out when battery is full
Charge indication
POWER ON / POWER OFF
Power on
Long press “POWER” 3-5 seconds, indicator will turn green.
Power off
Long press “POWER” 3-5 seconds, indicator will go out.
PLAYER FUNCTION OPERATION INSTRUCTION
Main menu interface
9 icons on main menu interface.
On the bottom bar : volume, power, time (as picture)
Tips: This product is compatible with Windows 98Se, Me, Windows 2000, Windows XP,
Windows Vista, MAC OS 10 etc.
Video
Select “Video” to enter into video browser to display video files.
Press “Video” to display operation:
1. Loop Mode: “Current”, “All” or “Random”.
2. File Protect: “Lock” or “Unlock”.
3. Del File: “Current” or “All”.
4. Resume: Play last file played (previously saved as bookmark)
5. Exit: Select “Exit” to return to main interface
a. Press "ESC" button to stop playing, then choose " OK " or "Cancel" to save or cancel the
video bookmark, then get back to the video browser.
b. Click " " or " " icon to adjust the volume.
c. Click “
” to pause, and click “
” to resume.
” or “
” to play previous or next file.
d. Click “
e. During video play, click the center of the screen to display the tool bar. Click “
play backward or forward. Click “
” to play again.
’ or “
” to
Tips: Forward or Backward function is under condition of video playing.
Audio
Select “Audio” to enter into audio browser to display audio files.
Click “audio” to display operation:
1. Loop Mode: “Current”, “All” or “Random”.
2. File Protect: “Lock” or “Unlock”.
3. Del File: “Current” or “All”.
4. EQ Mode: “Normal”, “Classic”, “Popular”, ”Bass” or “Rock”.
5. Exit: Select “Exit” to return to main interface
Press “ESC” button or click “
” on taskbar to stop playing, then get back to the file list. Press
“ESC” button or click “
” again to return to the main interface.
Click “+” or “-” icon to adjust volume
Click “
” to pause, and click “
” to resume.
Click “
” or “
” to play previous or next file.
During audio playing, click “
” or “
EQ mode.
Click “ ” to switch to the cycle mode.
” to play Backward or Forward. Click “
” to select the
Lyrics synchronous display
To make lyrics and music display synchronously, make sure music and lyrics files are both copied in
same MP3 folder with same file name, lyrics file name should be: *.LRC, otherwise lyrics can not be
displayed synchronously when playing music files.
Picture
Select “Picture” in main interface to enter.
Click ”Picture” to show operation:
1. Display Mode: “List” or “Slide”.
2. File Protect: “Lock” or “Unlock”.
3. Del File: “Current” or “All”.
4. Wall Paper: Make current photo as desktop background
5. On Menu: Make current photo as start-up image
6. Off Menu: Make current photo as power-off image
7. Exit: Select “Exit” to return to the main interface.
Click the photo and Click again to play.
Click ”Esc” to stop pictures browsing and return to ”file list”
Under photo viewing click the center of the screen to display next photo; you can click the "picture"
in the list of photo file, and then select "Display Mode/ Slide" to play in slide mode
.
Wall Paper:
Click "picture "under the list of picture file, and click " Wall Paper " on
the pop-up menu, then the current picture can be set as desktop background; All the pictures stored
in the player can be set as desktop background and startup/ power-off image etc.
Radio
For FM radio, earphones must be plugged as they are radio antenna.
In main interface, select “Radio” to enter into FM interface.
Default state is preset with 20 stations for your selection (click “ ” or “ ” to select)
Click “
” to adjust volume
During FM play, click “ ” to select “Manusch”, “Select” and “Auto Seek”:
Manual Search
Select “Manusch”, click “ ” or “
save, and press “Esc” to exit.
” to switch frequency; click “
”, it will ask to save, select “ok” to
Select
Select “ ”, click “ ” and “ ” to change saved frequency; click “
next saved channel; press “Esc” to exit station.
” and “
” to switch previous or
Auto Search
Select “Auto Seek” and click “ok”, FM will search automatically (87.5 MHz-108 MHz) and save each
station searched to preset spot (former preset station will be covered), if 20 preset stations are
saved, auto search function will stop, and automatically switch to effective radio; press “Esc” to exit.
Record
Recording modes: one is built-in MIC, the other is audio recording through external Line In.
In record function, you can switch MIC recording or audio recording through “ ”
MIC recording
Click “
” to start recording, click “
” to pause recording and click “ ” to stop recording.
After record paused or stopped, player can save recorded file and exit recording by pressing “Esc”.
MIC recording file: Bit ratio 32kbps; Sampling ratio 8 KHz; File extension name WAV
Line in
Please connect one end of Line-in to output port of audio device (such as earphone jack etc), the
other end will be connected with AV-In jack of the player.
Switch to “AV-In”, Click “
” to start recording, click “
” to pause recording and click “ ” to stop
recording.
When paused or stopped record, player can save recorded file and exit recording by pressing “Esc”.
Line In recording file: Bit ratio 64kbps; Sampling ratio 32 KHz; File extension: MP3
Flash
Select “Flash” in main interface to enter into Flash player.
Click “Flash” to pop up operation:
1. Play Flash: Click this item to play the current Flash file
2. File protect: “Lock” and “Unlock”
3. Del File: “Current” and “All”.
4. Exit: Select “Exit” to return the main interface.
After selecting Flash files, click again to play. Click “Esc” to exit Flash Player.
Caution: It is unavailable to play “forward” and “backward” during Flash files playing.
E_books
Select "E-book" to enter into E-book interface.
The format of e-book is TXT file format (ANSI);
1. Select article and read.
2. Click "
", "
" to move up and down. Click "
", "
" to move to previous page and next
page
3. Under E-book menu, click "E-Book", pop-up menu will appear:
Browse Mode: "Manual", "0.5 seconds", "1 second" or "two seconds"
File protect: “Lock” and “Unlock”
Del File: “Current” and “All”
Exit: Select “Exit” to return to main interface
4. When setup finished, press "Esc” or click “
” to exit
Tool
Select "Tool" to enter the tool menu.
Calculator
Click the number and operator to make calculate.
Notepad
To read text.
Memory
Display SD card or memory situation, set up working zones, format memory, press "
" to exit
Caution: Please backup data before formatting memory or SD Card.
Upgrade
Select “USB” or “SD” to enter upgrade mode.
VideoRecord
1. In “Tool” menu, please connect one end of video recording cable with player AV-IN Port, another
end connect with other equipment output port (such as TV and other devices)
2. Select "VideoRecord"; press "MENU" to display Setup: “Video Size” and “Video Format”.
Size: “320*240” or “640*480”
Format: "ASF" or "AVI"
" to start recording, press “
” or "Esc" to stop and return to main interface.
3. Click "
TP-Calibration
Click TP-Calibration to adjust the touch screen. Repeat clicking the middle of yellow cross cursor.
After the calibration is successful, it will automatically back to “Tool”
Setup
Select "Setup" in main interface to enter system settings.
Language
6 available languages.
Default
You can select “Yes” or "No" to recover, setup includes starting image. Data will not be changed.
Sound
Control speaker on or off in this way.
Auto off
The player can turn off as your setting. You can select time what you want.
Time
There are time and date to set, after amend click “
” to save and exit.
SPCA5050 TRANSCODING TOOL
Installation of SPCA5050 Transcoding Tool
1. Running installation program (setup.exe), select installation language.
2. Key in your name and company.
3. Choose to install Direct X 9.0c or you can directly go to next step;
4. Choose to install Windows Media Player 9.0 or you can directly go to next step;
5. Choose to install K-Lite Mega Codec or you can directly go to next step;
6. Click "install" to begin installation, if you want to change installation then click "skip step"
7.. Restart your computer; you can now use conversion tools freely.
Start:
Supported formats of common conversion
Video MPG, DAT, VOB, AVI, ASF, MOV, MP4, 3GP, WMV, RM, RMVB
Audio MP3, AC3, APE, OGG, WAV, WMA, AAC, AIFF, AU, FLAC
Picture JPG, TIFF, GIF, PNG, PCX, TGA, PBM, PPM, PGM, XPM
Steps:
1. Running SPCA5050 Transcoding application Tool.
Functions of above picture:
Add file
Select input file
Clear list
Clear file list
Browse
Select destination
Option
Setup parameters
Start
Start conversion
Stop
Stop conversion
Exit
Exit current mode of conversion
Help
Click to look help information
Progress bar: Display conversion progress
2. Click ”Add File”, then select input files (This software supports multi-selection).
3. If you want to set parameters for output file, please click ”Setting”.
Functions of picture:
Movie Encoder:
XVID, MPEG4;
15-30 (Frame rate Number of displayed frame per second
Frame Rate
Quality
Frame size:
50-100 better the quality is, larger output file size will be
Frame size settings available are: 320x240, 352x288, 640x480, and
720x480
MP3
48kbps, 16000Hz, stereo
Encoder:
Format
Caution
Output file will cover existing file which has same name in folder.
4. Click Start for file conversion.
General Malfunctions and solutions
1. Cannot Start up.
Player may be out of battery. Connect it to AC adapter, recharge for around 10 mn and try again.
2. Shut down automatically after start up.
a. Not enough power leads to auto-off.
b. “Auto-Off” function has been activated.
3. Cannot recharge.
Make sure AC adaptor is connected or plugged with jack. Be sure right adaptor is used.
4. Buttons do not work.
Press “RESET” to restart. If it still does not work, please take it to after sales department.
5. Data only read from SD card.
Set “Memory” in “Tool” as working area after SD card inserted.
6. If the touching not work or touch not exactly, please do TP-Calibration.
TECHNICAL SPECIFICATIONS
Dimension
Weight
121.2mm*76mm*17.5mm
160g
Screen
4.3" TFT touch panel/480*272 RGB
Battery
Built-In 1800mAH Lithium Battery
Adaptor
100~240V 50/60Hz AC input; 5V/2A DC output
Memory
512MB~8GB
SD Card
32MB~4GB
Audio
Video
Flash
Radio
Picture
E-book
Video Recording
Audio Recording
USB
Languages
Systems
Other Features
Format
MP3,WMA,WAV
Bit Rate
32KB/S
Sampling Rate
16 / 24 / 32 / 44.1 / 48KHZ
Format
ASF(MPEG-4), AVI(XVID)
Frame
4 M bps
Rate
Bit Rate
30 frames/s
Support Macromedia Flash Lite 2.1
S/N:30dB; 20 preset channels
87.5-108MHZ
JPEG/BMP/GIF/PNG , with functions of slide, background music and
image preview.
Pixel
TXT
8 Million
Max File
3MB
ANSI File Size<4.0M, Support Bookmark
Format
ASF,
AVI
Format
WAV(PCM, ADPCM) MP3
Sampling Rate
8KHz. 32Kbps/32KHz. 64K bps
Output
3.5mm stereo/video joint
Input
3.5mm stereo/video joint
USB 2.0
English, German, French, Italian, Spanish, Portuguese
Windows 98/98SE/ME/2000/XP/VISTA – MAC OS
Calculator, Calendar
">
