Open OPEN824RLW manual
Open OPEN824RLW is a versatile device that combines advanced networking and VoIP capabilities. With its ability to establish secure PPP connections and configure VoIP settings, it offers a reliable and feature-rich solution for both home and business use. Easily accessible through a web browser interface, the OPEN824RLW empowers you to customize your network and enjoy seamless voice calls over the internet.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
O P E N 8 2 4
R
L W /
/
R
L
R o u t t e r r
Configuring PPP And SIP
C o p y r r i i g h t t
Copyright © 2005 OPEN Networks Pty Ltd. All rights reserved. The content of this manual is subject to change without notice.
The information and messages contained herein are proprietary to OPEN Networks Pty Ltd. No part of this manual may be translated, transcribed, reproduced, in any form, or by any means without prior written permission by OPEN Networks Pty Ltd.
D i i s c l l a i i m e r r
.
For content and procedures available in this document, OPEN Networks Pty Ltd does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed.
Revision Number: 2.1
Date Released: 19 May 2006
OPEN824RLW/RL Router
Configuring PPP And SIP
Table of Contents
Logging Into The OPEN824 And Setting Up PPP Connection ................................... 4
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 1
OPEN824RLW/RL Router
Configuring PPP And SIP
Introduction
Purpose
This Application Note provides step-by-step instructions for configuring advanced functions on the
OPEN824.
The following key areas are addressed:
Logging into the OPEN824;
Setting up PPP session;
Configuring VoIP;
Saving configuration.
Audience
This Application Note is intended for a technical audience. It is assumed that the reader is familiar with IP Networking and LAN/WAN technologies.
Requirements
You will need the following:
1
2
An OPEN824.
A computer connected to the OPEN824 via the LAN or wireless port with an operational
Internet browser.
3
An Analogue Phone connected to one of the phone ports.
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 2
OPEN824RLW/RL Router
Configuring PPP And SIP
Hardware Set Up
Connect the power to the OPEN824;
Connect your OPEN824 LAN port to the Ethernet port of your computer using an
Ethernet Cable or connect wirelessly;
Connect the analogue phone to Phone Port 1 on the OPEN824;
Connect your ADSL telephone line to the OPEN824 ADSL port;
Ensure that your computer is set to Obtain an IP Address Automatically.
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 3
OPEN824RLW/RL Router
Configuring PPP And SIP
Logging Into The OPEN824 And Setting Up PPP Connection
step 1
Access the OPEN824 by opening your computer’s web browser and typing the following in the Address bar: http://192.168.1.254.
Note: If you have changed the LAN IP address from the default you will need to connect to the new address.
step 2
At the Connect to.. screen, in the Username field, enter admin, and in the Password field enter admin, then click OK.
The following appears:
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 4
OPEN824RLW/RL Router
Configuring PPP And SIP
step 3
Click
In the Quick Start screen:
In the Connection area of the screen, from the Encapsulation drop-down list, highlight
PPPoE;
Leave the VPI, VCI and NAT settings as the default;
If using a static IP address complete the following Optional Settings area of the screen, enter a static IP, subnet and default gateway in the IP Address, SubNetmask and Default
Gateway fields;
In the DNS area of the screen, select Obtain DNS automatically. If using a static IP address you may need to enter the primary and secondary DNS addresses in the
Primary DNS and Secondary DNS fields;
In the PPP area of the screen, enter your username and password as provided by your
ISP in the Username and Password fields;
Click Apply and OK to Successful dialog box.
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 5
OPEN824RLW/RL Router
Configuring PPP And SIP
The following screen displays indicating the connection status.
Congratulations! You are now ready to browse the Internet!
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 6
OPEN824RLW/RL Router
Configuring PPP And SIP
Setting Up The VoIP Connection
From the Status screen,
step 1
Click Configuration, then VoIP, then General Settings from the menu list. The following appears:
step 2
Complete the following:
In The SIP Device Parameters area of the screen, set the region to Australia from the
Region drop-down list;
In the Setting for Phone Port 1 area of the screen, enter the Registrar IP Address or hostname in the Registrar Address (or Hostname) field;
Leave the Registrar Port at the default unless instructed otherwise by your service provider;
NOTE:
If the User Domain/Realm and Outbound Proxy fields are empty, these fields are the same as the Registrar Address.
In the User Domain/Realm field, enter the domain only if different from the Registrar
Address;
In the Outbound Proxy field, enter a proxy server only if different from the Registrar
Address;
Click Apply.
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 7
OPEN824RLW/RL Router
Configuring PPP And SIP
step 3
Click Wizard, under the VoIP heading. The following appears:
step 4
Complete the following In The Settings for Phone Port 1:
Select your SIP Service (setup in the previous screen) from the drop down list;
In the Phone Number field, enter your Phone Number;
In the Authentication Username field, enter your Username if different to the Phone
Number;
In the Authentication Password field, enter your SIP password;
Click Apply, the screen returns to the General Settings screen;
step 5
In General Settings screen, click Sync Now next to the configured Phone port to activate the VoIP connection.
NOTE:
Your VoIP LED will light up if successfully connected.
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 8
OPEN824RLW/RL Router
Configuring PPP And SIP
step 6
To verify your VoIP service is ready, click Phone Port from the VoIP menu.
Check the Phone port is registered.
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 9
OPEN824RLW/RL Router
Configuring PPP And SIP
Saving Your Configuration
step 1
Click
step 2
Click appears:
step 3
Click
Congratulations! You can now make VoIP calls!
OPEN Networks Pty Ltd www.opennw.com
Commercial in Confidence
Page 10
advertisement