Nokia XpressMusic 5530 mobile phone User Guide

Nokia 5530 XpressMusic User Guide

Issue 4

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this RM-504 product is in compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/declaration_of_conformity/.

© 2009 Nokia. All rights reserved.

Nokia, Nokia Connecting People, Nokia Care, Ovi, and XpressMusic are trademarks or registered trademarks of Nokia

Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

This product includes software licensed from Symbian Software Ltd ©1998-2009. Symbian and

Symbian OS are trademarks of Symbian Ltd.

Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http:// www.mpegla.com

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS

LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT

DAMAGES HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF

ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS

DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR

NOTICE.

Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law.

Insofar as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors.

The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party applications. BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED

AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.

YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS,

TRADEMARKS, OR OTHER RIGHTS.

The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options.

Export controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.

Model number: 5530

/Issue 4 EN

Contents

Safety...........................................8

About your device......................................8

Network services.......................................9

ActiveSync...................................................9

Magnets and magnetic fields.................10

1. Find help................................11

In-device help..........................................11

Support.....................................................11

Software updates using your PC............12

Software updates over the air...............12

Settings.....................................................13

Access codes.............................................13

Prolong battery life.................................14

Free memory............................................14

2. Get started.............................16

Insert the SIM card..................................16

Insert the battery....................................16

Insert the memory card..........................17

Charge the battery..................................18

Keys and parts.........................................19

Stylus........................................................20

Switch the device on...............................21

Lock the keys and touch screen.............21

Home screen............................................21

Access the menu......................................22

Touch screen actions...............................22

Media key.................................................24

Change the ringing tone.........................24

Nokia support..........................................24

3. Your device............................25

Welcome...................................................25

Transfer content......................................25

Display indicators....................................26

Contacts bar.............................................27

Antenna locations...................................27

Offline profile...........................................28

Shortcuts..................................................28

Volume and loudspeaker control...........29

Sensor settings and display rotation....29

Remote lock.............................................29

Headset.....................................................30

Remove the SIM card...............................30

Remove the memory card......................31

4. Make calls..............................32

Proximity sensor......................................32

Calls ..........................................................32

During a call.............................................32

Voice mailbox .........................................33

Answer or reject a call.............................33

Make a conference call............................33

Speed dial a phone number...................34

Call waiting..............................................34

Voice dialling...........................................35

Log ...........................................................35

Recent calls............................................35

Packet data............................................36

Call duration..........................................36

Monitor all communication events.....36

5. Contacts.................................38

Save and edit names and numbers.......38

Contacts toolbar......................................38

Manage names and numbers.................38

Default numbers and addresses............38

Ringing tones, images, and call text for contacts....................................................39

Copy contacts...........................................39

SIM services..............................................39

SIM contacts..........................................40

Fixed dialling.........................................40

6. Write text..............................41

On-screen keyboard................................41

Handwriting.............................................42

Alphanumeric keypad.............................42

Icons and functions..............................42

Traditional text input...........................43

Predictive text input.............................44

Switch between text modes................44

Touch input settings...............................44

7. Messaging..............................46

Messaging main view.............................46

Write and send messages.......................46

Messaging inbox......................................47

Receive messages.................................47

Multimedia messages..........................48

Data, settings, and web service messages...............................................48

Set up e-mail............................................48

Mailbox.....................................................48

Define e-mail settings..........................48

Open the mailbox.................................49

Retrieve e-mail messages....................49

Delete e-mail messages.......................50

Disconnect from the mailbox..............50

Mail for Exchange....................................50

View messages on a SIM card................51

Cell broadcast messages.........................51

Service commands..................................51

Messaging settings..................................52

Text message settings.........................52

Multimedia message settings.............52

E-mail settings......................................53

Manage mailboxes.............................53

8. Personalise your device........54

Change the look of your device..............54

Profiles......................................................54

9. Music folder...........................55

Music player.............................................55

Play a song or a podcast......................55

Playlists..................................................56

Podcasts.................................................57

Transfer music from a computer........57

Nokia Music...........................................57

Nokia Music Store....................................58

Nokia Podcasting.....................................58

Podcasting settings..............................58

Downloads.............................................59

Radio.........................................................59

Listen to the radio................................59

Contents

Manage radio stations.........................60

10. Nokia Video Centre..............61

View and download video clips.............61

Video feeds...............................................62

My videos..................................................62

Transfer videos from your PC.................63

Video centre settings..............................63

11. Camera.................................64

Activate the camera................................64

Image capture.........................................64

On-screen controls and indicators for still image capture................................64

Capture and recording settings...........65

Capture images.....................................66

After capturing an image.....................66

Flash and video light............................66

Scenes....................................................67

Location information...........................67

You in the image — self-timer............68

Capture images in a sequence............68

Video recording.......................................68

Record videos........................................68

Video recording on-screen controls and indicators.......................................69

After recording a video clip.................69

12. Gallery.................................71

View and organise files...........................71

View images and videos.........................71

Organise images and videos..................72

13. Share online........................73

About Share online..................................73

Subscribe to services...............................73

Manage your accounts............................73

Create a post............................................74

Post files from Gallery ............................74

14. Web browser.......................75

Browse the web.......................................75

Browser toolbar.......................................76

Navigate pages........................................76

Web feeds and blogs...............................77

Contents

Widgets....................................................77

Content search.........................................77

Download and purchase items..............78

Bookmarks...............................................78

Empty the cache......................................79

Connection security.................................79

15. Positioning..........................80

Positioning with your device.................80

Network positioning...............................80

About GPS.................................................80

Check the satellite signal status.............81

Position requests.....................................81

Landmarks................................................82

GPS data...................................................82

Positioning settings................................82

16. Connectivity.........................84

Data connections and access points......84

Network settings.....................................84

Wireless LAN ...........................................84

About WLAN..........................................85

About WLAN..........................................85

WLAN connections................................86

WLAN wizard.........................................86

WLAN internet access points...............86

Operating modes..................................87

Wireless LAN settings...........................87

Access points............................................87

Create a new access point...................87

Create access point groups..................88

Packet data access points....................88

WLAN internet access points...............89

Active data connections..........................91

Synchronisation.......................................91

Bluetooth connectivity............................92

About Bluetooth connectivity.............92

Settings..................................................92

Security tips...........................................93

Send data using Bluetooth connectivity...........................................93

Pair devices...........................................93

Receive data using Bluetooth connectivity...........................................94

Block devices.........................................94

Remote SIM mode.................................95

USB............................................................95

PC connections.........................................96

Administrative settings..........................96

Packet data settings.............................96

SIP settings............................................96

Access point name control...................97

17. Search..................................98

About Search............................................98

Start a search...........................................98

18. Download!...........................99

About Download!.....................................99

Purchase and download items..............99

19. Other applications.............100

Clock........................................................100

Set time and date...............................100

Alarm clock..........................................100

World clock..........................................100

Calendar.................................................101

Calendar views....................................101

Calendar toolbar.................................101

File manager..........................................101

About File manager............................101

Find and organise files.......................101

Edit memory card...............................102

Back up files on a memory card........102

Application manager............................102

About Application manager..............102

Install applications.............................102

Remove applications..........................104

Application manager settings...........104

RealPlayer .............................................104

RealPlayer toolbar..............................105

Play video clips...................................105

Stream content over the air..............105

Recorder.................................................106

Write notes............................................106

Calculator...............................................106

Converter................................................106

Dictionary...............................................107

20. Settings.............................108

Phone settings.......................................108

Date and time settings......................108

Language settings..............................108

Display settings..................................108

Voice commands................................109

Accessory settings..............................109

Application settings...........................109

Device updates....................................110

Security settings.................................110

Phone and SIM.................................110

Certificate management.................111

Security module...............................112

Restore original settings...................112

Protected content...............................113

Notification lights...............................113

Call settings............................................114

Call settings.........................................114

Call divert............................................114

Call barring..........................................115

21. Troubleshooting................116

22. Green tips..........................119

Save energy............................................119

Recycle....................................................119

Save paper.............................................119

Learn more.............................................119

Accessories..............................120

Battery.....................................121

Battery and charger information.........121

Nokia battery authentication guidelines..............................................122

Authenticate hologram......................122

Care and maintenance............123

Recycle....................................................123

Additional safety information.............................125

Small children........................................125

Operating environment........................125

Medical devices......................................125

Implanted medical devices...............125

Contents

Hearing aids........................................126

Vehicles..................................................126

Potentially explosive environments....126

Emergency calls.....................................127

Certification information (SAR)............127

Index.......................................129

8

Safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect performance.

SWITCH OFF IN RESTRICTED AREAS

Follow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

About your device

The wireless device described in this guide is approved for use on the GSM 850, 900,

1800, and 1900 MHz networks. Contact your service provider for more information about networks.

Your device supports several connectivity methods and like computers may be exposed to viruses and other harmful content. Exercise caution with messages, connectivity requests, browsing, and downloads. Only install and use services and software from trustworthy sources that offer adequate security and protection, such as applications that are Symbian Signed or have passed the Java Verified™ testing. Consider installing antivirus and other security software on your device and any connected computer.

© 2009 Nokia. All rights reserved.

Safety

Your device may have preinstalled bookmarks and links for third-party internet sites and may allow you to access third-party sites. These are not affiliated with Nokia, and

Nokia does not endorse or assume liability for them. If you access such sites, take precautions for security or content.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

When using this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protection may prevent some images, music, and other content from being copied, modified, or transferred.

Make back-up copies or keep a written record of all important information stored in your device.

When connecting to any other device, read its user guide for detailed safety instructions.

Do not connect incompatible products.

The images in this guide may differ from your device display.

Refer to the user guide for other important information about your device.

Note: The surface of this device does not contain nickel in the platings. The surface of this device contains stainless steel.

Network services

To use the device you must have service from a wireless service provider. Some features are not available on all networks; other features may require that you make specific arrangements with your service provider to use them. Network services involve transmission of data. Check with your service provider for details about fees in your home network and when roaming on other networks. Your service provider can explain what charges will apply. Some networks may have limitations that affect how you can use some features of this device requiring network support such as support for specific technologies like WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols and language-dependent characters.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have customized items such as menu names, menu order, and icons.

ActiveSync

Use of the Mail for Exchange application is limited to over-the-air synchronisation of PIM information between the Nokia device and the authorised Microsoft Exchange server.


9

Safety

Magnets and magnetic fields

Keep your device away from magnets or magnetic fields.

10 © 2009 Nokia. All rights reserved.

1. Find help

In-device help

Your device contains instructions to help to use the applications in your device.

To open help texts from the main menu, select

Menu

>

Help

and the application for which you want to read instructions.

When an application is open, to access the help text for the current view, select

Options

>

Help

.

When you are reading the instructions, to change the size of the help text, select

Options

>

Decrease font size

or

Increase font size

.

You may find links to related topics at the end of the help text. If you select an underlined word, a short explanation is displayed. Help texts use the following indicators: Link to a related help topic. Link to the application being discussed.

When you are reading the instructions, to switch between help texts and the application that is open in the background, select

Options

>

Show open apps.

and the desired application.

Support

When you want to learn more about how to use your product or you are unsure how your device should function, see the support pages at www.nokia.com/support or your local Nokia website, www.nokia.mobi/support (with a mobile device), the Help application in the device, or the user guide.

If this does not resolve your issue, do the following:

• Restart the device: switch off the device, and remove the battery. After about a minute, replace the battery, and switch on the device.

• With the Nokia Software Updater application, update your device software regularly for optimum performance and possible new features. See www.nokia.com/ softwareupdate or your local Nokia website. Remember to back up your device data before updating the device software.

• Restore the original factory settings as explained in the user guide. Your documents and files are not deleted in the reset.

If the issue remains unsolved, contact Nokia for repair options. See www.nokia.com/ repair. Before sending your device for repair, always back up the data in your device.


11

Find help

Software updates using your PC

Software updates may include new features and enhanced functions that were not available at the time of purchase of your device. Updating the software may also improve the device performance.

Nokia Software Updater is a PC application that enables you to update your device software. To update your device software, you need a compatible PC, broadband internet access, and a compatible USB data cable to connect your device to the PC.

To get more information, to check the release notes for the latest software versions, and to download the Nokia Software Updater application, see www.nokia.com/ softwareupdate or your local Nokia website.

To update the device software, do the following:

1. Download and install the Nokia Software Updater application to your PC.

2. Connect your device to the PC using a USB data cable, and open the Nokia Software

Updater application. The Nokia Software Updater application guides you to back up your files, update the software, and restore your files.

Software updates over the air

Select

Menu

>

Applications

>

App. update

.

With Software update (network service), you can check if there are updates available for your device software or applications, and download them to your device.

Downloading software updates may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

Make sure that the device battery has enough power, or connect the charger before starting the update.

Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update.

After updating your device software or applications using Software update, the instructions related to the updated applications in the user guide or the helps may no longer be up to date.

To download the available updates, select . To unmark specific updates that you do not want to download, select the updates from the list.

To view information on an update, select the update and .

To view the status of previous updates, select .

Select

Options

and from the following:


Find help

•

{No display_text mapping for

'qtn_swupdate_option_update_with_pc.iaupdate', locale='en'}

— Update your device using a PC. This option replaces the Start update option when updates are only available using the Nokia Software Updater PC application.

•


'qtn_swupdate_option_update_history.iaupdate', locale='en'}

— View the status of previous updates.

•

Settings

— Change the settings, such as the default access point used for downloading updates.

•

{No display_text mapping for 'qtn_swupdate_option_disclaimer.iaupdate', locale='en'}

— View the Nokia licence agreement.

Settings

Your device normally has MMS, GPRS, streaming, and mobile internet settings automatically configured in the device, based on your network service provider information. You may have settings from your service providers already installed in your device, or you may receive or request the settings from the network service providers as a special message.

Access codes

If you forget any of the access codes, contact your service provider.

• Personal identification number (PIN) code — This code protects your SIM card against unauthorised use. The PIN code (4 to 8 digits) is usually supplied with the SIM card.

After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.

• PIN2 code — This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.

• Lock code (also known as security code) — The lock code helps you to protect your device against unauthorised use. The preset code is 12345. You can create and change the code, and set the device to request the code. Keep the new code secret and in a safe place separate from your device. If you forget the code and your device is locked, your device will require service and additional charges may apply. For more information, contact a Nokia Care point or your device dealer.

• Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device.


13

Find help

Prolong battery life

Many features in your device increase the demand on battery power and reduce the battery lifetime. To save battery power, note the following:

• Features that use Bluetooth coonectivity, or allowing such features to run in the background while using other features, increase the demand on battery power.

Deactivate Bluetooth connectivity when you do not need it.

• Features that use a wireless LAN (WLAN), or allowing such features to run in the background while using other features, increase the demand on battery power. The

WLAN on your Nokia device switches off when you are not trying to connect, not connected to an access point, or not scanning for available networks. To further reduce battery consumption, you can specify that your device does not scan, or scans less often, for available networks in the background.

• If you have selected

Packet data connection

>

When available

in the connection settings, and there is no packet data coverage (GPRS), the device periodically tries to establish a packet data connection. To prolong the operating time of your device, select


>

When needed

.

• If the signal strength of the cellular network varies much in your area, your device must scan for the available network repeatedly. This increases the demand on battery power.

• The backlight of the display increases the demand on battery power. In the display settings, you can adjust the display brightness and change the time-out period after which the backlight is switched off. Select

Menu

>

Settings

and

Phone

>

Display

>

Brightness

or

Light time-out

.

• Leaving applications running in the background increases the demand on battery power. To close the applications you do not use, press and hold the menu key, select

Options

>

Show open apps.

, and navigate to the application with the menu key.

Press and hold the menu key, and select

Exit

.

Free memory

To view how much space is available for different data types, select

Menu

>

Applications

>

File mgr.

.

Many features of the device use memory to store data. The device notifies you if the memory in different memory locations is low.

To free memory, transfer data to a compatible memory card (if available) or to a compatible computer.

To remove data you no longer need, use File manager or open the respective application.

You can remove the following:

• Messages in the folders in Messaging and retrieved e-mail messages in the mailbox

• Saved web pages


Find help

• Contact information

• Calendar notes

• Applications shown in Application manager that you do not need

• Installation files (.sis or .sisx) of applications you have installed. Transfer the installation files to a compatible computer.

• Images and video clips in Gallery. Back up the files to a compatible computer.


15

2. Get started

Insert the SIM card

Important: To prevent damage to the SIM card, always remove the battery before you insert or remove the card.

A SIM card may be already inserted in the device. If not, do the following:

1. Open the cover of the SIM card slot.

2. Insert a SIM card in the SIM card slot. Ensure that the contact area on the card is facing down and the bevelled corner is facing toward the device.

Push the card in.

3. Close the cover of the SIM card slot. Ensure that the cover is properly closed.

If the SIM card is not properly in place, the device can only be used in the Offline profile.

Insert the battery

Always switch the device off and disconnect the charger before removing the battery.


1. Remove the back cover by lifting it from the top end of the device.

2. Insert the battery.

3. To replace the cover, direct the bottom locking catches toward their slots, and press down until the cover locks into place.

Get started

Insert the memory card

Use only compatible microSD and microSDHC cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.

A memory card may be already inserted in the device. If not, do the following:

1. Open the cover of the memory card slot.


17

Get started

2. Insert a compatible memory card in the memory card slot.

Ensure that the contact area on the card is facing down. Push the card in. You can hear a click when the card locks into place.

3. Close the cover of the memory card slot. Ensure that the cover is properly closed.

Charge the battery

Your battery has been partially charged at the factory. If the device indicates a low charge, do the following:

1. Connect the charger to a wall outlet.

2. Connect the charger to the device.

3. When the device indicates a full charge, disconnect the charger from the device, then from the wall outlet.

You do not need to charge the battery for a specific length of time, and you can use the device while it is charging. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.


Get started

Tip: Disconnect the charger from the wall outlet when the charger is not in use.

A charger that is connected to the outlet consumes power even when it is not connected to the device.

Keys and parts

Note: The surface of this device does not contain nickel in the platings. The surface of this device contains stainless steel.

1 — Power key

2 — Loudspeaker

3 — Proximity sensor

4 — Volume/Zoom key

5 — Media key

6 — Lock switch

7 — Capture key

8 — Microphone

9 — End key

10 — Menu key

11 — Call key

12 — Touch screen

13 — Earpiece


19

Get started

14 — Camera flash

15 — Camera lens

16 — Micro USB connector

17 — Loudspeakers

18 — Nokia AV Connector (3.5 mm)

19 — Charger connector

20 — Stylus

21 — SIM and memory card slot

Do not cover the area above the touch screen, for example, with protective film or tape.

Stylus

Some functions, such as handwriting recognition, are designed to be used with a stylus. The pen stylus is located in the back cover of the device.

Important: Use only a stylus approved by Nokia for use with this device. Using any other stylus may invalidate any warranty applying to the device and may damage the touch screen. Avoid scratching the touch screen. Never use an actual pen or pencil or other sharp objects to write on the touch screen.


Get started

Switch the device on

1. Press and hold the power key.

2. If the device asks for a PIN code or lock code, enter it, and select

OK

. To delete a number, select . The factory setting for the lock code is 12345.

3. Select your location. If you accidentally select the wrong location, select

Back

.

4. Enter the date and time. When using the 12-hour time format, to switch between a.m. and p.m., select any number.

Lock the keys and touch screen

To lock or unlock the touch screen and the touch keys, slide the lock switch on the side of the device. You can also unlock the screen by pressing briefly the power key and swiping the screen. Follow the visual cues.

When the touch screen and touch keys are locked, the touch screen is switched off and the keys are inactive.

The screen and keys may be locked automatically after a period of inactivity.

To change the settings for automatic screen and key locking, select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Auto. keyguard

>

Keypad autolock period

.

Home screen

The home screen is your starting point where you can collect all your important contacts or application shortcuts.


21

Get started

Interactive display elements

To open the clock application, select the clock (1).

To open the calendar, or to change the profile, select the date or the profile name (2).

To view or change connectivity settings ( ), to see the available wireless LANs (WLAN) if WLAN scanning is enabled, or to view missed events, select the top right corner (3).

To make a phone call, select

Dialler

(4).

To open Contacts, select

Contacts

(5).

To open the main menu, press the menu key (6).

Start using the contacts bar

To start using the contacts bar, and to add your contacts to the home screen, select >

Options

>

New contact

, and follow the instructions.

Change the home screen theme

To change the home screen theme or the shortcuts, select

Menu

>

Settings

and

Personal

>

Home screen

.

Swipe to unlock

To unlock the device display, press the power key briefly and swipe the display. You can also swipe a locked display to answer a call, stop a calendar alarm, or to stop or snooze a clock alarm. Follow the visual cues.

Music keys

When music or the radio is playing in the background, music keys (play/pause, skip backward, and skip forward) are displayed in the home screen.

Access the menu

To access the menu, press the menu key.

To open an application or folder in the menu, double-tap it.

Touch screen actions

Tap and double-tap

To open an application or other element on the touch screen, you normally tap it with your finger or the stylus. However, to open the following items, you must tap them twice.


Get started

• List items in an application, such as the Drafts folder in the folder list in Messaging

Tip: When you open a list view, the first item is already highlighted. To open the highlighted item, tap it once.

• Applications and folders in the menu when using the list view type

• Files in a file list, for example, an image in the images and videos view in Gallery.

If you tap a file or similar item once, it is not opened, it becomes highlighted. To see the options available for the item, select

Options

or, if available, select an icon from a toolbar.

Select

In this user documentation, opening applications or items by tapping them once or twice is called "selecting". If you need to select several items in a sequence, the menu items to select are separated by arrows.

Example: To select

Options

>

Help

, tap

Options

, and then tap

Help

.

Drag

To drag, place your finger or the stylus on the screen, and slide it across the screen.

Swipe

Example: To scroll up or down on a web page, drag the page with your finger or stylus.

To swipe, slide your finger quickly left or right on the screen.

Example: When viewing an image, to view the next or previous image, swipe the image left or right, respectively.

Tip: When the touch screen is locked, to answer a call, or to stop a clock or calendar alarm, swipe the screen. Follow the visual cues.

Scroll

To scroll up or down in lists that have a scroll bar, drag the slider of the scroll bar.

In some list views, you can scroll by placing your finger or stylus on a list item and dragging up or down.

Example: To scroll through contacts, place your finger or stylus on a contact, and drag up or down.

Tip: To view a brief description of icons and buttons, place your finger or stylus on the icon or button. Descriptions are not available for all icons and buttons.

Touch screen backlight

The touch screen backlight is turned off after a period of inactivity. To turn the screen backlight on, tap the screen.


23

Get started

If the touch screen and keys are locked, tapping the screen does not turn the screen backlight on. To unlock the screen and keys, slide the lock switch, or press briefly the power key and swipe the screen. Follow the visual cues.

Media key

To open applications such as the music player or browser, select the media key ( ) to open the media bar, and select the application.

Tip: Hold your finger or the stylus on the icon to see the name of the application. To open the application, raise your finger or the stylus. Otherwise, slide your finger or the stylus away from the icon.

Change the ringing tone

Select

Menu

>

Settings

and

Personal

>

Profiles

.

You can use profiles to set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups. To personalise a profile, scroll to the profile, and select

Options

>

Personalise

.

Nokia support

To find the latest version of this guide, additional information, downloads, and services related to your Nokia product, see www.nokia.com/support or your local Nokia website.

Configuration settings service

To download configuration settings such as MMS, GPRS, e-mail, and other services for your phone model, see www.nokia.com/support.

Nokia Care services

If you need to contact Nokia Care services, check the list of local Nokia

Care contact centres at www.nokia.com/customerservice.

Maintenance

For maintenance services, find your nearest Nokia Care point at www.nokia.com/ repair.


3. Your device

Welcome

When you switch on your device for the first time, the Welcome application is displayed.

To access the Welcome application later, select

Menu

>

Applications

>

Welcome

.

Select from the following:

•

Sett. wizard

— Configure various settings of your device.

•

Switch

— Transfer content, such as contacts and calendar entries, from a compatible

Nokia device.

•

E-mail setup

— Configure e-mail settings.

Transfer content

You can use the Switch application to copy content such as phone numbers, addresses, calendar items, and images from your previous Nokia device to your device.

The type of content that can be transferred depends on the model of the device from which you want to transfer content. If that device supports synchronisation, you can also synchronise data between the devices. Your device notifies you if the other device is not compatible.

If the other device cannot be switched on without a SIM card, you can insert your SIM card in it. When your device is switched on without a SIM card, the Offline profile is automatically activated, and transfer can be done.

Transfer content for the first time

1. To retrieve data from the other device for the first time, on your device, select

Switch

in the Welcome application, or select

Menu

>

Applications

>

Switch

.

2. Select the connection type you want to use to transfer the data. Both devices must support the selected connection type.

3. If you select Bluetooth connectivity as the connection type, connect the two devices.

To have your device search for devices with Bluetooth connectivity, select

Continue

. Select the device from which you want to transfer content. You are asked to enter a code on your device. Enter a code (1-16 digits), and select

OK

. Enter the same code on the other device, and select

OK

. The devices are now paired.

Some earlier Nokia devices may not have the Switch application. In this case, the

Switch application is sent to the other device as a message. To install the Switch application on the other device, open the message, and follow the instructions on the display.

4. On your device, select the content you want to transfer from the other device.


25

Your device

When the transfer has started, you can cancel it and continue later.

Content is transferred from the memory of the other device to the corresponding location in your device. The transfer time depends on the amount of data to be transferred.

Display indicators

The device is being used in a GSM network (network service).

You have one or more unread messages in the Inbox folder in Messaging.

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the Outbox folder.

You have missed calls.

off.

The ringing type is set to Silent, and the message and e-mail alert tones are turned

A timed profile is active.

The touch screen and keys are locked.

A clock alarm is active.

The second phone line is being used (network service).

All calls to the device are diverted to another number (network service). If you have two phone lines, a number indicates the active line.

A compatible headset is connected to the device.

A compatible text phone is connected to the device.

A data call is active (network service).

A GPRS packet data connection is active (network service). indicates that the connection is on hold and that a connection is available.

A packet data connection is active in a part of the network that supports EGPRS

(network service). indicates that the connection is on hold and that a connection is available. The icons indicate that EGPRS is available in the network, but your device is not necessarily using an EGPRS connection to transfer data.

You have set the device to scan for wireless LANs, and a wireless LAN is available

(network service).

A wireless LAN connection is active in a network that uses encryption.

A wireless LAN connection is active in a network that does not use encryption.


Your device

Bluetooth connectivity is on.

Data is being transmitted using Bluetooth connectivity. When the indicator is blinking, your device is trying to connect with another device.

A USB connection is active.

Synchronisation is in progress.

Contacts bar

Start using the contacts bar

To start using the contacts bar and add your contacts to the home screen, select >

Options

>

New contact

, and follow the instructions.

To communicate with your contact, select the contact and from the following:

•

•

•

• — Make a phone call.

— Send a message.

— Modify contact information.

— Refresh the contact's web feeds.

To view past communication events with a contact, select a contact. Select a communication event to view event details.

To close the view, select .

Antenna locations

Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.


27

Your device

Cellular, Bluetooth, and WLAN antennas

Offline profile

To activate the Offline profile, press the power key briefly, and select

Offline

.

The Offline profile lets you use the device without connecting to the wireless network.

When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area. All wireless RF signals to and from the device are prevented. If you try to send messages, they are placed in the

Outbox folder to be sent later.

When the Offline profile is active, you can use your device without a SIM card.

If the SIM card is not properly in place, the device starts in the Offline profile.

Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.

When you have activated the offline profile, you can still use the wireless LAN, for example, to read your e-mail or browse on the internet. Remember to comply with any applicable safety requirements when establishing and using a wireless LAN connection.

You can also use Bluetooth connectivity while in the offline profile.

To switch to another profile, press the power key briefly, and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength).

Shortcuts

To switch between open applications, press and hold the menu key. Leaving applications running in the background increases the demand on battery power and reduces the battery life.

To start a web connection (network service), in the dialler, tap and hold 0.


Your device

To access applications available in the media bar, such as the music player and web browser, in any view, press the media key.

To change the profile, press the power key, and select a profile.

To call your voice mailbox (network service), in the dialler, tap and hold 1.

To open a list of last dialled numbers, in the home screen, press the call key.

To use voice commands, in the home screen, press and hold the call key.

Volume and loudspeaker control

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To adjust the volume level when you have an active call or are listening to a sound clip, use the volume key.

The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear.

To use the loudspeaker during a call, select

Activate loudsp.

.

To turn off the loudspeaker, select

Activate handset

.

Sensor settings and display rotation

When you activate the sensors in your device, you can control certain functions by turning the device.

Select

Menu

>

Settings

and

Phone

>

Sensor settings

.


•

Sensors

— Activate the sensors.

•

Turning control

— Select

Silencing calls

and

Snoozing alarms

to mute calls and snooze alarms by turning your device so that the display faces down. Select

Autorotate display

to rotate the display content automatically when you turn the device on its left side or back to a vertical position. Some applications and features may not support rotating the display content.

Remote lock

To prevent unauthorised use of your device, you can lock your device and memory card remotely using a text message. You must define the message text, and to lock your


29

Your device

device, send that text message to your device. To unlock your device, you need the lock code.

To enable remote locking and to define the text message content to be used, select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Security

>

Phone and SIM card

>

Remote phone locking

>

Enabled

. Tap the text input field to enter the text message content (5 to 20 characters), select , and verify the message. Enter the lock code.

Headset

You can connect a compatible headset or compatible headphones to your device. You may need to select the cable mode.

Some headsets come in two parts, a remote control unit and headphones. A remote control unit has a microphone and keys to answer or end a phone call, adjust the volume, and play music or video files. To use the headphones with a remote control unit, connect the unit to the Nokia AV Connector in the device, then connect the headphones to the unit.

Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV Connector.

When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia

AV Connector, pay special attention to volume levels.

Remove the SIM card

1. Remove the back cover by lifting it from the top end of the device.

2. Remove the battery.


Your device

3. Open the cover of the SIM card slot. Place the tip of the stylus in the opening under the battery, and push the

SIM card sideways to slide it out of the slot. Pull the SIM card out.

4. Replace the battery and the back cover.

Remove the memory card

Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

1. If the device is switched on, before you remove the card, press the power key, and select

Remove memory card

.

2. When

Removing memory card will close all open applications. Remove anyway?

is displayed, select

Yes

. All applications are closed.

3. When

Remove memory card and press 'OK'

is displayed, open the cover of the memory card slot.

4. Press the memory card to release it from the slot.

5. Pull out the memory card. If the device is switched on, select

OK

.


31

4. Make calls

Proximity sensor

Your device has a proximity sensor. To prevent accidental selections, the touch screen is disabled automatically during calls when you place the device next to your ear.

Do not cover the proximity sensor, for example, with protective film or tape.

Calls

1. In the home screen, select

Dialler

to open the dialler, and enter the phone number, including the area code. To remove a number, select C.

For international calls, select * twice for the + character (which replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2. To make the call, press the call key.

3. To end the call (or to cancel the call attempt), press the end key.

Pressing the end key always ends a call, even if another application is active.

To make a call from the contacts list, select

Menu

>

Contacts

. Go to the desired name.

Or, select the search field, enter the first letters or characters of the name, and go to the name. To call the contact, press the call key. If you have saved several numbers for a contact, select the desired number from the list, and press the call key.

During a call

To mute or unmute the microphone, select or .

To put a call on hold or activate the held call, select or .

Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To switch back to the handset, select .

To end the call, select .

To switch between the active and held calls, select

Options

>

Swap

.

Tip: When you have only one active voice call, to put the call on hold, press the call key. To activate the held call, press the call key again.

To send DTMF tone strings (for example, a password), select

Options

>

Send DTMF

.

Enter the DTMF string or search for it in the contacts list. To enter a wait character (w)


Make calls

or a pause character (p), press * repeatedly. To send the tone, select

OK

. You can add

DTMF tones to the phone number or DTMF field in contact details.

To end an active call and replace it by answering the waiting call, select

Options

>

Replace

.

To end all your calls, select

Options

>

End all calls

.

Many of the options that you can use during a voice call are network services.

Voice mailbox

To call your voice mailbox (network service), in the home screen, select

Dialler

, and select and hold 1.

1. To change the phone number of your voice mailbox, select

Menu

>

Settings

and

Calling

>

Call mailbox

, a mailbox, and

Options

>

Change number

.

2. Enter the number (obtained from your network service provider), and select

OK

.

Answer or reject a call

To answer a call when the touch screen is locked, swipe the screen. Follow the visual cues. To answer a call when the touch screen is unlocked, press the call key.

To mute the ringing tone of an incoming call when the touch screen is locked, swipe to unlock the screen. To mute the ringing tone of an incoming call when the touch screen is unlocked, , select .

You can send a text message without rejecting the call, informing the caller that you cannot answer the call. To activate the text message option and write a standard reply message, select

Menu

>

Settings

and

Calling

>

Call

>

Reject call with message

, and

Message text

. To send the reply message, select

Send msg.

, edit the message text, and press the call key.

If you do not want to answer a call, when the touch screen is unlocked, press the end key. If you activate the

Call divert

>

Voice calls

>

If busy

function in phone settings, rejecting an incoming call also diverts the call. To reject a call when the touch screen is locked, swipe to unlock the screen, and select

Options

>

Reject

.

Make a conference call

Your device supports conference calls between a maximum of six participants, including yourself.

1. Make a call to the first participant.

2. To make a call to another participant, select

Options

>

New call

. The first call is put on hold.


33

Make calls

3. When the new call is answered, to join the first participant in the conference call, select .

To add a new person to the call, make a call to another participant, and add the new call to the conference call.

To have a private conversation with one of the participants, select .

Go to the participant, and select . The conference call is put on hold on your device.

The other participants can still continue the conference call.

To return to the conference call, select .

To drop a participant, select , go to the participant, and select .

4. To end the active conference call, press the end key.

Speed dial a phone number

To activate speed dialling, select

Menu

>

Settings

and

Calling

>

Call

>

Speed dialling

.

1. To assign a phone number to one of the number keys, select

Menu

>

Settings

and

Calling

>

Speed dialling

.

2. Go to the key to which you want to assign the phone number, and select

Options

>

Assign

.

1 is reserved for the voice mailbox.

To call in the home screen, press the assigned key and the call key.

To call in the home screen, select

Dialler

and the assigned key, and press the call key.

To call in the home screen when speed dialling is active, select

Dialler

, and select and hold the assigned key.

Call waiting

You can answer a call when you have another call in progress.

To activate call waiting (network service), select

Menu

>

Settings

and

Calling

>

Call

>

Call waiting

.

1. To answer the waiting call, press the call key. The first call is put on hold.

2. To switch between the two calls, select

Options

>

Swap

.

3. To end the active call, press the end key.

4. To end both calls, select

Options

>

End all calls

.


Make calls

Voice dialling

Your device automatically creates a voice tag for the contacts. To listen to the synthesised voice tag, select a contact and

Options

>

Voice tag details

. Scroll to a contact detail, and select

Options

>

Play voice tag

.

Make a call with a voice tag

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances.

When you use voice dialling, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag.

1. To start voice dialling, in the home screen, press and hold the call key. If a compatible headset with the headset key is attached, press and hold the headset key to start voice dialling.

2. A short tone sounds, and

Speak now

is displayed. Say clearly the name that is saved for the contact.

3. The device plays a synthesised voice tag for the recognised contact in the selected device language, and displays the name and number. To cancel the voice dialling, select

Quit

.

If several numbers are saved for a name, you can say also the name and the number type, such as mobile or telephone.

Log

The Log application stores information about the communication history of the device.

The device registers missed and received calls only if the network supports these functions, and the device is switched on and within the network service area.

Recent calls

Select

Menu

>

Log

and

Recent calls

.

To view missed, received, and dialled calls, select

Missed calls

,

Received calls

or

Dialled numbers

.

Tip: To open the dialled numbers list in the home screen, press the call key.

•

•

•

On the toolbar, select from the following:

Call

— Call the desired contact.

Create message

— Send a message to the desired contact.

Open Contacts

— Open the contacts list.


35

Make calls

Select

Options


•

Save to Contacts

— Save the highlighted phone number from a recent calls list to your contacts.

•

Clear list

— Clear the selected recent calls list.

•

Delete

— Clear a highlighted event in the selected list.

•

Settings

— Select

Log duration

and the length of time that the communication information is saved in the log. If you select

No log

, no information is saved in the log.

Packet data

Select

Menu

>

Log

.

You may be charged for your packet data connections by the amount of data sent and received. To check the amount of data sent or received during packet data connections, select

Packet data

>

All sent data

or

All received data

.

To clear both sent and received information, select

Options

>

Clear counters

. You need the lock code to clear the information.

Call duration

Select

Menu

>

Log

.

To view the approximate duration of your last call, dialled and received calls, select

Call duration

.

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.

Monitor all communication events

Select

Menu

>

Log

.

To open the general log where you can monitor all voice calls, text messages, or data and wireless LAN connections registered by the device, select the general log tab

. Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging centre, or web pages are shown as packet data connections.

To view how much data was transferred and how long a certain packet data connection lasted, scroll to an incoming or outgoing event indicated by

GPRS

, and select

Options

>

View

.

To copy a phone number from the log to the clipboard, and paste it into a text message, for example, select

Options

>

Use number

>

Copy

.


Make calls

To filter the log, select

Options

>

Filter

and a filter.

To set the log duration, select

Options

>

Settings

>

Log duration

. If you select

No log

, all the log contents, recent calls register, and messaging delivery reports are permanently deleted.


37

5. Contacts

You can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time.

To open the contacts list, in the home screen, select

Contacts

.

Save and edit names and numbers

1. To add a new contact to the contacts list, select

Options

>

New contact

.

2. Tap a field to enter the information in the field. To close the text input, select .

Fill in the fields that you want, and select

Done

.

To edit contacts, select a contact and

Options

>

Edit

.

•

•

•

Contacts toolbar

On the contacts list toolbar, select from the following:

Call

— Call the desired contact.

Create message

— Send a message to the desired contact.

New contact

— Create a new contact.

Manage names and numbers

To copy or delete a contact, or to send a contact as a business card to another device, tap and hold a contact, and select

Copy

,

Delete

, or

Send business card

.

To delete several contacts at the same time, select

Options

>

Mark/Unmark

to mark the desired contacts, and to delete, select

Options

>

Delete

.

To listen to the voice tag assigned to a contact, select the contact and

Options

>

Voice tag details

>

Options

>

Play voice tag

.

Default numbers and addresses

You can assign default numbers or addresses to a contact. If a contact has several numbers or addresses, you can easily call or send a message to a certain number or address. The default number is also used in voice dialling.

1. In the contacts list, select a contact.


Contacts

2. Select

Options

>

Defaults

.

3. Select a default to which you want to add a number or an address, and select

Assign

.

4. Select a number or an address you want to set as a default.

5. To exit the Defaults view and save the changes, tap outside the view.

Ringing tones, images, and call text for contacts

You can define a ringing tone for a contact or group, and an image and a call text for a contact. When the contact calls you, the device plays the selected ringing tone and shows the call text or image (if the caller’s phone number is sent with the call and your device recognises it).

To define a ringing tone for a contact or a contact group, select the contact or contact group and

Options

>

Ringing tone

, and a ringing tone.

To define a call text for a contact, select the contact and

Options

>

Add call alert text

. Tap the text field to enter the call text, and select .

To add an image for a contact saved in the device memory, select the contact,

Options

>

Add image

, and an image from Gallery.

To remove the ringing tone, select

Default tone

from the list of ringing tones.

To view, change or remove the image from a contact, select the contact,

Options

>

Image

, and the desired option.

Copy contacts

When you open the contacts list for the first time, the device asks if you want to copy names and numbers from the SIM card to your device.

To start copying, select

OK

.

If you do not want to copy the contacts from the SIM card to your device, select

Cancel

. The device asks if you want to view the SIM card contacts in the contacts directory. To view the contacts, select

OK

. The contacts list opens, and the names stored on your SIM card are indicated with .

SIM services

For availability and information on using SIM card services, contact your SIM card vendor.

This may be the service provider or other vendor.


39

Contacts

SIM contacts

To set the names and numbers stored on the SIM card to be shown on the contacts list, select

Options

>

Settings

>

Contacts to display

>

SIM memory

. You can add and edit SIM contacts, or call them.

The numbers you save in the contacts list may not be automatically saved to your SIM card. To save numbers to the SIM card, select a contact and

Options

>

Copy

>

SIM memory

.

To select whether the new contacts you enter are saved to your device or your SIM card, select

Options

>

Settings

>

Default saving memory

>

Phone memory

or

SIM memory

.

Fixed dialling

Select

Menu

>

Contacts

and

Options

>

SIM numbers

>

Fixed dial contacts

.

With the fixed dialling service, you can restrict calls from your device to certain phone numbers. Not all SIM cards support the fixed dialling service. For more information, contact your service provider.

When fixed dialling is activated, calls may be possible to the official emergency number programmed into your device.

You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed dialling contacts. Contact your service provider for your PIN2 code.

Select

Options


•

Activate fixed dialling

— Activate the fixed dialing.

•

Deactivate fixed dialling

— Deactivate the fixed dialing.

•

New SIM contact

— Enter the contact name and phone number to which calls are allowed.

•

Add from Contacts

— Copy a contact from the list of contacts to the fixed dialling list.

To send text messages to the SIM contacts while the fixed dialling service is active, you need to add the text message centre number to the fixed dialling list.


6. Write text

You can enter letters, numbers, and special characters in several different ways. The onscreen keyboards allow you to enter characters by tapping them with your fingers or the stylus. Handwriting recognition allows you to write characters directly onto the screen using the stylus as a pen. Handwriting recognition may not be available for all languages.

Tap any text input field to enter letters, numbers, and special characters.

Your device can complete words based on the built-in dictionary for the selected text input language. The device also learns new words from your input.

On-screen keyboard

You can use the on-screen keyboard in landscape mode.

To activate the on-screen keyboard, select and

Full screen QWERTY

.

When using the on-screen keyboard in landscape mode and in full screen mode, you can select the keys with your fingers.

For an explanation of each key and its function, see the following figure.

1 — Close - Close the on-screen keyboard.

2 — Input menu - Open the touch input options menu to access commands such as

Writing language

.

3 — On-screen keyboard

4 — Shift and caps lock - To enter an uppercase character when writing in lowercase, or vice versa, select the key before entering the character. To activate the caps lock, select the key twice. A line under the key indicates that the caps lock is activated.

5 — Letters - Enter letters.

6 — Numbers and symbols - Enter numbers and most commonly used special characters.

7 — Character accents - Select language character accents.

8 — Space bar - Insert a space.


41

Write text

9 — Enter - Move the cursor to the next row or text input field. Additional functions are based on the current context (for example, in the web address field of the web browser, it acts as the Go button).

10 — Move - Move the touch input window. Drag the key to move the touch input window around the screen.

11 — Backspace - Delete the previously entered character.

12 — Input mode - Select the input method. When you tap an item, the current input method view closes, and the selected one opens.

Handwriting

To activate handwriting mode, tap and

Handwriting

.

Write legible, upright characters on the text input area, and leave a space between each character.

To teach the device your handwriting style, tap and

Handwriting training

.

To enter letters and numbers (default mode), write words as you would normally. To select number mode, tap in the right pane of the input area. To enter non-Latin characters, tap the corresponding icon, if available.

To write special characters, write them as you would normally.

You can also tap in the right pane of the input area, and select a desired character from the pop-up table.

To delete characters or move the cursor back, swipe backwards (see Figure 1). To insert a space, swipe forwards

(see Figure 2).

Alphanumeric keypad

Icons and functions

Use the on-screen keypad (


) to enter characters like you would with a traditional phone keypad with numbers on the keys. For an explanation of each icon and its function, see the following figure.


Write text

1 — Close - Closes on-screen keypad (


).

2 — Input menu - Opens the touch input menu, which includes commands such as

Activate predictive text

and


.

3 — Text input indicator - Opens a pop-up window, in which you can turn predictive text input modes on or off, change the character case, and switch between letter and number mode.

4 — Input mode - Opens a pop-up window, in which you can select from the available input modes. When you tap an item, the current input method view closes, and the selected one opens.

5 — Arrow keys - Moves the cursor left or right.

6 — Backspace - Deletes the previously entered character.

7 — Number keys - Enters the desired numbers or characters according to the current case and input mode.

8 — Star - Opens a special characters table.

9 — Shift - Changes the character case, turns predictive text input modes on or off, and switches between the alphabet and number modes.

Traditional text input

Tap a number key (1-9) repeatedly until the desired character appears. There are more characters available for a number key than are visible on the key.

If the next letter is located on the same key as the present one, wait until the cursor appears (or move the cursor forward to end the time-out period), and enter the letter.

To insert a space, tap 0. To move the cursor to the next line, tap 0 three times.


43

Write text

Predictive text input

With predictive text input, you can enter any letter with a single tap of a key. Predictive text input is based on a built-in dictionary to which you can add new words.

1. To activate predictive text input for all editors on the device, tap , and select

Activate prediction

, or quickly tap # twice. You can also tap , and select

Activate predictive text

.

2. To write the desired word, tap the keys 2-9. Tap each key only once for one letter.

For example, to write "Nokia" when the English dictionary is selected, tap 6 for N,

6 for o, 5 for k, 4 for i, and 2 for a.

The word suggestion changes after each tap of a key.

3. When you finish writing the word correctly, move the cursor right to confirm it, or tap 0 to add a space.

If the word is not correct, tap * repeatedly to view the matching words the dictionary has found one by one.

If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select

Spell

, enter the word using traditional text input, and select

OK

. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.

4. Start writing the next word.

Switch between text modes

To turn predictive text input off for all editors in your device, tap , and select

Deactivate prediction

or quickly double-tap#. Alternatively, you can tap , and select

Predictive text

>

Off

.

Touch input settings

Select

Menu

>

Settings

and

Phone

>

Touch input

.

To configure text input settings for the touch screen, select from the following:

•

Handwriting training

— Open the handwriting training application. Train the device to recognise your handwriting better. This option is not available in all languages.

•


— Define which language-specific characters in your handwriting are recognised and how the on-screen keyboard is laid out.

•

Writing speed

— Select a suitable writing speed.

•

Guiding line

— Show or hide the guiding line in the writing area. The guiding line helps you write in a straight line, and it also helps the device recognise your writing.

•

Pen trail width

— Select the thickness of the text written with the stylus.


•

Writing colour

— Select the colour of the text written with the stylus.

•

Adaptive search

— Activate adaptive search.

•

Touch screen calibration

— Calibrate the touch screen as instructed.

Write text


45

7. Messaging

Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.

•

•

•

•

•

Messaging main view

Select

Menu

>

Messaging

(network service).

•

•

To create a new message, select

New message

.

Tip: To avoid rewriting messages that you send often, use texts in the Templates folder in My folders. You can also create and save your own templates.

Messaging contains the following folders:

Inbox

— Received messages, except e-mail and cell broadcast messages, are stored here.

My folders

— Organise your messages into folders.

Mailbox

— Connect to your remote mailbox to retrieve your new e-mail messages, or view your previously retrieved e-mail messages offline.

Drafts

— Draft messages that have not been sent are stored here.

Sent

— The last messages that have been sent, excluding messages sent using

Bluetooth connectivity, are stored here. You can change the number of messages to save in this folder.

Outbox

— Messages waiting to be sent are temporarily stored in the outbox, for example, when your device is outside network coverage.

Delivery reports

— You can request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service).

Write and send messages

Select

Menu

>

Messaging

.

Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.

Before you can create a multimedia message or write an e-mail, you must have the correct connection settings defined.

The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit the device may make it smaller so that it can be sent by MMS.


Messaging

Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.

Check the size limit of e-mail messages with your service provider. If you attempt to send an e-mail message that exceeds the size limit of the e-mail server, the message is left in the Outbox folder, and the device attempts to resend it periodically. Sending an e-mail requires a data connection, and continuous attempts to resend the e-mail may incur charges from your service provider. In the Outbox folder, you can delete such a message or move it to the Drafts folder.

Messaging requires network services.

1. To send a text or a multimedia message, select

New message

.

To send an audio or e-mail message, select

Options

>

Create message

, and the relevant option.

2. To select recipients or groups from the contacts list, select from the toolbar; Or to enter the number or e-mail manually, tap the

To

field.

3. In the Subject field, enter the subject of the e-mail or multimedia message. If the

Subject field is not visible, select

Options

>

Message header fields

to change the fields that are visible.

4. To write the message, tap the message field.

5. To add an object to a message or e-mail, select and the relevant type of content.

The message type may change to multimedia message based on the inserted content.

6. To send the message or e-mail, select , or press the call key.

Your device supports text messages beyond the limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents or other marks, and characters from some language options, take up more space, and limit the number of characters that can be sent in a single message.

Messaging inbox

Receive messages

Select

Menu

>

Messaging

and

Inbox

.

In the Inbox folder, indicates an unread text message, an unread multimedia message, an unread audio message, and data received through Bluetooth connectivity.

When you receive a message, and

1 new message

are displayed in the home screen. To open the message, select

Show

. To open a message in the Inbox folder, select the message. To reply to a received message, select

Options

>

Reply

.


47

Messaging

Multimedia messages


You may receive a notification that a multimedia message is waiting in the multimedia message centre. To start a packet data connection to retrieve the message to your device, select

Options

>

Retrieve

.

When you open a multimedia message ( ), you may see an image and a message.

is shown if sound is included, or if video is included. To play the sound or the video, select the indicator.

To see the media objects that have been included in the multimedia message, select

Options

>

Objects

.

If the message includes a multimedia presentation, is displayed. To play the presentation, select the indicator.

Data, settings, and web service messages

Your device can receive many kinds of messages that contain data, such as business cards, ringing tones, operator logos, calendar entries, and e-mail notifications. You may also receive settings from your service provider in a configuration message.

To save the data from the message, select

Options

and the corresponding option.

Web service messages are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.

Set up e-mail

To set up e-mail, select

Menu

>

Messaging

and

Mailbox

.

You can set up several e-mail accounts, for example, a personal e-mail account and a corporate e-mail account.

To set up e-mail from your home screen, select the relevant plug-in. Alternatively, to set up an e-mail account, select

Menu

>

Applications

>

Sett. wizard

.

Mailbox

Define e-mail settings

Select

Menu

>

Messaging

and

Mailbox

.


Messaging

To use e-mail, you must have defined a valid internet access point (IAP) in the device and have defined your e-mail settings correctly.

You must have a separate e-mail account. Follow the instructions given by your remote mailbox and internet service provider (ISP).

If you select

Messaging

>

Mailbox

and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select

Start

.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

Open the mailbox

Select

Menu

>

Messaging

and a mailbox.

When you open the mailbox, the device asks if you want to connect to the mailbox.

To connect to your mailbox and retrieve new e-mail headers or messages, select

Yes

.

When you view messages online, you are continuously connected to a remote mailbox using a data connection.

To view previously retrieved e-mail messages offline, select

No

.

To create a new e-mail message, select

Options

>

Create message

>

E-mail

.

When you are online, to end the data connection to the remote mailbox, select

Options

>

Disconnect

Retrieve e-mail messages

Select

Menu

>

Messaging

and a mailbox.

If you are offline, select

Options

>

Connect

to open a connection to the remote mailbox.


1. When you have an open connection to a remote mailbox, select

Options

>

Retrieve e-mail

>

New

to retrieve all new messages,

Selected

to retrieve only selected messages, or

All

to retrieve all messages from the mailbox.

To stop retrieving messages, select

Cancel

.

2. To close the connection and view the e-mail messages offline, select

Options

>

Disconnect

.

3. To open an e-mail message, select the message. If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.


49

Messaging

To view e-mail attachments, open the message, and select the attachment field indicated by . If the attachment has not been retrieved to the device, select

Options

>

Retrieve

.

To retrieve e-mail messages automatically, select

Options

>

E-mail settings

>

Automatic retrieval

.

Setting the device to retrieve e-mail automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

Delete e-mail messages

Select

Menu

>

Messaging

and a mailbox.

To delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select

Options

>

Delete

>

Phone only

.

The device mirrors the e-mail headers in the remote mailbox. Although you delete the message content, the e-mail header stays in your device. If you want to remove the header as well, you must be connected to the server when deleting the message from your device and the remote mailbox. It there is no connection to the server, the header is deleted when you make a connection from your device to the remote mailbox again to update the status.

To delete an e-mail from the device and the remote mailbox, select

Options

>

Delete

>

Phone and server

.

To cancel deleting an e-mail that has been marked to be deleted from the device and server during the next connection ( ), select

Options

>

Restore

.

Disconnect from the mailbox

When you are online, to end the data connection to the remote mailbox, select

Options

>

Disconnect

.

Mail for Exchange

With Mail for Exchange, you can receive your work e-mail to your device. You can read and reply to your e-mails, view and edit compatible attachments, view calendar information, receive and reply to meeting requests, schedule meetings, and view, add, and edit contact information. Mail for Exchange can be set up only if your company has

Microsoft Exchange Server. In addition, your company's IT administrator must have activated Mail for Exchange for your account.

Before starting to set up Mail for Exchange, ensure that you have the following:

• A corporate e-mail ID


Messaging

• Your office network user name

• Your office network password

• Your network domain name (contact your company's IT department)

• Your Mail for Exchange server name (contact your company's IT department)

Depending on your company's Mail for Exchange server configuration, you may need to enter other information in addition to those listed. If you do not know the correct information, contact your company's IT department.

With Mail for Exchange, the use of the lock code may be mandatory. The default lock code of your device is 12345, but your company's IT administrator may have set a different one for you to use.

You can access and modify the Mail for Exchange profile and settings in the Messaging settings.

View messages on a SIM card

Select

Menu

>

Messaging

and

Options

>

SIM messages

.

Before you can view SIM messages, you must copy them to a folder in your device.

1. Select

Options

>

Mark/Unmark

>

Mark

or

Mark all

to mark messages.

2. Select

Options

>

Copy

. A list of folders opens.

3. To start copying, select a folder. To view the messages, open the folder.

Cell broadcast messages

Select

Menu

>

Messaging

and

Options

>

Cell broadcast

.

Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. This service may not be available for all regions.

Service commands

Select

Menu

>

Messaging

and

Options

>

Service commands

.

With service commands (network service) you can enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider. This service may not be available for all regions.


51

Messaging

Messaging settings

The settings may be preconfigured in your device, or you may receive them in a message.

To enter settings manually, fill in all fields marked with

Must be defined

or an asterisk.

Some or all message centres or access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them.

Text message settings

Select

Menu

>

Messaging

and

Options

>

Settings

>

Text message

.


•

Message centres

— View a list of all text message centres that have been defined.

•

Message centre in use

— Select which message centre to use to deliver text messages.

•

Character encoding

— To use character conversion to another encoding system when available, select

Reduced support

.

•

Receive report

— Select whether the network sends delivery reports on your messages (network service).

•

Message validity

— Select how long the message centre resends your message if the first attempt fails (network service). If the message cannot be sent within the validity period, the message is deleted from the message centre.

•

Message sent as

— To learn if your message centre is able to convert text messages into these other formats, contact your service provider.

•

Preferred connection

— Select the connection to use.

•

Reply via same centre

— Select whether you want the reply message to be sent using the same text message centre number (network service).

Multimedia message settings

Select

Menu

>

Messaging

and

Options

>

Settings

>

Multimedia message

.


•

Image size

— Define the size of the image in a multimedia message.

•

MMS creation mode

— If you select

Guided

, the device informs you if you try to send a message that may not be supported by the recipient. If you select

Restricted

, the device prevents you from sending messages that may not be supported. To include content in your messages without notifications, select

Free

.

•

Access point in use

— Select which access point is used as the preferred connection.

•

Multimedia retrieval

— Select how you want to receive messages. To receive messages automatically in your home network, select

Auto in home netw.

. Outside your home network, you receive a notification that there is a message to retrieve in the multimedia message centre. If you select

Always automatic

, your device


Messaging

automatically makes an active packet data connection to retrieve the message both in and outside your home network.

•

Allow anonymous msgs.

— Select whether you want to reject messages from an anonymous sender.

•

Receive adverts

— Select whether you want to receive multimedia message advertisements (network service).

•

Receive reports

— Select whether you want the status of the sent message to be shown in the log (network service).

•

Deny report sending

— Select whether you want to prevent your device from sending delivery reports of received messages.

•

Message validity

— Select for how long the message centre resends your message if the first attempt fails (network service). If the message cannot be sent within this time period, the message is deleted from the message centre.

E-mail settings

Manage mailboxes

Select

Menu

>

Messaging

and

Options

>

Settings

>

E-mail

.

To select which mailbox you want to use to send and receive e-mail, select

Mailbox in use

and a mailbox.

To remove a mailbox and its messages from your device, select

Mailboxes

, tap the mailbox to be removed if it is not already highlighted, and select

Options

>

Delete

.

To create a new mailbox, select

Mailboxes

>

Options

>

New mailbox

. The name you give to the new mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

Select

Mailboxes

and a mailbox to change the connection settings, user settings, retrieval settings, and automatic retrieval settings.


53

8. Personalise your device

You can personalise your device by changing the home screen, tones, or themes.

Change the look of your device

Select

Menu

>

Settings

and

Personal

>

Themes

.

You can use themes to change the look of the display, such as wallpaper and main menu layout.

To change the theme that is used for all the applications in your device, select

General

. To preview a theme before activating it, scroll to the theme, and wait for a few seconds. To activate the theme, select

Options

>

Set

. The active theme is indicated by .

To change the layout of the main menu, select

Menu

.

To change the look of the home screen, select


'qtn_apps_idle_skin_hs.pslnactiveidleplugin', locale='en'}

.

To have a wallpaper image or a slide show of changing images as the background in the home screen, select

Wallpaper

>

Image

or

Slide show

.

To change the image displayed in the home screen when a call is received, select

Call image

.

Profiles

Select

Menu

>

Settings

and

Personal

>

Profiles

.

You can use profiles to set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups. The name of the selected profile is displayed at the top of the home screen. If the General profile is in use, only the date is displayed.

To change a profile, scroll to the profile, and select

Options

>

Activate

.

To personalise a profile, scroll to the profile, and select

Options

>

Personalise

. Select the setting you want to change.

To set the profile to be active until a certain time within the next 24 hours, scroll to the profile, select

Options

>

Timed

, and set the time. When the time expires, the profile changes back to the previously active non-timed profile. When the profile is timed,

is displayed in the home screen. The Offline profile cannot be timed.

To create a new profile, select

Options

>

Create new

.


9. Music folder

Music player

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Music player supports file formats such as AAC, AAC+, eAAC+, MP3, and WMA. Music player does not necessarily support all features of a file format or all the variations of file formats.

You can also use Music player to listen to podcasts. Podcasting is a method for delivering audio or video content over the internet using either RSS or Atom technologies for playback on mobile devices and computers.

You can transfer music from other compatible devices to your device.

Play a song or a podcast

To open Music player, select

Menu

>

Music

>

Music player

.

You may have to refresh the music and podcast libraries after you have updated the song or podcast selection in your device. To add all available items to the library, select

Options

>

Refresh library

.

To play a song or a podcast:

1. Select categories to navigate to the song or podcasts you want to hear.

2. To play an item, select the item from the list.

To pause playback, tap ; to resume, tap .


55

Music folder

To fast-forward or rewind, tap and hold or .

To go to the next item, tap . To return to the beginning of the item, tap . To skip to the previous item, tap again within 2 seconds after a song or podcast has started.

To turn random play ( ) on or off, select

Options

>

Shuffle play

.

To repeat the current item ( ), all items ( ), or to turn repeat off, select

Options

>

Repeat

.

If you play podcasts, shuffle and repeat are automatically turned off.

To adjust the volume, press the volume key.

To modify the tone of the music playback, select

Options

>

Equaliser

.

To modify the balance and stereo image or to enhance the bass, select

Options

>

Settings

.

To return to the home screen and leave the player playing in the background, press the end key.

To close the player, select

Options

>

Exit

.

Playlists

Select

Menu

>

Music

>

Music player

and

Playlists

.

To view details of the playlist, select

Options

>

Playlist details

.

Create a playlist

1. Select

Options

>

New playlist

.

2. Enter a name for the playlist, and select

OK

.

3. To add songs now, select

Yes

; or to add the songs later, select

No

.

4. If you select

Yes

, select artists to find the songs you want to add to the playlist. Select

Add

to add items.

To show the song list under an artist title, select

Expand

. To hide the song list, select

Collapse

.

5. When you have made your selections, select

Done

.

If a compatible memory card is inserted, the playlist is saved to the memory card.

To add more songs later, when viewing the playlist, select

Options

>

Add songs

.


Music folder

To add songs, albums, artists, genres, and composers to a playlist from the different views of the music menu, select an item and

Options

>

Add to playlist

>

Saved playlist

or

New playlist

.

To remove a song from a playlist, select

Options

>

Remove

. This does not delete the song from the device; it only removes it from the playlist.

To reorder songs in a playlist, select the song you want to move, and

Options

>

Reorder playlist

. To grab a song and drop it to a new position, select the song in the desired position and

Drop

. To finish reordering the playlist, select

Done

.

Podcasts

Select

Menu

>

Music

>

Music player

and

Podcasts

.

The podcast menu displays the podcasts available in the device.

Podcast episodes have three states: never played, partially played, and completely played. If an episode is partially played, it plays from the last playback position the next time it is played. If an episode has never been played or completely played, it plays from the beginning.

Transfer music from a computer

You can use the following methods to transfer music:

• To view your device on a computer as a mass memory device where you can transfer any data files, make the connection with a compatible USB data cable or Bluetooth connectivity. If you are using a USB data cable, select

Mass storage

as the connection mode. A compatible memory card must be inserted in the device.

• To synchronise music with Windows Media Player, connect a compatible USB data cable, and select

Media transfer

as the connection mode. A compatible memory card must be inserted in the device.

• To install Nokia Music to manage and organise your music files, download the PC software from www.music.nokia.com/download, and follow the instructions.

To change the default USB connection mode, select

Menu

>

Settings

and

Connectivity

>

USB

>

USB connection mode

.

Nokia Music

With the Nokia Music PC software, you can transfer music to your device from your computer, and manage and organise your music files.

To manage your music in Nokia Music, do the following:

1. Open the Nokia Music software on your PC, and register or sign in to Nokia Music

Store.

2. Connect your device to your PC with a compatible USB data cable.


57

Music folder

3. To select the connection mode on your device, select

Media transfer

.

Nokia Music Store

Select

Menu

>

Music

>

Music store

.

In the Nokia Music Store (network service) you can search, browse, and purchase music to download to your device. To purchase music, you first need to register for the service.

To access the Nokia Music Store, you must have a valid internet access point in the device.

Nokia Music Store is not available for all countries or regions.

Nokia Music Store settings

The availability and appearance of the Nokia Music Store settings may vary. The settings may also be predefined and not editable. You may be asked to select the access point to use when connecting to the Nokia Music Store. Select

Default access point

.

In the Nokia Music Store, you may be able to edit the settings by selecting

Options

>

Settings

.

Nokia Podcasting

With the Nokia Podcasting application (network service), you can search, discover, subscribe to, and download podcasts over the air, and play, manage, and share audio and video podcasts with your device.

Podcasting settings

To open Nokia Podcasting, select

Menu

>

Music

>

Podcasting

.

Before using Nokia Podcasting, define your connection and download settings.

The recommended connection method is WLAN. Check with your service provider for terms and data service fees before using different connection methods. For example, a flat rate data plan can allow large data transfers for one monthly fee.

Connection settings

To edit the connection settings, select

Options

>

Settings

>

Connection


•

Default access point

— Select the access point to define your connection to the internet.

•

Search service URL

— Define the podcast search service URL to be used in searches.

Download settings

To edit the download settings, select

Options

>

Settings

>

Download



Music folder

•

Save to

— Define the location where you want to save your podcasts.

•

Update interval

— Define how often podcasts are updated.

•

Next update date

— Define the date of the next automatic update.

•

Next update time

— Define the time of the next automatic update.

Automatic updates only occur if a specific default access point is selected and Nokia

Podcasting is running. If Nokia Podcasting is not running, the automatic updates are not activated.

•

Download limit (%)

— Define the percentage of memory that is reserved for podcast downloads.

•

If limit exceeds

— Define what to do if the downloads exceed the download limit.

Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges.

To restore the default settings, select

Options

>

Restore default

in the settings view.

Downloads

After you have subscribed to a podcast, from directories, search, or by entering a web address, you can manage, download, and play episodes in Podcasts.

To see the podcasts you have subscribed to, select

Podcasting

>

Podcasts

.

To see individual episode titles (an episode is a particular media file of a podcast), select the podcast title.

To start a download, select the episode title. To download or to continue to download selected or marked episodes, select

Options

>

Download

. You can download multiple episodes at the same time.

To play a portion of a podcast during download or after partial downloading, select the podcast and

Options

>

Play preview

.

Fully downloaded podcasts can be found in the Podcasts folder, but are not shown until the library is refreshed.

Radio

Listen to the radio

Select

Menu

>

Music

>

Radio

.

The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or accessory needs to be attached to the device for the FM radio to function properly.

When you open the application for the first time, you can choose to have the local stations tuned automatically.


59

Music folder

To listen to the next or the previous station, select or .

To mute the radio, select .

Select

Options


•

Stations

— View saved radio stations.

•

Tune stations

— Search for radio stations.

•

Save

— Save the radio station.

•

Activate loudspeaker

or

Deactivate loudspeaker

— Turn the loudspeaker on or off.

•

Alternative frequencies

— Select whether you want the radio to automatically search for a better RDS frequency for the station if the frequency level becomes low.

•

Play in background

— Return to the home screen with the radio playing in the background.

Manage radio stations

Select

Menu

>

Music

>

Radio

.

To listen to saved stations, select

Options

>

Stations

, and select a station from the list.

To remove or rename a station, select

Options

>

Stations

>

Options

>

Delete

or

Rename

.

To set the desired frequency manually, select

Options

>

Tune stations

>

Options

>

Manual tuning

.


10. Nokia Video Centre

With Nokia Video Centre (network service), you can download and stream video clips over the air from compatible internet video services using a packet data or WLAN connection. You can also transfer video clips from a compatible PC to your device and view them in Video centre.

Using packet data access points to download videos may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

Your device may have predefined services.

Service providers may provide free content or charge a fee. Check the pricing in the service or from the service provider.

View and download video clips

Connect to video services

1. Select

Menu

>

Applications

>

Video centre

.

2. To connect to a service to install video services, select

Add new services

and the desired video service from the service catalogue.

View a video clip

To browse the content of installed video services, select

Video feeds

.

The content of some video services is divided into categories. To browse video clips, select a category. To search for a video clip in the service, select

Video search

. Search may not be available in all services.

To view information about the selected video clip, select

Options

>

Video details

.

Some video clips can be streamed over the air, but others must be first downloaded to your device. To download a video clip, select

Options

>

Download

. Downloads continue in the background if you exit the application. The downloaded video clips are saved in My videos. To stream a video clip or view a downloaded one, select

Options

>

Play

. When the video clip is playing, to use the control keys for controlling the player, tap the screen. To adjust the volume, use the volume key.

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.

Schedule downloads

Setting the application to download video clips automatically may involve the transmission of large amounts of data through your service provider's network. For information about data transmission charges, contact your service provider. To


61

Nokia Video Centre

schedule an automatic download for video clips in a service, select a category and

Options

>

Schedule downloads

. Video centre automatically downloads new video clips daily at the time you define.

To cancel scheduled downloads for a category, select

Manual download

as the download method.

Video feeds

Select

Menu

>

Applications

>

Video centre

.

The content of the installed video services is distributed using RSS feeds. To view and manage your feeds, select

Video feeds

.

Select

Options


•

Feed subscriptions

— Check your current feed subscriptions.

•

Feed details

— View information about a video.

•

Add feed

— Subscribe to new feeds. Select

Via Video directory

to select a feed from the services in the video directory.

•

Refresh feeds

— Refresh the content of all feeds.

•

Manage account

— Manage your account options for a particular feed, if available.

•

Move

— Move video clips to a desired location.

To view the videos available in a feed, select a feed from the list.

My videos

My videos is a storage place for all video clips in the Video centre application. You can list downloaded video clips and video clips recorded with the device camera in separate views.

1. To open a folder and view video clips, select the folder. When a video clip is playing, to use the control keys for controlling the player, tap the screen.

2. To adjust the volume, press the volume key.

Select

Options


•

Resume download

— Resume a paused or failed download.

•

Cancel download

— Cancel a download.

•

Video details

— View information about a video clip.

•

Find

— Find a video clip. Enter a search term that matches the file name.

•

Memory status

— View the amount of free and used memory.

•

Sort by

— Sort video clips. Select the desired category.

•

Move and copy

— Move or copy video clips. Select

Copy

or

Move

and the desired location.


Nokia Video Centre

Transfer videos from your PC

Transfer your own video clips to Video centre from compatible devices using a compatible USB data cable. Video centre will display only the video clips which are in a format supported by your device.

1. To view your device on a PC as a mass memory device where you can transfer any data files, make the connection with a USB data cable.

2. Select

Mass storage

as the connection mode. A compatible memory card needs to be inserted in the device.

3. Select the video clips you want to copy from your PC.

4. Transfer the video clips to E:\My Videos in the memory card.

The transferred video clips appear in the My videos folder in Video centre. Video files in other folders of your device are not displayed.

Video centre settings

In the Video centre main view, select

Options

>

Settings


•

Video service selection

— Select the video services that you want to appear in

Video centre. You can also add, remove, edit, and view the details of a video service.

You cannot edit preinstalled video services.

•

Connection settings

— To define the network destination used for the network connection, select

Network connection

. To select the connection manually each time Video centre opens a network connection, select

Always ask

.

To set GPRS connection on or off, select

Confirm GPRS usage

.

To set roaming on or off, select

Confirm roaming

.

•

Parental control

— Set an age limit to videos. The required password is the same as the device lock code. The factory setting for the lock code is 12345. In video-ondemand services, videos which have the same or a higher age limit than you have set, are hidden.

•

Preferred memory

— Select whether downloaded videos are saved in the device memory or on a compatible memory card.

•

Thumbnails

— Select whether to download and view thumbnail images in video feeds.


63

11. Camera

Your device supports an image capture resolution of 2048x1536 pixels. The image resolution in this guide may appear different.

Activate the camera

To activate the camera, press the capture key.

Image capture

On-screen controls and indicators for still image capture

The still image viewfinder displays the following:

1 — Capture mode indicator

2 — Zoom slider. To turn the zoom slider on and off, tap the screen.

3 — Capture icon. Tap to capture an image.

4 — Flash mode. Tap to change settings.

5 — Capture settings. Tap to change settings.

6 — Battery charge level indicator

7 — Image resolution indicator

8 — Image counter (the estimated number of images you can capture using the current image quality setting and available memory)

9 — Memory in use. Depending on the setup of your device, there are the following options: device memory ( ), or memory card ( ).

10 — GPS signal indicator


Camera

Capture and recording settings

To open the capture and recording settings view before capturing an image or recording a video clip, select

Menu

>

Applications

>

Camera

and .

The capture and recording settings view provides you with shortcuts to different items and settings before capturing an image or recording a video clip.

The capture and recording settings return to the default settings after you close the camera.


— Select the scene.

or — Switch between video and image mode.

or — Show or hide the viewfinder grid (images only).

— Activate the self-timer (images only).

— Open Gallery.

Image settings:

— Select a colour effect.

— Adjust the white balance. Select the current lighting conditions. This allows the camera to reproduce colours more accurately.

— Adjust the exposure compensation (images only). If you are shooting a dark subject against a very light background, such as snow, adjust the exposure to +1 or +2 to compensate for the background brightness. For light subjects against a dark background, use -1 or -2.

Adjust light sensitivity (images only). Increase the light sensitivity in low light conditions to avoid too dark images and blurry images. Increasing the light sensitivity may also increase the image noise.

Adjust contrast (images only). Adjust the difference between the lightest and darkest parts of the image.

Adjust sharpness (images only).

The screen display changes to match the settings you define.

The capture settings are shooting-mode specific. Switching between the modes does not reset the defined settings.

If you select a new scene, the capture settings are replaced by the selected scene. You can change the capture settings after selecting a scene if needed.

Saving the captured image may take longer if you change the zoom, lighting, or colour settings.


65

Camera

Capture images

When capturing an image, note the following:

• Use both hands to keep the camera still.

• The quality of a digitally zoomed image is lower than that of a non-zoomed image.

• The camera goes into battery saving mode if there are no actions for about a minute.

To continue capturing images, slide the lock switch on the side of the device.

To capture an image:

1. To switch from video mode to image mode, if necessary, select > .

2. To lock the focus on an object, press the capture key halfway down (not available in landscape or sport scene modes). A green locked focus indicator is displayed. If the focus was not locked, a yellow focus indicator is displayed. Release the capture key, and press it halfway down again. You can also capture an image without locking the focus.

3. To capture an image, press the capture key. Do not move the device before the image is saved and the final image displayed.

To zoom in or out when capturing an image, use the zoom key in your device.

To leave the camera open in the background and use other applications, press the menu key. To return to the camera, press and hold the capture key.

After capturing an image

After you capture an image, select from the following options (available only if you have selected

Options

>

Settings

>

Show captured image

>

Yes

):

•

•

•

— Send the image in a multimedia or e-mail message, or through connection methods such as Bluetooth connectivity.

— Upload the image to a compatible online album.

Delete

— Delete the image.

To use the image as wallpaper in the home screen, select

Options

>

Use image

>

Set as wallpaper

.

To set the image as a default call image to be used for every call situation, select

Options

>

Use image

>

Set as call image

.

To assign the image to a contact,

Options

>

Use image

>

Assign to contact

.

To return to the viewfinder to capture a new image, press the capture key.

Flash and video light

Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.


Camera

The camera of your device has an LED flash for low light conditions.

To select the desired flash mode, tap the current flash mode indicator, which is one of the following:

Automatic

,

Reduce red

,

On

, and

Off

.

Avoid touching the flash LEDs when the back cover has been removed. The LEDs may get hot after prolonged usage.

Video light

To increase light levels when recording video in low light, select .

Scenes

A scene helps you to find the right colour and lighting settings for the current environment. The settings of each scene have been set according to a certain style or environment.

The default scene in image mode is

Automatic

, and in video mode

Automatic

(both indicated with ).

To change the scene, select >

Scene modes

and a scene.

To make your own scene suitable for a certain environment, scroll to

User defined

, and select

Change

. In the user defined scene you can adjust different lighting and colour settings. To copy the settings of another scene, select

Based on scene mode

and the desired scene. To save the changes and return to the scenes list, select

Back

. To activate your own scene, select

User defined

>

Select

.

Location information

Your device does not have an internal GPS antenna. To use this feature, use a compatible

GPS receiver (accessory sold separately).

You can automatically add capture location information to the file details of the captured material.

The location coordinate values may not be displayed due to local authorities’ requirements.

Select

Menu

>

Applications

>

Camera

.

To add location information to all captured material, select

Options

>

Settings

>

Show GPS info

>

On

.

It may take several minutes to obtain the coordinates of your location. The availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions. If you share a file that includes location information, also the location information is shared, and your location may be visible to third parties viewing the file. The device requires network services to acquire location information.

Location information indicators:


67

Camera

• — Location information unavailable. GPS stays on in the background for several minutes. If a satellite connection is found and the indicator changes to within that time, all the images captured and video clips recorded during that time are tagged based on the received GPS positioning information.

• — Location information is available. Location information is added to the file details.

You in the image — self-timer

Use the self-timer to delay the capture so that you can include yourself in the image.

To set the self-timer delay, select > , and the delay needed before the image is captured.

To activate the self-timer, select

Activate

. The stopwatch icon on the screen blinks and the remaining time is displayed when the timer is running. The camera captures the image after the selected delay elapses.

To switch off the self-timer, select > > .

Tip: Select

2 seconds

to keep your hand steady when capturing an image.

Capture images in a sequence

Select

Menu

>

Applications

>

Camera

.

To start capturing images in a quick sequence, select

Menu

>

Applications

>

Camera

and >

Sequence

. To close the settings window, tap the screen above the window. Press and hold the capture key. The device captures images until you release the key or until the memory runs out. If you press the capture key briefly, the device captures 18 images in a sequence.

The captured images are displayed in a grid. To view an image, select the image. To return to the sequence mode viewfinder, press the capture key.

You can also use sequence mode with the self-timer.

To deactivate sequence mode, select >

Single shot

.

Video recording

Record videos

1. To switch from image mode to video mode, if necessary, select and the video mode .


Camera

2. To start recording, press the capture key or tap . A red record icon is displayed, and a tone sounds.

3. To pause recording at any time, select

Pause

. To resume, select

Continue

. If you pause recording and do not press any key within one minute, the recording stops.

To zoom in or out of the subject, use the zoom key in your device.

4. To stop recording, press the capture key. The video clip is automatically saved in

Gallery. The maximum length of a video clip is approximately 30 seconds with sharing quality and 90 minutes with other quality settings.

Video recording on-screen controls and indicators

The video viewfinder displays the following:

1 — Capture mode indicator

2 — Audio mute on indicator

3 — Capture icon. Tap to record video.

4 — Video light on/off.

5 — Recording settings. Tap to change settings.

6 — Battery charge level indicator

7 — Video quality indicator. To change this setting, select

Options

>

Settings

>

Video quality

.

8 — Video clip file type

9 — Available recording time. When you are recording, the current video length indicator also shows the elapsed and remaining time.

10 — The location to which the video clip is saved.

•

•

After recording a video clip

After you record a video clip, select from the following options (available only if you have selected

Options

>

Settings

>

Show last captured video

>

Yes

):

Play

— Play the video clip you just recorded.

Delete

— Delete the video clip.


69

Camera

•

Send

or press the call key — Send the video clip in a multimedia or e-mail message, or through connection methods such as Bluetooth connectivity. You may not be able to send video clips saved in the MPEG4 file format in a multimedia message.

To return to the viewfinder to record a new video clip, press the capture key.


12. Gallery

To store and organise your images, video clips, sound clips, and streaming links, select

Menu

>

Gallery

.

Tip: To access the images and video clips view quickly, tap the media key ( ) to open the media bar, and select .

View and organise files

Select

Menu

>

Gallery


•

•

•

•

Images & videos

— View images in the image viewer and videos in Video centre.

Songs

— Open Music player.

Sound clips

— Listen to sound clips.

Other media

— View presentations.

You can browse, open, and create folders; and mark, copy, move, and add items to folders.

Files stored on your compatible memory card (if inserted) are indicated with .

To open a file, select a file from the list. Video clips and files with the .ram file extension open and play in Video centre, and music and sound clips in Music player.

To copy or move files to the memory card (if inserted) or device memory, select a file,

Options

>

Organise

>

Copy

or

Move

, and from the available options.

View images and videos

Select

Menu

>

Gallery

and

Images & videos

.

The images, video clips, and folders are displayed in a loop and ordered by date and time. To browse the files one by one, swipe left or right. To browse files in groups, swipe up or down.

To open a file, select a file from the list. To zoom in an image, use the volume key in your device.

Select

Options


•

Edit

— Edit a video clip or an image.

•

Use file

— To use the image as wallpaper in the home screen, select

Set as wallpaper

.

To set the image as a generic call image, select

Set as call image

.

To set the image as a call image for a contact, select


.


71

Gallery

•

•

•

To set the video clip as a ringing tone, select

As ringing tone

.

To assign the video clip as a ringing tone for a contact, select


.

The toolbar helps you select frequently used functions with images, video clips, and folders.

From the toolbar, select from the following:

Send

— Send the selected image or video clip.

Edit

— Edit the selected image or video clip.

Delete

— Delete the selected image or video clip.

Organise images and videos

Select

Menu

>

Gallery

and

Images & videos

>

Options


•

Folder options

— To move files to folders, select

Move to folder

. To create a new folder, select

New folder

.

•

Organise

— To copy files to folders, select

Copy

. To move files to folders, select

Move

.

•

View by

— View files by date, title, or size.


13. Share online

About Share online

Select

Menu

>

Internet

>

Share online

.

With Share online (network service), you can post your images, video clips, and sound clips from your device to compatible online sharing services, such as albums and blogs.

You can also view and send comments to the posts in these services, and download content to your compatible Nokia device.

The supported content types and the availability of the Share online service may vary.

Subscribe to services

Select

Menu

>

Internet

>

Share online

.

To subscribe to an online sharing service, go to the service provider's website, and check that your Nokia device is compatible with the service. Create an account as instructed on the website. You receive a user name and password needed to set up your device with the account.

1. To activate a service, open the Share online application in your device, select a service and

Options

>

Activate

.

2. Allow the device to create a network connection. If you are prompted for an internet access point, select one from the list.

3. Sign in to your account as instructed on the service provider’s website.

For the availability and cost of the third party services and data transfer costs, contact your service provider or the relevant third party.

Manage your accounts

To view your accounts, select

Options

>

Settings

>

My accounts

.

To create a new account, select

Options

>

Add new account

.

To change your user name or password for an account, select the account and

Options

>

Open

.

To set the account as the default when sending posts from your device, select

Options

>

Set as default

.

To remove an account, select the account and

Options

>

Delete

.


73

Share online

Create a post

Select

Menu

>

Internet

>

Share online

.

To post multimedia files to a service, select a service and

Options

>

New post

. If the online sharing service provides channels for posting files, select the desired channel.

To add an image, video clip, or sound clip to the post, select

Options

>

Insert

.

To add a title or description to the post, enter text directly to the fields, if available.

To add tags to the post, select

Tags:

.

To select whether to enable the posting of location information contained in the file, select

Location:

.

To set the level of privacy for a file, select

Privacy:

. To allow everyone to view your file, select

Public

. To restrict others from seeing your files, select

Private

. You can define the

Default

setting on the service provider's website.

To send the post to the service, select

Options

>

Upload

.

Post files from Gallery

You can post files from Gallery to an online sharing service.

1. Select

Menu

>

Gallery

and the files you want to post.

2. Select

Options

>

Send

>


'qtn_pub_aiw_provider_menu_upload.pubaiwprovider', locale='en'}

and the desired account.

3. Edit your post as required.

4. Select

Options

>

Post to web

.


14. Web browser

With the web browser, you can view hypertext markup language (HTML) pages on the web as originally designed (network service). You can also browse web pages that are designed specifically for mobile devices, and use extensible hypertext markup language

(XHTML), or the wireless markup language (WML).

To browse the web, you need to have an internet access point defined in your device.

Tip: To open the browser, select the media key ( ) to open the media bar, and select .

Browse the web

Select

Menu

>

Internet

>

Web

.

Important: Use only services that you trust and that offer adequate security and protection against harmful software.

Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java

Verified™ testing.

To browse a web page, in the bookmarks view, select a bookmark, or enter the address in the field ( ), and select

Go to

.

Some web pages may contain material, such as graphics and sounds, that requires a large amount of memory to view. If your device runs out of memory while loading such a web page, the graphics on the page are not shown.

To browse web pages without graphics to save memory, select

Options

>

Settings

>

Page

>

Load content

>

Text only

.

To enter a new web address you want to visit, select

Options

>

Go to

>

New web page

.

To refresh the content of the web page, select

Options

>

Web page options

>

Reload

.

To save the current web page as a bookmark, select

Options

>


>

Save as bookmark

.

To view snapshots of the web pages you have visited during the current browsing session, select

Back

(available if

History list

is set on in the browser settings and the current web page is not the first web page you visit). Select the web page you want.


75

Web browser

To open a sublist of commands or actions for the current web page, select

Options

>

Service options

(if supported by the web page).

To prevent or allow the automatic opening of multiple windows, select

Options

>


>

Block pop-ups

or

Allow pop-ups

.

Tip: To take the browser to the background, press the end key once. To end the connection, press and hold the end key.

•

•

•

Browser toolbar

The browser toolbar helps you select frequently used functions of the browser.


Expand toolbar

— Expand the toolbar to access more toolbar functions.

Go to web address

— Enter a new web address.

Show zoom

— Zoom in or out on the web page.

•

•

•

•

•

•

•

•

•

•

To use the expanded toolbar, select

Expand toolbar


Go to feeds

Full screen

Subsc. feeds

— View your current feed subscriptions.

— Switch to the full screen view.

— View a list of available web feeds on the current web page, and subscribe to a web feed.

Settings

— Edit the settings.

Save bkmrk.

— Save the current web page as a bookmark.

Reload

— Refresh the web page.

Overview

— View an overview of the current web page.

Homepage

— Go to the homepage (if defined in the settings).

Bookmarks

— Open the bookmarks view.

Find keywd.

— Search on the current web page.

Navigate pages

When you are browsing a web page that contains a large amount of information, you can use Page overview to view what kind of information the web page contains.

To see an overview of the current web page, open the toolbar, and select > .


Web browser

Web feeds and blogs

Web feeds are XML files on web pages that are used to share, for example, the latest news headlines or blogs. Blogs or weblogs are web diaries. It is common to find web feeds on web, blog, and wiki pages.

The web browser application automatically detects if a web page contains web feeds.

To subscribe to a web feed, select a feed and

Options

>

Subscribe to web feeds

.

To update a web feed, select a feed and

Options

>

Refresh

. You can also update web feeds from the Contacts bar.

To define how web feeds are updated, select

Options

>

Settings

>

Web feeds

.

Widgets

Your device supports widgets. Widgets are small, downloadable web applications that deliver multimedia, news feeds, and other information, such as weather reports, to your device. Installed widgets appear as separate applications in the Applications folder.

You can download widgets using the Download! application or from the web.

You can also install widgets on a compatible memory card (if available).

The default access point for widgets is the same as in the web browser. When active in the background, some widgets may update information automatically to your device.

Using widgets may involve the transmission of large amounts of data through your service provider's network. For information about data transmission charges, contact your service provider.

Content search

Select

Menu

>

Internet

>

Web

.

To search for text, phone numbers, or e-mail addresses within the current web page, select

Options

>

Find keyword

and the appropriate option.

To go to the previous match, select

Options

>

Find previous

.

To go to the next match, select

Options

>

Find next

.

Tip: To search for text within the current web page, open the toolbar, and select

>

.


77

Web browser

Download and purchase items

You can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free of charge, or you can purchase them.

Downloaded items are handled by the respective applications in your device, for example, a downloaded photo can be saved in Gallery.


Verified testing.

To download an item:

1. Select the link.

2. Select the appropriate option to purchase the item (for example, Buy).

3. Carefully read all the information provided.

4. To continue or cancel the download, select the appropriate option (for example,

Accept or Cancel).

When you start a download, a list of ongoing and completed downloads from the current browsing session is displayed.

To modify the list, select

Options

>

Downloads

. In the list, select an item and

Options

to cancel ongoing downloads, or open, save, or delete completed downloads.

Bookmarks

The bookmarks view opens when you open the Web application. You can select web addresses from a list or from a collection of bookmarks in the

Recently visited pages

folder.

The toolbar helps you select frequently used functions of the browser.

On the toolbar, select from the following:

•

•

•

Add bookmark

— Add a new bookmark.

Go to web address

— Enter a new web address.

Delete

— Delete a bookmark.

Select

Options


•

Go to

— Enter a new web address, go to the previous web page, or view saved links to web feeds and blogs.

•

Bookmark options

— Send and add bookmarks, and set bookmarks as a homepage.

•

Bookmark manager

— Edit, move, and delete bookmarks.

Web also keeps track of the web pages you visit during browsing. In the

Recently visited pages

folder, you can view the list of the visited web pages.


Web browser

Empty the cache

The information or services you have accessed are stored in the cache memory of the device.

A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use.

To empty the cache, select

Options

>

Clear privacy data

>

Cache

.

Connection security

If the security indicator ( ) is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or the place where the requested resource is stored) is secure.

The service provider secures the data transmission between the gateway and the content server.

Security certificates may be required for some services, such as banking services. You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device. For more information, contact your service provider.

Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown, even if the certificate should be valid, check that the current date and time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.


79

15. Positioning

Positioning with your device

You can use applications such as GPS data to find out your location, or measure distances and coordinates. These applications require a GPS connection.

Your device does not have an internal GPS antenna. To use applications that require a

GPS connection, use a compatible GPS receiver (accessory sold separately). Use Bluetooth connectivity to connect to the GPS receiver.

You can also use network-based positioning with your device.

Network positioning

You can use the mobile network to find out your current location, even indoors. This is faster but less accurate than with GPS, and you cannot use the location as a starting point for navigation.

To use the mobile network for positioning, in the device settings, select the networkbased positioning method.

About GPS

To use GPS, you need a compatible GPS receiver. Use Bluetooth connectivity to connect to the GPS receiver. To start using a compatible GPS receiver with Bluetooth connectivity, select the Bluetooth application.

The coordinates in the GPS are expressed in the degrees and decimal degrees format using the international WGS-84 coordinate system. The availability of the coordinates may vary by region.

The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil

GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow reception of GPS signals.


Positioning

Any GPS should not be used for precise location measurement, and you should never rely solely on location data from the GPS receiver and cellular radio networks for positioning or navigation.

The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals.

Different positioning methods can be enabled or disabled in positioning settings.

Check the satellite signal status

Your device does not have an internal GPS antenna. To use applications that require a

GPS connection, use a compatible GPS receiver (accessory sold separately).

To check how many satellites the GPS receiver has found, and whether it is receiving satellite signals, select

Menu

>

Applications

>

Location

and

GPS data

>

Position

>

Options

>

Satellite status

.

If the GPS receiver has found satellites, a bar for each satellite is displayed in the satellite information view. The longer the bar, the stronger the satellite signal. When the GPS receiver has received enough data from the satellite signal to calculate your location, the bar turns blue.

To view the positions of found satellites, select

Chg. view

.

Initially, the GPS receiver must receive signals from at least four satellites to be able to calculate your location. When the initial calculation has been made, it may be possible to continue calculating your location with three satellites. However, the accuracy is generally better when more satellites are found.

If no satellite signal can be found, consider the following:

• If you are indoors, go outdoors to receive a better signal.

• If you are outdoors, move to a more open space.

• If the weather conditions are bad, the signal strength may be affected.

• Some vehicles have tinted (athermic) windows, which may block the satellite signals.

Position requests

You may receive a request from a network service to receive your position information.

Service providers may offer information about local topics, such as weather or traffic conditions, based on the location of your device.

When you receive a position request, the service that is making the request is displayed.

Select

Accept

to allow your position information to be sent or

Reject

to deny the request.


81

Positioning

Landmarks

Select

Menu

>

Applications

>

Location

and

Landmarks

.

With Landmarks, you can save the position information of specific locations in your device. You can sort the saved locations into different categories, such as business, and add other information to them, such as addresses. You can use your saved landmarks in compatible applications, such as GPS data.

GPS coordinates are expressed in the degrees and decimal degrees format using the international WGS-84 coordinate system.

Select

Options


•

New landmark

— Create a new landmark. To make a positioning request for your current location, select

Current position

. To enter the position information manually, select

Enter manually

.

•

Edit

— Edit or add information to a saved landmark (for example, a street address).

•

Add to category

— Add a landmark to a category in Landmarks. Select each category to which you want to add the landmark.

•

Send

— Send one or several landmarks to a compatible device. Your received landmarks are placed in the Inbox folder in Messaging.

You can sort your landmarks into preset categories, and create new categories. To edit and create new landmark categories, open the categories tab, and select

Options

>

Edit categories

.

GPS data

GPS data is designed to provide route guidance information to a selected destination, position information about your current location, and traveling information, such as the approximate distance to the destination and approximate duration of travel.

Select

Menu

>

Applications

>

Location

and

GPS data

.

Positioning settings

Select

Menu

>

Applications

>

Location

and

Positioning

.

Positioning methods


•

Bluetooth GPS

— Use a compatible external GPS receiver with Bluetooth connectivity.

•

Network based

— Use information from the cellular network (network service).


Positioning

Positioning server

To define an access point and positioning server for network-assisted positioning methods, such as network-based positioning, select

Positioning server

. The positioning server may be preset by your service provider, and you may not be able to edit the settings.

Notation settings

To select which measurement system you want to use for speeds and distances, select

Measurement system

>

Metric

or

Imperial

.

To define in which format the coordinate information is displayed in your device, select

Coordinate format

and the desired format.


83

16. Connectivity

Your device offers several options to connect to the internet or to another compatible device or PC.

Data connections and access points

Your device supports packet data connections (network service), such as GPRS in the

GSM network.

You can also use a WLAN data connection. Only one connection in one wireless LAN can be active at a time, but several applications can use the same internet access point.

To establish a data connection, an access point is required. You can define different kinds of access points, such as the following:

• MMS access point to send and receive multimedia messages

• Internet access point (IAP) to send and receive e-mail and connect to the internet

Check the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your service provider.

Network settings

Select

Menu

>

Settings

and

Connectivity

>

Network

.


•

Operator selection

— Select

Automatic

to set the device to search for and select one of the available networks, or

Manual

to manually select the network from a list.

If the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network.

•

Cell info display

— Set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.

Wireless LAN

Your device can detect and connect to wireless local area networks (WLAN). Using a

WLAN, you can connect your device to the internet and compatible devices that have

WLAN support.


Connectivity

About WLAN

To use a wireless LAN (WLAN) connection, it must be available in the location, and your device must be connected to the WLAN. Some WLANs are protected, and you need an access key from the service provider to connect to them.

Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information.

Features that use WLAN, or that are allowed to run in the background while using other features, increase the demand on battery power and reduce the battery life.

Your device supports the following WLAN features:

• IEEE 802.11b/g and WAPI standards

• Operation at 2.4 GHz

• Wired equivalent privacy (WEP) with keys up to 128 bits, Wi-Fi protected access

(WPA), and 802.1x authentication methods. These functions can be used only if they are supported by the network.

Important: Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorised access to your data.

About WLAN

To use a wireless LAN (WLAN) connection, it must be available in the location, and your device must be connected to the WLAN. Some WLANs are protected, and you need an access key from the service provider to connect to them.

Note: In France, you are only allowed to use WLAN indoors.

Features that use WLAN, or that are allowed to run in the background while using other features, increase the demand on battery power and reduce the battery life.

Your device supports the following WLAN features:

• IEEE 802.11b/g standard

• Operation at 2.4 GHz

• Wired equivalent privacy (WEP) with keys up to 128 bits, Wi-Fi protected access

(WPA), and 802.1x authentication methods. These functions can be used only if they are supported by the network.

Important: Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorised access to your data.


85

Connectivity

WLAN connections

To use a wireless LAN (WLAN) connection, you must create an internet access point (IAP) for WLAN. Use the access point for applications that need to connect to the internet.

A WLAN connection is established when you create a data connection using a WLAN internet access point. The active WLAN connection ends when you end the data connection.

You can use WLAN during a voice call or when packet data is active. You can only be connected to one WLAN access point device at a time, but several applications can use the same internet access point.

When the device is in the offline profile, you can still use WLAN (if available). Remember to comply with any applicable safety requirements when establishing and using a WLAN connection.

Tip: To check the unique media access control (MAC) address that identifies your device, open the dialler and enter *#62209526#.

WLAN wizard

Select

Menu

>

Settings

and

Connectivity

>

Wireless LAN

.

The WLAN wizard helps you to connect to a wireless LAN (WLAN) and manage your WLAN connections.

If the search finds WLANs, to create an internet access point (IAP) for a connection and start the web browser using this IAP, select the connection and

Start web browsing

.

If you select a secured WLAN, you are asked to enter the relevant password. To connect to a hidden network, you must enter the correct network name (service set identifier,

SSID).

If you already have the web browser running using the currently active WLAN connection, to return to the web browser, select

Continue web browsing

. To end the active connection, select the connection and

Disconnect WLAN

.

WLAN internet access points

Select

Menu

>

Settings

and

Connectivity

>

Wireless LAN

>

Options

.


•

Filter WLAN networks

— Filter out wireless LANs (WLANs) from the list of found networks. The selected networks are not displayed the next time the application searches for WLANs.

•

Details

— View the details of a network shown in the list. If you select an active connection, the connection details are displayed.


Connectivity

Operating modes

There are two operating modes in WLAN: infrastructure and ad hoc.

The infrastructure operating mode allows two kinds of communication: wireless devices are connected to each other through a WLAN access point device, or wireless devices are connected to a wired LAN through a WLAN access point device.

In the ad hoc operating mode, devices can send and receive data directly with each other.

Wireless LAN settings

Select

Menu

>

Settings

and

Connectivity

>

Wireless LAN

>

Options

>

Settings

.


•

Show WLAN availability

— Select whether is displayed when a wireless LAN

(WLAN) is available.

Tip: To access the WLAN Wizard application and view the available options, select the WLAN icon, and in the pop-up window, select the highlighted text next to the WLAN icon.

•

Scan for networks

— If you set


to

Yes

, you can select how often the device searches for available WLANs and updates the indicator.

•

Internet connectivity test

— Select whether you want the device to test the internet capability of the selected WLAN automatically, to ask for permission every time, or to never perform the connectivity test. If you select

Run automatically

or allow the test to be performed when the device asks for it, and the connectivity test is performed successfully, the access point is saved to the internet destinations.

To view advanced settings, select

Options

>

Advanced settings

. Changing the advanced settings for the WLAN is not recommended.

Access points

Create a new access point

Select

Menu

>

Settings

and

Connectivity

>

Destinations

.

You may receive access point settings in a message from a service provider. Some or all access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them.

When you open one of the access point groups ( , , , ), you can see the access point types:

indicates a protected access point

indicates a packet data access point


87

Connectivity

indicates a wireless LAN (WLAN) access point

Tip: You can create internet access points in a WLAN with the WLAN wizard.

To create a new access point, select

Access point

. The device asks to check for available connections. After the search, connections that are already available are shown and can be shared by a new access point. If you skip this step, you are asked to select a connection method and to define the settings needed.

To edit the settings of an access point, open one of the access point groups, and select an access point. Follow the instructions from your service provider.

•

Connection name

— Enter a name for the connection.

•

Data bearer

— Select the data connection type.

Depending on the data connection you select, only certain setting fields are available.

Fill in all fields marked with

Must be defined

or with a red *. Other fields can be left empty, unless your service provider has instructed otherwise.

To use a data connection, your service provider must support this feature, and if necessary, activate it for your SIM card.

Create access point groups

Select

Menu

>

Settings

and

Connectivity

>

Destinations

.

Some applications allow you to use access point groups for network connections.

To avoid selecting a single access point every time the device makes a network connection, you can create a group that contains various access points to connect to that network and define the order in which the access points are used.

For example, you can add wireless LAN (WLAN) and packet data access points to an internet access point group, and use the group for browsing the web. If you give WLAN the highest priority, the device connects to the internet through WLAN, if available, and through a packet data connection if not.

To create a new access point group, select

Options

>

Manage

>

New destination

.

To add access points to an access point group, select the group and

Options

>

New access point

. To copy an existing access point from another group, select the group, tap the relevant access point if it is not already highlighted, and select

Options

>

Organise

>

Copy to other dest.

.

To change the priority of an access point within the group, select

Options

>

Organise

>

Change priority

.

Packet data access points

Select

Menu

>

Settings

and

Connectivity

>

Destinations

>

Access point

, and follow the instructions on the screen.


Connectivity

To edit a packet data access point, open one of the access point groups, and select an access point marked with .

Follow the instructions from your service provider.


•

Access point name

— You obtain the access point name from your service provider.

•

User name

— The user name may be needed to make a data connection, and is usually provided by your service provider.

•

Prompt password

— If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select

Yes

.

•

Password

— A password may be needed to make a data connection and is usually provided by your service provider.

•

Authentication

— Select

Secure

to always send your password encrypted or

Normal

to send your password encrypted when possible.

•

Homepage

— Depending on the access point you are setting up, enter the web address or the address of the multimedia message centre.

•

Use access point

— Select

After confirmation

if you want the device to ask for confirmation before the connection using this access point is created, or

Automatically

if you want the device to connect to the destination using this access point automatically.

Select

Options

>



•

Network type

— Select the internet protocol type to transfer data to and from your device. The other settings depend on the selected network type.

•

Phone IP address

(for IPv4 only) — Enter the IP address of your device.

•

DNS addresses

— Enter the IP addresses of the primary and secondary DNS servers, if required by your service provider. To obtain these addresses, contact your internet service provider.

•

Proxy server address

— Enter the address of the proxy server.

•

Proxy port number

— Enter the port number of the proxy server.

WLAN internet access points

Select

Menu

>

Settings

and

Connectivity

>

Destinations

>

Access point

, and follow the instructions on the screen.

To edit a wireless LAN (WLAN) access point, open one of the access point groups and select an access point marked with .

Follow the instructions from your WLAN service provider.

•

WLAN network name

— Select

Enter manually

or

Search for networks

. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device.

•

Network status

— Define whether the network name is displayed.


89

Connectivity

•

WLAN network mode

— Select

Ad-hoc

to create an ad hoc network and to allow devices to send and receive data directly; a WLAN access point device is not needed.

In an ad hoc network, all devices must use the same WLAN network name.

•

WLAN security mode

— Select the encryption used:

WEP

,

802.1x

(not for ad hoc networks),

WPA/WPA2

, or

WAPI

. If you select

Open network

, no encryption is used.

The WEP, 802.1x, WPA, and WAPI functions can be used only if the network supports them.

•

Homepage

— Enter the web address of the starting page.

•

Use access point

— Select

After confirmation

if you want the device to ask for confirmation before the connection using this access point is created or

Automatically

if you want the device to connect to the destination using this access point automatically.

To enter the settings for the selected security mode, select

WLAN security settings

.

Security settings for WEP

•

WEP key in use

— Select the wired equivalent privacy (WEP) key number. You can create up to four WEP keys. The same settings must be entered on the WLAN access point device.

•

Authentication type

— Select

Open

or

Shared

for the authentication type between your device and the WLAN access point device.

•

WEP key settings

— Enter

WEP encryption

(length of the key),

WEP key format

(

ASCII

or

Hexadecimal

), and

WEP key

(the WEP key data in the selected format).

Security settings for 802.1x and WPA/WPA2

•

WPA/WPA2

— Select the means of authentication:

EAP

to use an extensible authentication protocol (EAP) plug-in, or

Pre-shared key

to use a password.

Complete the appropriate settings:

•

EAP plug-in settings

— Enter the settings according to the instructions from your service provider.

•

Pre-shared key

— Enter a password. The same password must be entered on the WLAN access point device.

•

WPA2 only mode

— Only WPA2 enabled devices are allowed to establish a connection in this mode.

Security settings for WAPI

• — Contact your service provider for more information.

Advanced WLAN settings

Select

Options

>



•

IPv4 settings

— Enter the IP address of your device, the subnet IP address, the default gateway, and the IP addresses of the primary and secondary DNS servers.

Contact your internet service provider for these addresses.

•

IPv6 settings

— Define the type of DNS address.

•

Ad-hoc channel

(only for

Ad-hoc

) — To enter a channel number (1-11) manually, select

User defined

.


•

Proxy server address

— Enter the address for the proxy server.

•

Proxy port number

— Enter the proxy port number.

Active data connections

Select

Menu

>

Settings

and

Connectivity

>

Connection mgr.

.

In the active data connections view, you can see the open data connections:

data calls

packet data connections

wireless LAN (WLAN) connections

Connectivity

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.

To end a connection, select

Options

>

Disconnect

.

To end all open connections, select

Options

>

Disconnect all

.

To view the details of a connection, select

Options

>

Details

.

Synchronisation

Select

Menu

>

Settings

and

Connectivity

>

Data transfer

>

Sync

.

The Synchronisation application enables you to synchronise your notes, calendar entries, text and multimedia messages, browser bookmarks, or contacts with various compatible applications on a compatible computer or on the internet.

You may receive synchronisation settings in a special message from your service provider.

A synchronisation profile contains the necessary settings for synchronisation.

When you open the application, the default or previously used synchronisation profile is displayed. To modify the profile, tap a synchronisation item to include it in the profile or to leave it out.

To manage synchronisation profiles, select

Options

and the desired option.

To synchronise data, select

Options

>

Synchronise

. To cancel synchronisation before it finishes, select

Cancel

.


91

Connectivity

Bluetooth connectivity

About Bluetooth connectivity

With Bluetooth connectivity, you can make a wireless connection to other compatible devices, such as mobile phones, computers, headsets, and car kits.

You can use the connection to send images, video clips, music and sound clips, and notes, transfer files from your compatible PC, and print images with a compatible printer.

Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight. However, they must be within 10 metres (33 feet) of each other, although the connection may be subject to interference from obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: advanced audio distribution, basic imaging, device identification, dial-up networking, file transfer, generic access, generic audio/video distribution, generic object exchange, hands-free, headset, object push, phone book access, serial port, and

SIM access. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved accessories for this model. Check with the manufacturers of other devices to determine their compatibility with this device.

Features using Bluetooth technology increase the demand on battery power and reduce the battery life.

When the device is locked, you cannot use Bluetooth connectivity.

Settings

Select

Menu

>

Settings

and

Connectivity

>

Bluetooth

.

When you open the application for the first time, you are asked to define a name for your device. You can change the name later.


•

Bluetooth

— Turn Bluetooth connectivity on or off.

•

My phone's visibility

— To allow your device to be found by other devices with

Bluetooth wireless technology, select

Shown to all

. To set a time period after which the visibility is set from shown to hidden, select

Set visibility period

. To hide your device from other devices, select

Hidden

.

•

My phone's name

— Edit the name shown to other devices with Bluetooth wireless technology.

•

Remote SIM mode

— Enable or disable another device, such as a compatible car kit accessory, to use the SIM card in your device to connect to the network.


Connectivity

Security tips

Select

Menu

>

Settings

and

Connectivity

>

Bluetooth

.

When you are not using Bluetooth connectivity, to control who can find your device and connect to it, select

Bluetooth

>

Off

or

My phone's visibility

>

Hidden

. Deactivating

Bluetooth connectivity does not affect other functions of the device.

Do not pair with or accept connection requests from an unknown device. This helps to protect your device from harmful content.

Send data using Bluetooth connectivity

Several Bluetooth connections can be active at a time. For example, if you are connected to a compatible headset, you can also transfer files to another compatible device at the same time.

1. Open the application where the item you want to send is stored. For example, to send an image to another compatible device, select

Gallery

>

Images & videos

.

2. Tap an item, and select

Options

>

Send

>

Via Bluetooth

.

Devices with Bluetooth wireless technology that are within range are displayed.

Device icons are as follows:

computer

phone

audio or video device

other device

To interrupt the search, select

Stop

.

3. Select the device with which you want to connect.

4. If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. The same passcode must be entered in both devices.

When the connection is established,

Sending data

is displayed.

Tip: When searching for devices, some devices may show only the unique address

(device address). To find the unique address of your device, enter *#2820#.

Pair devices

Select

Menu

>

Settings

and

Connectivity

>

Bluetooth

.

To pair with compatible devices and view your paired devices, open the

Paired devices

tab.


93

Connectivity

Before pairing, create your own passcode (1 to 16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once.

1. To pair with a device, select

Options

>

New paired device

. Devices that are within range are displayed.

2. Select the device, and enter the passcode. The same passcode must be entered on the other device, as well.

3. Some audio accessories connect automatically to your device after pairing.

Otherwise, to connect to an accessory, select

Options

>

Connect to audio device

.

Paired devices are indicated by in the device search.

To set a device as authorised or unauthorised, select from the following:

•

Set as authorised

— Connections between your device and the authorised device can be made without your knowledge. You will not be asked for authorisation or acceptance separately. Use this status only for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust. indicates authorised devices in the paired devices view.

•

Set as unauthorised

— Connection requests from this device must be accepted separately every time.

To cancel a pairing with a device, select

Options

>

Delete

.

To cancel all pairings, select

Options

>

Delete all

.

Receive data using Bluetooth connectivity

When you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, connectivity are indicated by .

is displayed, and the item is placed in the Inbox folder in Messaging. Messages received through Bluetooth

Block devices

Select

Menu

>

Settings

and

Connectivity

>

Bluetooth

.

To block a device from establishing a Bluetooth connection to your device, open the

Paired devices

tab. Tap a device you want to block, if it is not already highlighted, and select

Options

>

Block

.

To unblock a device, open the

Blocked devices

tab, tap a device, if it is not already highlighted, and select

Options

>

Delete

.

To unblock all blocked devices, select

Options

>

Delete all

.


Connectivity

If you reject a pairing request from another device, you are asked if you want to block all future connection requests from this device. If you accept the query, the remote device is added to the list of blocked devices.

Remote SIM mode

Select

Menu

>

Settings

and

Connectivity

>

Bluetooth

.

Before the remote SIM mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorised.

To use the remote SIM mode with a compatible car kit accessory, activate Bluetooth connectivity, and enable the use of the remote SIM mode with your device. Activate the remote SIM mode from the other device.

When the remote SIM mode is on in your device,

Remote SIM mode

is displayed in the home screen. The connection to the wireless network is turned off, as indicated by in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage.

When the wireless device is in the remote SIM mode, you can only use a compatible connected accessory, such as a car kit, to make or receive calls. Your wireless device will not make any calls while in this mode, except to the emergency numbers programmed into your device. To make calls from your device, you must leave the remote SIM mode.

If the device is locked, enter the lock code to unlock it.

To leave the remote SIM mode, press the power key, and select

Exit remote SIM mode

.

USB

Select

Menu

>

Settings

and

Connectivity

>

USB

.

To have the device ask the purpose of the connection each time a compatible data cable is connected, select

Ask on connection

>

Yes

.

If the

Ask on connection

option is turned off or you want to change the mode during an active connection, select

USB connection mode


•

PC Suite

— Use Nokia PC applications such as Nokia Ovi

Suite, and Nokia Software Updater.

•

Mass storage

— Transfer data between your device and a compatible PC.

•

Image transfer

— Print images with a compatible printer.

•

Media transfer

— Synchronise music with Nokia Music or


95

Connectivity

Windows Media Player.

PC connections

You can use your mobile device with a variety of compatible PC connectivity and data communications applications. With Nokia Ovi Suite you can, for example, transfer files and images between your device and a compatible computer.

To use Ovi Suite with USB connection mode, select

PC Suite mode

.

For more information about Ovi Suite, see the support area at www.ovi.com.

Administrative settings

Select

Menu

>

Settings

and

Connectivity

>

Admin. settings

.

To set the online time for the data call connection, select

Data call

. The data call settings affect all access points that use a GSM data call.

Packet data settings

Select

Menu

>

Settings

and

Connectivity

>

Admin. settings

>

Packet data

.

The packet data settings affect all access points using a packet data connection.


•


— If you select

When available

and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker than if the device establishes a packet data connection when needed. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select

When needed

, the device uses a packet data connection only if you start an application or action that needs it.

•

Access point

— The access point name is needed to use your device as a packet data modem to a compatible computer.

SIP settings

Select

Menu

>

Settings

and

Connectivity

>

Admin. settings

>

SIP settings

.

Session Initiation Protocol (SIP) settings are needed for certain network services using

SIP. You may receive the settings in a special text message from your service provider.

You can view, delete, or create these setting profiles in SIP settings.


Connectivity

Access point name control

Select

Menu

>

Settings

and

Connectivity

>

Admin. settings

>

APN control

.

With the access point name control service, you can restrict packet data connections and allow your device to use only certain packet data access points.

This setting is only available if your SIM card supports the access point control service.

To turn the control service on or off, or to change the allowed access points, select

Options

and the corresponding option. To change the options, you need your PIN2 code.

Contact your service provider for the code.


97

17. Search

About Search

Select

Menu

>

Internet

>

Search

.

Search enables you to use various internet-based search services to find, for example, websites, and images. The content and availability of the services may vary.

Start a search

Select

Menu

>

Internet

>

Search

.

To search the contents of your mobile device, enter search terms in the search field, or browse the content categories. While you enter the search terms, the results are organised into categories. The most recently accessed results appear at the top of the result list, if they match your search terms.

To search for web pages on the internet, select

Search the Internet

, a search provider, and enter your search terms in the search field. The search provider you selected is set as your default internet search provider.

If a default search provider is already set, select it to start a search, or select

More search services

to use another search provider.

To change the default service provider, select

Options

>

Select service

.

To change the country or region setting to find more search providers, select

Options

>

Settings

>

Country or region

.


18. Download!

Some features may not be available in your region. Please check the availability with local operator.

About Download!

Select

Menu

>

Download!

.

With Download!, you can discover, preview, buy, download, and upgrade content, services, and applications. Games, ringing tones, wallpapers, applications, and much more are easily accessible. The items are categorised under catalogues and folders from different service providers. The available content depends on your service provider.

Download! uses your network services to access the most up-to-date content. For information on additional items available through Download!, contact your service provider or the supplier or manufacturer of the item.

Download! receives updates continuously and provides you with the latest content your service provider offers for your device.

Items may be chargeable, but you can usually preview them free of charge. For more information about the charges, contact your service provider or the provider of the item.

To update the content in Download! manually, select

Options

>

Refresh content

.

Purchase and download items

To buy the selected item in the main view, a folder, or a catalogue, select

Options

>

Buy

. A submenu opens where you can select the version of the item and view price information. The available options depend on the service provider.

To download an item that is free of charge, select

Options

>

Get

.


99

19. Other applications

Clock

Set time and date

Select

Menu

>

Applications

>

Clock

.

Select

Options

>

Settings


•

Time

— Set the time.

•

Date

— Set the date.

•

Automatic time update

— Set the network to automatically update the time, date, and time zone information for your device (network service).

Alarm clock

Select

Menu

>

Applications

>

Clock

.

To set a new alarm, select

New alarm

. Set the alarm time. Select

Repeat

to set whether and when the alarm is repeated, and select

Done

.

To view your active and inactive alarms, select

Alarms

. When the alarm is active, is displayed. When the alarm is repeated, is displayed.

To remove an alarm, select

Alarms

, scroll to the alarm, and select

Options

>

Remove alarm

.

To turn off the alarm when the alarm expires, select

Stop

. To snooze the alarm, select

Snooze

. If your device is switched off when an alarm expires, your device switches itself on and starts sounding the alarm tone.

To define the snooze time, select

Options

>

Settings

>

Alarm snooze time

.

To change the alarm tone, select

Options

>

Settings

>

Clock alarm tone

.

World clock

Select

Menu

>

Applications

>

Clock

.

To view the current time in different locations, select

World clock

. To add locations to the list, select

Options

>

Add location

.

To set your current location, scroll to a location, and select

Options

>

Set as current location

. The time in your device is changed according to the selected location. Ensure that the time is correct and matches your time zone.


Other applications

Calendar

To open the calendar, select

Menu

>

Calendar

.

Calendar views

To switch between the month, week, day, and to-do note views, select

Options

>

Change view

and the desired view.

To change the starting day of the week or the view that is displayed when you open the calendar, or to modify calendar alarm settings, select

Options

>

Settings

.

To go to a certain date, select

Options

>

Go to date

.

•

•

•

•

•

•

Calendar toolbar


Next view

— Select the month view.

Next view

— Select the week view.

Next view

— Select the day view.

Next view

— Select the to-do view.

New meeting

— Add a new meeting reminder.

New to-do note

— Add a new to-do note.

File manager

About File manager

Select

Menu

>

Applications

>

File mgr.

.

With File manager, you can browse, manage, and open files on your device, memory card, or a compatible external drive.

The available options depend on the memory you select.

Find and organise files

Select

Menu

>

Applications

>

File mgr.

.

To find a file, select

Options

>

Find

. Enter a search text that matches the file name.

To move and copy files and folders, or to create new folders in the memory, select

Options

>

Organise

and the desired option.

To sort files, select

Options

>

Sort by

and the desired category.


101


Edit memory card

Select

Menu

>

Applications

>

File mgr.

.

These options are available only if a compatible memory card is inserted in the device.

Select

Options


•

Memory card options

— Rename or format a memory card.

•

Memory card password

— Password protect a memory card.

•

Unlock memory card

— Unlock a memory card.

Back up files on a memory card

Select

Menu

>

Applications

>

File mgr.

.

To back up files, select the file types you want to back up on a memory card and

Options

>

Back up now

. Ensure that your memory card has enough free memory for the files that you have chosen to back up.

Application manager

About Application manager

Select

Menu

>

Settings

and

Application mgr.

.

With Application manager, you can see the software packages installed in your device.

You can view details of installed applications, remove applications, and define installation settings.

You can install the following types of applications and software to your device:

• JME applications based on Java™ technology with the .jad or .jar file extensions

• Other applications and software suitable for the Symbian operating system with the .sis or .sisx file extensions

• Widgets with the .wgz file extension

Only install software that is compatible with your device.

Install applications

You can transfer installation files to your device from a compatible computer, download them during browsing, or receive them in a multimedia message, as an e-mail attachment, or using other connectivity methods, such as Bluetooth connectivity.

You can use Nokia Application Installer in Nokia Ovi Suite to install an application to your device.

Icons in Application manager indicate the following:



SIS or SISX application

Java application

widgets

application installed in the memory card


Verified testing.

Before installation, note the following:

• To view the application type, version number, and the supplier or manufacturer of the application, select

Options

>

View details

.

To view the security certificate details of the application, select

Details:

>

Certificates:

>

View details

. Control the use of digital certificates in Certificate management.

• If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full backup copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the backup copy.

The JAR file is required for installing Java applications. If it is missing, the device may ask you to download it. If there is no access point defined for the application, you are asked to select one.

To install an application, do the following:

1. To locate an installation file, select

Menu

>

Settings

and


.

Alternatively, search installation files using File manager, or select

Messaging

>

Inbox

, and open a message that contains an installation file.

2. In Application manager, select

Options

>

Install

. In other applications, select the installation file to start the installation.

During installation, the device shows information about the progress of the installation. If you install an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.

To start an installed application, locate the application in the menu, and select the application. If the application does not have a default folder defined, it is installed in the Installed apps. folder in the main menu.

To see which software packages are installed or removed and when, select

Options

>

View log

.


103


Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning.

After you install applications to a compatible memory card, installation files (.sis, .sisx) remain in the device memory. The files may use large amounts of memory and prevent you from storing other files. If the .sis file is a message attachment, delete the message from the Messaging inbox.

Remove applications

Select

Menu

>

Settings

and


.

To remove a software package, select

Installed apps.

>

Options

>

Uninstall

. Select

Yes

to confirm.

If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software.

If another software package depends on the software package that you removed, the other software package may stop working. Refer to the documentation of the installed software package for details.

Application manager settings

Select

Menu

>

Settings

and


.

Select

Installation settings


•

Software installation

— Select whether Symbian software that has no verified digital signature can be installed.

•

Online certificate check

— Select to check the online certificates before installing an application.

•

Default web address

— Set the default web address used when checking online certificates.

RealPlayer

With RealPlayer, you can play video clips or stream media files over the air without saving them to the device first.

RealPlayer does not necessarily support all file formats or all the variations of file formats.

Select

Menu

>

Applications

>

RealPlayer

.


•

•

•

•


RealPlayer toolbar

In the Video clips, Streaming links, and Recently played views, the following toolbar icons may be available:

Send

— Send a video clip or streaming link.

Play

— Play the video clip or video stream.

Delete

— Delete the video clip or streaming link.

Remove

— Remove a file from the recently played list.

•

•

•

•

Play video clips

Select

Menu

>

Applications

>

RealPlayer

.

To play a video clip, select

Video clips

, and a clip.

To list recently played files, in the application main view, select

Recently played

.

In the list of video clips, scroll to a clip, select

Options


•

Use video clip

— Assign a video to a contact or set it as a ringing tone.

•

Mark/Unmark

— Mark items in the list to send or delete multiple items at the same time.

•

View details

— View details of the selected item, such as format, resolution, and duration.

•

Settings

— Edit settings for video playback and streaming.

In the Video clips, Recently played and Streaming links views, the following toolbar icons may be available:

Send

— Send a video clip or streaming link.

Play

— Play the video clip or video stream.

Delete

— Delete the video clip or streaming link.

Remove

— Remove a file from the recently played list.

Stream content over the air

In RealPlayer, you can only open an RTSP link. However, RealPlayer plays a RAM file if you open an HTTP link to it in a browser.

Select

Menu

>

Applications

>

RealPlayer

.

To stream content over the air (network service), select

Streaming links

and a link. You can also receive a streaming link in a text message or multimedia message, or open a link on a web page. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.


105


Recorder

Select

Menu

>

Applications

>

Recorder

.

With the Recorder application, you can record voice memos and telephone conversations.

The recorder cannot be used when a data call or GPRS connection is active.

To record a sound clip, select .

To stop recording a sound clip, select .

To listen to the sound clip, select .

To select the recording quality or where you want to save your sound clips, select

Options

>

Settings

.

Recorded sound clips are saved in Gallery.

To record a telephone conversation, open recorder during a voice call, and select .

Both parties hear a tone every 5 seconds during recording.

Write notes

Select

Menu

>

Applications

>

Notes

. To write a note, select

Options

>

New note

.

Tap the note field to enter text, and select .

You can save plain text files (.txt file format) you receive to Notes.

Calculator

Select

Menu

>

Applications

>

Calculator

.

This calculator has limited accuracy and is designed for simple calculations.

To make a calculation, enter the first number of the calculation. To remove a number, select C. Select a function such as add or subtract. Enter the second number of the calculation, and select =.

Converter

With Converter, you can convert measures from one unit to another.

The converter has limited accuracy, and rounding errors may occur.

Select

Menu

>

Applications

>

Converter

.



Dictionary

Select

Menu

>

Applications

>

Dictionary

.

To translate words from one language to another, enter text in the search field. As you enter text, suggestions of words to translate are displayed. To translate a word, select the word from the list. All languages may not be supported.

Select

Options


•

Listen

— Listen to the selected word.

•

History

— Find previously translated words from the current session.

•

Languages

— Change the source or target language, download languages from the internet, or remove a language from the dictionary. You cannot remove the English language from the dictionary. You can have two additional languages installed, besides English.

•

Speech

— Edit the voice feature settings. You can adjust the speed and volume of the voice.


107

20. Settings

Some settings may be preset for the device by your service provider, and you may not be able to change them.

Phone settings

Date and time settings

Select

Menu

>

Settings

and

Phone

>

Date and time

.


•

Time

— Enter the current time.

•

Time zone

— Select your location.

•

Date

— Enter the date.

•

Date format

— Select the date format.

•

Date separator

— Select the symbol that separates days, months, and years.

•

Time format

— Select the time format.

•

Time separator

— Select the symbol that separates hours and minutes.

•

Clock type

— Select the clock type.

•

Clock alarm tone

— Select the tone for the alarm clock.

•

Alarm snooze time

— Adjust the snooze time.

•

Workdays

— Select your working days. You can then set an alarm only for working day mornings, for example.

•

Automatic time update

— To update the time, date, and time zone, select

On

. This network service may not be available on all networks.

Language settings

Select

Menu

>

Settings

and

Phone

>

Language

.

To change the device language, select

Phone language

.

To change the writing language, select


.

To turn predictive text input on or off, select

Predictive text

.

Display settings

Select

Menu

>

Settings

and

Phone

>

Display

.


•

Brightness

— Adjust the brightness of your device display.

•

Font size

— Select the size of text and icons on the display.


Settings

•

Welcome note / logo

— Set a note or image to be displayed when you switch on the device.

•

Light time-out

— Set how long the light stays on when you stop using the device.

Voice commands

To activate enhanced voice commands to start applications and profiles, press and hold the call key in the home screen.

To control your device with enhanced voice commands, press and hold the call key in the home screen, and speak a voice command. The voice command is the name of the application or profile displayed in the list.

Select

Menu

>

Settings

and

Phone

>

Voice commands

.

Select

Options


•

Change command

— Edit the voice commands.

•

Playback

— Listen to the synthesised voice tag.

•

Remove voice command

— Remove a voice command that you added manually.

•

Settings

— Adjust the settings.

Accessory settings

Select

Menu

>

Settings

and

Phone

>

Accessories

.

Some accessory connectors indicate which type of accessory is connected to the device.

Select an accessory and from the following:

•

Default profile

— Set the profile that you want activated each time you connect a certain compatible accessory to your device.

•

Automatic answer

— Select whether you want the device to answer an incoming call automatically after 5 seconds. If the ringing type is set to

Beep once

or

Silent

, automatic answer is disabled.

•

Lights

— Set whether lights remain on after the time-out.

The available settings depend on the type of accessory.

Application settings

Select

Menu

>

Settings

and

Phone

>

Application sett.

.

In application settings, you can edit the settings of some of the applications in your device.

To edit the settings, you can also select

Options

>

Settings

in each application.


109

Settings

Device updates

Select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Device updates

.

With Device updates, you can connect to a server and receive configuration settings for your device, create new server profiles, view existing software version and device information, or view and manage existing server profiles.

If software updates over the air are supported by your network, you may also be able to request updates through the device.

You may receive server profiles and different configuration settings from your service providers and company information management department. These configuration settings may include connection and other settings used by different applications in your device.

To connect to the server and receive configuration settings for your device, select

Options

>

Server profiles

, a profile, and

Options

>

Start configuration

.

To create a server profile, select

Options

>

Server profiles

>

Options

>

New server profile

.

To delete a server profile, select the profile and

Options

>

Delete

.

To check for software updates, select

Options

>

Check for updates

.

Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update.

Downloading software updates may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.

Make sure that the device battery has enough power, or connect the charger before starting the update.

Security settings

Phone and SIM

Select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Security

>

Phone and SIM card

.


•

PIN code request

— When active, the code is requested each time the device is switched on. Deactivating the PIN code request may not be allowed by some SIM cards.

•

PIN code

and

PIN2 code

— Change the PIN and PIN2 code. These codes can only include numbers. Avoid using access codes similar to the emergency numbers to prevent accidental dialling of the emergency number. If you forget the PIN or PIN2


Settings

code, contact your service provider. If you forget the lock code, contact a Nokia Care point or your service provider.

•

Lock code

— The lock code is used to unlock the device. To avoid unauthorised use of your device, change the lock code. The preset code is 12345. The new code can be

4-255 characters long. Alphanumeric characters and both uppercase and lowercase characters can be used. The device notifies you if the lock code is not properly formatted. Keep the new code secret and separate from your device.

•

Phone autolock period

— To avoid unauthorised use, you can set a time-out after which the device automatically locks. A locked device cannot be used until the correct lock code is entered. To turn off autolock, select

None

.

•

Lock if SIM card changed

— Set the device to ask for the lock code when an unknown

SIM card is inserted into your device. The device maintains a list of SIM cards that are recognised as the owner’s cards.

•

Remote phone locking

— Enable or disable remote lock.

•

Closed user group

— Specify a group of people to whom you can call and who can call you (network service).

•

Confirm SIM services

— Set the device to display confirmation messages when you are using a SIM card service (network service).

In the offline or flight profiles, you may need to unlock the device and change to the calling profile before making a call.

When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.

Certificate management

Select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Security

>

Certificate management

.

Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.


•

Authority certificates

— View and edit authority certificates.

•

Trusted site certificates

— View and edit trusted site certificates.

•

Personal certificates

— View and edit personal certificates.

•

Phone certificates

— View and edit device certificates.

Digital certificates do not guarantee safety; they are used to verify the origin of software.

Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown, even if the


111

Settings

certificate should be valid, check that the current date and time in your device are correct.

View certificate details — check authenticity

You can only be sure of the correct identity of a server when the signature and the validity period of a server certificate have been checked.

You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device.

To check the details of a certificate, select

Options

>

Certificate details

. The validity of the certificate is checked, and one of the following notes may be displayed:

•

Certificate not trusted

— You have not set any application to use the certificate.

•

Expired certificate

— The certificate validity period has ended.

•

Certificate not valid yet

— The certificate validity period has not yet begun.

•

Certificate corrupted

— The certificate cannot be used. Contact the certificate issuer.

Change the trust settings

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.

To change the settings for an authority certificate, select

Options

>

Trust settings

.

Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:

•

Symbian installation

:

Yes

— The certificate is able to certify the origin of a new

Symbian operating system application.

•

Internet

:

Yes

— The certificate is able to certify servers.

•

App. installation

:

Yes

— The certificate is able to certify the origin of a new Java application.

To change the value, select

Options

>

Change trust setting

.

Security module

Select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Security

>

Security module

.

To view or edit a security module (if available), select it from the list.

To view detailed information about a security module, select

Options

>

Security details

.

Restore original settings

Select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Factory settings

.

You can reset some of the settings to their original values. To do this, you need the lock code.


Settings

After resetting, the device may take a longer time to power on. Documents and files are unaffected.

Protected content

To manage digital rights licences, select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Security

>

Protected content

.

Digital rights management

Content owners may use different types of digital rights management (DRM) technologies to protect their intellectual property, including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can access content protected with WMDRM 10, OMA DRM 1.0, and OMA DRM 2.0. If certain

DRM software fails to protect the content, content owners may ask that such DRM software's ability to access new DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-protected content already in your device. Revocation of such DRM software does not affect the use of content protected with other types of

DRM or the use of non-DRM-protected content.

Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content.

If your device has OMA DRM-protected content, to back up both the activation keys and the content, use the backup feature of Nokia Ovi Suite. Other transfer methods may not transfer the activation keys which need to be restored with the content for you to be able to continue the use of OMA DRM-protected content after the device memory is formatted. You may also need to restore the activation keys in case the files on your device get corrupted.

If your device has WMDRM-protected content, both the activation keys and the content will be lost if the device memory is formatted. You may also lose the activation keys and the content if the files on your device get corrupted. Losing the activation keys or the content may limit your ability to use the same content on your device again. For more information, contact your service provider.

Some activation keys may be connected to a specific SIM card, and the protected content can be accessed only if the SIM card is inserted in the device.

Notification lights

Select

Menu

>

Settings

and

Phone

>

Notification lights

.

To turn the standby breathing light on or off, select

Standby br. light

. When the standby breathing light is turned on, the menu key lights up periodically.

To turn the notification light on or off, select

Notification light

. When the notification light is turned on, the menu key lights up for a period you define to notify of missed events, such as missed calls or unread messages.


113

Settings

Call settings

Call settings

Select

Menu

>

Settings

. Select

Calling

>

Call


•

Send my caller ID

— Select

Yes

to show your phone number to the person you are calling. To use the setting agreed upon with your service provider, select

Set by network

) (network service).

•

Call waiting

— Activate your device to notify you of incoming calls while you are in a call (network service), or check whether the function is activated.

•

Reject call with message

— Activate rejecting a call with a text message to inform the caller why you could not answer the call.

•

Message text

— Write the standard text message that is sent when you reject a call.

•

Automatic redial

— Set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialling, press the end key.

•

Show call duration

— Set the length of a call to be displayed during the call.

•

Summary after call

— Set the length of a call to be displayed after the call.

•

Speed dialling

— Activate speed dialling.

•

Anykey answer

— Activate anykey answer.

•

Line in use

— This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select

Line 2

and have not subscribed to this network service, you are not able to make calls. When line 2 is selected, is shown in the home screen.

•

Line change

— Select to prevent line selection (network service), if supported by your SIM card. To change this setting, you need the PIN2 code.

Call divert

Select

Menu

>

Settings

and

Calling

>

Call divert

.

Call divert allows you to divert incoming calls to your voice mailbox or another phone number. For details, contact your service provider.

1. Select the type of calls to divert and a diverting option. For example, to divert all voice calls, select

Voice calls

>

All voice calls

.

2. To activate call divert, select

Activate

.

3. To divert calls to your voice mailbox, select

To voice mailbox

.

4. To divert calls to another phone number, select

To other number

, and enter the number, or select

Find

to retrieve a number saved in the contacts list.

Several diverting options can be active at the same time. When all calls are diverted,

is displayed in the home screen.


Settings

Call barring and call diverting cannot be active at the same time.

Call barring

Select

Menu

>

Settings

and

Calling

>

Call barring

.

Call barring (network service) allows you to restrict the calls that you make or receive with the device. For example, you can restrict all outgoing international calls or incoming calls when you are abroad. To change the settings, you need the barring password from your service provider.

Call barring and call diverting cannot be active at the same time.

When calls are barred, calls may be possible to certain official emergency numbers.

Voice call barring

Select the desired barring option and

Activate

,

Deactivate

, or

Check status

. Call barring affects all calls, including data calls.


115

21. Troubleshooting

To view frequently asked questions about your device, see the product support pages at www.nokia.com/support.

Q: What is my password for the lock, PIN, or PUK codes?

A: The default lock code is 12345. If you forget the lock code, contact your device dealer.

If you forget a PIN or PUK code, or if you have not received such a code, contact your network service provider. For information about passwords, contact your access point provider, for example, a commercial internet service provider (ISP) or network service provider.

Q: How do I close an application that is not responding?

A: Press and hold the menu key. Select and hold the application icon, and select

Exit

.

Q: Why do images look smudgy?

A: Ensure that the camera lens protection windows are clean.

Q: Why do missing, discoloured, or bright dots appear on the screen every time I switch on my device?

A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.

Q: Why can’t I find my friend’s device while using Bluetooth connectivity?

A: Check that both devices are compatible, have activated Bluetooth connectivity, and are not in hidden mode. Check also that the distance between the two devices is not over 10 metres (33 feet) and that there are no walls or other obstructions between the devices.

Q: Why can’t I end a Bluetooth connection?

A: If another device is connected to your device, you can end the connection from the other device or deactivate Bluetooth connectivity in your device. Select

Menu

>

Settings

and

Connectivity

>

Bluetooth

>

Bluetooth

>

Off

.

Q: Why can't I see a wireless LAN (WLAN) access point even though I know I'm within its range?

A: The WLAN access point may use a hidden service set identifier (SSID). You can only access networks that use a hidden SSID if you know the correct SSID, and have created a WLAN internet access point for the network on your Nokia device.

Q: How do I turn the wireless LAN (WLAN) off on my Nokia device?

A: The WLAN on your Nokia device turns off when you are not connected or trying to connect to another access point, or not scanning for available networks. To further


Troubleshooting

reduce battery consumption, you can specify that your Nokia device does not scan, or scans less often, for available networks in the background. The WLAN turns off in between background scans.

To change the background scan settings, do the following:

1. Select

Menu

>

Settings

and

Connectivity

>

Wireless LAN

>

Options

>

Settings

.

2. To increase the background scan time interval, adjust the time in

Scan for networks

. To stop background scans, select

Options

>

Settings

>


>

Never

.

3. To save your changes, select

Back

.

When


is set to

Never

, the WLAN availability icon is not displayed in the home screen. However, you can still manually scan for available

WLAN networks, and connect to WLAN networks as usual.

Q: What do I do if the memory is full?

A: Delete items from the memory. If

Not enough memory to perform operation.

Delete some data first.

or

Memory low. Delete some data from phone memory.

is displayed when you are deleting several items at the same time, delete items one by one, beginning with the smallest items.

Q: Why can’t I select a contact for my message?

A: The contact card does not have a phone number, address, or e-mail address. Select

Menu

>

Contacts

and the relevant contact, and edit the contact card.

Q: How can I end the data connection when the device starts a data connection again and again?

A: The device may be trying to retrieve a multimedia message from the multimedia message centre. To stop the device from making a data connection, select

Menu

>

Messaging

and

Options

>

Settings

>

Multimedia message

>

Multimedia retrieval

. Select

Manual

to have the multimedia messaging centre save messages to be retrieved later, or

Off

to ignore all incoming multimedia messages. If you select

Manual

, you receive a notification when you have a new message in the multimedia message centre. If you select

Off

, the device does not make any network connections related to multimedia messaging. To set the device to use a packet data connection only if you start an application or action that needs it, select

Menu

>

Settings

and

Connectivity

>

Admin. settings

>

Packet data

>


>

When needed

. If this does not help, switch the device off and then on again.

Q: Can I use my Nokia device as a fax modem with a compatible PC?

A: You cannot use your device as a fax modem. However, with call diverting (network service), you can divert incoming fax calls to a fax number.


117

Troubleshooting

Q: How do I calibrate the screen?

A: The screen is calibrated at the factory. If it is necessary to recalibrate the screen, select

Menu

>

Settings

and

Phone

>

Touch input

>

Touch screen calibration

. Follow the instructions.

Q: Why do I get the error message Expired certificate or Certificate not valid yet when I am installing a downloaded application?

A: If

Expired certificate

or

Certificate not valid yet

is displayed, even if the certificate should be valid, check that the current date and time in your device are correct. You may have skipped the setting of date and time when starting the device for the first time, or the mobile network may have failed to update these settings to your device. To resolve this, select

Menu

>

Settings

and

Phone

>

Phone mgmt.

>

Factory settings

. Restore the factory settings, and when the device restarts, set the correct date and time.


22. Green tips

Here are tips on how you can contribute to protecting the environment.

Save energy

When you have fully charged the battery and disconnected the charger from the device, unplug the charger from the wall outlet.

You do not need to charge your battery so often if you do the following:

• Close and disable applications, services, and connections when not in use.

• Decrease the brightness of the screen.

• Set the device to enter the power saver mode after the minimum period of inactivity, if available in your device.

• Disable unnecessary sounds, such as keypad and ringing tones.

Recycle

Most of the materials in a Nokia phone are recyclable. Check how to recycle your Nokia products at www.nokia.com/werecycle, or with a mobile device, www.nokia.mobi/ werecycle.

Recycle packaging and user guides at your local recycling scheme.

Save paper

This user guide helps you get started with your device. For more detailed instructions, open the in-device help (in most applications, select

Options

>

Help

). For further support, see www.nokia.com/support.

Learn more

For more information on the environmental attributes of your device, see www.nokia.com/ecodeclaration.


119

Accessories

Warning: Use only batteries, chargers, and accessories approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.


Battery

Battery and charger information

Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4U. Nokia may make additional battery models available for this device.

This device is intended for use when supplied with power from the following chargers:

AC-8. The exact charger model number may vary depending on the type of plug. The plug variant is identified by one of the following: E, EB, X, AR, U, A, C, K, or UB.

The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with

Nokia approved chargers designated for this device.

If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.

Safe removal. Always switch the device off and disconnect the charger before removing the battery.

Proper charging. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

Avoid extreme temperatures. Always try to keep the battery between 15°C and 25°C

(59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the battery.

A device with a hot or cold battery may not work temporarily. Battery performance is particularly limited in temperatures well below freezing.

Do not short-circuit. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.

Disposal. Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Leak. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. In the event of a battery leak, prevent battery liquid contact with skin or eyes. If this happens, flush the affected areas immediately with water, or seek medical help.


121

Battery

Damage. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged.

Correct use. Use the battery only for its intended purpose. Improper battery use may result in a fire, explosion, or other hazard. If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged, take it to a service centre for inspection before continuing to use it. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children.

Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from a Nokia authorised service centre or dealer, and inspect the hologram label using the following steps:

Authenticate hologram

1. When you look at the hologram on the label, you should see the

Nokia connecting hands symbol from one angle and the Nokia

Original Enhancements logo when looking from another angle.

2. When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively.

Successful completion of the steps is not a total assurance of the authenticity of the battery. If you cannot confirm authenticity or if you have any reason to believe that your Nokia battery with the hologram on the label is not an authentic Nokia battery, you should refrain from using it, and take it to the nearest Nokia authorised service centre or dealer for assistance.

To find out more about original Nokia batteries, see www.nokia.com/battery.


Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.

• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.

• Use chargers indoors.

• Always create a backup of data you want to keep, such as contacts and calendar notes.

• To reset the device from time to time for optimum performance, power off the device and remove the battery.

These suggestions apply equally to your device, battery, charger, or any accessory. If any device is not working properly, take it to the nearest authorised service facility for service.

Recycle

Always return your used electronic products, batteries, and packaging materials to a dedicated collection point. This way you help prevent uncontrolled waste disposal and


123

Care and maintenance

promote the recycling of materials. More detailed information is available from the product retailer, local waste authorities, national producer responsibility organisations, or your local Nokia representative. Check how to recycle your Nokia products at www.nokia.com/werecycle, or if browsing on a mobile device, www.nokia.mobi/ werecycle.

The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life.

This requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. For more environmental information, see the product Eco-

Declarations at www.nokia.com/environment.


Additional safety information

Small children

Your device and its accessories may contain small parts. Keep them out of the reach of small children.

Operating environment

This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimetres (7/8 inch) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.

To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere with the function of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine whether they are adequately shielded from external RF energy. Switch off your device when regulations posted instruct you to do so. Hospitals or health care facilities may use equipment sensitive to external RF energy.

Implanted medical devices

Manufacturers of medical devices recommend a minimum separation of 15.3

centimetres (6 inches) between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should:

• Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.


125


• Not carry the wireless device in a breast pocket.

• Hold the wireless device to the ear opposite the medical device.

• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.

• Follow the manufacturer directions for the implanted medical device.

If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.

Hearing aids

Some digital wireless devices may interfere with some hearing aids.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added.

Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or accessories.

For vehicles equipped with an air bag, remember that air bags inflate with great force.

Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere. Obey all posted instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include areas where you would be advised to turn off your vehicle



engine, below deck on boats, chemical transfer or storage facilities and where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.

Emergency calls

Important: This device operates using radio signals, wireless networks, landline networks, and user-programmed functions. If your device supports voice calls over the internet (internet calls), activate both the internet calls and the cellular phone. The device will attempt to make emergency calls over both the cellular networks and through your internet call provider if both are activated. Connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also need to complete the following:

• Insert a SIM card if your device uses one.

• Remove certain call restrictions you have activated in your device.

• Change your profile from offline profile mode to an active profile.

• If the screen and keys are locked, slide the lock switch on the side of the device to unlock them.

2. Press the end key as many times as needed to clear the display and ready the device for calls.

3. To open the dialler, select

Dialler

.

4. Enter the official emergency number for your present location. Emergency numbers vary by location.

5. Press the call key.

When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

Certification information (SAR)

This mobile device meets guidelines for exposure to radio waves.

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organisation ICNIRP and


127


include safety margins designed to assure the protection of all persons, regardless of age and health.

The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0

watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station.

The highest SAR value under the ICNIRP guidelines for use of the device at the ear is

0.71 W/kg.

Use of device accessories may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band.

Additional SAR information may be provided under product information at www.nokia.com.

Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry

Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.15 W/kg and when properly worn on the body is 0.74 W/kg.


Index

A

access codes 13

access points 86, 87

groups 88

accessories 109

alarm

calendar note 101

alarm clock 100

answering calls 33

antennas 27

application manager 102

settings 104

application settings 109

applications 102

attachments 48, 50

audio messages 46

auto-update for time/date 100

B

backing up device memory 101

battery

saving power 14

blogs 77

Bluetooth connectivity

blocking devices 94

device address 93

device visibility 92

pairing devices 93

receiving data 94

security 93 sending data 93

settings 92 turning on/off 92

bookmarks 78

browser

bookmarks 78

browsing pages 75, 76

cache memory 79

downloads 78

searching content 77

security 79


toolbar 76

widgets 77

C

cable connection 95

cache memory 79

calculator 106

calendar 101

toolbar 101

calendar alarm 101

call log 36

call waiting 34

calls 32

answering 33 conference 33

dialled 35

duration of 36

missed 35

options during 32

received 35

redialling 114

rejecting 33

restricting

See

fixed dialling

settings 114

camera

assigning images to contacts 66 flash 66 image mode 66

indicators 64

location information 67

options 66

recording 69

scenes 67

self-timer 68

sending images 66

sequence mode 68 video mode 68

capture settings

in camera 65

cell broadcast messages 51

certificates 111

129

Index

clock 100

setting date 100 setting time 100

computer connections 96

See also

conference calls 33

contacts

copying 39

data connections

defaults 38 deleting 38 editing 38 images in 38 names and numbers 38

ringing tones 39

saving 38 sending 38

synchronising 91

voice tags 38

copyright protection 113

D data connections

cable 95

device updates 110

PC connectivity 96

synchronisation 91

date and time 100

date and time settings 108

declining calls

See

rejecting calls

device updates 110

dialled numbers 35

dictionary 107

dismissing calls 33

display rotation 29

display settings 108

double-tap 22

Download! 99

purchasing and downloading

items 99

downloads 78

drag 22

DRM (digital rights

management) 113

duration of calls 36

130

E

e-mail 50

e-mail messages 48

end all calls option 34

F factory settings

restoring 112

feeds, news 77

file manager 101, 102

backing up files 102

organising files 101

fixed dialling 40

G

gallery 71

organising 71 viewing 71 viewing images 71 viewing videos 71

general information 11

GPS

position requests 81

GPS (Global Positioning System) 80

H

headset 30

help application 11

I

IAPs (internet access points) 86

inbox

message 47

inbox, message 47

indicators and icons 26

installing applications 102

internet connection 75

See also

browser

J

Java applications 102

JME Java application support 102


K

keypad lock 21

keys and parts 19

L

landmarks 82

language settings 108

licences 113

location information 80

lock code 13

lock switch 21

locking device with SMS 29

locking the keys 21

loudspeaker 29

M

mail for exchange 50

mailbox

e-mail 48

voice 33

media

music player 55

RealPlayer 104

media bar 24 media key 24

memory

clearing 14

web cache 79

memory card

backing up files 102 editing 102

menu 22

messages

e-mail 48

folders for 46

icon for incoming 47

multimedia 48

settings 52

voice 33

Mini Map 76

MMS (multimedia message

service) 46, 48

multimedia messages 46, 48

music player 55

playlists 56


transferring music 57

music store 58

muting sound 33

N

navigation tools 80 network positioning 80

network settings 84

news feeds 77

Nokia Care 24

Nokia Music 57

Nokia Music Store 58

Nokia support information 11

notes 106

notification light 113

O

offline profile 28

outbox, message 46

P packet data connection

access point settings 88

counters 36

settings 96

page overview 76

personal certificates 111

personalisation 54

photos

See

camera

PIN code 13

PIN2 code 13

podcasting

downloads 59

settings 58

positioning information 80

positioning settings 82

presentations, multimedia 48

profiles 54

offline restrictions 28

personalisation 54

proximity sensor 32

proxy settings 89

PUK codes 13

Index

131

Index

R radio

listening 59

stations 60

RealPlayer 104

recording settings

in camera 65

recording video clips 68

rejecting calls 33

remote lock

See

locking device with SMS

remote mailbox 48

remote SIM mode 95

removing applications 104

removing SIM card 30

ringing tones 54

roaming 84

S scenes

image and video 67

searching 98

security

certificates 111

WAPI 90

web browser 79

WEP 90

WPA 90

security code 13

security module 112

select 22

self-timer

camera 68

sensors 29

sent messages folder 46

service commands 51

service messages 48

settings 65, 108, 109

access point name control 97

access points 87, 88

applications 109

Bluetooth connectivity 92

call barring 115

call divert 114 calls 114

132

certificates 111

date and time 108 display 108 language 108

network 84

packet data 96

packet data access points 88

podcasting 58

positioning 82

SIP 96

video centre 63

WLAN 87, 90

WLAN internet access points 89

Share online 73

accounts 73 activating services 73

creating posts 74 posting 74

subscribing 73

sharing media files online 73

shooting modes

camera 67

SIM card 30

inserting 16

messages 51

SIM card security 110

SIP 96

SMS (short message service) 46

software

updating 12

software applications 102

software updates 12

songs 55

speakerphone 29

speed dialling 34

stylus 20

support resources 11

swipe 22

Symbian applications 102

synchronisation of data 91

T

tap 22

text messages

receiving and reading 47 replying to 47


sending 46

settings 52

SIM messages 51

themes 54

time and date 100

tones 54

transferring content 25

troubleshooting 116

U updates

device software 12

uploading media files 73

USB cable connection 95

useful information 11

V

Video Centre 61

video centre

downloading 61

my videos 62

transferring videos 63

video feeds 62

viewing 61

voice calls

See

calls

voice commands 35, 109

See also

voice dialling

voice control 109

voice dialling 35

volume controls 29

W

wallpaper 54

WAPI 90

web connection 75

web logs 77

week settings 101

Welcome 25

WEP 90

widgets 77

wireless LAN (WLAN) 84

wireless LAN settings 87

WPA 90


Z

zooming 66, 69

Index

133

Nokia XpressMusic 5530 mobile phone User Guide

Assistant Bot

Nokia 5530 XpressMusic User Guide

Contents

Safety

About your device

Network services

ActiveSync

Magnets and magnetic fields

1. Find help

In-device help

Support

Software updates using your PC

Software updates over the air

Settings

Access codes

Prolong battery life

Free memory

2. Get started

Insert the SIM card

Insert the battery

Insert the memory card

Charge the battery

Keys and parts

Stylus

Switch the device on

Lock the keys and touch screen

Home screen

Interactive display elements

Start using the contacts bar

Change the home screen theme

Swipe to unlock

Music keys

Access the menu

Touch screen actions

Tap and double-tap

Select

Drag

Swipe

Scroll

Touch screen backlight

Media key

Change the ringing tone

Nokia support

Configuration settings service

Nokia Care services

Maintenance

3. Your device

Welcome

Transfer content

Transfer content for the first time

Display indicators

Contacts bar

Start using the contacts bar

Antenna locations

Offline profile

Shortcuts

Volume and loudspeaker control

Sensor settings and display rotation

Remote lock

Headset

Remove the SIM card

Remove the memory card

4. Make calls

Proximity sensor

Calls

During a call

Voice mailbox

Answer or reject a call

Make a conference call

Speed dial a phone number

Call waiting

Voice dialling

Make a call with a voice tag

Log

Recent calls

Packet data

Call duration

Monitor all communication events

5. Contacts