DrayTek Vigor2130 routers User manual
Below you will find brief information for routers Vigor2130. This guide explains how to configure a VPN connection between a DrayTek Vigor2130 router and a remote computer running Ubuntu 10.4, allowing secure access to resources on the local network from the remote computer. It covers steps for both the router configuration and the remote client setup, offering a clear and practical approach to establishing a secure VPN connection.
advertisement
▼
Scroll to page 2
of
5
Create VPN between Vigor router and a remote computer under Ubuntu 10.4 Suppose the remote client uses Ubuntu 10.4 (Linux operation system). Here we take Vigor2130 as an example. 1. Open the web configurator of Vigor2130. 2. Ensure PPTP VPN Service is enabled in Vigor2130. 1 3. Go to VPN and Remote Access>>PPTP Remote Dial-In to create a new PPTP Remote Dial-In profile. After finished the configuration, click OK. 4. Make sure the remote computer (with Ubuntu 10.4) is able to access Internet by ping 8.8.8.8. 2 5. On the side of the remote client, open System>>Preference>>Network Connections>>VPN. Click Add to create a new VPN profile. 6. Choose PPTP as VPN Connection Type then click Create. 3 7. In the following page, fill in the VPN settings. Gateway: Type the VPN server IP address. Username: Type the username set on Vigor router’s PPTP remote dial in profile. Password: Type the password set on Vigor router’s PPTP remote dial in profile. Click Advanced to view detailed settings. 8. In Advanced page, enable Point to Point encryption (MPPE) then click OK. 4 9. Select the VPN profile you want to perform the VPN connection. 10. Now, the remote computer is able to ping PC behind Vigor2130 when VPN connection is up. 5
advertisement
Key Features
- PPTP VPN service
- Remote Dial-In Profile creation
- Point-to-Point Encryption (MPPE)
- Secure connection
- Access local network resources remotely
- Easy-to-follow configuration steps
Frequently Answers and Questions
How do I enable PPTP VPN service on the Vigor2130?
You need to access the web configurator of your Vigor2130 router and ensure that the PPTP VPN service is enabled. This is typically done in the "VPN and Remote Access" section of the router's settings.
What information do I need to configure the VPN connection on the remote computer?
You will need the VPN server's IP address, the username and password set for the PPTP remote dial-in profile on the Vigor2130 router, and the option to enable Point-to-Point Encryption (MPPE) for added security.
How do I know if the VPN connection is established?
Once the VPN connection is up, the remote computer should be able to ping devices on the local network behind the Vigor2130 router. This indicates a successful VPN connection.
Related manuals
Download
PDF
advertisement