Having TROUBLE with operation?
ENGLISH
Please reset your unit
FRANÇAIS
Refer to page of How to reset your unit
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
KD-R521/KD-R422/
KD-R421/KD-R45
CD RECEIVER / RÉCEPTEUR CD
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of
Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Cher(e) client(e),
Cet appareil est conforme aux directives et
normes européennes en vigueur concernant la
compatibilité électromagnétique et à la sécurité
électrique.
Représentant européen de la société Victor
Company of Japan, Limited:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Allemagne
For canceling the display demonstration, see page 4. / Pour annuler la démonstration des
affichages, référez-vous à la page 4.
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
EN, FR
© 2010 Victor Company of Japan, Limited
CoverRear_KD-R521_003A_1.indd 1-2
GET0705-003A
1010DTSMDTJEIN
[E/EU]
9/7/10 5:20:05 PM
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
WARNING:
Stop the car before operating the unit.
Caution:
Battery
Products
Information for Users on Disposal of
Old Equipment and Batteries
[European Union only]
These symbols indicate that the product and
the battery with this symbol should not be
disposed as general household waste at its
end-of-life.
If you wish to dispose of this product and
the battery, please do so in accordance with
applicable national legislation or other rules
in your country and municipality.
By disposing of this product correctly, you
will help to conserve natural resources and
will help prevent potential negative effects
on the environment and human health.
Notice:
The sign Pb below the symbol for batteries
indicates that this battery contains lead.
JVC bears no responsibility for any loss of data
in an iPod/iPhone and/or USB mass storage
class device while using this System.
2
Adjust the volume so that you can hear sounds
outside the car. Driving with the volume too
high may cause an accident.
Caution on volume setting:
Digital devices (CD/USB) produce very little
noise compared with other sources. Lower the
volume before playing these digital sources to
avoid damaging the speakers by the sudden
increase of the output level.
Caution for DualDisc playback:
The Non-DVD side of a “DualDisc” does not
comply with the “Compact Disc Digital Audio”
standard. Therefore, the use of Non-DVD side
of a DualDisc on this product may not be
recommended.
Condensation : When the car is airconditioned, moisture may collect on the
laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the
moisture to evaporate.
Temperature inside the car : If you have
parked the car for a long time in hot or cold
weather, wait until the temperature in the car
becomes normal before operating the unit.
ENGLISH
EN02-19_KD-R521_003A_f.indd 2
10/13/10 12:45:32 PM
How to attach/detach the control
panel
CONTENTS
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
3 Maintenance
How to reset your unit
Your preset adjustments will
also be erased.
How to forcibly eject a disc
[Hold]
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
3
4
About discs
Canceling the display
demonstration
4 Setting the clock
5 Basic operations
6 Listening to the radio
8 Listening to a disc
9 Connecting the other external
components
9 Listening to the other external
components
10 Listening to a USB device
11 Listening to an iPod/iPhone
(Available for KD-R521)
Maintenance
Cleaning the unit
Wipe off the dirt on the panel with a dry silicon
or soft cloth. Failure to observe this precaution
may result in damage to the unit.
Cleaning the connector
Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.
12 Selecting a preset sound mode
13 Menu operations
15 Using the remote controller
(For KD-R521/KD-R422/KD-R421: optionally
purchased)
16 Troubleshooting
18 Using Bluetooth ® devices
19 Specifications
About discs
This unit can only play the CDs with:
Discs that cannot be used:
• Discs that are not round.
• Discs with coloring on the recording surface
or discs that are dirty.
• You cannot play a Recordable/ReWritable
disc that has not been finalized. (For the
finalization process refer to your disc writing
software, and your disc recorder instruction
manual.)
• 3-inch CD cannot be used. Attempt to insert
using an adapter can cause malfunction.
Handling discs:
• Do not touch the recording surface of the
disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move
outward.
• Clean the disc with a dry silicon or soft cloth.
Do not use any solvents.
• When removing discs from this unit, pull them
out horizontally.
• Remove the rims from the center hole and
disc edge before inserting a disc.
ENGLISH
EN02-19_KD-R521_003A_f.indd 3
3
10/13/10 12:45:33 PM
Canceling the display demonstration
Display demonstration will be activated automatically if no operation is done for about 20 seconds.
1 Turn on the power.
4 Select <DEMO OFF>.
[Hold]
2
5
[Hold]
(Initial setting)
6 Finish the procedure.
3
(Initial setting)
Setting the clock
1 Turn on the power.
6 Adjust the minute.
[Hold]
2
[Hold]
(Initial setting)
3 Select <CLOCK>.
7 Select <24H/12H>.
4 Select <CLOCK SET>.
8 Select <24 HOUR> or
<12 HOUR>.
5 Adjust the hour.
9 Finish the procedure.
(Initial setting)
4
ENGLISH
EN02-19_KD-R521_003A_f.indd 4
10/13/10 12:45:33 PM
Basic operations
Loading slot
Control dial
Display window
Remote sensor (for KD-R521/KD-R422/KD-R421)
You can control this unit with an optionally
purchased remote control, RM-RK52 (page 15, 16).
Detaches the panel
Ejects the disc
Front auxiliary
input jack
USB (Universal Serial
Bus) input terminal
When you press or hold the following button(s)...
Button
/ SOURCE
Control dial
(turn)
Control dial
(press)
EQ
BRIGHTNESS
T/P BACK
DISP
General operation
• Turns on/off [Hold].
• Selects the sources (FM, CD, USB or USB-IPOD, F-AUX, BT AUDIO or R-AUX or
BT PHONE, AM). “CD” or “USB” is selectable only when a disc is loaded or a USB
device is connected.
• Adjusts the volume level.
• Selects items.
• Mutes the sound during playback. If the source is “CD” or “USB/USB-IPOD”
playback pauses. Press the button again to cancel muting or resume playback.
• Confirms selection.
• Selects the sound mode.
• Enters tone level adjustment directly [Hold]. (page 12)
Enters <BRIGHTNESS> menu directly. (page 13)
• Activates/deactivates TA Standby Reception.
• Enters PTY Searching mode [Hold].
• KD-R521: Selects the controlling terminal of an iPod/iPhone [Hold]. (page 11)
• Returns to the previous menu.
• Exit from the menu [Hold].
• Changes the display information.
• Scrolls the display information [Hold].
KD-R521/KD-R422/KD-R421 is equipped with the steering wheel remote control function.
• For details, refer also to the instructions supplied with the remote adapter.
ENGLISH
EN02-19_KD-R521_003A_f.indd 5
5
10/13/10 12:45:34 PM
Listening to the radio
• [Press] Searches for stations automatically.
• [Hold] Searches for stations manually.
“M” flashes, then press the button
] “FM” or “AM”
repeatedly.
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
~
Ÿ
Improving the FM reception
1
[Hold]
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
1
2
] <TUNER> ] <MONO> ] <MONO ON>
Reception improves, but stereo effect
will be lost.
] Tune in to a station you want to
preset.
2
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
[Hold]
[Hold]
“PRESET MODE” flashes.
3
] Selects preset number.
Preset number flashes and “MEMORY”
appears.
Selecting a preset station
1
2
or
] <TUNER> ] <SSM> ]
<SSM 01 – 06 / 07 – 12 / 13 – 18>
“SSM” flashes and local stations with the
strongest signal are searched and stored
automatically.
To preset another 6 stations, repeat the
above procedure by selecting one of the other
SSM setting ranges.
6
2
Changing the display information (for nonRadio Data System station)
Frequency j Clock
ENGLISH
EN02-19_KD-R521_003A_f.indd 6
10/13/10 12:45:34 PM
The following features are available
only for FM Radio Data System stations.
Searching for your favourite
FM Radio Data System
programme—PTY Search
You can tune in to a station broadcasting your
favourite programme by searching for a PTY
code.
1
[Hold]
• To activate the reception, tune in to another
station providing Radio Data System signals
required for TA Standby Reception.
• To deactivate the reception, press T/P BACK
again.
NEWS Standby Reception
NEWS Standby Reception allows the unit to
switch temporarily to your NEWS programme
from any source other than AM.
To activate NEWS Standby Reception, see
<NEWS-STBY>. (page 14)
The last selected PTY code appears.
2
Tracing the same programme—
] Select one of your favourite
programme types or a PTY code, and
start searching.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
PTY codes: NEWS, AFFAIRS, INFO, SPORT,
EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music),
EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), WEATHER, FINANCE,
CHILDREN, SOCIAL, RELIGION, PHONE IN,
TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M (music), OLDIES, FOLK M (music),
DOCUMENT
Standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
any source other than AM.
To activate TA Standby Reception
If the TP indicator lights up, TA
Standby Reception is activated.
If the TP indicator flashes, TA
Standby Reception is not yet
activated.
Network-Tracking Reception
When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM Radio Data System
station of the same network, possibly
broadcasting the same programme with
stronger signals.
To change the Network-Tracking Reception
setting, see <AF-REG>. (page 14)
Automatic station selection—
Programme Search
Usually when you select a preset number, the
station preset in that number is tuned in.
If the signals from the FM Radio Data System
preset station are not sufficient for good
reception, this unit, using the AF data, tunes in
to another frequency possibly broadcasting the
same programme as the original preset station
is broadcasting.
To activate Programme Search, see
<P-SEARCH>. (page 14)
Changing the display information
Station name (PS) = Station
Frequency = Programme type
(PTY) = Clock = (back to the
beginning)
ENGLISH
EN02-19_KD-R521_003A_f.indd 7
7
10/13/10 12:45:34 PM
Listening to a disc
Playback starts automatically.
All tracks will be played repeatedly until you change the
source or eject the disc.
Stopping playback and ejecting
the disc
If the ejected disc is not
removed within 15 seconds, it
will automatically reload into
the loading slot.
Basic operations
Selecting a track/folder from the
list
• If the MP3/WMA disc contains many tracks,
you can fast search (±10, ±100) through the
disc by turning the control dial quickly.
• To return to the previous menu, press
T/P BACK.
Selects folder of the MP3/WMA.
Selecting the playback modes
[Press] Selects track.
[Hold] Fast-forwards
or reverses the track.
You can use only one of the following playback
modes at a time.
1
[Hold]
Changing the display information
2
Disc title/Album name/performer (folder
name)* = Track title (file name)* = Current
track number with the elapsed playing time =
Current track number with the clock time =
(back to the beginning)
* “NO NAME” appears for conventional CDs or if
not recorded.
] “REPEAT” j “RANDOM”
3
REPEAT
TRACK RPT : Repeats current track
FOLDER RPT : Repeats current folder
RANDOM
FOLDER RND : Randomly plays all tracks
of current folder, then
tracks of next folders
ALL RND
: Randomly plays all tracks
To cancel repeat play or random play, select
“RPT OFF” or “RND OFF.”
8
ENGLISH
EN02-19_KD-R521_003A_f.indd 8
10/13/10 4:16:29 PM
Connecting the other external components
You can connect an external component to the auxiliary input jack on the control panel (F-AUX)
and/or on the rear side of the unit (R-AUX).
Summary of using the external components through the auxiliary input jacks:
External component
Portable audio
player
Bluetooth device
Preparation
Connecting
Auxiliary
Source
cable/device
Menu setting Subinput jack
name
Setting
(not supplied)
item
item
Front
SRC SELECT F-AUX ON
F-AUX
See below.
Rear
SRC SELECT R-AUX ON
R-AUX
Rear
SRC SELECT R-AUX BT ADAPTER BT AUDIO/ KS-BTA100
BT PHONE * (page 18)
* ”BT PHONE” appears when a Bluetooth phone is in use.
On the control panel (F-AUX):
On the rear panel (R-AUX):
3.5 mm stereo mini plug
(with “L” shaped connector)
(not supplied)
3.5 mm stereo mini plug
(not supplied)
Portable audio player,
etc.
Portable audio player,
etc.
Recommended to use a 3-terminal plug head stereo mini plug for
optimum audio output.
Listening to the other external components
For details, refer also to the instructions supplied with the external components.
~
Ÿ
] “F-AUX” or “R-AUX”
Turn on the connected component and
start playing the source.
ENGLISH
EN02-19_KD-R521_003A_f.indd 9
9
10/13/10 12:45:35 PM
Listening to a USB device
You can operate the USB device in the same way you operate the files on a disc. (page 8)
• This unit can play MP3/WMA files stored in a USB mass storage class device (such as a USB
memory, Digital Audio Player, etc.).
~
[Hold]
Ÿ
] Turn on the power.
USB input terminal
USB cable (not supplied)
All tracks will be played repeatedly until you change the source or disconnect the USB
device.
Cautions:
• Make sure all important data has been backed
up.
• You cannot connect a computer or portable
HDD to the USB input terminal of the unit.
• Avoid using the USB device if it might hinder
your safety driving.
• Electrostatic shock at connecting a USB device
may cause abnormal playback of the device.
In this case, disconnect the USB device then
reset this unit and the USB device.
• Do not leave a USB device in the car, expose
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
• This unit may not play back files in a USB
device properly when using a USB extension
cord.
• USB devices equipped with special functions
such as data security functions cannot be
used with the unit.
• When connecting a USB cable, use the USB
2.0 cable.
• Do not use a USB device with 2 or more
partitions.
10
• Depending on the shape of the USB devices
and connection ports, some USB devices may
not be attached properly or the connection
might be loose.
• This unit cannot recognize a USB device
whose rating is other than 5 V and exceeds
500 mA.
• Do not pull out and attach the USB device
repeatedly while “READING” is shown on the
display.
• This unit may not recognize a memory card
inserted into the USB card reader.
• Connect only one USB device to the unit at a
time. Do not use a USB hub.
• Operation and power supply may not work as
intended for some USB devices.
• The maximum number of characters for:
– Folder names : 63 characters
– File names : 63 characters
– MP3 Tag : 60 characters
– WMA Tag : 60 characters
• This unit can recognize a total of 65 025 files,
255 folders (255 files per folder including
folder without unsupported files), and of 8
hierarchies.
ENGLISH
EN02-19_KD-R521_003A_f.indd 10
10/13/10 12:45:35 PM
Listening to an iPod/iPhone
Available for KD-R521
~
[Hold]
Ÿ
USB input terminal
] Turn on the power.
USB 2.0 cable (accessory of the iPod/iPhone)
Apple iPod/iPhone
All tracks will be played repeatedly until you change the source or disconnect the iPod/
iPhone.
Cautions:
Selecting a track from the menu
• Avoid using the iPod/iPhone if it might hinder
your safety driving.
• Make sure all important data has been backed
up to avoid losing the data.
Not applicable under <IPOD MODE / EXT MODE>.
Selecting the control terminal
1
2
] Select the desired menu.
PLAYLISTS j ARTISTS j ALBUMS
j SONGS j PODCASTS j GENRES
j COMPOSERS j (back to the
beginning)
[Hold]
] <HEAD MODE / IPOD MODE / EXT MODE>
• For details, see <IPOD SWITCH> setting on
page 15.
3
Basic operations
Not applicable under <EXT MODE>.
[Press] Selects track/
chapter.
[Hold] Fast-forwards or
reverses the track.
] Select the desired track.
Repeat this step until the desired track
is selected.
• If the selected menu contains many tracks,
you can fast search (±10, ±100, ±1 000,
±10 000) through the menu by turning the
control dial quickly.
• To return to the previous menu, press
T/P BACK.
Continued...
ENGLISH
11
EN02-19_KD-R521_003A_f.indd 11
10/13/10 12:45:35 PM
Selecting the playback modes
• You can use only one of the following
playback modes at a time.
• Not applicable under <IPOD MODE / EXT MODE>.
1
[Hold]
Changing the display information
Album name/performer = Track title =
Current track number with the elapsed playing
time = Current track number with the clock
time = (back to the beginning)
2
Additional information
] “REPEAT” j “RANDOM”
3
REPEAT
ONE RPT : Functions the same as
“Repeat One” of the iPod
ALL RPT : Functions the same as
“Repeat All” of the iPod
RANDOM
ALBUM RND : Functions the same as
“Shuffle Albums” of the iPod
SONG RND : Functions the same as
“Shuffle Songs” of the iPod
• To cancel random play, select “RND OFF.”
• “ALBUM RND” is not available for some iPod/
iPhone.
• To return to the previous menu, press
T/P BACK.
• Made for
iPod touch (1st, 2nd, and 3rd generation)
iPod classic
iPod with video *
iPod nano (1st *, 2nd, 3rd, 4th, and 5th generation)
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
* <IPOD MODE / EXT MODE> are not available.
• Update iPod/iPhone software to the latest version. For
details, visit <http://www.apple.com>.
• It is not possible to browse video files on the “Videos”
menu in <HEAD MODE>.
• The song order displayed on the selection menu of
this unit may differ from that of the iPod.
• When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In this
case, visit the following JVC web site: <http://www.
jvc.co.jp/english/car/> (English website only).
Selecting a preset sound mode
You can select a preset sound mode suitable
for the music genre.
FLAT = NATURAL = DYNAMIC = VOCAL
BOOST = BASS BOOST = USER = (back to
the beginning)
Adjust the level:
SUB.W *: 00 to 08
BASS/ MID/ TRE: –06 to +06
The sound mode is automatically stored
and changed to “USER.”
While listening, you can adjust the subwoofer
level and tone level of the selected sound mode.
* Subwoofer level is adjustable only when
<L/O MODE> is set to <SUB.W>. (page 14)
1
12
2
[Hold]
ENGLISH
EN02-19_KD-R521_003A_f.indd 12
10/13/10 12:45:35 PM
Storing your own sound mode
You can store your own adjustments in
memory.
1
3
[Hold]
4
2
] <PRO EQ> ] <BASS/ MIDDLE/ TREBLE>
Adjust the sound elements (see table
below) of the selected tone.
Repeat steps 2 and 3 to adjust other
tones.
The adjustments made is automatically
stored and changed to “USER.”
Frequency / Level / Q [Initial: Underlined]
60/ 80/ 100/ 200 Hz
–06 to +06 [ 00 ]
Q1.0/ 1.25/ 1.5/ 2.0
BASS
–06 to +06 [ 00 ]
Q0.75/ 1.0/ 1.25
MIDDLE 0.5/ 1.0/ 1.5/ 2.5 kHz
–06 to +06 [ 00 ]
Q FIX
TREBLE 10.0/ 12.5/ 15.0/ 17.5 kHz
Menu operations
1
2
[Hold]
If no operation is done
for about 60 seconds, the
operation will be canceled.
Menu item
CLOCK
DEMO
CLOCK SET
24H/12H
CLOCK ADJ *1
3
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
DISP or MENU.
Selectable setting, [Initial: Underlined]
For settings, see page 4.
For settings, see page 4.
For settings, see page 4.
AUTO : The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. / OFF : Cancels.
AUTO : Changes the display and button illumination between the Day/Night adjustments
in <BRIGHTNESS> setting when you turn off/on the car headlights *2. / ON : Selects the
Night adjustments in <BRIGHTNESS> setting for the display and button illumination. /
OFF : Selects the Day adjustments in <BRIGHTNESS> setting for the display and button
illumination.
BRIGHTNESS DAY [ 25 ] / NIGHT [ 11 ] : Selects the display and button illumination brightness level
[00 — 31] for day and night.
SCROLL *3
ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second
intervals). / OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the setting.)
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.
*1 Takes effect only when CT (clock time) data is received.
*2 The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting may not work
correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to
any other than <DIMMER AUTO>.
*3 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Continued...
ENGLISH
13
DISPLAY
DIMMER
DIMMER SET
EN02-19_KD-R521_003A_f.indd 13
10/13/10 12:45:36 PM
TUNER
AUDIO
Menu item
PRO EQ
FADER *4, *5
BALANCE *5
LOUD
Selectable setting, [Initial: Underlined]
For settings, see page 13.
R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.
L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.
ON : Boost low and high frequencies to produce a well-balanced sound at a low volume
level. / OFF : Cancels.
VOL ADJUST –05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except
“FM”), compared to the FM volume level. The volume level will automatically increase or
decrease when you change the source. Before adjustment, select the source you want to
adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)
L/O MODE *6 SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer (through
an external amplifier). / REAR : Selects if the REAR/SW terminals are used for connecting
the speakers (through an external amplifier).
SUB.W LPF *7 LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than
55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL *7 00 — 08 [ 04 ] : Adjusts the subwoofer output level.
HPF *6
ON : Activates the High Pass Filter. Low frequency signals are cut off from the front/rear
speakers. / OFF : Deactivates (all signals are sent to the front/rear speakers).
BEEP
ON / OFF : Activates or deactivates the keypress tone.
TEL MUTING *8 ON : Mutes the sounds while using the cellular phone (not connected through
KS-BTA100). / OFF : Cancels.
AMP GAIN *9 LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power
of each speaker is less than 50 W to prevent damaging the speakers.) /
HIGH POWER : VOLUME 00 – VOLUME 50
SSM
Displayed only when the source is “FM.” For settings, see page 6.
AF-REG *10
AF ON : When the currently received signals become weak, the unit switches to another
station (the programme may differ from the one currently received). (The AF indicator
lights up.) / AF-REG ON : When the currently received signals become weak, the
unit switches to another station broadcasting the same programme. (The AF and REG
indicators light up.) / OFF : Cancels.
NEWS-STBY *10 Displayed only when the source is “FM.” NEWS ON / NEWS OFF : Activates or
deactivates NEWS Standby Reception.
P-SEARCH *10 SEARCH ON / SEARCH OFF : Activates Programme Search (if AF-REG is turn on)
or deactivates.
MONO
Displayed only when the source is “FM.” For settings, see page 6.
IF BAND
AUTO : Increases the tuner selectivity to reduce interference noises between adjacent
stations. (Stereo effect may be lost.) / WIDE : Subject to interference noises from
adjacent stations, but sound quality will not be degraded and the stereo effect will remain.
*4
*5
*6
*7
*8
*9
If you are using a two-speaker system, set the fader level to “00.”
For KD-R521/KD-R422/KD-R421: This adjustment will not affect the subwoofer output.
For KD-R521/KD-R422/KD-R421.
For KD-R521/KD-R422/KD-R421: Displayed only when <L/O MODE> is set to <SUB.W>.
This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.
The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level set
higher than “VOLUME 30.”
*10 Only for FM Radio Data System stations.
14
ENGLISH
EN02-19_KD-R521_003A_f.indd 14
10/15/10 9:05:02 AM
Menu item
Selectable setting, [Initial: Underlined]
HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls
iPod playback through the iPod/iPhone. / EXT MODE : The sound of any functions
(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted
through the speakers connected to this unit. The display always show “EXT MODE.”
AM *12
ON / OFF : Enable or disable “AM” in source selection.
F-AUX *12
ON / OFF : Enable or disable “F-AUX” in source selection.
R-AUX *12
ON / OFF : Enable or disable “R-AUX” in source selection. / BT ADAPTER : Selects if
the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 9)
The source name changed to “BT AUDIO.”
For KD-R521: Displayed only when “USB-IPOD” is selected.
Displayed only when any source other than “AM/ F-AUX/ R-AUX/ BT AUDIO” is selected separately.
SRC SELECT
IPOD SWITCH *11
*11
*12
Using the remote controller
KD-R521/KD-R422/KD-R421 can be remotely controlled as instructed here (with an optionally
purchased remote controller). We recommend that you use remote controller RM-RK52 with your
unit.
Installing the lithium coin battery
(CR2025)
CR2025
Caution:
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
If the effectiveness of the remote controller
decreases, replace the battery.
Before using the remote controller:
• Aim the remote controller directly at the
remote sensor on the unit.
• DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
Remote sensor
EN02-19_KD-R521_003A_f.indd 15
1 • Mutes the sound during playback. If the
source is “CD” or “USB/USB-IPOD” playback
pauses. Press the button again to cancel
muting or resume playback.
2 • Changes the preset stations.
• Changes the folder of the MP3/WMA.
3 Adjusts the volume level.
4 Selects the sound mode.
5 Selects the source.
6 • [Press] Searches for stations automatically.
• [Hold] Searches for stations manually.
• [Hold] Fast-forwards or reverses the track.
• [Press] Changes the tracks/chapters.
Continued...
ENGLISH
15
10/13/10 12:45:36 PM
Warning (to prevent accidents and damage):
• Do not install any battery other than CR2025 or its equivalent.
• Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for
a long time.
• Store the battery in a place where children cannot reach.
• Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.
• Do not leave the battery with other metallic materials.
• Do not poke the battery with tweezers or similar tools.
• Wrap the battery with tape and insulate when throwing away or saving it.
Troubleshooting
MP3/WMA
playback
Disc playback
FM/AM
General
Symptom
Sound cannot be heard from the
speakers.
“MISWIRING CHK WIRING THEN RESET
UNIT” appears on the display and no
operations can be done.
16
Remedy/Cause
Adjust the volume to the optimum level. / Make sure the unit is not
muted/paused. (page 5) / Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered with
insulating tape properly, then reset the unit. (page 3)
If the message does not disappear, consult your JVC IN-CAR
ENTERTAINMENT dealer or a company supplying kits.
The unit does not work at all.
Reset the unit. (page 3)
“F-AUX” or “R-AUX” cannot be selected. Check the <SRC SELECT> = <F-AUX / R-AUX> setting. (page 15)
Sound is sometimes interrupted while Check to be sure the recommended stereo mini plug is used for
connection. (page 9)
listening to an external component
connected to the auxiliary input jack.
The correct characters are not displayed This unit can only display letters (upper case), numbers, and a
(e.g. album name).
limited number of symbols.
SSM automatic presetting does not
Store stations manually.
work.
Static noise while listening to the radio. Connect the aerial firmly.
“AM” cannot be selected.
Check the <SRC SELECT> = <AM> setting. (page 15)
Disc cannot be played back.
Insert the disc correctly.
CD-R/CD-RW cannot be played back
Insert a finalized CD-R/CD-RW (finalize with the component which
and track cannot be skipped.
you used for recording).
Disc sound is sometimes interrupted.
Stop playback while driving on rough roads. / Change the disc. /
Check the cords and connections.
“NO DISC” appears on the display.
Insert a playable disc into the loading slot.
Press 0, then insert a disc correctly.
“PLEASE” and “EJECT“ appear
alternately on the display.
“IN DISC” appears on the display.
The disc cannot be ejected properly. Make sure nothing is blocking
the loading slot.
Disc cannot be played back.
Use a disc with MP3/WMA tracks recorded in a format compliant
with ISO 9660 Level 1, Level 2, Romeo, or Joliet. / Add the extension
code <.mp3> or <.wma> to the file names.
Noise is generated.
Skip to another track or change the disc.
“READING” keeps flashing on the
A longer readout time is required. Do not use too many hierarchical
display.
levels and folders.
ENGLISH
EN02-19_KD-R521_003A_f.indd 16
10/13/10 12:45:36 PM
MP3/WMA
playback
USB playback
iPod/iPhone playback
(For KD-R521)
Symptom
Tracks do not play back in the order you
have intended them to play.
The elapsed playing time is not correct.
Remedy/Cause
The playback order is determined when the files are recorded.
This sometimes occurs during playback. This is caused by how the
tracks are recorded on the disc.
“READING” keeps flashing on the
A longer readout time is required. Do not use too many hierarchical
display.
levels and folders. / Turn off the power then on again. / Reattach
the USB device again.
“NO FILE” appears on the display.
Check whether the device contains playable files.
Noise is generated.
Skip to another file.
“NOT SUPPORT” appears and track skips. Check whether the track is a playable file format.
Tracks/folders are not played back in the The playback order is determined by the file name. Folders with
order you have intended.
numbers on the initial of their names are sorted in numerical order.
However, folders with no numbers on the initial of their names are
sorted according to the file system of the USB device.
“CANNOT PLAY” flashes on the display. / Check whether the connected USB device is compatible with this
“NO USB” appears on the display. / The unit. / Reattach the USB device again.
unit cannot detect the USB device.
While playing a track, sound is
The tracks have not been properly copied into the USB device. Copy
sometimes interrupted.
tracks again into the USB device, and try again.
The iPod does not turn on or does not
Check the connecting cable and its connection. / Update the
work.
firmware version of the iPod/iPhone. / Charge the battery of
the iPod/iPhone. / Reset the iPod/iPhone. / Check whether
<IPOD SWITCH> setting is appropriate. (page 15)
The sound is distorted.
Deactivate the equalizer either on this unit or the iPod/iPhone.
Noise is generated.
Turn off (uncheck) the “VoiceOver” feature of the iPod. For details,
visit <http://www.apple.com>.
Playback stops.
The headphones are disconnected during playback. Restart the
playback operation. (page 11)
“NO FILE” appears on the display.
Check whether the device contains playable files.
“CANNOT PLAY” flashes on the display. Check whether the connected iPod/iPhone is compatible with this
unit. (page 12)
Additional information
• This unit can play back multi-session discs; however,
unclosed sessions will be skipped while playing.
• This unit can play back files with the extension code
<.mp3> or <.wma> (regardless of the letter
case—upper/lower).
• This unit can play back the files meeting the conditions
below:
– Bit rate: MP3/WMA: 8 kbps — 320 kbps
– Sampling frequency:
MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
WMA: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz
• This unit can show WMA Tag and ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3).
• The search function works but search speed is not
constant.
• This unit can play back files recorded in VBR (variable
bit rate). (Files recorded in VBR have a discrepancy in
elapsed time indication.)
• The maximum number of characters for file/folder
names vary depending on the disc format used (includes
4 extension characters—<.mp3> or <.wma>).
ISO 9660 Level 1 and 2, Romeo: 64 characters, Joliet:
32 characters, Windows long file name: 64 characters
• This unit cannot play back the following files:
– MP3 files: encoded in MP3i and MP3 PRO format; an
inappropriate format; layer 1/2.
– WMA files: encoded in lossless, professional, and
voice format; not based upon Windows Media®
Audio; copy-protected with DRM.
– Files which have data such as AIFF, ATRAC3, etc.
ENGLISH
EN02-19_KD-R521_003A_f.indd 17
17
10/14/10 10:06:24 AM
Using Bluetooth ® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied)
to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 9)
• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth
device.
• Operations may be different according to the connected device.
Preparation
1 Register (pair) a Bluetooth device with KS-BTA100.
Refer to the instructions manual supplied with KS-BTA100.
2 Change the <SRC SELECT> settings of this unit.
] <SRC SELECT> ] <R-AUX> ]
<BT ADAPTER>
[Hold]
Using the Bluetooth mobile phone
(Low)
(High)
Adjusting the microphone volume
Volume level: High/ Normal (initial)/ Low
• Receiving a call
When a call comes in...
• Making a call
Making a call to the last connected number from
your phone.
• Switching between handsfree and phone
While talking...
KS-BTA100
Microphone
• Ends/rejects call
• Voice dialing
Voice dialing is available only when the connected
mobile phone has the voice recognition system.
[Hold]
Using the Bluetooth audio device
1
(CD receiver)
] “BT AUDIO”
2
If playback does not start, operate the Bluetooth audio player to start playback.
[Press] Selects track.
[Hold] Fast-forwards or reverses the track.
About microphone volume:
• When you turn off the power of the CD receiver, the volume level changes to Normal.
18
ENGLISH
EN02-19_KD-R521_003A_f.indd 18
10/13/10 12:45:36 PM
Specifications
AUDIO AMPLIFIER SECTION
USB SECTION
Maximum Power Output :
Front/Rear : 50 W per channel
Continuous Power Output (RMS) :
Front/Rear : 20 W per channel into 4 Ω,
40 Hz to 20 000 Hz at no more than 1% total
harmonic distortion.
Load Impedance : 4 Ω (4 Ω to 8 Ω allowance)
Frequency Response : 40 Hz to 20 000 Hz
Signal-to-Noise Ratio : 70 dB
Line-Out or Subwoofer-Out Level/Impedance
(for KD-R521/KD-R422/KD-R421) :
2.5 V/20 kΩ load (full scale)
Output Impedance : ≤ 600 Ω
Other Terminal : USB input terminal, Front
auxiliary input jack, Rear auxiliary/Bluetooth
adapter input jack, Aerial input
USB Standard : USB 1.1, USB 2.0
Data Transfer Rate (Full Speed) : Max. 12 Mbps
Compatible Device : Mass Storage Class
Compatible File System : FAT 32/16/12
Playable Audio Format : MP3/WMA
Max. Current : DC 5 V 500 mA
TUNER SECTION
Frequency Range :
FM : 87.5 MHz to 108.0 MHz
AM : MW : 531 kHz to 1 611 kHz
LW : 153 kHz to 279 kHz
FM Tuner :
Usable Sensitivity : 9.3 dBf (0.8 μV/75 Ω)
50 dB Quieting Sensitivity : 16.3 dBf
(1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz) :
65 dB
Frequency Response : 40 Hz to 15 000 Hz
Stereo Separation: 40 dB
MW Tuner :
Sensitivity/Selectivity : 20 μV/40 dB
LW Tuner :
Sensitivity : 50 μV
CD PLAYER SECTION
Type : Compact disc player
Signal Detection System : Non-contact optical
pickup (semiconductor laser)
Number of Channels : 2 channels (stereo)
Frequency Response : 5 Hz to 20 000 Hz
Signal-to-Noise Ratio : 98 dB
Wow and Flutter : Less than measurable limit
MP3 Decoding Format (MPEG1/2 Audio
Layer 3) : Max. Bit Rate: 320 kbps
WMA (Windows Media® Audio) Decoding
Format : Max. Bit Rate: 192 kbps
GENERAL
Power Requirement : Operating Voltage :
DC 14.4 V (11 V to 16 V allowance)
Grounding System : Negative ground
Allowable Operating Temperature :
0°C to +40°C
Dimensions (W × H × D) : (approx.)
– Installation Size :
182 mm × 52 mm × 159 mm
– Panel Size :
188 mm × 59 mm × 9 mm
Mass : 1.2 kg (excluding accessories)
Subject to change without notice.
Microsoft and Windows Media are either
registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
KD-R521:
• “Made for iPod,” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically
to iPod, or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, or iPhone may affect
wireless performance.
• iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
ENGLISH
EN02-19_KD-R521_003A_f.indd 19
19
10/13/10 4:44:06 PM
Merci pour avoir acheté un produit JVC.
Veuillez lire attentivement toutes les instructions avant d’utiliser l’appareil afin de bien comprendre
son fonctionnement et d’obtenir les meilleures performances possibles.
IMPORTANT POUR PRODUITS LASER
1. PRODUIT LASER CLASSE 1
2. ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune pièce réparable par l’utilisateur à
l’intérieur de l’appareil; confiez toute réparation à un personnel qualifié.
3. ATTENTION: Rayonnement laser visible et/ou invisible de classe 1M une fois ouvert. Ne pas
regarder directement avec des instruments optiques.
4. REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE DE PRÉCAUTION PLACÉE À L’EXTÉRIEUR DE L’APPAREIL.
AVERTISSEMENT:
Arrêtez la voiture avant de manipuler l’appareil.
Attention:
Pile
Produits
Informations relatives à l’élimination
des appareils et des piles usagés, à
l’intention des utilisateurs
[Union européenne seulement]
Ces symboles signifient que le produit et les
piles ne doivent pas être éliminés en tant
que déchet ménager à la fin de son cycle
de vie.
Si vous souhaitez éliminer ce produit et les
piles, faites-le conformément à la législation
nationale ou autres règles en vigueur dans
votre pays et votre municipalité.
En éliminant correctement ce produit, vous
contribuez à la conservation des ressources
naturelles et à la prévention des éventuels
effets négatifs sur l’environnement et la
santé humaine.
Notification:
La marque Pb en dessous du symbole des
piles indique que cette pile contient du
plomb.
JVC ne peut être tenu responsable pour toute
perte de données dans un iPod/iPhone et/
ou un périphérique USB à mémoire de grande
capacité lors de l’utilisation de ce système.
2
Ajustez le volume de façon à pouvoir entendre
les sons extérieurs à la voiture. Conduire avec
le volume trop haut peut être la cause d’un
accident.
Précautions sur le réglage du volume:
Les appareils numériques (CD/USB) produisent
très peut de bruit par rapport aux autres
sources. Réduisez le volume avant de
reproduire ces sources numériques afin d’éviter
d’endommager les enceintes par la soudaine
augmentation du niveau de sortie.
Précautions pour la lecture de disques à
double face:
La face non DVD d’un disque à “DualDisc” n’est
pas compatible avec le standard “Compact Disc
Digital Audio”. Par conséquent, l’utilisation de la
face non DVD d’un disque à double face sur cet
appareil n’est pas recommandée.
Condensation : Quand une voiture est
climatisée, de la condensation peut se
produire sur la lentille du laser. Cela peut être
la cause d’une erreur de lecture du disque.
Dans ce cas, retirez le disque et attendez que
l’humidité s’évapore.
Température à l’intérieur de la voiture :
Si votre voiture est restée garée pendant
longtemps dans un climat chaud ou froid,
attendez que la température à l’intérieur de
la voiture redevienne normale avant d’utiliser
l’appareil.
FRANÇAIS
FR02-19_KD-R521[E_EU]1.indd 2
9/24/10 10:00:33 AM
Comment attacher/détacher le
panneau de commande
TABLE DES MATIERES
3 Comment attacher/détacher le
panneau de commande
3 Comment réinitialiser votre appareil
3 Comment forcer l’éjection d’un disque
3 Entretien
Comment réinitialiser votre appareil
Vos ajustements préréglés
sont aussi effacés.
Comment forcer l’éjection d’un
disque
[Maintenez pressée]
• Faites attention de ne pas faire tomber le
disque quand il est éjecté.
• Si cela ne fonctionne pas, essayez de
réinitialiser l’autoradio.
Entretien
Nettoyage de l’appareil
Essuyez la saleté sur le panneau avec un chiffon
sec au silicone ou un chiffon doux. Ne pas
respecter ces précautions peut entraîner des
dommages à l'appareil.
Nettoyage du connecteur
Essuyez toute les saletés sur le connecteur de
l’appareil et le panneau. Utilisez une coton-tige
ou un chiffon.
3
4
À propos des disques
Annulation des démonstrations des
affichages
4 Réglage de l’horloge
5 Opérations de base
6 Écoute de la radio
8 Écoute d’un disque
9 Connexion d’autres appareils
extérieurs
9 Écoute d’un autre appareil extérieur
10 Écoute d’un périphérique USB
11 Écoute d’un iPod/iPhone
(Disponible pour le KD-R521)
12 Sélection d’un mode sonore préréglé
13 Utilisation des menus
15 Utilisation de la télécommande
(Pour le KD-R521/KD-R422/KD-R421: vendu en option)
16 Guide de dépannage
18 Utilisation de périphériques
Bluetooth ®
19 Spécifications
À propos des disques
Cet appareil ne peut lire que les CD comportant:
Disques qui ne peuvent pas être utilisés:
• Disques qui ne sont pas ronds
• Disques avec des colorations sur la surface
d’enregistrement ou disques sales
• Vous ne pouvez pas reproduire un disque
enregistrable/réinscriptible qui n’a pas été finalisé.
(Pour le processus de finalisation, reportez-vous
au logiciel utilisé pour graver le disque et au
mode d’emploi du graveur de disque.)
• Les CD de 3 pouces ne peuvent pas être
utilisés. Essayer d’insérer un disque à l’aide d’un
adaptateur peut entraîner un dysfonctionnement
de l’appareil.
FR02-19_KD-R521[E_EU]1.indd 3
Manipulation des disques:
• Ne pas toucher la surface d’enregistrement du
disque.
• Ne pas coller de ruban adhésif, etc. sur les disques
et ne pas utiliser de disque avec du ruban adhésif
collé dessus.
• N’utilisez aucun accessoire pour le disque.
• Nettoyez le disque en partant du centre vers
l’extérieur.
• Nettoyez le disque avec un chiffon sec au silicone
ou un chiffon doux. N’utilisez aucun solvant.
• Pour retirer les disques de cet appareil, tirez-les
horizontalement.
• Retirez les ébarbures du bord du trou central du
disque avant d’insérer un disque.
FRANÇAIS
3
10/8/10 4:00:31 PM
Download PDF

advertising