AEG A81000TNW0 User manual

AEG A81000TNW0 User manual
A81000TNW0
EN User manual
2
www.aeg.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
NOISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INSTRUCTIONS
In the interest of your safety and to ensure the correct use, before installing
and first using the appliance, read this
user manual carefully, including its hints
and warnings. To avoid unnecessary mistakes and accidents, it is important to
ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these
instructions and make sure that they remain with the appliance if it is moved or
sold, so that everyone using it through
its life will be properly informed on appliance use and safety.
For the safety of life and property keep
the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.
1.1 Children and vulnerable
people safety
• This appliance is not intended for use
by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from
children. There is risk of suffocation.
• If you are discarding the appliance
pull the plug out of the socket, cut the
connection cable (as close to the appliance as you can) and remove the
door to prevent playing children to
suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic
door seals is to replace an older appliance having a spring lock (latch) on
the door or lid, be sure to make that
spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for
a child.
1.2 General safety
WARNING!
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• The appliance is intended for keeping
foodstuff and/or beverages in a normal household and similar applications such as:
– staff kitchen areas in shops, offices
and other working environments;
– farm houses and by clients in hotels,
motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
• Do not use a mechanical device or any
artificial means to speed up the thawing process.
• Do not use other electrical appliances
(such as ice cream makers) inside of
refrigerating appliances, unless they
are approved for this purpose by the
manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is
contained within the refrigerant circuit
of the appliance, a natural gas with a
high level of environmental compatibility, which is nevertheless flammable.
During transportation and installation
of the appliance, be certain that none
of the components of the refrigerant
circuit become damaged.
If the refrigerant circuit should become damaged:
– avoid open flames and sources of
ignition
– thoroughly ventilate the room in
which the appliance is situated
• It is dangerous to alter the specifications or modify this product in any
way. Any damage to the cord may
cause a short-circuit, fire and/or electric shock.
4
www.aeg.com
WARNING!
Any electrical component (power
cord, plug, compressor) must be
replaced by a certified service
agent or qualified service personnel to avoid hazard.
1.
•
•
•
•
Power cord must not be lengthened.
2. Make sure that the power plug is
not squashed or damaged by the
back of the appliance. A squashed
or damaged power plug may
overheat and cause a fire.
3. Make sure that you can come to
the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose,
do not insert the power plug.
There is a risk of electric shock or
fire.
6. You must not operate the appliance without the lamp cover (if
foreseen) of interior lighting.
This appliance is heavy. Care should
be taken when moving it.
Do not remove nor touch items from
the freezer compartment if your hands
are damp/wet, as this could cause skin
abrasions or frost/freezer burns.
Avoid prolonged exposure of the appliance to direct sunlight.
Bulb lamps (if foreseen) used in this
appliance are special purpose lamps
selected for household appliances use
only. They are not suitable for household room illumination.
WARNING!
Do not place frozen food on the
worktop since cold and vapour
may produce water condensate
within its inner side. The resulting
drip liquid may cause malfunctions. Therefore, do not place
nor leave frozen items of any
kind on the worktop.
1.3 Daily Use
• Do not put hot pot on the plastic parts
in the appliance.
• Do not store flammable gas and liquid
in the appliance, because they may
explode.
• Do not place food products directly
against the air outlet on the rear wall.
(If the appliance is Frost Free)
• Frozen food must not be re-frozen
once it has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacturer's instructions.
• Appliance's manufacturers storage
recommendations should be strictly
adhered to. Refer to relevant instructions.
• Do not place carbonated or fizzy
drinks in the freezer compartment as it
creates pressure on the container,
which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed straight from the appliance.
1.4 Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug
from the mains socket.
• Do not clean the appliance with metal
objects.
• Do not use sharp objects to remove
frost from the appliance. Use a plastic
scraper.
• Never use a hair drier or other heating
appliances to speed up defrosting. Excessive heat may damage the plastic
interior, and humidity could enter the
electric system making it live.
1.5 Installation
For electrical connection carefully follow the instructions given in
specific paragraphs.
• Unpack the appliance and check if
there are damages on it. Do not connect the appliance if it is damaged.
Report possible damages immediately
to the place you bought it. In that case
retain packing.
• It is advisable to wait at least four
hours before connecting the appliance to allow the oil to flow back in
the compressor.
• Adequate air circulation should be
around the appliance, lacking this
leads to overheating. To achieve suffi-
ENGLISH
•
•
•
•
cient ventilation follow the instructions
relevant to installation.
Wherever possible the back of the
product should be against a wall to
avoid touching or catching warm parts
(compressor, condenser) to prevent
possible burn.
The appliance must not be located
close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the appliance.
Connect to potable water supply only
(If a water connection is foreseen).
1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
5
1.7 Environment Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refrigerant circuit or insulation materials.
The appliance shall not be discarded together with the urban
refuse and rubbish. The insulation foam contains flammable
gases: the appliance shall be disposed according to the applicable regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, especially at the rear near the heat exchanger. The materials used on
this appliance marked by the
are recyclable.
symbol
2. CONTROL PANEL
1
2
3
4
1 Green ON/OFF Indicator Light
2 ON/OFF Button
3 Temperature Regulator Button (for
higher temperatures)
4 Display (shows the set temperature)
5 Temperature Regulator Button (for
lower temperatures)
6 Red ALARM Indicator Light
7 ALARM STOP Button
8 Yellow SUPER function Indicator
Light
9 SUPER Button
5
6
7
8
9
2.1 Switching on
• Allow the appliance to stand for 4 hrs
after installation.
• Insert the plug into the wall socket.
• Press the ON/OFF Button (not necessary to press at the first switching on).
• The Green ON/OFF Indicator Light
will light up continuously.
• The lighting up of the Green ON/OFF
Indicator Light means that the appliance is switched on.
• The blinking of the Red ALARM Indicator Light and the Acoustic Alarm
means an improper temperature in
the freezer.
6
www.aeg.com
• To switch off the Acoustic Alarm and
the Temperature Display flashing,
press ALARM STOP Acoustic Alarm
OFF Button.
• When switching on the freezer for the
first time, the Red ALARM Indicator
Light will blink until the internal temperature has reached a level required
for the safe conservation of frozen
food.
If the ALARM STOP button is not
pressed then the acoustic alarm
will break off after approx. one
hour. The Red ALARM Indicator
Light will continue to flash. Press
the ALARM STOP button.
2.2 Switching off
• Press the ON/OFF Button for appr. 3
seconds.
• The Green ON/OFF Indicator Light
and the Display switches off.
• To disconnect the appliance from the
power disconnect the mains plug from
the wall socket.
2.3 Temperature regulation
The set temperature of the freezer may
be adjusted by pressing the Temperature Regulator Buttons.
Set default temperature -18 °C, it is optimal for food storage.
The Display shows the set temperature.
The set temperature will be reached
within 24 hours.
Fluctuations of some degrees around set
temperature are normal and does not
mean any fault in the appliance.
After a power failure the set temperature remains stored.
2.4 Red ALARM Indicator
Light
Under normal operating conditions, the
internal temperature of the freezer will
ensure the long-term conservation of the
stored food.
When such temperature rises above a
certain level (-12 °C, for example due to
an earlier power failure), the appliance
will trigger an acoustic and light alarm.
The light alarm is a blink red light (Red
ALARM Indicator Light), while the acoustic alarm is an intermittent sound.
• You can stop the acoustic alarm by
pressing the ALARM STOP Button.
• The acoustic alarm switches off.
• The freezer Display shows the highest
temperature reached for a few seconds. Then show again the set temperature.
The Red ALARM Indicator Light
continues to flash until the internal temperature has reached a
level required for the safe conservation of frozen food.
2.5 Quick Freeze
FROSTMATIC function
If more than 3-4 kg of food is to be frozen:
1. Press the SUPER Quick Freeze Button for 2-3 seconds to activate the
FROSTMATIC function 6-24 hours
before placing the fresh food in the
freezer, the Yellow SUPER Indicator
Light will illuminate. The compressor
will now run continuously, to ensure
that the fresh food is frozen as quickly as possible.
2. It is possible to deactivate the function at any time by pressing the SUPER Quick Freeze Button.
3. Place the food in the freezing compartment or compartments (indicated with graphics) and leave the
FROSTMATIC function for a further
24 hours.
4. Then push the SUPER Quick Freeze
Button again (the Yellow SUPER Indicator Light will go out).
5. Move frozen food from the freezing
compartments into the other compartments (storing compartments) to
make room for another freezing.
If the SUPER Quick Freeze Button is accidentally left on, the
freezer will not be damaged, but
energy will be wasted and it will
be automatically switched off 52
hours later. The SUPER Indicator
Light will also go out.
ENGLISH
7
3. FIRST USE
3.1 Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
4. DAILY USE
4.1 Freezing fresh food
The freezer compartments (indicated
with graphics) are suitable for freezing
fresh food and storing frozen and deepfrozen food for a long time.
To freeze fresh food activate the SUPER
Quick Freeze function.
The maximum amount of food that can
be frozen in 24 hours is specified on the
rating plate, a label located on the inside of the appliance.
The freezing process lasts 24 hours: during this period do not add other food to
be frozen.
4.2 Storage of frozen food
When first starting-up or after a period
out of use, before putting the products
in the compartment let the appliance run
at least 2 hours on the higher settings.
In the event of accidental defrosting, for example due to a
power failure, if the power has
been off for longer than the value shown in the technical characteristics chart under "rising
time", the defrosted food must
be consumed quickly or cooked
immediately and then re-frozen
(after cooling).
4.3 Thawing
Deep-frozen or frozen food, prior to being used, can be thawed at room temperature.
Small pieces may even be cooked still
frozen, directly from the freezer: in this
case, cooking will take longer.
5. HELPFUL HINTS AND TIPS
5.1 Normal Operating Sounds
• You may hear a faint gurgling and a
bubbling sound when the refrigerant
is pumped through the coils or tubing.
This is correct.
• When the compressor is on, the refrigerant is being pumped around and
you will hear a whirring sound and a
pulsating noise from the compressor.
This is correct.
• The thermic dilatation might cause a
sudden cracking noise. It is natural,
not dangerous physical phenomenon.
This is correct.
• When the compressor switches on or
switches off, you will hear a faint
"click" of the temperature regulator.
This is correct.
5.2 Hints for freezing
To help you make the most of the freezing process, here are some important
hints:
• the maximum quantity of food which
can be frozen in 24 hrs. is shown on
the rating plate;
8
www.aeg.com
• the freezing process takes 24 hours.
No further food to be frozen should
be added during this period;
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
• prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required;
• wrap up the food in aluminium foil or
polythene and make sure that the
packages are airtight;
• do not allow fresh, unfrozen food to
touch food which is already frozen,
thus avoiding a rise in temperature of
the latter;
• lean foods store better and longer
than fatty ones; salt reduces the storage life of food;
• water ices, if consumed immediately
after removal from the freezer compartment, can possibly cause the skin
to be freeze burnt;
• it is advisable to show the freezing in
date on each individual pack to enable
you to keep tab of the storage time.
5.3 Hints for storage of frozen
food
To obtain the best performance from
this appliance, you should:
• make sure that the commercially frozen foodstuffs were adequately stored
by the retailer;
• be sure that frozen foodstuffs are
transferred from the foodstore to the
freezer in the shortest possible time;
• not open the door frequently or leave
it open longer than absolutely necessary;
• once defrosted, food deteriorates rapidly and cannot be refrozen;
• do not exceed the storage period indicated by the food manufacturer.
6. CARE AND CLEANING
CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must
therefore only be carried out by
authorized technicians.
6.1 Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with
lukewarm water and some neutral
soap.
• regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
• rinse and dry thoroughly.
Do not pull, move or damage
any pipes and/or cables inside
the cabinet.
Never use detergents, abrasive
powders, highly perfumed cleaning products or wax polishes to
clean the interior as this will damage the surface and leave a
strong odour.
Clean the condenser (black grill) and the
compressor at the back of the appliance
with a brush. This operation will improve
the performance of the appliance and
save electricity consumption.
Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/
damage the plastics used in this appliance. For this reason it is recommended
that the outer casing of this appliance is
only cleaned with warm water with a little
washing-up liquid added.
ENGLISH
After cleaning, reconnect the equipment
to the mains supply.
6.2 Defrosting of the freezer
The freezer compartment of this model,
on the other hand, is a "no frost" type.
This means that there is no buildup of
frost when it is in operation, neither on
the internal walls nor on the foods.
The absence of frost is due to the continuous circulation of cold air inside the
compartment, driven by an automatically
controlled fan.
6.3 No-Frost technology
In order to facilitate the removal of the
ice layer, the evaporator is assisted by
electric heating during the defrosting
procedure. The ventilator is in OFF position. The defrost water will drip in the
tray placed at the compressor and will
evaporate. In the course of the defrosting procedure (approx. 30 minutes) the
evaporator becomes warm but it has no
influence on the internal temperature.
9
The foods should be kept well-packed in
order to avoid any moisture loss as a result of air circulation.
Do not obstruct the vent holes.
It is recommended to put all foods in the
baskets in the freezer compartment.
6.4 Periods of non-operation
When the appliance is not in use for
long periods, take the following precautions:
1. disconnect the appliance from electricity supply
2. remove all food
3. clean the appliance and all accessories
4. leave the lid open to prevent unpleasant smells.
If the cabinet will be kept on, ask
somebody to check it once in a
while to prevent the food inside
from spoiling in case of a power
failure.
7. WHAT TO DO IF…
WARNING!
Before troubleshooting, disconnect the mains plug from the
mains socket.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
The appliance operates discontinuously, so the stopping of
compressor does not mean being no current. That is why you
must not touch the electrical
parts of the appliance before
breaking the circuit.
There are some sounds during
normal use (compressor, refrigerant circulation).
Problem
Possible cause
Solution
The appliance is
noisy
The appliance is not supported properly
Check if the appliance
stands stable (all the four
feet should be on the
floor)
The compressor operates continually
The thermostatic control
is set incorrectly
Set a warmer temperature
Doors are not shut prop- Check if the doors close
erly or do not close tightly well and the gaskets are
undamaged and clean
10 www.aeg.com
Problem
There is too much
frost and ice
Possible cause
Solution
The door has been
opened too frequently
Do not leave the door
open longer than necessary
Large quantities of food
to be frozen were put in
at the same time
Wait some hours and then
check the temperature
again
Food placed in the appliance was too warm
Allow food to cool to room
temperature before storing
The room temperature is
too high.
Decrease the room temperature.
Products are not wrapped Wrap the products better
properly
Doors are not shut prop- Check if the doors close
erly or do not close tightly well and the gaskets are
undamaged and clean
The Temperature regulator may be set incorrectly
Set a warmer temperature
Temperature regulator
may be set incorrectly
Set a lower temperature
The door does not close
tightly or it is not shut
properly
Check if the door closes
well and the gasket is undamaged and clean
Large quantities of food
to be frozen were put in
at the same time
Insert smaller quantities of
food to be frozen at any
one time.
Food placed in the appliance was too warm
Allow food to cool to room
temperature before storing.
Products to be frozen are
placed too closely to
each other
Place the products in a way
so that cold air could circulate among them
It is too cold inside
the freezer
Temperature regulator
may be set incorrectly
Set a warmer temperature
The appliance does
not work at all. Neither cooling nor
lighting works
Plug is not connected to
Connect the mains plug
the mains socket properly properly
It is too warm in the
freezer
Power does not reach the
appliance
Try connecting another
electrical device to the
power outlet
The appliance is not
switched on
Switch on the appliance
ENGLISH
Problem
The appliance does
not cool at all
Possible cause
Solution
There is no voltage in the
mains socket (try to connect another appliance
into it)
Call an electrician
Plug is not connected to
Connect the mains plug
the mains socket properly properly
There is no voltage in the
mains socket (try to connect another appliance
into it)
Call an electrician
The appliance is not
switched on
Switch on the appliance
A rectangular symTemperature sensor
bol is shown on the
problem
right side of the
Temperature Display
3.
7.1 Closing the door
1.
2.
11
Clean the door gaskets.
If necessary, adjust the door. Refer
to "Installation".
Call the service personnel
If necessary, replace the defective
door gaskets. Contact the Service
Center.
8. TECHNICAL DATA
Dimension
Height
850 mm
Width
595 mm
Depth
635 mm
Rising Time
13 h
Voltage
230-240 V
Frequency
50 Hz
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
12 www.aeg.com
9. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and correct operation of the appliance
before installing the appliance.
the climate class indicated on the rating
plate of the appliance:
Climate
class
Ambient temperature
9.1 Positioning
SN
+10°C to + 32°C
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar)
also, but for optimum performance install this appliance at a location where
the ambient temperature corresponds to
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
9.2 Levelling
When placing the appliance ensure that
it stands level. This can be achieved by
two adjustable feet at the bottom in
front.
ENGLISH
13
9.3 Location
100 mm
15 mm
15 mm
The appliance should be installed well
away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure
that air can circulate freely around the
back of the cabinet.To ensure best performance, if the appliance is positioned
below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100
mm . Ideally, however, the appliance
should not be positioned below overhanging wall units. Accurate levelling is ensured
by one or more adjustable feet at the base
of the cabinet. If the cabinet is placed in a
corner and the side with the hinges facing
the wall, the distance between the wall
and the cabinet must be at least 10 mm to
allow the door to open enough so that the
shelves can be removed.
WARNING!
It must be possible to disconnect
the appliance from the mains power supply; the plug must therefore
be easily accessible after installation.
9.4 Door reversibility
To carry out the following operations, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the operations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power
socket.
• Tilt back the appliance carefully so
that the compressor cannot touch the
floor.
• Unscrew the left foot.
• Unscrew the screws of the door bottom hinge.
14 www.aeg.com
• Take off the appliance door by pulling
it slightly downwards.
• Unscrew the top door hinge pin of the
appliance then screw it back on the
other side.
• Fit the appliance door on the upper
door hinge pin.
• Remove the lower hinge. Put over the
pin in the direction of the arrow.
• Unscrew and install the screw on the
opposite side.
• Install the lower hinge on the opposite
side leaving the position of the door
unchanged.
• Screw in the one screw in the place set
free on the other side as well as the
right adjustable foot .
2
1
4
1
2
3
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact
the nearest After Sales Service Force.
The After Sales Service specialist will carry out the reversibility of the doors at
your cost.
9.5 Electrical Connection
CAUTION!
Any electrical work required to
install this appliance should be
carried out by a qualified electrician or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
• Remove and install the handle (if foreseen) on the opposite side.
• Reposition, level the appliance, wait
for at least four hours and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
ENGLISH
A
B
C
E
D
The wires in the mains lead are
coloured in accordance with the
following code:
A Green and Yellow:
Earth
C Brown:
Live
E Blue:
Neutral
15
1.
Connect the wire coloured green
and yellow to the terminal marked
either with the letter “E“ or by the
or coloured green
earth symbol
and yellow.
2. Connect the wire coloured blue to
the terminal either marked with the
letter “N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp D
is secure over the outer sheath.
5. Make sure the electricity supply voltage is the same as that indicated on
the appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted B. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
As the colours of the wires in the mains
lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
10. NOISE
There are some sounds during normal
running (compressor, refrigerant circulation).
SSS
RRR
!
HISSS!
OK
U
BL
BB
CL
ICK
!
BRRR!
!
CR
AC
K!
16 www.aeg.com
SSSRRR!
HISSS!
BLUBB!
SSSRRR!
HISSS!
BLUBB!
CLICK!
BRRR!
CRACK!
CLICK!
BRRR!
CRACK!
11. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
ENGLISH
17
18 www.aeg.com
ENGLISH
19
212000129-A-402012
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement