Shure P2TRE2 Wireless Personal Monitor System with Mix Control

Shure P2TRE2 Wireless Personal Monitor System with Mix Control
P2TRE2
Wireless Personal Monitor System
with Mix Control
The P2TRE2 wireless personal monitor system with mix control
consists of the P2T Wireless Transmixer, the P2R Hybrid Bodypack
Reciever, and the E2 Dynamic Driver Earphones.
P2T Wireless TransMixer
The P2T TransMixer is breakthrough design for in-ear monitoring. It
allows the user to connect two line-level or miclevel inputs directly
into the transmitter. The two signals can then be mixed
independently. You can connect microphones or instruments
directly to the inputs, use line outputs from a mixing console, or
connect it to Shure's AuxPander. In short, no matter what the output
device, you can probably plug it into the TransMixer.
Key Features
●
●
●
●
Built-in audio limiter
Front mounted antenna
Two mic/line input channels for mix control
1/2 Rack space
Operating Controls
●
●
Input level control
Frequency select
LED Indicators
●
●
Tri-color input level
Frequency
Inputs
●
Two Mic/line, XLR-1/4 in. combo input channels
Outputs
●
Two XLR split outputs
P2R Hybrid Bodypack Receiver
The P2R Receiver is the world's first bodypack receiver to function
as a wired receiver, a wireless receiver, or both at the same time.
This and other unique features, along with excellent sound quality,
make the P2R an exceptional value.
Key Features
●
●
●
●
●
●
Can operate as a wired or wireless bodypack, or both
simulaneously
Frequency locator
Built-in headphone limiter
Integrated cable management
High-impact plastic chassis
1/4" Line inpit jack with high/low gain switch
Operating Controls
●
●
Volume knob
Frequency select
LED Indicators
●
●
●
●
●
Power
RF reception
Frequency
Limiter
Low Battery
E2 Dynamic Driver Earphones
Single high energy drivers deliver full range sound and isolation
from outside noise.
Specifications
●
●
●
●
●
Transducer Type: dynamic high energy
Sensitivity (at 1 kHz): 105 dB SPL/mW
Impedance (at 1 kHz) 16 ohms
Output Connector: Gold-plated stereo, 3.5 mm (1/8-inch)
phone plug
Cable Length: 1.57 m (62 inches)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement