Panasonic | TX-L37DT35E | Owner`s manual | Panasonic TX-L37DT35E 37" Full HD 3D compatibility Black LED TV

Model No.
Número de modelo
TC-L32DT30
TC-L37DT30
Owner’s Manual
32”/37” Class 1080p LCD HDTV
(31.5/37.0 inches measured diagonally)
Manual de usuario
Televisión de alta definición de 1080p y
clase 32”/37” de LCD
(31,5/37,0 pulgadas medidas diagonalmente)
For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
www.panasonic.com/help
For assistance (Canada), please call:
1-866-330-0014
www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)
www.panasonic.com/help
English
Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain them for future
reference. The images shown in this manual are for illustrative purposes only.
Español
Gracias por su decisión de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en
el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
TQB2AA0619-1
Experience an amazing level of
multimedia excitement
Enjoy rich multimedia
SD memory card
USB device
Camcorder
VCR
Personal computer
Cable box
Amplifier with
Speaker system
DVD recorder/
Blu-ray Disc recorder
2
DVD player/
Blu-ray Disc player
VIERA Link™ is a trademark of
Panasonic Corporation.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
Contents
Please read before using the unit
SDXC Logo is a trademark of SD3C, LLC.
Getting started
•
•
•
•
DLNA®, the DLNA Logo and DLNA
CERTIFIED™ are trademarks,
service marks, or certification
marks of the Digital Living Network
Alliance.
Basic Features
QuickTime and the QuickTime
logo are trademarks or registered
trademarks of Apple Inc., used
under license therefrom.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDAVI Control™ is a trademark of Panasonic Corporation.
Skype™ is a trademark of Skype limited.
TM
● See page 66 for more information.
Advanced Features
Link “HDAVI Control ” ··················· 32
• VIERA
Network services ······························· 38
••Using
Network Connections·································· 39
TM
TM
• Network settings ········································· 40
• VIERA Connect (Enjoy Internet Service) ···· 43
• Using DLNA feature ···································· 44
• Network Camera ········································· 45
and Setting Channels ······················· 46
• Editing
to Use Menu Functions ························ 48
••How
Picture settings ··········································· 49
• Audio settings ············································· 51
• Timer settings ············································· 51
• Lock ···························································· 52
• Closed caption ············································ 52
• Setup ·························································· 53
Support Information
List for parental control ··················· 54
• Ratings
Information ··································· 55
• Technical
and Cleaning ······································· 59
• Care
······················································· 60
• Disposal
Asked Questions (FAQ) ············· 61
• Frequently
··············································· 64
• Specifications
···························································· 67
• Index
Warranty
• Limited
(for U.S.A. and Puerto Rico only) ················· 68
Services Directory
• Customer
(for U.S.A. and Puerto Rico) ························ 69
• Limited Warranty (for Canada) ····················· 70
Support Information
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC Video
that was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained from a
video provider licensed to provide AVC Video. No license
is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
TV ················································· 17
• Watching
VIERA TOOLS ··································· 20
• Using
content from external devices ······ 21
• Watching
3D images on TV ···························· 22
• Viewing
• Using Media player ······································ 26
Advanced
This product qualifies for ENERGY
STAR in the “Home Use” setting
and this is the setting in which
energy savings will be achieved.
Any modifications to the “Home
Use” setting or other factory default
settings could result in greater
energy consumption beyond
levels that meet ENERGY STAR
qualifications.
Accessories/Optional Accessories ················ 7
Connections ················································ 10
Identifying Controls······································ 12
First Time Setup ·········································· 13
Basic
“RealD 3D” is a trademark of RealD.
This product is covered by U.S.
Patent 5,193,000 until August 28,
2011.
Getting started
“AVCHD” and the “AVCHD” logo
are trademarks of Panasonic
Corporation and Sony Corporation.
• Safety Precautions ········································· 4
3
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead
within a triangle is intended to tell the
user that parts inside the product are a
risk of electric shock to persons.
The exclamation point within a
triangle is intended to tell the
user that important operating and
servicing instructions are in the
papers with the appliance.
Note to CATV System Installer
This reminder is provided to direct the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
Secure Ventilation
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD
TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space
around the TV. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This
LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
Important Safety Instructions (TV set)
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
4
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Only use attachments / accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied
to your home consult your television dealer or local power company.
Follow all warnings and instructions marked on the LCD TV.
Never push objects of any kind into this LCD TV through cabinet
slots as they may touch dangerous voltage points or short out parts EXAMPLE OF ANTENNA
GROUNDING AS PER
that could result in a fire or electric shock. Never spill liquid of any
(NEC) NATIONAL
kind on the LCD TV.
ANTENNA
ELECTRICAL
If an outside antenna is connected to the television equipment,
LEAD-IN WIRE
CODE
be sure the antenna system is grounded so as to provide some
GROUND CLAMP
protection against voltage surges and built up static charges.
ANTENNA
In the U.S. Section 810-21 of the National Electrical Code
DISCHARGE UNIT
provides information with respect to proper grounding of the mast
ELECTRIC
(NEC SECTION 810-20)
SERVICE
and supporting structure, grounding of the lead-in wire to an
GROUNDING
EQUIPMENT
antenna discharge unit, size of grounding conductors, location of
CONDUCTORS
antenna discharge unit, connection to grounding electrodes, and
(NEC SECTION 810-21)
requirements for the grounding electrode.
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
19) An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, or
where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.
When the power cord or plug is damaged or frayed.
b.
If liquid has been spilled into the LCD TV.
c.
If the LCD TV has been exposed to rain or water.
d.
If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the LCD TV to normal operation.
e.
If the LCD TV has been dropped or the cabinet has been damaged.
f.
When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET
(INCLUDING ON SHELVES ABOVE, ETC.).
23) WARNING: SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS AND PLASTIC BAGS/SHEETS TO
PREVENT THEM FROM BEING PLAYED WITH BY YOUNG CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION.
24) WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times
25) CAUTION: The Power switch on this unit will not completely shut off all power from AC outlet. Since the power cord serves
as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power.
Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from
AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from
the AC outlet when left unused for a long period of time (for example, when on vacation).
26) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
27) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
28) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
29) CAUTION: This LCD TV is for use only with the following optional accessory. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation)
• Wall-hanging bracket: TY-WK3L2RW
Always be sure to ask a qualified technician to carry out set-up.
NOTE: This equipment is designed to operate in North America and other countries where the broadcasting system and AC
house current are exactly the same as in North America.
DANGER/WARNING/CAUTION (3D Eyewear)
DANGER
■ About Prohibition of Heating
● Do not put 3D Eyewear in fire, heat it or leave it in
places that can get hot.
3D Eyewear contains a lithium-ion polymer rechargeable
battery, so heating may result in combustion or rupture that
may cause burns or fire.
WARNING
■ About Prevention of Accidental Ingestion
● Do not store any 3D Eyewear parts in places where
small children can reach.
There is a danger small children could swallow such parts by mistake.
• If a child accidentally swallows such parts, seek
immediate medical attention.
■ About Prohibition of Disassembly
● Do not disassemble or modify the 3D Eyewear.
When disposing this product, refer “Disposal” (p. 60) and
disassemble properly for removing the rechargeable battery.
■ About Charging
● Charge by connecting the included charging cable to
the USB terminal of a Panasonic TV supporting 3D.
Charging with other devices may result in battery leakage,
heating or rupture.
● Do not use the included charging cable for uses other
than charging 3D Eyewear.
Doing so may result in heating, combustion or damage.
CAUTION
■ About 3D Eyewear
● Do not drop, exert pressure on, or step on the 3D Eyewear.
Doing so may damage the glass section, which may result in injury.
• Always store the 3D Eyewear in the case provided when not in use.
● Be careful of the tips of the frame when putting on the
3D Eyewear.
Accidentally inserting the tip of the frame into the eye may cause injury.
● Always keep the 3D Eyewear in a cool, dry place.
Failure to do so may cause fire or electric shock.
● Be careful not to trap a finger in the hinge section of the 3D Eyewear.
Doing so may result in injury.
• Pay special attention when children are using this product.
■ About Use of 3D Eyewear
● Parents/guardians should monitor children’s viewing
habits to avoid their prolonged use without rest periods.
● Use only the 3D Eyewear recommended for this TV.
● Only use the 3D Eyewear for the specified purpose.
● Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in
falling or other accidents that may cause injury.
■ About Viewing of 3D Images
● In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
• When you set the effect by using “3D adjustment”, take into account
that the vision of 3D images varies among different individuals.
● Do not use if the 3D Eyewear is cracked or broken.
5
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by
Panasonic Corp. of North America could void the user’s authority to operate this device.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Declaration of Conformity
Model No. TC-L32DT30, TC-L37DT30
Responsible Party:
Contact Source:
email:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-877-95-VIERA (958-4372)
consumerproducts@panasonic.com
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce
heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some
biological effects might occur, but such findings have not been confirmed by additional research.
Product Identification Marking is located on the bottom of the Wireless LAN Adapter.
6
CEA CHILD SAFETY NOTICES
WARNING
Flat panel displays are not always supported on the
proper stands or installed according to the manufacturer’s
recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and may cause personal injury or
even death.
The consumer electronics industry (of which Panasonic is
a member) is committed to making home entertainment
enjoyable and safe. To prevent personal injury or death, be
sure to follow the following safety guidelines:
Panasonic recommends that a qualified installer perform
the wall-mount installation. See page 5.
The American Academy of Pediatrics discourages
television viewing for children younger than two years
of age.
Accessories
Check you have all the items shown.
Accessories/Optional Accessories
Accessories/Optional Accessories
Getting started
TUNE INTO SAFETY:
• One size does NOT fit all. Follow the manufacturer’s
recommendations for the safe installation and use of your
flat panel display.
• Carefully read and understand all enclosed instructions for
proper use of this product.
• Don’t allow children to climb on or play with furniture and
television sets.
• Don’t place flat panel displays on furniture that can easily be
used as steps, such as a chest of drawers.
• Remember that children can become excited while watching
a program, especially on “larger than life” flat panel
displays. Care should be taken to install the display where it
cannot be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables
connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory
(such as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall
mount manufacturers.
• If you have any doubts about your ability to safely
install your flat panel display, contact your retailer about
professional installation.
• Make sure the wall where you are mounting the display
is appropriate. Some wall mounts are not designed to
be mounted to walls with steel studs or old cinder block
construction. If you are unsure, contact a professional
installer.
• A minimum of two people are required for installation. Flat
panel displays can be heavy.
Accessories
Remote Control
Transmitter
N2QAYB000571
Batteries for the
Remote Control
Transmitter (2)
Pedestal (p. 9)
AA Battery
How to assemble (p. 9)
Owner’s Manual
Quick Start Guide
Wireless LAN Adapter (p. 39)
N5HBZ0000055
K2KYYYY00150
Child safety
Product Registration Card (U.S.A.)
3D Eyewear (p. 22)
N5ZZ00000223
7
Optional Accessories
Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
3D Eyewear
(Rechargeable type)
• Product information (Model No. and release date etc.) is subject to change
● TY-EW3D2S ●TY-EW3D2M without notice.
• For more product information
● TY-EW3D2L
(USA) http://www.panasonic.com (Canada) http://panasonic.ca
(Global reference) http://panasonic.net/avc/viera/3d/
Communication Camera
● TY-CC10W
• This camera can be used on VIERA Connect.
• For details, read the manual of the Communication Camera.
Wall-hanging bracket
Screw for fixing the TV onto the
wall-hanging bracket
(not supplied with the TV)
Back of the TV
TY-WK3L2RW
a
Depth of screw:
Minimum: 0.16 ” (4.0 mm)
Maximum: 0.43 ” (11.0 mm)
b
M6
The angle of wall-hanging bracket
can be adjusted in "zero tilting
(vertical)", "5-degree tilting" and
"10-degree tilting"for this TV.
Holes for wall-hanging bracket
installation
(View from the side)
a: 7.9 ” (200 mm)
b: 7.9 ” (200 mm)
WARNING
Customer assumes liability if mounting the unit themselves or if a Panasonic bracket is not used. Any damage resulting
from not having a professional installer mount your unit will void your warranty.
Always be sure to ask a qualified technician to perform any necessary set-up. Incorrect fitting may cause equipment to
fall, resulting in injury and product damage.
Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall
before hanging the bracket.
When using an angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting cables
so that they do not press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
Installing the remote’s batteries
Close
Pull open
Hook
Note the correct
polarity (+ or -).
Caution
Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
not mix old and new batteries.
• Do
not mix different battery types (such
• Do
as alkaline and manganese batteries).
not use rechargeable (Ni-Cd)
• Do
batteries.
Do not burn or break batteries.
8
Attaching the pedestal to TV
■Assembling the pedestal
Attach the cover
• Place the cover so that it covers up the screws for the bracket.
• Insert the protrusion of the cover into the opening of the bracket.
* The cover has a nick on the back.
Attach the cover so that the nick fits underneath the bracket.
Fix securely with assembly screws A
(Total 4 screws).
Tighten screws firmly.
A
Hold the bracket
not to fall over
Bracket
Accessories
Assembly screws
(4 of each)
Cover
Front
Nick on the back
of the cover
XSS5+15FNK
size(M5 x 15)
B
Base
XYN4+F30FJK
size (M4 × 30)
(image: TBL5ZX0104)
■Set-up
Bracket (1)
● TBL5ZA3119
(Total 4 screws).
B
B
Cover (1)
● TBL5ZB3087
Back of
the TV
Foam mat or
thick soft cloth
Cover
(image: TC-L32DT30)
Bracket
Base (1)
● TBL5ZX0104 (TC-L32DT30)
● TBL5ZX0106 (TC-L37DT30)
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Accessories/Optional Accessories
Fix securely with assembly screws
Tighten screws firmly.
Getting started
Front
A
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections)
will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate
ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
TC-L32DT30
Adjust the LCD panel
a: 9.6 ” (242 mm)
to your desired angle.
15°
a
b: 13.8 ” (350 mm)
15°
TC-L37DT30
b
a: 10.8 ” (273 mm)
(View from above)
b: 14.8 ” (375 mm)
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
9
Connections
Connection Panels
LAN connector
Front of the TV
USB 1/2 connector
SD card
slot (p. 26)
USB 3
connector
A
HDMI 4
terminal
AV IN
HDMI
4
C
Back of the TV
PC terminal
DIGITAL AUDIO OUT
B
Antenna or Cable connection
VHF/UHF Antenna
Back of the TV
Power Cord
(Connect after
all the other
connections have
been made.)
Cable TV
or
VHF/UHF Antenna
• NTSC (National Television System Committee):
• ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standard-definition television
(SDTV), data broadcasting, multichannel surround-sound audio and interactive television.
Cable
● You need to subscribe to a cable TV service to enjoy viewing their programming.
● You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming.
The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 11)
Note
● When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV.
● For additional assistance, visit us at: www.panasonic.com/help
www.panasonic.ca
Connection references
■ Antenna terminal
■ Pin terminals
red
■ HDMI terminal
blue green
green/ yellow
● Firmly tighten by hand.
10
● Insert firmly.
● Insert firmly.
AV cable connection
Best
To use HDMI terminals
AV Equipment
HDMI
AV OUT
e.g. Blu-ray Disc
player
HDMI-DVI
Conversion cable
DVI OUT
AV Equipment
AUDIO OUT
e.g. Blu-ray Disc
player
L
R
Getting started
● VIERA Link connection, please refer to p. 33
● The HDMI connection is required for a 1080p signal.
To use COMPONENT terminals
Y
green
green green
PB COMPONENT
blue
Good
blue
blue
VIDEO OUT
AV Equipment
PR
red
red
e.g. Blu-ray Disc
player
L
white white AUDIO
OUT
R
red
red
red
Connections
red
white
To use COMPOSITE terminals
AV Equipment
yellow yellow
yellow
Basic
(Not HD)
L
e.g. DVD Recorder
or
COMPOSITE
white white OUT
white
R
red
red
red
e.g. VCR
Audio connection
Audio equipment
DIGITAL
AUDIO IN
Optical cable
e.g. Amplifier
● For HDMI-ARC (Audio Return Channel) connection, see p. 32
PC / Computer connection (VGA)
RGB PC cable
Conversion adapter (if necessary)
Computer
PC OUT
Audio OUT
Audio cable
Connect cable which matches the
audio out terminal on the computer
11
Identifying Controls
TV controls/indicators
Front of the TV
3D Eyewear
transmitter
Selects channels in sequence
Volume up/down
Menu navigations
Remote control
sensor within about
23 feet (7 meters)
in front of the TV set
Changes the input mode
Chooses menu and submenu entries
POWER button
Power indicator (on: red, off: no light)
C.A.T.S (Contrast Automatic Tracking System)
Note
The TV consumes a small amount of electric energy even when turned off.
Do not place any objects between the TV remote control sensor and remote control.
Remote control
Switches TV On or Off (Standby)
Closed caption On/Off (p. 17)
Displays 3D settings. (p. 25)
Lights the buttons for 5 seconds
Press again to turn off the button lights
Selects Secondary Audio Programming (p. 17)
Select source to watch (p. 21)
VIERA Link menu (p. 36-37)
Switches to input terminal
that has “GAME” label (p. 21)
Displays Main Menu (p. 48)
Displays VIERA Connect (includes VIERA
CAST) Home screen (p. 43)
Displays Sub Menu for special
functions (when available) (p. 18)
Selects/OK/Change
Exits from Menu screen
Displays VIERA TOOLS menu (p. 20)
Go back to previous menu
Colored buttons
(used for various functions)
Volume up/down
Channel up/down, when viewing from ANT/
Cable source
Sound Mute On/Off
Displays or removes the channel banner (p. 17)
Changes aspect ratio and zoom
(p. 18, 55)
Operates the Favorite channel list function
(p. 18)
Numeric keypad to select any channel or
press to enter alphanumeric input in menus
Switches to previously viewed
channel or input
External equipment operations
(p. 37)
12
Use for digital channels (p. 17)
First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord
is inserted into a wall outlet and when “Auto power on” (p. 53) is set to “No”.
Turn the TV On with the POWER button
(TV)
(Remote)
or
or
Select your language
Language / Idioma / Langue
Step 1 of 7 / Paso 1 de 7 / Étape 1 de 7
Select your language
Seleccione su idioma
Sélection de la langue
English
Español
select
Français
OK
Getting started
Configure your viewing mode
OK
Select your country
Country
Step 2 of 7
Select the country where this TV is being used.
U.S.A.
Canada
select
Other
OK
OK
Select
RETURN
Select your viewing mode (Be sure to select “Home use”)
Set viewing mode
Step 3 of 7
Select your viewing environment
Home use
First Time Setup
Identifying Controls
Select
Selección
Sélection
select
Store Demonstration
OK
OK
Select
RETURN
● Please confirm your selection (Home Use) before pressing OK button.
■ If you select “Store Demonstration” by mistake in ,
confirmation screen will be displayed.
You are selecting the store demonstration mode.
Yes
No
If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be displayed on the
screen.
select
OK
● Select “No” and return to previous screen .
● If you select “Yes”, Screen enters the store demonstration mode.
To display the “Set viewing mode” screen again as shown above and
select “Home Use”, do one of the following:
• Press and hold down the front POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.
Note
● If you use any other step other than
then turn the TV off, or if you used
the EXIT button to quit before completing the settings, the next time you turn
the TV on, “First time setup” will not be automatically displayed.
• The settings up to that point are saved.
• You can start “First time setup”. (p. 53)
● Language, ANT/Cable setup, Input labels, and Clock can also be changed
in the Settings Menu. (p. 53)
13
ANT/Cable setup
Do you use a Cable, Satellite or Fiber Optic box with this TV?
ANT/Cable setup
Step 4 of 7
Do you use a Cable, Satellite or Fiber Optic box with this TV?
Yes
No
OK
Select
Return
Yes
No
b Select connection type
for Cable or Satellite box
and go to (Input labels)
a Select signal type
(Cable/Antenna)
ANT/Cable setup
Step 4 of 7
ANT/Cable setup
Step 4 of 7
How does the TV receive its programming content?
Cable service
(No box)
Which wiring method is used to connect your box to the TV?
Over-the-Air Antenna
select
Antenna/Cable in
VIDEO IN
HDMI
Composite
OK
Select
Antenna
Cable In
Component
OK
Antenna
Cable In
OK
Return
Select
Return
Select scan type
Auto program
Step 4 of 7
select
Start scanning for available channels in your area?
Yes
No
OK
OK
Select
Return
Yes
Start scanning
Auto program
1%
Progress
Number of analog channels
Number of digital channels
0
This may take some time to complete.
Press RETURN to quit
RETURN
Press to exit from
a menu screen
Complete scanning
Auto program completed.
Press OK to continue.
Press to go back to
the previous screen
Number of analog channels
10
Number of digital channels
20
OK
RETURN
Label the inputs for easy identification (Label inputs)
Note
About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New programming
that allows you
to view more
channels featuring
high-quality video
and sound
14
To name each input, follow the instructions on screen.
When done, select NEXT and press OK to go to the next step.
Label inputs
Step 5 of 7
What is connected to HDMI 1 ?
For your convenience, you may name each input for easy identification.
The labels will be shown in the “Input select” menu.
set
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component
Video
HDMI
PC
Next
OK
Select
Return
Customize label
select
Video
or
GAME
GAME
PC
Next
Select
OK
RETURN
1 @. 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9WXYZ
LAST 0 - ,
ABC
abc
Follow the instructions on
screen to complete the
following operations.
--> To edit the labels to match your connected devices.
Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME
THTR/RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/
MONITOR/AUX/OTHER/Not used
• Select “Not used” for any back-panel input that has no device connected to it.
Afterward, the input will be skipped when pressing INPUT, for your convenience.
• The input labels can be changed at any time from the TV’s setup menu
Configure Network settings
Select the Network type
Network settings
Step 6 of 7
Select Ethernet cable of wireless network.
Ethernet cable
Wireless(Wifi)
Set later
Set later:
Go to
You can set in “Setup” menu later.
Wireless (WiFi): Start “Wireless network” (p. 16)
OK
Select
Return
Select the setting mode
Network settings
Step 6 of 7
Checks for proper network connection, settings and
communication to the Internet and server
automatically.
Automatic
Manual
Automatic: Press OK to start setup automatically.
Error screen is displayed when
Network connection has failed.
Manual:
Go to Manual setting.
OK
Getting started
Select
Manual
RETURN
Automatic
■ Manual setting
Start connection test
Network settings
Step 6 of 7
Connection test
Network settings
Connection test
Connection
error
Select
Change
RETURN
Complete “Network settings”
Manual
Helpful information is displayed when you
successfully complete “Network settings”.
Network settings
First Time Setup
IP setting mode
Automatic
IP address
192.168.0.4
255.255.255.0
Subnet mask
Default gateway
192.168.0.1
DNS setting mode
Automatic
DNS
192.168.0.1
Proxy address
Proxy port
Connect test
Mac address
00-00-aa-cc-33-ab
Test in progress...
RETURN
Step 6 of 7
Configure settings of the network connection.
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
■ Error screen
Step 6 of 7
Network settings
Step 6 of 7
Connection test
Network settings are complete.
You can use VIERA Connect.
VIERA Connect lets you enjoy Internet contents
on your VIERA TV.
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Connection to local network (router) failed.
Ensure wireless network availability
Retry
OK
Manual
Set later
OK
Select
Return
RETURN
Retry: Go to “Start connection test”
Set later: Go to
Press to exit from
a menu screen
Adjust the Clock (Set clock)
When done, select NEXT and press OK to go to the next step.
■ Manual setting
Set clock
■ Press to go back to
Step 7 of 7
Adjust the TV's date and time
Mode
Year
Month
Day
Hour
Minute
Time zone
DST
Next
the previous screen
Select
Change
Edit
Manual
------- - ---
DST
Minutes
select
set
or
OK
10
0
9
RETURN
Follow the instructions on
screen to complete the
following operations.
0 - 9
RETURN
■ Auto setting
Set clock
Step 7 of 7
Adjust the TV's date and time
2011/4/5 6:00 AM
Mode
Year
Month
Day
Hour
Minute
Time zone
DST
Next
Select
Change
Auto
EST
Off
RETURN
Mode
Time zone
DST
Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute)
Auto: The clock is adjusted automatically via Internet service. Only
available when the TV is on a network. -->Set “Network settings” first.
Select your time zone. (EST/CST/MST/PST/AKST/HST/NST/AST)
Set DST (Daylight Saving Time) setting. (On/Off)
On: Advances the clock one hour from the time it is set according to
the time zone.
15
Complete First time setup
Congratulations! You are done.
The First time setup can be repeated at any time.
Press MENU and select SETUP; then “First time setup”.
Congratulations!
Setup is complete.
Enjoy your Panasonic VIERA TV.
OK
RETURN
To watch TV via a Cable box, Satellite receiver, or any other source (DVD,
DVR, gaming device, etc.), press the INPUT button and select the appropriate
input.
■ About wireless LAN
● To use the Wireless LAN Adapter, an access point needs to be obtained.
Press to exit from
a menu screen
■ Press to go back to
the previous screen
For the additional information for Wireless LAN Adapters, check the following website:
http://Panasonic.com/NetConnect
● It is recommended to use the Wireless LAN Adapter with the supplied extension cable.
● Do not use the Wireless LAN Adapter to connect to any wireless network (SSID*)
for which you do not have usage rights. Such networks may be listed as a result of
searches. However, using them may be regarded as illegal access.
* SSID is a name for identifying a particular wireless network for transmission.
● Do not subject the Wireless LAN Adapter to high temperatures, direct sunlight or moisture.
● Do not bend, or subject the Wireless LAN Adapter to strong impacts.
● Do not disassemble or alter the Wireless LAN Adapter in any way.
● Do not attempt to install the Wireless LAN Adapter in any incompatible device.
● When VIERA Connect, Network camera, DLNA, or other device is using the
network, do not disconnect the Wireless LAN Adapter.
● Check that the Access point supports WPS*.
(If it does not support WPS, the encryption key of the Access point is required when
configuring settings.)
● Follow the instructions on the Access point setup screen and configure the
appropriate security settings.
For more details on setting of Access point, please refer to operating manual for the
Access point.
● We recommend using 11n (5 GHz) for the wireless system between the Wireless
LAN Adapter and Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the
communication speed may be slower.
● If the wireless system of the Access point is changed, devices that could connect by
Wireless LAN may no longer be able to connect.
● Data transmitted and received over radio waves may be intercepted and monitored.
● Keep the TV away from the following devices as much as possible:
Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals.
Otherwise, the TV failures such as malfunction may occur due to the radio wave
interference.
● When noises occur due to the static electricity, etc., the TV might stop operating for
the protection of the devices. In this case, turn the TV Off with power On / Off switch,
then turn it On again.
* WPS: Wi-Fi Protected Setup
■ Wireless network (First time setup) in
Display “Wireless network”
Select the connection method
select
Wireless network
Please choose connection method:
Search for wireless networks
WPS (Wi-Fi Protected Setup using push button)
16
OK
● Follow the directions on screen to complete the setting.
● See page 41 for more information.
Watching TV
Turn power on
(Remote)
(TV)
Note
Please select correct input -->
(p. 21)
or
Menu > Setup > Advanced setup > VIERA Connect Banner
Select a channel number
To directly enter the digital channel
number
up
or
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
down
example: CH15-1:
Note
Basic
• Also available side CH button on the unit.
[For Cable/Satellite box connection]
- Use your connected box’s remote control.
Getting started
■ VIERA Connect Banner appears
Press OK/INTERNET (or VIERA CAST) button to enter VIERA Connect. (p. 43)
● To hide the banner Press any button except OK/INTERNET (or VIERA CAST)
button (Time-out period of this banner is 5 sec.)
● You can also set the banner display status (on/off) in the Setup menu. (p. 53)
Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the signal
reception between cable TV and antenna. (p. 14, 46)
The channel number and volume level remain the same even after the TV is turned off.
Listen with SAP (Secondary Audio Programming)
■ Select the Audio mode for watching TV
Digital mode
Press SAP to select next Audio track (if available) when receiving a digital channel.
Audio track 1 of 2
(English)
Watching TV
First Time Setup
■ Other Useful Functions
Analog mode
Press SAP to select the desired Audio mode.
• Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
Closed Caption
■ Switches the Closed Caption mode On or Off
Closed caption Off
Closed caption On
Closed caption On mute
Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling CC with their box.
Displaying Information
■ Displays and removes information. When watching programming via the Antenna/Cable input,
shows the channel banner.
Clock
Channel
THE NEWS
15-2
12:30 PM
ABC-HD CC SAP TV-G 1080i Standard 4:3
30
Station
SAP
Signal
identifier
indication
resolution
Closed caption
Rating Level
Picture
mode
Sleep timer
remaining time
Aspect ratio
17
Change aspect ratio and Zoom the picture
■ Press FORMAT to cycle through the aspect modes (p. 55)
• 480i, 480p: FULL/JUST/4:3/ZOOM
• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM
Use when the picture does not fill the whole screen (bars appears on either side of
the image) or portions of the picture is trimmed.
Note
1. Some content, such as film-based movies, are available in extra-wide format.
Top and bottom bars are unavailable.
2. Connected devices, such as Cable/Satellite box, DVD/Blu-ray players and game
consoles have their own aspect (format) settings. Adjust the device’s aspect
settings.
Display the SUB MENU
■ Press SUB MENU to show the Sub Menu screen
This menu consists of shortcuts to convenient functions.
Sub menu is only available when the TV is using the Antenna/Cable input, not when using Cable or Satellite box.
Setup SUB MENU
Specify favorites or type of channels to view when pressing the channel up/
down button.
Set favorite channel (below)
Edit the channel identifier (p. 47)
Check the signal strength (p. 47)
Channel surf mode
All
Set favorite
Edit CH caption
Signal meter
Call up a favorite channel
■ FAVORITE
Channel numbers registered in Favorite are displayed on the favorite tune screen. Select the desired broadcast
station with the cursor or use the number buttons. (p. 17)
Favorite channels
1
select
1/3
26-1
2
or
3
4
5
■ Set the Favorite channel
Setup SUB MENU
Channel surf mode
All
Set favorite
1
1/3
select the list
number
26-1
2
Set favorite
3
Edit CH caption
4
Signal meter
5
save the displayed
channel
or
select the list number
(to save the channel
without pressing OK)
■ Delete a favorite channel
Set favorite
1
1/3
select
26-1
2
3
4
5
■ To change the page
delete
(while holding down)
Press repeatedly to change between pages (1/3, 2/3, 3/3 or exit)
Changes the page forward/backward
18
● Favorite channels cannot be set when using Cable or Satellite box.
■ Other Useful operations
Entering characters
You can use the remote control keys to enter the alphanumeric characters.
■ Switches input mode
Menu
Proxy setting
Proxy address
1 4 8
ABC → abc → 123
↑_____________|
Proxy port
0
■ Press each number key
to cycle through the
alphanumeric character
OK
Select
RETURN
ABC → abc
1 @. 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9WXYZ
LAST 0 - ,
Delete
Navigation area
● You can also use a USB keyboard (not supplied) to enter the alphanumeric characters.
● Keyboard type (p. 53)
Password setting/entering
You need to enter the password when you access locked channel or inputs.
Input your 4-digit password
Password
Enter password.
* * * -
● If it is your first time entering the password, enter the password twice in
order to register it.
● Make a note of your password. Do not forget it. (If you have forgotten
your password, consult your local dealer.)
● When you select a locked channel, a message will be displayed that
allows you to view the channel after you input your password.
● Change password (p. 52)
You can operate non-character keys as remote control keys.
■ Key chart
Keyboard key
Remote key
Keyboard key
Remote key
UP/DOWN/LEFT/RIGHT
Cursor key
F4
Input
Enter
OK
F5
Channel Down(-)
BackSpace
Return (when you do not
F6
Channel up(+)
input character)
0-9
0-9
F7
Volume Down(-)
F1
Menu
F8
Volume up(+)
F2
VIERA Tools
F9(Red)/F10(Green)/
Color key
F11(Blue)/F12(Yellow) (Red/Blue/Yellow/Green)
F3
Submenu
Watching TV
Operate USB keyboard
Basic
Menu
● For more details on setting and operation of the USB keyboard, please also read the operating manuals for the USB
keyboard.
● Some keyboards do not have these keys.
19
Using VIERA TOOLS
VIERA TOOLS is the easy way to access the TV’s special features. They are displayed as shortcut icons on
the TV screen.
Display VIERA TOOLS
Select the item
select
next
Set each item
3D
Change the view 3D⇔2D (p. 25)
VIERA Connect
Displays VIERA Connect Home Screen for Enjoying
Internet Services (p. 43)
Media player
Media player (p. 26-31)
DLNA
Using DLNA feature (p. 44)
Press to exit from
a menu screen
Press to go back
to the previous
screen
Game mode
Change to “Game” mode.
Picture mode (p. 49)
VIERA Link
VIERA Link (p. 36-37)
Eco mode
ECO/energy saving (p. 53)
20
Watching content from external devices
With the connected equipment turned On
Display the Input select menu
Select the input mode
Input select
1
ANT/Cable In
Not used
2
HDMI 1
GAME
3
HDMI 2
4
HDMI 3
5
HDMI 4
6
Component
7
Video
8
PC
or
GAME
AUX
select
enter
(example)
(shortcut) Press the
corresponding NUMBER button
on the remote control to select the
input of your choice. Or, press the
INPUT button repeatedly, to cycle
through the available inputs.
* set unused input to “Not used”
(below) for quick skipping.
Select the input of your choice,
then press OK.
Basic
Input label
Setup ANT/Cable (p. 46)
Edit Device labels
Input labels (p. 53)
Terminal
Label
(example)
● During the selection, if no action
is taken for several seconds,
the “Input select” menu
disappears.
● The terminal and label (names)
of the connected equipment are
displayed.
Note
● The input label will be displayed on the “Input select” screen if the Input label was
customized.
● For side input terminals (HDMI 4), “GAME” Input label is set as default.
■ Press Game to switch to the game screen
Switches to input terminal that has “GAME” label.
● Cycle through the input terminals if there are
multiple input terminals that have “GAME” label.
(p. 53)
● If there is no input terminal with “GAME” label,
you cannot switch the input terminal to any other
input terminal than the one currently selected.
HDMI 1
GAME
HDMI 4
GAME
Video
GAME
Watching content from external devices
Using VIERA TOOLS
HDMI 1
GAME
Operate the connected equipment directly or using the
remote control supplied with the equipment
Note
For
● details, see the manual for the connected equipment.
● PC adjustments (p. 50)
21
Viewing 3D images on TV
You can enjoy 3D images by wearing the 3D Eyewear supplied with this TV and to view 3D broadcasts and 3D image software.
Optional Accessories (p.8)
Basic features of 3D Eyewear
This product cannot be used as sunglasses.
This product can be worn over vision correction glasses.
Part names and functions
Infra-red receiver
Receives infra-red signals from the television.
The liquid crystal shutter open/close timing is controlled by receiving infrared signals from the television, which provide 3D expression of the images.
If the eyewear stops receiving infra-red signal from the television, the power
automatically switches off after 5 minutes.
Liquid Crystal Shutter
(lens)
Controls the images for 3D
viewing.
The left and right liquid crystal
shutters are alternately opened
and closed in time with the left
side and right side images that
are alternately displayed on the
television to achieve the 3D effect.
Charging port
Connect the charging cable.
(p. 23)
Power switch (bottom side
of 3D Eyewear)
Switches on the 3D Eyewear power.
The 3D Eyewear is turned on by setting
the power switch to “ON”. Set the
power switch to “OFF” to turn off the 3D
Eyewear.
Indicator lamp
Lights or flashes during use or
charging to show the status of
the rechargeable battery.
Battery status shown by indicator lamp
Power/indicator lamp status
22
Battery status
Lights for 2 seconds when turned on
Sufficient battery level
Flashes 5 times when turned on
Low battery level
Flashes once every 2 seconds when in use
Operating normally
Lights continuously when off
Charging
Lamp off
Power off
Accessories
3D Eyewear (1)
3D Eyewear case (1)
Charging cable (1)
Ferrite core (1)
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical noise.
1. Attach the ferrite core as close to USB connector of the charging cable as shown.
2. Close the ferrite core until it clicks.
Mini USB connector
Charging the 3D Eyewear
USB connector
Mini USB connector
Viewing 3D images on TV
1. Turn off the television power, and set the 3D Eyewear power switch to “OFF”.
2. Connect as shown in the diagram, and turn on the television power.
• The indicator lamp lights red, and charging starts.
• When the indicator lamp turns off, charging is complete.
(Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable.
Basic
USB connector
Note
● Be sure to turn the television power on when charging. The battery will not be charged when the television power is
off.
23
Using Precautions
Liquid Crystal Shutter
Do not apply pressure to the liquid crystal shutter. Also, do not drop or bend the 3D Eyewear.
Do not scratch the surface of the liquid crystal shutter with a pointed instrument etc.
Doing so may cause damage to the 3D Eyewear, and reduce the quality of the 3D image.
Infra-red receiver section
Do not soil the infra-red receiver section or attach stickers etc. to it.
• Doing so may prevent the receiver from receiving signals from the television, which may prevent the 3D Eyewear from operating normally.
If the 3D Eyewear is affected by other infra-red data communication equipment, the 3D images may not be displayed correctly.
Cautions During Viewing
Do not expose the infra-red receiver section to strong light such as direct sunlight and fluorescent light. The 3D image
may not be displayed correctly.
Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal transceivers) near
the 3D Eyewear. Doing so may cause the 3D Eyewear to malfunction.
The 3D Eyewear cannot operate fully at high or low temperatures.
Please use within the specified usage temperature range (p. 65).
If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within the room may appear
to be flickering. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear.
Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
Other kinds of displays (such as computer screens, digital clocks, or calculators etc.) may be difficult to see while
wearing the 3D Eyewear. (The polarizing axis does not match, causing the displays to appear black.)
Do not wear the 3D Eyewear when watching anything other than 3D images.
Individual differences may occur in which the 3D images are difficult to see, or cannot be seen, especially in users that have a different
level of eyesight between the left and right eyes. Take the necessary steps (wearing glasses etc.) to correct your eyesight before use.
For comfortable viewing
View the screen at a distance at least 3 times further than the effective height of the screen.
Recommended distance:
For a 32-inch television, 3’9” (1.2 m) or more.
For a 37-inch television, 4’6” (1.4 m) or more.
Using the 3D Eyewear at a distance closer than the recommended distance may cause eyesight fatigue.
When the top and bottom area of the screen is blackened, such as during some movies, view the screen at a distance
3 times further than the height of the actual image. (That makes the distance closer than above recommended
distance.)
Viewing 3D images
● When watching 3D movies, take an appropriate length break after watching a movie.
● When watching 3D content on interactive devices such as 3D games or computers, take an appropriate length break
after using for 30 - 60 minutes. Prolonged use may cause eyesight fatigue.
Viewing 3D images
Using the television menu controls, set so that 3D images are shown.
● You can watch 3D images in the following cases:
• When a 3D image supporting Blu-ray Disc is played on a 3D image supporting player/recorder connected using a
HDMI cable to a 3D image supporting television.
• 3D image supported broadcast (program)
• 3D Photo, 3D Movie taken by LUMIX/Camcorder.
• 2D->3D (Simulated 3D) p. 56
Wearing the 3D Eyewear
Set the power switch to “ON”.
(The indicator lamp will light for approximately 2 seconds, then flash once approximately every 2 seconds.)
Put on the 3D Eyewear
View
When the HDMI receives information in which 3D mode is detected, 3D images are automatically displayed
according to the signal.
If the 3D images are not displayed correctly or the images cause discomfort, the images can be adjusted by “3D
format select” or “3D settings”.
● Change the view 3D⇔2D, 3D settings (p. 25)
After Use
Set the 3D Eyewear power switch to “OFF”.
(The 3D Eyewear indicator lamp turns off, and the power turns off.)
After using the 3D Eyewear, store it in the case provided.
24
Change the view 3D⇔2D
■ Simply switches 3D ⇔ 2D images (Auto mode)
select
3D format select
● VIERA TOOLS -->p. 20
”3D” icon also available.
3D
2D
OK
(example)
●
Switches to Manual mode (see below)
■ Change 3D format (Manual mode)
During above operation press red button and switch to manual mode.
Display “3D format select (Manual)
Press 3D to cycle through the 3D format
3D format select (Manual)
3D format select (Manual)
Native
Frame sequential (3D)
Native
Frame sequential (2D)
Frame sequential (3D)
Side by side (3D)
Frame sequential (2D)
Side by side (2D)
Top and bottom (3D)
Side by side (3D)
Top and bottom (2D)
2D -> 3D
Side by side (2D)
Basic
2D -> 3D
(example)
3D settings (Adjust 3D images)
■ 3D adjustment
Select “3D settings” in “Setup”
Changes 3D depth by adjusting left-right parallax.
Set “On” and adjusts “Effect”
Select the item and set
3D adjustment
3D settings
Auto detect 3D
3D signal notification
2D -> 3D depth
select
3D adjustment
Effect
Auto 1
On
Medium
select
On
adjust
+1
3D adjustment (On/Off)
Effect (-3 to +3)
next
3D adjustment
Left / Right swap
Normal
Diagonal line filter
Off
Safety precautions
Viewing 3D images on TV
• How to Use Menu Functions (p. 48)
• Using “Setup” menu (p. 53)
Settings
Item Description
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D), AVCHD file,etc)
Auto 2: Same as Auto 1. plus detects 3D signal by identifying similar image in side by side or topAuto detect 3D
and-bottom 3D formats.
Note: choose 3D mode manually, when auto detection is not available. (Off/Auto 1/Auto 2)
3D signal notification On: Displays a message according to the signal received by the “Auto detect 3D”. (On/Off)
2D->3D depth
Adjusts 3D depth. Available only when “2D->3D” is selected in “3D format select”.
(Minimum/Medium/Maximum)
3D adjustment
See above. (3D adjustment (On/Off), Effect (-3 to +3))
Change
this to On when the phases are reversed. (when there is an unusual sense of depth).
Left / Right swap
(Normal/Swapped)
Diagonal line filter On: Resolves discomfort caused by receiving a quincunx matrix signal. (On/Off)
Safety precautions Displays message for viewing 3D images.
* The perceived three dimensional effects of the 3D Eyewear differ from person-to-person.
* If a signal received from an external device is different from the 3D setting of the TV, such as 2D signal when the TV is set to
3D mode, the images may not be displayed correctly.
25
Using Media player
You can view still and motion images and play music saved on a USB flash memory and an SD card.
Basic features for Media player
■ Available contents and features
Photos
Media p layer
Videos
Photos
Media p layer
All photos
Music
Videos
Media player
Titles/Folders view
Trip1
Trip2
Trip3
Trip4
Trip5
Room
Nature1
Nature2
Nature3
Nature4
Nature5
Nature6
2009_4
2009_7
My Music_1
Music
My Music_2
Folders
My Music_3
2009_9
Select
SUB MENU
Slideshow
OK
Drive select
SUB MENU
Play
Media select
Drive select
Media p layer
Select
SD memory card
Info
RETURN
Sort
OK
RETURN
Media select
Photos
All photos
Media p layer
SD memory card
Info
Drive select
Select
SUB MENU
Play Folder
Media select
Information panel
Photos
All photos
Media p layer
OK
SD memory card
Info
RETURN
Drive select
Media select
Option menu
Photos
All photos
1/70
Media p layer
Photo
All photos
Setup SUB MENU
Slideshow settings
File name:
Thumbnails size
100-0001.jpg
Date:
Select
15/04/2011
Size:
OK
RETURN
640x480
Drive select
Media Select
OK
OK
Select
RETURN
Select
SUB MENU
Slideshow
SD memory card
Select
OK
RETURN
Sort
Info
Drive select
SD memory card
RETURN
Select
SUB MENU
Slideshow
SD memory card
Media select
OK
Photos
RETURN
Sort
Videos
Info
Music
Media select
SD memory card
Device select
select
select
OK
OK
Select
SUB MENU
Slideshow
OK
RETURN
Sort
Info
Drive select
SD memory card
Media select
Displays data information.
(File name, Date, and Size etc.)
*Information differs depending
on selected data.
Select
SUB MENU
Slideshow
OK
RETURN
Sort
SD memory card
Info
Drive select
Media select
Option menu
Photos --> p. 28-29
Videos --> p. 30
Music --> p. 31
Media information
■ Inserting or removing an SD card/USB flash memory
SD card
● Insert the card
● Remove the card
USB flash memory
● Insert the device
● Remove the device
Insert straight in
Pull straight out
Gently insert the SD Card
label surface facing front.
Label surface
Press in lightly
on SD Card,
then release.
Push until a
click is heard
Cutout
● Compliant card type (maximum capacity):
SDXC Card (64 GB), SDHC Card (32 GB), microSDHC
Card (32 GB), SD Card (2 GB), miniSD Card (2 GB),
microSD Card (2 GB) (requiring microSDHC Card/
miniSD Card/microSD Card/ adapter)
● If a microSDHC Card, miniSD Card or microSD Card is
used, insert / remove it together with the adapter.
● Media player only supports USB Mass storage
class devices.
● For more information and cautions on SD card and USB flash memory (p. 56)
26
Viewing Contents
Insert Media (SD card or USB flash memory)
• Auto play setting
Image viewer auto play (p. 53)
Display Media player
Select Drive
(Display connected drive)
Media player
select
Drive select
OK
OK
Select
RETURN
SD memory card
Select the Media
Media player
Basic
select
Media select
OK
OK
Select
RETURN
Photos
Videos
Music
SD memory card
Select the data (Photos/Videos/Music)
How to view the data differs depending on data storage conditions.
Select Title/Folder
Photos
Using Media player
Media player
Sort by Date
23/10/2009
25/10/2009
01/11/2009
05/11/2009
10/11/2009
24/11/2009
01/12/2009
03/12/2009
20/12/2009
22/12/2009
22/11/2009
23/11/2009
select
OK
Select
OK
SUB MENU
Slideshow
RETURN
Sort
SD memory card
Info
Drive select
Media select
(e.g. Photos)
Select file
Media p layer
Photos
All photos
select
OK
Select
SUB MENU
Slideshow
■ Press to exit from
a menu screen
OK
RETURN
Sort
SD memory card
Info
Drive select
Media select
(e.g. Photos)
View or Play
Single view
■ Press to go back to
select
the previous screen
OK
Rotate
Prev.
Stop
Next
RETURN
(e.g. Photos)
Thumbnail / Playback view
image and operation are different
depending on selected contents.
● Photos view --> p. 28-29
● Videos view --> p. 30
● Music view --> p. 31
27
Photos view
[Photos thumbnail]
Media p layer
[Features]
Photos
Select
SUB MENU
Slideshow
● Slideshow setting
● Sort
● Drive select
● Media select
All photos
OK
SD memory card
Info
RETURN
Sort
* In DMR mode, Slideshow is not
available
DMR: Digital Media Renderer
p. 38
Drive select
Media select
[Photos playback screen]
Photo status
Single view
Slideshow
● To display/hide
Single view
Guide and Banner
Navigation Guide
Slideshow
Single view
* In DMR mode, Rotate/OK/Next/
Prev. are not available.
Rotate
Prev.
Rotate
Prev.
Stop
Next
RETURN
Stop
Prev.
Next
RETURN
Next
RETURN
Stop
2D
2D/3D status
Slideshow
Display “Slideshow settings”
Adjust items and select “Slideshow start”
Media Player settings
Photo
Slideshow
All photos
Start Slideshow
Frame
Off
Photo effect
Off
Transition effect
Photo size
Off
Off
Display interval
Normal
Repeat playback
On
RETURN
Select
OK
RETURN
Sort
Off
Photo effect
Off
SD memory card
Info
Drive select
Media select
(example)
OK
Off
Photo size
Select
SUB MENU
Slideshow
Frame
Transition effect
Soundtrack settings
Change
select
Start Slideshow
Normal
Burst playback
Slideshow settings
Normal
Burst playback
Off
Display interval
Normal
Repeat playback
On
● To stop in mid-cycle Press
Soundtrack settings
Select
Change
RETURN
(example)
■ Slideshow settings
Settings
Frame*
Photo effect*
Item Description
Select the Frame (Off/Array/Collage/Drift(with calendar)/Drift/Gallery(with calendar)/Gallery/Cinema)
Select the display effect (Off/Sepia/Gray scale)
Select the Transition effect shown between photos (Off /Fade in/Wipe ↓/Wipe ↑/Wipe →/Wipe ←/
Slide in ↓/Slide in ↑/Slide in →/Slide in ←/Zoom in/Comb ↑↓/Comb →←/Dissolve/Checker
Transition effect
wipe/Motion/Random)
Removes the black borders that are added according to the size of the photo being displayed. (Normal/Zoom)
Photo size*
Burst playback*
Continuously plays photos that were shot. (On/Off)
Set “Display interval” each image is displayed in the Slideshow mode.
Display interval
(Short/Fast/Normal/Slow/Very slow)
Repeat playback Turn the Slideshow Repeat (cycle) function on or off (Off/On).
Select the music (Off/Music 1/Music 2/Music 3/Music 4/Music 5/User selected*/Auto*)
Soundtrack
User selected: Plays the soundtrack registered in the “Soundtrack settings”. (below)
settings
Auto: Plays the songs on the SD card or USB flash memory.
• Picture quality may become lower depending on the slideshow settings.
• Picture setting may not work depending on the slideshow settings.
* When using DLNA (DMP mode) feature these menus are not displayed.
DMP: Digital media player p. 38
■ Soundtrack settings
Select “Soundtrack settings”
Slideshow settings
Select “User select”
Soundtrack settings
Start Slideshow
Off
Music 1
Photo effect
Off
Music 2
All photos
select
Transition effect
Off
Music 3
Normal
Music 4
Burst playback
Off
Music 5
Display interval
Normal
Repeat playback
On
Soundtrack settings
This song
All songs in folder
Select
(example)
Select
User selected
SUB MENU
Slideshow
Auto
User selected
OK
OK
RETURN
Soundtrack settings
28
Photos
OFF
Frame
Photo size
Select the song and register
Media p layer
03 XXXX
OK
RETURN
Sort
Info
Drive select
SD memory card
Media select
This song: Register current music.
All songs in folder: Register the music in a folder.
Sort
Display “Sort select” menu and select item
Displayed each view
select
Media player
Photos
• Folders
(ascending order of
numeric/alphabetical)
• Sort by month
(ascending order of
the month)
• Sort by date
Sort by Date
Folders
Sort by date
23/10/2009
25/10/2009
01/11/2009
05/11/2009
10/11/2009
24/11/2009
01/12/2009
03/12/2009
20/12/2009
22/12/2009
22/11/2009
23/11/2009
Sort by month
OK
Select
OK
SUB MENU
Slideshow
RETURN
Sort
Info
Drive select
SD memory card
Media select
(e.g. Sort by date)
Photo options
■ Slideshow settings (p. 28)
Display “Setup SUB MENU” and select item
select
Setup SUB MENU
■ Thumbnails size
Slideshow settings
To change the number of photos on a thumbnail screen
at a time
(7 × 4 ⇔ 10 × 6)
Multi shot 3D
Thumbnails size
OK
■ Multi shot 3D (Available All Photo or Photos view)
Select first photo and second photo with OK
[Select first]
Photos
Multi shot 3D
All photos
[Select second]
select
Media p layer
Photos
Multi shot 3D
All photos
select
set
Select
SUB MENU
Select
OK
RETURN
Info
set
SD memory card
Select
SUB MENU
Select
OK
RETURN
Info
SD memory card
• To select the
second image,
the size and
date must be
the same as
the first image.
■ Error screen
Please wait a moment
The two photos selected for Multi-Shot 3D are not related.
Try to convert them to 3D anyway?
Yes
3D photo is created
No
Using Media player
No
Start Conversion processing
Conversion processing message will be displayed.
Basic
Media p layer
(example)
• Error message will be
displayed If first and second
picture has no relation, or for
other reasons.
Save the 3D image
Save the 3D image generated by the above steps to the original drive (where the picture was).
Yes
The Multi-Shot 3D conversion was successful.
Save the 3D image to the connected storage device?
Drive
(SD card only)
Yes
No
29
Videos view
[Videos thumbnail]
Media p layer
[Features]
Videos
● Play
● Drive select
● Media select
● Aspect change
Titles/Folders view
Trip1
Trip2
Trip3
Trip4
Trip5
Room
Nature1
Nature2
Nature3
Nature4
Nature5
Nature6
2009_4
2009_7
* In DMR mode, Resume playback
is not available
2009_9
Select
SUB MENU
Play
OK
SD memory card
Info
RETURN
Drive select
Media select
[Videos playback screen]
SD
01/04/2010 15:34
Movie banner
00:00.10
00:00.03
Drive type (SD/USB/DLNA)
SD
01/04/2010 15:34
00:00.10
00:00.03
Date and time or
File name
RETURN
2D
2D/3D status
● To display/hide Guide and Banner
Navigation area
● Subtitles are not supported
in MKV file.
Elapsed time of current movie
* Counter may not work correctly with DLNA
feature. In this case “--:--:--”is displayed.
30 seconds skip (In DLNA mode only (depends on content))
Forward
• Forward/Reverse
Play/Pause
Five level of 1 to 5 (x2, x5, x30,
Stop
x70, x100) are available.
Reverse
* In DMR mode, Next skip/Prev. skip are
not available.
RETURN
Video options
■ Repeat playback
Displayed menu will differ depending on contents.
Select “Video options” in “Setup SUB MENU”
Set play repeat function (On/Off)
Video options
Setup SUB MENU
Repeat playback
Video options
On
select
next
Compatible Data format for Media player (SD card/USB flash memory)/DLNA
Media
Compatible format
Photo
• JPEG files (DCF and EXIF standards)
Sub-sampling
- 4:4:4, 4:2:2 and 4:2:0
Image resolution
- 8 × 8 to 30,712 × 17,272 pixels
Videos
• SD-Video Files (SD-Video Standard Ver.1.3)
Modified data with a PC may not be displayed correctly.
• AVCHD Standard compatible files
Modified data with a PC may not be displayed correctly.
• MotionJPEG files (taken with LUMIX)*
• MP4 files (Video codec H.264 | Audio codec MP3/AC-3/LPCM)
• MKV files (Video codec H.264 | Audio codec MP3/AC-3/LPCM)
• MPEG-2 PS files**
• MPEG-2 TS files**
Music
• MP3 files (MPEG Audio Layer-3)
• AAC files (MPEG2-AAC / MPEG4-AAC)
• LPCM files**
● For more data format information. (p. 56)
30
* For Media player only
** For DLNA only.
Music view
[Music thumbnail]
Media player
My Music_1
[Features]
Music
My Music_2
Select
SUB MENU
Play Folder
● Play folder
● Drive select
● Media select
Folders
My Music_3
OK
SD memory card
Info
RETURN
Drive select
Media select
[Music playback screen]
Navigation area
AAAAAA
BBBBBBB
XXXXXXX
Forward
Play/Pause
Stop
Reverse
RETURN
00:00.05 / 00:00.49
RETURN
Artist name
Album name
Song name
• Forward/Reverse
Five level of 1 to 5 (x2, x5, x30,
x70, x100) are available.
* In DMR mode, Next skip/Prev. skip/
User BGM setting are not available.
● To display/hide Guide and Banner
Elapsed time of current song
* Counter may not work correctly with
DLNA feature.
In this case “--:--:--”is displayed.
Select “Music options” in “Setup SUB MENU”
■ Repeat playback
Set play repeat function (Off/Repeat Folder/One
song)
Setup SUB MENU
Music options
Music options
next
Display “Menu”
On
Repeat playback
■ Adjust the Picture, Audio and 3D settings
Picture
1/2
Reset to defaults
Vivid
Picture mode
Select the item
Audio
VIERA Link
Back light
20
Contrast
0
Brightness
0
Color
0
Tint
0
Sharpness
0
adjust
OK
example: Picture menu
Picture menu/Audio menu (p. 49-51)
3D settings (p. 25)
■ Use VIERA Link function
select
VIERA Link control
Set
select
select
Picture
3D settings
select
Using Media player
Other settings in Media player
Menu
Basic
Music options
Recorder
change
Speaker output
TV
Back to TV
VIERA Link menu (p. 36)
31
VIERA LinkTM “HDAVI ControlTM”
Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote.
Enjoy additional HDMI Inter-Operability with compatible Panasonic products.
This TV supports “HDAVI Control 5” function.
Connections to equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables
enables VIERA Link controls.
Equipment with the “HDAVI Control” function enables the following operations:
Version
Operations (See p. 34-37, for more information)
HDAVI Control or later
Input Switching
• Automatic
on link
• Power
off link
• Power
speakers
• Default
• Speaker control
Link control only with the TV’s remote control
• VIERA
• Unselected device energy save (for available equipment only)
setting information (Language, time. etc.)
• Provides
• Automatic lip-sync function
• Energy saving mode (with Quick Start mode)
Return Channel
• Audio
Audio Return Channel (ARC) is a function that enables digital sound signals to
HDAVI Control 2 or later
HDAVI Control 3 or later
HDAVI Control 4 or later
HDAVI Control 5
be sent via an HDMI cable back from the TV to a connected audio device.
■ When adding new equipment, reconnecting equipment or changing the setup after the connection,
turn the equipment on and then switch the TV on. Set the input mode to HDMI1, HDMI 2, HDMI 3 or
HDMI 4 (p. 21), and make sure that the image is displayed correctly.
VIERA Link “HDAVI Control”, is based on the control functions provided by HDMI and industry standard known as HDMI
CEC (Consumer Electronics Control), with unique function that we have developed and added. As such, its operation with
other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Please refer to the individual manuals for other manufacturers’ equipment supporting the VIERA Link function.
■ HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
RP-CDHS15 (4.9 ft/1.5 m), RP-CDHS30 (9.8 ft/3.0 m), RP-CDHS50 (16.4 ft/5.0 m)
* For more details on the external equipment’s connections, please refer to the operating manual for the equipment.
32
VIERA Link™ Connections (with VIERA Link function)
■ Terminal overview
Back of the TV
AV IN
HDMI
4
VIERA LinkTM “HDAVI ControlTM”
■ Connecting DVD Recorder (DIGA)
HDMI cable
DVD recorder (DIGA)
with VIERA Link function
■ Connecting Home theater system/AV amp
HDMI 1 is recommended.
HDMI cable
Optical cable
Home theater systems
with VIERA Link function
DVD recorder (DIGA)
with VIERA Link function
No optical cable is necessary when connecting a Home Theater supporting “HDAVI control 5” with an HDMI
cable. Audio will be supported via ARC (Audio Return Channel) (p. 32)
● One AV amp and one DVD recorder (DIGA) can be operated with this unit.
Advanced
AV amp with
VIERA Link function
■ Connecting HD Camcorder/Digital camera
Press INPUT and select an available HDMI terminal, then connect the camcorder to this input. After connection,
confirm the HDAVI control functions. (p. 34-37)
AV IN
HDMI
4
HDMI / mini HDMI cable
LUMIX
HD Camcorder
with VIERA Link with VIERA Link
function
function
If connection (or setting) of equipment compatible with HDAVI control is changed, switch the power of this unit Off and On again while the power of
all equipment is On (so that the unit can correctly recognize the connected equipment) and check that the connected equipment playback operates.
Note
● Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective manuals.
● When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
● Some devices use Mini-HDMI terminal. HDMI (type A) to Mini-HDMI (type C) cable or adapter should be used.
33
VIERA Link settings and Available features
To use all VIERA Link functions: After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”.
Some features are disabled depending on the “HDAVI Control” version of the equipment.
Please check the list (p. 32)
Display the menu
Select “VIERA Link settings” in “Setup”
Menu
Setup
1/2
3D settings
select
Channel surf mode
All
Language
next
Clock
ANT/Cable setup
Input labels
Network settings
VIERA Link settings
Select “VIERA Link”
Menu
VIERA Link settings
select
On
VIERA Link
Power on link
No
Power off link
Yes
Energy saving mode
Quick start
Unselected device energy save
No (stay on)
TV
Default speakers
Select “On”
(default is On)
change
Press to exit from
a menu screen
Select and make other settings
Press to go back
to the previous
screen
Menu
VIERA Link settings
On
VIERA Link
Power on link
No
Power off link
Yes
Energy saving mode
Quick start
Unselected device energy save
No (stay on)
Default speakers
34
TV
select
Automatic Input Switching
When using a Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to
the appropriate input, when playback begins on one of those devices.
• For a Home theater system the speakers automatically switch to the theater system.
Power on link
Yes: The TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible
equipment is initially turned on and the Play mode is selected.
Power off link
When “Yes” is selected and the TV is turned off, all connected VIERA Link compatible equipment is also automatically
turned off.
• A Panasonic DVD Recorder will not turn off if it is still in Rec mode.
• The TV remains on even if the VIERA Link compatible equipment is turned off.
Quick Start: When TV is turned off, all connected VIERA Link compatible equipment is moved to ECO Standby mode*
automatically under these conditions.
• Power off link:(Yes), The connected equipment has “HDAVI Control 4 or later (with Quick Start mode)”
* Minimum power consumption of Standby condition for the equipment.
Unselected device energy save
Yes: The connected VIERA Link compatible equipment will be turned off automatically when not in use under these
conditions.
• The connected equipment has “HDAVI Control 2 or later” (for available equipment only)
[ Example of timing for operation ]
• When the input is switched from the HDMI.
Default speakers
“TV” is the default setting. To set the Home theater system as Default speakers, change the Default speakers setting
from “TV” to “Theater”. Sound will be output from the Home theater whenever the TV is powered on.
VIERA LinkTM “HDAVI ControlTM”
Energy saving mode
Automatic lip-sync function
Minimizes lip-sync delays between the picture and audio when you connect to a Panasonic theater system or
Amplifier.
The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Home
theater/Player) that has “HDAVI Control 3 or later” function connected to a TV with an HDMI cable.
Recorder
Home theater
Player
On Screen Display Language setting
(English/Español/Français)
Transmittable data
○
○
○
Panel Aspect Ratio
(16:9 fixed)
○
○
○
Closed caption information
(Mode/CC type/Digital setting)
○
---
---
Advanced
TV provided setting information
Note
● There is a possibility that all the GUI language information might be set from equipment that has an HDMI CEC
function connected to the TV with an HDMI cable. Depending on the operating conditions or the specification for
each piece of equipment the setting may or may not be applied.
● For more details on the external equipment’s operation, please refer to the operating manual for the equipment.
35
VIERA Link menu and Available features
Some features are disabled depending on the “HDAVI Control” version of the equipment.
Please check the list (p. 32)
Display the VIERA Link menu
or
select
next
Select the item
select
VIERA Link control
Recorder
Speaker output
TV
Back to TV
● Items in the VIERA Link menu may be grayed out
if no compatible equipment is connected (must be
HDAVI Control 2 or later) or if the equipment has
not initiated a connection with the TV. In that case,
switch the equipment’s power Off and On while the
TV is On.
For further details, see “VIERA Link” on page 34.
Select
VIERA Link control
Home theater
Press to exit from
a menu screen
Speaker output
TV
Back to TV
Press to go back
to the previous
screen
36
Set
change
Speaker control
You can select the Home theater or TV speakers for audio
output.
Control the theater speakers with the TV remote control.
This function is available only when a Panasonic Amplifier
or Player theater is connected.
select
change
Recorder
Volume up / down
Mute
Select “Speaker output”
Select “Home theater” or “TV”
VIERA Link control
■ Home theater: Adjustment for the equipment
Speaker output
sound of the TV is muted.
• The
the equipment is turned off, the TV speakers
• When
take over.
“Home theater” turns the equipment on
• Selecting
automatically if it is in Standby mode.
■ TV: The TV speakers are on.
TV
Back to TV
In the VIERA Link menu, you can select HDMI connected equipment and access it quickly. Continue using your TV
remote control to operate the equipment, pointing it at the TV.
● If there is more than one equipment item, a number
Select “VIERA Link control”
after the name indicates the number of items. (e.g.
Select the equipment you want to access
Recorder 1/Recorder 2/Recorder 3...)
(Recorder/Home theater/Player/Camcorder/LUMIX/
● The number of equipment items that can be connected
Digital camera/Network camera)
is three for recorders, and a total of three for Home
● Using VIERA TOOLS (p. 20)
theater/Player/Camcorder/LUMIX/Digital camera/
select
Network camera.
VIERA Link control
change
Recorder
Speaker output
TV
You can select available items
only.
Back to TV
■ Available TV remote control buttons
Note
● There is a limit to the number of HDMI connectors.
Operate the equipment with the TV remote
control, pointing it at the TV
● To operate the equipment, read the manual of the
VIERA LinkTM “HDAVI ControlTM”
VIERA Link control only with the TV’s remote control
equipment.
Whether an operation is available differs depending on the connected equipment.
Play
Set/Access
Stop
Return to previous menu
Reverse/Forward
Display the functions
menu on the equipment
Available when the purpose of the keys
is displayed on screen
Exit
-
Skip Reverse/Forward
Pause
Advanced
Move the cursor/Select
Closed caption
Channel Up/Down
SAP (Select Audio Mode)
0-9
Select digital subchannel
Back to TV
Returns the input selection of the device selected with the VIERA Link Control to the TV input.
Select “Back to TV”
select
VIERA Link control
Recorder
Speaker output
OK
TV
Back to TV
37
Using Network services
Available Network service and features
■ VIERA Connect
p. 43
Easily expandable cloud-based services and carefully selected apps.
■ Using DLNA feature (Home network)
p. 44
This TV is a DLNA Certified™ product.
DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more
convenient to use on a home network. To learn more, visit www.dlna.org.
It allows you to share photos, videos and music stored in the DMS (for example, PC with windows 7 installed, etc.)
connected to your home network, and enjoy watching them on the TV screen as DMP or DMR.
DMS (Digital Media Server)
Ensure the connected equipment has a DLNA Certified media server.
Store photos, videos or music in the media server, and then you can watch them on the TV.
“Windows 7” is the server software that has been tested for the performance with this TV (current as of January, 2011).
For installing, read the manual for the server software.
● The DLNA control function of Windows 7 is not supported with this TV.
● When a server software for the media server is installed on the PC, the data may be at risk of being accessed by
other people. Please be aware of the settings and connections under network circumstances at the office, at a
hotel or even at home when not using a router.
DMP (Digital Media Player)
Finds the content on DMS and provides playback.
DMR (Digital Media Renderer)
Plays content received from the DMC, which will find content from DMS.
DMC (Digital Media Controller)
Finds the content on DMS and plays it on the DMR (This TV). (e.g. PDA, Internet tablets etc.)
■ DLNA remote control
This TV supports the DLNA control function.
To use this function, set the “Network link” (p. 42)
■ Using Network camera
38
p. 45
Network Connections
Contact your Broadband service provider
NOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at
no less than the following connection speed. If you already have such service, make sure that the connection
speed exceeds the following.
● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively.
● Dial-up Internet service cannot be used for VIERA Connect.
Select wired or wireless connection
If the Cable/DSL modem is close to the TV and you have only one TV set, you may choose a wired connection.
If the Cable/DSL modem is far from the TV and/or you have more TVs in the house, you may want to use a
wireless network.
Connecting to the Internet
Wired connection (Directly connected)
If you are not using the network for connecting anything else but the TV, you could just connect the TV
directly to the Cable/DSL Ethernet connection.
Wired connection (Using Router)
Wireless connection
If you are using the network for connecting various equipment and want to connect the TV, you could also
use a Wireless LAN Adapter and Access point to connect the TV to the Internet
A
Internet
LAN cable
(shielded)
Modem
Back of the TV
B
Using Network services
If you are using the network for connecting various equipment and want to connect the TV, you should use a
router to connect the TV to the Internet
Internet
Ensure to use a LAN straight
cable for this connection.
Modem
Home network
(DLNA feature)
Back of the TV
C
Hub, Router
or
Access point
■ Setup Wireless LAN
Adapter
Insert straight in
DLNA Certified
media server
(for example, PC,
etc.)
Advanced
LAN cable
(shielded)
Network
camera
● To use only DLNA features or Network camera, you can operate the features without Broadband network environment.
DLNA Certified
media server
Network camera
Ensure to use a LAN cross
cable for this connection.
Back of the TV
LAN cable
(shielded)
39
Network settings
This is a setting for connecting to a broadband environment.
Display the menu
Select “Network settings”
Menu
Setup
1/2
select
3D settings
Channel surf mode
All
Language
Clock
ANT/Cable setup
Input labels
Network settings
■ Press to exit from
VIERA Link settings
a menu screen
Select the settings and set
■ Press to go back to
Menu
the previous screen
select
Network settings
Connection test
adjust
Network connection Wireless (WiFi)
Wireless network
IP address/DNS settings
Network link
Network cameras list
Software update
Mac address
00-0b-97-7c-65-e9
Connection test
Check that the Network settings are as shown below, and then start “Connection test”.
Select “Connection test” and press OK
(It takes a while to cancel the test.)
Displayed Connection test screen
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Complete Connection test
Success-->Completion screen is displayed.
Error-->Follow the directions on screen to complete the setting.
If you perform the Proxy settings, check the Proxy address
and the Proxy port number.
Test in progress...
Network connection
Select Network type (Ethernet cable/Wireless (WiFi))
Wireless network (Confirm Current settings and status)
This setting is performed only when “Wireless (WiFi)” is selected in “Network connection” above.
■ Displayed “Current settings and status” screen (If connected with Wireless LAN Adapter)
You can confirm the AP connection status.
(SSID/Wireless type/Security type/Encryption type/Connection status /Signal strength)
Press “Wireless network”
select
SSID :
Wireless type :
Security type:
Encryption type :
Connection status :
Signal strength :
Connect using these settings?
OK
Yes
40
When you change “Wireless network” -->Press “No”
Wireless network
See “Sets / Changes wireless network setting” on p. 41
and follow the directions on screen to complete the
setting.
You need to be “Connected” to use network devices.
Please set Access point settings to “Connected”.
No
(example)
Wireless network (Wireless network setting)
■ Sets / Changes wireless network setting
Press “Wireless network” and display setting screen
Follow the directions on screen to complete the setting
Wireless network
select
Please choose connection method:
OK
Search for wireless networks
WPS (Wi-Fi Protected Setup using push button)
WPS (Wi-Fi Protected Setup using PIN number)
Manual settings
* Wi-Fi Protected Setup is an easy setting of the Wi-Fi
Alliance’s certification
● For more details on setting of an Access point, please
refer to operating manual for the Access point.
IP address/DNS settings
Select “IP/DNS setting mode” and set to
“Automatic”
(When IP/DNS automatic acquisition in DHCP can be
used)
Menu
select
IP address/DNS settings
IP setting mode
IP address
Automatic
192.168.0.5
Subnet mask
255.255.255.0
Default gateway
192.168.0.254
DNS setting mode
DNS
Automatic
OK
■ Manual setting
Select “IP/DNS setting mode” and set to “Manual”
Select the item and press OK
Check the specifications of the broadband router and
enter each IP address.
Or Enter each IP address as was specified by the
provider
IP address
0 .
10I
0OK
.
0 .
Using Network services
Search for Wireless networks:
Select an access point from the ones searched for
automatically, and configure the settings as instructed
on the screen.
WPS (Wi-Fi Protected Setup* using push button):
You can connect the Access point to press the
buttons.
WPS (Wi-Fi Protected Setup using PIN number):
Set the PIN code that is displayed on the TV on the
Access point.
Manual settings:
Manually set SSID, Security type, and Encryption type
to match the settings of the Access point to which to
connect.
● When connecting by 11n (5 GHz), select “AES” as the
Encryption type for the wireless LAN.
0
192.168.0.20
The acquired address is displayed.
Each IP address is acquired automatically
Advanced
If you are using a broadband router, IP automatic
acquisition in DHCP can be used under normal
circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for
each device.
Proxy setting
Set only if specified by the provider. It is not required for normal household use.
■ Proxy address
Select “Proxy setting”
Menu
select
IP address/DNS settings
IP setting mode
Automatic
IP address
192.168.0.5
Subnet mask
255.255.255.0
Default gateway
192.168.0.254
DNS setting mode
DNS
OK
Automatic
192.168.0.20
Proxy setting
Proxy setting
select
Proxy address
Proxy port
■ Proxy port
This number is specified by the provider together with the
Proxy address.
Select item and press OK
Menu
This is the address of the relay server that is connected
to the target server instead of the browser and sends
data to the browser. Setting is only required if specified
by the provider.
0
OK
Enter address or port number and press OK
● Entering characters (p. 19)
41
Network link
■ Edit the name of this TV
■ Switches DLNA remote control (Disable/Enable)
Sets your favorite name for this TV. This name
will be used to display the name of this TV on
the screen of the other Network compatible
equipment.
Switches DLNA remote control “Disable” or “Enable”
DLNA remote control
Enable
select
Select “VIERA network name”
Menu
select
Network link
VIERA network name
VIERA
DLNA remote control
Enable
DLNA remote volume control
Enable
Network remote control
Enable
OK
■ Volume setting in DMR operation (Disable/Enable)
Sets volume setting in DMR operation
• Available only when “Enable” is selected in “DLNA remote
control”
DLNA remote volume control
Enable
Edit the name and press OK
select
Entering characters (p. 19)
■ Switches Network remote control (Disable/Enable)
Switches remote control of network device such as a
smartphone to “Disable” or “Enable”.
Network remote control
Enable
select
Network cameras list
Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press “Network cameras list” and
display screen
Start camera search.
Set Network camera setting
select
Network cameras list
Camera name
Model
Status
Camera 1
BL-C210A
Connected
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Select
Default
Delete camera information.
Disconnect to camera.
“Disconnected” will be displayed in “Status”.
Set to default use.
Displayed “(Default)” next to camera name.
OK
RETURN
Find cameras
Disconnect
● Before you start to search for a camera, switch the
camera to registration mode.
● Search condition also depends on “Network settings”
Delete
Default camera
● For this operation, please refer to the operating
manual for the Network camera.
(Available only when reconnecting)
Connect to Camera. “Connect” will be displayed in
“Status”.
Software update
Select “Software update”
Menu
Network settings
select
● Set “Clock” first. (p. 15)
Connection test
Network connection Wireless (WiFi)
Wireless network
IP address/DNS settings
Network cameras list
Software update
Mac address
42
00-0b-97-7c-65-e9
Press OK to start the Software update screen
Follow directions on the screen
OK
VIERA Connect (Enjoy Internet Service)
You can access Internet services from the VIERA Connect Home screen.
● You need a broadband environment to use this service.
Preparations
● Network connections (p. 39)
● Network settings (p. 40-42)
Display the Home screen
Select the item and press OK
select
■ Press to exit from
Video communication (e.g. Skype™)
requires an exclusive Communication
Camera TY-CC10W (p. 8).
MORE
BACK
a menu screen
■ Press to go back to
the Home screen
This screen is an example. It varies according to the usage conditions.
* Depending on the usage conditions, it may take a while to read all the data.
• VIERA Connect allows you to access only to websites supported by Panasonic and
has no full browser function.
• VIERA Connect contents are subject to change without notice.
• Not all VIERA Connect contents are available depending on the country and area.
• 3D images are not displayed on center of the home screen depending on the signal.
Using Network services
view
■ Using USB keyboard
● Keyboard type (p. 53)
● Operate USB keyboard/Entering characters (p. 19)
Other settings
■ Adjust the Picture, Audio and 3D settings
In
Display “Menu”
Picture
1/2
Reset to defaults
Vivid
Picture mode
Select the item
Menu
select
Audio
VIERA Link
20
Contrast
0
Brightness
0
Color
0
Tint
0
Sharpness
0
adjust
example: Picture menu
Picture menu/Audio menu (p. 49-51)
3D settings (p. 25)
select
OK
VIERA Link control
Recorder
Set
select
■ Use VIERA Link function
Picture
3D settings
Back light
Advanced
(Also available Game pad)
change
Speaker output
TV
Back to TV
VIERA Link menu (p. 36)
43
Using DLNA feature
You can share the contents (Photo, Video, Music etc.) stored in DLNA Certified media server with your home network system.
Preparations
● Network connections (p. 39)
● Network settings (p. 40-42)
Display VIERA TOOLS
Select the “DLNA”
select
next
Select server
Display available server.
select
DLNA server
A
5
g
● To display Information
SERVER1
SERVER2
SERVER3
next
Select
SUB
MENU
OK
RETURN
Info
3
(DLNA server list)
Total listed number
Available DLNA servers
Select contents
Display contents of selected server.
DLNA server
SERVER1 > Photos > All photos
■ Press to exit from
a menu screen
Size:
3648x2736
Screen format
JPEG
Select
SUB
MENU
OK
RETURN
P000102
P000135
P000180
P000214
P000251
P000276
P000293
M10025
M10042
M10054
M10078
2008-10-05
2008-11-20
2008-12-07
2008-12-10
2008-12-19
2008-12-25
2009-01-06
2009-01-12
2009-01-20
2009-01-28
2009-02-09
Info
09:54
13:18
11:31
15:20
12:39
14:06
13:52
15:56
10:08
14:48
19:58
to the previous
screen
Contents type (File list)
Thumbnail
next
● To display “Slideshow
settings” (p. 28) (photo
only)
● To display Optional
menu
View/Play
See “Using Media player” to operate. (p. 26-31)
44
● To display Information
28
Slideshow
■ Press to go back
select
Network Camera
You can operate the Network camera from the TV remote and also check the images from the Network
camera on your TV.
● VIERA Link control only with the TV’s remote control (p. 37)
Preparations
● Network connections (p. 39)
● Network settings (p. 40-42)
● Before connecting the Network camera to the TV, please complete “IP setting” and run
“Connection test”
With all connected equipment turned on
Display “VIERA Link” menu
● If there is no registered camera displayed, please set it in
Network Camera settings. (p. 42)
● There is also an option to start with sensor detection.
select
VIERA Link control
Network camera
Speaker output
OK
TV
Back to TV
View
● Default camera setting (p. 42)
4 split screen
Multi screen
(1/4)
Camera name
Camera 1
Model
select
BL-C210A
Select
Using Network services
Select “Network camera”
OK to Single screen
OK
RETURN
4 cam / 8 cam
9 split screen
(1/9)
Camera name
Camera 1
Model
select
BL-C210A
OK 1 - 9
Select
OK to Single screen
RETURN
4 cam / 8 cam
Advanced
Multi screen
■ Press to exit from
a menu screen
Single screen
Navigation area
Single screen
■ Press to go back
to the previous
screen
Camera name
Camera 1
Model
Tilt
Pan
Tilt
1 0
RETURN
9
Pan
RETURN
BL-C210A
Preset position
Home position
1 0
9
Preset position
Home position
Note
● A number of VIERA-compatible network cameras can be found at the following sites:
http://www.panasonic.com/
http://panasonic.net/pcc/products/netwkcam/
● For more details on setting and operation of the Network camera, please also read
the operating manual for the Network camera.
45
Editing and Setting Channels
The current channel settings can be changed according to your needs and reception conditions.
ANT/Cable setup and operation
Display the menu
Select “Setup”
Menu
Setup
1/2
3D settings
next
Channel surf mode
All
select
Language
Clock
ANT/Cable setup
Input labels
Network settings
VIERA Link settings
Select “ANT/Cable setup”
Menu
Setup
1/2
3D settings
next
Channel surf mode
All
select
Language
Clock
ANT/Cable setup
Input labels
Press to exit from
a menu screen
Network settings
VIERA Link settings
Auto program (Set automatically)
Automatically searches and adds available channels to the memory.
Select “ANT in”
Select a scanning mode (p. 14)
Select “Cable” or “Antenna”
Or select “Not used”.
Menu
All channels
Analog only
select
ANT/Cable setup
ANT in
Auto program
Cable
next
Manual program
Signal meter
46
OK
Digital only
Select “Auto program”
Menu
Auto program
select
● After the scanning is completed, select “Apply”.
(see p. 47 ).
● All previously saved channels are erased.
Manual program (Set manually)
Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in “Channel surf mode”(p. 53)
Edit
● Caption
Edit CH caption
Channel
Select
Apply
Favorite
Add
...
Yes
3
...
...
Yes
4
...
...
Yes
5
...
...
select
next
Caption
Select or edit the station identifier.
(maximum 7 characters available)
Yes
6
Y
● Favorite
Select the item to edit
Set favorite
Manual program
Apply
select the item
to edit (Caption/
Favorite/Add)
Cancel
2
Caption
...
...
Yes
3
...
Favorite
...
Add
Yes
4
...
...
Yes
5
...
...
Yes
6
...
...
Yes
Favorite
...
Yes
...
...
Yes
Caption
Add
...
...
Yes
8
9
Select
OK
3
Set favorite Select the number
Proceed to
next page
Go back to the previous
page
● Add
• Caption:
Changes the station
•
Next page
set
next
RETURN
Prev.page
select
2
...
7
1/3
26-1
1
•
Press OK to select “Yes (add)” or “No (skip)”
identifier
Favorite:
Registers channels to the
Favorite List
Add:
Adds or skips channels
Move the cursor to a channel number
Manual program
Edit
Apply
2
Channel
Caption
...
3
...
Cancel
Favorite
Editing and Setting Channels
2
Channel
Delete
Cancel
Caption
...
Edit
RETURN
ABC → abc
Manual program
Edit
set
OK
Select “Edit”
Channel
or
change
80-101
@ D---A
Caption
select
Add
...
Yes
...
Yes
press OK to tune
to the channel.
Select “Apply”
Apply
el
Caption
...
Cancel
Favorite
...
select
Add
Yes
OK
Advanced
l program
To cancel the Edit
Changes will be lost. Continue?
Manual program
Edit
Channel
Apply
2
Caption
...
3
4
5
Cancel
Favorite
Yes
Add
...
Yes
...
...
Yes
...
...
Yes
...
...
Yes
No
select
next
OK
(returns to “ANT/
Cable setup”)
select “Yes”
Signal meter (Check signal strength)
Check the signal strength if interference is found or freezing occurs on a digital image.
Menu
● If the signal is weak, check the antenna.
Signal meter
--
Channel
If no problem is found, consult your local dealer.
Tune manually
or
Signal strength
Current
86%
Peak level
98%
Signal intensity
change
channel
OK
Note
● Not available if “Cable” is selected in “ANT in” (see p. 46).
● Available only for digital antenna channels.
47
How to Use Menu Functions
Various menus allow you to set the picture, sound, and other functions so that you can enjoy watching TV
best suited for you.
Display the menu
● Shows the functions that can be adjusted.
● Some functions will be disabled depending on
the type of input signal.
Menu structure
Menu
Menu bar
Press OK to move to the Menu items.
Input labels
HDMI 1
HDMI 2
HDMI 3
Menu items
Press OK to proceed to the next
screen if available.
HDMI 4
Component
Video
PC
Select or enter the name of the device
connected to the HDMI 1 terminal.
Help information
Select
Change
Operation guide
RETURN
Customize label
(example: Input labels)
Select the menu
Menu
Picture settings
Audio settings
Timer (Sleep, On/Off timer)
Lock (Channel, Game, Program etc.)
Closed Caption setting
Setup (other settings)
Press to exit from
a menu screen
Select the item and adjust
Menu
Picture
1/2
Reset to defaults
Vivid
Picture mode
Press to go back
to the previous
screen
Back light
20
Contrast
0
Brightness
0
Color
0
Tint
0
Sharpness
0
(example: Picture menu)
48
adjust
or
select
● “Reset to default” will be grayed out if no changes are made in the following menus:
“Picture”, “Pro settings”, “PC adjustments”, “Audio” and “Closed caption”.
Picture settings
Adjust the image or picture quality
Settings
Items
Reset to defaults
Picture mode
Vivid
Standard
Cinema
Game
Custom (Photo)
Back light
Cool/Normal/Warm
Off/On
Off/On
Off/On
Off/On
Reset to defaults
W/B high R, B
W/B low R, B
Red, Green, Blue hue
Red, Green, Blue
saturation
Color detail
adjustment
Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
Recommended for normal viewing conditions with subdued room lighting.
For watching movies in a darkened room. It provides a soft, film-like picture.
For playing video games.
Customizes each item according to your taste.
Photo is displayed in JPEG menu.
Adjusts the luminance of the back light.
3D mode: (Minimum(0)/Medium(50)/Maximum(100))
Adjusts the color, brightness, etc. for each picture mode to suit your taste
• Display range
Contrast/Brightness/Color/Sharpness : 0 - 100
Tint
: -50 - +50
Selects a choice of Cool (blue), Normal, or Warm (red) color.
On: Enhances green and blue color reproduction, especially outdoor scenes.
Controls dark areas without affecting the black level or brightness in the overall picture.
Automatically adjusts the screen brightness according to the ambient lighting condition.
Reduces noise, commonly called snow. Leave it off when receiving a strong signal.
Resets all Pro setting adjustments to factory default settings.
Adjusts the white balance for light red/blue areas.
Adjusts the white balance for dark red/blue areas.
Adjusts the hue of red/green/blue areas.
Adjusts the saturation of red/green/blue areas.
Yellow, Cyan,
Magenta hue
Yellow, Cyan,
Magenta saturation
Red, Green, Blue,
Yellow, Cyan,
Magenta luminance
Adjusts the hue of yellow/cyan/magenta areas.
Adjusts the saturation of yellow/cyan/magenta areas.
Adjusts the luminance of red/green/blue/yellow/cyan/magenta
areas.
Adjusts the dark shades of the image in gradation.
1.8/2.0/2.2/2.4/2.6 Gamma correction. Adjusts the intermediate brightness of the image.
Selects the display panel brightness.
High/Mid/Low
Adjusts the contour emphasis of the image.
Off/On
0-15
Advanced
Black extension
Gamma adjustment
Panel brightness
Contour
emphasis
AGC
Save as default
Resets all picture adjustments to factory default settings except for “Advanced picture”.
How to Use Menu Functions
Contrast, Brightness,
Color, Tint,
Sharpness
Color temp.
Color mgmt.
A.I. picture
C.A.T.S.
Video NR
Pro settings
(Adjust the
“Picture mode”
setting in more
detail.)
Item Description
Increases the brightness of dark signal automatically.
Save all “Picture” (when “Picture mode” is “Custom”) and “Pro
settings” adjustment.
• Some menus are grayed out depending on the input signal or condition.
(e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.)
Changes the format (aspect ratio).
Aspect
Screen format
FULL/H-FILL/
adjustments
JUST/4:3/ZOOM Lets you choose the aspect depending on the format of
received signal. (p. 55)
Selects between 95 % (Size 1) or 100 % (Size 2) for the
scanning area with High-definition signal.
Select “Size 1” if noise is generated on the edges of the screen.
Size 1: Selected item for “HD size”. Scanning 95 %
Size 2: Selected item for “HD size”. Scanning 100 %
Adjusts the horizontal display range to reduce noise of both side
H size
Size 1/Size 2
edges of an image.
Size 2: Adjusts the image size according to the aspect mode to
reduce noise. (p. 55)
Zoom adjustments Adjusts vertical alignment and size when aspect setting is “ZOOM”.
HD size
Size 1/Size 2
•
•
49
Settings
PC adjustments
Items
Item Description
Reset to defaults Resets PC adjustments.
The H and V sync signals are input from the HD/VD connector. (p. 58)
Sync
H&V
Uses a synchronized signal on the Video G signal, which is
On green
H-position
input from the G connector. (p. 58)
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or
is blurred.
Adjusts the horizontal position.
V-position
Adjusts the vertical position.
Dot clock
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase
so that a clear picture appears.
● It may not be possible to display a clear picture due to poor input signals.
Switches to wide display.
Input
● VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),
resolution
WXGA (1,280×768 pixels)
● Options change depending on signals
Displays the H (Horizontal)/V (Vertical) frequencies.
H-frequency
Display range
V-frequency
Horizontal:15 - 110 kHz
Vertical: 48 - 120 Hz
Prevents the blown out highlights and blocked up shadows when
HDMI/DVI RGB
Auto/
a wide-range signal is received. Selects between standard RGB
range (HDMI 1-4) Standard
range (16-235 bits) or non-compliance (0-255 bits).
(16-235)/
Auto: Switches the RGB range (Standard (16-235)/Nonstandard)
Nonstandard
depending on the HDMI signal information.
Contents type
Off/Auto/Photo/ Sets content type to each HDMI input.
Auto: Switches content type automatically depending on the
(HDMI 1-4)
Graphics
HDMI signal information.
Photo: Best setting for JPEG viewing.
Graphics: Best setting for On-Screen display of connected
equipment.
Clock phase
HDMI settings
• Some menus are grayed out depending on the input signal or condition.
(e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.)
Minimizes noise and cross-color in the picture.
Advanced
3D Y/C filter
Off/On
picture
Selects image resolution of component-connected devices.
Color matrix
SD/HD
50
Block NR
Mosquito NR
Off/On
Off/On
Motion Picture
Pro 5
Black level
3:2 pulldown
24p Direct in
(3D mode only)
Off/Weak/Strong
Dark/Light
Off/On/Auto
60Hz/48Hz
SD: Standard Definition
HD: High Definition
Only used with 480p video signal.
Reduces noise of specific digital signals of DVD, Cable box, etc.
Reduces HDTV flicker noise in the contoured sections of an
image.
Improved moving picture quality by reducing motion blur.
Selects Dark or Light. Valid only for external input signals.
Adjusts the picture recorded in 24 fps for optimum quality.
48Hz: Achieves more cinematic playback by reproducing the
movie contents at twice the speed of 24 frames per second.
Audio settings
Adjust Audio quality
Settings
Items
Reset to defaults
Bass
Treble
Balance
Advanced audio A.I. sound
Item Description
Resets Bass, Treble, and Balance adjustments to factory default settings.
Increases or decreases the bass response.
Increases or decreases the treble response.
Emphasizes the left / right speaker volume.
Off/On
Equalizes overall volume levels across all channels and
external inputs.
Surround
Off/On
Enhances audio L/R response when listening to stereo.
Bass boost
Off/On
Enhances bass sound and provides powerful sound.
Volume leveler
Minimizes volume disparity after switching to external inputs.
Off/On
HDMI 1-4 in
Digital/
Component/
Video
Timer settings
Switches to “Off” when using external speakers.
Off: “A.I sound”, “Surround”, “Bass boost” and “Volume leveler”
do not work if “Off” is selected.
The default setting is “Digital” for the HDMI connection. (Digital
input signal)
Select audio input terminal when DVI cable is connected.
(Analog audio input signal)
The TV can automatically turn On/Off at the designated date and time.
If the Timer settings are grayed out, first set the clock (see p. 53) and make sure “Auto power on” is set to “No” (see p. 53)
Settings
Sleep (Off timer)
Timer 1-5
(On/Off timer)
Items
Sleep (minutes)
Timer set
Inputs
Channel
Day
On time
Select how long for the TV to automatically turn off.
Enables or disables this timer. (Off/On)
Sets the input to select when the TV turns on.
Sets the channel to select when the TV turns on.
Sets the day when the TV turns on.
[SUN/MON/TUE/WED/THU/FRI/SAT(displays the nearest future date)
MON-FRI/SAT-SUN/DAILY/Every SUN/Every MON/Every TUE/Every
WED/Every THU/Every FRI/ Every SAT]
Sets the time when the TV turns on. The TV will turn off after 90 minutes or as
specified.
Sets the time when the TV turns off within 24 hours.
Advanced
Off time
Item Description
Off/15/30/60/90
How to Use Menu Functions
TV speakers
51
Lock
Locks specified channels or shows to prevent children from watching objectionable content.
You will be asked to enter your password each time you display the Lock menu.
• Password setting/entering (p. 19)
Set “Custom” in “Mode” to specify “Channel”, “Game”, “Program” and “VIERA Connect” settings.
Settings
Mode
Channel
(These channels
will be blocked
regardless of the
program rating.)
Game
Program
(To set a rating
level)
VIERA Connect
Items
Off
All
Item Description
Unlocks all the Lock settings of “Channel”, “Game”, “Program” and “VIERA Connect”.
Locks all the inputs regardless of the Lock settings of “Channel”, “Game”, “Program”
and “VIERA Connect”.
Locks specified inputs of “Channel”, ”Game”, “Program” and “VIERA Connect”.
Custom
Mode
Channel 1-7
On/Off
Mode
MPAA
U.S.TV
C.E.L.R.
C.F.L.R
On/Off
Set channel lock status. (Off/All/Custom)
All: Locks all channels
Off: Unlocks all channels
Custom: Locks specified channels. Set “Channel 1” - “Channel 7”
Select a channel to lock. (Select up to 7 (1-7) channels to block.)
Locks Channel 3, Channel 4, and external inputs.
Set program lock status. (Off/On) “V-chip” technology enables restricted shows to lock
according to TV ratings. On: Set each rating level (MPAA, US.TV, C.E.L.R., C.F.L.R.)
Select U.S. movie ratings to lock.
For more
U.S. TV program ratings.
information
Canadian English ratings.
(p. 54)
Canadian French ratings.
Locks VIERA Connect. When you access VIERA Connect, the “VIERA Connect Lock”
screen is displayed. Type the correct password to enter the Home screen.
Change the password. Input the new 4-digit password twice.
Change password
• This television is designed to support the “Downloadable U.S. Region Rating System” when available.
(Available only in U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also be blocked.
Closed caption
Display closed caption
The television includes a built-in decoder that is capable of providing a text display of the audio.
The program being viewed must be transmitting the Closed caption (CC) information. (p. 57)
Settings
Items
Reset to defaults
Mode
On/Off/
CC on mute
Analog
Digital
Item Description
Resets all Closed caption settings to factory default settings.
On: To display Closed captions.
CC on mute: To display Closed captions when the audio is muted.
(When not using, select “Off”).
Choose the Closed caption service of Analog broadcasting.
CC1-4/T1-4
CC1-4: Information related to pictures (Appears at the bottom of the screen)
T1-4: Textual information (Appears over the entire screen)
Primary/Second./ The Digital Closed caption menu lets you configure the way you choose to view
the digital captioning.
Service 3/4/5/6
Digital setting
Size
(Set display
Font
settings
Style
in digital program)
Foreground
Fore. opacity
Background
Back. opacity
Outline
Text size
Text font
Text style (Raised, Depressed, etc.)
Color of text
Opacity of text
Color of text box
Opacity of text box
Outline color of text (Identify the setting options on the screen.)
• The settings in “Analog” or “Digital” depend on the broadcaster.
52
Setup
Settings
3D settings
Channel surf
mode
Language
Clock
ANT/Cable setup
Input labels
(Display labels
of connected
devices)
Other function settings
Items
Item Description
See p.25 for more detail.
Sets the mode to select the channel with the Channel up/down button.
All/Favorite/
Favorite: Only channels registered as FAVORITE. (p. 18)
Digital only/
Analog only
Selects the screen menu language.
English/
Español/
Français
Adjusts the clock. (p. 15)
See p. 46-47 for more detail.
• You can also enter the label name directly. (Entering characters (p. 19))
Network settings
See p. 40-42 for more detail.
VIERA Link settings See p. 34-35 for more detail.
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in
ECO/energy
Power save
a dark room.
saving
(Standard/
Saving)
No signal for 10 To conserve energy, the TV automatically turns off when NO SIGNAL and NO
OPERATION continue for more than 10 minutes.
minutes
• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.
(Stay on/ Power • “No signal for 10 minutes was activated” will be displayed for about 10 seconds
TV off)
when the TV is turned on for the first time after the power was turned off by “No
Keyboard type
Advanced setup
Auto power on
(No/Yes)
Image viewer
auto play
VIERA Connect
Banner
(On/Off)
First time setup
About
Reset to defaults
Slideshow/
Photos/Videos/
Music/Set later/
Off
Advanced
No activity for 3
hours
(Stay on/ Power
TV off)
signal for 10 minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and
side panel key continues for more than 3 hours.
• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while
“PC inputs” is selected.
• “No activity for 3 hours was activated” will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by “No activity
for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard (p. 19)
(U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin
America)/Spanish (Spain))
Turns TV On automatically when the cable box or connected device is turned On.
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
How to Use Menu Functions
Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier identification during the input
selection. (Input select (p. 21))
Terminals: HDMI 1-4/Component/Video/PC
Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/
RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/OTHER/
Not used
Sets the media contents or playback type to play back SD
cards automatically.
Set later: “Image viewer settings” menu will be displayed repeatedly.
“Using Media player” (p. 26)
Sets the banner display status.
Restarts the first time setup from “Language” setting. (p. 13)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings.
• Password setting/entering (p. 19)
53
Ratings List for parental control
“V-chip” technology enables you to lock channels or shows according to standard ratings set by the
entertainment industry.
U.S. MOVIE RATINGS (MPAA)
NR
G
PG
PG-13
R
NC-17
X
NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or
where rating does not apply.
GENERAL AUDIENCES. All ages admitted.
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
ADULTS ONLY.
U.S. TV PROGRAMS RATINGS (U. S. TV)
Age-based
Group
NR
(Not Rated)
Age-based
Ratings
TV-NR
TV-Y
Youth
TV-Y7
TV-G
TV-PG
Guidance
TV-14
TV-MA
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Possible Content
Selections
Viewable
Blocked
Viewable
Blocked
FV Blocked
Viewable
Blocked
Viewable
Blocked
D,L,S,V (all selected)
Any combination of
D, L, S, V
D,L,S,V (all selected)
Any combination of
D, L, S, V
L,S,V (all selected)
Any combination of
L, S, V
Description
Not Rated.
All children. The themes and elements in this program are specifically
designed for a very young audience, including children from ages 2-6.
Directed to older children. Themes and elements in this program may
include mild physical or comedic violence, or may frighten children
under the age of 7.
General audience. It contains little or no violence, no strong language,
and little or no sexual dialogue or situations.
Parental guidance suggested. The program may contain infrequent
coarse language, limited violence, some suggestive sexual dialogue
and situations.
Parents strongly cautioned. This program may contain sophisticated
themes, sexual content, strong language and more intense violence.
Mature audiences only. This program may contain mature themes,
profane language, graphic violence, and explicit sexual content.
FV: Fantasy/Cartoon Violence. V: Violence S: Sex L: Offensive Language D: Dialogue with sexual content.
CANADIAN ENGLISH RATINGS (C. E. L. R.)
E
C
C8+
G
PG
14+
18+
Exempt - Exempt programming includes: news, sports, documentaries and other information programming,
talk shows, music videos, and variety programming.
Programming intended for children under age 8. No offensive language, nudity or sexual content.
Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content.
General programming, suitable for all audiences.
Parental Guidance suggested. Some material may not be suitable for children.
Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents
are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.
18+ years old. Programming restricted to adults. Contains constant violence or scenes of extreme violence.
CANADIAN FRENCH RATINGS (C. F. L. R.)
E
G
8 ans+
13 ans+
16 ans+
18 ans+
Exempt - Exempt programming.
General - Programming intended for audience of all ages. Contains no violence, or the violence content is
minimal or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad audience but contains
light or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one
or more sufficiently violent scenes to affect them. Adult supervision strongly suggested.
Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or
intense violence.
Programming restricted to adults. Contains constant violence or scenes of extreme violence.
Caution
54
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) as per
FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing results
may occur, and you may not receive emergency bulletins or any of the following types of programming:”
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
• Locally originated programming • News • Political • Public Service Announcements • Religious • Sports • Weather
Technical Information
Aspect Ratio (FORMAT)
Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format
of the received signal and your preference. (p. 18)
(e.g.: in case of 4:3 image)
● FULL
● JUST
JUST
FULL
Enlarges the 4:3 image horizontally to the screen’s side edges. Stretches to justify the 4:3 image to the four corners of the
(Recommended for anamorphic picture)
screen.
(Recommended for normal TV broadcast)
● H-FILL
● 4:3
H-FILL
Side bar
Enlarges the 4:3 image horizontally to the screen’s side
edges. The side edges of the image are cut off.
● ZOOM
Standard
(Note that “Image retention” of the side bar may occur from
displaying it for a long time.)
Note
ZOOM
FULL, H-FILL, JUST, 4:3 or ZOOM
Enlarges the 4:3 image to the entire screen.
(Recommended for Letter Box)
● Zoom adjustments
Vertical image position and size can be adjusted in “ZOOM”.
Select “Zoom adjustments” on the “Picture” menu. (p. 49)
V-position: Vertical position adjustment
V-size: Vertical size adjustment
● To reset the aspect ratio
(OK)
● Aspect Ratio: 4:3
Size 2
● The width will be decreased on both sides to reduce noise.
● Aspect Ratio: FULL/JUST(H-FILL/ZOOM)
Size 1
See page 49 for more information
Size 2
Support Information
H size
Size 1
Technical Information
Ratings List for parental control
● 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):
FULL, JUST, 4:3 or ZOOM
● 1080p / 1080i / 720p:
● The width will be increased on both sides to reduce noise.
55
Data format information
● Compatible Data format for Media player (SD card/USB flash memory)/DLNA p. 30
DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard
EXIF: Exchangeable Image File Format
Note
● Format the card with the recording equipment.
● The picture may not appear correctly on this TV depending on the recording equipment used.
● Display may take some time when there are many files and folders.
● The function (3D Image Viewer/Media player) cannot display Motion JPEG and still image not DCF formatted (i.e. TIFF, BMP).
● Data modified with a PC may not be displayed.
● Images imported from a PC must be compatible with EXIF 2.0, 2.1 and 2.2.
● Partly degraded files might be displayed at a reduced resolution.
● All “.JPG” extension data in the card and USB flash memory will be read in Photo viewer mode.
● The folder and file names may be different depending on the digital camera used.
● Do not use two-byte characters or other special codes.
● The card may become unusable with this TV if file or folder names are changed.
● For the suitable SD Memory Cards, please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs (This site is in English only)
Cautions when handling SD Cards
operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)
mm
2.1
32 mm
● Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
● Do not remove the card while the unit is accessing data (this can damage card or unit).
● Do not touch the terminals on the back of the card.
● Do not subject the card to high pressure or impact.
● Insert the card in the correct direction (otherwise, card or unit may be damaged).
● Electrical interference, static electricity or erroneous operation may damage the data or card.
● Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic
24 mm
SD Card/USB flash memory warning messages
Message
Meaning
No media. Please insert an SD memory card or USB
storage device.
● The device is not inserted.
No media. Device removed.
● The device is removed.
No photos/ No movies/No music files to play/ No
playable media
● The device has no data or this type of data is not supported.
Cannot read file
● The file is broken or unreadable.
● The TV does not support the format.
2D→3D (Simulated 3D)
● You can watch content in simulated 3D from photo and all video sources except the PC input.
● This function converts standard 2D images and displays them in 3D. For this reason, the 3D images appear slightly different
from the originals. Please bear this in mind when using this function.
● Using this function for profit-making purposes, or publically showing images converted from 2D to 3D in places such as coffee
shops or hotels etc. may infringe on the rights of the copyright holder protected under the Copyright Act.
56
VIERA LinkTM “HDAVI ControlTM”
HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 33)
● This function may not work normally depending on the equipment condition.
● The equipment can be operated by other remote controls with this function on even if the TV is in Standby mode.
● Image or sound may not be available for the first few seconds when playback starts.
● Image or sound may not be available for the first few seconds when input mode is switched.
● Volume function will be displayed when adjusting the volume of the equipment.
● If you connect equipment that has “HDAVI Control 2 or later” function to the TV with an HDMI cable, the sound from the
DIGITAL AUDIO OUT terminal can be output as multi-channel surround.
● “HDAVI Control 5” is the newest standard (current as of December, 2010) for the HDAVI Control compatible equipment.
This standard is compatible with the conventional HDAVI equipment.
HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and HD devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a Cable or Satellite box or a DVD player, can be
connected to the HDMI connector using an HDMI compliant (fully wired) cable.
● HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
● If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
● When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
● Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in”, “HDMI 3 in” or “HDMI 4 in” menu screen. (p. 51)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(*1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
Caution
● Use with a PC is not assumed.
● All signals are reformatted before being displayed on the screen.
● If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.
● These HDMI connectors are “type A”.
● These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
● A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, or “VIDEO” to
receive analog signals.
● The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p.
Match the output setting of the digital device.
● For details of the applicable HDMI signals, see p. 58.
DIGITAL AUDIO OUT terminal
Caution
● Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical
output.
● When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC
channel is selected, the output will be PCM.
● When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other formats, the output will be PCM.
Closed Caption (CC)
to ON within the device itself. Check with your Cable or Satellite provider for instructions. The TV’s CC button does
not operate the Satellite or Cable box’s CC function.
● If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC
may overlap on the TV.
● If a digital program is being output in analog format, the CC data will also be output in analog format.
● If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
Support Information
● For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;
characters might be cut off).
● The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set
Technical Information
You can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to the
DIGITAL AUDIO OUT terminals.
57
PC Input Terminals
● Signal Names for D-sub 15P Connector
Pin No.
11 12 13 14 15
6
7
1
9 10
8
2
3
4
5
Pin Layout for PC Input Terminal
Signal Name
R
G
B
NC (not connected)
GND (Ground)
Pin No.
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC
HD/SYNC
VD
NC
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
horizontal frequency (kHz) vertical frequency (Hz)
525 (480) / 60i
15.73
59.94
525 (480) /60p
31.47
59.94
750 (720) /60p
45.00
59.94
1,125 (1,080) /60i
33.75
59.94
1,125 (1,080)/60p
67.43
59.94
1,125 (1,080)/60p
67.50
60.00
1,125(1,080)/24p
26.97
23.98
1,125(1,080)/24p
27.00
24.00
640 × 400 @70
31.47
70.08
640 × 480 @60
31.47
59.94
Macintosh13” (640 × 480)
35.00
66.67
640 × 480 @75
37.50
75.00
852 × 480 @60
31.44
59.89
800 × 600 @60
37.88
60.32
800 × 600 @75
46.88
75.00
800 × 600 @85
53.67
85.08
Macintosh16” (832 × 624)
49.73
74.55
1,024 × 768 @60
48.36
60.00
1,024 × 768 @70
56.48
70.07
1,024 × 768 @75
60.02
75.03
1,024 × 768 @85
68.68
85.00
Macintosh 21” (1,152 × 870)
68.68
75.06
1,280 × 768 @60
47.78
59.87
1,280 × 1,024 @60
63.98
60.02
1,366 × 768 @60
48.39
60.04
COMPONENT
HDMI
*
*
*
*
*
*
*
*
*
*
*
*
PC
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Note
● Signals other than above may not be displayed properly.
● The above signals are reformatted for optimal viewing on your display.
● Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we
disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral
devices.
58
Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lintfree cloth.
If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted
by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the
display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile
substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry. Use this cloth to
wipe the cabinet and then wipe it dry with a dry cloth.
Do not allow any mild liquid dish soap to come into direct contact with the surface of the LCD TV.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet
surface may be adversely affected or the coating may peel off.
Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
Pedestal
Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small
amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.
(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)
Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with
rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Power cord plug
Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off any dust from the
cloth before use.
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.
Do not submerge the 3D Eyewear in liquid such as water when cleaning.
Avoid storing the 3D Eyewear in hot or highly humid locations.
During the long period of disuse, full charge the 3D Eyewear once every 6 months to keep the battery performance.
Note
● As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them.
Care and Cleaning
Technical Information
3D Eyewear
Support Information
59
Disposal
3D Eyewear
A lithium-ion polymer rechargeable battery is built in to the 3D Eyewear. Please discard according to local regulations.
When disposing this product, disassemble properly by following the procedure below, and remove the internal
rechargeable battery.
Do not disassemble this product except when disposing of it.
Danger
● As the rechargeable battery is specifically for this product, do not use it for any other device.
• Do not charge the removed battery.
• Do not throw the battery in a fire, or apply heat to it.
• Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it.
• Do not let the wires touch any other metal or each other.
• Do not carry or store the battery with a necklace, hair pin, or the like.
• Do not charge, use, or leave the battery in a hot location such as near a fire or under the hot sun.
Doing so may cause the battery to generate heat, ignite, or rupture.
Warning
● Do not place the removed battery, screws, and other items within reach of infants.
Accidental swallowing of such an item may have an adverse effect on the body.
• In the event that you think such an item has been swallowed, consult a doctor immediately.
● In the event of fluid leaking from the battery, take the following measure, and do not touch the fluid with bare
hands.
Fluid entering into an eye may cause loss of eyesight.
• Wash the eye with water immediately without rubbing it, and then consult a doctor.
Fluid getting on your body or clothes may cause inflammation of the skin or injury.
• Sufficiently rinse with clean water, and then consult a doctor.
How to remove the battery
Disassemble this product after the battery has run out of power.
The following figures are intended to explain how to dispose of the product, not for describing how to repair.
The product cannot be repaired once it has been disassembled.
1. Fold the part of the
frame without the power
switch, and then remove
the two screws on the
inside of the hinge with a
precision Phillips (plus + )
screwdriver.
2. Bend the frame inwards
and pull it off from the side
cover.
• If it is difficult to remove,
insert a flat-blade (minus - )
screwdriver and force it off.
Screws
Frame
Side cover
Note
● Take sufficient care when performing this work so as not
to injure yourself.
● Do not damage or dismantle the battery.
Battery
60
3. Remove the battery from
inside the side cover, and
cut the two wires one by one
with scissors.
• Insulate the wire parts of
the removed battery with
cellophane tape.
Frequently Asked Questions (FAQ)
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, visit the Panasonic website for further assistance. (see cover)
Questions
Answers
Why is there no picture or just
a blue, black or snowy screen
being displayed?
Check if the power cord is plugged in and the TV is turned
on (front red LED light should be on; not blinking)
Press the INPUT button on the remote to select the correct input source.
Ensure all connections are correct and secure.
When using external video source, such as a Cable/Satellite box or
DVD player, check that the device is on and functioning correctly.
Press MENU on the TV’s remote control. If the menu is
displayed, then the TV is working; recheck above steps.
Why doesn’t the picture look
like it is in High Definition?
Press the INFO button on the remote to confirm the type of signal
being received (p. 17). HD signal should be 720P, 1080i or 1080p.
Select a High Definition channel from your HD source
(Cable, Satellite or fiber optic service). HD channels
sometimes broadcast non-HD content.
Ensure that your HD source (HD box, Blu-ray player, etc.)
is connected to the TV with an HDMI or Component cable
and set to output an HD video signal.
Why do black bars appear on
the top and bottom and/or sides
of the screen?
Change the format (aspect ratio) of the picture by pressing
the FORMAT button on the remote control. (p.18)
Check the aspect settings on your external video source,
such as Cable/Satellite box, DVD/Blu-ray Disc player, etc.
Note: Some content, such as film-based movies, are available in
extra-wide format. Top and bottom bars are unavoidable.
Why is the picture snowy when
“ANT/Cable in” is selected?
When using a cable service (without a box), check that all
connections are secure.
When using a cable or satellite box, change the connection
(wiring) to Composite, Component or HDMI. (p.11)
If you’re using an antenna, then check that connections are
secure. Change the position or direction of the antenna and
check the “Signal meter”. (p. 47)
Why is the picture chaotic and/
or torn and/or with a buzz in the
speakers?
Check if electrical products such as kitchen appliances,
fluorescent lights or light dimmers are nearby. They may
interfere with the TV’s picture.
Try viewing a picture from another device, such as a DVD player
or a game console, to narrow down the source of the problem.
Why is there a black box on the
screen?
Change settings of Closed Caption (CC). (p. 17, 57)
Why is the screen blank and the
power indicator blinking?
The TV has gone into shutdown mode to protect itself. Try unplugging
it for a few minutes and connecting it again. If there was a temporary
power surge on the AC line it may now be OK. If the blinking returns,
call 1-877-95VIERA (U.S.A.) or 1-866-330-0014 (Canada).
Why do some small spots on
the screen remain bright or
dark?
The LCD panel is made up of a few million pixels and is
produced with advanced technology through an intricate
process. Sometimes a few pixels may be bright or dark.
These pixels do not indicate a defective panel and will have
no impact on the performance of the TV.
Support Information
Press the INPUT button on the remote to select the correct
input source.
Check that the device is turned on and functioning
correctly.
Frequently Asked Questions
Disposal
Picture
How do I view the picture from
devices such as a: Cable/
Satellite box, game console,
Blu-ray or DVD player?
61
Questions
Sound
Other
Networking
62
Answers
Why is there no sound coming
from the TV?
Make sure the volume is up and MUTE is off.
Confirm the TV speakers are set to ON by pressing MENU and
selecting “Audio” --> “Advanced audio”. (p. 51)
Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control. (p. 17)
If the TV is connected to a Panasonic Home Theater via HDMI
cable, then check VIERA Link controls. (p. 37)
If the TV is connected to a Home Theater via optical cable,
then: Check the connection, the audio system is on, the
correct input is selected.
Check “HDMI 1 in”, “HDMI 2 in”, “HDMI 3 in” or “HDMI 4 in”
analog/digital audio settings. (p. 51)
Why is the sound unusual,
distorted, low volume or in
another language?
Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control.
Check that all connections of external equipment connected to
the TV are secure.
When using Cable or Satellite box, check the device’s audio
settings. (example: try changing the box’s Audio Range to ‘narrow’)
Why is there a clicking, ticking or
buzzing sound coming from the
TV unit?
When TV power is turned on or shut off there are electrical
components that make a click sound. This is normal operation.
Changes in the temperature and humidity of the room may
cause thermal expansion and contraction that can produce
sounds. This is not a sign of faulty operation or a malfunction.
What is the easiest and best way
to connect a High-Definition Cable
or Satellite box to the TV?
Use an HDMI cable. It carries both digital video and audio
signal in HD. HDMI cable is the only cable needed to connect
an HD device to the TV.
Why does the CC button not
display Closed Caption?
When viewing TV via an HDMI connected device, such as a
Cable or Satellite box, CC must be enabled at the device.
Closed Caption is available only at supported TV programming.
Why does the screen and back
cover of the TV get warm?
The main unit radiates heat and some of the parts may
become hot. This is normal operation and does not affect the
performance of the set.
Ensure good ventilation.
Do not block the ventilation holes of the TV and do not place
the TV on top of other equipment.
Why doesn’t the Remote Control
work?
Check that the batteries are fresh, are of the same type and
are installed with the correct polarity (+ & -).
To operate other devices, such as changing channels when
using Cable or Satellite boxes or operating non-Panasonic Bluray players, use the remote supplied with the device.
Why is the “ANT/Cable” option at
the top of the “Input select” menu
gray-out and cannot be selected?
During “First time setup”, you indicated in step - that you
are using Cable or Satellite box and in step - b that the
box is connected to one of the TV’s AV inputs. In this case, the
Antenna/Cable input is deactivated to prevent unintentional
switching into unused tuner. To re-activate, press MENU,
select SETUP and repeat “First time setup”.
Some menu items are grayed-out
and cannot be selected. Why?
Depending on certain modes or the selected input, some
options are not available. For example, Zoom adjustments are
only available when the FORMAT is changed to zoom mode.
How do I get VIERA Connect to
work on my TV?
1. You need a broadband (high speed) Internet service with a
speed of no less than 1.5 Mbps (p. 39).
2. Connect the TV to the Internet through your router by an
Ethernet cable or a Panasonic Wireless LAN Adapter (included).
3. Run the “Connections Test”, under the Network Settings menu.
If Connection test fails, then check with your Internet service
provider or router/modem manufacturer if there are firewall,
content filter or proxy settings that may block the TV from
accessing the Internet.
Questions
Answers
Networking
How do I check for the latest
software (firmware) version for
my TV?
In the main menu, select “Setup”. Highlight “Network Settings”
and press OK. Select “Software Update”. The current version
and latest version software will be shown. If software update
is “grayed out”, the TV is not connected to the Internet. If
newer version is available, update your TV. Follow the onscreen instructions, do not power off the TV until the update is
complete. Be patient; firmware update may take a while.
Can I use any USB WiFi adapter to
connect the TV to my wireless network?
The TV’s internal software was designed to work with
Panasonic’s Wireless LAN Adapter (included).
How do I reset my TV to all factory
defaults and settings?
In the main menu, select “Setup”. Highlight “Reset to Defaults”
and press OK. Enter your password (if created earlier) or
create a temporary new password. Select Yes to reset the TV.
Can I download new apps
(content & services) into my
VIERA Connect TV?
Yes. Select the “VIERA Connect Market” item in the middle
bottom of the VIERA Connect home screen. “VIERA Connect
Market” allows you to find and install the applications to
“VIERA Connect” home screen. (p. 43)
When selecting some 3D video
content, why are there two
pictures next to each other?
There are a few different 3D formats and the current setting may
not match the incoming 3D signal. The format should change
automatically, but depending on the source/connection it may not
signal the TV properly. To manually select other 3D formats:
1. Press “3D” button directly or press VIERA TOOLS button on
the TV’s remote control and select “3D”
2. In the “3D format select” menu, choose another 3D format
such as “side by side” or “top and bottom”.
3. Remember to switch the 3D format setting back to “AUTO”
when you go back to viewing a standard 2D signal.
3D
Why does the power on the 3D
Eyewear (glasses) turn off by itself?
The 3D format has two different “phases”. Try the other phase:
1. In the main menu, select “Setup”. Highlight “3D setting” and press OK.
2. In the “3D Settings” menu, select “Left/Right Swap”
Can I use 3D glasses similar to the
kind given at a 3D movie theater to
watch 3D content on my 3D TV?
No. Movie theater’s 3D glasses are passive. They use a simple
filter ‘lens’. Panasonic 3D Eyewear are actively synchronizing
the left/right eye viewing with the display, providing a superior
3D viewing experience.
The battery of 3D Eyewear does
not charge, or operation time is
short when charged.
Is the charging cable connected properly?
Check the connection.
Is the television power off?
Turn the television power on, and charge the battery.
The battery has reached the end of its lifespan.
If operation time is very short even when the battery is
charged, the battery has reached the end of its lifespan.
Please consult with the place of purchase.
Support Information
Why does the left and right sides
of the image seem reversed?
The 3D Eyewear receives special synchronizing infrared signals
from the TV. If no signal is received within 5 minutes, the 3D
Eyewear automatically turns itself off to save power. Ensure that no
objects are blocking the path between the 3D Eyewear and the TV.
Frequently Asked Questions
Why doesn’t my 3D video source
looks 3D?
1. Begin playing the 3D video source.
2. Ensure that the Panasonic 3D Eyewear (glasses) are on
(check the glasses battery)
3. Press “3D” button directly or press the VIERA TOOLS button
on the TV’s remote control and select “3D”
4. In the “3D format select” menu, select “3D”.
Notes:
1. 3D Blu-ray discs must be played with a 3D capable Blu-ray player.
2. Check with your Cable or Satellite provider if their supplied box
is 3D capable.
3. 3D signal must be connected to the TV via an HDMI cable.
63
Specifications
TC-L32DT30
Power Source
TC-L37DT30
AC 110-127 V, 60 Hz
Power
Consumption Display panel Sound
Rated Power
Consumption
106 W
129 W
Standby condition
0.2 W
0.2 W
Aspect Ratio
(No. of pixels)
16:9
32” class
(31.5 inches measured diagonally)
27.5 ” × 15.4 ” × 31.5 ”
(698 mm × 392 mm × 800 mm)
2,073,600 (1,920 (W) × 1,080(H))
Speaker
1-way 2 bottom SP System
Audio Output
20 W [10 W + 10 W] (10 % THD)
VGA, SVGA, XGA, WXGA, SXGA
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Visible screen size
(W × H × Diagonal)
PC signals
Channel CapabilityATSC/NTSC (Digital/Analog)
Operating Conditions
VIDEO IN
Connection Terminals
COMPONENT IN
HDMI 1-4
USB 1-3
37” class
(37.0 inches measured diagonally)
32.2 ” × 18.1 ” × 37.0 ”
(819 mm × 460 mm × 940 mm)
[5,760 × 1,080 dots]
VHF/ UHF: 2 - 69, CATV: 1 - 135
Temperature:
32 °F – 95 °F (0 °C – 35°C)
Humidity: 20 % – 80 % RH (non-condensing)
VIDEO:
RCA PIN Type × 1 1.0 V[p-p] (75 Ω)
AUDIO L - R:
RCA PIN Type × 2 0.5 V [rms]
Y:
1.0 V [p-p] (including synchronization)
PB, PR:
±0.35 V [p-p]
AUDIO L-R:
RCA PIN Type × 2 0.5 V [rms]
TYPE A Connector × 4
This TV supports “HDAVI Control 5” function.
USB 2.0 Type A connector x 3 (DC5V MAX500mA)
•
LAN (for VIERA Connect) RJ45 (10BASE-T/100BASE-TX)
D-SUB 15PIN:
R,G,B / 0.7 V [p-p] (75 Ω)
PC
HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
SD CARD slot × 1
Card slot
Including TV stand
PCM / Dolby Digital, Fiber Optic
3D Y/C FILTER
CLOSED CAPTION
V-Chip
VIERA connect
3D IMAGE VIEWER
Media player
HDAVI Control 5
29.6 ” x 19.8 ” x 9.1 ”
34.5 ” x 22.5 ” x 10.3 ”
(751 mm x 502 mm x 230 mm)
(874 mm x 570 mm x 260 mm)
29.6 ” x 18.5 ” x 1.3 ” (2.9 ”)
34.5 ” x 21.2 ” x 1.3 ” (2.9 ”)
(751 mm x 468 mm x 33 mm (72 mm))
(874 mm x 536 mm x 33 mm (72 mm))
34.2 lb. (15.5 ) NET
28.7 lb. (13.0 ) NET
TV Set only
22.1 lb. (10.0
DIGITAL AUDIO OUT
FEATURES
Dimensions Mass
(W × H × D)
Including TV stand
TV Set only
) NET
27.6 lb. (12.5
[TC-L32DT30]
[TC-L37DT30]
1.3 ”
(33 mm)
34.5 ” (874 mm)
1.3 ”
(33 mm)
22.5 ” (570 mm)
21.2 ” (536 mm)
19.8 ” (502 mm)
18.5 ” (468 mm)
29.6 ” (751 mm)
) NET
13.8 ”
(350 mm)
2.9 ”
(72 mm)
9.1 ” (230 mm)
14.8 ”
(375 mm)
2.9 ”
(72 mm)
10.3 ” (260 mm)
Note
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
64
3D Eyewear
Lens type
Liquid Crystal Shutter
Usage temperature range
32°F - 104°F (0 °C - 40 °C)
Charging power supply
DC 5 V (supplied by USB terminal of a Panasonic TV)
Battery
Lithium-ion polymer rechargeable battery
DC 3.7 V, 70 mAh
Operation time*1: Approx. 30 hours
Charging time*1: Approx. 2 hours
Viewing range*2
Transmitter for 3D Eyewear
Within 10’5” (3.2 m) from front surface
(Within ± 35° horizontal, ± 20° vertical)
Materials
Main body: Resin
Lens section: Liquid crystal glass
6.70 ” (170.1 mm)
Dimensions
Width
(not including
1.63 ” (41.2 mm)
Height
nose pad part)
Overall length 6.69 ” (169.8 mm)
Mass
Approx. 0.09 lb. (Approx. 39 )
1
* Operation time/charging time
The battery deteriorates after repeated use, and the operation time eventually becomes short. The figures above are at
shipping from the factory, and are not a guarantee of performance.
2
* Viewing range
The location of the 3D Eyewear transmitter (p. 12)
There are differences in the viewing range of the 3D Eyewear among individuals.
The 3D Eyewear may not operate correctly at the outside of the viewing range.
Wireless LAN Adapter
Tx 1, Rx 2
Interface
USB 2.0
Standard Compliance
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system
MISO-OFDM system, OFDM system, DSSS system
Frequency Range
IEEE802.11n / IEEE802.11a :
5.150GHz - 5.725 GHz for EU Countries
5.150GHz - 5.850 GHz for USA, Canada
5.250GHz - 5.850 GHz for Taiwan
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.412 GHz - 2.472 GHz for EU countries
2.412 GHz - 2.462 GHz for USA, Canada, Taiwan
Transfer rate (standard) *
IEEE802.11n: Tx Max. 150Mbps, Rx Max. 300Mbps
IEEE802.11g / IEEE802.11a: Max. 54Mbps
IEEE802.11b: Max. 11Mbps
Access Mode
Infrastructure mode
Security
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64bit/128bit)
Dimension (WxHxD)
1.18 ” x 0.42 ” x 3.73 ” ( 30.00 mm x 10.72 mm x 94.85 mm)
Mass
0.88 oz (25 ) Net
* Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or
connected equipment.
Support Information
Antenna
Specifications
Power supply
DC 5V (USB powered) 500mA
65
This product incorporates the following software or technology:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software developed by the Independent JPEG Group,
(4) the software developed by the FreeType Project,
(5) the software licensed under the GNU LESSER General Public License (LGPL) and/or,
(6) open sourced software other than the software licensed under the LGPL.
(7) Windows Media digital right management technology (WM-DRM) licensed by Microsoft Corporation or its affiliates.
For the software categorized as (5), please refer to the terms and conditions of LGPL, as the case may be at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by several individuals.
Please refer to the copyright notice of those individuals at
http://www.am-linux.jp/dl/DTV11U/
The LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY,
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third parry who contact us at the contact information
provided below, for a charge no more than our cost of physically performing source code distribution, a complete machinereadable copy of the corresponding source code covered under LGPL.
Contact Information
cdrequest@am-linux.jp
Source code covered under LGPL is also freely available to you and any other member of the public via our website below.
http://www.am-linux.jp/dl/DTV11U/
For the software categorized as (5) and (6), please refer to the applicable license terms included in the “Setup” menu on product.
Further, for WM-DRM categorized as (7), please be aware of the following.
(a) This product is protected by certain intellectual property rights of Microsoft.
Use or distribution of this technology outside of this product is prohibited without a license from Microsoft or an authorized
Microsoft subsidiary.
(b) Content providers are using the digital rights management technology for Windows Media contained in this device
(“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including
copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content
(“WM-DRM Software”). If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content
(“Secure Content Owners”) may request that Microsoft revoke the WM-DRM Software’s right to acquire new licenses to copy,
display and/or play Secure Content.
Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software
is sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft may, in
conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners.
66
Index
A
B
C
D
E
F
H
I
L
M
R
S
Support Information
P
Sleep ...................................................................... 51
Specifications ......................................................... 64
Store Demonstration .............................................. 13
Sub menu .............................................................. 18
T Technical Information ........................................ 55-58
Timer ...................................................................... 51
U USB ................................................................. 26, 64
V VIERA Connect .......................................... 20, 38, 43
VIERA Link .................................................. 20, 32-37
VIERA TOOLS ....................................................... 20
Viewing 3D images ........................................... 24-25
Viewing contents .................................................... 27
Volume ................................................................... 12
W Warranty .......................................................... 68, 70
Watching TV, DVD, Blu-ray, etc. ...................... 17, 21
Wireless LAN Adapter ...................................... 16, 39
Z Zoom ................................................................ 18, 55
3 3D ............................................................... 12, 22-25
3D Eyewear ............................................... 7-8, 22-23
3D settings ............................................................. 25
Index
N
Accessories ......................................................... 7, 8
Ant/Cable ......................................................... 14, 46
Antenna ........................................................... 10, 14
Audio ...................................................................... 51
Audio, Advanced .................................................... 51
Auto Power ON ...................................................... 53
Auto Program ......................................................... 46
Battery ..................................................................... 8
Blinking LED .......................................................... 61
Cable ................................................................10, 11
Care & Cleaning .................................................... 59
CC Closed Caption .................................... 17, 52, 57
Channel ........................................... 14, 17-18, 46-47
Channel Surf Mode .......................................... 18, 53
Clock ...................................................................... 15
Colored Buttons ..................................................... 12
Component .......................................................11, 64
Composite ...............................................................11
Connections ...................................................... 10-11
Customer Services Directory ................................. 69
DLNA ......................................................... 20, 38, 44
ECO/energy ..................................................... 20, 53
Exit ......................................................................... 12
FAQ’s ................................................................ 61-63
Favorite .................................................................. 18
First Time Setup .......................................... 13-16, 53
Format ............................................................. 18, 55
HDAVI Control........................................................ 32
HDMI ...........................................................11, 57, 64
Home Use .............................................................. 13
Image Viewer Auto ................................................. 53
Info ......................................................................... 17
Input ................................................................. 21, 53
Language ......................................................... 13, 53
Last ........................................................................ 12
Lock / Parental control ..................................... 52, 54
Media player ............................................... 20, 26-31
Menu ...................................................................... 48
Movies/Video ......................................................... 30
Music ..................................................................... 31
Mute ....................................................................... 12
Network camera .................................... 37-39, 42, 45
Network services .................................. 15, 38-42, 53
Pedestal ............................................................... 7, 9
Photo ................................................................ 28-29
Picture, Advanced .................................................. 50
Picture settings ...................................................... 49
Power ..................................................................... 12
Remote Control ...................................................... 12
Reset ..................................................................... 53
Safety ....................................................................... 4
SAP ........................................................................ 17
Scan ................................................................. 14, 46
SD Card ........................................................... 26, 56
Signal Meter ........................................................... 47
67
Limited Warranty (for U.S.A. and Puerto Rico only)
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way
Secaucus, New Jersey 07094
Panasonic LCD Television
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics
Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of
original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace
it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund
will be made by the warrantor.
LCD TV CATEGORIES
Up to 42” (diagonal)
46” (diagonal) and larger
3D Eyewear
PARTS
LABOR
1 (ONE) YEAR
1 (ONE) YEAR
SERVICE
Carry-In
On-Site
Mail In
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period, there will
be no charge for parts.
You must carry-in your product or arrange for on-site service during the Limited Warranty period. If non-rechargeable batteries
are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced in the United States
or Puerto Rico. This Limited Warranty is extended only to the original purchaser of a new product which was not sold “as is”. A
purchase receipt or other proof of the original purchase date is required for Limited Warranty service.
On-Site or Carry-In Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372).
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include
removal or re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that
the product or parts of the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining replacement, please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
panacare@us.panasonic.com
When shipping the unit, carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the
original carton. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as
Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and
provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage, nor does it cover markings or retained images on the glass panel resulting from viewing fixed
images (including, among other things, non-expanded standard 4:3 pictures on wide screen TVs, or onscreen data in a stationary
and fixed location). The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other
business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized Servicer, or
damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for
lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The items
listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE LIMITED
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
68
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied
Limited Warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have others rights which vary from state to state. If a
problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If
the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed
for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT
COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Customer Services Directory (for U.S.A. and Puerto Rico)
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center;
purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web
Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-877-95-VIERA (958-4372)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web
Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
■ For hearing or speech impaired TTY users, TTY: 1-866-605-1277
Customer Services Directory (for U.S.A. and Puerto Rico)
Limited Warranty (for U.S.A. and Puerto Rico only)
■ For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Support Information
69
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and
for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with
new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase
price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Viera TV (42” & over)
In-home service
One (1) year, parts (including panel) and labour.
Viera TV (under 42”)
Carry-in service
One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic
service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include
removal or re-installation of an installed product. If removal is required to service the product, it will be at the discretion of
the Servicer and in no event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential
damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada,
which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are
also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the
Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is
not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or
the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives
you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
Our Customer Care Centre:
1-800 #:
1-866-330-0014
Email link: “Contact us → email” on www.vieraconcierge.ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
70
TC-L32DT30
32" LCD HDTV
SPECIFICATIONS
Dimensions (W x H x D)
Mass
Power Source
Rated Power Consumption
Standby condition
29.6" (751 mm) x 19.8" (502 mm) x 9.1" (230 mm)
(Including TV stand)
29.6" (751 mm) x 18.5" (468 mm) x 0.8" (1.3", 2.9")
(19 mm (33 mm, 72 mm))
(TV Set only)
28.7 lb. (13.0 kg) (Including TV stand)
22.1 lb. (10.0 kg) (TV Set only)
AC 110-127 V, 60 Hz
106 W
0.2 W
DIMENSIONS
JACKS
Side Panel
15
15
Top View
Side View
Front View
2.9 (72)
1.3 (33)
0.8 (19)
AV IN
HDMI
4
19.8 (502)
18.5 (468)
29.6 (751)
Rear Panel
2.3 (58)
13.8 (350)
9.1 (230)
Back View
7.9 (200)
7.9 (200)
Note:
To make sure that the LCD TV fits the cabinet properly when a high degree of precision
is required, we recommend that you use the LCD TV itself to make the necessary
cabinet measurements. Panasonic cannot be responsible for inaccuracies in cabinet
design or manufacture.
Specifications are subject to change without notice.
Non-metric weights and measurements are
approximate.
P110214
TC-L37DT30
37" LCD HDTV
SPECIFICATIONS
Dimensions (W x H x D)
Mass
Power Source
Rated Power Consumption
Standby condition
34.5" (874 mm) x 22.5" (570 mm) x 10.3" (260 mm)
(Including TV stand)
34.5" (874 mm) x 21.2" (536 mm) x 0.8" (1.3", 2.9")
(19 mm (33 mm, 72 mm))
(TV Set only)
34.2 lb. (15.5 kg) (Including TV stand)
27.6 lb. (12.5 kg) (TV Set only)
AC 110-127 V, 60 Hz
129 W
0.2 W
DIMENSIONS
JACKS
Side Panel
15
15
Top View
Side View
Front View
2.9 (72)
1.3 (33)
0.8 (19)
AV IN
HDMI
4
22.5 (570)
21.2 (536)
34.5 (874)
Rear Panel
3.1 (78)
14.8 (375)
10.3 (260)
Back View
7.9 (200)
7.9 (200)
Note:
To make sure that the LCD TV fits the cabinet properly when a high degree of precision
is required, we recommend that you use the LCD TV itself to make the necessary
cabinet measurements. Panasonic cannot be responsible for inaccuracies in cabinet
design or manufacture.
Specifications are subject to change without notice.
Non-metric weights and measurements are
approximate.
P110214
Note
Limited Warranty (for Canada)
Support Information
71
USA Only: Disposal may be regulated in your community due to
Environmental considerations. For disposal or recycling information,
please visit Panasonic website: http://www.panasonic.com/environmental
or call 1-888-769-0149.
Sólo Estados Unidos: La disposición puede estar regulada en su
comunidad debido a consideraciones ambientales. Para información
sobre la disposición o reciclaje, por favor visite la página web de
Panasonic: http://www.panasonic.com/environmental
ó llame al 1-888-769-0149.
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this serial number in
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid
in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
Anotación del cliente
El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el espacio
provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de su adquisición,
para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también para disponer de los
servicios que le ofrece la garantía.
Modelo
Número de serie
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
© 2011 Panasonic Corporation of North America. All Rights Reserved.
© 2011 Panasonic Corporation of North America. Todos los Derechos Reservados.
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
Printed in U.S.A.
Impreso en EE.UU.
M0111-1041
Download PDF

advertising