Jabra Stone2
Jabra® Stone2
User manual
www.jabra.com
THANK YOU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ABOUT YOUR JABRA STONE2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
WHAT YOUR HEADSET CAN DO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
english
Contents
CHARGE YOUR HEADSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
TURNING YOUR HEADSET ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . 5
PAIRING IT WITH YOUR PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
WEARING STYLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HOW TO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
WHAT THE LIGHTS MEAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
USING YOUR JABRA STONE2 WITH TWO MOBILE DEVICES . . . . 11
TROUBLESHOOTING & FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Need more help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Taking care of your headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Jabra Stone2
1
ABOUT YOUR JABRA STONE2
1 Answer/end button
Tap to answer/end call
english
THANK YOU
Thank you for purchasing the Jabra STONE2 Bluetooth® headset.
We hope you enjoy it! This instruction manual will get you started
and ready to make the most of your headset.
2 StatusDisplay™
Shows battery and connection status
3 Light indicators on portable charging unit
Shows battery charging status (single red LED) and battery time
left (One (<33%), Two (<66%) or Three green (>66%) LEDs)
4 Charging socket
Charge portable charger with micro USB wall charger
5 Earhook
Integrated in headset shape
6 Eargels
Four different ear gels assist the perfect fit
7 Clothing clip
Clip portable charger to your belt and go
5
5
2
7
1
3
4
6
Jabra Stone2
2
Your Jabra STONE2 lets you do all this:
-Answer or ignore phone calls by using your voice
-Ease of use with Jabra Voice Guidance
- Last number redialling
-Adjust volume up or down by touch control
- Voice dialling
-Three way calling
- When connected, tap the answer/end button to hear battery status
- MultiUseTM – be connected to two Bluetooth® devices at the
same time
- Listen to music in your headset through your Bluetooth® A2DP
enabled phone
-Battery status icon on your iPhone (Apple iPhone only)
english
WHAT YOUR HEADSET CAN DO
Jabra STONE2 is a Bluetooth® headset with a completely new
shape that sits discreetly on your ear. It comes with an integrated
portable charger that functions both as a holder and a portable
charger when you are not on a call.
Specifications:
Usage
1. Cutting edge technology combined with the new headset
shape for the future
2.Advanced voice features allow you to be truly hands-free
3. Clear wireless streaming of your favorite multimedia – radio,
podcasts, video, etc. (A2DP enabled phones*)
4.Better conversations with Noise Blackout™ Extreme
5. Portable charging unit allows you to charge on the go
6. Features voice activated call answering, voice guidance incl. Caller
ID (PhoneBook Access Profile), answer/end, voice dialling*, Multiuse™
7.Bluetooth technology – easy pairing with Bluetooth 2.1 +
EDR & eSCO
8. Up to 2 hours talk time in headset – 8 additional in charging
stone and up to 15 days standby time
9.Automatic volume adjustment on received audio (Volume is
adjusted automatically if incoming voice is too low)
10. Audio shock protection
* Refer to phone’s user manual
Jabra Stone2
3
The device:
-On/off function is automatic. When the headset is taken out of
portable charging unit, it is on, and when it is inserted into the
portable charger, it is off. When your phone rings, you can take
the headset out of the portable charging unit and take the call
on the headset
- Charging is intelligent. The headset charges automatically when
inserted into the portable charging unit ensuring that your
headset is always fully charged ready for your next conversation
- Usage is voice-assisted. When using the headset there will be
a guiding voice instructing you i.e. how to pair up, low battery
etc.(Voice Guidance). Furthermore you can answer/ignore calls
by using your own voice (Voice Control)
- StatusDisplayTM with indicators for both Bluetooth® connectivity
and battery status ensures that you always know the status of
your headset and your portable charging unit
- Size of portable charging unit and headset clicked together:
H 58 mm x W 51 mm x D 25 mm
- Weight: Total weight is 33g (Headset weighs 7g and portable
charging unit weighs 26g)
- Charging plug: Micro-USB 5 Pin / B Type
-Operating range up to 10 meters (approximately 33 feet)
english
11. Qualified for Bluetooth® Specification version 2.1, supporting
Headset and Hands-free Profiles for phone conversations,
Advanced Audio Distribution Profile (A2DP) for streaming
music and Simple Secure Pairing for pairing functionality with
mobile phone without pincode
12. e-SCO for enhanced audio quality
13. Up to 128-bit encryption
GETTING STARTED
You should follow three steps before using your new headset:
1 Charge your headset (approximately 3 hours)
2 Activate Bluetooth® on your mobile phone (refer to the
manual for your Mobile phone)
3 Pair your headset to your mobile phone
You can also listen to the Voice Guidance to assist your pairing to
your Bluetooth® device.
Jabra Stone2
4
english
CHARGE YOUR HEADSET
Make sure that your Jabra STONE2 is fully charged before you start
using it. Place the headset in the portable charging unit to charge
both headset and portable charger fully for the first time before
start using it. Use the AC power supply to charge from a power
socket. While charging, the battery indicator on the portable
charging unit shows solid red light and when the light indicator
turns off, the headset and portable charger are fully charged.
Charging time for both units clicked together is app 3 hours. You
can use the headset during recharge of the portable charging unit.
Use only the charger provided in the box – do not user chargers
from any other devices as this may damage your headset.
Please note: The lifetime of the battery will be significantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your both headset and
portable charger together at least once a month.
TURNING YOUR HEADSET ON AND OFF
Taking the headset out of the portable charging unit will turn it on.
Inserting the headset into the portable charging unit will turn it off.
-Taking it out: Place a finger on the backside of the portable
charging unit and press lightly on the headset sliding it free
of the charging unit. This way you easily can take it out of the
charging unit with the other hand.
- Inserting it: Place the headset in the charging unit and press
lightly on the headset to click the headset into the charging unit.
Please note: It is possible to turn off the headset manually without
using the portable charging unit. Press answer/end button for 4-5
seconds to turn it on/off.
Jabra Stone2
5
1 Put the headset in pairing mode
1.a First time pairing
-Take the headset out of the portable charging unit. The
headset will automatically start up in pairing mode (showing
flashing blue light on the Jabra StatusDisplayTM) and start
searching for a device.
1.b Pairing with another phone or re-pairing
-Take headset out of the portable charging unit. Turn the
headset off by long press on Answer/End button. Turn the
headset on again by long press on Answer/End – keep pressing
until StatusDisplayTM shows flashing blue light.
english
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of seconds. Jabra STONE2 assists you
with this process via Voice Guidance.
2 Set your Bluetooth® phone to ‘discover’ the Jabra STONE2
- Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth®’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.*
3 Your phone will find the Jabra STONE2
-The phone will find the headset under name “Jabra STONE2”.
- Your phone then asks if you want to pair with the headset.
-Accept by pressing ‘Yes’ or ‘OK’ on the phone. If your phone
asks for passkey or PIN confirm with 0000 (4 zeros). Your
phone will confirm when pairing is complete. Jabra STONE2
supports Bluetooth® version 2.1 including Simple Secure Pairing
meaning that the headset can be paired with a phone or other
Bluetooth® device without using PIN or passkey but only if the
other Bluetooth® device supports Bluetooth® version 2.1 also.
CONNECTIVITY
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
SELECT
DEVICES FOUND
Jabra STONE2
Jabra STONE2
Passkey:
****
SELECT
* Refer to phone’s user manual
Jabra Stone2
OK
HANDSFREE
Jabra STONE2
added.
The handsfree is
now ready for use
SELECT
6
HOW TO
The Jabra STONE2 is easy to operate. The Answer/End button
performs different functions depending on how long you press it:
Instruction
Duration of press
Tap
Press briefly
Double tap
Press briefly two times within 1/2 second
Press
Approx: 1-3 second
Long press
Approx: 4-5 seconds
Extra long press
Approx: 5-10 seconds
english
WEARING STYLE
Wear Jabra STONE2 on your right ear and enjoy the comfort.
Try out the different ear gels included in the pack to find your
preferred fit.
Answer a call
-Tap the Answer/End button
- Say “Answer” after the caller is announced.**
End a call
-Tap the Answer/End button
Reject/ignore a call*
- Double Tab the Answer/End button when the phone rings to
reject an incoming call. Depending on your phone settings, the
person who called you will either be forwarded to voice mail or
hear the busy signal
- Say “Ignore”
Make a call*
- When your Jabra STONE2 is connected to your phone, all calls
made from your phone will automatically be transferred to
your headset. (Subject to phone settings)
Last number redial**
- Double tap the Answer/End button
* Refer to phone’s user manual
** Phone dependent
Jabra Stone2
7
Activate voice dialling*
- Press Answer/End to activate voice dialling
Three way calling
- Press Answer/End to switch to call on hold. Press Answer/End
again to switch back to first call
english
Adjust volume**
- Slide your finger upwards on the front of the headset to turn
up the volume and slide your finger downwards to turn the
volume down
Show display
- Insert headset into Jabra STONE2 charger and take it out again
to check battery status and connectivity status
Play music (Some phones may require that you start a Media
Player first)*
- Music is controlled on the mobile phone
Answer a call while playing music**
- When listening to music and receiving a call, the music will
pause and you will hear your ringtone or caller ID
All about the Jabra Voice Feature
Type
Definition
Voice Control
Your voice in action, where you guide
the headset
Voice Guidance
The headset plays voice announcements to you
Voice Control
Your voice to STONE2
What it does
“Answer”
The headset captures your command
and directs the phone to take the call
“Ignore”
The headset captures your command
and directs the phone to ignore the call
* Refer to phone’s user manual
** Phone dependent
Jabra Stone2
8
“Welcome! You are now ready
for pairing. Go to the Bluetooth
menu on your phone.
Turn on or enable Bluetooth.
Search for devices and select
your Jabra hands free device
and chose pair or OK. If asked
for a PIN code use 0000”
What it means
Announced when powered
on the first time.
Repeated after 20 seconds.
Follow instructions on your
phone
”Pairing failed”
Announced if pairing
process fails.
”Connected to <phone name>”**
Announced when the
STONE2 is connected to a
named phone
”Connected”
Announced when the
STONE2 is connected, but no
phone name is available
”Disconnected”
Announced If a connected
phone is turned off, goes out
of range or has BT disabled
while in range and while the
headset is still turned on.
”Low battery”
Low battery warning when
battery goes below 20%
charge.
To be repeated every
5 minutes
Also when on a call.
”Power off”
Announced when STONE2 is
shut down
** Phone dependent
english
Voice Guidance
STONE2 announcements to you
Jabra Stone2
9
Announced when STONE2 is
turned on
”Call ended”
Announced when call is
ended
“Call from <name from phone
address book or number>”**
Announced when incoming
call and if the device
supports Caller ID (PBAP)
“Battery level is low/medium/
high”
”Battery level is high” is
announced when battery
has more than 50% left. If
the battery level is between
20% - 50%. “Battery level
is medium” is announced.
If battery level is below
20% “Battery level is low“ is
announced.
english
”Power on”
WHAT THE LIGHTS MEAN
There are light indicators on the headset and on the portable
charging unit to ensure ease of use.
Light indicators on headset:
On the inside of the headset the Jabra StatusDisplayTM indicates
different states of the product. The Jabra StatusDisplayTM consists
of 2 light indicators – a battery indicator and a Bluetooth®
connection indicator. That way you will always know if the headset
is connected to your phone and if your battery in your headset
needs to be charged.
Headset - light indicators
Battery
indicator
Solid green light
Battery OK
Solid red light
Less than 20 min talk
time left (approx.)
Bluetooth®
indicator
Flashing blue light
In pairing mode
Solid blue light
Paired with phone
** Phone dependent
Jabra Stone2
10
Light indicator on charging unit:
By the charge plug on the charging unit a light indicator shows
different states during charge of the product (AC charger or USB
cable)
english
Jabra STONE2 StatusDisplayTM will turn off after 4 seconds of
non-activity to save battery. Only when in pairing mode the
StatusDisplayTM will remain turned on for longer time (3 min).
The headset is still active.
Portable charging unit - light indicator
Solid red light
Is charging (red light will turn off when
fully charged)
No light
Fully charged
Battery Status display on charging unit:
The display shows how much battery left in the charging unit. The
display will light up every time the headset is inserted into the
charging unit.
Battery Status display on portable charging unit
3 green lights flashing
More than 5½ hours talk time left (>66%)
2 green lights flashing
2½ to 5½ hours talk time left (33-66%)
1 green light flashing
Less than 2½ hours talk time left (<33%)
USING YOUR JABRA STONE2 WITH TWO MOBILE
DEVICES
The Jabra STONE2 is capable of having two mobile phones (or
Bluetooth® devices) connected to the headset at the same time.
This will give you the freedom of having only one headset to
operate both of your mobile phones.
How to pair your Jabra STONE2 with 2 Bluetooth® devices:
1 Pair device number 1 with your headset using the pairing
instruction above for re-pairing your headset (if device 1 is
paired to your headset already go to step 2)
Jabra Stone2
11
english
2Turn your headset off manually by pressing the Answer/End
button for 4-5 seconds
3 Pair device number 2 with your headset using the same pairing
instruction again
4 Connect to device 1 again
Please note that it is important to connect to device 1 again after
pairing device 2 to ensure connection to both devices.
TROUBLESHOOTING & FAQ
I hear crackling noises
- Bluetooth® is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
- Increase the volume in the headset
-Ensure that the headset is paired to a device that is playing
- Make sure your phone is connected to the headset by tapping
the Answer/End button
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone - follow the pairing instructions in ‘Pair Your
Headset to a Phone or other Device’
Will the Jabra STONE2 work with other Bluetooth® equipment?
-The Jabra STONE2 is designed to work with Bluetooth® mobile
phones. It can also work with other Bluetooth® devices that are
compliant with Bluetooth® version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution profile
(A2DP)
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free profile. Even if the handsfree profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details
Jabra Stone2
12
I cannot hear music in the headset
-Ensure that the headset is connected to your Bluetooth®
enabled device
- You may have been out-of-range (10 meters) to your Bluetooth®
enabled device or the headset might have experienced an
ESD (Electrostatic discharge) incidence. Press the Answer/End
button to re-establish the Bluetooth® audio link
- Increase the volume on your device
- Make sure that the Jabra STONE2 is charged
- Turn the headset off. Wait a couple of seconds, press the
answer/end button until yellow light comes on. Set your phone
to discover Jabra STONE2 and your phone will find it. Connect
and you should now be able to listen to music
english
Please note that some features can only be operated from the primary
device e.g. voice dial using Jabra STONE2 with 2 mobile phones
The music I hear sounds very poor
Make sure the other device supports Bluetooth® 1.1 or higher
including the Advanced Audio Distribution Profile (A2DP) for
music streaming. If the above procedure did not help then it is
possible that your phone is using the stereo audio connection in
a different way. You can enable this mode on Jabra STONE2 by
performing pairing in the following way:
-Remove the Bluetooth® connection to Jabra STONE2 on your
phone
- Make sure the headset is charged
-Take the headset out of the portable charging unit
- Press the Answer/End button for 10-15 seconds until the
Bluetooth® connection indicator shows yellow light
- Go through the regular steps in pairing the headset to a
Bluetooth® device
Be aware that standby time of the Jabra STONE2 can be lower
when using this pairing compared to the regular one.
Jabra Stone2
13
My Jabra product does not announce the caller names during
incoming calls
- Ensure that your phone supports the Bluetooth® phonebook
access profile (PBAP) and that the name of the caller is in your
phonebook.
Please note that on some Android phones a warning message
about the phonebook access appears in the top left corner. You
must select this message and agree to the connection in order to
get caller ID to function properly.
english
The music player starts immediately upon connection and I
hear music in the headset
- Turn the headset off. Wait a couple of seconds, press the
answer/end button until yellow light comes on. Set your phone
to discover Jabra STONE2 and your phone will find it. Connect
and music should start only when asked for.
Need more help?
1. Web: www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail: Deutsch English Español Français Italiano Nederlands Polska Scandinavian Россия support.de@jabra.com
support.uk@jabra.com
support.es@jabra.com
support.fr@jabra.com
support.it@jabra.com
support.nl@jabra.com
support.pl@jabra.com
support.no@jabra.com
support.ru@jabra.com
Information: info@jabra.com
Jabra Stone2
14
00800 722 52272
70 25 22 72
0800 1826756
00800 722 52272
900 984572
0800 900325
800 786532
00800 722 52272
0800 0223039
800 61272
00800 722 52272
0801 800 550
00800 722 52272
00800 722 52272
020792522
0800 0327026
+7 916 246 69 00
00800 722 52272
english
3. Phone: Belgique/Belgie Danmark Deutschland Die Schweiz España France Italia Luxembourg Nederland Norge Österreich Polska Portugal
Suomi Sverige United Kingdom Россия International Taking care of your headset
-Always store the Jabra STONE2 with the power off and safely
protected
-Avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can shorten
battery life and may affect operation. High temperatures may
also degrade performance.
- Do not expose the Jabra STONE2 to rain or other liquids.
Jabra Stone2
15
1 Bluetooth® is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). Bluetooth® is safe
to use. It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
Bluetooth® devices either. Get more information at
www.bluetooth.com.
2 Bluetooth® profiles are the different ways that Bluetooth®
devices communicate with other devices. Bluetooth® phones
support the headset profile, the hands-free profile or both. In
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software.
3 Pairing creates a unique and encrypted link between two
Bluetooth® devices and lets them communicate with each other.
Bluetooth® devices will not work if the devices have not been
paired.
4 Passkey or PIN is a code that you enter on your Bluetooth® enabled
device (e.g. a mobile phone) to pair it with your Jabra STONE2.
This makes your device and the Jabra STONE2 recognize each
other and automatically work together.
5 Standby mode is when the Jabra STONE2 is passively waiting
for a call. When you ‘end’ a call on your mobile phone, the
headset goes into standby mode.
english
Glossary
This headset contains Li-Ion battery - Disposal
according to local regulations
www.jabra.com/weee
Jabra Stone2
16
© 2010 GN Netcom US, Inc. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included
herein are the property of their respective owners. The Bluetooth®
word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
© 2010 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
Made in China
Type: BTE2
www.jabra.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising