Panasonic EP-MA70 Massage Lounger Service Manual
The Panasonic EP-MA70 Massage Lounger is a comfortable and stylish massage chair that provides a variety of massage options. It features a reclining function for added comfort, and a footrest for a more complete relaxation experience. The massage features include tapping, kneading, rolling, and air compression. The lounger also has an adjustable seat and adjustable intensity levels. The EP-MA70 is perfect for someone who wants a relaxing and therapeutic massage experience.
Advertisement
Advertisement
EP-MA70
SPECIFICATIONS
ORDER NO. HPD1102U24CE
MASSAGE LOUNGER
EP-MA70
USA
CANADA
-
1 -
©2011 Panasonic Electric Works Co., Ltd.
All rights reserved. Unauthorized copying and distribution is a violation of law.
EP-MA70
ORDER NO. HPD1102U24CE
Contents
PAGE
1 COMPONENTS IDENTIFICATION………………………………………………………………………………………………………3
2 DISPLAY…………………………………………………………………………………………………………………………5
3 TURNING ON THE POWER……………………………………………………………………………………………………………6
4 REQUIRED TOOLS………………………………………………………………………………………………………………………7
5 OPERATION OF ELECTROMAGNETIC VALVES AND AIR BAGS…………………………………………………………………8
6 DISASSEMBLY…………………………………………………………………………………………………………………………9
7 ACTUAL WIRING…………………………………………………………………………………………………………………………41
8 CHECKING………………………………………………………………………………………………………………………………43
9 SECRET MODE…………………………………………………………………………………………………………………………59
10 EXPLODED VIEW………………………………………………………………………………………………………………………70
11 REPLACEMENT PARTS LIST…………………………………………………………………………………………………………76
-
2 -
EP-MA70
1.COMPONENTS IDENTIFICATION
1.1 MASSAGE LOUNGER
ORDER NO. HPD1102U24CE
-
3 -
EP-MA70
ORDER NO. HPD1102U24CE
1.2 CONTROLLER
Control Panel
*Display language on the control panel may differ depending on the region the unit was purchased.
-
4 -
EP-MA70
ORDER NO. HPD1102U24CE
2.Display
*Display language on the control panel may differ depending on the region the unit was purchased.
-
5 -
EP-MA70
3. TURNING ON THE POWER
ORDER NO. HPD1102U24CE
1. Plug the power into power socket.
2. Turn the lock switch to the open position.
3. Turn on the power switch on the power source switch box.
・When the operating lock switch is pointing toward ‘lock’, the power switch cannot be moved to the ‘on’ position.
After each use
・ Be sure to turn the power switch to ‘off’.
・To prevent children from using this unit, lock the power switch by moving the operating lock
・ switch to the ‘lock’ position.
As a further caution, unplug the power cord from the power socket after each use.
Timer
When the on/off button is pushed, a timer begins to prevent overuse. After approximately 15 minutes, time expires and the massage wheel goes into storage position.
-
6 -
EP-MA70
4. REQUIRED TOOLS
ORDER NO. HPD1102U24CE
-
7 -
EP-MA70
ORDER NO. HPD1102U24CE
5. OPERATION OF ELECTROMAGNETIC VALVES AND AIR BAGS
Air massage is operated driving the Pump unit x 1pc, 3-way 3-roll electromagnetic valve, and 3-way 4-roll electromagnetic valve.
1. When the operation stops, the Pump and all the Electromagnetic valves are OFF.
2. While the Reclining lift motor and the Ottoman lift motor operates, the control of air stops.
(Air is in the ventilation.) However, when the leg stretch operates, the Lift motor operates controlling the air.
3. When in the operation by the Controller Off/on switch, and the Electric reclining lift and the Electric ottoman lift are operated, the Pump stops. (The air pressure is maintained.)
-
8 -
EP-MA70
6. DISASSEMBLY
6.1. Removing the Armrests (right/left)
ORDER NO. HPD1102U24CE
6.2. Removing the Outside parts
-
9 -
EP-MA70
ORDER NO. HPD1102U24CE
-
10 -
EP-MA70
ORDER NO. HPD1102U24CE
-
11 -
EP-MA70
6.3. Removing the Rear cover
ORDER NO. HPD1102U24CE
-
12 -
EP-MA70
6.4. Removing the Shoulder side air bags
ORDER NO. HPD1102U24CE
-
13 -
EP-MA70
6.5. Removing the Seat side unit
ORDER NO. HPD1102U24CE
-
14 -
EP-MA70
6.6. Removing the Seat side air unit
ORDER NO. HPD1102U24CE
-
15 -
EP-MA70
6.7. Removing the Seat
ORDER NO. HPD1102U24CE
-
16 -
EP-MA70
ORDER NO. HPD1102U24CE
-
17 -
EP-MA70
6.8. Removing the Under box
ORDER NO. HPD1102U24CE
-
18 -
EP-MA70
ORDER NO. HPD1102U24CE
-
19 -
EP-MA70
ORDER NO. HPD1102U24CE
-
20 -
EP-MA70
6.9. Removing the Ottoman
ORDER NO. HPD1102U24CE
-
21 -
EP-MA70
ORDER NO. HPD1102U24CE
-
22 -
EP-MA70
ORDER NO. HPD1102U24CE
-
23 -
EP-MA70
ORDER NO. HPD1102U24CE
-
24 -
EP-MA70
ORDER NO. HPD1102U24CE
-
25 -
EP-MA70
ORDER NO. HPD1102U24CE
-
26 -
EP-MA70
6.10. Removing the Massage mechanism block
ORDER NO. HPD1102U24CE
-
27 -
EP-MA70
ORDER NO. HPD1102U24CE
-
28 -
EP-MA70
ORDER NO. HPD1102U24CE
6.11. Massage block up/down sensor gear adjustment method
When the Massage mechanism block is removed from the Chair, the position of the Up/down sensor gear changes resulting in the change of the up/down stop position. When installing the Massage mechanism block on the Rear frame, be sure to adjust the position with the Up/down sensor gear.
Up/down sensor gear position adjustment procedure
1.Before installing, the Massage mechanism block on the Rear frame must be moved down to the lowest position by setting the
Controller position adjustment button to DOWN. (Refer to the Massage block manual mode operation method.)
2.Install Rail pieces (right/left) and screw them with each four Screws.
3.Make sure that the Massage mechanism block has been mounted horizontally by moving the Massage mechanism block.
* Unless the Massage mechanism block has been mounted horizontally, an abnormal sound or problems may occur.
4.Move it up to the highest position (until the Massage mechanism block stops) by setting the Controller position adjustment button to UP.
5.Peeping into the square hole of the Rear frame, check the position of the Massage mechanism block to adjust.
Caution:If the Up/down gear overruns, the Up/down worm wheel cracks.
*One thread of the Up/down sensor gear gives a stroke change of 4mm.
*When adjusting the Up/down position, hold the ‘Gear’ and adjust it. (Do not touch the Sensor board.)
Adjust the distance between the square hole and Guide roller assembly to 10mm using the Controller position adjustment button.
6.Using the Controller position adjustment button, check the up/down stroke.
-
29 -
EP-MA70
ORDER NO. HPD1102U24CE
6.12. Tips in installing the Connecting cord for power source
Move the Massage mechanism block to the highest position.
* After installing each Connecting wires, be sure to move the Massage mechanism block up and down pushing the buttons on the Controller so as to check whether each Connecting cords do not touch Belts or the Rear cover fixing plate ore at not hooked on the Up/down pinions on both sides. And check also if each Connecting cords are not extremely tense when the Massage mechanism block is at the highest position.
Caution
When installing the Rear cover, move the Massage mechanism block to the highest position first so as to prevent the hooking of each Connecting cords. And wind the cord around the wire. If you wind the wire around the cord, the wire becomes bent.
-
30 -
EP-MA70
ORDER NO. HPD1102U24CE
6.13. Allocation of the Lead wires of the Massage mechanism block
Allocation of the Lead wires of the Main PCB, each Motors, other parts, Cable ties are as follows:
-
31 -
EP-MA70
ORDER NO. HPD1102U24CE
6.14. Tips of disassembly and assembly of the Massage mechanism block
6.14.1. Removing the Up/down sensor
1. Disconnect the connector (CN106) on the Main PCB.
2.
Cut the Cable tie T30R x 2, T18S x 1, which bind the Lead wires.
3. Remove two screws on the Up/down gear box B and the Up/down sensor install stand, and remove the Up/down sensor.
Caution in installing
When installing the Up/down sensor, make the leg of the Sensor install stand fit into the groove of the
Up/down gear box B.
-
32 -
EP-MA70
6.14.2. Removing the Intensity sensor
1. Disconnect the Connector (CN103) on the Main PCB.
2. Cut the Cable tie T30R x 2, T18S x 1, which bind the Lead wires.
ORDER NO. HPD1102U24CE
2. Remove the Install screw on the Massage block frame and the Intensity sensor install stand.
Caution in installing
The Massage block frame and the Intensity sensor should be installed firmly.
(Otherwise, it leads to the overrun in the direction of the Strong.)
When installing each Lead wires with Cable ties, check if Lead wires are not abnormally pulled or hooked operating the Massage mechanism block in the directions of strong or weak.
(Pay special attention on the *1, because the Wire moves in the operation.)
-
33 -
EP-MA70
6.14.3. Removing the Width sensor
ORDER NO. HPD1102U24CE
-
34 -
EP-MA70
6.14.4. Removing the Width motor
1. Disconnect the Connectors (CN501, CN1, CN30) on the Main PCB.
2. Cut the Cable ties (T18S, T30R) binding the Lead wires.
3. Remove the Width belt.
4. Remove two Install screws on the Width motor.
ORDER NO. HPD1102U24CE
6.14.5. Removing the Up/down gear block
* You cannot replace the Up/down shaft or Up/down motor without
disassembling the Up/down gear block.
* Proceed the procedure of 1-4 of 6.12.3. Removing the Width sensor.
1. Remove the Massage mechanism block from the Rear frame.
2. Remove 10 screws on the Up/down driving install plate and the Intensity driving install plate.
3. Remove two screws on the Up/down sensor install plate.
4. Remove three screws on the Up/down gear box and the Up/down driving install plate.
5. Remove four Install screws on the Up/down gear box A/B.
6. Remove two Install screws on the Up/down gear box and the Up/down motor.
(One is the Grounding screw.)
-
35 -
EP-MA70
ORDER NO. HPD1102U24CE
6.14.6. Removing the Up/down shaft (Up/down shaft bolt)
* Remove the Massage mechanism block from the Massage chair before executing this work.
1. Remove the Up/down shaft bolt on the Pinion B/C with the 13mm-Box driver and a Phillips screwdriver
Caution in installing
The Up/down shaft bolt may be broken if it is tightened too much.
Tighten the Up/down shaft bolt at 35-45kgfcm (350-450Ncm) with a torque wrench.
6.14.7. Removing the Grease cover
-
36 -
EP-MA70
6.15. Removing each Lift units
6.15.1. Removing the Ottoman lift unit
ORDER NO. HPD1102U24CE
-
37 -
EP-MA70
6.15.2. Removing the Reclining lift unit
ORDER NO. HPD1102U24CE
-
38 -
EP-MA70
6.16. Removing the Rear frame
ORDER NO. HPD1102U24CE
-
39 -
EP-MA70
6.17. Appearance checking
Check if Cable ties, Screws, Connectors, and Hoses are properly installed.
ORDER NO. HPD1102U24CE
-
40 -
EP-MA70
7.ACTUAL WIRING
7.1. Air hoses
ORDER NO. HPD1102U24CE
-
41 -
EP-MA70
ORDER NO. HPD1102U24CE
7.2. Wiring (Connecting cord for power source – Sub PCB, Power source switch block)
-
42 -
EP-MA70
8. CHECKING
ORDER NO. HPD1102U24CE
-
43 -
EP-MA70
ORDER NO. HPD1102U24CE
-
44 -
EP-MA70
ORDER NO. HPD1102U24CE
-
45 -
EP-MA70
ORDER NO. HPD1102U24CE
-
46 -
EP-MA70
ORDER NO. HPD1102U24CE
-
47 -
EP-MA70
ORDER NO. HPD1102U24CE
-
48 -
EP-MA70
ORDER NO. HPD1102U24CE
-
49 -
EP-MA70
ORDER NO. HPD1102U24CE
-
50 -
EP-MA70
ORDER NO. HPD1102U24CE
-
51 -
EP-MA70
ORDER NO. HPD1102U24CE
-
52 -
EP-MA70
ORDER NO. HPD1102U24CE
-
53 -
EP-MA70
ORDER NO. HPD1102U24CE
-
54 -
EP-MA70
ORDER NO. HPD1102U24CE
-
55 -
EP-MA70
8.2. Checking the pressure of the Air bags
ORDER NO. HPD1102U24CE
-
56 -
EP-MA70
ORDER NO. HPD1102U24CE
-
57 -
EP-MA70
ORDER NO. HPD1102U24CE
8.3. Wiring diagram of Main PCB and Sub PCB
The following values are in the standby conditions with the Off/On switch on the Controller pushed.
Values with * are when each operations are executed. (Output voltages are approximate.)
Remove Connectors to check the resistance of the parts.
-
58 -
EP-MA70
ORDER NO. HPD1102U24CE
9. SECRET MODE
9.1. Preparation of Secret Mode
Before proceeding to each Secret Modes, execute the following Preparation of the Secret Mode. Insert the
Power plug to the power source and turn on the Switch on the Power source switch box.
1. Turn on the Switch on the Power source switch box.
2. While pushing the buttons of REFRESH and HIP, keep pushing the Off/On button for more than three seconds.
(REFRESH, HIP, and USER3 lights and it buzzes three times.)
3. Push NECK, then SHOULDER of MANUAL, and at final push the OK button.
(CO is displayed on the screen.)
* You can choose each operation modes in the Secret Mode list by pushing the
BACK INTENSITY button. After choosing, push the OK button.
You can resume to the Secret Mode list by pushing the OK button for more than three seconds.
-
59 -
EP-MA70
9.2. Display of total usage time [C0]
1. Proceed the procedures 1-4 of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C0 appears, and push the OK button.
3. Push the OK again, then 1,000’s place, 100’s plate, ten’s place, and single’s place
are shown every time you push the OK button.
ORDER NO. HPD1102U24CE
9.3. Input of total usage time [C2 01]
1. Proceed the procedures 1-4 of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C2 appears, and push the OK button twice.
3. Push the button of BACK INTENSITY till 01 appears, and push the OK button.
4. Push the button of BACK INTENSITY and push the OK button in which you want to input Nos.
Input the operation time from place of 1,000, place of 100, place of 10, and to place of 1.
-
60 -
EP-MA70
ORDER NO. HPD1102U24CE
9.4. Display of each operation time [C3]
1. Proceed the procedures of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C3 appears, and push the OK button twice.
3. Then, push the BACK INTENSITY and choose from 01 to 08, and from 11 to 16.
4. Push the OK again, then 1,000’s place, 100’s plate, ten’s place, and single’s place are shown every time you push the OK button.
5.If you push the OK, again, it buzzes once, then the operation resumes to 3.
-
61 -
EP-MA70
ORDER NO. HPD1102U24CE
9.5. Display of malfunction analysis-1 [C4]
. Category of abnormal stop is shown.
1. Proceed the procedures 1-4 of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C4 appears, and push the OK button. Any of the following is shown.
9.6. Display of malfunction analysis-2 [C6]
. It is shown at which operation the Massage block stops abnormally
.
1. Proceed the procedures of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C6 appears, and push the OK button. Any of the following is shown.
-
62 -
EP-MA70
ORDER NO. HPD1102U24CE
9.5. Display of malfunction analysis-1 [C4]
. Category of abnormal stop is shown.
1. Proceed the procedures 1-4 of 9.1. Preparation of Secret Mode.
3. Push the button of BACK INTENSITY till C4 appears, and push the OK button. Any of the following is shown.
9.6. Display of malfunction analysis-2 [C6]
. It is shown at which operation the Massage block stops abnormally
.
1. Proceed the procedures of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C6 appears, and push the OK button. Any of the following is shown.
-
63 -
EP-MA70
ORDER NO. HPD1102U24CE
9.7. Display of malfunction analysis-3 [C7]
It is shown which parts were stalled in the abnormal stop.
1. Proceed the procedures of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C7appears, and push the OK button. Any of the following is shown.
9.8. Display of malfunction analysis-4 [C8]
It is shown in which sensing is when the abnormal stop occurred.
1. Proceed the procedures 1-4 of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till C8 appears, and push the OK button. Any of the following is shown.
-
64 -
EP-MA70
9.8. Display of malfunction analysis-4 [C8]
* If the display is 15 (Heater error).
①: If you push OK, the Heater lights.
②: When in the condition of ①,
1) If you push the Wider switch, the Heater arm(CN101) is shown when the operation error occurred.
2) If you push the Narrower switch, the Heater arm(CN102) is shown when the operation error occurred.
Caution: If the temperature is more than 99℃, it is shown 99℃.
ORDER NO. HPD1102U24CE
Notes:
- The Sensor detects no change.
Disconnection of Lead wires, Loose Connectors, or faulty Sensors
- The Sensor detects abnormal change.
Partial disconnection of Lead wires, or faulty Sensors
- Sensor malfunction when the Switch is turned on.
Any Rotation sensors are faulty.
*When the Position sensors are faulty, it is detected as ‘’No change’’.
-
65 -
EP-MA70
ORDER NO. HPD1102U24CE
9.9. Checking after assembly [CA]
Check if the Massage mechanism block is properly assembled or there is nothing wrong with the Sensors or Motors. *Detect failures in Sensors or Motors.
1. Proceed the procedures of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till CA appears, and push the OK button.
3. Massage mechanism block starts operating. If there is nothing wrong, it stops normally.
4. If the operation stops halfway, push the buttons of Off/On or Stop on the Controller.
9.10 Adjustment of Body pressure sensor [CC].
1. Proceed the procedures of 9.1. Preparation of Secret Mode
2. Push the button of BACK INTENSITY till CC appears, and push the OK button. Any of the following is shown.
3. Push the OK button again.
4. Push the Off/On button on the Controller. The adjustment is done.
-
66 -
EP-MA70
ORDER NO. HPD1102U24CE
9.11. Checking the Heater
Check if the Heater increases its temperature properly by the list of the room temperature and its time till it reaches designated temperatures.
(Our criterion is that the spot touching the human body is 50℃. However, there is the balance 5℃ in the Heat sensor and the spot of the human body touching the Massage ball, therefore in the list 45℃ is used as criterion.)
Caution:
- Carry out the checking with nobody sitting or without operation of the Massage mechanism block.
- Heater massage balls need to be cool enough (normal temperature).
- The balance between right/left Massage balls is within ±5℃. If the values are within this range, it is not faulty.
【Checking procedures】
① Start CE mode of the Secret Mode of the Controller.
② If you push the REPEAT button for several times,,,,,,,,
For example,
<CE> Once <02> Twice <05> Thrice <2> Fourth <4>
This means that one of Heal balls is 25℃ and the other is 24℃. If you push CD, it resumes to the beginning.
*You can know the original temperatures of the Massage balls.
③ Push the button of HEAT OFF/ON and turn on the switch, and measure the time of the increase of the temperature.
④ Repeat the procedures of ② and measure the time till 45℃ is shown.
⑤ Check the Heater by the list. For example, if the room temperature is 20℃ and 45℃ is shown within
150 seconds, it can be judged ‘’Good’’.
-
67 -
EP-MA70
ORDER NO. HPD1102U24CE
9.12. Manual mode [CE]
Manual mode is used to remove or install the Massage mechanism block from or to the Massage chair, or to check each operations.
1. Proceed the procedures of 9.1. Preparation of Secret Mode.
2. Push the button of BACK INTENSITY till CE appears, and push the OK button.
3. You can check each operations by pushing the following Switches.
◆ Reclining switch (Back Up/down), Ottoman switch (Ottoman Up/down)
◆ Position switch (Upward, downward, narrower, wider)
◆ Back intensity (Strong, weak) ◆ Heater (Off, on)
◆ Manual (Neck, shoulder, middle back, lower back, full back, tap)
● Checking the temperature of the Heater
1. You can check the temperature of the Heater if you push the OK button after 9.12.2 then push the REPEAT button. However, if the HEAT OFF/ON button is not pushed, the normal temperature is displayed.
2. To stop the operation, push the Off/on button or the stop button.
-
68 -
EP-MA70
ORDER NO. HPD1102U24CE
-
69 -
EP-MA70
10. EXPLODED VIEW
ORDER NO. HPD1102U24CE
-
70 -
EP-MA70
ORDER NO. HPD1102U24CE
-
71 -
EP-MA70
ORDER NO. HPD1102U24CE
-
72 -
EP-MA70
ORDER NO. HPD1102U24CE
-
73 -
EP-MA70
ORDER NO. HPD1102U24CE
-
74 -
EP-MA70
ORDER NO. HPD1102U24CE
-
75 -
EP-MA70
11. REPLACEMENT PARTS LIST
Part No.
WEPMA70L0087
WEP3530L0007
WEP3530L0017
WEP3530L6717
WEP3200L0887
WEPMA70L0267
WEP578K3377
WEP3510S9027
WEP3510S9017
WEPMA70L0057
WEPMA70K3807
WEP596K0457
WEP3510L9687
WEP005W8517
WEP005W8527
WEPMA70K2018
WEP1260L2938
WEPMA70L2868
WEPMA70L0077
WEPMS40L7868
WEPMA70K1577
WEPMA70C1577
WEPMA70L1567
WEP2000L9567
WEP2005L0687
WEPMA50L0767
WEPMA50L0777
WEP573L6627
WEPMA70L3787
WEPMA70L3797
WEPMA70L0907
WEP3010L0417
WEP596N0357
WEPMS40K3907
WEPMS40L0917
WEPMA70K0097
WEPMA70L0497
WEPMA70L1538
WEPMA70L1528
WEPMA70L9647
WEPMA70L1587
WEPMA70L1197
WEPMA70L0877
WEP2110L9588
WEP3200L9667
34
35
36
36
37
30
31
32
33
26
27
28
29
23
24
24
25
38
39
40
41
42
43
16
17
18
19
20
21
22
11
12
13
14
15
7
8
9
10
Ref.No.
1
2
3
4
5
6
Part Name & Description
REAR FRAME
SIDE HINGE FITTING RIGHT
SIDE HINGE FITTING LEFT
SCREW
RESIN BUSHING
REAR COVER FIXING PLATE
SCREW
WIRE ON CHAIR
RAIL PIECE RIGHT
RAIL PIECE LEFT
SCREW
SHOULDER SIDE PLATE SMALL
SHOULDER SIDE PLATE LARGE
REAR FRAME FULCRUM PIN
OTTOMAN LIFT PIN LONG
SNAP PIN
CASTOR
HINGE PIN A MO
UNDER PIPE
S-SHAPED SPRING
RECLINING LIFT UNIT
OTTOMAN LIFT UNIT
BOTTOM COVER
SCREW
SCREW
ARMREST FIXING BRACKET
UNDER CLOTH
PUSH-TURN RIVET
SCREW
CABLE TIE MEDIUM
CABLE TIE LARGE
POWER SOURCE SWITCH BLOCK
POWER CORD
CONNECTING CORD FOR POWER SOURCE A
POWER SOURCE SWITCH BOX INSTALL PLATE
KEY
LOCK RELEASE LEVER HEAD K
LOCK RELEASE LEVER HEAD C
LOCK RELEASE LEVER B
SCREW
LOCK RELEASE LEVER A
LOCK SPRING
LEVER PIVOT
SCREW
SCREW
-
76 -
ORDER NO. HPD1102U24CE
1
1
1
1
1
1
1
1
1
1
15
1
3
5
35
12
2
1
1
1
2
2
1
1
1
1
8
2
2
1
16
2
2
2
4
55
1
1
1
Per
Unit
1
1
1
20
12
1
Remarks
EP-MA70
Part No.
WEPMA70L0597
WEPMA70L0387
WEPMA70L0437
WEPMA70L0607
WEPMA70L0727
WEPMA70L0297
WEPMA70K3297
WEPMA70C3297
WEPMA70L0328
WEPMA70L0407
WEPMA70L0587
WEPMA70L0107
WEPMA70L0127
WEPMA70L1507
WEPMA70L1517
WEPMA70L0177
WEPMA70L1407
WEPMA70L1427
WEPMA70K0617
WEPMA70C0617
WEPMA70L0247
WEPMA70K0398
WEPMA70C0398
WEP3530L0927
WEP3530L6937
WEP3200K0457
WEPMA70C0457
WEPMA70K3058
WEPMA70C3058
WEPMA70K3098
WEPMA70C3098
WEPMA70K3118
WEPMA70C3138
WEPMA70K3188
WEPMA70C3188
WEPMA70L0277
WEPMA70L1207
WEPMA70L1187
WEPMA70L1267
WEPMA70K3307
WEPMA70C3307
WEPMA70L0627
WEPMA70K3777
WEPMA70C3777
WEPMA70L0957
WEP3200L0467
72
72
73
74
74
68
69
70
71
64
65
66
67
61
61
62
63
75
75
76
77
77
78
79
55
56
56
57
58
59
60
53
53
54
54
55
50
51
52
52
Ref.No.
44
45
46
47
48
49
Part Name & Description
LOCK PIN SUPPORT FRAME
LOCK PIN
LOCK PIN RAIL
LOCK PIN SPRING
LOCK PIN COVER
OTTOMAN BASE FRAME
HINGE PIN B
V LOCK NUT
BRUSHCLIP
BRUSHCLIP
OTTOMAN BASE COVER INSIDE RIGHT K
OTTOMAN BASE COVER INSIDE RIGHT C
OTTOMAN BASE COVER INSIDE LEFT K
OTTOMAN BASE COVER INSIDE LEFT C
OTTOMAN BASE COVER OUTSIDE RIGHT K
OTTOMAN BASE COVER OUTSIDE RIGHT C
OTTOMAN BASE COVER OUTSIDE LEFT K
OTTOMAN BASE COVER OUTSIDE LEFT C
3 ROW HOSE CLIP
OTTOMAN SHAFT HOLDER
ROTATION SHAFT
RATATION DISC
OTTOMAN FOOT REST CLOTH K
OTTOMAN FOOT REST CLOTH C
OTTOMAN REAR COVER
SLIDE SPRING COVER RIGHT
SLIDE SPRING COVER LEFT
SLIDE GUIDE RIGHT
SLIDE GUIDE LEFT
SLIDE STOPPER RIGHT
SLIDE STOPPER LEFT
SLIDE PULLING SPRING
FOOT SLIDER RIGHT
FOOT SLIDER LEFT
SLIDE BASE COVER K
SLIDE BASE COVER C
SLIDE PIPE
SLIDE BASE COVER A K
SLIDE BASE COVER A C
SLIDE HINGE CLOTH K
SLIDE HINGE CLOTH C
SOLE SHIATSU SHEET
FOOT CLOTH K
FOOT CLOTH C
FOOT HOSE
ANCHOR CLIP
-
77 -
ORDER NO. HPD1102U24CE
2
2
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
16
1
1
2
1
2
2
1
1
1
1
1
1
1
1
1
1
2
2
6
6
Per
Unit
1
1
1
1
1
1
Remarks
EP-MA70
Part No.
WEPMA70L0867
WEPMA70L0997
WEP3530L9677
WEPMA70L0568
WEP3200L0937
WEP596N0357
WEPMA70C3757
WEP005W8507
WEP2200L9697
WEPMA70L3147
WEP3530L3137
WEP005W8537
WEPMA70L0287
WEPMA70L0257
WEPMA50L0287
WEP3210L0357
WEPMA50L0787
WEPMA50L0707
WEPMA50L4477
WEPMA70L2178
WEP2000L6017
WEPMA50L2248
WEPMA70L2457
WEPMA70L0307
WEPMA70L0238
WEPMA70L0187
WEPMA70L0318
WEPMA70L0947
WEPMA70L0967
WEPMA70L0827
WEPMA70L0837
WEPMA70L0847
WEPMA70L0927
WEPMA70L0558
WEPMA70L0887
WEPMA70L0687
WEPMA70L0747
WEPMA70L0347
WEPMA70K3757
WEPMA70L2447
WEPMA70L2437
WEPMA50L0717
WEPMA70L0667
WEP2110L0517
WEP2000L6967
WEPMA70L0637
109
110
111
112
113
114
115
116
117
101
102
103
104
105
106
107
108
118
119
120
121
122
123
124
95
96
97
98
99
100
101
90
91
92
93
94
86
87
88
89
Ref.No.
80
81
82
83
84
85
Part Name & Description
FOOT AIR BAG RIGHT
FOOT AIR BAG LEFT
SCREW
FOOT COVER
HINGE PIN MINI D
SNAP PIN
FOOT PIPE
FOOT UNDER COVER
MULTI ACTION SPRING
LEG UNDER URETHANE
LEG AIR BAG BOTTOM RIGHT
LEG AIR BAG BOTTOM LEFT
LEG AIR BAG REVERSE RIGHT
LEG AIR BAG REVERSE LEFT
LEG AIR BAG TOP RIGHT
LEG AIR BAG TOP LEFT
LEG COVER
LEG TOP HOSE
LEG REVERSE HOSE
LEG BOTTOM HOSE
LEG PIPE
LEG CLOTH K
LEG CLOTH C
CABLE TIE SMALL
SCREW
CORD INSTALL FITTING STAND SMALL
CORD INSTALL FITTING
CABLE TIE MEDIUM
UNDER BOX TOP RIGHT
UNDER BOX TOP LEFT
SURGE TANK
HOSE CLAMP
L-SHAPED HOSE C
L-SHAPED HOSE 1
PUMP UNIT
SUB PCB
SCREW
TRANSFORMER
3 WAY 3 ROLL ELECTROMAGNETIC VALVE
3 WAY 3 ROLL ELECTROMAGNETIC VALVE E
3 WAY 4 ROLL ELECTROMAGNETIC VALVE E
HOSE CONNECTING
HOSE CONNECTING SMALL
CIRCUIT BOARD SPACER
BUSHING FOR PCB
GROUNDING PLATE
-
78 -
ORDER NO. HPD1102U24CE
1
1
10
1
1
1
4
2
1
1
1
1
1
1
10
5
1
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
Per
Unit
1
1
8
1
2
2
Remarks
EP-MA70
Part No.
WEPMA70L3518
WEPMA70L0707
WEPMA70L0717
WEPMA70L0537
WEPMA70L0937
WEPMA70L0797
WEPMA70C3608
WEPMA70L0897
WEPMA70L0977
WEPMA70L0737
WEPMA70L0697
WEPMA70L0677
WEP3530L0217
WEPMA70K4498
WEPMA70K8547
WEPMA70T7188
WEPMA70K7197
WEPMA70L7937
WEP005W8507
WEPMA70K3628
WEPMA70C3628
WEPMA70K3638
WEPMA70C3638
WEPMA70L0807
WEPMA70L0917
WEPMA70L0147
WEPMA70L0197
WEPMA70L0787
WEPMA70L0337
WEPMA70L0817
WEPMA70L0577
WEPMA70L0757
WEPMA70L0647
WEPMA70L0657
WEPMA70L0987
WEPMA70L0857
WEPMA70L0117
WEPMA70L0137
WEPMA70K3608
WEPMA70K3168
WEPMA70C3168
WEPMA70K3108
WEPMA70C3108
WEPMA70K3218
WEPMA70C3218
WEPMA70L3218
154
155
156
157
158
159
159
160
160
146
147
148
149
150
151
152
153
161
161
162
162
163
163
164
140
141
142
143
144
145
146
131
132
133
134
135
136
137
138
139
Ref.No.
125
126
127
128
129
130
Part Name & Description
UNDER BOX BOTTOM
ARMREST HOSE RIGHT
ARMREST HOSE LEFT
ARMREST RIGHT CONNECTING HOSE
SEAT SIDE CONNECTING HOSE
SEAT SIDE AIR HOSE RIGHT
SEAT SIDE AIR HOSE LEFT
SEAT RIGHT CONNECTING HOSE
H-SHAPED 2 ROW JOINT
3 ROLL I-SHAPED JOINT
LEG HOSE TOP UNDER
LEG HOSE REVERSE UNDER
FOOT HOSE UNDER
SHOULDER SIDE HOSE
HIP HOSE
SHOULDER SIDE AIR BAG RIGHT
SHOULDER SIDE AIR BAG LEFT
HIP AIR BAG RIGHT
HIP AIR BAG LEFT
SEAT SIDE AIR BAG RIGHT
SEAT SIDE AIR BAG LEFT
SEAT K
SEAT C
SEAT AIR BAG RIGHT
SEAT AIR BAG LEFT
SEAT HOSE RIGHT
SEAT HOSE LEFT
SEAT FRONT AIR BAG
EDGE PROTECTION TUBE
CONTROLLER
REUSE BAND
CONTROLLER STAND
CORD CLIP
INSTALL SCREW SET
CABLE TIE SMALL
HEADREST K
HEADREST C
RELAX CUSHION K
RELAX CUSHION C
MASSAGE WHEEL COVER K
MASSAGE WHEEL COVER C
SHOULDER SIDE CLOTH RIGHT K
SHOULDER SIDE CLOTH RIGHT C
SHOULDER SIDE CLOTH LEFT K
SHOULDER SIDE CLOTH LEFT C
SIDE COVER OUTSIDE RIGHT
-
79 -
ORDER NO. HPD1102U24CE
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Per
Unit
1
1
1
1
1
1
Remarks
EP-MA70
Part No.
WEPMA70L3228
WEPMA70K3237
WEPMA70C3237
WEPMA70K3247
WEPMA70C3247
WEP3200K0457
WEPMA70L0067
WEPMA70H3158
WEPMA70C3238
WEPMA70K3767
WEP2110K0447
WEP596K0457
WEPMA70K3648
WEPMA70C3648
WEPMA70K3718
WEPMA70C3718
WEPMA70K3057
WEPMA70C3057
WEPMA70K3067
WEPMA70C3067
WEPMA70K3918
WEPMA70C3918
WEPMA70K3928
WEPMA50S9537
WEPMA50K9537
WEPMA70K3178
WEPMA70C3178
WEPMA70K3128
WEPMA70C3228
WEP3010K0997
WEPMA70K3818
WEPMA70C3818
WEPMA70K3828
WEPMA70C3828
WEPMA70K3838
WEPMA70C3838
WEPMA70K3848
WEPMA70C3848
WEPMA70L0027
WEPMA70C3928
WEPMA70L6037
WEPMA70L6337
WEP1270L6527
WEPMA70L1557
WEPMA50S9137
185
185
186
186
187
187
188
188
189
179
180
180
181
182
183
184
184
189
190
191
192
193
194
175
175
176
176
177
177
178
169
169
170
170
171
172
173
174
174
Ref.No.
165
166
166
167
167
168
Part Name & Description
SIDE COVER OUTSIDE LEFT
SIDE COVER INSIDE RIGHT K
SIDE COVER INSIDE RIGHT C
SIDE COVER INSIDE LEFT K
SIDE COVER INSIDE LEFT C
BRUSHCLIP
WASHER SCREW C
WASHER SCREW K
REAR COVER TOP K
REAR COVER TOP C
REAR COVER BOTTOM K
REAR COVER BOTTOM C
SCREWRIVET
SEAT SIDE CLOTH RIGHT K
SEAT SIDE CLOTH RIGHT C
SEAT SIDE CLOTH LEFT K
SEAT SIDE CLOTH C
INSIDE COVER RIGHT K
INSIDE COVER RIGHT C
INSIDE COVER LEFT K
INSIDE COVER LEFT C
INSIDE COVER FITTING RIGHT
INSIDE COVER FITTING LEFT
LEG COVER BACK K
LEG COVER BACK C
UNDER COVER FRONT
PUSHTURN RIVET
PUSHTURN RIVET
ARMREST RIGHT K
ARMREST RIGHT C
ARMREST LEFT K
ARMREST LEFT C
SIDE COVER RIGHT K
SIDE COVER RIGHT C
SIDE COVER LEFT K
SIDE COVER LEFT C
ARMREST BASE RIGHT K
ARMREST BASE RIGHT C
ARMREST BASE LEFT K
ARMREST BASE LEFT C
HEXAGONAL WASHER
LINK SPRING WASHER
WASHER
ARMREST LINK PIPE
SCREW
-
80 -
ORDER NO. HPD1102U24CE
1
1
1
1
1
1
1
1
1
7
15
1
1
1
1
1
1
1
2
6
7
2
6
1
1
1
1
1
1
1
1
1
2
1
1
12
12
1
1
Per
Unit
1
1
1
1
1
14
Remarks
EP-MA70
Part No.
WEPMA70L6047
WEPMA70K3137
WEPMA70C3137
WEPMA70K3157
WEPMA70C3157
WEPMA70L9687
WEP3200L1767
WEP3200L1797
WEP3530L1417
WEPMA50L1008
WEP3530L2197
WEP3530L1807
WEP3530S6027
WEP596L9537
WEP2200L9677
WEP3200L9677
WEP3530L2187
WEP3510L1397
WEP3200L1847
WEP590L6017
WEP760N9607
WEP3510L0227
WEP3530L1038
WEP3530L0167
WEP3530L0157
WEPMA70L0048
WEPMA70L1468
WEPMA70L0377
WEP3510L6057
WEPMA70L3537
WEPMA70L1457
WEP3530H1927
WEP578AL0317
WEPMA70L1447
WEPMA70L1547
WEPMA70L0427
WEP3530H1937
WEP2200L0337
WEP3510L0187
WEP3530L2147
WEP2200L1107
WEP3530L4957
WEPMA70L1488
WEPMA70L1438
WEPMA50L0337
WEP3200K0457
223
224
225
226
227
228
229
230
231
215
216
217
218
219
220
221
222
232
233
234
235
236
237
238
208
209
210
211
212
213
214
199
200
201
202
203
204
205
206
207
Ref.No.
195
196
196
197
197
198
Part Name & Description
HEXAGONAL WASHER
LEG COVER RIGHT K
LEG COVER RIGHT C
LEG COVER LEFT K
LEG COVER LEFT C
SCREW
GUIDE ROLLER SPRING
GUIDE ROLLER
MAIN FRAME
UP/DOWN GEAR BLOCK
UP/DOWN SHAFT
UP/DOWN SHAFT BOLT
FITTING
GUIDE ROLLER C BLOCK
GUIDE ROLLER C
RUBBER RING
PINION C
GUIDE ROLLER B BLOCK
PINION B
GUIDE ROLLER B
UP/DOWN SHAFT HOLDER B
GROUND PLATE
UP/DOWN GEAR BOX A
UP/DOWN GEAR BOX B
UP/DOWN WORM WHEEL
UP/DOWN MOTOR
UP/DOWN MOTOR SPEED SENSOR
MOTOR SPEED SENSOR COVER
SCREW
SCREW
SCREW
SCREW
UP/DOWN SENSOR
UP/DOWN SENSOR GEAR
UP/DOWN SENSOR INSTALL STAND
SCREW
SCREW
UP/DOWN DRIVING BLOCK INSTALL PLATE
WIDTH MOTOR
WIDTH MOTOR SPEED SENSOR
WIDTH BELT
INTENSITY SENSOR
INTENSITY DRIVING BLOCK
WIDTH DRIVING BLOCK
PROTECTION CLOTH
BRUSHCLIP
-
81 -
ORDER NO. HPD1102U24CE
1
6
2
1
1
2
1
1
1
1
2
4
4
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
1
1
1
1
2
2
1
1
1
2
1
1
Per
Unit
4
1
1
1
1
2
Remarks
EP-MA70
Part No.
WEPMA50L0207
WEPMA50L0217
WEP3510S9057
WEP3200L0157
WEP3510L0477
WEP3510L0507
WEP3510L0497
WEP3530L2208
WEP3530L2138
WEP3510L1887
WEP3510L1897
WEP3510L9067
WEPMA51L0488
WEP2110L0367
WEPMA50L0577
WEPMA50L0527
WEP3530S9537
WEP2200L3417
WEPMA70L0037
WEPMA70L2108
WEP3510L0547
WEP3510K0997
WEP780L0447
WEPMA70L2898
WEPMS40L5047
WEPMA70L2278
WEPMA70K3768
WEPMA70C3768
WEPMA70L4128
WEPMA70K8238
WEPMA70C8238
WEPMA70L8798
Ref.No.
239
240
241
242
243
244
261
262
263
264
254
255
256
257
258
259
260
245
246
247
248
249
250
251
252
253
Part Name & Description
ECCENTRIC LINK PLATE RIGHT
ECCENTRIC LINK PLATE LEFT
SCREW
ARM PULLING SPRING
INTENSITY SENSOR PLATE
INTENSITY SENSOR PLATE GREASE COVER
SNAP RIVET
ROTATION SENSOR
WIDTH SENSOR INSTALL STAND BLOCK
WIDTH SENSOR INSTALL STAND B
WIDTH SENSOR GREASE COVER
SCREW
WIDTH SENSOR PLATE
SNAP PIN
TAPPING SHAFT COVER
SNAP RIVET
SCREW
UP/DOWN BELT
PCB INSTALL PLATE
MAIN PCB
MASSAGE MECHANISM BLOCK COVER
SCREWRIVET
COVER CLIP
CONNECTING CORD FOR POWER SOURCE B
FERRITE CORE
1ST TRANSFORMER
OTTOMAN BLOCK K
OTTOMAN BLOCK C
MASSAGE MECHANISM BLOCK
PACKAGING K
PACKAGING C
INSTRUCTIONS MANUAL
ORDER NO. HPD1102U24CE
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
2
1
1
1
Per
Unit
1
1
2
2
1
1
Remarks
-
82 -

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Air massage
- Upper Body Massage
- Reclining
- Automatic shut-off
- Timer