Cobra 25 NW Owner's manual
Cobra 25 NW boasts a range of features to enhance your communication experience. With 40 CB radio channels, you can communicate with fellow travelers or receive emergency broadcasts. Its 4-watt AM RF power output ensures clear transmissions, while the Dynamic Microphone delivers crisp audio. Noise reduction features like the Automatic Noise Limiter and Noise Blanker minimize distractions, and the adjustable Dynamike Boost fine-tunes microphone sensitivity. Stay connected and informed on the road with the Cobra 25 NW.
PDF
Download
Document
Advertisement
Advertisement
How to Use Your Cobra 25 NW Contents Features...........................................................................................1 The CB Story..................................................................................A1 FCC Regulations FCC Warnings Included Accessories Controls & Indicators ................................................................A2 Our Thanks to You ......................................................................A3 Customer Support Installation Location.......................................................................................2 Mounting and Connection...................................................2 Antennas CB Antenna ................................................................................6 Marine Installation...................................................................6 Ignition Noise Interference ...................................................7 Operating Your 25 NW Turning On Your CB .................................................................8 Setting Channel Selector.......................................................9 To Receive ...................................................................................10 Selecting a Channel ................................................................10 S-Meter.........................................................................................11 Dimmer Control........................................................................12 RF Gain Control.........................................................................12 Setting Squelch.........................................................................13 To Transmit .................................................................................15 Setting Dynamike ....................................................................16 Transmit .......................................................................................17 RF Meter ......................................................................................17 External Speaker.......................................................................18 PA (Public Address)..................................................................19 ANL (Automatic Noise Limiter) Switch.............................21 NB, OFF (Noise Blanker) Switch...........................................21 Temporary Mobile Set-Up.....................................................22 Home And Office Set-Up.......................................................23 How Your CB Can Serve You...................................................25 A Few Rules You Should Know............................................25 Channel 9 Emergency Messages .......................................25 CB 10 Codes ...............................................................................27 Frequency Ranges......................................................................29 25 NW Specifications ................................................................30 Warranty Information ..............................................................31 Optional Accessories.................................................................32 Order Form ....................................................................................34 If You Think You Need Service .............................Back Cover Features of This Product • 40 CB Radio Channels • Heavy-Duty Dynamic Microphone • Full 4 Watts AM RF Power Output • Instant Channel 19 and 9 • Front Panel 4-Pin Microphone Connector • Switchable Noise Blanker • Switchable Automatic Noise Limiter • Adjustable Dynamike Boost • Tactile Controls • Illuminated Front Panel • Dimmer Control • RF Gain • 9 ft. mic cord CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 1 ! Installation Location Location Plan location of transceiver and microphone bracket before starting the installation. Select a location that is convenient for operation, yet does not interfere with the driver or passenger. The transceiver is usually mounted to the underside of the dash with the microphone bracket beside it. Mounting and Connection Mounting and Connection 1 Note The transceiver is held in the universal mounting bracket by two thumbscrews which allow for adjustment at a convenient angle. The bracket includes two selftapping screws and star washers. The mounting must be mechanically strong, conveniently located. Hold the radio with the mounting bracket in the exact desired location. If there is no interference, remove the bracket and use it as a template to mark the location for the mounting screws. CB Transceiver 2 2 Drill the holes and secure the bracket. Installation FCC ID:BBO3K229LTD COBRA MADE IN CHINA ANT PA.SP. EXT.SP. + POWER — SERIAL NO.:806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 3 Connect the antenna cable plug to the receptacle marked “ANT” on the back of the unit. continued 3 Installation Note Before installing the CB radio, visually check the vehicle’s battery connection to determine which terminal, positive or negative, is grounded (positive is the larger of the two) to the engine block (or chassis). A negatively grounded vehicle has its negative lead grounded to the chassis. Note Connecting to an accessory fuse prevents the unit from being left on accidentally, and also permits operating the unit without running the engine. Note In positive ground vehicles the red wire goes to the chassis and the black wire is connected to the ignition switch. 4 4 In a negative grounded vehicle, connect the red lead of the DC power cord to an accessory 12 volt fuse. 5 Connect the black lead to the negative side of the vehicle. This is usually the chassis. Any convenient location with a good electrical contact (remove paint) may be used. Installation TE OF JUNE 98 FCC ID:BBO3K229LTD COBRA ANT PA.SP. EXT.SP. + POWER – MADE IN CHINA 806135776 PRECISION ENGINEERED PRODUCT OF ELECTRONICS CORP. CHICAGO, ILL.60707 6 Plug power cable into back of unit marked “Power”. Be sure to observe polarity markings. 7 Mount the microphone bracket on the right side of the unit (driver’s left) using two screws supplied. Bracket should be placed under the dash so microphone is readily accessible. Microphone Connector RX 4 1 SHIELD TX 3 2 AUDIO RF SIG 1 3 5 79 +30dB OFF 8 MIN MAX Attach the 4-pin microphone cable to receptacle on front of unit and Install unit in bracket securely. 5 MIN MAX Antennas CB Antenna CB Antenna Since the maximum allowable power output of the transmitter is limited by the FCC, the antenna For optimum performance in is critical in affecting transmission distance. Only passenger cars the ideal antena properly matched antenna system will allow na location is on the center of maximum power output. Cobra loaded type the roof. Second choice is on the antenna models are highly recommended for center of the trunk. most installations. Consult your Cobra dealer for further details, or call 773.889.3087 and speak to Note a Cobra representative. Note Because many newer trucks feature fiberglass door skins, the outside mirror must be grounded to the chassis via a ground strap, if the antenna is mounted on the mirror bracket. FCC ID:BBO3K229LTD COBRA MADE IN CHINA ANT PA.SP. EXT.SP. + POWER — SERIAL NO.:806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 Note 3-way Combination Antennas are also available which allow operation of all three bands (AM-FM & CB), using a single antenna. However, this type of antenna usually results in less than normal transmit and receive range when compared to a standard-type “Single Band” CB antenna. Call 773.889.3087 for further information. 1 A standard antenna connector is provided on the transceiver for easy connection. Marine Installation The transceiver will not operate at maximum efficiency in a boat without a ground plate, (unless it has a steel hull). Before attempting installation , consult your dealer for information regarding an adequate grounding system and prevention of electrolysis between fittings in the hull and water. 6 Ignition Noise Interference Use of a mobile receiver at low signal levels is normally limited by the presence of electrical noise. The primary source of noise in automobiles is from the alternator and ignition system. Typically, when signal level is adequate, the background noise does not present a serious problem. Also, when extremely low level signals are being received, the transceiver may be operated with the vehicle’s engine turned off. The unit requires very little current and therefore will not significantly discharge the vehicle’s battery. Even though the Cobra 25 NW has an automatic noise limiter, in some installations ignition interference may be high enough to make good communications impossible. Many possibilities exist and variations between vehicles require different solutions. Consult your COBRA dealer or a 2-way radio technician for help in locating the source of a severe noise. 7 Operation Turning On Turning On Make sure the power cord, antenna and microphone are connected to their proper connectors before starting. 25 NW LTD CLASSIC RF SIG 1 3 5 79 +30dB OFF 1 MIN MIN MAX MAX The CB/PA button should be in the CB position. LTD CLASSIC 2 8 Rotate the On/Off Volume knob a normal listening level. clockwise to Operation Setting Channel Selector Setting Channel Selector LTD CLASSIC MIN 1 MAX MIN MAX Select one of forty channels and adjust volume. The selected channel is indicated by the LED readout directly above the channel selector knob 9 Operation To Receive To Receive LTD CLASSIC 1 Selecting A Channel Rotate the On/Off Volume knob clockwise the green RX/TX LED will be illiuminated. Selecting A Channel 25 NW LTD CLASSIC Note Switch to 9 (Emergency) or 19 (Information) for instant access to these channels. 1 10 Switch to NOR to select desired channel. Operation S-Meter S-Meter Swings proportionately to strength of incoming signal when receiving. 11 Operation Dimmer Control Dimmer Control LTD CLASSIC SQL Note The Dim controls the brightness of the front panel, signal strength O meter and channel display. MIN 1 MIN MAX MAX Rotate the DIM knob clockwise for maximum brightness; counter-clockwise for minimum. RF Gain Control RF Gain Control The RF Gain is used to optimize reception in strong or weak signal areas. 25 NW LTD CLASSIC RF SIG 1 3 5 79 +30dB Note The RF Gain is used to optimize reception in weak signal areas. OFF 1 12 MIN MAX MIN MAX Rotate the RF Gain knob counterclockwise to reduce gain in strong signal areas. In weak signal areas turn clockwise to increase gain. Operation Setting Squelch Setting Squelch Squelch is the “control gate” for incoming signals. Gate closed CLASSIC STRONG SIGNALS RF 3 5 79 +30dB MEDIUM SIGNALS OFF 1 MIN MAX MIN MAX Full clockwise rotation closes the gate allowing only very strong signals to enter. WEAK SIGNALS NOISE G AT E C L O S E D SIG 1 Gate open LTD CLASSIC RF SIG 1 3 5 79 STRONG SIGNALS +30dB MEDIUM SIGNALS OFF MAX MIN MAX Full counterclockwise rotation opens the “gate” allowing all signals in. WEAK SIGNALS NOISE G AT E OPEN 2 MIN 13 Operation Gate set to Desired Squelch Setting (DSS) LTD CLASSIC RF SIG 1 STRONG SIGNALS 3 5 79 +30dB MEDIUM SIGNALS OFF MIN MAX MIN MAX NOISE G AT E WEAK SIGNALS 3 14 To achieve the Desired Squelch Setting (DSS), turn the Squelch control counterclockwise until you hear noise. Now turn the control clockwise just until the noise stops. This is the DSS setting. Operation To Transmit To Transmit LTD CLASSIC Caution! Be sure the antenna is properly connected to the radio before transmitting. Prolonged transmitting without an antenna, or a poorly matched antenna, could cause damage to the transmitter. 0dB FF MIN 1 MAX Select desired MIN MAX Be sure to read the F.C.C. Rules and Regulations included with this unit before transmitting. channel. 15 Operation Setting Dynamike Setting Dynamike This controls the microphone sensitivity (outgoing audio level). LTD CLASSIC RF SIG 1 3 5 79 +30dB OFF 1 16 MIN MAX MIN Initially, set fully clockwise so that maximum voice volume is available. Dynamike may have to be reduced in some conditions. MAX Operation Transmit Transmit PUSH & HOLD 1 Push and hold mic button to transmit. Transmitter is now activated. When transmitting, hold the microphone two inches from your mouth and speak in a clear, normal voice. Release to receive. RF Meter RF Meter This meter swings proportionately to the RF output (outgoing signal) while transmitting. 17 Operation External Speaker External Speaker The external Speaker jack is used for remote receiver monitoring. Note The external speaker should DATE OF have 8-ohm impedance and be MFG :JUNE 98 rated to handle at least 4.0 watts. When the external speaker is plugged in, the internal speaker is automatically disconnected. FCC ID:BBO3K229LTD COBRA MADE IN CHINA ANT PA.SP. EXT.SP. + POWER – SERIAL NO.:806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 Note 1 Cobra external speakers are rated at 15 watts. See accessories page 33. 18 Connect an external speaker to the external speaker jack on the rear panel. Operation PA (Public Address) OF JUNE 98 PA (Public Address) ANT FCC ID:BBO3K229LTD COBRA Note PA.SP. EXT.SP. + POWER – MADE IN CHINA Speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts. 6135776 GINEERED PRODUCT OF TRONICS CORP. CHICAGO, ILL.60707 Note 1 The speaker should be directed away from the microphone to prevent acoustic feedback. Connect an external PA speaker to the PA jack on the rear panel. Note Activity on the CB channel will be heard through the PA speaker. Adjust Volume Control for normal listening level. 25 NW LTD CLASSIC RF SIG 1 3 5 79 +30dB OFF 2 Set MIN MAX MIN MAX CB PA switch to PA position. 19 Operation PUSH & HOLD 3 Push and hold microphone button and speak in a normal voice. Your voice will sound on the PA speaker. LTD CLASSIC RF SIG 1 3 5 79 +30dB OFF 4 20 MIN MAX Adjust PA speaker volume with the Dynamike control. MIN MAX Operation ANL (Automatic Noise Limiter) Switch ANL (Automatic Noise Limiter) Switch 25 NW LTD CLASSIC RF SIG 1 3 5 79 +30dB OFF 1 MIN MAX MIN MAX When switched to ANL the Automatic Noise Limiter is activated. This helps reduce noise created by the vehicle’s electronics. NB, OFF (Noise Blanker) Switch NB, OFF (Noise Blanker) Switch LTD CLASSIC RF SIG 1 3 5 79 Note +30dB VOL OFF The RF noise blanker is very effective in reducing repetitive noises such as ignition interference. SQL MIN MAX MIN MAX When switched to NB position the RF Noise Blanker is activated, providing increased noise filtration. When switched to OFF position Noise Blanking Filtration will be turned off. 21 Temporary Mobile Set-Up Temporary Mobile Set-Up Temporary Mobile Operation For temporary mobile operation you may want to purchase an optional cigarette lighter adapter from your COBRA dealer. This adapter and a magnetic mount antenna allow you to quickly “install” your transceiver for temporary use. DATE OF MFG :JUNE 98 FCC ID:BBO3K229LTD COBRA MADE IN CHINA SERIAL NO.:806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 22 ANT PA.SP. EXT.SP. + POWER – Home And Office Set-Up Base Station Operation (From 120V AC House Current) To operate your transceiver from home or office you will need a 13.8 volt DC Power Pack rated at a minimum of 2 amps, and a properly installed base station antenna. + — Base Station Operation (From 120V AC House Current) Warning! Do not attempt to operate this transceiver by connecting it directly to 120 vac. Note For further information call Cobra Customer Service 1.773.889.3087. 1 Simply connect the red (+) and black (-) leads of the transceiver to the corresponding terminals of the power pack. 23 Home And Office Set-Up DATE OF MFG :JUNE 98 FCC ID:BBO3K229LTD COBRA MADE IN CHINA ANT PA.SP. EXT.SP. + POWER – SERIAL NO.:806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 24 2 Plug power cable into back of unit marked “Power”. Be sure to observe polarity markings. 3 Connect properly installed and matched base station antenna. How Your CB Can Serve You • • • • • • • • • Warn of traffic problems Provide weather and road data Provide help in event of an emergency Provide direct contact with home or office Assist police by reporting erratic drivers Get “local information” to find destination Communicate with family and friends Suggest spots to eat and sleep Keep you alert while traveling A Few Rules You Should Know A. Conversations cannot last more than 5 minutes with another station. A one minute break is required to let others use the channel. B. You cannot blast others off the air by use of illegally amplified transmitters or illegally high antennas. C. You cannot use CB to promote illegal activities. D. Profanity is not allowed. E. You may not transmit music with a CB. F. Selling of merchandise and/or services is prohibited. 1. Set to channel 9 for emergencies Channel 9 Emergency Messages Be sure antenna is properly connected. 2. CB Distress Data When transmitting an emergency, you should request a “REACT BASE” and provide the CB distress data (called CLIP): C L I P all Sign ocation njuries roblem A Few Rules You Should Know Identify yourself. Be exact. Number. Type. Trapped? Give details and help needed. Note If no response on channel 9, try channels 19 or 14. Transmit CLIP repeatedly so any monitor can assist. 25 How Your CB Can Serve You The FCC gives these examples of permitted and prohibited messages for channel 9. These are only guidelines and not all-inclusive: Permitted Example Message Yes “Tornado sighted six miles north of town.” “Post number 10. No tornado sighted.” No Yes No Yes No Yes No Yes No 26 “Out of gas on I-95 at mile marker 211.” “Out of gas in my driveway.” “Four car accident on I-94 at Exit 11. Send police and ambulance.” “Traffic moving smoothly on I-94.” “Weather Bureau has issued thunderstorm warning. Bring sailboat into port.” “Attention motorists. Weather Bureau advises snow tomorrow will accumulate 4 to 6 inches.” “Fire in building at 539 Main, Evanston.” “Halloween patrol number 3. All quiet.” How Your CB Can Serve You CB 10-Codes CB 10-Codes Citizen Bands have adopted the “10-CODES” for standard questions and answers. These codes provide quick and easy communication, especially in noisy areas. Following are some of the more common codes and meanings: Code 10-1 10-2 10-3 10-4 10-5 10-6 10-7 10-8 10-9 10-10 10-11 10-12 10-13 10-16 10-17 10-18 10-19 10-20 10-21 10-22 10-23 10-24 10-25 10-26 10-27 10-28 Meaning Receiving poorly Receiving well Stop transmitting OK, message received Relay message Busy, stand by Out of service, leaving In service, subject to call Repeat message Transmission completed standing by Talking too rapidly Visitors present Advise weather/roads Make pick up at Urgent business Anything for us? Return to base My location is Call by phone Report in person to Stand by Completed last assignment Can you contact Disregard last info Moving to channel Identify your station 27 How Your CB Can Serve You Code 10-29 10-30 10-33 10-34 10-35 10-36 10-37 10-38 10-39 10-41 10-42 10-43 10-44 10-45 10-50 10-60 10-62 10-63 10-64 10-65 10-67 10-70 10-71 10-77 10-81 10-82 10-85 10-91 10-93 10-94 10-99 10-200 28 Meaning Time is up for contact Does not conform to FCC rules Emergency traffic Trouble at this station Confidential information Correct time is Wrecker needed at Ambulance needed Message delivered Turn to channel Traffic accident at Traffic tie up at Have a message for All units within range please report Break channel What is next message number? Unable to copy. Use phone Net directed to Net clear Awaiting your next message/assignment All units comply Fire at Proceed, transmission in sequence Negative contact Reserve hotel room for Reserve room for My address is Talk closer to mic Check my frequency on this channel Give me a long count Mission completed, all units secure Police needed at Frequency Ranges The COBRA 25 NW transceiver represents one of the most advanced AM two-way radios used as a Class D station in the Citizens Radio Service. This unit features advanced Phase Lock Loop (PLL) circuitry providing complete coverage of all 40 CB channels. Channel Channel CB Freq. CB Freq. Channel In MHz Channel In MHz 1 2 3 4 5 26.965 26.975 26.985 27.005 27.015 21 22 23 24 25 27.215 27.225 27.255 27.235 27.245 6 7 8 9 10 27.025 27.035 27.055 27.065 27.075 26 27 28 29 30 27.265 27.275 27.285 27.295 27.305 11 12 13 14 15 27.085 27.105 27.115 27.125 27.135 31 32 33 34 35 27.315 27.325 27.335 27.345 27.355 16 17 18 19 20 27.155 27.165 27.175 27.185 27.205 36 37 38 39 40 27.365 27.375 27.385 27.395 27.405 29 25 NW Specifications GENERAL CHANNELS . . . . . . . . . . . . . . . . . . . . . . . . CB - 40 CH FREQUENCY RANGE. . . . . . . . . . . . . . . . CB - 26.965 TO 27.405 MHZ FREQUENCY TOLERANCE . . . . . . . . . . . 0.005 % FREQUENCY CONTROL . . . . . . . . . . . . PLL (PHASE LOCK LOOP) SYNTHESIZER OPERATING TEMPERATURE RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30° C TO + 50° C MICROPHONE . . . . . . . . . . . . . . . . . . . . . PLUG-IN DYNAMIC INPUT VOLTAGE . . . . . . . . . . . . . . . . . . . 13.8VDC nom. (positive or negative ground) CURRENT DRAIN TRANSMIT: AM FULL MOD., 1.5A (MAXIMUM) RECEIVE: SQUELCHED, 0.3A; FULL AUDIO OUTPUT, 1.2A (NOMINAL) SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5/8” D X 6-3/8”W X 2-13/64” H WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 LBS. ANTENNA CONNECTOR . . . . . . . . . . . .UHF; SO-239 METER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ILLUMINATED; INDICATES RELATIVE POWER OUTPUT AND RECEIVED SIGNAL STRENGTH TRANSMITTER POWER OUTPUT . . . . . . . . . . . . . . . . . . .4 WATTS MODULATION . . . . . . . . . . . . . . . . . . . . .AM (AMPLITUDE MODULATION) FREQUENCY RESPONSE . . . . . . . . . . . .300 TO 3000 HZ OUTPUT IMPEDANCE . . . . . . . . . . . . . . .50 OHMS, UNBALANCED RECEIVER SENSITIVITY . . . . . . . . . . . . . . . . . . . . . . . .LESS THAN 1 µV FOR 10dB (S+N) /N SELECTIVITY . . . . . . . . . . . . . . . . . . . . . . .6 dB @ 7 KHZ, 60 dB @ 10KHZ IMAGE REJECTION . . . . . . . . . . . . . . . . . .80 dB, TYPICAL ADJACENT-CHANNEL REJECTION . . .60 dB, TYPICAL IF FREQUENCIES . . . . . . . . . . . . . . . . . . .DOUBLE CONVERSION: 1ST: 10.695 MHZ 2ND: 455 KHZ AUTOMATIC GAIN CONTROL (AGC) .LESS THAN 10 dB CHANGE IN AUDIO OUTPUT FOR INPUTS FROM 10 TO 50,000 MICROVOLTS RF GAIN RANGE . . . . . . . . . . . . . . . . . . . .40 dB NOISE BLANKER . . . . . . . . . . . . . . . . . . . .RF TYPE SQUELCH . . . . . . . . . . . . . . . . . . . . . . . . . .ADJUSTABLE;THRESHOLD LESS THAN 1µV AUDIO OUTPUT POWER . . . . . . . . . . . .4 WATTS FREQUENCY RESPONSE . . . . . . . . . . . .300 TO 3000 HZ DISTORTION . . . . . . . . . . . . . . . . . . . . . . .LESS THAN 7% @3 WATTS @ 1000 HZ BUILT-IN SPEAKER . . . . . . . . . . . . . . . . . .8 OHMS, 5W EXTERNAL SPEAKER (NOT SUPPLIED) .8 OHMS; DISABLES INTERNAL SPEAKER WHEN CONNECTED PA SYSTEM POWER OUTPUT . . . . . . . . . . . . . . . . . . .4 WATTS INTO EXTERNAL SPEAKER EXTERNAL SPEAKER FOR PA . . . . . . . .8 OHMS, 4 W. MIN. (NOT SUPPLIED) . . . . . . . . . . . . . . . . . . .THE PA SPEAKER ALSO MONITORS THE RECEIVER; SEPARATE JACK PROVIDED (SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE) 30 2Y QUALITY SEAL r Warr ea ty an COBRA will, without charge, repair or replace, at its option, defective CB radios, products or component parts upon delivery to the COBRA factory Service Department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. r Warr ea ty an COBRA ELECTRONICS CORPORATION warrants that its COBRA CB Radios, and the component parts thereof, will be free of defects in workmanship and materials for period of two (2) years from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A. 2Y Limited Two Year Warranty Cobra Electronics Corporation QUALITY SEAL You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobra's expense, if the product is repaired or replaced under warranty. 6500 West Cortland Street Chicago, Illinois 60707 This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Exclusions: This limited warranty does not apply; 1) to any product damaged by accident; 2) in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) if the serial number has been altered, defaced or removed; 4) if the owner of the product resides outside the U.S.A. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. COBRA shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. 31 Optional Accessories Replacement DC Power Cord For in vehicle use 426-002-N-001 $7.50 Replacement Mounting Bracket For in vehicle use 251-199-9-001 $4.50 Replacement Thumb Screws For in vehicle use 634-081-9-001 $0.60 Replacement Microphone Bracket For in vehicle use 741-080-9-001 $0.45 21” Base Loaded Magnet Mount Antenna HG A1000 $28.95 38” Base Loaded Magnet Mount Antenna HG A1500 $46.95 4 Pin Premium NoiseCancelling Microphone 4 Pin Premium NoiseCancelling Microphone Wood Grain HG M84W $74.95 5 Pin Premium NoiseCancelling Microphone HG M84 $74.95 32 HG M85 $74.95 Optional Accessories 4 Pin Replacement Dynamic Microphone HG M73 $19.95 Power Microphone $25.95 4 Pin Noise Canceling Microphone HG M77 $30.95 Dynamic External Speaker Noise Canceling External Speaker HG S300 $28.95 Noise Canceling With Talk Back External Speaker HG S500 $32.95 HG S100 $21.95 HG M75 You Can Find These Fine Accessories At Your Local Cobra CB Dealer If you wish, you can order directly from Cobra. 54” Base Loaded Magnet Mount Antenna HG A2000 $99.95 Order by phone Call 1.773.889.3087 (Press 1 from the main menu) 8 a.m.-6 p.m. M-F CST. Order by mail or fax Please fill out order form on next page, and mail/fax directly to Cobra. 33 Accessory Order Form Item # Description Cost Ea. 426-002-N-001 251-199-9-001 634-081-9-001 741-080-9-001 HG A1000 Replacement DC Power Cord Replacement Mounting Bracket Replacement Thumb Screws Replacement Microphone Bracket 21” Base Loaded, Magnetic Mount Antenna 38” Base Loaded Magnetic Mount Antenna 54” Base Loaded Magnetic Mount Antenna 4 Pin Premium Noise-Cancelling Microphone 4 Pin Premium Noise-Cancelling Microphone (Wood Grain) 5 Pin Premium Noise-Cancelling Microphone 4 Pin Replacement Dynamic Microphone 4 Pin Noise-Cancelling Microphone Power Microphone Dynamic External Speaker Noise-Cancelling External Speaker Noise-Cancelling with Talk Back External Speaker $7.50 $4.50 $0.60 $0.45 HG A1500 HG A2000 HG M84 HG M84W HG M85 HG M73 HG M77 HG M75 HG S100 HG S300 Shipping & Handling Amount of Shipping/ Order Handling $25.00 and under $4.75 minimum $25.01-$40.00 $6.95 $40.01-$80.00 $9.25 $80.01-$120.00 $10.25 $120.01-$160.00 $11.75 $160.01 and up $14.50 For AK, HI and PR please add an additional $15.00 for UPS shipments. HG S500 Qty. Amount $28.95 $46.95 $99.95 $74.95 $74.95 $74.95 $19.95 $30.95 $25.95 $21.95 $28.95 $32.95 Prices subject to change without notice. Subtotal Tax Table (Tax if applicable) Illinois residents add 7% Michigan residents add 4 % Cook Co. residents add .75% (7.75% total) Ohio residents add 6% Shipping/handling Chicago residents add 1% (8.75% total) Wisconsin residents add 5% Total Indiana residents add 5% For credit card orders fill out order form and fax to: 1.773.622.2269 or call 1.773.889.3087 (Press 1 from the main menu) Please print clearly 8:00 am - 6:00 pm, M-F, CST. Make check or money order (no stamps) payable to: Cobra Accessories Dept. 6500 West Cortland St. Chicago, IL 60707 Name Address (No P.O. Box) City State Zip Telephone ( ) Credit Card No. Exp. Date Customer Signature Circle One: Visa MasterCard Discover Allow 2 to 3 weeks for delivery. 34 The Cobra line of quality products also includes: • MicroTalk™ Radios • Radar Detectors • SafetyAlert® Traffic Warning Systems • HighGear™CB Accessories • HighGear™ Power Inverters Nothing comes close to a Cobra™ Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 If You Think You Need Service For technical assistance, please call our Automated Help Desk which can assist you by answering the most frequently asked questions about Cobra products. (773) 889-3087 24 hours a day, 7 days a week. A Consumer Service Representative can be reached through this same number 8:00 am - 6:00 pm, Monday through Friday, CST. Technical assistance is also available on-line in the Frequently Asked Questions (FAQ) section at www.cobraelectronics.com or by e-mail to [email protected] If you think you need service call 1.773.889.3087 “If your product should require factory service please call Cobra first before sending your unit in. This will ensure the fastest turn-around time on your repair.” You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the following in order to have the product serviced and returned. 1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction or carbon or a sales receipt. If you send the original receipt it cannot be returned. 2. Send the entire product. 3. Enclose a description of what is happening with the unit. Include a typed or clearly print name and address of where the unit is to be returned. 4. Pack unit securely to prevent damage in transit. If possible, use the original packing material. 5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or First Class Mail to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation, 6500 W. Cortland St., Chicago, IL 60707. 6. If the unit is in warranty, upon receipt of your unit it will either be repaired or exchanged depending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call 1.773.889.3087 for assistance. Cobra Electronics Corp.© 2001 Printed in China Part No. 25 NW MAN 25 NW LTD CLASSIC Operating Instructions for your Cobra 25 NW LTD CLASSIC CB Radio 25 NW LTD CL ASSIC RF GAIN DYNA “Ingenious Products for Easier Communication.” DIM The CB Story The Citizens Band lies between the shortwave broadcast and 10-meter Amateur radio bands, and was established by law in 1949. The Class D two-way communications service was opened in 1959. (CB also includes a Class A citizens band and Class C remote control frequencies.) 2 FCC Regulations 1 FCC regulations permit only “transmissions” (one party to another) rather than “broadcasts” (to a wide audience). Thus, advertising is not allowed on CB Channels because that is “broadcasting.” LTD CLASSIC RF SIG 1 3 5 79 +30dB OFF MIN MAX MIN FCC Warnings MAX All transmitter adjustments other than those supplied by the manufacturer as front panel operating controls, must be made by, or under the supervision of, the holder of an FCC-issued General Radio-Telephone Operator’s License. 3 CB Transceiver Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Cobra, may cause violation of the technical regulations of Part 95 of the FCC Rules, or violation of Type Acceptance requirements of Part 2 of the Rules. 4 You should read and understand Part 95 (included with this unit) of the FCC Rules and Regulations, before operating your Cobra radio, even though the FCC no longer requires you to obtain an operator’s license. 25 NW Operating Instructions for your Cobr What’s Included with Your 25 NW CB Radio 5 1. 2. 3. 4. 5. 25 NW RF GAIN DYNA DIM “Ingenious Products for Easier Communication.” A1 CB transceiver Microphone Transceiver bracket Microphone bracket Operating Manual 6. DC power cord 7. FCC rules 1. (not pictured) Controls and Indicators 1. 4-Pin Microphone Connector 2. Power On/Off/Volume 14 3. Squelch 4. RF Gain/DynaMike 5. Dim 6. Channel Selector 7. LED Channel Display 8. RX (Receive)/ TX (Transmit) LED Indicator 9. Channel 19/Channel 9/ Normal Switch 10. CB/PA Switch 11. NB/Off Switch 12 11 10 9 8 LTD CLASSIC 12. ANL/Off Switch 13 13. Signal Strength Meter 7 RF SIG 1 3 5 79 +30dB 14. Microphone Back Side OFF 15. Public Address Speaker Jack 1 16. External Speaker Jack MIN 2 MAX MIN 4 MAX 5 6 3 17. Antenna Connector 18. Power Jack 15 DATE OF MFG :JUNE 98 FCC ID:BBO3K229LTD COBRA ANT 16 PA.SP. EXT.SP. + POWER – MADE IN CHINA SERIAL NO.:806135776 PRECISION ENGINEERED PRODUCT OF COBRA ELECTRONICS CORP. CHICAGO, ILL.60707 17 A2 18 Our Thanks to You Thank you for purchasing the Cobra 25 NW CB Radio. Properly used, this Cobra product will give you many years of reliable service. Cobra Customer Service Customer Support Live operators are available M-F 8:00 am - 6:00 pm CST at: 773.889.3087 Should you encounter any problems with the product or not understand its many features, please refer to this owner’s manual. If , after referring to the manual, you still need help, call Cobra Customer Service at 773.889.3087. Automated Technical Assistance available 24 hours a day, seven days a week. E-mail questions to: [email protected] Cobra on the World Wide Web: Frequently Asked Questions (FAQ) can be found on-line at: www.cobraelectronics.com A3 ">
Advertisement