SCOTT SX 55 RD

SCOTT SX 55 RD
sx 55
STEREO RADIO CASSETTE PLAYER
WITH CD/MP3 PLAYER AND USB PORT
Instruction Manual
WARNING
CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
This product contains a low power laser device.
Warning: Do not touch the lens.
DO NOT THROW BATTERIES IN FIRE !
SAFETY PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on a carpet.
ON SAFETY
• When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage it and create hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord.
ON AC VOLTAGE
• Before use, check that the rated voltage of your unit matches your local voltage.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the CD player.
• When there is condensation inside the unit, the unit may not function normally.
• Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
* Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
* Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc..
* Do not place naked flame sources, such as lighted candles on the apparatus.
* Take attention to the environmental aspects of battery disposal.
* Use the apparatus only in moderate climates (not in tropical climates).
* Do not expose the apparatus to dripping or splashing.
* Do not place objects filled with liquids, such as vases, on the apparatus.
• Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during
intended use. To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall
be disconnected from the mains socket outlet completely.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightening flash with
arrowhead symbol within the
triangle is a warning sign
alerting the user of "dangerous voltage" inside the unit.
ATTENTION : To reduce the risk
of electric shock, do not remove the
cover. There are no user serviceable
parts inside the unit. Refer all servicing
to qualified personnel.
The exclamation point within
the triangle is a warning sign
alerting the user of important
instructions accompanying
the product.
In case of misfunction due to electrostatic discharge the apparatus has to be reset by disconnecting it from
mains supply.
THE MARKING PLATE IS LOCATED AT THE BOTTON OF ENCLOSURE OF THE APPARATUS.
GB 1
TABLE OF CONTENTS
WARNING…...……………………………………………………………………..
SAFETY PRECAUTIONS…………………………………………………………
TABLE OF CONTENTS…………………………………………………………..
BOX CONTENTS……..……………………………………………………………
LOCATION OF CONTROLS……………………………………………………...
POWER SUPPLY….………………………………………………………………
BASIC OPERATION..……………………………………………………………..
RADIO OPERATION………………………………………………………………
CD / MP3 / WMA PLAYER OPERATION……………………………….……….
USB DEVICE OPERATION……..………………………………………………..
AUX IN FUNCTION ………….……………………………………………………
CASSETTE PLAYER OPERATION …………………………………………….
MAINTENANCE……………………………………………………………………
TROUBLESHOOTING GUIDE…………………………………………………..
TECHNICAL SPECIFICATIONS…………………………………………………
BOX CONTENTS
1. Main Unit
2. AC power cord
3. Instruction Manual
LOCATION OF CONTROLS
1
2
3
4
5
6
7
8
9 10 11 12 13 14
15
16
17
18
19
20
21
22 23 30 24 25
26
1. NEXT
button
2. FOLDER UP button
3. CLOCK/ADJ, PROG (programmed play) button
4. CD compartment
5. ON/STANDBY button
6. FUNCTION button
7. PLAY MODE button
8. BAND button
9. TUNING dial
10. USB port
11. AUX IN jack
12. Headphone jack
13. Handle
14. +VOLUME- dial
15.
PREVIOUS button
27 28 29
GB 2
26
16. PLAY / PAUSE
button
17. STOP button
18. Cassette PAUSE button
19. Cassette STOP/EJECT
button
20. Cassette F.FWD
button
21. LCD display
22. Cassette REWIND
button
23. Cassette compartment
24. Cassette PLAY
button
25. Cassette RECORD button
26. Speaker
27. AC ~ socket
28. Battery compartment
29. FM antenna
30. FM ST LED indicator (FM stereo)
1
1
2
2
2
3
3
4
4
5
5
5
6
6
7
LCD DISPLAY
1. Tuner FM/AM mode
2. Digit and text display
3. MHz/kHz: Unit of FM/AM radio frequency
4. Play a CD/ read a USB device
5. USB mode
6. Random
7. Repeat folder
8. AUX IN mode
9. Cassette TAPE mode
5 12 4
2
8 10 9
15
13
1
11
14
7
6
10. CD playback
11. REPEAT 1/ALL
12. MP3 file 3
13. WMA file
14. Programmed play
15. PM: 12 hour display mode
POWER SUPPLY
Using the AC power supply
Insert the AC power cord into an AC mains outlet with a 230V AC ~ 50Hz power source and insert the other
end into the AC ~ socket at the back of the unit.
Using batteries
1. Open the battery compartment.
2. Insert 6 UM2/ “C” size batteries (not supplied) with the polarities (+/-) matching the markings in the
battery compartment. Reversed batteries may damage the unit.
3. Close the battery compartment.
Note: When AC power is supplied, the battery power is cut off automatically.
Precautions when using batteries
1. Use only the size and type of batteries specified.
2. Do not mix different types of batteries together (e.g. alkaline, rechargeable and standard (carbon zinc)) or old batteries with fresh ones.
3. Exhausted batteries must be removed to prevent any battery leakage.
4. Dispose of batteries properly according to environmental regulations.
BASIC OPERATION
ON/ Standby mode
Press the ON/STANDBY button to turn on the unit and press it again to go to standby mode.
Clock time setting
1. In standby mode, press the CLOCK/ADJ button and the "24H" digits will flash.
2. Press the
/
buttons to select 24 hour or 12 hour display mode and then press the CLOCK/ADJ
button to confirm. The hour digits will flash.
3. Press the
/
buttons to set the hour.
4. Press the CLOCK/ADJ button to confirm and the minute digits will flash.
5. Press the
/
buttons to set the minutes.
6. Press the CLOCK/ADJ button again to confirm the time setting.
Selecting the source
When the unit is switched on, press the FUNCTION button repeatedly to select one of the following sources:
CD, USB, TUNER, AUX or TAPE.
VOLUME control
Turn the -VOLUME+ dial to adjust the volume level.
Connecting headphones
Plug in headphones (not supplied) to the headphones jack at the back of the unit for private listening. The
speaker output will be shut off automatically.
GB 3
RADIO OPERATION
Listening to the radio
1. When the unit is switched on, press the FUNCTION button to select TUNER mode.
2. In tuner mode, press the BAND button to select FM or AM.
3. Turn the TUNING dial to receive a station. The radio frequency
is indicated on the LCD display.
FM Stereo mode
In FM mode, the FM ST LED indicator lights up when the unit receives a station with a strong signal and
stereo sound
Achieving optimum reception
In FM mode, extend and position the FM antenna to achieve optimum reception.
In AM mode, orientate the main unit to achieve optimum reception.
CD/ MP3 / WMA player OPERATION
Start playback
1. Open the CD compartment.
2. Insert a disc with the label side facing up.
3. Close the CD compartment.
4. When the unit is switched on, press the FUNCTION button to select “CD”. It will read the disc and after reading, the total number of tracks will be displayed.
Press the button to start playback from the first track.
During playback, the track number will be displayed.
Pause playback
Press the button to pause playback, The “►” symbol will flash. Press this button again to resume
playback.
Stop playback
Press the button to stop playback. Press the button to start playback from the first track.
Search function
Skip to the next/ previous track
1. Press the
button to skip to the next track.
2. Press the button once to skip to the beginning of the current track. Press it twice to skip to the
previous track.
Search within a track
During playback, hold down the or button to go fast backwards or forwards and then release the
button. Normal playback will resume from that point.
Skip to the next folder (for MP3/ WMA files only)
Press the FOLDER UP button to skip to the next folder.
REPEAT/RANDOM playback
During playback, press the PLAY MODE button repeatedly to select the playback mode according to the
following table:
File
CD
MP3/WMA
files
Playback mode
Repeat One (“REP ” flashes on the display), - Repeat All ( “REP”)
lights up on the display), Random ( “MIX” appears on the display).
Repeat One (“REP” flashes), Repeat Folder ( “ REP FOLDER ”
appears on the display), Repeat All ( “REP” appears on the
display), Random ( “MIX” appears on the display)
GB 4
Programmed playback
You can program up to 20 tracks.
1. In STOP mode, press the PROG button and the track number “P01” will flash.
2. Press the
/
buttons to select the track number.
3. Press the PROG button to confirm.
4. Repeat steps 2 and 3 above to program other tracks.
5. To play the program, press the button.
6. To clear the program, press the button twice or open/close the CD compartment or go to
standby mode.
When programming a CD containing MP3 / WMA files,
you can press the FOLDER UP button to select the folder
in which you want to program the tracks.
USB DEVICE OPERATION
Insert a USB device into the USB port at the back of the unit. When the unit is switched on, press the
FUNCTION button repeatedly to select the "USB" mode. Refer to “CD/ MP3 / WMA PLAYER OPERATION”
to play MP3/ WMA files.
Note: Due to technical differences, some models of USB storage
devices or MP3 players may take longer to be read. In some cases, they may not even be read.
AUX IN FUNCTION
This unit has an AUX IN jack which allows you to connect an external audio device (such as an MP3 player)
using a cable.
1. Plug an audio cable (not supplied) into the AUX IN jack.
2. When the unit is switched on, press the FUNCTION button to select “AUX”.
3. Operate your external audio device as usual to select and play music.
4. Adjust the volume controls on both your external audio device and this unit to the desired volume level.
Note: In AUX IN mode, this unit display cannot show any music information (e.g. track number) for your external audio device.
CASSETTE TAPE OPERATION
Cassette tape playback
1. When the unit is switched on, press the FUNCTION button to select “TAPE” (cassette).
2. Press the STOP/EJECT
button to open the cassette compartment.
3. Gently insert the cassette tape into the cassette compartment as shown.
Note: The cassette compartment door is designed to prevent the user from
inserting the cassette upside down. Improper cassette tape insertion may
damage the cassette deck inside the unit.
4. Close the cassette compartment.
5. To start playback, press the PLAY
button.
6. To stop playback, press the STOP/EJECT
button.
7. To pause playback, press the PAUSE button. To resume playback, press it again.
8. To fast forward or fast rewind, press the F.FWD
or REWIND
button.
Press the STOP/EJECT
button to stop at the desired position.
Cassette tape recording
1. When the unit is switched on, press the FUNCTION button to select the mode (CD, TUNER or AUX) and launch playback.
2. Insert the cassette tape (see previous paragraph).
3. Press the PAUSE button.
4. Press the RECORD and PLAY buttons together to place recording in standby.
5. Press the PAUSE button again to start recording.
6. To stop recording, press the STOP/EJECT button.
7. To pause recording, press the PAUSE button. To resume recording, press it again.
GB 5
To erase a recorded cassette tape
1. Follow steps 1 to 5 in “Cassette tape playback” to play the cassette tape.
2. Press the RECORD and PLAY buttons together to start erasing.
3. To stop erasing, press the STOP/EJECT button.
Cleaning the tape heads
To maintain optimum sound quality, clean the pinch roller (a), capstan (b),
playback/record heads (c) and erasure head (d) regularly (every 10
hours of use). Use a cotton swab lightly moistened with cleaning fluid
or denatured alcohol.
a
b
c
d
MAINTENANCE
Care and maintenance
To clean the unit, unplug it and wipe off dust and stains with a soft cloth moistened with a mild soap and water
solution only. Do not use benzene, thinner or similar chemicals to clean the unit.
Cleaning CD discs
If the music skips or does not play, the disc may need cleaning. Before playback, wipe the disc from the center
out with a clean cloth. After use, store the disc in its case.
If at any time in the future you should need to dispose of this product please note that Waste
electrical products should not be disposed of with household waste.Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)
TROUBLESHOOTING GUIDE
Problems
Recommendations
1. The player or display
1.1 Press the ON/STANDBY
button to go to standby mode
does not work properly.
and press it again to turn on the unit.
1.2 Reset by unplugging the AC power cord for few seconds, then
plug it back in.
2. The disc does not play. 2.1 Place the disc with the label side facing up.
2.2 Ensure that the disc is free from scratches and fingerprints.
2.3 Check that the discs/ file formats are compatible; refer to
“TECHNICAL SPECIFICATIONS”.
2.4 Clean the disc.
3. USB device is not read. 3.1 Check that the USB device file system is in FAT or FAT32
format.
3.2 Due to different formats, some models of USB storage devices
or MP3 players may not be read.
4. Noise or distorted
4.1 FM mode: extend and position the FM antenna to achieve the
sound in radio mode.
best reception.
4.2 In AM mode, orientate the unit to achieve optimum reception.
GB 6
TECHNICAL SPECIFICATIONS
CD/ USB
Compatible discs and files USB port type
USB maximum handling capacity
Radio
Tuning range
Antennas CD, CD-R/RW, CD-DA, MP3 and WMA
2.0
4GB
FM: 88 – 108 MHz
AM: 531 – 1620 kHz
FM: telescopic antenna
AM: built-in ferrite bar
Cassette
Recording system
Erasing system
Tape speed
AC bias
Magnetic erase
4.75 cm / sec.
General
Output power (RMS)
Power consumption
Speakers
Power source
Dimension
Weight
2 x 1.2 W (AC power)
2 X 1 W (battery power supply)
9W
3” diameter, 8 Ohm impedance
AC 230V ~ 50Hz
DC 9V: 6 x 1.5V batteries UM2/”C” size
168 (H) x 262 (W) x 268 (D) mm
2.1 Kg
Note: Due to continuing improvements, the technical specifications are subject to change without notice.
Where to place the item :
Today’s furniture is coated with a wide variety of lacquers and synthetic-coatings that are treated with an
extensive range of cleaning products. Therefore, the possibility that some of these substances contain components that react adversely to the rubber feet of the item and soften them, cannot be completely excluded.
The rubber feet of the appliance can cause discoloring to furniture surfaces. If necessary, place the appliance
on a non-slide surface.
GB 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement