BG-C6 USER`S MANU AL

BG-C6 USER`S MANU AL
BG-C6
BATTERY GRIP
Designed for the Canon
EOS 60D SLR Camera
Introduction
Thank you for choosing Vello and congratulations on
your new BG-C6 battery grip purchase. Enjoy the many
benefits that a battery grip offers, such as extended
shooting time and more control and comfort when
shooting in a vertical (portrait) orientation.
The Vello BG-C6 is compatible with the Canon EOS
60D SLR camera. The BG-C6 accepts two Canon LP-E6
rechargeable batteries, or six AA batteries (alkaline, NiMH, lithium, or nickel-manganese) can be used instead
for added convenience. The BG-C6 is equipped with an
alternate shutter-release button, AF point selection, AE
lock/FE lock button, AF Start, and main dial for shooting
in a vertical position.
2
Please read through this entire manual before
using the BG-C6 battery grip.
2. Only
use with batteries and battery holders
recommended in this manual.
3.
Cover the power terminals with the contact cap
when the BG-C6 is not in use. This prevents electrical
shorts caused by metal objects touching the power
terminals.
4. When the battery holder is removed from the
grip, remove the batteries or place the holder in
a container to prevent electrical shorts caused by
contact with other metal objects.
5.
Remove the batteries and take the device to a Vello
authorized reseller.
6.
Turn the grip power off when not shooting vertically.
7.
The battery level may not display properly if batteries
are inserted before mounting the grip.
8. Remove batteries from the grip when not in use.
9.
Do not attempt to disassemble.
10.Avoid water or extreme humidity and keep in a dry
INTRODUCTION
The BG-C6 should only be used with compatible
devices specified in this manual.
and cool place.
11.Keep out of reach of children.
If you notice smoke, an unusual smell or noise from
the battery pack, discontinue use immediately.
3
ASSEMBLY
1.
OVERVIEW
Precautions
Overview
12
17
16
11
10
2
1
9
4
18
15
8
3
7
6
13
5
14
4
Attachment Wheel
Secures the grip to the camera.
3
4
Battery Compartment Cover
5 DC Coupler Cord Mount
Groove for use with the Canon AC
Power Adapter (ACK-E6).
6
AF Point Selection/Magnify Button*
7
AE Lock/FE Lock/Index/Reduce
Button*
Camera Battery Chamber Cover
Holder
Stores the cover when the grip is
mounted.
11 Electrical Contacts
Communicates with the camera’s
electronics.
12 C
ontact Cap
Protects grip contacts. Keep covered
when the grip is not in use.
13
Battery Holder
Holds up to two Canon LP-E6
batteries.
AA Battery Holder
Holder for six AA batteries.
14
8
AF Start Button
15
Main Dial*
16
Shutter-Release Button*
17
Tripod Socket
10
5
INTRODUCTION
B
G-C6 Grip Power ON/OFF
For mounting on a tripod.
18
Hand Strap Mount
Optional hand strap may be mounted
OVERVIEW
Guide Pin
Helps align the camera to the grip.
2
9
for a secure hold while shooting.
* Performs the same function as on the
camera.
ASSEMBLY
1 Mounting Screw Aligns with the camera’s tripod socket.
Attaching The Grip
1.
Ensure that the power is
turned off on the camera
and that the power switch
is set to OFF on the battery
grip.
2. R e m o v e
the bat ter y
from the camera battery
compartment.
6
3.
Open the camera battery
chamber cover at a 35º
angle and gently pull
the cover to remove it.
INTRODUCTION
A
camera battery chamber
cover into the BG - C6
battery chamber holder A .
To remove the cover, press
lightly on the cover hinge B
and pull it up at an angle C .
5.
Remove the protec tive
cap and connect the BGC6 grip to the camera,
while aligning the grip’s
mounting screw with the
camera’s tripod socket.
7
6.
Rotate the at tachment
wheel in the direc tion
shown by the arrow until it
is firmly tightened.
When removing the grip, turn
the camera power off, remove
batteries, and replace protective
contact cap.
ASSEMBLY
4. To prevent loss, slide the
OVERVIEW
C
B
Inserting Batteries
A
B
B
B
A
A
C
1.
Ensure that the power
i s t u r n e d of f o n t h e
camera and grip. Pull the
lever down A and twist
counter-clockwise B to
open the battery chamber
door. Press both release
levers outward and
remove the battery holder
C.
2. Canon
LP-E6 Batteries:
Insert up to two batteries
by orienting the arrow on
the batter y toward the
interior of the holder. Press
the front of the battery
down A and slide forward
while pressing on the back
of the battery B .
8
3.
A A Batteries: Place six
new AA batteries of the
same type into the AA
battery holder as shown,
while ensuring that they are
in the correct orientation.
INTRODUCTION
Ensure that camera power is
turned off before mounting DC
coupler. Ensure that the DC
cord doesn’t get pinched by the
battery holder.
A
the battery holder
into the grip, twist the
lever clockwise to lock,
and flip it up to secure it.
5.
Switch the grip power to
ON and then turn on the
camera’s power. Check the
battery level in the control
panel or viewfinder.
9
6.
Household Power Outlet:
To m o u nt t h e C a n o n
AC K- E6 AC Powe r
Ad a pt e r K i t (so l d
separately), insert the DC
coupler into the side of the
handler with the release
lever just like a battery.
Pass the cord through
the groove on the back of
the grip.
ASSEMBLY
4. Slide
OVERVIEW
B
Specifications
Power Source
1.
2.
3.
One or two Canon LP-E6 rechargeable Li-ion batteries
Six AA/LR6 Alkaline batteries
Works with the Canon AC Adapter Kit (ACK-E6)
Operating Temperature
32º – 104° F (0 – 40° C)
Dimensions
5.7" × 4.4" × 3.4" (145.6 × 111.3 × 85.3 mm)
Weight
10.4 oz. (295 g) (excluding holder and batteries)
Specifications and design are subject to change without notice.
AA batteries do not provide as much shooting time as LP-E6 rechargeable batteries. Performance of AA batteries may also be dependent on brand
and storage conditions. AA batteries may not function under 68º F (20º C).
Please note: When using the AA battery tray, the battery indicator will only work with Ni-MH batteries.
This product is not compatible with Duracell® brand alkaline batteries.
10
ONE-YEAR LIMITED WARRANTY
This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship
under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty
shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal
use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s)
shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves
the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of
purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group. © 2015 Gradus Group LLC. All Rights Reserved.
www.vellogear.com
© Copyright 2015 Gradus Group LLC
All other trademarks are the property of their respective owners
GG3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising