advertisement
Always there to help you
Register your product and get support at www.philips.com/welcome
Question?
Contact
Philips
DC291
EN User manual
ES Manual del usuario
FR Mode d’emploi
3
23
43
Canada
English:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This Class B digital apparatus complies with Canadian ICES-003.
Français:
Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des
Communications du Canada. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
L’appareil est conforme à la réglementation FCC, section 15, et à la norme
21 CFR 1040.10. Son utilisation est soumise à deux conditions :
1. L’appareil ne doit pas provoquer d’interférences nuisibles, et
2. L’appareil doit supporter les interférences reçues, y compris les interférences empêchant son fonctionnement correct.
Contents
1 Important 6
2 Your Docking Entertainment System 9
Overview of the remote control
3 Get started
4 Play
12
14
5 Listen to radio
Program radio stations automatically
Program radio stations manually
6 Other features
7 Adjust sound
17
16
19
8 Product information
9 Troubleshooting
19
20
EN 3
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below,so don't miss out.
Register online at www.philips.com/welcome to ensure:
*Proof of *Product Safety *Additional Benefits
*Product Safety Notification
Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty
*Additional Benefits
By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.
saving offers.
Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers.
service.
Congratulations on your purchase, and welcome to the “family!”
Thank you for your confidence in PHILIPS.You’ve selected one of the best-built, best-backed products available today.We’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.What’s more, your purchase guarantees you’ll receive all the information and special offers for which to accessories from our convenient home shopping network.
home shopping network.
Most importantly, you can count on our uncompromising commit-
Most importantly, you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing
All of this is our way of saying welcome - and thanks for investing in a PHILIPS product.
Know these
safety
symbols
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
P.S. To get the most from your PHILIPS purchase, be
P.S. To get the most from your PHILIPS purchase, be
Card at once, or register online at: www.philips.com/welcome
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.
Model No.__________________________
Serial No.
________________________
4 EN
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period. At its option, Philips will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory, or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Philips’ property. When a refund is given, your product becomes Philips’ property.
Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.
Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or a part that has been modified without the written permission of
Philips, or (d) if any Philips serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product to Philips.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of Philips.
• Damage or claims for products not being available for use, or for lost data or lost software.
• Damage from mishandled shipments or transit accidents when returning product to Philips.
• A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-866-309-0845
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248
3140 035 51091
EN 5
6 EN
1 Important
Safety
Important Safety Instructions a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
k Only use attachments/accessories specified by the manufacturer.
l Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. m Unplug this apparatus during lightning storms or when unused for long periods of time. n Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus:
• Install all batteries correctly, + and - as marked on the apparatus.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
p Apparatus shall not be exposed to dripping or splashing.
q Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). r This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.
s Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss.
• Sound can be deceiving. Over time your hearing ‘comfort level’ adapts to higher volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even at normally ‘safe’ levels, can also cause hearing loss.
• Be sure to use your equipment reasonably and take appropriate breaks.
Be sure to observe the following guidelines when using your headphones.
• Listen at reasonable volumes for reasonable periods of time.
• Be careful not to adjust the volume as your hearing adapts.
• Do not turn up the volume so high that you can’t hear what’s around you.
• You should use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical equipment.
• Keep this apparatus away from direct sunlight, naked flames or heat.
• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.
Notice
Any changes or modifications made to this device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
Notice for the USA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
EN 7
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC’s and IC’s
RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device
(excluding its handset) and users.
Disposal of your old product and batteries
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
The correct disposal of these products helps prevent potentially negative consequences on the environment and human health.
Your product contains batteries, which cannot be disposed of with normal household waste.
Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health.
Please visit www.recycle.philips.com for additional information on a recycling center in your area.
Caution
• Removal of the built-in battery invalidates the warranty and may destroy the product.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
“Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.
CLASS II apparatus with double insulation, and no protective earth provided
8 EN
2 Your Docking
Entertainment
System
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from iPod, iPhone, iPad, radio, or other audio devices.
The radio, iPod, iPhone, or iPad can be set as the alarm timer. You can set two alarm timers to go off at different time.
What’s in the box
Check and identify the contents of your package:
• Main unit
• Remote control
• 1 x MP3 link cable
• User manual
• Quick start guide
• Rubber pad for iPad 2
EN 9
10 EN a b c d e f
DATE
SLEEP
SET TIME
PROG
ALARM 1
Overview of the main unit
AC ~ a /DATE
• View the clock time and date.
b SLEEP
• Set the sleep timer.
c /
• Search within an audio file.
• Tune to a radio station.
d /SET TIME/PROG
• Set the clock and date.
• Program radio stations.
DOCKING SYSTEM FOR
BUZZER MP3 LINK FM
ANTENNA
ALARM 2 e
SOURCE
VOL
VOL
• Turn on the unit or switch to standby mode.
• Deactivate the sleep timer.
• Stop alarm.
f ALARM 1/ALARM 2
• Set the alarm timer.
• Turn off the alarm tone.
• View alarm settings.
g Display panel
• Show the current status.
o n m l k j i h g
h REPEAT ALARM/BRIGHTNESS
CONTROL
• Repeat the alarm.
• Adjust the display brightness.
i SOURCE
• Select a source: iPod/iPhone/iPad,
FM tuner or MP3 link.
j OK/
• Start or pause iPod/iPhone/iPad play.
• Confirm selection.
• Select FM stereo or FM mono.
k /
• Skip to the previous/next audio file.
• Select a preset radio station.
• Adjust time.
l VOL +/-
• Adjust volume.
m Dock for iPod/iPhone/iPad
• Load an iPod/iPhone/iPad.
n FM antenna
• Improve FM reception.
o MP3-LINK
• Jack for an external audio device.
EN 11
REP ALM
Overview of the remote control a b c d e f g h i j k l
POWER
MENU
SLEEP
DBB
DSC
ALM 1
OK
MP 3 LINK
BRIGHTNESS
TUNER
SET TIME
PROG
MUTE
VOL
ALM 2 a POWER
• Turn on the unit or switch to standby mode.
• Stop alarm.
• Deactivate the sleep timer.
b DOCK
• Select iPhone/iPod/iPad source.
p o n m
c /
• Skip to the previous/next audio file.
• Select a preset radio station.
• Navigate through the iPod/iPhone/ iPad menu.
• Adjust time.
d /
• Search within an audio file.
• Tune to a radio station.
e OK/
• Start or pause iPod/iPhone/iPad play.
• Confirm selection.
• Select FM stereo or FM mono.
f MP3 LINK
• Select external audio device source.
g MENU
• Select the iPhone/iPod menu.
h SLEEP
• Set the sleep timer.
i BRIGHTNESS/REP ALM
• Adjust the display brightness.
• Repeat the alarm.
j DBB
• Turn on or off dynamic bass enhancement.
k DSC
• Select a preset sound setting.
l ALM 1/ALM 2
• Set the alarm timer.
• Turn off the alarm tone.
• View alarm settings.
m VOL +/-
• Adjust volume.
n MUTE
• Mute volume.
o SET TIME/PROG
• Set the clock and date.
• Program radio stations.
p TUNER
• Select the tuner source.
12 EN
3 Get started
Caution
• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
• You can only use AC power as power supply.
Batteries (not supplied) are for backup purpose.
Install batteries
2 x AA
2 x AA
Note
1
Open the battery compartment.
2
Insert 2 x R6/UM-3/AA size batteries with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
• Remove battery if it is exhausted or will not be used for a long time.
• Batteries contain chemical substances, so they should be disposed of properly.
• Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate.
• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
Note
• Before you press any function button on the remote control, first select the correct source with the remote control.
• If you are not going to use the remote control for a long time, remove the batteries.
Connect power
Caution
• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the socket. Never pull the cord.
• Before connecting the AC power cord, ensure you have completed all other connections.
Note
• The type plate is located on the bottom of the main unit.
MP3 LINK FM
ANTENNA
1
Connect the AC power cord to the wall outlet.
Set time and date
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
» Hour digits start to blink.
2
Press format.
to select the 12/24 hour
3
Press / to set the hour.
4
Press SET TIME/PROG to confirm.
» The minute digits begin to blink.
5
Repeat steps 3-4 to set the minute, year, month, and day.
Tip
• In 12 hour format, [MONTH--DAY] is displayed.
• in 24 hour format, [DAY--MONTH] is displayed.
EN 13
Turn on
1
Press
» The unit switches to the last selected source.
Switch to standby
1
Press standby mode.
» The time and date (if set) appear on the display panel.
4 Play
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad through this unit.
Compatible iPod/iPhone/iPad
Apple iPod and iPhone models with a 30-pin dock connector.
• iPod Touch 1st generation
• iPod Touch 2nd generation
• iPod Touch 3rd generation
• iPod Touch 4th generation
• iPod nano 1st generation
• iPod nano 2nd generation
• iPod nano 3rd generation
• iPod nano 4th generation
• iPod nano 5th generation
• iPod nano 6th generation
• iPod mini.
• iPhone
• iPhone 3G
• iPhone 3GS
• iPhone 4
• iPad
14 EN
Listen to the iPod/iPhone/iPad
1
Press
2
Place the iPhone/iPod/iPad into the dock.
• To pause/resume play, press OK/ .
• To skip to a track, press / .
• To search during play, press and hold / , then release to resume normal play.
• To go back to the previous iPod/ iPhone menu, press MENU.
• To scroll through the menu, press / .
• To confirm a selection, press OK/ .
» If no key is pressed for more than
10 seconds, OK/ acts back as the play/pause key.
Install the rubber pad
If necessary, install the supplied rubber pad to keep the iPad 2 stable before you place the iPad 2.
Charge the iPod/iPhone/iPad
When the unit is connected to power, the docked iPod/iPhone/iPad begins to charge.
Tip
• For certain iPod models, it may take up to a minute before the charging indication appears.
• If clock is not manually set, when iPhone/iPod/ ipad is connected, the clock radio synchronizes time from the iPhone/iPod/iPad automatically.
EN 15
Note
• iPod with color display, iPod classic, and iPod with video are not compatible with dock charging.
Play from an external device
You can also listen to an external audio device through this unit.
1
Press source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the back of the unit.
• the headphone jack on an external device.
3
Start to play the device (see the device user manual).
5 Listen to radio
Note
• Only FM radio reception is available on this unit.
Tune to a radio station
Tip
• Position the antenna as far as possible from TV,
VCR or other radiation source.
Note
• For optimal reception, fully extend and adjust the position of the antenna.
1
Press
2
Press and hold / for more than
2 seconds.
» [Srch] (search) is displayed.
» The radio tunes to a station with strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/ repeatedly until you find optimal reception.
Program radio stations automatically
You can program a maximum of 20 preset radio stations.
1
In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to activate automatic program mode.
» [AUTO] (auto) is displayed.
16 EN
» The unit automatically stores radio stations with sufficient signal strength.
» The first programmed radio station is broadcast automatically.
Program radio stations manually
You can program a maximum of 20 preset radio stations.
1
Tune to a radio station.
2
Press program mode.
3
Press / to select a number.
4
Press
5
Repeat the above steps to program other stations.
Tip
• To overwrite a programmed station, store another station in its place.
• To select FM stereo or FM mono, press OK.
Select a preset radio station
1
Press / to select a preset number.
6 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1
Ensure that you have set the clock correctly. (See “Get started - Set time and date”.)
2
Press and hold ALM 1 or ALM 2 for
2 seconds.
» [AL 1] or [AL 2] begin to blink.
3
Press SOURCE on the top panel to select an alarm sound source: iPod/iPhone/iPad,
FM tuner, or buzzer.
4
Press ALM 1 or ALM 2.
» The hour digits begin to blink.
5
Press / repeatedly to set the hour.
6
Press ALM 1 or ALM 2 to confirm.
» The minute digits begin to blink.
7
Repeat steps 5-6 to set the minute.
8
Repeat steps 5-6 to select whether to ring alarm the whole week, on weekdays, or at weekend.
9
Repeat steps 5-6 to set the alarm volume.
Tip
• If you set iPhone/iPod playlist as the sound source, you must create a playlist in iTunes called
“PHILIPS” and import it to your iPhone/iPod.
• If no playlist is created in the iPod/iPhone or there is no song in the playlist, the unit will wake to songs in the iPod/iPhone.
EN 17
Activate and deactivate the alarm timer
1
Press activate or deactivate the timer.
» If the timer is activated, [ AL 1] or
[ AL2] is displayed.
» If the timer is deactivated, [ AL1] or
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes later.
Tip
• You can press / to adjust the interval to repeat alarm.
Stop alarm ring
1
When the alarm rings, press the corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm settings remain.
View the alarm settings
1
Press
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1
Press period of time (in minutes).
» When the sleep timer is activated, the display shows , and the volume will gradually decrease in the last 5 minutes.
To deactivate sleep timer
1
Press is displayed.
» When the sleep timer is deactivated,
disappears on the display.
Adjust display brightness
1
Press to select different levels of display brightness.
18 EN
7 Adjust sound
Adjust volume level
1
During play, press VOL +/- to increase/ decrease the volume level.
Mute sound
1
During play, press MUTE to mute/unmute sound.
Select a preset sound effect
1
During play, press DSC repeatedly to select:
• [ROCK] (rock)
• [JAZZ] (jazz)
• [POP] (pop)
• [CLASSIC] (classic)
• [FLAT] (flat)
Enhance bass
1
During play, press DBB to turn on or off dynamic bass enhancement.
» If DBB is activated, [DBB] is displayed.
8 Product information
Note
• Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power 2 x 5 W RMS
Frequency Response 20 -20000 Hz, -3dB
Signal to Noise Ratio >67 dB
Aux Input (MP3 link) 0.5 V RMS 20kohm
FM
Tuning Range
Tuning grid
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Sensitivity
Total Harmonic
Distortion
Signal to Noise Ratio
FM 87.5 - 108 MHz
100 KHz
<22 dBf
<43 dBf
<28dBf
<2%
>55 dB
Speakers
Speaker Impedance 4 ohm
Speaker Driver
Sensitivity
57mm
>84dB/m/W
EN 19
General information
AC power
Operation Power
Consumption
Standby Power Consumption
(clock display)
Dimensions
- Main Unit (W x H x D)
Weight
- With Packing
- Main Unit
120V~,60Hz
7.5 W
<1 W
263 x114 x
165 mm
2.4 kg
1.4 kg
9 Troubleshooting
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site
(www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
No power
• Ensure that the AC power plug of the unit is connected properly.
• Ensure that there is power at the AC outlet.
• Ensure that the batteries are inserted correctly.
No sound
• Adjust the volume.
No response from the unit
• Disconnect and reconnect the AC power plug, then turn on the unit again.
Poor radio reception
• Increase the distance between the unit and your TV or VCR.
• Fully extend the FM antenna.
Timer does not work
• Set the clock correctly.
• Switch on the timer.
Clock/timer setting erased
• Power has been interrupted or the power plug has been disconnected.
• Reset the clock/timer.
20 EN
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
DC291_37_UM_V7.1
P&F USA Inc.
PO Box 2248
Alpharetta, GA 30023-2248
Phone 1 866 309 0845
Meet Philips at the Internet http://www.philips.com/welcome
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Aluminium