Testing and measuring instruments
Testing and measuring instruments
Product group index
Believe your eyes: Testing and measuring instruments
from Greenlee deliver highly-precise readings every single day.
We guarantee this with the Limited Lifetime Warranty.“
Sebastian Hoppe,
Quality Assurance
614
Testing and measuring instruments
Product group index
Voltage testers
616
Digital multimeter
620
Clamp meters
634
VDE testing instruments
646
Temperature gauges
650
Cable and conductor identifiers
654
Network, measuring devices and testers
656
615
Measuring and testing
up to 1000 V.
Voltage testers for distribution
boards, meters, control panels etc.
Fast testing for the presence of voltage. Suitable for measuring
DC or AC voltage.
Some of the devices output warning signals, some feature
a patented phase sequence indicator display.
The voltage ranges are from 5 to 1000 volts, depending on
the device and the testing category.
If handled correctly, we offer a lifetime
limited warranty on these products.
◾ For fast contactless voltage testing
(EF function).
◾ For DC and AC voltage.
◾ Also with polarity display.
◾ Detachable measuring tips for a range
of applications.
◾ FI resolution function.
◾ 2-pole rotary field display, 1-pole
phase test.
◾ Continuity test.
◾ Voltage measurement without battery.
616
■ Fast testing at AC voltage 5 – 1000 Volt: GT-16
▸ Fast and contactless testing with adjustable
sensitivity.
▸ With an optical and acoustic signal.
▸ Integrated On/Off switch.
▸ Handy pin design for any jacket pocket.
Benefits:
▸ Fast and easy testing of various voltage ranges.
▸ Increased battery life by disabling the stand-by
function.
▸ The voltage tester is always to hand.
■ Includes phase sequence indicator display: GT-85NE
▸ With patented phase sequence indicator display.
▸ Also for resistance measurements.
▸ With diode test.
▸ Removable tips.
Benefits:
▸ Just one measuring device for several types of
measurement.
▸ Flexible application with wall outlets, SchuKo-compatible
(19 mm clearance) and terminals.
▸ Unique measuring point illumination for working in poor
lighting conditions.
Display
FI resolution
Phase rotation
display
Continuity test
Single pole
phase test
Measurement
without battery
CAT IV / 1000 V
LED
5 - 1000 AC
CAT IV / 1000 V
LED
GT-55NE
6 - 690V AC/DC
CAT III / 1000 V
CAT IV / 600 V
LED
GT-85NE
6 - 690V AC/DC
CAT III / 1000 V
CAT IV / 600 V
LCD
GT-12A
GT-16
Category/
voltage
50 - 1000 AC
Voltage range
Contactless
■ Features of testers
617
Testing and measuring instruments
Voltage testers
52063422grp
GT-12A Contactless
voltage tester 50 - 1000 V
Characteristics
▪ Fast, easy, contactless voltage testing
▪ Clear LED and acoustic warning signal when the voltage has been determined
▪ ON/OFF switch provides longer battery service life
▪ Handy pen format, which fits easily into a jacket or tool pocket
▪ Rubber-coated comfort handle
▪ Fast, easy replacement of batteries
▪ Automatic self test
Technical data
Frequency range
50 - 500 Hz
Voltage range
50 - 1000 V AC
Measuring category
CAT IV 1000V
Item
GT-12A Contactless voltage tester 50 - 1000 V
Scope of supply
Battery 2 x 1.5 V AAA
Part No.
52063422
Part No.
Page
52033580grp
GT-16 Adjustable, contactless voltage tester 5 - 1000 V
Characteristics
▪ Fast, easy, contactless voltage testing
▪ Clear LED and acoustic warning signal when the voltage has been determined
▪ ON/OFF switch provides longer battery service life
▪ Handy pen format, which fits easily into a jacket or tool pocket
▪ Ergonomically shaped comfort handle
▪ Fast, easy replacement of batteries
▪ Automatic self test
▪ Adjustable sensibility by rotary switch
Technical data
Frequency range
50 - 500 Hz
Voltage range
5 - 1000 V AC
Measuring category
CAT III 600V, CAT IV 1000V
Item
GT-16 Adjustable, contactless voltage tester 5 - 1000 V
Scope of supply
Battery 1 x 1.5 V AAA
618
Part No.
52033580
Part No.
Page
Testing and measuring instruments
Voltage testers
52049408grp
GT-55NE Bipolar voltage tester with LED display
Characteristics
▪ LED display 12, 24, 50, 120, 230, 400, 750 V AC/DC
▪ Power LED for measuring point illumination
▪ Display of AC and DC voltage
▪ Bipolar rotary field testing
▪ Unipolar phase testing, optical and acoustic
▪ Continuity check, optical and acoustic
▪ Diode test
▪ Polarity indicator, loud beeper
▪ IP 2X contact protection
▪ IP 65 spray water protected and dust-proof
Technical data
Voltage range
12 - 750 V AC/DC
Frequency
45 - 65 Hz
Measuring category
CAT III 1000V, CAT IV 600V
Item
GT-55NE bipolar voltage tester with LED display
Scope of supply
Battery 2 x 1.5 V AAA
Part No.
52049408
Part No.
Page
Accessories
TC-30 Nylon carrying case for measuring instruments with belt loop
Part No.
50075365
Page
645
Replacement tips
52034234
52049407grp
GT-85NE Bipolar voltage tester with LCD display
Characteristics
▪ LCD display with background illumination
▪ Actual resistance measurement up to 2 KΩ
▪ Power LED for measuring point illumination
▪ Display of AC and DC voltage
▪ Bipolar rotary field testing
▪ Unipolar phase testing, optical and acoustic
▪ Continuity check, optical and acoustic
▪ Diode test
▪ Polarity indicator, loud beeper
▪ IP 2X contact protection
▪ IP65 - spray water protected and dust-proof
Technical data
Voltage range
12 - 750 V AC/DC
Resistance
0 - 2 KΩ
Frequency
0 - 65 Hz
Measuring category
CAT III 1000V, CAT IV 600V
Item
GT-85NE Bipolar voltage tester with LCD display
Scope of supply
Battery 2 x 1.5 V AAA
Part No.
52049407
Part No.
Page
Accessories
TC-30 Nylon carrying case for measuring instruments with belt loop
Part No.
50075365
Page
645
Replacement tips
52034234
619
Digital
all-rounder.
Multimeters for every application.
Measuring, detecting, testing: These terms can be used to
describe the complex performance spectrum of our digital
multimeters. Their numerous functions make these devices
genuine all-rounders.
The following areas reflect various applications of the
multimeters:
▸ Multimeter for electrical and telecommunication.
▸ For vehicle electrics.
▸ For air-conditioning systems.
▸ For laboratory and field use.
If handled correctly, we offer a lifetime
limited warranty on these products.
◾ For DC and AC.
◾ For DC and AC voltage.
◾ With digital and analogue display.
◾ For measuring categories II, III and IV.
◾ With true effective value measurement.
◾ For frequency, capacity and resistance
measurement.
620
■ Specifically for electricians: DM-200A
▸ Optical RS 232 and USB interface.
▸ Automatic range selection and data hold function.
▸ Contactless voltage detection (EF function).
▸ Large, backlit display.
▸ Automatic shut-off.
Benefits:
▸ Fast simple and contactless testing of the presence of
voltage.
▸ The automatic range selection function enables optimised
measured value read-off at all times.
▸ Measured values transferred straight to a PC through the
optical RS232 interface and USB cable.
■ Outstanding measuring accuracy and versatile applications:
DM-860A
▸ 5 5/6-digit display with a display range of 500,000.
▸ Temperature, frequency and capacity measurement.
▸ TRUE RMS effective value measurement.
Benefits:
▸ Extremely accurate when recording and displaying the measured
values.
▸ The broad spectrum in temperature measurements enables use
in air-conditioning systems, in laboratories or in industries.
▸ Quick fault diagnosis by measuring the true effective value.
▸
More on Page 632.
■ TRUE RMS: precise measurement,
even when consumption
fluctuates.
▸ TRUE RMS - true effective value measurement is a special
function of some GREENLEE multimeters. This function
enables correct consumption measurement with non-linear i.e. sinusoidal - consumption.
Benefits:
▸ True consumption measurements without errors through
sinusoidal consumers.
▸ More reliable planning and lower error quotas - caused for
example by incorrectly calculated current consumption.
▸ Devices with TRUE RMS: DM-510A, DM-810A, DM-820A
and DM-860A.
621
■ Robust and high capacity
for industrial use: DM-65.
▸ The most diverse applications.
▸ Large backlit display with bar chart.
Benefits:
▸ Suitable for applications to CAT IV, 600 V.
▸ The large illuminated display simplifies read-off
under all lighting conditions.
▸ More on Page 626.
■ Features of testers
True
effective
value
DC A
(A max.)
AC A
(A max.)
DM-25
622
ResistAutomatic and Contactless
Optical
Measuring
ance
manual range
voltage
interface
category
(M:)
selection
testing
DC V
(V max.)
AC V
(V max.)
600
600
2
III, 600 V
DM-45
10
10
600
600
40
III,
DM-65
10
10
1000
1000
60
III, 1000 V
IV, 600 V
DM-200A
8
8
1000
1000
60
IV, 300 V
III, 600 V
II, 1000 V
DM-210A
8
8
1000
1000
60
IV, 300 V
III, 600 V
II, 1000 V
600 V
DM-510
8
8
1000
1000
60
IV, 300 V
III, 600 V
II, 1000 V
DM-810A
10
10
1000
1000
50
IV, 1000 V
DM-820A
10
10
1000
1000
50
IV, 1000 V
DM-860A
10
10
1000
1000
50
IV, 1000 V
What you should know about
the nominal capacities of the
measuring categories
.
C AT
C AT
C AT
C AT
Protective values which greatly exceed the
nominal capacity of a system are stipulated
in the standards of the IEC categories.
Without this additional protection, transient
overvoltages which occur with increasing
regularity may cause serious or fatal injuries.
Domestic
connection
Electricity meter
Domestic
connection
Adjoining
building
Electricity
meter
Underground
supply cable
Domestic
connection
Adjoining building
Transformer
Electricity
meter
Underground supply cable
CAT I
Electronics
CAT II
Domestic appli• Electronic equip- ances, computers,
televisions
ment
• Equipment with
• Wall outlets and
low current usage long bypass flow
and surge voltage
circuits
limit protection
• All wall outlets
which are distant
more than 10 m
from a Category III
source
• All wall outlets
which are distant
more than 20 m
from a Category VI
source
CAT III
MC switch panel etc.
• Feeds and short bypass current
circuits
• Distributor panels
• Wall outlets for large devices
with “short” connections to the
domestic connection
CAT IV
Outdoor
transformers,
electricity
meters etc.
• Outdoor and domestic
connection
• Supply line from the
utility pole to the
building
• Overhead line to
the free-standing
building
• Underground line to
well pump
■ Measurement Category I
■ Measurement Category IV
is the signal level for telecommunications and electronic
equipment.
is the main electric supply level. Greenlee is setting new
standards by offering equipment that meets the highest
protective values of IEC standards and which are certified
accordingly. Can be used in all category ranges.
■ Measurement Category II
is the local level for permanently connected devices or
devices not operated by means of a fixed connection including all types of illumination from household devices
to office equipment such as copy machines. Can also be
used in Category I ranges.
■ Measurement Category III
is the distribution level for fixed main or bypass flow
circuits. These electric circuits are usually separated by
at least one level of transformer barrier of Category IV
(public utility or other high-voltage power source).
Can also be used in Category II and Category I ranges.
Greenlee equipment – tested and certified for compliance with norms by an independent party. This catalogue
states the category for many Greenlee devices, indicating
that these devices comply with the various IEC categories
(II, III or IV). All these references represent the categories
confirmed in tests by independent testing organisations –
giving you additional assurance.
The right type of protection for the task at hand.
No matter where you may need overvoltage protection –
select a device which has at least the nominal capacity
suitable for the work you are carrying out.
623
Testing and measuring instruments
Digital multimeter
DM Series in detail
Part No.
Catalog-no.
True RMS
52059476
52059477
52059478
52047801
52047802
52047803
DM-25
DM-45
DM-65
DM-200A
DM-210A
DM-510A
•
DC A (A max.)
10
10
8
8
8
Maximum resolution (μA)
0.1
0.1
0.1
0.1
0.1
0.5
Best accuracy (%)
1.0
1.0
0.5
0.8
AC A (A max.)
10
10
8
8
8
Maximum resolution (μA)
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
DC V (V max.)
Maximum resolution (μV)
Best accuracy (%)
AC V (V max.)
Maximum resolution (μV)
Best accuracy (%)
Resistance (MΩ)
1.8
1.8
1.0
1.0
1.0
600
600
1000
1000
1000
1000
10 mV
100
100
10
10
10
0.8
0.8
0.8
0.2
0.2
0.2
1000
600
600
1000
1000
1000
100 mV
1000
1000
10
10
10
1.2
0.8
0.8
1.0
1.0
1.0
2
40
60
60
60
60
Maximum resolution (mΩ)
100
100
100
100
100
100
Best accuracy (%)
0.5
1.0
1.0
1.0
0.5
0.5
Continuity and beeper
•
•
•
•
•
•
Diode test
•
•
•
•
•
•
200 uF
400 uF
•
•
•
•
•
•
•
40-400
40-400
40-500
40-500
40-500
•
•
Digital
Digital
Capacitance
Frequency measurement
Frequency response (Hz)
40-400
Temperature (T1)
Display type
Display of updating rate (x/s)
Coverage
Digital
Digital
•
•
Digital
Digital
2.5
3.0
3.0
5
5
5
2000
4000
6000
2500
2500
2500
•
24
24
24
40
40
40
USB. RS 232
USB. RS 232
Analogue bar chart
Updating rate analogue (x/s)
Computer Interface
Automatic and manual range selection
•
•
•
•
Automatic stop
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CAT III 600 V
CAT III 1000 V
CAT IV 600 V
CAT II 1000 V
CAT III 300 V
CAT IV 600 V
CAT II 1000 V
CAT III 300 V
CAT IV 600 V
CAT II 1000 V
CAT III 300 V
CAT IV 600 V
Non-contact voltage detection
Data Hold (measured data memory)
•
Minimum value / maximum value
Relative compensation function
Measurement category rating
CAT III 600 V
CE
•
•
•
•
•
•
Limited lifetime warranty
•
•
•
•
•
•
624
Testing and measuring instruments
Digital multimeter
52059476grp
DM-25 Digital multimeter 600 V AC/DC
Characteristics
▪ AC/DC voltage measurement
▪ Resistance measurement
▪ Audible continuity test
▪ Diode test
Technical data
Display
W
Digital
Voltage measurement
0.1 - 600 V
Resistance
0.1Ω - 2 MΩ
Measuring category
CAT III 600V
Item
DM-25 Digital multimeter 600 V AC/DC
Part No.
52059476
Scope of supply
Test leads
Part No.
Page
Battery 9 V
Protective cover
52059477grp
DM-45 Digital multimeter 600 V AC/DC with temperature measurement
Characteristics
▪ AC/DC voltage and current measurement
▪ Resistance measurement
▪ Audible continuity testing, diode test, temperature measurement
▪ Frequency and capacitance measurement
Technical data
Display
Digital
Capacitance
10 pF - 200 μF
Voltage measurement
1 mV - 600 V
Current measurement
0.10 μA - 10 A
Resistance
0.1 Ω - 40 MΩ
Frequency
1 Hz - 9.999 MHz
Measuring category
CAT III 600V
Temperature measurement
-20°C - 1000°C
Item
DM-45 Digital multimeter 600 V AC/DC
with temperature measurement
Part No.
52059477
Scope of supply
TSG-3 test leads
Part No.
50120344
W
Page
Temperature probe
Protective cover
Battery 9 V
625
Testing and measuring instruments
Digital multimeter
52059478grp
DM-65 Digital
W
multimeter 1000 V AC/DC with temperature measurement
Characteristics
▪ AC/DC voltage and current measurement
▪ Resistance measurement
▪ Audible continuity testing, diode test, temperature measurement
▪ Frequency and capacitance measurement
Technical data
Display
Digital with bar chart
Capacitance
10 pF - 400 μF
Voltage measurement
1 mV - 1000 V
Current measurement
0.1 μA - 10 A
Resistance
0.1 Ω - 60 MΩ
Frequency
1 Hz - 9.999 MHz
Measuring category
CAT III 1000 V, CAT IV 600 V
Temperature measurement
-20°C - 1000°C
Item
DM-65 Digital multimeter 1000 V AC/DC
Part No.
52059478
Scope of supply
TSG-3 test leads
Part No.
50120344
Temperature probe
Protective cover
Battery 9 V
626
Page
Testing and measuring instruments
Digital multimeter
grp_52047801grp
DM-200A / DM-210A Digital multimeter
Characteristics
▪ PC interface
▪ Automatic and manual range selection
▪ Large, backlit LC-display
▪ Automatic stop
▪ Analogue bar chart
▪ Optical and audible warning in the event of incorrect handling
Technical data
Item
DM-200A Digital multimeter
for temperature measurement
K-type, -4 ˚F - 572 ˚F
52047802
DM-210A Digital multimeter
for temperature measurement
-50 ˚C - 1000 ˚C
Voltage measurement
0.01mV - 1000V AC/DC
0.01mV - 1000V AC/DC
Current measurement
0.1μA - 8A AC/DC
0.1μA - 8A AC/DC
Resistance
0.1Ω - 60MΩ
0.1Ω - 60MΩ
Frequency
10Hz - 50KHz sine wave;
5Hz - 1MHz logic levelsquare
wave
10Hz - 50KHz sine wave;
5Hz - 1MHz logic levelsquare
wave
Measuring category
CAT II 1000V, CAT III 600,
CAT IV 300
CAT II 1000V, CAT III 600,
CAT IV 300
Capacitance
60nF - 3000μF
Frequency pickup
50Hz - 400Hz
Temperature measurement
-50°C - 1000°C
Item
DM-200A Digital multimeter for temperature measurement K-type,
-4 ˚F - 572 ˚F
Part No.
52047801
DM-210A Digital multimeter for temperature measurement
-50 ˚C - 1000 ˚C
52047802
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
Protective cover
Battery 2 x 1.5 V AAA
627
Testing and measuring instruments
Digital multimeter
52047803grp
DM-510A
Digital multimeter, True RMS
Characteristics
▪ Autocheck function permits the automatic selection of AC V / DC V or resistance with
low impedance for Ghost-Voltage-Removal
▪ PC interface
▪ Frequency, temperature and capacitance measurement
▪ Automatic and manual range selection
▪ Large, backlit LC-display
▪ Automatic stop
▪ Analogue bar chart
▪ Optical and audible warning in the event of incorrect handling
Technical data
Capacitance
60.00nF - 3000μF
Voltage measurement
0.01 mV - 1000 V AC/DC
Frequency pickup
50Hz - 400Hz
Current measurement
0.1μA - 8A AC/DC
Resistance
0.1Ω - 60MΩ
Frequency
5 Hz - 1 MHz
Measuring category
CAT III 600V; CAT II 1000V; CAT IV 300 V
Temperature measurement
-50°C - 1000°C
Item
DM-510A Digital multimeter, True RMS
Part No.
52047803
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
Accessories
TC-20 Nylon carrying case with carrying strap
for measuring instruments
Part No.
50075357
Page
633
DMSC-2U Interface kit, for downloading data
52047947
633
Temperature sensor, bright finish
Battery 2 x 1.5 V AAA
628
Testing and measuring instruments
Digital multimeter
DM-800 Series in detail
Part No.
52047805
52047806
Catalog-no.
True RMS
DM-810A
DM-820A
•
•
•
DC A (A max.)
10
10
10
Maximum resolution (μA)
0.1
0.1
0.01
Best accuracy (%)
0.2
0.2
0.1
AC A (A max.)
10
10
10
Maximum resolution (μA)
0.1
0.1
0.01
Best accuracy (%)
0.6
0.6
0.5
DC V (V max.)
1000
1000
1000
Maximum resolution (μV)
10
10
1
Best accuracy (%)
0.06
0.06
0.02
AC V (V max.)
1000
1000
1000
Maximum resolution (μV)
10
10
10
Best accuracy (%)
0.5
0.5
0.3
Resistance (MΩ)
60
60
50
Maximum resolution (mΩ)
100
100
10
Best accuracy (%)
0.1
0.1
0.07
Continuity and beeper
•
•
•
Diode test
•
•
•
Capacitance
•
•
•
Frequency measurement
•
•
•
Frequency response (Hz)
40-500
40-500
Temperature (T1)
50077970
DM-860A
20-100 k
•
Temperature (Dual T1, T2)
•
Display type
Digital
Digital
Display of updating rate (x/s)
5
5
Coverage
Digital
5
50.000 AC/500.000
Analogue bar chart
•
•
•
Updating rate analogue (x/s)
41
41
41 segments
Updating rate analogue (x/s)
60
60
60
Conductance 0.01 nS ~ 100 nS
•
•
•
Computer Interface
USB
USB
USB
Automatic and manual range selection
•
•
•
Automatic stop
yes
Peak hold
•
Data Hold (measured data memory)
•
•
Minimum value / maximum value
Relative compensation function
•
yes
•
•
Operating clearance
•
•
Safety category classification
CAT IV 1000 V
CAT IV 1000 V
CAT IV 600 V
CAT III 1000 V
CE
•
•
•
Limited lifetime warranty
•
•
•
629
Testing and measuring instruments
Digital multimeter
52047805grp
DM-810A
Digital multimeter, True RMS
Characteristics
▪ PC interface
▪ Automatic and manual range selection
▪ Large, backlit LC-display
▪ Automatic stop
▪ Analogue bar chart
▪ Optical and audible warning in the event of incorrect handling
Technical data
Capacitance
0,01 nF - 25 mF
Voltage measurement
0,01 mV - 1000 V AC/DC
Current measurement
0.1μA - 10A AC/DC
Resistance
0.1Ω - 60MΩ
Frequency
5 Hz - 1 MHz
Measuring category
CAT IV, 1,000V
Item
DM-810A Digital multimeter, True RMS
Part No.
52047805
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-20 Nylon carrying case with carrying strap for
measuring instruments
50075357
633
Accessories
DMSC-9U Interface kit, for downloading data
Part No.
52047948
Page
633
TSGF Measuring cable set with fuses (500 mA) CAT IV 1,000V
52034235
644
Battery 9 V
630
Testing and measuring instruments
Digital multimeter
52047806grp
DM-820A Digital multimeter, True RMS
Characteristics
▪ PC interface (DMSC-9U) USB cable and software for data logging via PC software
(accessories optional)
▪ Recording of peak value (5 ms peak hold) max, min and max/min results
▪ Automatic and manual range selection
▪ Large, backlit LC-display
▪ Automatic stop
▪ Analogue bar chart
▪ Optical and audible warning in the event of incorrect handling
Technical data
Capacitance
0,01 nF - 25 mF
Voltage measurement
0,01 mV - 1000 V AC/DC
Current measurement
0.1μA - 10A AC/DC
Resistance
0.1Ω - 60MΩ
Frequency
5 Hz - 1 MHz
Measuring category
CAT IV, 1,000V
Temperature measurement
-50°C - 1000°C
Item
DM-820A Digital multimeter, True RMS
Part No.
52047806
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-20 Nylon carrying case with carrying strap
for measuring instruments
50075357
633
Accessories
TSGF Measuring cable set with fuses (500 mA) CAT IV 1,000V
Part No.
52034235
Page
644
DMSC-9U Interface kit, for downloading data
52047948
633
Battery 9 V
Temperature sensor, bright finish
631
Testing and measuring instruments
Digital multimeter
50077970grp
DM-860A
Industrial digital multimeter, True RMS
Characteristics
▪ Recording of maximum, minimum and maximum/minimum results
▪ Recording of peak value (peak hold) max, min and max/min display
▪ 5 5/6-place display with a display range of 500,000 for greater precision
▪ Carrying out frequency, temperature and capacitance measurements as well as
diode tests and continuity checks
▪ Display of the relative measured value offset for checking the relative measured
value changes
▪ Automatic range selection
▪ Analogue 42-segment bar chart
▪ Large, backlit LC-display
▪ Temperature measurements up to 1000 °C
Technical data
Capacitance
50.00; 500.0nF; 5.000, 50.00, 500.0μF, 5000, 25.00mF
Voltage measurement
500 mV - 1000 V
Current measurement
500.00, 5000.0μA; 50.000, 500.00mA; 5.0000, 10.000A
Resistance
500.00Ω; 5.0000, 50.000, 500.00kΩ; 5.0000, 50.000MΩ
Frequency
5 Hz - 200 kHz sinus wave; 5 Hz - 2 MHz square wave logic
level
Measuring category
CAT IV 1000V
Temperature measurement
K-type, -50 °C to 1,000°C (-58°F - 1832°F)
Item
DM-860A Industrial digital multimeter, True RMS
Part No.
50077970
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-20 Nylon carrying case with carrying strap for measuring
instruments
50075357
633
Accessories
DMSC-9U Interface kit, for downloading data
Part No.
52047948
Page
633
TSGF Measuring cable set with fuses (500 mA) CAT IV 1,000V
52034235
644
Battery 9 V
Temperature sensor, bright finish
632
Testing and measuring instruments
Digital multimeter
52047947grp
DMSC-2U Interface kit, for downloading data (DM-200A, DM-210A, DM-510A)
Characteristics
▪ For connecting to a serial PC port for saving the data recorded by digital multimeters
▪ For recording and graphically representing data in real time
▪ For exporting data for analysis with every type of table calculation program
Technical data
Connection
Free series COM connector with 9-pin plug/USB.
Monitor
Minimum resolution 640 x 480, 800 x 600 recommended
Fixes disc
Minimum 20 megabyte free memory
Hardware requirements
Processor and working memory must correspond at least to
the requirements of Windows
Software requirements
Windows ME/98/95 or Windows XP/2000/NT4/Vista
Item
DMSC-2U Interface kit, for downloading data
52047948grp
Part No.
52047947
DMSC-9U Interface kit, for downloading data (DM-810A / DM-820A / DM-860)
Characteristics
▪ For connecting to a serial PC port for saving the data recorded by digital multimeters
▪ For recording and graphically representing data in real time
▪ For exporting data for analysis with every type of table calculation program
Technical data
Connection
Free series COM connector with 9-pin plug/USB
Monitor
Minimum resolution 640 x 480, 800 x 600 recommended
Fixes disc
Minimum 20 megabyte free memory
Hardware requirements
Processor and working memory must correspond at least to
the requirements of Windows
Software requirements
Windows ME/98/95 or Windows XP/2000/NT4/Vista
Item
DMSC-9U Interface kit, for downloading data
50075357grp
Part No.
52047948
TC-20 Nylon carrying case with carrying strap for measuring instruments
Characteristics
▪ With inner pocket for test leads
Suitable for
▪ Series 200, Series 500 and Series 800 measuring instruments
Item
TC-20 Nylon carrying case with carrying strap for measuring
instruments
Part No.
50075357
633
Take the current
to the meter.
Clamp meters for
DC and AC.
Our clamp meters are set apart by their versatile functions.
The displays allow measured values to be read quickly,
even under difficult conditions.
Most devices conform to IEC CAT IV and are able
to safely measure currents up to 1,000 A.
If handled correctly, we offer a lifetime
limited warranty on these products.
◾ For DC and AC.
◾ For DC and AC voltage.
◾ With digital and analogue display.
◾ For measuring categories III and IV.
◾ With true effective value measurement.
634
Clamp meters
available
for diverse
applications
and conductor
diameters.
■ Also suitable for DC: CM-950
▸ Instrument for measuring direct and alternating voltage
and direct and alternating current.
▸ With double hall sensor for optimised accuracy
with direct current measurements.
▸ With residual compensation during direct current
measurements.
Benefits:
▸ Just one measuring device for both DC and AC.
▸ Highly accurate measurements.
▸ Measuring errors are practically impossible.
■ Analogue bar display for fast indication: CM-1300
▸ Also with analogue display.
▸ With acoustic continuity test.
Benefits:
▸ Variances are indicated immediately as the analogue bar display responds
faster than conventional digital displays.
▸ Fast testing of contact faults with the acoustic continuity function.
■ Measures direct and alternating current to 1000 A: CM-1550
▸ Approved for measuring categories CAT III and CAT IV.
▸ For DC and AC.
▸ For true effective value measurement even with distorted current flows.
Benefits:
▸ Current measurements in all application ranges up to 1000 A.
▸ Safe and accurate voltage and current measurement thanks to true RMS
effective value measurement.
■ Features of clamp meters.
True effective value
DC A
(A max.)
AC A
(A max.)
DC V
(V max.)
AC V
(V max.)
Resistance (:)
Frequency
Hz
Bar
display
2000
2000
400
400
400
400
CM-330
400
CM-410
CM-600
CM-800
CM-850
CM-900
CM-950
400
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
1000
1000
750
400
1000
1000
750
400
1000
1000
750
400
1000
1000
750
400
600
600
CM-1300
CM-1350
CM-1500
CM-1550
1000
Measuring
category
III, 600 V
III, 600 V
III, 600 V
III, 600 V
III, 600 V
III, 600 V
III, 600 V
IV, 600 V
III, 1000 V
IV, 600 V
III, 1000 V
IV, 600 V
III, 1000 V
IV, 600 V
III, 1000 V
635
Testing and measuring instruments
Clamp meters
50077350grp
CMT-80 Clamp-on
multimeter
Characteristics
▪ Jaw size 27 mm
▪ Trouble-free, automatic measurement of current strength, voltage and resistance
▪ Compact design for measuring in tight spaces
▪ Low impedance rules out measurement of stray voltage from
▪ 400 A AC~, 600 V AC/DC measurements
▪ Data Hold function for recording important measurement results
▪ Longer battery service life due to automatic shut-off
Technical data
Display
LCD (6000 display range)
Voltage measurement
AC V: 1.3, 600.0; DC V: 2.1 - 600.0; 0.7 - 600.0V
Current measurement
0.9-400.0A AC
Resistance
2 KΩ with beeper for continuity check
Measuring category
CAT III, 600V
Jaw size
27 mm
Item
CMT-80 Clamp-on multimeter
Part No.
50077350
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-5 Nylon carrying case for measuring instruments with belt loop
50075888
645
Battery 9 V
636
Testing and measuring instruments
Clamp meters
CM Series in detail
Part No.
Catalog-no.
True RMS
50118650
52022030
52066379
52066378
52066376
52066374
52066372
52020887
CM-330
CM-410
CM-660
•
CM-860
•
CM-960
•
CM-1360
•
CM-1560
•
CSJ-100
•
•
•
•
AmpTip™
•
DC A (A max.)
600
1000
Maximum resolution (μA)
0.1
0.1
Best accuracy (%)
1.2
1.2
AC A (A max.)
400
400
600
600
600
1000
1000
Maximum resolution (μA)
0.01
0.1
0.1
0.1
0.1
0.1
0.1
200
0.1
Best accuracy (%)
2.0
1.9
1.9
1.9
1.9
1.9
1.9
3.0
DC V (V max.)
600
600
600
1000
1000
1000
Maximum resolution (μV)
0.1
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
1.0
0.7
0.7
0.7
0.7
1.0
AC V (V max.)
600
600
600
600
750
750
1000
Maximum resolution (μV)
0.1
1
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
1.0
1.2
1.0
1.0
1.0
1.0
1.5
Resistance (MΩ)
20MΩ
20MΩ
2000Ω
400Ω
400Ω
400Ω
400Ω
Maximum resolution (mΩ)
0.1
1
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
0.7
1.5
1.0
1.0
1.0
1.0
1.0
•
•
•
•
•
•
•
•
•
•
•
Continuity and beeper
Frequency measurement
Frequency threshold value (Hz)
50-60
50-500
40-500
50-400
50-500
50-400
50-500
50-500
Jaw size
30mm
27mm
35mm
34mm
35mm
51mm
51mm
16mm
Display type
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
25
1.5
4
2.5
2.5
2.5
2.5
1.5
2000
2000
2000
4000
4000
4000
4000
2000
42 segments
42 segments
42 segments
42 segments
13
13
13
13
•
•
•
•
•
•
•
•
•
•
yes
yes
yes
yes
yes
•
•
•
•
Display of updating rate (x/s)
Count
Analogue bar chart
Updating rate analogue (x/s)
Low battery indicator
•
Automatic and manual range selection
•
•
•
Automatic stop
yes
Peak Hold
Data Hold (measured data memory)
•
•
•
Minimum value / maximum value
Safety category classification
•
•
•
•
yes
yes
yes
yes
•
CAT IV 600 V CAT IV 600 V CAT IV 600 V
CAT III 1000 V CAT III 1000 V CAT III 1000 V
CAT III 600 V
CAT III 600 V
CAT III 600 V
CAT III 600 V
CAT III 600 V
CE
•
•
•
•
•
•
•
•
Limited lifetime warranty
•
•
•
•
•
•
•
•
637
Testing and measuring instruments
Clamp meters
50118650grp
CM-330 Clamp-on
multimeter
Characteristics
▪ Jaw size 30 mm
▪ Compact, ergonomic design for measuring in tight spaces
▪ Measurement of alternating currents to 400 A
▪ Max Hold function for recording peak values
▪ Data Hold function for recording important measurement results
Technical data
Display
LCD
Current measurement
0,01 A - 400 A AC
Measuring category
CAT III, 600V
Jaw size
30 mm
Item
CM-330 Clamp-on multimeter
Part No.
50118650
Scope of supply
TC-5 Nylon carrying case for measuring instruments with belt loop
Part No.
50075888
Page
645
Battery 9 V
52022030grpClamp-on multimeter
CM-410
Characteristics
▪ Jaw size 27 mm
▪ Narrow, compact design for measuring in tight spaces
▪ Measurement of resistances up to 20 MΩ
▪ Data Hold function for recording important measurement results
▪ Automatic device switch-off
▪ Continuity test
Technical data
Display
LCD
Continuity test
Yes
Voltage measurement
200.0 - 600V AC/DC
Current measurement
200.0 - 400 A AC
Resistance
200.0Ω, 2.000, 20.00, 200.0kΩ, 2.000, 20.000MΩ
Measuring category
CAT III, 600V
Jaw size
27 mm
Item
CM-410 Clamp-on multimeter
Part No.
52022030
Scope of supply
TC-5 Nylon carrying case for measuring instruments with belt loop
Part No.
50075888
Battery 2 x 1.5 V AAA
638
Page
645
Testing and measuring instruments
Clamp meters
50075934grp
CM-660 Clamp-on multimeter, True RMS
Characteristics
▪ Jaw size 30 mm
▪ AmpTip™ provides increased accuracy on small wires carrying 60 amps or less
▪ Variable Frequency Drive ACV, Hz Measurements
▪ Measurement of alternating voltage and alternating current
▪ Resistance measurement up to 60 kΩ
▪ Non-contact AC voltage detection
▪ Longer battery service life due to automatic shut-off
Technical data
Display
LCD
Voltage measurement
0 V - 600 V AC/DC
Current measurement
600 A AC
Resistance
60kΩ
Measuring category
CAT III, 600V
Jaw size
30 mm
Item
CM-660 Clamp-on multimeter, True RMS
Part No.
52066379
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-10 Nylon carrying case for measuring instruments with belt loop
50075349
645
W
Battery 9 V
639
Testing and measuring instruments
Clamp meters
grp_50076647grp
CM-860 Clamp-on
W
multimeter, True RMS
Characteristics
▪ Jaw size 30 mm
▪ True RMS actual effective value for the most precise measurements
▪ AmpTip™ provides increased accuracy on small wires carrying 60 amps or less
▪ Variable Frequency Drive ACV, Hz Measurements
▪ Measurement of alternating current, direct and alternating voltage, frequency and
resistance
▪ Easy-to-read backlit display for poor lighting conditions
▪ Peak Hold and Data Hold function for recording measurement results
▪ Non-contact AC voltage detection
▪ MIN/MAX function for more versatile applications
▪ Analogue bar chart for checking fast changes
▪ Longer battery service life due to selectable automatic shut-off
Technical data
Display
LCD
Voltage measurement
0 - 600 V AC/DC
Current measurement
0 - 600 A AC
Resistance
60kΩ
Frequency
0,02 - 400 Hz
Measuring category
CAT III 600V
Jaw size
30 mm
Item
CM-860 Clamp-on multimeter, True RMS
Part No.
52066378
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-10 Nylon carrying case for measuring instruments with belt loop
50075349
645
Battery
640
Testing and measuring instruments
Clamp meters
grp_50076990grp
CM-960 Clamp-on multimeter, True RMS
Characteristics
▪ Jaw size 35 mm
▪ True RMS actual effective value for the most precise measurements
▪ AmpTip™ provides increased accuracy on small wires carrying 60 amps or less
▪ Variable Frequency Drive ACV, Hz Measurements
▪ Measurement of direct and alternating current, direct and alternating voltage,
frequency, resistance and capacitance
▪ Non-contact AC voltage detection
▪ Dual reverberation sensor ensures precision during direct current measurement
▪ Non-Contact AC voltage detection
▪ Easy-to-read backlit display for poor lighting conditions
▪ Peak Hold and Data Hold function for recording measurement results
▪ Diode test
▪ MIN/MAX function for more versatile applications
▪ Analogue bar chart for checking fast changes
▪ Automatic zero-point setting for direct current measurement
▪ Longer battery service life due to selectable automatic shut-off
Technical data
Display
LCD
Voltage measurement
0 - 600 V AC/DC
Current measurement
0 - 600 A AC/DC
Resistance
60kΩ
Frequency
0,02 - 400 Hz
Measuring category
CAT III 600V
Jaw size
35 mm
Item
CM-960 Clamp-on multimeter, True RMS
Part No.
52066376
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-10 Nylon carrying case for measuring instruments with belt loop
50075349
645
W
Battery 9 V
641
Testing and measuring instruments
Clamp meters
grp_50077325grp
CM-1360 Clamp-on
W
multimeter, True RMS
Characteristics
▪ Jaw size 51 mm
▪ True RMS actual effective value for the most precise measurements
▪ AmpTip™ provides increased accuracy on small wires carrying 60 amps or less.
▪ Variable Frequency Drive ACV, Hz Measurements
▪ Measurement of alternating current, direct and alternating voltage, frequency,
resistance, capacitance and Diode test
▪ Flashlight aids in positioning when working in dark areas
▪ Easy-to-read backlit display for poor lighting conditions
▪ Peak Hold and Data Hold function for recording measurement results
▪ MIN/MAX function for more versatile applications
▪ Analogue bar chart for checking fast changes
▪ Audible continuity check
▪ Longer battery service life due to selectable automatic shut-off
Technical data
Display
LCD
Voltage measurement
1000V AC / DC
Current measurement
1000 A AC
Resistance
60kΩ
Frequency
0.02 - 400 Hz
Measuring category
CAT IV 600V, CAT III 1000V
Jaw size
51 mm
Item
CM-1360 Clamp-on multimeter, True RMS
Part No.
52066374
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-30 Nylon carrying case for measuring instruments with belt loop
50075365
645
Battery 9 V
642
Testing and measuring instruments
Clamp meters
grp_50077988grp
CM-1560 Clamp-on multimeter, True RMS
Characteristics
▪ Jaw size 51 mm
▪ True RMS actual effective value for the most precise measurements
▪ AmpTip™ provides increased accuracy on small wires carrying 60 amps or less
▪ Variable Frequency Drive ACV, Hz Measurements
▪ Measurement of direct and alternating current, direct and alternating voltage,
frequency and resistance
▪ Flashlight aids in positioning when working in dark areas
▪ Crest (Peak) Max / Min
▪ Dual reverberation sensor ensures precision during direct current measurement
▪ Easy-to-read backlit display for poor lighting conditions
▪ Peak Hold and Data Hold function for recording measurement results
▪ MIN/MAX function for more versatile applications
▪ Analogue bar chart for checking fast changes
▪ Audible continuity check
Technical data
Display
LCD
Voltage measurement
1000 V AC / DC
Current measurement
0 - 1000 A AC/DC
Resistance
60kΩ
Frequency
0,02 - 400 Hz
Measuring category
CAT III 1000V, CAT IV 600V
Jaw size
51 mm
Item
CM-1560 Clamp-on multimeter, True RMS AC/DC
Part No.
52066372
Scope of supply
TSG-3 test leads
Part No.
50120344
Page
TC-30 Nylon carrying case for measuring instruments with belt loop
50075365
645
W
Battery 9 V
643
Testing and measuring instruments
Clamp meters
52020887grp
CSJ-100
Jaw meter, open
Characteristics
▪ Jaw size 16 mm
▪ For easy, quick voltage measurement of AC, DC and alternating voltage
▪ Resistance measurement up to 20 MΩ
▪ Audible continuity test and diode test
▪ Alarm and LED for contactless voltage detection
▪ Automatic shut-off for longer service life
▪ Data Hold for recording the measured values
Technical data
Display
LCD
Voltage measurement
200.0, 1,000V
Current measurement
0 A - 200 A AC
Resistance
200.0Ω; 2.000, 20.00, 200.0kΩ; 2.000, 20.00MΩ
Frequency
50 - 500 Hz
Measuring category
CAT III 1000V, CAT IV 600V
Jaw size
16 mm
Item
CSJ-100 Jaw meter, open
Part No.
52020887
Scope of supply
TC-5 Nylon carrying case for measuring instruments with belt loop
Part No.
50075888
Battery 2 x 1.5 V AAA
Test leads
52034235grp
TSGF Measuring
cable set with fuses CAT IV 1,000V
Characteristics
▪ Suitable for Greenlee jaw meters and digital multimeter
▪ Double insulated Silicon conductors with two coatings
▪ Superfine stranded copper cable, highly flexible
▪ 1.2 m cable length
▪ Fuses 6.3 x 32 mm FF 500 mA
Item
TSGF Measuring cable set with fuses (500 mA) CAT IV 1,000V
644
Part No.
52034235
Page
645
Testing and measuring instruments
Clamp meters
50075888grp
TC-5 Nylon carrying case for measuring instruments with belt loop
Suitable for
▪ CMT-80 / CM-330 / CM-410 / CSJ-100
Item
TC-5 Nylon carrying case for measuring instruments with belt loop
50075349grp
Part No.
50075888
TC-10 Nylon carrying case for measuring instruments with belt loop
Suitable for
▪ CM-600 / CM-800 / CM-850 / CM-900 / CM-950
Item
TC-10 Nylon carrying case for measuring instruments with belt loop
Part No.
50075349
TC-30 Nylon carrying case for measuring instruments with belt loop
Suitable for
▪ CM-1300 / CM-1350 / CM-1500 / CM-1550
▪ Voltage tester GT-55NE / GT-85NE
Item
TC-30 Nylon carrying case for measuring instruments with belt loop
Part No.
50075365
645
The right test
for every installation.
VDE tester to VDE 0100.
All you need to do to satisfy the requirements of VDE 0100 is
respect a broad range of values. The Greenlee ETest series
ensures you meet all these requirements. No matter whether
with the multifunctional installation tester or the special tools
for earthing and insulation resistances. To the highest possible
level of safety and simple operation.
The ETest series is extremely safe to use as
the display is always within view.
◾ VDE tester to VDE 0100.
◾ Continuity test.
◾ Voltage measurements.
◾ Insulation resistance tests.
◾ RCD/FI measurements.
◾ Earthing resistance measurements.
646
■ All measurements in just
one action: ETest Multi
▸ One measuring device for measuring earth continuity and
insulation from 100 V – 500 V loop impedance, frequency and
voltage.
▸ Handy design weighing just 900 g.
▸ With unique integrated measuring head and cordless probe.
Benefits:
▸ Being multifunctional, the ETest Multi is several tools in one.
▸ The simple operation increases both comfort and safety when
in use.
▸ The cordless probe enables use even at relatively inaccessible
measuring points.
■ Measures the earthing resistance at every voltage: ETest RE
▸ Suitable for use at 110 Volt, 230 Volt and electrical
3-phase systems.
▸ Earth resistance measurement according to 2, 3 and
4-wire method.
▸ With flexible USB interface and storage capacity for
500 test results.
Benefits:
▸ The ETest RE can be used at all standard voltages.
▸ Regardless of the applicable requirements, earth
resistance can be measured according to any
method.
▸ The test results can be quickly and easily archived
on the PC.
647
Testing and measuring instruments
VDE testing instruments
52045014grp
ETest Multi,
multi-functional installation tester
Characteristics
▪ DIN VDE 0100 tester for: Continuity test, voltage measurement, insulation resistance
test, line and earth loop impedance measurement, automatic RCD/RCCB test
sequence, test of RCD/RCCB response time, test of RCD/RCCB trip current
▪ Uniquely integrated measuring head (wireless probe)
▪ Loop impedance measurement optionally without triggering the RCCB
▪ Slim tester with the lightest weight of its class
▪ Auto test function for RCD/RCCB measurement
▪ Large LC display and analogue bar display
▪ Extremely easy to use
▪ More safety when working under voltage - display is located directly in field of vision
during use
▪ Fast and precise cutting
Technical data
Earth continuity check
Test current at
> 200 mA
Scale range of the display
0.00 Ω - 199 Ω
Resolution (Earthing)
0,01 Ω maximum
Insulation resistance
Test voltage
100 V, 250 V, 500 V
Test current
1 mA> 1 mA with UN x (1000W/V)
Short circuit-Test current
> 2 mA
Scale range of the display
(Isolation)
0.05 MΩ - 199 MΩ
Resolution (Isolation)
0,01 MΩ maximum
RCD
Mains voltage
195 - 253 V / 195 - 440 V, 40 Hz - 65 Hz V
Nominal Test current
15 mA
Scale range of the display
(Impedance):
0.01 Ω - 2000 Ω
Resolution (Impedance)
0,01 Ω maximum
Scale range
0 - 26 kA
RCD
Mains voltage RDC
195 - 253 V, 40 Hz - 65 Hz
Nominal Test current RDC
10 mA, 30 mA, 100 mA, 300 mA, 500 mA
Scale range of the increase in
current:
½ lΔn up to 1.1 lΔn
Measurement of voltage /
frequency
Display scale range
0 V - 400 V
Resolution (Voltage/Freq)
1V
Accuracy
± 5 % ± 2 Digits
Frequency range
45 Hz - 65 Hz
General information
Safety guidelines
IEC61010-1 300V Cat III, EN 61557
Dimension
260 x 100 x 55 mm mm
Weight
0,950 kg
Power supply system
Battery - AA 1.5 V alkali, IEC-LR14 (6 incl. in scope of supply)
Item
ETest Multi, multi-functional installation tester
648
Part No.
52045014
Testing and measuring instruments
VDE testing instruments
Scope of supply
Test lead set
Part No.
52046756
Power lead
52046757
Wireless measuring probe
52046758
Robust plastic case
52046759
52045013grp
Page
ETest RE, earth resistance measuring device
Characteristics
▪ Test options: Earth resistance measurement with 2, 3 and 4 - Wire Method,
Earth resistance measurement with jaw meter, measurement of the specific earth
resistance
▪ USB interface
▪ Large LC display
▪ Compact design
▪ Comfortable operation by rotary switch and push buttons
▪ Memory for 500 test results
▪ Simple downloading options to PC via USB
Technical data
Earth continuity check
Scale range of the display
0,00 Ω - 50,0 kΩ
General information
Safety guidelines
IEC 61010-1 300 V CAT II, EN 61557
Dimension
260 x 100 x 55 mm mm
Weight
0,800 kg
Power supply system
Battery - AA 1.5 V alkali, IEC-LR14 (6 incl. in scope of supply)
Measured frequency
125 Hz ± 1 Hz
Measured frequency earth
resistance
125 Hz ± 1 Hz
Measured frequency clamp
method
125 Hz ± 1 Hz
Measured voltage earth
resistance
< 30 V effective sinusoidal
Measured voltage jaw method
< 30 V effective sinusoidal
Measuring current jaw method
< 20 mA effective
Measuring current earth
resistance
< 20 mA effective
Measuring voltage
< 30 V effective sinusoidal
Measurement current
< 20 mA effective
Interface
USB
scale range
jaw method
0,00 Ω - 2.0 kΩ
Storage spaces
500
Item
ETest RE, earth resistance measuring device
Part No.
52045013
Scope of supply
Test lead set
Part No.
52046753
Connecting cable USB to MINI DIN
52046754
Page
Ground spike (4)
Carrying bag
52046755
Accessories
Current probe
Part No.
52046834
Page
649
Measuring heat
where nobody goes.
Temperature measuring devices
for tight areas.
Temperature measuring devices can measure temperatures
quickly and safely from a distance. The products are set apart
by extreme precision. The compact device design also permits
measurements in tight areas.
If handled correctly, we offer a lifetime
limited warranty on these products.
High optical resolution for sharp measurement.
◾ For measurements from -60 °C to +625 °C.
◾ Accuracy to ± 2 °C.
◾ With laser for locating target area.
◾ With adjustable emissivity.
650
■ For highly-precise temperature measurement: TG-2000.
▸ Highly-precise temperature measurements from
a distance and in tight areas.
▸ Precise focussing on measuring points even
from long distances.
▸ Connection port for type K temperature sensors.
Benefits:
▸ Injuries and short circuits eliminated due to the
distance during measurement.
▸ Temperature measurements can easily be taken
even while the machine is operating.
■ Temperature
measurement for
constrained areas and from
a safe distance.
0.2 m
0.1 m
▸ Adjustable emissivity for optimising
measuring accuracy for numerous
materials and surfaces.
Benefits:
▸ With an optical resolution of 12:1,
you can measure accurate to 20 cm
from a distance of 2.4 m.
1.20 m
2.40 m
▸ Under-ceiling measurements,
for example, can easily be taken
without a ladder.
Optical resolution 12:1 and associated measuring ranges.
■ The TG-1000 and TG-2000 in numbers.
Optical
resolution
Temperature
measurement
range
Accuracy
Laser
TG-1000
12:1
-60 °C - 550 °C
(-76 °F - 1022 °F)
±2% or
±2 °C (4°F)
single
TG-2000
16:1
-60 °C - 625 °C
(-76 °F - 1157 °F)
±2% or
±2 °C (4°F)
dual
Type K sensors
Yes
651
Testing and measuring instruments
Temperature gauges
52059365grp
TG-1000
Infra-red thermometer
Characteristics
▪ Safe, non-contact temperature measurement
▪ Display with background illumination for comfortable read-off in all work areas
▪ Temperature display selectable in Celsius (°C) or Fahrenheit (°F)
▪ Maximum/minimum temperature, difference and average measurements
▪ Laser pilot light for identification of the centre of the target measuring area
W
Suitable for
▪ A variety of materials through adjustable emissivity for optimising the measuring
accuracy
Technical data
Monitor
LCD
Optical resolution
12:1
Temperature measurement
-60 °C - 550 °C
Item
TG-1000 Infra-red thermometer
52059364grp
TG-2000
Part No.
52059365
Dual laser infra-red thermometer
W
Characteristics
▪ Safe, non-contact temperature measurement
▪ Display with background illumination for comfortable read-off in all work areas
▪ Temperature display selectable in Celsius (°C) or Fahrenheit (°F)
▪ Maximum/minimum temperature, difference and average measurements
▪ Twin laser for identification of the approximate diameters of the target measuring
area
▪ Bush for type K thermoelement
Suitable for
▪ A variety of materials through adjustable emissivity for optimising the measuring
accuracy
Technical data
Monitor
LCD
Optical resolution
16:1
Temperature measurement
-60 °C - 625 °C
Item
TG-2000 Dual laser infra-red thermometer
50075926grp
TPB Temperature
Part No.
52059364
probe for temperatures of -40° C to +204° C
Suitable for
▪ Surfaces, air and gases.
▪ Not for use with fluids and gels.
Technical data
Sensor length
1 m ±5 mm (39.4“ ±0.2“)
Temperature measurement
-40°C to +204°C (-40.00°C to 203.89°C)
Thermoelement
Thermoelement type K
Item
TPB Temperature probe for temperatures of -40° C to +204° C
652
Part No.
50075926
Testing and measuring instruments
Temperature gauges
50065696grp
TPI-1 Temperature probe for temperatures of -40° C to +800° C
Suitable for
▪ Use in liquids and gels.
Technical data
Accuracy
0.75% or ±2.2°C (4°F)
Sensor length
120 mm ±5 mm (4.72“ ±0.2“)
Temperature measurement
-40°C to 800°C (-40°F to 775.00°C)
Thermoelement
Thermoelement type K
Item
TPI-1 Temperature probe for temperatures of -40° C to +800° C
50065700grp
Part No.
50065696
TPFSC Temperature probe for temperatures of -40° C to +500° C
Suitable for
▪ Measurement of flat or bevelled surfaces
Technical data
Accuracy
0.75% or ±2.2°C (4°F)
Sensor length
120 mm ±5 mm (4.72“ ±0.2“)
Temperature measurement
-40°C to +500°C (-40°F to 932°F)
Thermoelement
Thermoelement type K
Item
TPFSC Temperature probe for temperatures of -40° C to +500° C
Part No.
50065700
653
Cables
on course.
Sound testing sensors for
sheathed and unsheathed cables.
Sound testing sensors for cable and conductor identification
allow cables to be detected within a bundle at a cross-connect
point or at the remote end.
▸ In some cases using various tones for several conductors at
the same time.
▸ Also without metallic contact with the receiver.
The devices enable cables and conductors to be quickly traced
along a wall in full control panels and equipment rooms.
Simply connect the transmitter and cables
can be quickly detected.
◾ Sound testing sensors for twisted pair,
coaxial and contactless cables.
◾ For continuity tests and tracking cores
and cables.
◾ Various sensitivities can be set for
precise identification.
654
Testing and measuring instruments
Cable and conductor identifiers
52047869grp
Acoustic testing sensor kit 701K-G
Characteristics
▪ For the identification of individual conductors or cables
▪ Talk battery supply
▪ Tone generator with crocodile terminals and RJ-11 plug
▪ 3-colour LED display (identifies WS call voltages)
▪ Weather-resistant design
▪ Tone generator with interchangeable tips
▪ Selectable wobble tone
▪ Polarity test
▪ Continuity test
Item
Acoustic testing sensor kit 701K-G
Part No.
52047869
Scope of supply
High-power sound generator 77HPCE
Part No.
52055781
Inductive amplifier 200 EP
52055782
Bag
50086839
Page
Battery 9 V
50604660grp
Premium Tone and Probe Kit 801K
Characteristics
▪ Talk battery supply
▪ Tone generator with crocodile terminals with pincushion and RJ-11 plug
▪ 3-colour LED display (identifies WS call voltage).
▪ Weather-resistant design
▪ Selectable wobble tone
▪ Continuity test
▪ Polarity test
▪ 50Hz filter function
Item
Premium Tone and Probe Kit 801K
Part No.
50604660
Scope of supply
77HP/6A Tone generator
Part No.
50605034
200FP filter sensor
50604678
Bag 700C
50086839
Page
Battery 9 V
655
Secure communication
in the network.
Network measuring devices
and testers.
Fast, precise and easy to use - these features make Greenlee's
wiring and network service testers indispensable for technicians
who install and maintain networks. The NETcat® Micro NC-100
is a wiring tester for testing data voice and video applications.
The result is clearly shown on a backlit LCD display.
In twisted-pair mode, even “split-pairs” faults can be found.
An integrated sound generator combined with an inductive
receiver enables laid cables to be quickly identified. The NETcat®
Pro NC-500 also offers the option of TDR calibration - enabling
you to determine the length of the cable without a problem.
Greenlee measuring devices and testers for the fast and simple testing of networks.
◾ Network cable tester.
◾ Built-in tone generator.
◾ Length measurement via TDR function.
◾ Backlit touchscreen display.
656
Testing and measuring instruments
Network, measuring devices and testers
52024541grp NETcat®
Micro NC-100 is a wiring tester for testing data, voice and video cables
Characteristics
▪ Built-in tone generator
▪ Testing of twisted pair (UTP, STP) and coaxial cables
▪ Locating short-circuits, breaks, incorrect wiring and split pair errors
▪ Surge warning feature
▪ Digital, backlit display
▪ Telephone (RJ-12), LAN (RJ-45) and coaxial connector (F type) ports
▪ Integrated remote unit
▪ Three selectable sound signals for cable identification
Item
NETcat® Micro NC-100
Part No.
52024541
Scope of supply
Twisted pair, coax and crocodile clips/connecting cable
Part No.
Page
Battery 9 V
NC100EPgrp
NETcat® Micro NC-100 in combination with inductive receiver 200EP
for cable identification
Characteristics
▪ Telephone (RJ-12), LAN (RJ-45) and coaxial connector (F type) ports
▪ Integrated remote unit
▪ Three selectable tone signals for cable conductor identification
▪ Testing of twisted pair (UTP, STP) and coaxial cables
▪ Locating short-circuits, breaks, incorrect wiring and split pair errors
Item
NETcat® Micro NC-100 + 200EP
Part No.
NC100EP
Scope of supply
NETcat® Micro NC-100
Part No.
52024541
Inductive amplifier 200 EP
52055782
Page
657
Carrying bag
Battery 9 V
657
Testing and measuring instruments
Network, measuring devices and testers
52024556grp
NETcat® Pro
NC-500, wiring and network service tester with TDR function
Characteristics
▪ Length measurement using TDR function up to 600 m
▪ Four selectable tone signals for cable identification
▪ Displays active network devices (PC or hub) in 10/100 Base-T networks
▪ NVP calibration
▪ ID detection of up to eight remote units with optional NC-510 accessory kit
▪ Testing of twisted pair (UTP, STP) and coaxial cables
▪ Locating short-circuits, breaks, incorrect wiring and split pair errors
Item
NETcat® Pro NC-500
Scope of supply
Twisted pair, coax and crocodile clips/connecting cable
Part No.
52024556
Part No.
Page
Part No.
52024661
Page
Battery 9 V
Accessories
7 Remote units ID2 - ID8, carrying bag incl.
658
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement