Biostar TH67B motherboard

Biostar TH67B motherboard
TH67+/TH67/TH67 B Setu p Ma nua l
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5
1.6
Before You Start......................................................................................... 1
Package Checklist ..................................................................................... 1
Motherboard Features.............................................................................. 2
Rear Panel Connectors.............................................................................. 3
Motherboard Layout (TH67+ / TH67)..................................................... 4
Motherboard Layout (TH67B)................................................................. 5
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ............................................... 6
FAN Headers.............................................................................................. 8
Installing System Memory ........................................................................ 9
Connectors and Slots................................................................................ 11
3.1
3.2
How to Setup Jumpers............................................................................. 14
Detail Settings .......................................................................................... 14
4.1
4.2
4.3
Operating System.................................................................................... 19
Raid Arrays............................................................................................... 19
How RAID Works..................................................................................... 19
5.1
5.2
T-Series UEFI BIOS ................................................................................... 23
T-Series Software...................................................................................... 26
6.1
6.2
6.3
Driver Installation Note.......................................................................... 36
Extra Information.................................................................................... 37
Troubleshooting ....................................................................................... 38
Chapter 2: Hardware Installation .......................... 6
Chapter 3: Headers & Jumpers Setup .................. 14
Chapter 4: RAID Functions .................................. 19
Chapter 5: T-Series BIOS & Software................... 23
Chapter 6: Useful Help ........................................ 36
Appendix: SPEC In Other Languages ................... 40
German.................................................................................................................. 40
French .................................................................................................................... 42
Italian..................................................................................................................... 44
Spanish ................................................................................................................... 46
Portuguese ............................................................................................................ 48
Polish...................................................................................................................... 50
Russian ................................................................................................................... 52
Arabic..................................................................................................................... 54
Japanese ................................................................................................................ 56
TH6 7 +/ TH6 7 / TH6 7 B
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
„
„
„
„
„
„
1.2
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
PACKAGE CHECKLIST
Serial ATA Cable X 3
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
TH67+ / TH67
CPU
Chipset
TH67B
Socket 1155
Socket 1155
Intel Core i7 / i5 / i3/ Pentium processor
Intel Core i7 / i5 / i3/ Pentium processor
Supports Execute Disable Bit / Enhanced Intel
Supports Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended
Memory 64 Technology / Virtualization
Memory 64 Technology / Virtualization
Technology
Technology
Intel H67
Intel H67
ITE 8728
ITE 8728
Provides the most commonly used legacy Super Provides the most commonly used legacy Super
Super I/O
I/O functionality.
I/O functionality.
Low Pin Count Interface
Low Pin Count Interface
Environment Control initiatives,
Environment Control initiatives,
Hardware Monitor Controller
Hardware Monitor Controller
Fan Speed Controller
Fan Speed Controller
ITE's "Smart Guardian" function
ITE's "Smart Guardian" function
DIMM Slots x 4
DIMM Slots x 4
Each DIMM supports 512MB / 1GB / 2GB / 4GB Each DIMM supports 512MB / 1GB / 2GB / 4GB
Main Memory
SATA 2 & 3
LAN
DDR3
DDR3
Max Memory Capacity 16GB
Max Memory Capacity 16GB
Dual Channel Mode DDR3 memory module
Dual Channel Mode DDR3 memory module
Supports DDR3 1333/1066
Supports DDR3 1333/1066
Registered DIMM and ECC DIMM is not
Registered DIMM and ECC DIMM is not
supported
supported
Integrated Serial ATA Controller
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.
Data transfer rates up to 3.0 Gb/s / 6.0 Gb/s.
SATA Version 2.0 / 3.0 specification compliant
SATA Version 2.0 / 3.0 specification compliant
Realtek RTL8111E
Realtek RTL8111E
10 / 100 Mb/s / 1Gb/s auto negotiation
10 / 100 Mb/s / 1Gb/s auto negotiation
ALC892
ALC892
Sound Codec 5.1 channels audio out
5.1 channels audio out
High Definition Audio
USB3.0
Slots
2
High Definition Audio
NEC uPD720200 / Asmedia ASM1042
PCI slot
x1
PCI slot
x1
PCI-E Gen2 x16 @ x16 slot
x1
PCI-E Gen2 x16 @ x16 slot
x1
PCI-E Gen2 x16 @ x4 slot
x1
PCI-E Gen2 x16 @ x4 slot
x1
PCI-E Gen2 x1 slot
x1
PCI-E Gen2 x1 slot
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
On Board
Connectors
Back Panel
I/O
TH67B
Serial Port Connector
x1
Serial Port Connector
x1
SATA 3 Connector
x2
SATA 3 Connector
x2
SATA 2 Connector
x4
SATA 2 Connector
x4
Front Panel Connector
x1
Front Panel Connector
x1
Front Audio Connector
x1
Front Audio Connector
x1
S/PDIF out Connector
x1
S/PDIF out Connector
x1
CPU Fan Header
x1
CPU Fan Header
x1
System Fan Header
x2
System Fan Header
x2
Clear CMOS Header
x1
Clear CMOS Header
x1
USB 2.0 Connector
x3
USB 2.0 Connector
x3
Consumer IR Connector
x1
Consumer IR Connector
x1
Power Connector (24pin)
x1
Power Connector (24pin)
x1
Power Connector (8pin)
x1
Power Connector (4pin)
x1
PS/2 Keyboard / Mouse
x1
HDMI Port
x1
PS/2 Keyboard / Mouse
x1
VGA Port
x1
HDMI Port
x1
DVI-D Port
x1
VGA Port
x1
LAN Port
x1
DVI-D Port
x1
USB2.0 Port (by H67)
x2
LAN Port
x1
USB2.0 Port
x4
Audio Jack
x3
USB3.0 Port (by NEC uPD720200 /
Board Size
OS Support
1.4
Asmedia ASM1042)
x2
Audio Jack
x3
230 (W) x 244 (L) mm
230 (W) x 244 (L) mm
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostar reserves the right to add or remove
Biostar reserves the right to add or remove
support for any OS with or without notice
support for any OS with or without notice
REAR PANEL CONNECTORS
PS/2
Keyboard / Mouse
LAN
Line In/
Surround
Line Out
Mic In 1/
Bass/ Center
USB2.0X2
HDMI
DVI-D
VGA
USB3.0X2
(For TH67+ & TH67)
USB2.0X2
(For TH67B)
NOTE:
Any of 2 HDMI / DVI-D / VGA can provide digital video signals out-put function.
NOTE:
USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is
controlled by NEC uPD720200 / Asmedia ASM1042, but, USB2.0/USB1.X is controlled by
H67.
3
Motherboard Manual
1.5
MOTHERBOARD LAYOUT (TH67+ / TH67)
USB_KBMS1
CP U_FAN 1
ATXPWR2
HDMI1
PHS
PH3
PH2
PH1
VTT_ LED1
DD R3_ B2
DD R3_B1
CPU 1
DD R3_A2
DD R3_A1
D VI1
Socket 1155
JCMOS1
VGA1
R J45USB1
AU DIO1
ATXP W R1
SYS_FAN 2
PEX16_1
PEX1_1
LAN
Super
I/O
BAT1
H67
PEX16_2
BIOS
SW _RS T1
SW _PW R1
PCI1
CODEC
LED_D1
JSP DI FO UT1 J_COM 1
F_AUDIO1
S YS _FAN 1
F_USB 3 F_US B 2
C IR1
Note: ■ represents the 1st pin.
4
SATA2
SATA1
SATA4
SATA3
SATA6
SATA5
LED_D2
F_U SB 1
PAN EL1
TH6 7 +/ TH6 7 / TH6 7 B
1.6
MOTHERBOARD LAYOUT (TH67B)
USB _KB MS 1
CP U_FAN 1
ATX PW R2
HDMI1
DD R3_ B2
DD R3_B1
CPU 1
DD R3_A2
DD R3_A1
D VI1
Socket 1155
JCMOS1
VGA1
R J45US B 1
AU DIO 1
ATXP W R1
S Y S_FAN 2
PEX16_1
PEX1_1
LAN
Super
I/O
BAT1
H67
PEX16_2
BIOS
SW _RS T1
SW _PW R1
PCI1
CODEC
LED_D1
JSP DI FO UT1 J_COM 1
F_AUDIO1
S YS _FAN 1
F_USB 3 F_US B 2
C IR1
SATA2
SATA1
SATA4
SATA3
SATA6
SATA5
LED_D2
F_U SB 1
PAN EL1
Note: ■ represents the 1st pin.
5
Motherboard Manual
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up.
Step 2: Remove the Pin Cap.
6
TH6 7 +/ TH6 7 / TH6 7 B
Step 3: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 4: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.
7
Motherboard Manual
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
1
4
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control
4
SYS_FAN1/SYS_FAN2: System Fan Headers
Pin
SYS_FAN2
1
1
2
3
Assignment
Ground
+12V
FAN RPM
rate sense
3
SYS_FAN1
Note:
The SYS_FAN1/SYS_FAN2 support 3-pin head connectors; the CPU_FAN1 supports
4-pin head connector. When connecting with wires onto connectors, please note that the
red wire is the positive and should be connected to pin#2, and the black wire is Ground
and should be connected to GND.
8
TH6 7 +/ TH6 7 / TH6 7 B
2.3
INSTALLING SYSTEM MEMORY
DDR3_B1
DDR3_B2
DDR3_A1
DDR3_A2
A. Memory Modules
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
9
Motherboard Manual
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB
DDR3_A2
512MB/1GB/2GB/4GB
DDR3_B1
512MB/1GB/2GB/4GB
DDR3_B2
512MB/1GB/2GB/4GB
Total Memory
Size
Max is 16GB.
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
Enabled
X
O
X
O
Enabled
O
O
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
Note:
Memory module must be installed in DDR3-A2 or DDR3-B2 to boot the
system.
10
TH6 7 +/ TH6 7 / TH6 7 B
2.4
CONNECTORS AND SLOTS
SATA1 ~ SATA6: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 6 channels SATA interface.
SATA1 & SATA2 satisfy the SATA 3.0 spec and with transfer rate of 6.0Gb/s;
SATA3 ~ SATA6 satisfy the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
SATA2 SATA1
SATA4 SATA3
SATA6 SATA5
1
4
Pin
1
2
3
4
5
6
7
Assignment
Ground
TX+
TXGround
RXRX+
Ground
7
ATXPWR2: ATX Power Source Connector (TH67+ / TH67)
This connector provides +12V to CPU power circuit. If the CPU power plug is
4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2.
5
1
8
4
Pin
1
2
3
4
5
6
7
8
Assignment
+12V
+12V
+12V
+12V
Ground
Ground
Ground
Ground
11
Motherboard Manual
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
Pin
1
2
3
4
5
6
7
8
9
10
11
12
12
24
1
13
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
ATXPWR2: ATX Power Source Connector (TH67B)
This connector provides +12V to CPU power circuit.
3
4
1
2
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
Note:
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been well plugged-in.
12
TH6 7 +/ TH6 7 / TH6 7 B
PEX16_1: PCI-Express Gen2 x16 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
2X bandwidth over the PCI-Express 1.1 architecture.
PEX16_2: PCI-Express Gen2 x4 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 2GB/s simultaneously per
direction, for an aggregate of 4GB/s totally.
PEX1_1: PCI-Express Gen2 x1 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
PEX1 6_ 1
PEX1 _1
PEX1 6_ 2
PCI1: Peripheral Component Interconnect Slot
This motherboard is equipped with 1 standard PCI slot. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
13
Motherboard Manual
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
POW_LED
On/Off
+ + -
9
1
16
8
+ SPK
RST
HLED
Pin
1
2
3
4
5
6
7
8
14
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
TH6 7 +/ TH6 7 / TH6 7 B
F_USB1/F_USB2/F_USB3: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
F_ USB3 F_ USB1
F_USB2
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
Pin
1
2
3
4
5
6
Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power
2 6
1 5
15
Motherboard Manual
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
1
16
3
Assignment
+5V
SPDIF_OUT
Ground
TH6 7 +/ TH6 7 / TH6 7 B
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation
(default).
3
1
1
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
2
10
1
9
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
17
Motherboard Manual
On-Board LED Indicators
There are 7 LED indicators on the motherboard showing system status.
PHS
PH3
PH2
PH1
VT T_LED1
LED_D1
LED_D2
LED_D1 & LED_D2: Debug Indicators
PHS / PH1 ~ PH3 / VTT_LED1 (TH67+ / TH67): Power Status Indicators
Please refer to the tables below for specific messages:
LED_D1
ON
ON
OFF
OFF
LED_D2
ON
OFF
ON
OFF
PHS
PH1~PH3
VTT_LED
ON
OFF
Message
Normal
Memory Error
VGA Error
Abnormal: CPU / Chipset error.
Phase Indicator (TH67+ /
TH67)
Phase Active
Phase Inactive
On-Board Buttons
There are 2 on-board buttons.
SW_RST1
SW_PWR1
SW_RST1: Reset button.
SW_PWR1: Power Switch button.
18
TH6 7 +/ TH6 7 / TH6 7 B
CHAPTER 4: RAID FUNCTIONS
4.1
OPERATING SYSTEM
Supports Windows Vista and Windows 7.
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
4.3
HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
19
Motherboard Manual
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
20
Block 1
Block 2
Block 3
TH6 7 +/ TH6 7 / TH6 7 B
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­
­
­
­
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Block 3
Block 5
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
21
Motherboard Manual
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.
Features and Benefits
­
­
­
­
­
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
22
TH6 7 +/ TH6 7 / TH6 7 B
CHAPTER 5: T-SERIES BIOS & SOFTWARE
5.1
T-SERIES UEFI BIOS
T-Series UEFI BIOS Features
Overclocking Navigator Engine (O.N.E.)
Self Recovery System (S.R.S)
Smart Fan Function
BIO-Flasher: Update UEFI BIOS file from USB Flash Drive
!! WARNING !!
For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below
in this manual is for your reference only and the actual UEFI BIOS
information and settings on board may be different from this
manual. For further information of setting up the UEFI BIOS,
please refer to the UEFI BIOS Manual in the Setup CD.
A. Overclocking Navigator Engine (O.N.E.)
O.N.E provides 4 systems allowing users to customize personal overclock
settings: Manual CPU System, Manual Memory System, Manual PWM
System, and Manual Voltage System.
Main
Advanced
Chipset
BIOS SETUP UTILITY
Boot
Security
O.N.E
Notice: Please Clear CMOS if system no display
after overclocking
Start Page
[Page - Main]
====Manual CPU system====
Fixed CPU Ratio
CPU Ratio
CPU Core Current Max(Amp)
Power Limit 1 Value (Watt)
Power Limit 2 Switch
Power Limit 2 Value
Enhanced Intel SpeedStep Tech
Turbo Mode
CPU CIE
Graphics Core Ratio Limit
CPU Clock
Spread Spectrum
[Disabled]
31
150
95
[Enabled]
118
[Enabled]
[Enabled]
[Enabled]
22
100
[Auto]
Save & Exit
You can set the entrance Page
when you enter UEFI BIOS
Setup
Enter
+/F1
F3
F4
ESC
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Notice:
Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
23
Motherboard Manual
NOTE
Overclock is an optional process, but not a “must-do” process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.
B. Self Recovery System (S.R.S.)
This function can’t be seen under UEFI BIOS setup, and is always on whenever
the system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default UEFI
BIOS setting, and all overclock settings will be re-configured.
C. Smart Fan Function
Smart Fan Function is under “Smart Fan Control” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
Main
>
>
>
>
>
>
>
>
Advanced
Chipset
BIOS SETUP UTILITY
Boot
Security
O.N.E
PCI Subsystem Settings
ACPI Settings/WakeUp Event control
CPU Configuration
SATA Configuration
USB Configuration
SMART FAN Control
Super IO Configuration
H/W Monitor
Save & Exit
SMART FAN Control
Enter
+/F1
F3
F4
ESC
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
↓
24
TH6 7 +/ TH6 7 / TH6 7 B
Advanced
BIOS SETUP UTILITY
SMART FAN Control
CPU Smart FAN
> CPU FAN Calibrate
Control Mode
FAN Ctrl OFF(oC)
FAN Ctrl ON( oC)
FAN Ctrl Start value
FAN Ctrl Sensitive
[Disabled]
CPU FAN Smart control
function. [Disabled]: Full ON
[Auto]:By parameters below.
[Manual]
Enter
+/F1
F3
F4
ESC
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
CPU Smart FAN
This item allows you to control the CPU Smart Fan function.
CPU FAN Calibrate
Press [ENTER] to calibrate CPU FAN.
Control Mode
This item provides several operation modes of the fan.
Fan Ctrl OFF(℃)
When CPU temperature is lower than this value, the CPU fan will keep
lowest RPM. The range is from 0~127, with an interval of 1.
Fan Ctrl On(℃)
When CPU temperature is higher than this value, the CPU fan controller
will turn on. The range is from 0~127, with an interval of 1.
Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value. The range is from 0~127, with
an interval of 1.
Fan Ctrl Sensitive
The bigger the numeral is, the higher the FAN speed is. The range is from
0~127, with an interval of 1.
25
Motherboard Manual
5.2
T-SERIES SOFTWARE
Installing T-Series Software
1. Insert the Setup CD to the optical drive. The driver installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.
Launching T-Series Software
After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.
TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status. This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The illustration below is for reference only)
26
TH6 7 +/ TH6 7 / TH6 7 B
The CPU tab provides information on the CPU and motherboard.
The Memory tab provides information on the memory module(s).
You can select memory module on a specific slot to see its information.
The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:
27
Motherboard Manual
3 Pre-set Modes: V6, V12, AUTO for different overclocking experience.
The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.
28
TH6 7 +/ TH6 7 / TH6 7 B
Pressing TOVERCLOCKER logo
displays information about
manufacturer and software version.
You can update current version by
clicking the button “Live Update.”
Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)
Typical Mode
Display manufacturer &
software version information
Performance
Mode
Medium Mode
Maxi-Energy Mode
Auto P hase Mode
Reset Time &
Consumption
Display CPU
information
29
Motherboard Manual
G.P.U Mode Setting
This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.
Note: Even if the modes saving more power consumption are chosen, the
system still can keep excellent performance.
30
„
Auto Phase Mode
System switches the mode automatically according to current system
loading condition.
„
Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.
„
Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.
„
Medium Mode
This is the standard system power saving mode.
„
Maxi-Energy Mode
This is the best system performance mode.
TH6 7 +/ TH6 7 / TH6 7 B
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represent s import ant
*information
that you
must provide. Without
this informat ion, you may
not be able to send out
the mail.
This block will show
the information which
would be collect ed in
the mail.
condition
* Describe
of your system.
your area or
* Select
the area close to you.
Provide the e-mail
address that you would
like to send t he copy to.
the name of
* Provide
the memory module
manufacturer.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
31
Motherboard Manual
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
32
TH6 7 +/ TH6 7 / TH6 7 B
BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS
Show current BIOS information
AMI BIOS
Clear CMOS function
(Only for AWARD BIOS)
Save current BIOS
to a .bin file
Update BIOS
with a BIOS file
<Backup BIOS>
Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.
33
Motherboard Manual
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this
manual.
34
TH6 7 +/ TH6 7 / TH6 7 B
BIOScreen Utility (Optional)
This utility allows you to personalize your boot logo easily. You can choose
JPG or BMP as your boot logo so as to customize your computer.
Please follow the following instructions to update boo logo:
1. Load Image:Choose the picture as the boot logo.
2. Transform:Transform the picture for BIOS and preview the result.
3. Update Bios:Write the picture to BIOS Memory to complete the update.
35
Motherboard Manual
CHAPTER 6: USEFUL HELP
6.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
36
TH6 7 +/ TH6 7 / TH6 7 B
6.2
EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
37
Motherboard Manual
6.3
TROUBLESHOOTING
Probable
1.
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.
Solution
1.
2.
3.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
1.
Back up data and applications
drive. Hard disks can be read,
files.
applications can be used, but system 2.
Reformat the hard drive.
fails to boot from a hard disk.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
38
TH6 7 +/ TH6 7 / TH6 7 B
This page is intentionally left blank.
39
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
TH67+ / TH67
CPU
Chipsatz
Super E/A
TH67B
Socket 1155
Socket 1155
Intel Core i7 / i5 / i3/ Pentium Prozessoren
Intel Core i7 / i5 / i3/ Pentium Prozessoren
Unterstützt Execute Disable Bit / Enhanced Intel Unterstützt Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended
Memory 64 Technology / Virtualization
Memory 64 Technology / Virtualization
Technology
Technology
Intel H67
Intel H67
ITE 8728
ITE 8728
Bietet die häufig verwendeten alten Super
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
E/A-Funktionen.
Low Pin Count-Schnittstelle
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Umgebungskontrolle,
Hardware-Überwachung
Hardware-Überwachung
Lüfterdrehzahl-Controller/-Überwachung
Lüfterdrehzahl-Controller/-Überwachung
"Smart Guardian"-Funktion von ITE
"Smart Guardian"-Funktion von ITE
DDR3 DIMM-Steckplätze x 4
DDR3 DIMM-Steckplätze x 4
Jeder DIMM unterstützt 512MB / 1GB / 2GB /
Jeder DIMM unterstützt 512MB / 1GB / 2GB /
4GB DDR3.
4GB DDR3.
Arbeitsspeich Max. 16GB Arbeitsspeicher
er
SATA 2 & 3
LAN
HD
Max. 16GB Arbeitsspeicher
Dual-Kanal DDR3 Speichermodul
Dual-Kanal DDR3 Speichermodul
Unterstützt DDR3 1333/1066
Unterstützt DDR3 1333/1066
registrierte DIMMs. ECC DIMMs werden nicht
registrierte DIMMs. ECC DIMMs werden nicht
unterstützt.
unterstützt.
Integrierter Serial ATA-Controller
Integrierter Serial ATA-Controller
Datentransferrate bis zu 3.0Gb/s / 6.0 Gb/s
Datentransferrate bis zu 3.0Gb/s / 6.0 Gb/s
Konform mit der SATA-Spezifikation Version 2.0 Konform mit der SATA-Spezifikation Version 2.0
/ 3.0.
/ 3.0.
Realtek RTL8111E
Realtek RTL8111E
10 / 100 / 1000 Mb/s Auto-Negotiation
10 / 100 / 1000 Mb/s Auto-Negotiation
ALC892
ALC892
Audio-Unters Unterstützt High-Definition Audio
tützung
USB3.0
40
5.1-Kanal-Audioausgabe
NEC uPD720200 / Asmedia ASM1042
PCI-Steckplatz
Steckplätze
Unterstützt High-Definition Audio
5.1-Kanal-Audioausgabe
x1
PCI-E Gen2 x 16 @ x16 Steckplatz x1
PCI-Steckplatz
x1
PCI-E Gen2 x 16 @ x16 Steckplatz x1
PCI-E Gen2 x 16 @ x4 Steckplatz
x1
PCI-E Gen2 x 16 @ x4 Steckplatz
x1
PCI-E Gen2 x1-Steckplatz
x1
PCI-E Gen2 x1-Steckplatz
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
x1
Serieller Anschluss
x1
SATA 3-Anschluss
x2
SATA 3-Anschluss
x2
SATA 2-Anschluss
x4
SATA 2-Anschluss
x4
Fronttafelanschluss
x1
Fronttafelanschluss
x1
Front-Audioanschluss
x1
Front-Audioanschluss
x1
Onboard-Ans S/PDIF- Ausgangsanschluss
CPU-Lüfter-Sockel
chluss
System-Lüfter-Sockel
x1
S/PDIF- Ausgangsanschluss
x1
x1
CPU-Lüfter-Sockel
x1
x2
System-Lüfter-Sockel
x2
"CMOS löschen"-Sockel
x1
"CMOS löschen"-Sockel
x1
USB 2.0-Anschluss
x3
USB 2.0-Anschluss
x3
Verbraucher-IR Anschluss
x1
Verbraucher-IR Anschluss
x1
Stromanschluss (24-polig)
x1
Stromanschluss (24-polig)
x1
Stromanschluss (8-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur / Maus
x1
HDMI-Anschluss
x1
VGA-Anschluss
x1
DVI-D-Anschluss
Rückseiten-E LAN-Anschluss
/A
TH67B
Serieller Anschluss
USB 2.0-Anschluss (durch H67)
x1
x1
x2
USB 3.0-Anschluss
(durch NEC uPD720200 /
Asmedia ASM1042)
Audioanschluss
x2
zung
x1
HDMI-Anschluss
x1
VGA-Anschluss
x1
DVI-D-Anschluss
x1
LAN-Anschluss
x1
USB 2.0-Anschluss
x4
Audioanschluss
x3
x3
Platinengröße 230mm (B) X 244 mm (L)
OS-Unterstüt
PS/2-Tastatur / Maus
230mm (B) X 244 mm (L)
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostar behält sich das Recht vor, ohne
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
Betriebssystem hinzuzufügen oder zu
entfernen.
entfernen.
41
Motherboard Manual
FRENCH
TH67+ / TH67
UC
TH67B
Socket 1155
Socket 1155
Processeurs Intel Core i7 / i5 / i3/ Pentium
Processeurs Intel Core i7 / i5 / i3/ Pentium
Prend en charge les technologies d'exécution de Prend en charge les technologies d'exécution de
bit de désactivation / Intel SpeedStep®
bit de désactivation / Intel SpeedStep®
optimisée/ d'architecture Intel 64 / de mémoire optimisée/ d'architecture Intel 64 / de mémoire
Chipset
Super E/S
Mémoire
principale
SATA 2 & 3
LAN
Prise en
étendue 64 / de virtualisation
étendue 64 / de virtualisation
Intel H67
Intel H67
ITE 8728
ITE 8728
Fournit la fonctionnalité de Super E/S
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
patrimoniales la plus utilisée.
Interface à faible compte de broches
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Initiatives de contrôle environnementales,
Moniteur de matériel
Moniteur de matériel
Contrôleur /moniteur de vitesse de ventilateur
Contrôleur /moniteur de vitesse de ventilateur
Fonction "Gardien intelligent" de l'ITE
Fonction "Gardien intelligent" de l'ITE
Fentes DDR3 DIMM x 4
Fentes DDR3 DIMM x 4
Chaque DIMM prend en charge des DDR3 de
Chaque DIMM prend en charge des DDR3 de
512Mo / 1Go / 2Go / 4Go
512Mo / 1Go / 2Go / 4Go
Capacité mémoire maximale de 16Go
Capacité mémoire maximale de 16Go
Module de mémoire DDR3 à mode à double voie Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 1333/1066
Prend en charge la DDR3 1333/1066
Les DIMM à registres et DIMM avec code
Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne sont pas prises en
correcteurs d'erreurs ne sont pas prises en
charge
charge
Contrôleur Serial ATA intégré
Contrôleur Serial ATA intégré
Taux de transfert jusqu'à 3.0Go/s / 6.0 Gb/s.
Taux de transfert jusqu'à 3.0Go/s / 6.0 Gb/s.
Conforme à la spécification SATA Version 2.0 /
Conforme à la spécification SATA Version 2.0 /
3.0
3.0
Realtek RTL8111E
Realtek RTL8111E
10 / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique
ALC892
ALC892
charge audio Prise en charge de l'audio haute définition
HD
Sortie audio à 5.1 voies
USB3.0
NEC uPD720200 / Asmedia ASM1042
Fentes
42
Prise en charge de l'audio haute définition
Sortie audio à 5.1 voies
Fente PCI
x1
Fente PCI
Fente PCI-E Gen2 x 16 @ x16
x1
Fente PCI-E Gen2 x 16 @ x16
x1
x1
Fente PCI-E Gen2 x 16 @ x4
x1
Fente PCI-E Gen2 x 16 @ x4
x1
Fente PCI-E Gen2 x1
x1
Fente PCI-E Gen2 x1
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
TH67B
Port série
x1
Port série
x1
Connecteur SATA 3
x2
Connecteur SATA 3
x2
Connecteur SATA 2
x4
Connecteur SATA 2
x4
Connecteur du panneau avant
x1
Connecteur du panneau avant
x1
Connecteur Audio du panneau avant x1
Connecteur
embarqué
Connecteur Audio du panneau avant x1
Connecteur de sortie S/PDIF
x1
Connecteur de sortie S/PDIF
x1
Embase de ventilateur UC
x1
Embase de ventilateur UC
x1
Embase de ventilateur système
x2
Embase de ventilateur système
x2
Embase d'effacement CMOS
x1
Embase d'effacement CMOS
x1
Connecteur USB 2.0
x3
Connecteur USB 2.0
x3
Connecteur de IR du consommateur x1
Connecteur de IR du consommateur x1
Connecteur d'alimentation
x1
Connecteur d'alimentation
x1
Connecteur d'alimentation
(24 broches)
Connecteur d'alimentation
x1
(24 broches)
(8 broches)
x1
(4 broches)
Clavier / Souris PS/2
x1
Port HDMI
x1
Clavier / Souris PS/2
x1
Port VGA
x1
Port HDMI
x1
x1
E/S du
Port DVI-D
x1
Port VGA
panneau
Port LAN
x1
Port DVI-D
x1
arrière
Port USB 2.0 (par H67)
x2
Port LAN
x1
Dimensions
Port USB 3.0 (par NEC uPD720200 /
Port USB 2.0
x4
Asmedia ASM1042)
x2
Fiche audio
x3
Fiche audio
x3
230mm (l) X 244 mm (H)
230mm (l) X 244 mm (H)
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans
supprimer le support de SE avec ou sans
préavis.
préavis.
de la carte
Support SE
43
Motherboard Manual
ITALIAN
TH67+ / TH67
TH67B
Socket 1155
Socket 1155
Processore Intel Core i7 / i5 / i3/ Pentium Processore Intel Core i7 / i5 / i3/ Pentium
CPU
Chipset
Super I/O
Supporto di Execute Disable Bit / Enhanced Supporto di Execute Disable Bit / Enhanced
Intel SpeedStep® / Architettura Intel 64 / Intel SpeedStep® / Architettura Intel 64 /
Tecnologia Extended Memory 64 /
Tecnologia Extended Memory 64 /
Tecnologia V irtualization
Tecnologia V irtualization
Intel H67
Intel H67
ITE 8728
ITE 8728
Fornisce le funzionalità legacy Super I/O
Fornisce le funzionalità legacy Super I/O
usate più comunemente.
usate più comunemente.
Interfaccia LPC (Low Pin Count)
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Monitoraggio hardware
Controller / Monitoraggio velocità ventolina Controller / Monitoraggio velocità ventolina
Memoria
principale
Funzione "Smart Guardian" di ITE
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 4
Alloggi DIMM DDR3 x 4
Ciascun DIMM supporta DDR3 512MB /
Ciascun DIMM supporta DDR3 512MB /
1GB / 2GB / 4GB
1GB / 2GB / 4GB
Capacità massima della memoria 16GB
Capacità massima della memoria 16GB
Modulo di memoria DDR3 a canale doppio Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 1333/1066
Supporto di DDR3 1333/1066
DIMM registrati e DIMM ECC non sono
DIMM registrati e DIMM ECC non sono
supportati
supportati
Controller Serial ATA integrato
Controller Serial ATA integrato
Velocità di trasferimento dei dati fino a
Velocità di trasferimento dei dati fino a
3.0Gb/s / 6.0 Gb/s.
SATA 2 & 3 3.0Gb/s / 6.0 Gb/s.
Compatibile specifiche SATA Versione 2.0 / Compatibile specifiche SATA Versione 2.0 /
LAN
3.0.
3.0.
Realtek RTL8111E
Realtek RTL8111E
Negoziazione automatica 10 / 100 / 1000Mb/s Negoziazione automatica 10 / 100 / 1000Mb/s
ALC892
ALC892
Supporto audio High-Definition (HD)
Supporto audio High-Definition (HD)
audio HD
Uscita audio 5.1 canali
Uscita audio 5.1 canali
USB3.0
NEC uPD720200 / Asmedia ASM1042
Supporto
Alloggio PCI
Alloggi
44
x1
Alloggio PCI
x1
Alloggio PCI-E Gen2 x16 @ x16 x1
Alloggio PCI-E Gen2 x16 @ x16 x1
Alloggio PCI-E Gen2 x16 @ x4 x1
Alloggio PCI-E Gen2 x16 @ x4 x1
Alloggio PCI Express Gen2 x1
Alloggio PCI Express Gen2 x1
x1
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
Connettori
su scheda
TH67B
Porta seriale
x1
Porta seriale
x1
Connettore SATA 3
x2
Connettore SATA 3
x2
Connettore SATA 2
x4
Connettore SATA 2
x4
Connettore pannello frontale
x1
Connettore pannello frontale
x1
Connettore audio frontale
x1
Connettore audio frontale
x1
Connettore output SPDIF
x1
Connettore output SPDIF
x1
Collettore ventolina CPU
x1
Collettore ventolina CPU
x1
Collettore ventolina sistema
x2
Collettore ventolina sistema
x2
Collettore cancellaz ione CMOS
x1
Collettore cancellaz ione CMOS
x1
Connettore USB 2.0
x3
Connettore USB 2.0
x3
Connettore IR del consumatore x1
Connettore IR del consumatore x1
Connettore alimentazione
Connettore alimentazione
x1
(24 pin)
Connettore alimentazione
x1
(8 pin)
I/O pannello
posteriore
Dimensioni
x1
(24 pin)
Connettore alimentazione
x1
(4 pin)
Tastiera / Mouse PS/2
x1
Porta HDMI
x1
Tastiera / Mouse PS/2
x1
Porta VGA
x1
Porta HDMI
x1
Porta DVI-D
x1
Porta VGA
x1
Porta LAN
x1
Porta DVI-D
x1
Porta USB 2.0 (da H67)
x2
Porta LAN
x1
Porta USB 3.0 (da NEC uPD720200 /
Porta USB 2.0
x4
Asmedia ASM1042)
x2
Connettore audio
x3
Connettore audio
x3
230mm (larghezza) x 244 mm (altezza)
230mm (larghezza) x 244 mm (altezza)
Windows XP / Vista / 7
Windows XP / Vista / 7
scheda
Sistemi
operativi
supportati
Biostar si riserva il diritto di aggiungere o Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
operativo senza preavviso.
45
Motherboard Manual
SPANISH
TH67+ / TH67
CPU
TH67B
Socket 1155
Socket 1155
Procesador Intel Core i7 / i5 / i3/ Pentium
Procesador Intel Core i7 / i5 / i3/ Pentium
Admite Bit de deshabilitación de ejecución / Intel Admite Bit de deshabilitación de ejecución / Intel
SpeedStep® Mejorado / Intel Architecture-64 / SpeedStep® Mejorado / Intel Architecture-64 /
Tecnología Extended Memory 64 / Tecnología de Tecnología Extended Memory 64 / Tecnología de
Conjunto de
virtualización
virtualización
Intel H67
Intel H67
ITE 8728
ITE 8728
chips
Le ofrece las funcionalidades heredadas de uso Le ofrece las funcionalidades heredadas de uso
Súper E/S
más común Súper E/S.
más común Súper E/S.
Interfaz de cuenta Low Pin
Interfaz de cuenta Low Pin
Iniciativas de control de entorno,
Iniciativas de control de entorno,
Monitor hardware
Monitor hardware
Controlador/monitor de velocidad de ventilador Controlador/monitor de velocidad de ventilador
Función "Guardia inteligente" de ITE
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR3 x 4
Ranuras DIMM DDR3 x 4
Cada DIMM admite DDR de 512MB / 1GB / 2GB / Cada DIMM admite DDR de 512MB / 1GB / 2GB
Memoria
principal
SATA 2 & 3
Red Local
Soporte de
4GB
/ 4GB
Capacidad máxima de memoria de 16GB
Capacidad máxima de memoria de 16GB
Módulo de memoria DDR3 de canal Doble
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 1333/1066
Admite DDR3 de 1333/1066
No admite DIMM registrados o DIMM
No admite DIMM registrados o DIMM
compatibles con ECC
compatibles con ECC
Controlador ATA Serie Integrado
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 3.0 Gb/s / 6.0 Gb/s. Tasas de transferencia de hasta 3.0 Gb/s / 6.0 Gb/s.
Compatible con la versión SATA 2.0 / 3.0.
Compatible con la versión SATA 2.0 / 3.0.
Realtek RTL8111E
Realtek RTL8111E
Negociación de 10 / 100 / 1000 Mb/s
Negociación de 10 / 100 / 1000 Mb/s
ALC892
ALC892
Soporte de sonido de Alta Definición
Soporte de sonido de Alta Definición
sonido HD
Salida de sonido de 5.1 canales
Salida de sonido de 5.1 canales
USB3.0
NEC uPD720200 / Asmedia ASM1042
Ranuras
46
Ranura PCI
X1
Ranura PCI
Ranura PCI-E Gen2 x16 @ x16
X1
Ranura PCI-E Gen2 x16 @ x16
X1
X1
Ranura PCI-E Gen2 x16 @ x4
X1
Ranura PCI-E Gen2 x16 @ x4
X1
Ranura PCI-E Gen2 x 1
X1
Ranura PCI-E Gen2 x 1
X1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
Conectores
en placa
TH67B
Puerto serie
X1
Puerto serie
X1
Conector SATA 3
X2
Conector SATA 3
X2
Conector SATA 2
X4
Conector SATA 2
X4
Conector de panel frontal
X1
Conector de panel frontal
X1
Conector de sonido frontal
X1
Conector de sonido frontal
X1
Conector de salida S/PDIF
X1
Conector de salida S/PDIF
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de sistema X2
Cabecera de borrado de CMOS
X1
Cabecera de borrado de CMOS
X1
Conector USB 2.0
X3
Conector USB 2.0
X3
Conector de IR del consumidor
X1
Conector de IR del consumidor
X1
Conector de alimentación
X1
Conector de alimentación
X1
(24 patillas)
Conector de alimentación
(24 patillas)
X1
(8 patillas)
Panel trasero
de E/S
Tamaño de la
Cabecera de ventilador de sistema X2
Conector de alimentación
X1
(4 patillas)
Teclado / Ratón PS/2
X1
Ratón HDMI
X1
Teclado / Ratón PS/2
X1
Puerto VGA
X1
Ratón HDMI
X1
Puerto DVI-D
X1
Puerto VGA
X1
Puerto de red local
X1
Puerto DVI-D
X1
X2
Puerto de red local
X1
Puerto USB 2.0 (por H67)
Puerto USB 3.0 (por NEC uPD720200 /
Puerto USB 2.0
X4
Asmedia ASM1042)
X2
Conector de sonido
X3
Conector de sonido
X3
230mm. (A) X 244 Mm. (H)
230mm. (A) X 244 Mm. (H)
Windows XP / Vista / 7
Windows XP / Vista / 7
placa
Soporte de
sistema
operativo
Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar
el soporte de cualquier SO con o sin aviso
el soporte de cualquier SO con o sin aviso
previo.
previo.
47
Motherboard Manual
PORTUGUESE
TH67+ / TH67
CPU
TH67B
Socket 1155
Socket 1155
Processador Intel Core i7 / i5 / i3/ Pentium
Processador Intel Core i7 / i5 / i3/ Pentium
Suporta as tecnologias Execute Disable Bit /
Suporta as tecnologias Execute Disable Bit /
Enhanced Intel SpeedStep® / Intel Arquitecture Enhanced Intel SpeedStep® / Intel Arquitecture
-64 / Extended Memory 64 / Virtualization
Chipset
Intel H67
Intel H67
ITE 8728
ITE 8728
Proporciona as funcionalidades mais utilizadas
Proporciona as funcionalidades mais utilizadas
em termos da especificação Super I/O.
em termos da especificação Super I/O.
Especificação Interface LPC (Low Pin Count).
Super I/O
-64 / Extended Memory 64 / Virtualization
Interface LPC (Low Pin Count).
Iniciativas para controlo do ambiente
Iniciativas para controlo do ambiente
Monitorização do hardware
Monitorização do hardware
Controlador/Monitor da velocidade da ventoinha Controlador/Monitor da velocidade da ventoinha
Função "Smart Guardian" da ITE
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR3 x 4
Ranhuras DIMM DDR3 x 4
Cada módulo DIMM suporta uma memória
Cada módulo DIMM suporta uma memória
DDR3 de 512 MB / 1GB / 2GB / 4GB
DDR3 de 512 MB / 1GB / 2GB / 4GB
Memória
Capacidade máxima de memória:16GB Módulo Capacidade máxima de memória:16GB Módulo
principal
de memória DDR3 de canal duplo
de memória DDR3 de canal duplo
Suporta módulos DDR3 1333/1066
Suporta módulos DDR3 1333/1066
Os módulos DIMM registados e os DIMM ECC
Os módulos DIMM registados e os DIMM ECC
não são suportados
não são suportados
Controlador Serial ATA integrado
Controlador Serial ATA integrado
Velocidades de transmissão de dados até 3.0 Gb/s Velocidades de transmissão de dados até 3.0 Gb/s
SATA 2 & 3
LAN
/ 6.0 Gb/s.
/ 6.0 Gb/s.
Compatibilidade com a especificação SATA
Compatibilidade com a especificação SATA
versão 2.0 / 3.0.
versão 2.0 / 3.0.
Realtek RTL8111E
Realtek RTL8111E
Auto negociação de 10 / 100 / 1000 Mb/s
Auto negociação de 10 / 100 / 1000 Mb/s
Suporte para ALC892
ALC892
áudio de alta Suporta a especificação High-Definition Audio
Suporta a especificação High-Definition Audio
definição
USB3.0
Ranhuras
48
Saída de áudio de 5.1 canais
Saída de áudio de 5.1 canais
NEC uPD720200 / Asmedia ASM1042
Ranhura PCI
x1
Ranhura PCI
Ranhura PCI-E Gen2 x16 @ x16
x1
Ranhura PCI-E Gen2 x16 @ x16
x1
x1
Ranhura PCI-E Gen2 x16 @ x4
x1
Ranhura PCI-E Gen2 x16 @ x4
x1
Ranhura PCI-E Gen2 x 1
x1
Ranhura PCI-E Gen2 x 1
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
Conectores
na placa
TH67B
Porta série
x1
Porta série
x1
Conector SATA 3
x2
Conector SATA 3
x2
Conector SATA 2
x4
Conector SATA 2
x4
Conector do painel frontal
x1
Conector do painel frontal
x1
Conector de áudio frontal
x1
Conector de áudio frontal
x1
Conector de saída S/PDIF
x1
Conector de saída S/PDIF
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x2
Conector da ventoinha do sistema
x2
Conector para limpeza do CMOS
x1
Conector para limpeza do CMOS
x1
Conector USB 2.0
x3
Conector USB 2.0
x3
Conector de IR do consumidor
x1
Conector de IR do consumidor
x1
Conector de alimentação
x1
Conector de alimentação
x1
(24 pinos)
Conector de alimentação
(24 pinos)
x1
(8 pinos)
Conector de alimentação
x1
(4 pinos)
Teclado / Rato PS/2
x1
Porta HDMI
x1
Teclado / Rato PS/2
x1
Porta VGA
x1
Porta HDMI
x1
Entradas/Saí Porta DVI-D
x1
Porta VGA
x1
das no painel Porta LAN
x1
Porta DVI-D
x1
x2
Porta LAN
x1
traseiro
Tamanho da
Porta USB 2.0 (por H67)
Porta USB 3.0 (por NEC uPD720200 /
Porta USB 2.0
x4
Asmedia ASM1042)
x2
Tomada de áudio
x3
Tomada de áudio
x3
230mm (L) X 244 mm (A)
230mm (L) X 244 mm (A)
Windows XP / Vista / 7
Windows XP / Vista / 7
A Biostar reserva-se o direito de adicionar ou
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.
operativo com ou sem aviso prévio.
placa
Sistemas
operativos
suportados
49
Motherboard Manual
POLISH
TH67+ / TH67
Procesor
Chipset
TH67B
Socket 1155
Socket 1155
Procesor Intel Core i7 / i5 / i3/ Pentium
Procesor Intel Core i7 / i5 / i3/ Pentium
Obsługa Execute Disable Bit / Enhanced Intel
Obsługa Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended
Memory 64 Technology / Virtualization
Memory 64 Technology / Virtualization
Technology
Technology
Intel H67
Intel H67
Gniazda DDR3 DIMM x 4
Gniazda DDR3 DIMM x 4
Każde gniazdo DIMM obsługuje moduły 512MB Każde gniazdo DIMM obsługuje moduły 512MB
Pamięć
główna
/ 1GB / 2GB / 4GB
/ 1GB / 2GB / 4GB
Maks. wielkość pamięci 16GB Moduł pamięci
Maks. wielkość pamięci 16GB Moduł pamięci
DDR3 z trybem podwójnego kanału
DDR3 z trybem podwójnego kanału
Obsługa DDR3 1333/1066
Obsługa DDR3 1333/1066
Brak obsługi Registered DIMM oraz ECC DIMM Brak obsługi Registered DIMM oraz ECC DIMM
Super I/O
SATA 2 & 3
ITE 8728
ITE 8728
Zapewnia najbardziej powszechne funkcje
Zapewnia najbardziej powszechne funkcje
Super I/O.
Super I/O.
Interfejs Low Pin Count
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Funkcje kontroli warunków pracy,
Monitor H/W
Monitor H/W
Kontroler/Monitor prędkości wentylatora
Kontroler/Monitor prędkości wentylatora
Funkcja ITE "Smart Guardian"
Funkcja ITE "Smart Guardian"
Zintegrowany kontroler Serial ATA
Zintegrowany kontroler Serial ATA
Transfer danych do 3.0 Gb/s / 6.0 Gb/s.
Transfer danych do 3.0 Gb/s / 6.0 Gb/s.
Zgodność ze specyfikacją SATA w wersji 2.0 /
Zgodność ze specyfikacją SATA w wersji 2.0 /
3.0.
3.0.
Realtek RTL8111E
Realtek RTL8111E
10 / 100 / 1000 Mb/s z automatyczną
10 / 100 / 1000 Mb/s z automatyczną
negocjacją szybkości
negocjacją szybkości
ALC892
ALC892
Obsługa High-Definition Audio
Obsługa High-Definition Audio
audio HD
5.1 kanałowe wyjście audio
5.1 kanałowe wyjście audio
USB3.0
NEC uPD720200 / Asmedia ASM1042
LAN
Obsługa
Gniazda
50
Gniazdo PCI
x1
Gniazdo PCI
x1
Gniazdo PCI-E Gen2 x16 @ x16
x1
Gniazdo PCI-E Gen2 x16 @ x16
x1
Gniazdo PCI-E Gen2 x16 @ x4
x1
Gniazdo PCI-E Gen2 x16 @ x4
x1
Gniazdo PCI-E Gen2 x 1
x1
Gniazdo PCI-E Gen2 x 1
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
Złącza
wbudowane
TH67B
Port szeregowy
x1
Port szeregowy
x1
Złącze SATA 3
x2
Złącze SATA 3
x2
Złącze SATA 2
x4
Złącze SATA 2
x4
Złącze panela przedniego
x1
Złącze panela przedniego
x1
Przednie złącze audio
x1
Przednie złącze audio
x1
Złącze wyjścia S/PDIF
x1
Złącze wyjścia S/PDIF
x1
Złącze główkowe wentylatora
procesora
Złącze główkowe wentylatora
x1
Złącze główkowe wentylatora
systemowego
x2
Złącze główkowe kasowania CMOS x1
Back Panel
I/O
Wymiary
procesora
x1
Złącze główkowe wentylatora
systemowego
x2
Złącze główkowe kasowania CMOS x1
Złącze USB 2.0
x3
Złącze USB 2.0
x3
Złącze Konsument IR
x1
Złącze Konsument IR
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (8 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura / Mysz PS/2
x1
Port HDMI
x1
Klawiatura / Mysz PS/2
x1
Port VGA
x1
Port HDMI
x1
Port DVI-D
x1
Port VGA
x1
Port LAN
x1
Port DVI-D
x1
Port USB 2.0 (przez H67)
x2
Port LAN
x1
Port USB 3.0 (przez NEC uPD720200 /
Port USB 2.0
x4
Asmedia ASM1042)
x2
Gniazdo audio
x3
Gniazdo audio
x3
230mm (S) X 244 mm (W)
230mm (S) X 244 mm (W)
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostar zastrzega sobie prawo dodawania lub
Biostar zastrzega sobie prawo dodawania lub
odwoływania obsługi dowolnego systemu
odwoływania obsługi dowolnego systemu
płyty
Obsluga
systemu
operacyjnego operacyjnego bez powiadomienia.
operacyjnego bez powiadomienia.
51
Motherboard Manual
RUSSIAN
TH67+ / TH67
TH67B
Socket 1155
Процессор Intel Core i7 / i5 / i3/ Pentium
CPU
Поддержка технологий Execute Disable Bit /
(центральны
Enhanced Intel SpeedStep® / Intel
й процессор) Architecture-64 / Extended Memory 64
Technology / технологии виртуализация
Набор
микросхем
Основная
Socket 1155
Процессор Intel Core i7 / i5 / i3/ Pentium
Поддержка технологий Execute Disable Bit /
Enhanced Intel SpeedStep® / Intel
Architecture-64 / Extended Memory 64
Technology / технологии виртуализация
Intel H67
Intel H67
Слоты DDR3 DIMM x 4
Каждый модуль DIMM поддерживает 512МБ /
1ГБ / 2ГБ / 4ГБ DDR3
Максимальная ёмкость памяти 16ГБ
Модуль памяти с двухканальным режимом
Слоты DDR3 DIMM x 4
Каждый модуль DIMM поддерживает 512МБ /
1ГБ / 2ГБ / 4ГБ DDR3
Максимальная ёмкость памяти 16ГБ
DDR3
Поддержка DDR3 1333/1066
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM
Модуль памяти с двухканальным режимом
DDR3
Поддержка DDR3 1333/1066
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM
Super I/O
ITE 8728
Обеспечивает наиболее используемые
действующие функциональные возможности
Super I/O.
Интерфейс с низким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Регулятор скорости вентилятора/ монитор
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
ITE 8728
Обеспечивает наиболее используемые
действующие функциональные возможности
Super I/O.
Интерфейс с низким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Регулятор скорости вентилятора/ монитор
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
SATA 2 & 3
Встроенное последовательное устройство
управления ATA
скорость передачи данных до 3.0 гигабит/с /
6.0 гигабит/с.
Соответствие спецификации SATA версия 2.0
/ 3.0.
Встроенное последовательное устройство
управления ATA
скорость передачи данных до 3.0 гигабит/с /
6.0 гигабит/с.
Соответствие спецификации SATA версия 2.0
/ 3.0.
память
Локальная
сеть
Звуковая
поддержка
жесткого
Realtek RTL8111E
Realtek RTL8111E
Автоматическое согласование 10 / 100 / 1000 Автоматическое согласование 10 / 100 / 1000
Мб/с
Мб/с
ALC892
Звуковая поддержка High-Definition
5.1канальный звуковой выход
ALC892
Звуковая поддержка High-Definition
5.1канальный звуковой выход
диска
USB3.0
NEC uPD720200 / Asmedia ASM1042
Слоты
Слот PCI
Слот PCI-E Gen2 x16 @ x16
Слот PCI-E Gen2 x16 @ x4
Слот PCI-E Gen2 x 1
52
x1
x1
x1
x1
Слот PCI
Слот PCI-E Gen2 x16 @ x16
Слот PCI-E Gen2 x16 @ x4
Слот PCI-E Gen2 x 1
x1
x1
x1
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
TH67B
Последовательный порт
Разъём SATA 3
x1
x2
Последовательный порт
Разъём SATA 3
x1
x2
Разъём SATA 2
Разъём на лицевой панели
x4
x1
Разъём SATA 2
Разъём на лицевой панели
x4
x1
Входной звуковой разъём
x1
Входной звуковой разъём
x1
Разъём вывода для S/PDIF
x1
Контактирующее приспособление
Встроенный вентилятора центрального процессора x1
Контактирующее приспособление
разъём
вентилятора системы
x2
Открытое контактирующее
приспособление CMOS
x1
Открытое контактирующее
приспособление CMOS
x1
USB 2.0-разъём
Разъём едока ИКЫЙ
x3
x1
USB 2.0-разъём
Разъём едока ИКЫЙ
x3
x1
Разъем питания (24 вывод)
x1
Разъем питания (8 вывод)
x1
Клавиатура / Мышь PS/2
x1
Порт HDMI
x1
Порт VGA
x1
Задняя
Порт DVI-D
x1
панель
Порт LAN
x1
средств
USB 2.0-порт (по H67)
x2
ввода-вывод USB 3.0-порт (по NEC uPD720200 /
Asmedia ASM1042)
x2
а
Гнездо для подключения
наушников
x3
Размер
панели
Поддержка
OS
Разъём вывода для S/PDIF
x1
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы
x2
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
Клавиатура / Мышь PS/2
Порт HDMI
Порт VGA
Порт DVI-D
Порт LAN
USB 2.0-порт
Гнездо для подключения
наушников
x1
x1
x1
x1
x1
x4
x3
230мм (Ш) X 244 мм (В)
230мм (Ш) X 244 мм (В)
Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять
или удалять средства обеспечения для OS с
или без предварительного уведомления.
Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять
или удалять средства обеспечения для OS с
или без предварительного уведомления.
53
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫‪TH67+ / TH67‬‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰﻳﺔ‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪Socket 1155‬‬
‫‪Socket 1155‬‬
‫ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪Intel Core i7 / i5 / i3/ Pentium‬ﻣﻌﺎﻟﺠﺎت‬
‫ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪Intel Core i7 / i5 / i3/ Pentium‬ﻣﻌﺎﻟﺠﺎت‬
‫‪Execute Disable Bit / Enhanced Intel‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت‬
‫‪Execute Disable Bit / Enhanced Intel‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت‬
‫‪SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended‬‬
‫‪Memory 64 Technology / Virtualization‬‬
‫‪Memory 64 Technology / Virtualization‬‬
‫‪Technology‬‬
‫‪Technology‬‬
‫‪Intel H67‬‬
‫‪Intel H67‬‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫‪Super I/O‬‬
‫‪TH67B‬‬
‫ﻋﺪد‪4‬‬
‫ﺳﻌﺔ ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ‪ DDR3‬ﺕﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﻣﻴﺠﺎ ﺑﺎﻳﺖ و‪ /1‬و‪ 512 /2‬ﺳﻌﺔ ‪ DDR3‬ﺕﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬‬
‫ﻣﻴﺠﺎ ﺑﺎﻳﺖ و‪ /1‬و‪ 512 /2‬ﺳﻌﺔ ‪ DDR3‬ﺕﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬‬
‫و‪4‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫و‪4‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 16‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 16‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﻣﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﺳﻌﺎت ‪ 1333/1066‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ‪DDR3‬ﺕﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬
‫ﺳﻌﺎت ‪ 1333/1066‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ‪DDR3‬ﺕﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥﻮع‬
‫‪ ECC‬وﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ ECC‬وﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻣﻊ ‪DIMM‬ﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ITE 8728‬‬
‫‪ITE 8728‬‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺕﻮﻓﺮ وﻇﻴﻔﺔ‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻣًﺎ‪Super I/O .‬ﺕﻮﻓﺮ وﻇﻴﻔﺔ‬
‫‪Low Pin Count Interface‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬
‫‪Low Pin Count Interface‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻣﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫ﻣﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪ ITE‬ﻣﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫‪SATA 2 & 3‬‬
‫ﺷﺒﻜﺔ داﺧﻠﻴﺔ‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫ﻣﺘﻜﺎﻣﻞ‪Serial ATA‬ﻣﺘﺤﻜﻢ‬
‫‪ /‬ﺛﺎﻧﻴ ﺔ‪/‬ﺟﻴﺠﺎﺏ ﺖ ‪ 3.0‬إﻟ ﻰ ﺕﺼ ﻞ ﺏﺴ ﺮﻋﺎت اﻟﺒﻴﺎﻧ‬
‫ﺎت لﻧ ﻖ‬
‫‪ /‬ﺛﺎﻧﻴ ﺔ‪/‬ﺟﻴﺠﺎﺏ ﺖ ‪ 3.0‬إﻟ ﻰ ﺕﺼ ﻞ ﺏﺴ ﺮﻋﺎت اﻟﺒﻴﺎﻧ‬
‫ﺛﺎﻧﻴ ﺔ‪/‬ﺟﻴﺠﺎﺏ ﺖ ‪6.0‬‬
‫ﺛﺎﻧﻴ ﺔ‪/‬ﺟﻴﺠﺎﺏ ﺖ ‪6.0‬‬
‫‪ 2.0 / 3.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪ 2.0 / 3.0.‬اﻹﺹﺪار ‪SATA‬ﻣﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪Realtek RTL8111E‬‬
‫‪Realtek RTL8111E‬‬
‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫‪ALC892‬‬
‫‪ALC892‬‬
‫ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻣﻦ‬
‫ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻣﻦ‬
‫اﻟﺘﻌﺮیﻒ‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫‪USB3.0‬‬
‫‪NEC uPD720200 / Asmedia ASM1042‬‬
‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬
‫اﻟﻔﺘﺤﺎت‬
‫ﻋﺪد‪4‬‬
‫ﺳﻌﺔ ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ‪ DDR3‬ﺕﺪﻋﻢ ذاآﺮة ﻣﻦ ﻥﻮع ‪DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺎت ﻧﻘ ﻞ‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ‪PCI-E Gen2 x16 @ x16‬‬
‫ﻋﺪد‪1‬‬
‫ﻓﺘﺤﺔ‪PCI-E Gen2 x16 @ x16‬‬
‫ﻋﺪد‪1‬‬
‫ﻓﺘﺤﺔ‪PCI-E Gen2 x16 @ x4‬‬
‫ﻋﺪد‪1‬‬
‫ﻓﺘﺤﺔ‪PCI-E Gen2 x16 @ x4‬‬
‫ﻋﺪد‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI-E Gen2 x 1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI-E Gen2 x 1‬‬
‫ﻋﺪد ‪1‬‬
‫‪54‬‬
‫‪TH6 7 +/ TH6 7 / TH6 7 B‬‬
‫‪TH67+ / TH67‬‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺱﻄﺢ‬
‫اﻟﻠﻮﺡﺔ‬
‫ﻣﻨﺎﻓﺬ دﺧﻞ‪/‬ﺧﺮج‬
‫اﻟﻠﻮﺡﺔ اﻟﺨﻠﻔﻴﺔ‬
‫‪TH67B‬‬
‫ﻣﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬
‫ﻋﺪد‪1‬‬
‫ﻣﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬
‫ﻋﺪد‪1‬‬
‫ﻣﻨﻔﺬ ‪SATA 3‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻨﻔﺬ ‪SATA 3‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻨﻔﺬ ‪SATA 2‬‬
‫ﻋﺪد ‪4‬‬
‫ﻣﻨﻔﺬ ‪SATA 2‬‬
‫ﻋﺪد ‪4‬‬
‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪2‬‬
‫وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪2‬‬
‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻣﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ‪USB 2.0‬‬
‫ﻋﺪد ‪3‬‬
‫ﻣﻨﻔﺬ ‪USB 2.0‬‬
‫ﻋﺪد ‪3‬‬
‫ﻣﻨﻔﺬ اﻷﺣﻤﺮ ﺕﺤ ﺖ ﻣﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ اﻷﺣﻤﺮ ﺕﺤ ﺖ ﻣﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪8‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻣﻔﺎﺕﻴﺢ ‪ /‬ﻣﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪HDMI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻣﻔﺎﺕﻴﺢ ‪ /‬ﻣﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪HDMI‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪DVI-D‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻣﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪DVI-D‬‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪ )USB2.0‬ﻗﺒ ﻞ ﻣﻦ ‪(H67‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻣﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻣﻨﺎﻓﺬ ‪2.0USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻣﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪3‬‬
‫ﻣﻨﺎﻓﺬ ‪/NEC uPD720200 USB3.0‬‬
‫ﺡﺠﻢ اﻟﻠﻮﺡﺔ‬
‫دﻋﻢ أﻧﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪55‬‬
‫) ﻗﺒ ﻞ ﻣﻦ ‪(Asmedia ASM1042‬‬
‫ﻋﺪد ‪2‬‬
‫ﻣﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪3‬‬
‫‪230‬ﻣﻢ )ﻋﺮض( ‪ 244 X‬ﻣﻢ )ارﺕﻔﺎع(‬
‫‪230‬ﻣﻢ )ﻋﺮض( ‪ 244 X‬ﻣﻢ )ارﺕﻔﺎع(‬
‫‪Windows XP / Vista / 7‬‬
‫‪Windows XP / Vista / 7‬‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺕﺸﻐﻴﻞ ﺏﺈﺧﻄﺎر ‪Biostar‬ﺕﺤﺘﻔﻆ‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺕﺸﻐﻴﻞ ﺏﺈﺧﻄﺎر ‪Biostar‬ﺕﺤﺘﻔﻆ‬
‫أو ﺏﺪون إﺧﻄﺎر‪.‬‬
‫أو ﺏﺪون إﺧﻄﺎر‪.‬‬
Motherboard Manual
JAPANESE
TH67+ / TH67
CPU
チップセット
TH67B
Socket 1155
Socket 1155
Intel Core i7 / i5 / i3/ Pentium プロセッサ
Intel Core i7 / i5 / i3/ Pentium プロセッサ
Execute Disable Bit / Enhanced Intel
Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended
Memory 64 Technology / Virtualization
Memory 64 Technology / Virtualization
Technologyをサポートします
Technologyをサポートします
Intel H67
Intel H67
DDR3 DIMMスロット x 4
DDR3 DIMMスロット x 4
各DIMMは 512MB / 1GB / 2GB / 4GB DDR3をサ 各DIMMは 512MB / 1GB / 2GB / 4GB DDR3をサ
メインメモリ
ポート
ポート
最大メモリ容量16GB
最大メモリ容量16GB
デュアル チャンネルモードDDR3メモリモジュール
デュアル チャンネルモードDDR3メモリモジュール
DDR3 1333/1066をサポート
DDR3 1333/1066をサポート
登録済みDIMMとECC DIMMはサポートされません
登録済みDIMMとECC DIMMはサポートされません
ITE 8728
ITE 8728
もっとも一般に使用されるレガシーSuper I/O機能を もっとも一般に使用されるレガシーSuper I/O機能を
Super I/O
SATA 2 & 3
LAN
HDオーディオ
のサポート
USB3.0
スロット
56
採用しています。
採用しています。
低ピンカウントインターフェイス
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
環境コントロールイニシアチブ、
H/Wモニター
H/Wモニター
ファン速度コントローラ/ モニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能
ITEの「スマートガーディアン」機能
統合シリアルATAコントローラ
統合シリアルATAコントローラ
最高3.0 Gb/秒 / 6.0 Gb/秒のデータ転送速度
最高3.0 Gb/秒 / 6.0 Gb/秒のデータ転送速度
SATAバージョン2.0 / 3.0仕様に準拠。
SATAバージョン2.0 / 3.0仕様に準拠。
Realtek RTL8111E
Realtek RTL8111E
10 / 100 / 1000 Mb/秒のオートネゴシエーション
10 / 100 / 1000 Mb/秒のオートネゴシエーション
ALC892
ALC892
ハイデフィニションオーディオのサポート
ハイデフィニションオーディオのサポート
5.1 チャンネルオーディオアウト
5.1 チャンネルオーディオアウト
NEC uPD720200 / Asmedia ASM1042
PCIスロット
x1
PCIスロット
x1
PCI-E Gen2 x16 @ x16スロット
x1
PCI-E Gen2 x16 @ x16スロット
x1
PCI-E Gen2 x16 @ x4スロット
x1
PCI-E Gen2 x16 @ x4スロット
x1
PCI Express Gen2 x 1スロット
x1
PCI Express Gen2 x 1スロット
x1
TH6 7 +/ TH6 7 / TH6 7 B
TH67+ / TH67
オンボードコ
ネクタ
TH67B
シリアルポート
x1
シリアルポート
x1
SATA 3コネクタ
x2
SATA 3コネクタ
x2
SATA 2コネクタ
x4
SATA 2コネクタ
x4
フロントパネルコネクタ
x1
フロントパネルコネクタ
x1
フロントオーディオコネクタ
x1
フロントオーディオコネクタ
x1
S/PDIFアウトコネクタ
x1
S/PDIFアウトコネクタ
x1
CPUファンヘッダ
x1
CPUファンヘッダ
x1
システムファンヘッダ
x2
システムファンヘッダ
x2
CMOSクリアヘッダ
x1
CMOSクリアヘッダ
x1
USB 2.0コネクタ
x3
USB 2.0コネクタ
x3
消費者IRコネクタ
x1
消費者IRコネクタ
x1
電源コネクタ(24ピン)
x1
電源コネクタ(24ピン)
x1
電源コネクタ(8ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード / マウス
x1
HDMIポート
x1
PS/2キーボード / マウス
x1
VGAポート
x1
HDMIポート
x1
DVI-Dポート
背面パネルI/O LANポート
USB 2.0ポート(で H67)
x1
VGAポート
x1
x1
DVI-Dポート
x1
x2
LANポート
x1
USB 3.0ポート(で NEC uPD720200 /
ボードサイズ
OSサポート
Asmedia ASM1042)
x2
オーディオジャック
x3
USB 2.0ポート
x4
オーディオジャック
x3
230mm (幅) X 244 mm (高さ)
230mm (幅) X 244 mm (高さ)
Windows XP / Vista / 7
Windows XP / Vista / 7
Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。
たは削除する権利を留保します。
2011/04/14
57
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement