Optical Power Meters

Optical Power Meters
Active Test
Equipment
www.greenwoodscomms.com
defining excellence in
global network solutions
Quality
defining excellence in global network solutions
The company supplies the major OEMs, network operators and mobile operators with a complete range of modular
services. This includes the supply of over 20,000 products, outsourcing of procurement and logistics, custom design,
manufacture, network installation and de-installation.
Greenwoods was founded in 1989 and as a direct result of continually satisfying our customers, the business has
continued to develop. Greenwoods Communications’ operations have expanded in both scope and depth, evolving in response
to the changing market. The company’s headquarters are based in Birmingham, UK and now employ 300 people.
Greenwoods Communications’ main market is the UK. However, business continues to grow across Europe, the US, the
Middle East and in the Far East. A large part of this is due to the company’s increasing range of multi-vendor
operational services, designed to meet the changing needs of our customers with the highest quality work.
Installation services cover a wide range of applications based around network operators’ switch and POP (Point-of-Presence)
sites. Often global telecom operators will use Greenwoods’ services in the UK or Europe and then request them elsewhere
in the world, ensuring consistency of work.
This brochure showcases the wide range of test equipment that have been carefully selected and
identified as the perfect product for the job requirements. Greenwoods Communications have developed
strategic relationships with suppliers such as, Martindale, Test-Um, Fujikura, Noyes, Megger and many
more to ensure that our customers get the best deal possible to enable them to do their job.
If the test equipment you required is not found in this catalogue please do not hesitate to contact our sales
department on +44(0)845 226 2327 or email [email protected]
More information about our products can also be found on http://ecatalogue.greenwoodscomms.com or email our
technical sales department on [email protected]
CONTENTS
Fibre Test Equipment
Fault Locators
Fibre Identifiers
4-11
4
5
Optical Power Meters
6-7
Optical Light Sources
8-9
Optical Time-Domain Reflectors
10
Test Kits
11
Electrical Test Equipment
12-29
All-in-one Testers
12-13
Clamp Meters
14-17
Continuity Testers
18
Insulation Testers
19
Loop Testers
20
Multimeters
21-23
PAT Testers
24
Phase Rotations
25
RCD Testers
26-27
Socket Testers
28-29
Voltage Indicators
30-38
Voice & Data Test Equipment
30
Cable Tracing Kits
31
Network Tracing Kits
32
Signal Tracing Kits
33
Test Telephones
34-35
Test & Certifiers
36
Tone Kits
37
Tone Probes
Tone Generators
Part Number Index
38
39-40
41
Fibre Testing | Fault Locators
Visible Fibre Checker
The Fibre Checker is a handy tool to check the breaks and faults of the fibre in the optical
network and FTTx construction. With a short visible 650nm wavelength red laser light
through a fibre-optic cable, the breaks or fault in the fibre will refract the light, creating a
bright red glow around the faulty or broken fibre area.
Features:
•
Robust & handy design
•
Dust-free cap to protect light diode
•
Continuous / Pulse Mode options
•
Emitting light diode 650nm visible red light
•
Auto Power Control circuit design to provide a stable light diode output power
•
Low Voltage Battery warning signal in LED
•
Universal 2.5mm ferrule to 1.25mm adaptor
•
Compatible to FC / LC / SC / ST connectors
•
Visibility to 3Km
Visible Fibre Checker
Description
Hand-Held Visible Fibre Checker
Pack
Quantity
Greenwoods
Part Number
Single
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
4
54SN6056
Fibre Identifiers | Fibre Testing
Optical Fibre Identifiers
The Fujikura FID-21R and FID-20R Optical Fibre Identifiers are handheld instruments for
detecting optical signals with no interruption to signal transmission.
Features:
•
Identification of traffic signal, CW light, modulated tone
•
Applicable for 0.25 and 0.9mm coated fibre, up to 3mm fibre cord,
up to 12 fibres ribbon
•
Light signal direction discriminated
•
Easy fibre clamping with long head style
•
Optical power meter function provided (FID-20R)
•
Battery Operation
Optical Fibre Identifiers
Description
Pack
Quantity
Greenwoods
Part Number
Fujikura, FID-20R optical fibre identifier with optical power function
Single
54FJ6270
Fujikura, FID-21R optical fibre identifier
Single
54FJ6271
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
5
Fibre Testing | Optical Power Meters
Optical Power Meters
An optical power meter is used to measure optical power in premises, telco or broadband
fibre optic networks. When used with an LED or light source, the optical power meter can
also measure the attenuation (insertion loss) of a multimode or singlemode cable.
Specifications:
Measurements:
H: 140mm x W: 81mm x D: 38mm
Weight:
0.26Kg
Power:
OPM1:
9V Battery
OPM4:
2 x AA Batteries
OPM5:
2 x AA Batteries or AC Adaptor
Adaptor Caps:
Please order separately (see page 7)
Operating Temperature:
-10oC to 50oC
Storage Temperature:
-30oC to 60oC
Optical Power Meters - OPM1
Description
Noyes OPM1-2C with protective rubber boot, 9V battery,
Wavelengths
(nm)
Detector
Type
Measurement
Range
Pack
Quantity
Greenwoods
Part Number
850, 1300, 1310, 1550
Geranium (Ge)
+6 to -70dBm
Single
54FJ6200
850, 1300, 1310, 1550,
InGaAs
+6 to 70dBm
Single
54FJ6201
manual & a carry case
Noyes OPM1-3C with protective rubber boot, 9V battery,
manual & a carry case
1625
*Adaptor caps must be purchased seperately
Optical Power Meters - OPM4
Description
Wavelengths
(nm)
Detector
Type
Measurement
Range
Pack
Quantity
Greenwoods
Part Number
Noyes OPM4-1D with protective rubber boot, AA batteries,
600, 780, 850
Silicon (Si)
+6 to -70dBm
Single
54FJ6202
850, 1300, 1310, 1550
Geranium (Ge)
+6 to -60dBm
Single
54FJ6203
850, 1300, 1310, 1550,
InGaAs
+6 to -70dBm
Single
54FJ6204
Filtered InGaAs
+6 to -70dBm
Single
54FJ6205
manual & a carry case
Noyes OPM4-2D with protective rubber boot, AA batteries,
manual & a carry case
Noyes OPM4-3D with protective rubber boot, AA batteries,
manual & a carry case
Noyes OPM4-4D with protective rubber boot, AA batteries,
manual & a carry case
1625
850, 980, 1310, 1490,
1550, 1625
*Adaptor caps must be purchased seperately
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
6
Optical Power Meters | Fibre Testing
Optical Power Meters - OPM5
Description
Noyes OPM5-2D with protective rubber boot, AA batteries,
Wavelengths
(nm)
Detector
Type
Measurement
Range
Pack
Quantity
Greenwoods
Part Number
850, 1300, 1310, 1550
Geranium (Ge)
+6 to -60dBm
Single
54FJ6206
850, 1300, 1310, 1550,
InGaAs
+6 to -70dBm
Single
54FJ6207
Filtered InGaAs
+26 to -50dBm
Single
54FJ6208
manual, USB cable, Windows compatible software
& a carry case
Noyes OPM5-3D with protective rubber boot, AA batteries,
manual, USB cable, Windows compatible software
1625
& a carry case
Noyes OPM5-4D with protective rubber boot, AA batteries,
manual, USB cable, Windows compatible software
850, 980, 1310, 1490,
1550, 1625
& a carry case
*Adaptor caps must be purchased seperately
Adaptor Caps
Description
Pack
Quantity
Greenwoods
Part Number
E2000 adaptor cap
Single
54FJ6226
FC adaptor cap
Single
54FJ6223
LC adaptor cap
Single
54FJ6227
MTRJ adaptor cap, A side only
Single
54FJ6228
MTRJ adaptor cap, A or B side
Single
54FJ6229
SC adaptor cap
Single
54FJ6224
ST adaptor cap
Single
54FJ6225
*other adaptor caps are available on request
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
7
Fibre Testing | Optical Light Sources
Optical Light Sources
There are two types of light source available an Optical LED Light Source and a Optical
Laser Light Source.
Both the optical LED light source and the optical laser light source are cost effective, rugged,
handheld instrument designed for performing insertion loss measurements on fibre optic
links when used with an optical power meter. The LED & Laser outputs are stabilized to
ensure accurate test results per TIA/EIA requirements
Specifications:
Measurements:
H: 140mm x W: 81mm x D: 38mm
Weight:
0.29Kg
Power:
OLS1 & OLS2:
9V Battery & Optional AC Adaptor
OLS1-Dual & OLS2-Dual:
2 x AA Batteries
OLS4:
2 x AA Batteries or AC Adaptor
Adaptor Caps:
Please Order Separately (see page 7)
Operating Temperature:
-10oC to 50oC
Storage Temperature:
-30oC to 60oC
Optical Light Source - OLS1
Description
Wavelength
Output (nm)
Noyes OLS1-1C with protective rubber boot, 9V battery,
660 - Red
50 & 62.5µm mandrels, manual & a carry case
Noyes OLS1-2C with protective rubber boot, 9V battery,
850 + 35/-40
50 & 62.5µm mandrels, manual & a carry case
Noyes OLS1-Dual with protective rubber boot, AA batteries,
50 & 62.5µm mandrels, manual & a carry case
Fibre
Size
Connector
Output
Pack
Quantity
Single
54FJ6210
Single
54FJ6211
Single
54FJ6212
1000µm
2 x ST
850 + 35/-40
62.5µm
62.5µm
2 x ST
Greenwoods
Part Number
1300 +50/-10
850 +30
62.5µm
1300 +50/-10
1 x SC,
FC or ST
* please specify FC, SC or ST output at the time of purchase
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
8
Optical Light Sources | Fibre Testing
Optical Light Source - OLS2
Description
Noyes OLS2-1310 with protective rubber boot, 9V battery,
Wavelength
Output (nm)
Laser
Classification
1310 +20
FDA 21, CFR1040.10 & 11
manual & a carry case
Noyes OLS2-1550 with protective rubber boot, 9V battery,
1550 +20
FDA 21, CFR1040.10 & 11
manual & a carry case
Noyes OLS2-1625 with protective rubber boot, 9V battery,
1625 +25
FDA 21, CFR1040.10 & 11
1310 +20
AA batteries, manual & a carry case
Noyes double port OLS2-CL with protective rubber boot,
1550 +20
AA batteries, manual & a carry case
Pack
Quantity
FC, SC,
Single
& IEC 60825-1
or ST
FC, SC,
Single
& IEC 60825-1
or ST
FC, SC,
Single
& IEC 60825-1
or ST
FDA 21, CFR1040.10 & 11
FC, SC,
Single
1550 +20
& IEC 60825-1
or ST
FDA 21, CFR1040.10 & 11
FC, SC,
Single
1625 +25
& IEC 60825-1
or ST
manual & a carry case
Noyes single port OLS2-Dual with protective rubber boot,
Connector
Output
Greenwoods
Part Number
54FJ6213
54FJ6214
54FJ6215
54FJ6216
54FJ6217
* please specify FC, SC or ST output at the time of purchase
Integrated Laser & LED Source - OLS4
Description
Noyes OLS4 with protective rubber boot,
AA batteries, mandrels, manual
Wavelength (nm)
Emitter Type
Connector
Output
Pack
Quantity
850 +30 & 1300 -10/+50 (MM Port)
LED, IEC60825-1 (MM Port)
FC, SC,
Single
1310 +20 & 1550 +30 (SM Port)
Laser FDA 21, CFR1040.10 & 11
or ST
& IEC 60825-1
(SM Port)
& a carry case
Greenwoods
Part Number
54FJ6218
* please specify FC, SC or ST output at the time of purchase
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
9
Fibre Testing | OTDRs
OTDRs
The Noyes M200 offers unmatched OTDR in a handheld package weighing less than 1Kg.
Multimode, Singlemode and Quad wavelength models are offered. With short dead zone and
intermediate range specifications, the M200 is ideal for tier 2 testing of premises (building
and campus) networks or certification and troubleshooting of FTTX PON networks. Its bright
transflective display makes it suitable for both indoor and outdoor operation.
The M200 is based on a new hardware / software platform that supports automatic and
manual setup, precision event analysis, dual-wavelength testing, fibre identification using
test receivers, rich file naming and folder setup, 6 hour battery life, internal and removable
media data storage and USB connectivity. Test ports are equipped with tool free adaptors,
which can be changed in seconds.
Features:
•
Handheld, 0.9Kg
•
850nm, 1300nm, 1310nm, 1550nm
•
1.5 m (typical) event dead zone
•
22dB (MM), 26dB (SM) dynamic range
•
Integrated VFL (650nm)
•
Tool-free, switchable adaptors (ST, SC, FC)
•
Bellcoe (GR-196) *.SOR file format
•
Compact Flash memory card
•
Tool-free Li-Lon battery (6 hour life)
•
Transflective (indoor / outdoor) touch-screen display
•
Complete with PC software
OTDR
Description
Noyes M200-K-Quad with AC adaptor, 2 x SC & ST adaptors & 1 x FC adaptor,
Multimode
(nm)
Singlemode
(nm)
Pack
Quantity
Greenwoods
Part Number
850nm, 1300nm
1310nm, 1550nm
Single
54FJ6220
850nm, 1300nm
-
Single
54FJ6221
-
1310nm, 1550nm
Single
54FJ6222
manual, USB cable & carry case
Noyes M200-K-MM with AC adaptor, 1 x SC & ST adaptor, manual, USB cable
& carry case
Noyes M200-K-SM with AC adaptor, 1 x SC & FC adaptor, manual, USB cable
& carry case
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected].com
10
Test Kits | Fibre Testing
Fibre Loss Test Kits
Description
Pack
Quantity
Noyes MLP1-1 fibre optic loss test kit including 1 x OLS1-1C optical light source,
Greenwoods
Part Number
Single
54FJ6250
Single
54FJ6251
1 x OPM1-2C optical power meter, protective rubber boots, ST adapter cap,
50 & 62.5µm mandrels, user guide and carry case
Noyes MLP1-2 fibre optic loss test kit including 1 x OLS1-2C optical light source,
1 x OPM1-2C optical power meter, protective rubber boots, ST adaptor cap,
MLP1-1s fibre optic
50 & 62.5µm mandrels, user guide and carry case
loss test kit
Fibre Multimode Test Kits
Description
Pack
Quantity
Noyes MLP4-2 multimode test kit including 1 x OLS1-Dual (single port) optical light source,
Greenwoods
Part Number
Single
54FJ6252
Single
54FJ6253
1 x OPM4-2D optical power meter, AA bateries, protective rubber boots, SC adaptor cap,
50 & 62.5µm mandrels, user guide and carry case
Noyes MLP5-2 multimode test kit including 1 x OLS1-Dual (single port) optical light source,
1 x OPM5-2D optical power meter, AA batteries, protective rubber boots, SC adaptor cap,
MLP4-2 multimode
test kit
50 & 62.5µm mandrels, USB cable, Windows compatible software, user guide and carry case
* Other adaptor caps are available on request
Fibre Singlemode Test Kits
Description
Pack
Quantity
Noyes SLP4-6D singlemode test kit including 1 x OLS2-Dual (single port) optical light source,
Single
Greenwoods
Part Number
54FJ6256
1 x OPM4-4D optical power meter, AA batteries, protective rubber boots, SC adaptor cap,
user guide and carry case
SLP4-6D singlemode
test kit
* Other adaptor caps are available on request
Fibre Multimode / Singlemode Test Kits
Description
Pack
Quantity
Noyes SMLP4-4 singlemode / multimode test kit including 1 x OLS4 optical light source,
Greenwoods
Part Number
Single
54FJ6254
Single
54FJ6255
1 x OPM4-2D optical power meter, AA batteries, protective rubber boots, SC adaptor cap,
50 & 62.5µm mandrels, user guide and carry case
Noyes SMLP5-5 singlemode / multimode test kit including 1 x OLS4 optical light source,
SMLP4-4 singlemode
& multimode test kit
1 x OPM5-2D optical power meter, AA batteries, protective rubber boots, SC adaptor cap,
USB cable, Windows compatible software, 50 & 62.5µm mandrels, user guide and carry case
* Other adaptor caps are available on request
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
11
Electrical Testing | In-One Testers
All In-One Tester
The Martindale VR2240 All In-One Tester incorporates continuity, insulation resistance,
RCD, earth loop impedance, earth resistance and phase rotation tests.
The Veritest also has the ability to commit test results to its internal memory and is equipped
to download to a P.C. via optional software and accessories. Up to 350 different test results
can be stored and up to 99 locations.
Features:
•
Continuity test with test lead null feature and timer
•
Manual, auto and timed insulation tests at voltages of 250V, 500V and 1000V
•
Manual and automatic RCD testing of general, time delayed and DC sensitive RCDs at
x½, x1, x2 and x5
•
P-P, P-N, and P-PE loop test with PSC
•
Non-trip Earth loop test with PSC
•
Phase rotation test
•
Auto power off
Specifications:
Insulation Ranges:
0.05MΩ to 1999MΩ at voltages between 50VDC, 100VDC, 250VDC, 500VDC, 1000VDC
Continuity Ranges:
0.01Ω - 19.99Ω (0.01Ω res), 20.0Ω - 99.9Ω (0.1Ω res)
Earth Loop Ranges:
0.03Ω - 19.99Ω (0.01Ω res), 20.0Ω - 99.9Ω (0.1Ω res), 20.0Ω - 99.9Ω (1Ω res)
RCD Ranges:
10mA, 30mA, 100mA, 300mA, 500mA
with a resolution of 0.01MΩ, 0.1MΩ and 1MΩ
Phase Rotation Test:
Graphic display of phase sequence
Display Features:
LCD custom
Working Temperatures:
-10oC to +50oC
Live Circuit Warning:
Yes
Insulation:
Class 2, double insulation
Low Battery Indication:
Yes
Dimensions:
222mm x 162mm x 57mm
Weight:
1000gm
Memory:
350 Slots for saved tests
All-In-One Tester
Description
Martindale VR2240SC All-In-One Tester with Case, Manual & Test Leads
Pack
Quantity
Greenwoods
Part Number
Single
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
12
95ZZ0023
In-One Testers | Electrical Testing
All In-One Tester
The Megger MFT1552 is an automatic RCD combined electrical circuit tester. The meter has
being field tested in almost every environment available is considered one of the most
rugged on the market. Ideal for testing electrical installations compliant to BS7671 (16th
Edition wiring regulations) & BS7671:2008 (17th Edition wiring regulations) and European
EN61557 standards.
Features:
•
Automatic RCD testing
•
Easy to use
•
3-phase safe
•
Continuity measurement up to 99.9kΩ
•
Insulation testing at up 1,000V
•
Standard, selective and DC-sensitive RCD testing
•
RCD ramp testing
•
Non-tripping and high-current loop tests
•
Three-phase loop tests
•
PSC current measurement
Specifications:
Insulation Ranges:
250V, 500V & 1000V
Continuity Features:
200mA continuiy, Lead resistance zeroing & a buzzer
Loop Testing:
Loop test maximum range of 3000Ω, high current loop, P-N, P-E & P-P loop test, low current 15mA non-trip,
RCD Testing:
Selectable RCD current test, RCD ramp test. auto RCD testing, DC sensitive RCDs, 0o + 180o phase angle
PSCC indicator
Touch Voltage:
25V / 50V, Display
Display:
Auto shut down, large LCD display, Megger analogue arc, backlight
Intelligent Safety System:
Test lockout, safe contact detector, default voltmeter
Voltage Range:
500V, switched probe facility
All-In-One Tester
Description
Pack
Quantity
Megger MFT1552 Multi Function Tester
Single
Greenwoods
Part Number
TMEG0010
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
13
Electrical Testing | Clamp Meters
Clamp Meters
The Martindale CM58 True RMS 1000A AC/DC Clamp Meter features true RMS AC voltage
and current measurement. This clamp meter measures AC and DC current to 1000A, has
voltage, resistance, frequency and capacitance functions and is autoranging (except
voltage).
The bargraph has 42 segments for better resolution of changing readings. The CM58 has
Max and Min reading memories, AC Peak and Hold features and Diode test. Manual range
change/hold is provided for optional override of the autoranging functions.
Specifications:
Display:
AC V:
Accuracy:
AC A:
Accuracy:
3½ digit LCD bargraph
100µV to 750V, autoranging (50Hz to 500Hz) (5 ranges)
± (1.5% rdg + 4 dgts)
100mA to 1000A, (2 ranges) (true RMS, 50Hz to 400Hz)
0-600A ± (1.5% rdg + 5 dgts)
>600A ± (2% rdg + 5 dgts)
DC V:
100µV to 1000V, autoranging (50Hz to 500Hz)
(5 ranges)
Accuracy:
DC A:
Accuracy:
± (0.5% rdg + 1 dgts)
100mA to 1000A, (2 ranges)
0-600A ± (1.5% rdg + 5 dgts)
600-800A ± (2.5% rdg + 5 dgts)
>800A ± (3.5% rdg + 5 dgts)
Ohms:
100mΩ to 40MΩ (6 ranges)
Capacitance:
1µF to 40µF, autoranging (5 ranges)
Frequency:
0.1Hz to 400kHz
Continuity:
Buzz at <40Ω
Max Conductor:
57mm Ø or 70 x 18mm bus bar
Dimensions:
277mm x 102mm x 49mm
Weight:
540g
Clamp Meter
Description
Martindale CM58 True RMS 1000A AC/DC Clamp Meter with Leads, Case,
Pack
Quantity
Greenwoods
Part Number
Single
Battery & Manual
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
14
95ZZ0026
Clamp Meters | Electrical Testing
Clamp Meters
The Megger MMC850 Multi-Core Clamp Meter is perfect for use anywhere you want to
measure current without breaking a circuit or splitting cables. The MMC850 can also be used
in place of traditional clamp meters, when commissioning, or for general maintenance work
in electrical machinery and installations.
Features:
•
Single, two or three core cable measurement
•
Flat or round section cables
•
No need to split wires
•
AC Current upto 200A, 0.1A Resolution.
•
Cable centralising clamp
•
Backlit display
•
50Hz and 60Hz supplies
•
IEC 1010-2-032, CAT III 600 V safety protection
Specifications:
Current Ranges:
100A Multi-Core
Display:
3½ digit display and backlight
Core Cable:
Single & Multi-Core
Operation:
Holds Data
Max Conductor Size:
13mm
Clamp Meter
Description
Pack
Quantity
Megger MMC850 Multi-Core Clamp Meter
Single
Greenwoods
Part Number
TMEG0040
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
15
Electrical Testing | Clamp Meters
Clamp Meters
The Fluke 322 is designed to verify the presence of load current, AC voltage and continuity
of circuits, switches, fuses and contacts. The small and rugged clamp meter is ideally suited
for current measurements up to 400 A in tight cable compartments. The Fluke 322 also offers
DC voltage measurements and has a higher resolution for loads below 40 A.
Features:
•
AC Volts, DC Volts, AC Amps, Resistance and Continuity
•
Precise low current measurements with better than 2% basic accuracy
•
Safety rating: IEC 1010-2-031, 600 V CAT III
•
Controls positioned for one-hand operation
•
Auto shut-off
•
Display hold
Specifications:
AC Current:
40A - 400A
AC Voltage:
400V - 600V
Continuity:
≤30Ω
DC Voltage:
400V - 600V
Resistance:
400Ω
Operating Temperature:
-10oC to +50oC
Altitude:
2,000 mtrs
Battery Life:
100 hours continuous with automatic low battery
indicator
Dimensions:
190.5mm x 63.5mm x 35.0mm
Weight:
224g
Clamp Meter
Description
Fluke 322 Clamp Meter with Test Leads, Batteries & Soft Carry Case
Pack
Quantity
Greenwoods
Part Number
Single
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
16
95ZZ0011
Clamp Meters | Electrical Testing
Clamp Meters
The Fluke 337 TRMS AC/DC Clamp Meter provides you with the ability to work quickly and
easily in narrow and dark locations, and makes it possible to keep track of your
measurements for further analysis. The Fluke 337 Clamp Meter offers a design that is
compact and lightweight, and functionality that allows you to take measurements that are
more precise and features a large display that is backlit so readings can be taken in virtually
any lighting situation. Auto-shut-off maximizes battery life so the meter works when you need
it.
Features:
•
Small body and jaws fit perfectly in your hand and into tight places
•
Handy 'Display Hold' button keeps measurements on the display
•
Meter controls are positioned so current measurements can be done with one hand
•
Large, backlit display is easy-to-see in less than ideal conditions
•
In-rush current function for measuring starting current for motors, lighting, etc.
•
Auto shut-off maximizes battery life so the meter works when you need it
•
Improved low current measurement accuracy from new microprocessor technology
•
Large jaw measures ac/dc current and voltage, ohm, frequency,
•
MIN/MAX capability
Specifications:
AC Current:
999.9A
AC Voltage:
600V
Continuity:
≤30Ω
DC Voltage:
600V
Resistance:
6000Ω
Inrush:
100 mS
Lighting:
Backlight
Non Linear Loads:
True-RMS
DC Current:
999.9A
Variable Speed Drives:
400Hz
Operating Temperature:
-10oC to +50oC
Altitude:
2,500 mtrs
Battery Life:
150 hours continuous & automatic low battery indicator
Clamp Meter
Description
Pack
Quantity
Fluke 337 Clamp Meter with Test Leads, Batteries & Soft Carry Case
Single
Greenwoods
Part Number
95ZZ0130
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
17
Electrical Testing | Continuity Testers
Continuity Testers
The Martindale TEK402 and TEK404 are economical and easy to use continuity testers with
audible indication (TEK402) and visual indication with overvoltage protection (TEK404). The
loud buzzer makes it easy to use in noisy environments and gives a very clear signal of
continuity.
Its simplicity and tough construction gives fast and simple continuity testing and is suitable
for a wide variety of low voltage signalling, process control and educational applications.
Specifications:
Probe:
9V
Test Current:
5mA
Resolution Range:
0 - 170kΩ audible
0 - 8kΩ visual (TEK404)
Output:
85dB minimum at 30cm, zero resistance
Red LED Illuminates:
Below 8kΩ (TEK404)
Audible Frequency:
2.8kHz ± 0.1kHz
Supply:
9V, MN1604/PP3 Alkaline Battery
Dimensions:
150mm x 64mm x 30mm
Weight:
185g
Continuity Testers
Description
Pack
Quantity
Greenwoods
Part Number
Martindale TEK402 Continuity Bleep Tester with Fused Leads with Crocodile Clips
Single
95ZZ0010
Martindale TEK404 Continuity Bleep & Visual Tester with Fused Leads with Crocodile Clips
Single
95ZZ0022
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
18
Insulation Testers | Electrical Testing
Insulation Testers
The Martindale IN2102 Insulation Tester gives a high quality, accurate testing at an
economically friendly rate. These meters comply fully with all UK and international standards
and feature a large backlit digital display with an analogue bargraph.
The output test voltage is automatically displayed during testing and guarantees a minimum
test voltage of 250V, 500V and 1000V really being applied during the test. Automatic zero
adjust removes the resistance of the leads and the test button can be set to be either
latching, to give a permanent output or ‘press to test’.
Manufactured from tough ABS the IN2102 offers high levels of durability whilst maintaining
user comfort with its unique stylish design, making it ideal for one-handed operation. The
large display is easy to read and incorporates digital and analogue indicators to meet all user
preferences.
Specifications:
Insulation Tests:
250V = 4/40/400/1000MΩ, 500V = 4/40/400/4000MΩ,
Range:
0.200MΩ to 500MΩ
Short Circuit Current:
<1.5mA
1000V = 4/40/400/5000MΩ,
Accuracy:
± (3% rdgs + 5 digits)
Auto Discharge:
Yes
Buzzer Disable Option:
Yes
Continuity:
Range:
0.01Ω to 40.00Ω
Resolution:
0.01Ω
Short Circuit Current:
>200mA
Accuracy:
± (3% rdgs + 5 digits)
Auto Discharge:
Yes
Resistance:
0.1Ω - 1, 999kΩ
Open Voltage:
3V
Accuracy:
± (3% rdgs + 5 digits)
Dimensions:
90mm x 210mm x 54mm
Continuity Testers
Description
Pack
Quantity
Martindale IN2102 Insulation Tester with Batteries, Manualm Carry Case & Test Leads
Single
Greenwoods
Part Number
95ZZ0024
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
19
Electrical Testing | Loop Testers
Loop Testers
The Martindale LP2000 is a fast and accurate autoranging loop tester. This loop tester can
carry out phase earth and phase neutral testing and automatically displays PSCC readings.
A wander lead for testing bonded metalwork is also supplied.
Specifications:
Supply Voltage:
200 to 260V rms, 50/60Hz
Test Current:
24A, rms, for two half cycles at 240V
Loop Range:
0 to 15Ω nominal in steps of 0.01Ω
Accuracy:
±2% of reading, ±2 digit
Temperature Coefficient:
±0.1% / oC
Ipsc Range:
0 to 19.99kA in steps of 0.01kA
15 to 199.9Ω in steps of 0.1Ω
Fuse:
5A, HBC, Anti-Surge ceramic DIN 5 x 20mm
Transient Protection:
VDR at input
Thermal Protection:
Electronic delay
Overvoltage:
Category III
Houseing:
ABS
Dimensions:
190mm x 90mm x 54mm
Weight:
400gms
Loop Testers
Description
Martindale LP2000 Loop Tester with a Soft Protective Case, Batteries,
Pack
Quantity
Greenwoods
Part Number
Single
Mains Test Lead (TL205), Green Wander Lead (TL61) & Manual
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
20
95ZZ0140
Multimeters | Electrical Testing
Multimeter
The Martindale MM45 is a high specification autoranging multimeter that is fast, safe and
simple to use. The range hold and change buttons give the option of full measurement
control.
The addition of a bargraph assists with varying signals. A clear digital display gives sharp
accurate results.
Specifications:
Display:
3½ digit display with automatic polarity and zero
AC V:
100µV to 600V (5 ranges) (50/60Hz)
AC A:
0.1µA to 10A (5 ranges) (50/60Hz)
DC V:
100µV to 600V (5 ranges)
DC A:
0.1µA to 10A (5 ranges)
Ohms:
100mΩ to 32MΩ
Continuity Buzz:
at <20Ω
Diode Test & Auto Power
Down Overvoltage:
600V CAT III
Dimensions:
147mm x 70mm x 39mm
Weight:
345g
Multimeter
Description
Pack
Quantity
Martindale MM45 Autoranging Multimeter with Leads, Battery (TL16),
Single
Greenwoods
Part Number
95ZZ0150
Manual & Protective Holster
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
21
Electrical Testing | Multimeters
80 Series Multimeters
The Fluke 80 Series digital multimeters are designed with accuracy and diagnostic functions
for maximum industrial productivity. This multimeter now has improved measurement
functions, troubleshooting features resolution and accuracy to solve more problems on motor
drives in plant automation, power distribution and electro-mechanical equipment.
Features:
•
6000 counts, 3-3/4 digits
•
Measure up to 1000 V ac and dc
•
Measure up to 10 A, 20 A for up to 30 seconds
•
Frequency to 200 kHz and % duty cycle
•
Resistance, continuity and diode test
•
10,000 µF capacitance range for components and motor caps
•
Min/Max-Average recording with Min/Max Alert to capture variations automatically
•
Peak capture to record transients as fast as 250 µs
•
Relative mode to remove test lead interference from low ohms measurements
•
Auto and manual ranging for maximum flexibility
•
Touch Hold to capture stable readings avoiding noisy signals
•
Large display digits and two-level bright white backlight for increased visibility
•
Analog bargraph for fast changing or unstable signals
•
Input Alert provides audible warning against wrong use of input jacks
•
Improved selectable sleep mode for long battery life
•
Access door for fast battery changes without breaking the calibration seal
•
"Classic" design with new removable holster with built in test lead and probe storage
Specifications:
DC Maximum Voltage:
1000V
AC Maximum Voltage:
1000V
AC Bandwidth:
Fluke 83 V: 5kHz / Fluke 87 V: 20kHz (with low pass
Maximum Resistance:
50 MΩ
Maximum Capacitance
9,999 µF
Maximum Frequency
200 kHz
Maximum Duty Cycle
99.9%
filter; 3db @ 1kHz)
Multimeter
Description
Fluke 83V Multimeter with Test Leads (TL75) Test Leads, Alligator Clips (AC72),
Pack
Quantity
Greenwoods
Part Number
Single
95ZZ0018
Single
95ZZ0007
Holster, 9V Battery & Manual
Fluke 87V Multimeter with Test Leads (TL75) Test Leads, Alligator Clips (AC72),
Holster, 9V Battery, Manual & 80BK Temperature Probe
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
22
Multimeters | Electrical Testing
170 Series Multimeters
The Fluke 170 Series Digital Multimeters offer True RMS AC voltage and current readings,
6000 count resolution, min/max average recording, as well as frequency and capacitance
ranges. Despite all these and many other features the 170 series remains easy to use.
Features:
•
True RMS voltage and current measurements
•
0.09% basic accuracy (177, 179)
•
6000 count resolution
•
Digital display with analog bargraph and backlight (177, 179)
•
Manual and automatic ranging
•
Display Hold and Auto Hold
•
Frequency and capacitance measurements
•
Resistance, continuity and diode measurements
•
Temperature measurements (179)
•
Min-max-average recording
•
Smoothing mode allows filtering of rapidly changing inputs
•
Easy battery exchange without opening the case
•
Closed case calibration through front panel
•
Ergonomic case with integrated protective holster
•
EN61010-1 CAT III 1000V / CAT IV 600V
•
Measures twice as fast as other multimeters
Specifications:
Voltage DC:
175 - Accuracy ± (0.15%+2)
177 - Accuracy ± (0.09%+2)
179 - Accuracy ± (0.09%+2)
AC Maximum
1000 V
DC Current Maximum
10 A
Resistance Maximum
50 MΩ
Capacitance Maximum
10,000 µF
Frequency Maximum
100 kHz
Multimeter
Description
Pack
Quantity
Greenwoods
Part Number
Fluke 175 Digital Multimeter
Single
95ZZ0008
Fluke 177 Digital Multimeter
Single
95ZZ0019
Fluke 179 Digital Multimeter
Single
95ZZ0155
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
23
Electrical Testing | PAT Testers
Hand-held PAT Tester
The HPAT600 is a battery powered portable appliance which features;
Dual insulation test voltage - set at either 500V or 250V
User selectable pass levels - pass levels can be defined by the user
Easy & fast operating modes - The HPAT600 can be operated in either of two modes. In
manual mode, aimed at the newcomer to PAT testing, a connection diagram for the selected
test type is shown on the display. Each step of a test requires user confirmation by a press
of a button. In the Auto mode, for the experienced operator the HPAT600 will automatically
run through a selected test sequence without any further interaction unless a failure is
encountered.
IEC lead test - The HPAT600 can also be used to check IEC leads for earth continuity,
insulation and polarity.
Test data memory storage - The HPAT600 is able to store test data for up to 200 appliances
into the memory.
•
Lead Test
•
Class I & II Test
•
Simulated Load Test
•
Rechargeable Batteries
•
User Settable Pass Levels
•
Insulation Test at 250V or 500V
•
Storage for 200 Tests
•
Complies with the NEW IEE Codes of Practice
PAT Testers
Description
Martindale HPAT600 PAT Tester Supplied with Both Mains & Car Chargers, Manual
Pack
Quantity
Greenwoods
Part Number
Single
& Rechargeable Batteries
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
24
95ZZ0170
Phase Rotations | Electrical Testing
Phase Rotation & Continuity Indicator
The phase rotation and continuity indicator will quickly and simply prove continuity of all three
lines, (or identify which are faulty) and shows the sequence of phase rotation. It gives a fast,
effective method of identifying worn or unmarked cables and ensures 3-phase outlets and
machines are wired correctly.
The retraceable GS38 probe shields give a choice between long exposed tips for reaching
inaccessible contacts and safer, shorter lengths for increased safety.
•
Proves continuity
•
Identifies faulty lines
•
Shows direction of phase rotation
Specifications:
For use on systems from 100V to 600V phase to phase, 40Hz to 60Hz
Operating temperature:
-20oC to 50oC
Overvoltage:
CAT III/600V
Dimensions:
230mm x 140mm x 80mm
Weight:
354g
Phase Rotation & Continuity Indicators
Description
Pack
Quantity
Martindale PC15250 Phase Rotation & Continuity Indicator with One Fused Crocodile
Single
Greenwoods
Part Number
95ZZ0020
Clip & Two Fused Prods with Retractable Shrouds
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
25
Electrical Testing | RCD Testers
RCD Testers
The Martindale RC2000 Residual Current Device Tester is a fast and easy to use and
suitable for testing all common RCDs up to 500mA. The RCD rating (I∆N) is set using the
convenient centrally located rotary switch. Three different currents (full, half and fast test) are
available on one selector switch, and 0o or 180o (positive / negative half cycle) can be set on
he second selector switch.
The 6mA range gives this unit wider application than many rivals.
Specifications:
Supply Voltage:
240VAC, 50/60Hz
RCD Ratings (I∆N):
6mA, 10mA 30mA, 100mA, 300mA and 500mA
Half Trip Settings (½x1∆N):
3mA, 5mA, 15mA, 50mA, 150mA and 250mA
Fast Trip Settings:
150mA (for 1∆N=6, 10 and 30mA only)
Accuracy:
± 3% at 240VAC Supply Voltage
Test Polarity:
0o and 180o
Timing Range:
0 - 1999mSec (resolution of 1mSec)
Rising Lineraly to ± 9% at ± 6% of 240V Supply Voltage
Timing Accuracy:
± 2% of reading ± 1 digit
Housing:
ABS
Dimensions:
190mm x 90mm x 54mm
Weight:
350gms
Multimeter
Description
Martindale RC2000 RCD Tester with Soft Protective Carry Case, Batteries, Mains
Pack
Quantity
Greenwoods
Part Number
Single
Test Lead (TL205) & Manual
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
26
95ZZ0160
Socket Testers | Electrical Testing
Socket Tester
The Martindale CP501 Classic Check Plug is a fast and easy way to ensure that 13A sockets
are wired correctly, indicated by all three neons illuminating.
Wiring errors are indicated by one or more neons failing to light, with the pattern of lit neons
indicating the type of fault. this failsafe system means that any neon not lit indicates a
problem.
The unit has a virtually indestructible, flame retardant ABS case with a sculpted shape for
easy removal. The plug induces less han 5mA of earth leakage, well below RCD trip
thresholds.
As with all socket testers the plug only verifies the presence of and earth, it does not assess
the quality.
Specifications:
Mains Supply:
200 - 250V (30 - 70Hz)
Power Consumption:
<1.2W
Temperature Range:
-10oC to 40oC 60% RH (max)
Earth Leakage:
<5mA
Overvoltage:
CAT II / 300V
Housing:
Flame Retardant ABS
Dimensions:
65mm x 65mm x 47mm
Classic Check Plug
Description
Pack
Quantity
Martindale CP501 Classic Check Plug
Single
Greenwoods
Part Number
95ZZ0165
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
27
Electrical Testing | Socket Testers
Socket Tester
The Martindale BZ101 Buzz-It Check Plug with Sounder is a fast and easy way to ensure
13A sockets are wired correctly in the same way as the classic check plug above. The Buzz
It gives and audible signal in addition to the three neons lighting when the wiring is correct.
The allows for awkwardly placed, or not easily visible, sockets to be checked quickly.
It can also be used as a basic fuse finder - when the correct fuse is pulled the buzzer stops.
Specifications:
Mains Supply:
200 - 250V (30 - 70Hz)
Power Consumption:
<1.5W
Temperature Range:
-10oC to 40oC at 60% RH (max)
Earth Leakage:
<5mA
Overvoltage:
CAT II / 300V
Housing:
Flame Retardant ABS
Dimensions:
65mm x 65mm x 47mm
Classic Check Plug
Description
Martindale BZ101 Buzz-IT Classic Check Plug with Sounder
Pack
Quantity
Greenwoods
Part Number
Single
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
28
95ZZ0166
Voltage Indicators | Electrical Testing
Safety Voltage Indicator
Before doing any electrical work it is essential to be absolutely certain the circuit is dead. this
GS38 compliant voltage indicator rapidly and safely checks for AC and DC voltages from 50V
to 600V. The bright, long life neon indicators give clear and immediate display of the voltage
level range.
The tough moulded case construction combined with heavy duty, double insulated leads
which terminate in a lockable and retractable prod sheath and a substantial finger guard,
make this a very reliable and safe instrument.
The return lead incorporates an HRC fuse which, together with the retractable test prods,
ensures that the unit fully meets all the GS38, M15/4, HSE and EN61010 recommendations.
Widely specified by training organisations, utilities and large contractors.
Specifications:
AC:
0 - 49V none lit
50 - 99V one lit
100 - 199V two lit
200 - 399V three lit
400V + all lit
DC:
0 - 74V none lit
75 - 149V one lit
150 - 239V two lit
240 - 559V three lit
560V + all lit
Operating Temperature:
-20oC to 50oC
Overvoltage:
CAT III / 600V
Safety Voltage Indicator
Description
Pack
Quantity
Martindale VI13700G Safety Voltage Indicator
Single
Greenwoods
Part Number
95ZZ0014
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
29
Electrical Testing | Voltage Indicator
Non-Contact Voltage Indicator
The Martindale TEK200 Non-Contact Voltage and Magnetic Indicator detects the presence
and polarity of magnetic fields produced by indicators, relays, solenoids and transformers.
The integral self-test activates the sensor in the tip of the tester at 50Hz as well as checking
the battery and LED. This proves that the unit is fully functional and avoids the need for a
separate proving unit.
Specifications:
Voltage Range:
100 - 600V, 50Hz to 50kHz
Sensitivity:
Registers at 3mm for 100V, 50Hz, 23mm for 240V, 50Hz
(distances are from the tip of the unit to a flat PVC twin
core and earth cable suspended in free space)
Visual Indication:
Red LED
Audible Indication:
2kHz tone
Battery Indication:
Green LED Goes Out
Magnetic Field Range:
±10mT, 0 - 50kHz
Magnetic Indication North Pole:
Red LED
Magnetic Indication South Pole: Green LED
Operating Temperature:
-5oC to 40oC
Supply:
9V alkaline battery, MN1604 or equivalent (excluded)
Housing:
Flame Retardant ABS
Dimensions:
202mm x 32mm x 22mm
Weight:
150g
Classic Check Plug
Description
Martindale TEK200 Non-Contact Voltage & Magnetic Indicator
Pack
Quantity
Greenwoods
Part Number
Single
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
30
95ZZ0025
Cable Tracing | Voice & Data Testing
Cable Tracing Kits
The Tempo CTS Cable Tracing Kit is a versatile, simple to operate device which offers a low
cost solution for cable location and pair identification.
Features:
•
Cable location
•
Cable identification
•
Cable depthing
•
Pair tracing
•
Versatile
•
Simple to operate
•
High performance
•
Low cost
Cable Tracing Kit
Description
Pack
Quantity
Tempo CTS132 Cable Tracing Kit
Single
Greenwoods
Part Number
95ZZ0215
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
31
Voice & Data Testing | Network Tracing
Network Tracing Kit
The Test-Um KP501 Network Tracing Kit is ideal for testing CAT 5 & 6 cables. This kit
features:
TP600
The LanRoverPRO Tester/Analyzer is the high performance length measurement CAT5
tester that identifies multiple faults clearly without interpretation, has one-ended testing with
pre-test for fast result, clear wiremapping form displayed on 2-line, 16 character LCD display
and measures cable length.
LB220
The Lil' Buttie Pro test set sets a new performance standard in field testing. Compact (7.5"
length), lightweight (less than 8 oz) and hands free, it is small enough to wear on your belt
or even carry in your shirt pocket.
TT100
The Tone Tracer sets a new standard for field service professionals. Due to its slim,
ergonomic design, as well as balanced weighting, the TT100 is the most comfortable tracer
available.
TG100
Test-Um's innovative and unique Multi-Function Tone Generator gives the user a multitude
of features not available on any other tone generator. Auto-off, multiple tone capabilities, full
talk battery and low battery indicator
KP501 Package Contents:
•
TP600: LanRoverPROTM
•
LB220: Lil' Buttie ProTM
•
TT100: High-Sensitivity Tone Tracer
•
TG100: Multi-Function Tone Generator
•
TP609: #1 Replacement Remote Identifier
•
TP40: 12in. Cable Assembly, RJ45/alligator clips
•
TP56: 12in. Cable Assembly, unshielded, RJ45 connectors
•
LB35: Deluxe Cord Set, bed of nails
•
LB40B: Mini Headset - Headset/Microphone
•
LB60B: Deluxe Swivel Belt Clip
•
TT30: Round Tip
•
Instruction Manual
Network Tracing Kit
Description
Test-Um CAT 5/6 Network Tracing Kit
Pack
Quantity
Greenwoods
Part Number
Single
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
32
95ZZ0252
Signal Tracing | Voice & Data Testing
Signal Tracing
The Test-Um KP100 Professional Tone & Trace Signal Tracing Kit. A tough Corduratm kit
pouch houses the Tone Tracer (TT100) and the Tone Generator (TG100) for convenience in
the field. A closure flap protects the instruments and has both a belt loop on the back as well
as a metal clip ring for multiple mounting options. The kit includes one cord set with alligator
clips.
TT100
The Tone Tracer sets a new standard for field service professionals. Due to its slim,
ergonomic design, as well as balanced weighting, the TT100 is the most comfortable tracer
available. It can be used with either a wearable headset of a standard cell phone set. Quickchange tips make for easier in-field use.
TG100
Test-Um's innovative and unique Multi-Function Tone Generator gives the user a multitude
of features not available on any other tone generator. Auto-off, multiple tone capabilities, full
talk battery, low battery indicator, and other great features make the TG100 the choice for
professionals when tracing lines and finding the right signal path for data and voice
installations. Its compact size, only 4 inches in length, allows the TG100 to fit into any
existing belt pouch.
KP100 Field Kit Package Contents:
•
Tone Tracer High-Sensitivity, TT100
•
Tone Generator Multi-Function, TG100
•
24" cord set, RJ11 to alligator clip set, TG10
•
7.5" Cable Assembly, with no-fault RJ12 connectors for RJ11 and RJ45 jacks, TP20
•
Round tip for tone tracer, TT30
•
Paddle-style tip for tone tracer, TT35
•
Lanyard
•
Pouch for Tone Tracer and Tone Generator, PC200
•
Instruction Manual
Signal Tracing Kit
Description
Pack
Quantity
Test-Um Signal Tracing Kit
Single
Greenwoods
Part Number
95ZZ0250
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
33
Voice & Data Testing | Test Telephones
Test Telephone
The DSTS 2 is an ideal low-cost butt-in telephone with all the essential features. Selected by
Network Operators and Customer Equipment Installers around the world for its reliability and
ease of operation.
Features:
•
High Impact Case
•
Ground Start/Earth Calling
•
Tone/Pulse Operation
•
Timed Break Recall
•
Polarity Check
•
Sounder
•
Unlimited Line Voltage Protection
•
Belt Clip/Hanging Loop
•
High Impedance Monitor
•
High Clarity Electret Mircophone
Specifications:
Impedance:
390 + 620Ω in parallel with 310nf
Max Line Resistance:
4kΩ
Minimum Current:
10 mA
Maximum Current:
< 80mA
Monitor:
10kΩ 0-8 kHz
Loop Disconnect:
10pps 66 Break
Pre- & Inter-digit pause:
800msecs
DTMF:
Level -8 to -11 dBm
Humidity:
0-95% Non-condensing
Temperature:
-40oC to +50oC
Insulation:
> 150MΩ
Protection against
> 80mA
Transmission:
4dB per Octave
Reception:
Acoustic Shock Protected
Test Telephones
Description
Pack
Quantity
Greenwoods
Part Number
Tempo, DSTS2 Test Telephone with UK BT Plug
Single
95ZZ0005
Tempo, 431A to 3 Croc Clips and Krone Plug with Earth Lead Cord Set
Single
95ZZ0105
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
34
Test & Certifiers | Voice & Data Testing
Test & Certifier
The Test-Um TP100 Tell-All Indicator is the ideal test and certifier for identifying 10-Base-T,
Token Ring and 100Mbit Systems.
Features:
•
Voltage On-Line
•
One-Ended Testing
•
Jack ID Test
•
Identifies 10-BasE-T, Token Ring, 100Mbit Systems
•
Includes built-in battery
•
Detects voltage and polarity
TP100 Package contents:
•
TP100: Tell All Indicator
•
TP10: Replacement jumper cable
Test & Certifiers
Description
Pack
Quantity
Test-Um TP100 Tell-All Indicator Test & Certifier
Single
Greenwoods
Part Number
95ZZ0262
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
35
Voice & Data Testing | Test & Certifiers
Test & Certifier
The Test-Um TP500 LanRover & TP600 LanRoverPRO cable testers are a unique blend of
a popular type of low-end tester interface with an advanced microprocessor controller. The
most popular aspects of this type of tester are an indication at both ends that the cable has
been tested, no buttons to push to perform a test and a case that snaps together for storage.
The microprocessor brings the additional features of automatic power management, split
pair error detection, direct indication of the type and location of faults and tone generation.
The patented split pair detection technique allows the LanRover to have these advanced
features at a reasonable price.
LanRover offers a new performance level for verification of wiring faults and configurations
on all your data cable.
Features:
TP500 & TP600:
•
Wire Pair Map / Test
•
Default Fault Indicator
•
Remote Included
•
Tone Generator
•
Auto Off
•
CAT Cables
•
One-Ended Testing
TP600 Only:
•
Coax with Adaptor
•
LCD Display
•
Voltage Online
•
Works with Wire Map Kit
•
Wire Length
•
Distance to Fault (Open Only)
Test & Certifiers
Description
Pack
Quantity
Greenwoods
Part Number
Test-Um TP500 LanRover Test & Certifier
Single
95ZZ0260
Test-Um TP600 LanRoverPRO Test & Certifier
Single
95ZZ0264
Test-Um TP607 LanRoverPRO Test & Certifier Kit with 8 Remote Identifiers
Single
95ZZ0266
Including; Remotes #1 - #8, RJ45 to Alligator Clip Set, RJ45 to Coax Adaptor,
Unshielded RJ45 Connectors, Wire Configuration Sticker, Ref Card & Carry Case
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
36
Tone Kit | Voice & Data Testing
Tone Probe & Generators
The Tempo PTS 100 tone probe and PTS 200 Tone Generator are a complementary set of
tools for identifying wires and wire pairs. Once the PTS 200 is attached to a wire pair, the
PTS 100's probe tip will pick up the generator's warbling tone when it's near the pair, allowing
the user to isolate and identify the pair.
Features:
PTS 200
•
100Hz + 100Hz Sweep Tone Generator
•
Output Level –6dB to +3dB
•
Typical battery life – 800 hours
PTS 100
•
Sensitivity control, 30dB adjustment
•
Easy push-button operation
•
Built-in loudspeaker
•
Works with an 500Hz to 1.2kHz oscillator
Tone & Probes
Description
Pack
Quantity
Greenwoods
Part Number
Tempo PTS 100 Tone Probe, M0115/00
Single
Tempo PTS 200 Tone Probe with RJ11 Plug, M0111/00
Single
95ZZ0210
95ZZ0211
Tempo PTS 200 Tone Probe with 432A Plug, M0111/01
Single
95ZZ0212
Tempo PTS 100/200 Tone & Probe Kit, M0114/00
Single
95ZZ0230
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
37
Voice & Data Testing | Tone Tracing
Tone Tracing Probe
Tone tracing probes designed specifically to meet the needs of organizations operating large
copper networks and in particular those who are committed to improving service delivery and
reducing whole life costs.
Nautilus range products are "operating - environment hardened" to deliver new standards in
reducing Whole Life costs. Each product includes a "shell" designed to breathe and
safeguard the functional elements from water, dust, impact and temperature change.
Features:
•
Micro controlled
•
Filter options
•
Key press timing
•
Confirmation tones
•
Battery-low warning
•
Auto shut off
•
Headset connection
•
Sealed electronics
•
Sealed battery
•
Large high output speaker
•
Wrist strap
•
One button control
•
Crush proof
•
Chemical resistant
Tone Tracing Probe
Description
Tempo 500J Tone Probe with Metal Tip
Pack
Quantity
Greenwoods
Part Number
Single
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
38
95ZZ0200
Tone Generators | Voice & Data Testing
Tone Generators
Tone geneartor designed specifically to meet the needs of organisations operating large
copper networks. It generates short bursts of 1kHz sine wave at any one of 4 cadence rates.
The balanced sine wave output prevents disruption of digital traffic.
Nautilus range products are "operating environment - hardened" to deliver new standards in
reducing Whole Life costs.
Each product includes a "shell" designed to breathe and
safeguard the functional elements from water, dust, impact and temperature change.
Chesivale specialises in the design and supply of equipment used to deploy and maintain
the fixed copper connection between two communicating entities.
Features:
•
Balanced output
•
High-level output
•
Micro controlled
•
Key press timing
•
Battery-low warning
•
Indicates short circuits
•
Long Battery Life
•
Sealed electronics
•
Sealed battery
•
Wrist strap
•
One-button control
•
Crush proof
•
Chemical resistant
The Tone generator is allowed to 'breathe' via a patented membrane to ensure that it floats
if accidentally dropped into deep water. The membrane also prevents changes in internal
pressure from sucking in moisture.
Tone Generators
Description
Pack
Quantity
Tempo 600J Tone Generator
Single
Greenwoods
Part Number
95ZZ0220
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
39
Part Number Index
Part Number
Reference
Page
54FJ6200
54FJ6201
54FJ6202
54FJ6203
54FJ6204
54FJ6205
54FJ6206
54FJ6207
54FJ6208
54FJ6210
54FJ6211
54FJ6212
54FJ6213
54FJ6214
54FJ6215
54FJ6216
54FJ6217
54FJ6218
54FJ6220
54FJ6221
54FJ6222
54FJ6223
54FJ6224
54FJ6225
54FJ6226
54FJ6227
54FJ6228
54FJ6229
54FJ6250
54FJ6251
54FJ6252
54FJ6253
54FJ6254
54FJ6255
54FJ6256
54FJ6270
54FJ6271
54SN6056
95ZZ0005
95ZZ0007
95ZZ0008
95ZZ0010
95ZZ0011
95ZZ0014
95ZZ0018
95ZZ0019
95ZZ0020
95ZZ0022
95ZZ0023
95ZZ0024
95ZZ0025
95ZZ0026
95ZZ0105
95ZZ0130
95ZZ0140
95ZZ0150
95ZZ0155
95ZZ0160
95ZZ0165
95ZZ0166
95ZZ0170
95ZZ0200
95ZZ0210
95ZZ0211
95ZZ0212
95ZZ0215
95ZZ0220
OPM1-2C
OPM1-3C
OPM4-1D
OPM4-2D
OPM4-3D
OPM4-4D
OPM5-2D
OPM5-3D
OPM5-4D
OLS1-1C
OLS1-2C
OLS1-DUAL
OLS2-1310
OLS2-1550
OLS2-1625
OLS2-DUAL1310
OLS2-DUAL1550
OLS4
M200-K-QUAD
M200-K-MM
M200-K-SM
8800-00-0200
8800-00-0209
8800-00-0202
8800-00-0221
8800-00-0225
8800-00-0230
8800-00-0231
MLP1-1
MLP1-2
MLP4-2
MLP5-2
SMLP4-4
SMLP5-5
SLP4-6D
FID-20R
FID-21R
DSTS2
FLUKE 87V
FLUKE 175
TEK402
FLUKE 322
V113700G
FLUKE 83V
FLUKE 177
PC15250
TEK404
VR2240SC
IN2102
TEK200
CM58
431A
FLUKE 337
LP2000
MM45
FLUKE 179
RC2000
CP501
BZ101
HPAT600
500J
PTS 100
PTS 200 432A
PTS 200 RJ11
CT132
600J
6
6
6
6
6
6
7
7
7
8
8
8
9
9
9
9
9
9
10
10
10
7
7
7
7
7
7
7
11
11
11
11
11
11
11
5
5
4
34
22
23
18
16
29
22
23
25
18
12
19
25
14
34
17
20
21
23
26
27
28
24
38
37
37
37
31
39
95ZZ0230
95ZZ0250
95ZZ0252
95ZZ0260
95ZZ0262
95ZZ0264
95ZZ0266
TMEG0010
TMEG0040
PTS 100/200
KP100
KP501
TP500
TP100
TP600
TP607
MFT1552
MMC80
37
33
32
36
35
36
36
13
15
Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK (t): + 44(0)845 226 2327 (f): + 44 (0) 845 226 2328
www.greenwoodscomms.com [email protected]
40
GREENWOODS COMMUNICATIONS
EXTENSIVE RANGE OF PRODUCTS INCLUDES:
CONNECTORS
Type 43, HDC43, UHDC43, 1.6/5.6, 1.0/2.3, D-Type, 75-120Ω
Baluns, Power, RJ45, Fibre
DIGITAL DISTRIBUTION SYSTEMS
Standard BT43, HDC43, UHDC43, 1.6/5.6, 1.0/2.3, IDC
FIBRE OPTICS
E2000, FC, LC, MU, SC, ST, TAP8, Patch Panels, Patchcords,
CABLE
75Ω Coax, Twisted Pair, 120Ω, Power, Belden, Data, Fibre
STRUCTURED CABLING
Face Plates, Patch Panels, Cable, Adaptors, Patchcords,
Connectors, Modules
RACKS AND CABINETS
19” Racks/Cabinets, ETSI Frames, TEP-1E Rack, Rack 91,
Multi-Practice Racks
INSTALLATION MATERIALS
Trunking, Unistrut, Conduit, Fibre Optic Ducting, Cable Trays,
Basket Mesh, etc.
INSTALLATION SERVICES
Skilled engineers to carry out telecommunications installation
and commissioning
ACCESSORIES AND TOOLING
A full range to support all of the above
PROTECTIVE WORKWEAR
Quality range of protective clothing and safety equipment
for more INFORMATION please CALL + 44 (0)845 226 2327
ecatalogue.greenwoodscomms.com
41
Greenwoods Communications Highway Point Gorsey Lane Coleshill Birmingham B46 1JU
(t): +44 (0)845 226 2327 (f): +44 (0)845 226 2328 [email protected]
www.greenwoodscomms.com
012/0309
Information provided in this document is based on our general experience. However, because of the various factors which can affect product performance, no warranty is given nor is to be implied.
Users should make their own enquiries as to the suitability of the product for any particular application.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement