2012 st1300 abs specifications

2012 ST1300 ABS SPECIFICATIONS*
ENGINE
ENGINE
Engine Type
1261cc liquid-cooled longitudinally mounted 90° V-4
Bore and Stroke
78mm x 66mm
InductionProgrammed Fuel Injection (PGM-FI) with automatic enricher circuit, four 36mm throttle body bodies,
eight holes per injector
Ignition
Computer-controlled digital with 3-D mapping and electronic advance
Compression Ratio
10.8:1
Valve Train
DOHC; four valves per cylinder
DRIVE TRAIN
TransmissionFive-speed
DRIVE TRAIN
Final Drive
Shaft
DRIVE TRAIN CHASSIS / SUSPENSION / BRAKES
Front Suspension45mm fork; 4.0 inches travel
Rear SuspensionHMAS gas-charged single shock with five-position spring-preload adjustability; 4.8 inches travel
Front Brake
Dual full-floating 310mm discs with CBS three-piston calipers with ABS
Rear Brake
Single 316mm disc with CBS three-piston caliper with ABS
Front Tire
120/70ZR-18
Rear Tire
170/60ZR-17
DIMENSIONS
Rake (Caster Angle)
26.0°
Trail
98mm (3.9 inches)
Wheelbase
58.7 inches
Seat Height
31.1 inches (+/- 0.6 inches)
Curb Weight
730 pounds (Includes all standard equipment, required fluids and full tank of fuel—ready to ride.)
Fuel Capacity
7.7 gallons
Estimated Fuel Economy †
35 mpg
OTHER
Model ID
ST1300 ABS
Emissions
Meets current EPA standards. California version meets current California Air Resources) standards
Board (CARB) standards and may differ slightly due to emissions equipment.
Available Colors
Black
FACTORY WARRANTY INFORMATION
Three YearTransferable, unlimited-mileage limited warranty; extended coverage available with a
Honda Protection Plan.
*All figures are preliminary and subject to change.
†Honda’s fuel economy estimates are based on EPA exhaust emission measurement test procedures and are intended for comparison purposes only. Your actual mileage will vary depending on
how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors.
©2011 American Honda Motor Co., Inc. - Motorcycle Division

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project