Addonics | ADSACFASTB | User guide | Addonics ADSACFAST-N card reader

Addonics ADSACFAST-N card reader
User Guide
T E C H N O L O G I E S
SATA - CFast Adapter
(ADSACFASTB / ADSACFAST-N)
ADSACFAST-N
15-Pin SATA Power
Connector
7-Pin SATA
DATA Port
Drive Activity LED
ADSACFASTB
15-Pin SATA Power
Connector
7-Pin SATA
Data Port
Drive Activity LED
v5.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Hardware Installation:
ADSACFAST-N
Step 1
Connect 15-pin SATA power cable to the power connector on the adapter. This will
provide power to the adapter and the CFAST card.
Step 2
Connect a SATA cable to the SATA connector on the adapter and the other end to
the SATA controller port.
Step 3
Start the Computer.
Note:
If you insert the CFAST card while your system is ON and it does not get
detected, probably your SATA host controller does not support hot swap.
ADSACFASTB
Step 1
Connect 15-pin SATA power cable to the power connector on the adapter. This will
provide power to the adapter and the CFAST card.
Step 2
Connect a SATA cable to the SATA connector on the adapter and the other end to
the SATA controller port.
Step 3
Start the Computer.
Note:
If you insert the CFAST card while your system is ON and it does not get
detected, probably your SATA host controller does not support hot swap.
CONTACT US
www.addonics.com
Phone:
Fax:
Email:
408-573-8580
408-573-8588
http://www.addonics.com/sales/query/
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising