Scosche S31 car kit

Scosche S31 car kit
S3-1
MULTI-PLATFORM STEREO REPLACEMENT
WITH STEERING WHEEL CONTROL INTERFACE
FOR CHRYSLER, GM, FORD & TOYOTA JBL
The cutting edge S3-1 interface from Scosche allows you to replace your
factory OEM stereo while retaining all necessary safety & warning features as
well as retaining your original steering wheels controls (if vehicle is equipped).
STEERING WHEEL CONTROLS
NO Steering wheel programming is required! The S3-1 Interface has
built-in protocols for popular aftermarket stereos including:
ALPINE KENWOOD CLARION PIONEER JVC
SONY
S3-1 INSTALLATION HARNESSES*
A vehicle-specific harness is required for installing the S3-1 interface (*sold separately).
Verify your vehicle’s compatability by checking the list included with vehicle-specific
harness.
S3CR02 2005-10 Select Chrysler S3-1 harness
S3CR04 2007-UP Select Chrysler S3-1 harness
S3FD23
2005-UP Select Ford, Linc, Merc S3-1 harness
S3GMCL2 2003-UP Select GM Class II S3-1 harness
S3GM11C
2004-UP Select GM LAN11 24Pin S3-1 harness
S3GM11L 2006-UP Select GM LAN11 14/16Pin S3-1 harness
S3GMLAN 2006-UP Select GM LAN29 14/16 Pin S3-1 harness
S3TA03
2004-UP Select Toyota JBL S3-1 harness
TECH
SUPPORT: If you have any questions or need
Technical Assistance with the installation, or the most
current applications, please call 1-800-621-3695x3
©2011 SCOSCHE INDUSTRIES, INC.
SI - S3-1 (3000553) 6/11
PRELIMINARY
S3-1 Functionality by vehicle platform:
Make
ACC/R.A.P.
Power
Steering
Wheel
Controls
Warning
Chimes
Premium
Sound
Activation
Fade F/R
Chrysler Not required No
Ford Not required No
GM LAN Std. Bose only
GM Class II Std. Bose only
Toyota !
Not required Not required JBL Sys only
No
BEFORE BEGINNING: READ THIS INSTRUCTION MANUAL
Disconnect the negative battery terminal to avoid short circuits. Read ALL
vehicle manufacturer’s warnings regarding airbags and electrical systems.
We recommend ONLY a volt/ohm meter when checking/testing vehicle
wiring. A test light (grounded probe type) can damage a vehicle’s computer
and/or electronics systems.
COMPONENT OVERVIEW
Steering Wheel
Control Module
3.5mm Steering
Wheel output
(Alpine, Clarion,
JVC, Pioneer, Sony)
Blue Steering
Wheel output
(Kenwood)
S3-1 Interface
Module
2
INSTALLATION OVERVIEW
AFTERMARKET
STEREO
3.5mm steering wheel
output cable
(Alpine, Clarion, JVC,
Pioneer, Sony)
Blue steering wheel
output wire (Kenwood)
S3-1 Vehicle-specific
wire harness
(sold separately for
Chrysler, Ford,
GM, Toyota)
S3-1 MAIN
MODULE
steering
wheel
module
TO VEHICLE
3
WIRE COLOR CODES
White White/Black Green Green/Black Black Yellow Red Blue
= Left Front Positive (LF+) Gray = Left Front Negative (LF-) Gray/Black = Left Rear Positive (LR+) Violet = Left Rear Negative (LR-) Violet/Black
= Chassis Ground Orange
= +12V Constant Power Blue/White
= +12V Accessory/R.A.P output = +12V Power Antenna
= Right Front Positive (RF+)
= Right Front Negative (RF-)
= Right Rear Positive (RR+)
= Right Rear Negative (RR-)
= Illumination
= +12 Remote Output
(Amp, radio on signal)
NAVIGATION CONNECTIONS:
Violet/White = VSS Vehicle speed pulse signal
Red/White = Reverse light trigger (+12V when in reverse gear)
Yellow/Black = Parking brake trigger (-12V when park brake ON)
Orange/White = Auto illumination (Data controlled lighting output on some GM LAN
applications with AUTO headlights enabeled)
NOTE: The RED Accessory output wire from the S3-1 interface is rated at 10A Max output for most aftermarket head unit demands. We do NOT recommended connecting additional +12V switched accessories to this output source as it may cause damage to the S3-1 module itself. If 10A output is not
sufficient, then a relay is needed (Relay not included).
NOTE: Illumination & auto illumination outputs are designed for head unit
connections only.
S3-1 SPEAKER / AUDIO CONNECTIONS
RCA LOW LEVEL
•
•
•
GM Bose
(Excludes Prem. Bose)
Ford Premium Sound
Toyota JBL/Lexus
SPEAKER WIRE
(Cut-off RCAs)
• Chrysler
• Ford (Non-Premium)**
• GM Bose (Non-Bose)
**ATTN: All Ford Harness RCA cutting must be performed on vehicle side of the
circuit board.
4
BASIC WIRING INSTRUCTIONS
The following steps are provided as a general guide. For specific information for your
vehicle, consult the instructions supplied with your vehicle-specific S3-1 harnness
(sold separately).
1. Disconnect the negative battery cable from the battery to avoid short circuits.
2. Remove and unplug factory stereo. (If needed, call Scosche Toll-free Tech for
assistance with radio removal: (800) 621-3695 Ext. 3)
3. Match and connect the Power/ground wires from the S3-1 Vehicle specific
harness to the wires provided with your stereo. The color codes on the Scosche
harness are designed to match most aftermarket stereos.
• Take note that some of the wires for your new stereo come from the S3-1
interface box itself and not the vehicle connectors.
4a.The S3-1 speaker connections are pre-terminated with RCA jacks for installations
requiring Line input: Toyota JBL, GM Standard Bose and Ford Premium sound.
4b. If your vehicle does not have a Bose or Premium system, cut off the RCAs
and wire the speaker leads directly to the speaker wires from the new stereo.
4c.All FORD harnesses must have RCAs cut on vehicle side of circuit board.
5. Tape any unused wiring to prevent short circuit.
7. Reconnect the negative battery cable**.
** For GM vehicles, alternate power up (initialization steps) are required.
See General Motors specific notes section.
8. As you install your new stereo, place the S3-1 module(s) and harnesses in the rear
of the dash cavity behind the stereo.
OPTIONAL: Cable ties or double-sided tape can be used to secure the module, but
are not included.
CHRYSLER & TOYOTA INSTALLATION NOTES
CHRYSLER: PREMIUM ALPINE, BOSTON & INFINITY SYSTEMS
These factory amplified sound systems are driven and digitally controlled by a single
set of left/right input channels only. The aftermarket radio does not have the ability to
control fade or balance adjustments on these types of systems. There is NO front/rear
fader control. The balance and fader are set to center by interface control software.
TOYOTA JBL / LEXUS PREMIUM SYSTEMS
These factory amplified sound systems are driven and digitally controlled by a single
set of left/right input channels only. The aftermarket radio does not have the ability to
control fader on these types of systems. There is NO front/rear fader control. The fader
is set to center by interface control software.
5
GENERAL MOTORS INSTALLATION NOTES
HOW TO TEST FOR “PREMIUM BOSE” SYSTEMS
There are two types of Bose systems available in some models of GM vehicles. The
S3-1 interface is not compatible with the Digital Premium BOSE (y91/z75 systems) To
test for digital Bose systems, turn the factory radio volume up and down rapidly. If the
sound system reacts immediately then the system is a Standard Bose, not a Premium
Bose. If there’s a slight delay in the system as you turn it up and down quickly, then this
vehicle may have Premium BOSE. Note: you may also check the service parts code
sticker usually located in the glove box for “y91” or “z75” equipment codes.
S3-1 GENERAL MOTORS INTEGRATED SAFETY & WARNING CHIMES
When replacing the factory stereo in your GM vehicle, the S3-1 interface will replace
portions of your vehicle’s audible SAFETY and WARNING CHIME systems. If the stereo
is removed without the proper accessory these functions of your vehicle will be LOST
including: Your vehicle’s ECM (Electronics Control Module) will also store an error code if
operated without the factory radio installed and you may experience difficulty in having
the vehicle serviced at the dealership. The Scosche S3-1 will send the proper data
commands to your vehicle’s ECM (Electronics Control Module) to indicate a “healthy”
status for diagnostic purposes.
WARNING & SAFETY CHIMES LIST:
•
•
•
•
Parking assist Lights left on reminder Turn signal click Low fuel
• Seatbelt warning chime
• Check engine/service indicator
• Key left in ignition reminder
POWER UP (Initialization procedure)
In order to ensure the proper functionality of the S3-1’s +12V RED Accessory wire, we
recommend that the following procedure be followed; in sequence.
1. Disconnect the Scosche Interface from the vehicle radio harness.
2. Close all doors and hood, Turn off all lights and remove the keys from the ignition.
3. Wait 3 to 4 minutes (without opening a door, turning on a light, inserting keys,etc.).
4. Connect the Scosche Interface to the vehicle’s radio harness and start vehicle.
5. Test interface for functionality.
6
STEERING WHEEL MODULE
STEERING WHEEL MODULE SETUP
The Scosche S3-1 offers “plug and play” steering wheel control setup. No complicated
learning, programming or splicing wires is required. Setup can be completed in just
seconds! (Tool is provided by Scosche.)
1.
Break off the small flat blade
adjustment driver from the
side of the steering wheel
module housing as shown in illustration.
2.
Carefully click the selector (arrow)
dial to the correct letter that
corresponds with the brand of
aftermarket stereo you are installing:
A=ALPINE, C=CLARION, J=JVC,
K=KENWOOD, P=PIONEER, S=SONY
3. Connect the steering wheel control module harness to the Main S3-1
interface via the 10-Pin connector. (This step not shown)
4. Plug the 3.5mm connector into the “Remote” jack on the back of your
aftermarket stereo. For Kenwood, connect the Blue wire to the remote
control input wire of the radio. (This step not shown)
7
STEERING WHEEL CONTROLS: CHRYSLER
CHRYSLER / DODGE / JEEP Version 1
STEERING WHEEL LEGEND 2005-08
Seek up
preset
Seek down
source
volume
volume
S
J
K
C
A
P
Sony JVC Kenwood Clarion Alpine Pioneer
Vol Up + Vol + Vol + Vol +
Vol + Vol + Vol +
Vol Down - Vol - Vol - Vol - Vol - Vol - Vol -
Source Source Source Source Source Source Source
Preset FM Presets FM Presets Seek Up/Trk Up FM Preset/Disc Trk 1 FM Presets Seek Up Seek Up/Track Up Sk Up/Trk Up Seek Up/Trk Up FM Preset Up/Trk Up Seek Up/Track Up Seek Up/Track Up
Seek Down Seek Dn/Track Dn Sk Dn/Trk Dn Seek Dn/Trk Dn FM Preset Dn/Trk Dn Seek Dn/Track Dn Seek Dn/Track Dn
FM Presets
CHRYSLER / DODGE / JEEP Version 2
STEERING WHEEL LEGEND 2009-UP
(Uses controls on BACK of Steering wheel ONLY)
vol up
seek up
source
preset
vol
down
seek
down
S
J
K
C
A
P
Sony JVC Kenwood Clarion Alpine Pioneer
Vol Up + Vol Up Vol Up
Vol Up Vol Up Vol Up
Vol Down - Vol Dwn Vol Up Vol Dwn
Vol Dwn Vol Dwn Vol Dwn Vol Dwn
Source Source Source Source Source Source Seek Up
Seek Up/Track Up Sk Up/Trk Up Seek Up/Trk Up FM Preset Up/Trk Up FM Presets Source
Seek Up/Track Up
Seek Down Seek Dn/Track Dn Sk Dn/Trk Dn Seek Dn/Trk Dn FM Preset Dn/Trk Dn Seek Up/Track Up Seek Dn/Track Dn
Preset FM Preset /Disk Trk 1 Next FM Preset Next FM Preset Preset Up Seek Up/Trk Up Next FM Preset
Volume control note:
Press once: up/down (one increment); Press and hold: up/down (continuous)
8
STEERING WHEEL CONTROLS: GM
Seek up/
preset up
GENERAL MOTORS
LAN STEERING
WHEEL LEGEND
2006-UP
source
vol UP
MUTE
vol down
Seek DN/
preset DN
preset/band
S
J
K
C
A
P
Sony JVC Kenwood Clarion Alpine Pioneer
Vol Up Vol Up Vol Up Vol Up
Vol Up Vol Up Vol Up
Vol Down Vol Down Vol Down Vol Down Vol Down Vol Down Vol Down
Source Source Source
Source Source Source Source Speak Icon Mute Mute Mute Mute Mute Mute
Preset/Band Preset Up Band Seek Up Band Preset Up Preset Up
Seek Up Seek Up Track Up Preset/Track Up Preset Up
Seek/Track Up
Seek Down Track Down Preset/Track Down Seek/Track Down Seek /Track Down
Seek/Track Up Seek Down Seek/Track Dn GENERAL MOTORS CLASS II
STEERING WHEEL LEGEND
source
seek up/TRACK UP
mute
VOL UP
preset/band
VOL down
source
seek DN/TRACK DN
S
J
K
C
A
P
Sony JVC Kenwood Clarion Alpine Pioneer
Vol Up + Vol Up Vol Up Vol Up
Vol Up Vol Up Vol Up
Vol Down - Vol Dwn Vol Down
Vol Down Vol Down Vol Dwn Vol Dwn
Source Up Source Source Source Source Source Source
Source Down Source Source Source Source Source Source
Seek Up
Seek/Track Up Seek Up Track Up Preset/Track Up Seek/Track Up Seek/Track Up
Seek Down
Seek /Track Down Seek Down Track Down Preset/Track Dn Seek/Track Dn Seek/Track Dn
Speak Icon Mute Mute Mute Mute Mute Mute
Program Preset Up Band Seek Up Band
Preset Up Preset Up
Volume control note:
Press once: up/down (one increment); Press and hold: up/down (continuous)
9
STEERING WHEEL CONTROLS: GM
GENERAL MOTORS GM LAN 11 BIT
STEERING WHEEL LEGEND
MUTE
vol UP
vol down
Seek up/track up
Seek DowN/track down
S
J
K
C
A
P
Sony JVC Kenwood Clarion Alpine Pioneer
Vol Up+ Vol Up Vol Up
Vol Up Vol Up Vol Up
Vol Down- Vol Down Vol Up Vol Down Vol Down Vol Down Vol Down Vol Down
Seek Up Seek/Track Up
Seek/Trk Up Seek/Trk Up Seek/Track Up
Seek/Track Up
Seek Down Seek/Track Down Seek/Trk Dn Seek/Track Up Seek/Trk Dn Seek/Track Down Seek/Track Down Seek /Track Down
Speak Icon Mute Mute Mute Mute Mute Mute
TOYOTA STEERING WHEEL LEGEND
VOLUME UP
VOLUME down
seek DOWN/
PREset DOWN
seek up/
PRESET UP
source
MODE
S
J
K
C
A
P
Sony JVC Kenwood Clarion Alpine Pioneer
Vol Up + Vol + Vol +
Vol + Vol + Vol +
Vol Down - Vol - Vol + Vol -
Vol - Vol - Vol - Vol -
Mode Source Source Source Source Source Source
Seek Up
FM Presets FM Presets Seek Up/Trk Up FM Preset/Disk Trk 1 FM Presets Seek Up
Seek Up/Track Up Seek Up/Trk Up Seek Up/Trk Up FM Preset Up/Trk Up Seek Up/Track Up Seek Up/Track Up
Seek Down
Seek Dn/Track Dn Seek Dn/Trk Dn Seek Dn/Trk Dn
FM Presets
FM Preset Dn/Trk Dn Seek Dn/Track Dn Seek Dn/Track Dn
Volume control note:
Press once: up/down (one increment); Press and hold: up/down (continuous)
10
STEERING WHEEL CONTROLS
FORD STEERING WHEEL LEGEND
vol
vol down
vol UP
Seek DowN
Seek up
media
or
SOURCE
S
J
K
C
A
P
Sony JVC Kenwood Clarion Alpine Pioneer
Vol Up+ Vol Up Vol Up Vol Up
Vol Up Vol Up Vol Up
Vol Down- Vol Down Vol Down Vol Down Vol Down Vol Down Vol Down
Source
Source Source
Source
Source
Media/Music Note Source Seek Up
Seek Up/Track Up Sk Up/Trk Up Seek Up/Trk Up FM Preset Up/Trk Up Seek Up/Track Up Seek Up/Track Up
Seek Down Seek Dn/Track Dn Sk Dn/Trk Dn Seek Dn/Trk Dn FM Preset Dn/Trk Dn Seek Dn/Track Dn Mute
Volume control note:
Press once: up/down (one increment); Press and hold: up/down (continuous)
11
STEERING WHEEL NOTES & TROUBLESHOOTING
STEERING WHEEL CONTROL NOTES & EXCEPTIONS
The illustrations of steering wheel controls and buttons in this manual are “typical”.
The actual controls and placement of the controls varies between each make, model,
trim level, and/or options package. The overall operation and characteristics are
similar between makes. If you experience difficulty with operation or the information
provided in this manual, please call our Toll-free Tech support line (800) 621-3695
Ext. 3 or visit our website for other support options including “Live” chat and email:
www.scosche.com.
For Volume UP/DOWN operation, pressing either button once will increase or decrease
ONE small increment. Press and hold for continuous UP or DOWN volume adjustment.
For CD Seek UP/DOWN operation, pressing either button once will skip UP or DOWN
tracks. Press and hold for manual track FWD/RR.
The radio seek UP/DOWN operation varies between stereo brands. In some cases
pressing the seek UP/DOWN button once will skip UP or DOWN to the next strong
radio station. In other cases, this button will select through Memory preset stations
on the stereo. Consult the steering wheel control pages for your particular brand and
configuration.
TROUBLESHOOTING
Stereo will not respond to Factory steering controls:
Verify vehicle compatibility. Check the S3-1 harness instruction for your particular
vehicle listing.
Verify / Check installation:
1. Check connections at S3-1 module, verify power, ground is present.
2. Check to determine if steering wheel control module is properly connected to
main S3-1 module.
3. Check to determine if steering wheel OUTPUT wire or 3.5mm cable is
connected to the correct steering wheel INPUT at the back of the aftermarket
stereo.
4. Check to determine that steering wheel selection potentiometer is set to
matching brand of aftermarket radio i.e. A: Alpine, C: Clarion, J: JVC,
K: Kenwood, P: Pioneer, S: Sony (see page 3)
LIMITED WARRANTY
Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a
period of 90 days from purchase. This Scosche product is sold with the understanding that the purchaser
has independently determined the suitability of this product. This warranty is offered to the original
purchaser of the product only. This warranty does not cover the product if physically damaged, subject
to negligence or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to
product which has water or physically damaged by accident or which has been misused, disassembled
or altered.
The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should
prove defective within the warranty period, return the product with proof of purchase to Scosche Industries
Inc. Scosche, at its option, will replace or repair the product free of charge and return the product postage
paid.
In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the
defective product, or in any way be liable or responsible for consequential or incidental damages. No
empress warranties and no implied warranties, whether for fitness or any particular use or otherwise,
except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products
sold by Scosche. Scosche Industries cannot be held responsible for discrepancies/inconsistencies that
may occur due to automotive manufacturing changes or option.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement