Airwell RC5 User manual
PROGRAMMING AND OPERATION MANUAL
MODES OF OPERATION, FUNCTIONS AND FEATURES
USE OF WIRELESS REMOTE CONTROL
Turning on the air conditioner
Cooling operation with auto fan mode
Heating operation with auto fan mode
● Auto cooling/heating operation
Selecting the temperature
Timer operating modes
Automatic vertical air swing
Turning off the air conditioner
Current clock time set
IF YOUR AIR CONDITIONER
IS FOR COOLING ONLY,
PLEASE DISREGARD THE
PLEASE READ THESE
OPERATING THE AIR
OPERATION MODES, FUNCTIONS
Cools, dehumidifies and filters the room air. Maintains the desired room temperature.
Heats and filters the room air. Maintains the desired room temperature.
Automatically switches from COOLING to HEATING or from HEATING to
COOLING, maintaining the desired temperature according to the room conditions.
Dehumidifies and softly cools the room In DRY Mode, the air conditioner operates at an increased dehumidifying power. This function is recommended to be used when temperature is rather low but the humidity is high.
Recirculates and filters the room air. Maintains constant air movement.
The air conditioner automatically selects the FAN speed in accordance with the room temperature. At the start, the unit operates at high fan speed. As the room air approaches to the desired temperature, the fan switches to a lower speed for quieter operation.
Real time control and display, automatically turns the air conditioner ON and
OFF according to the time of day setting, ensuring comfort conditions before returning home, without wasting electricity. It turns the air conditioner off automatically when sleeping.
Designed to create comfortable sleeping conditions. When in COOLING mode, the temperature rises one degree centigrade every hour, for three hours, from the start of the mode. The temperature rise prevents the feeling of over-cooling while sleeping (when your body is at rest). In HEATING mode the reverse occurs; the air conditioner lowers its temperature one degree every hour. When in SLEEP mode, the air conditioner will be automatically turned off after seven hours. The result is a more comfortable and invigorating sleep, which leaves you feeling fresh and energetic in the morning.
The air louvre is automatically positioned for the most suitable blow-out angle, when COOL, HEAT, DRY or FAN modes are selected. When the air conditioner is turned off, the louvre will close automatically providing an aesthetic appearance.
Automatic swing of supply air in vertical direction. The louvre moves automatically in upward and downward direction to spread the conditioned air evenly throughout the room.
The air conditioner will store all the settings of the MODE button in COOL, HEAT,
AUTO, DRY and FAN
USE OF WIRELESS REMOTE CONTROL
Prior to operating your air conditioner, make sure that:
The red tab protecting the remote control batteries has been removed.
For clock setting see page 8.
CONTROL PUTS ALL
FUNCTIONS AT YOUR
Aim at the infrared signal receiver on the room air conditioner when operating.
The remote control signal can be received at a distance of up to about 8 m.
Be sure that there is nothing between the remote control and the signal receptor.
Do not drop or throw the remote control.
Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, and/or other heat source.
Do not expose the air conditioner signal receiver to a strong light such as fluorescent lamp or sunlight
REMOTE CONTROL BATTERY CHANGE
● Remove the batteries from the remote control as shown.
● Use two 1.5 volt size AAA batteries
● Perform reset operation by pressing buttons (9), (10), (13), (14)
● For protecting the environment please return used batteries for recycling process.
HOLDER (DESK TYPE)
Use the remote control holder when unit is not in use.
Remote control can be slipped in or out its holder.
Operation MODE selection button
AUTO COOL / HEAT
FAN SPEED and AUTO
Automatic vertical air swing
TIMER UP button
TIMER DOWN button
LCD operation display
Infrared signal transmitter
TIMER SET button
TIMER CLEAR button
TURNING ON THE AIR CONDITIONER
Press START/STOP button (1) to turn the air conditioner on.Operation
Indicator on the air conditioner will light up, indicating that the unit is in operation. Note that the LCD operation display (11) will always show the last mode of operation and previous function used.
Follow the instructions if you choose to change the control settings; otherwise, the air conditioner will start and operate in the same mode and functions prior to being turned off.
Select the ventilating mode by pressing MODE button (2). Switch to the desired fan speed by pressing FAN speed button (3).
Select the COOLING mode by pressing MODE button (2). Switch to the desired FAN SPEED or to AUTO FAN by pressing button (3). Select suitable temperature setting. By selecting the COOLING mode, the air flap will move automatically to air delivery position, optimal for cooling.
COOLING OPERATION WITH AUTO FAN MODE
This operation starts with the highest air flow in order to quickly lower the room temperature. It will then automatically switch to the low air flow to quietly maintain the selected temperature.
Select the HEATING mode by pressing MODE button (2). Switch to the desired FAN SPEED or to AUTO FAN by pressing FAN button (3). Select suitable temperature setting. By selecting the HEATING mode, the air flap will move automatically to air delivery position, optimal for heating.
HEATING OPERATION WITH AUTO FAN MODE
This operation starts with the highest air flow in order to quickly raise the room temperature. It will then automatically switch to a lower air flow to quietly maintain the selected temperature. HEATING with AUTO FAN will automatically provide the user with the HOT KEEP function. The fan will be turned off when the indoor coil temperature is not sufficiently hot to prevent uncomfortable cold air drafts.
AUTO COOLING/HEATING OPERATION
Select the AUTO mode by pressing MODE button (2). Switch to the desired
FAN SPEED or to AUTO FAN by pressing button (3). Select suitable temperature setting. The air flap will automatically move to either horizontal air delivery for cooling or to vertical air delivery for heating. At start, the air conditioner will select its mode of operation according to the room temperature and the temperature setting.
Select the DRY mode by pressing MODE button (2). Select the suitable temperature setting. While in DRY mode, the air conditioner will operate at low fan speed, regardless of the fan setting on the LCD operation display. Fan might terminate operation from time to time to prevent from over cooling. By selecting the mode, the air flap will move automatically to optimal horizontal air delivery position.
SELECTING THE TEMPERATURE
Press TEMP buttons (4) or (5) to change the temperature setting in the LCD operation display (11). The temperature setting is shown in degrees centigrade. A higher number indicates a higher room temperature. A lower number indicates a lower room temperature
Press the SLEEP button (6) to select the SLEEP function. When the sleep function is activated the air conditioner will be automatically turned OFF after seven hours. If at the same time TIMER is activated, as well, the air conditioner will be turned ON and OFF according to the TIMER setting.
To cancel the SLEEP function press on one of the following :
START/STOP button (1)
SLEEP button (6)
Press TIMER select button (8) to activate the timed operation mode. Each time the TIMER button (8) is pressed, one of the following four types of operation modes will appear on the LCD display. The operation modes are sequenced in the direction of arrow. TIMER Indicator on the air conditioner will light up during TIMER operation.
Note: After power failure when the unit is in timer mode TIMER indicator will be blinking and the unit will be automatically turned to stand-by mode and the timer operation will be cancelled. To resume the timer wait 30 sec. before reprograming. Follow the instructions above.
TIMER OPERATING MODES
I. TIMER ON
This mode enables you to set a start operating time
. Press the TIMER button (8) till the ON sign blinks.
Start time can be adjusted using up and down buttons
(9) and (10) respectively. Press SET button (13) to activate the timer.
Example: Operation is restored at 10:30.
II. TIMER OFF
This mode enables you to set the stop time of operation. Press the TIMER button (8) till the OFF sign blinks. Time can be adjusted using up and down buttons (9) and (10) respectively. Press SET button
(13) to activate the timer.
Example: Operation stops at 18:00
Use this mode to cancel timer operation. Press
CLEAR button (14), timer operation will terminate and the LCD display will be cleared for each timer mode.
Note: If timer button (8) is selected and neither time adjust, SET, or CLEAR buttons are pressed within
15 seconds, the timer operation will be cancelled and the last set-up will be displayed.
III. TIMER ON AND OFF
This mode enables you to set the start and stop time of operation. Press the TIMER button (8) till the ON sign blinks. By pressing again the OFF sign blinks.
Time can be adjusted by using the up and down buttons (9) and (10), respectively. Press SET button
(13) to activate the timer. The LCD display will show the current time.
Example: Operation is restored at 10:30 and stops at 18:00
Note: After pressing set button (13) the LCD will display the current time.
AUTOMATIC VERTICAL AIR SWING
Press button (7) to activate the auto air swing. Press button (7) to deactivate this function.
TURNING OFF THE AIR CONDITIONER
Press START/STOP button (1) to turn off the air conditioner. operation Indicator
on the air conditioner will be turned off. STAND-BY Indicator will stay lit, indicating that the air conditioner is in STAND-BY mode and ready to accept any new command from the remote control. The remote control LCD will display the clock time. The last operating set-up will be kept for the next operation.
CURRENT CLOCK TIME SET
Clock setting is performed when batteries are inserted. The remote control displays the setting and the clock display will blink "0:00" or "12:00" AM (AM sign will blink, too) till a new time is set.
For clock setting, use buttons (9) and (10) for setting the hours and minutes, respectively, and then press timer SET button (13). The clock setting can be also performed by pressing timer SET button (13) for 5 seconds.
The clock display will blink, for new setting follow the steps described above.
TECHNICAL ENQUIRIES SERVICE / WARRANTY
1800 1800 04 1300 553 000
745 Springvale Road
Mulgrave VIC 3170
TEL: (03) 9271 3505 FAX: (03) 9271 3540
CNR Marion St & Airport Ave
(P.O. Box. VQ)Banktown
Airport NSW 2200
TEL: (02) 9793 3644 FAX: (02) 9793 3688
Unit 9, 123 Muriel Ave
Moorooka QLD 4105
TEL: (07) 3392 8113 FAX: (07) 3392 8115
Offices on the parkSuite 27, 8
Wayville SA 5034
TEL: (08) 8372 7866 FAX: (08) 8372 7816
Suite 23, 350 Cambridge St
Wembley WA 6014
TEL: (08) 9284 0800 FAX: (08) 9284 0600
Suite 3, 19 Darby Street
Newcastle NSW 2300
TEL: (02) 4940 4652 FAX: (02) 4940 4653
517A Rosebank Road
Avondale, Auckland NZ
TEL: (09) 820 0333 FAX: (09)
NZ Tech Support Freecall
TEL: 0800 180 094 www.airwell.com.au
WITH A CONCERN FOR A CONSTANT IMPROVEMENT, OUR PRODUCTS CAN BE MODIFIED WITHOUT NOTICE. PHOTOS NON CONTRACTUAL. © Copyright 2003
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project