TK-7160 / 8160

TK-7160 / 8160
Kenwood USA Corporation
March 2009
Land Mobile Radio Division Price Guide
TK-7160 / 8160
VHF/UHF Conventional Mobile Radios
All 160 series mobiles include:
• Standard Microphone (KMC-35)
• Mounting Bracket
• DC Cable (KCT-23M)
• 15A (HK) or 10A (K) Fuse
• Instruction Manual
• Standard Warranty: 2 Years*
* All Accessories / options: 1 Year
GENERAL FEATURES
• 25 / 50 W (136-174 MHz) Models
• 25 / 45 W (450-490 MHz) Models
• Conventional Zones
• 128 Channels / 128 Zones
• Single Priority Scan
• Single / Multi-Zone Scan
• 8-Character Alphanumeric Aliases
• Backlit LCD & Keys
• Function/Status LCD Icons
• Transmit /Busy / Call Alert LED
• 9 Programmable Function Keys
• Emergency / AUX Key
• Enhanced Kenwood Audio
• Front Panel Speaker
• Companded Audio
• Voice Inversion Scrambler Built-in
• Encryption / ANI Board Control
• Emergency Call Features
• QT / DQT
• Operator Selectable Tone
• Two-Tone Decode
• Single & Two-Tone Encode
• DTMF Encode / Decode
• Special Alert Tone Patterns
• Call Key
• Busy Channel Lockout
• Time Out Timer
• Timed Power Off
• Accessory Interface Cable Option
• 8 Programmable I/O Ports
• Ignition Sense
• Public Address / Horn Alert Option
• MIL-Spec Standard Mic
• MIL-Spec 12-Key DTMF Mic Option
• Windows® Programming & Tuning
• Front Panel Field-Program Mode
• Cloning
• MIL-STD-810 C/D/E/F
FleetSync®
• PTT ID Digital ANI
• Selective Call & Group Call
• Status Messaging
• Emergency Status
• Caller ID Display
• Input / Output Status Messages
• FleetSync® GPS Ready
• Send GPS PF Key
• PTT ID & Emergency GPS Reporting
• Ignition On/Off GPS Reporting
MODEL
TK-7160K
TK-7160HK
TK-8160K
TK-8160HK
LIST
136-174 MHz 25W, 128 CH / 128 Zone Conventional
136-174 MHz 50W, 128 CH / 128 Zone Conventional
450-490 MHz 25W, 128 CH / 128 Zone Conventional
450-490 MHz 45W, 128 CH / 128 Zone Conventional
467.00
533.00
483.00
550.00
MOBILE INSTALLATION ACCESSORIES
LIST
Horn Alert/P.A. Relay Option
63.00
13.70
22.00
43.75
42.00
26.30
KAP-2
KCT-18
KCT-39
KCT-36
KLF-2
KMB-10
Ignition sense cable (requires KCT-39 Acc. Cable Option)
Radio Interface Cable for KGP-2A/2B & KDS-100
Extension Cable for KCT-34/35/39/40M; 117.6 inches (9.8 ft)
Line Filter (suppresses alternator whine, 25dB, 25A max).
Key lock adapter
CONTROL STATION INSTALLATION ACCESSORIES
KMC-9C
KMB-24
KPS-15
Control Station Desktop Microphone (8-pin mod. plug)
Control Station Mounting Case for KPS-15 Power Supplies for 180/160-series mobiles.
(mobile mounting hardware included)
DC Switching Power Supply (117/230 VAC; 23A max. continuous, 25A peak)
Page 1 of 4
LIST
86.00
42.00
173.00
TK-7160・8160
Kenwood USA Corporation
March 2009
Land Mobile Radio Division Price Guide
MICROPHONES AND SPEAKERS
KMC-35
KMC-36
KMC-9C
KES-3
KES-5
LIST
Standard dynamic mobile microphone (8-pin mod. plug)
Standard dynamic mobile microphone with DTMF keypad (8-pin mod. plug)
Control Station Desktop Microphone (8-pin mod. plug)
External speaker (compact low profile; black case; 3.5 mm phono plug-in)
External speaker, 40W max input
52.50
94.50
86.00
44.25
61.25
Note: requires KAP-2 (PA/HA unit) installed
FleetSync ® MOBILE DATA TERMINAL
KDS-100 Data Terminal includes:
• Mounting bracket
• Mounting hardware
• DC Cable
LIST
KDS-100 FEATURES
• Increases FleetSync® Message Viewing: 40 Character x 6 line Dot Matix LCD
- View 5 line Message List x 23 Char. @ line
(vs. 1 line Message x 16 Char. scrolling)
- View Short Text Messages (48 Char.) at once (vs. 48 Char. scrolling)
- View Long Text Message (1024 Char.) at once (vs. not available)
• Increases FleetSync® ID Capacity: 511 IDs (vs. 100 IDs)
- Base stations can handle larger size fleets
• Increases Status Message List Capacity: 89 Messages (vs. 50 Msgs.)
- More dispatcher-to-fleet type messages for different job tasks
- More fleet-to-dispatcher type messages for responses/statuses
• Increased Status Message Stack Memory: 367 Messages (vs. 9 Msg.s)
• Increased Short Text Message Stack Memory: 367 Messages (vs. 4 Msg.s)
• Litium Cell Memory Backup Battery (vs. radio-only volatile message memory)
• Large Backlit LCD & Function Keys
• Simple Installation
• Windows® Compatible Programming Software
• Programming Password Protection
• Built-in FleetSync® DSP Modem
• Real-Time Clock/Message Time Stamping
• 10 Status Message „Hot Keys‟
• Message Sorting & Deletion Screens
• Message Temporary Recycle Bin
• New Message Tone and LED Alerts
• Buzzer Volume Level
• Flashrom Firmeware Memory
Important Note:
1. KDS-100 Compatible Dispatch Software May Be Required - The KDS-100 used a fleet unit will
decode Status Messages and Selective Calls sent other FleetSync®-capable portables or mobiles, from a
KDS-100 with a FleetSync® capable mobile (PC mode) or a KDS-100 with a non-FleetSync® capable
mobile (air mode). However, Short and Long Text Messaging requires a base station FleetSync® capable
mobile PC Serial Interfaced with computer running a FleetSync® compatible dispatch software capable of
creating and sending Short/Long Text Messages. This software is available from vendors such as:
- IDA Corporation, Fargo ND: KenCall Dispatch software
- Kenwood Communications Corporation: Fleet Dispatch Pro software
2. The KDS-100 cannot be used simultaneously with a Kenwood KGP-2A/2B AVL unit.
KDS-100
FleetSync® Data Terminal
625.00
Note: The KDS-100 pigtail cable (1.83 ft) combined with the KDS-100 mobile interface cables KCT34/35/39/40M (1 ft.) and use a KCT-36 (9.8 ft.) for an extension.
KPG-71DK
KCT-39
KCT-36
Windows® Programming Software for KDS-100
Radio Interface Cable for KGP-2A/2B & KDS-100
Extension Cable for KCT-34/35/39/40M; 117.6 inches (9.8 ft)
Page 2 of 4
103.25
22.00
43.75
TK-7160・8160
Kenwood USA Corporation
March 2009
Land Mobile Radio Division Price Guide
AVL UNITS
LIST
KGP-2A/2B FEATURES
• Compatible Radios: 60G/62/63G/80/150/180/160-Series mobiles
• KGP-2A/2B air protocol is backward compatible with KGP-1A/1B
• Programmable Auto-reporting or polled updates
• 256 Mobile IDs x 256 Groups
• Mil-Spec 810C, D & E Dust, Vibration and Shock
• Over-the-air programming- Data Rate 1200 or 2400 baud
(except intial programming; see KPG-73D)
• Windows® 95, 98 & Me Programming Software (KPG-73D)
• Sixteen Multi-purpose Programmable I/O‟s [External Connectors; [DB-9 (ACC2); DB-15(ACC-3) ]
- Each I/O programmable for either an analog “input” or output”
(dispatch-AVL mapping software must support)
- Inputs for external sensors, switches, contacts, etc.
- Outputs for external relays, controls, etc. (mapping software must support)
• LED Status Indicators
- DC Source- indicates receiving power from the mobile
- Data- indicates KGP-unit is sending /receiving data
- GPS- indicates receiving a GPS signal (KGP-2A)
• Flashrom Firmware / Compact Size
Note: KGP-2A/2B Compatible AVL Mapping Software is Required
A KGP-2A/2B AVL system requires a AVL mapping software package “specifically engineered” for KGP®
protocol compatibility. Manning NavComp‟s RASTRAC software provides AVL mapping/fleet
management. To purchase, or for more information contact:
Manning NavComp, Inc.
4205 Park Dr.
Lago Vista, Texas 78645
Ph.: 512-267-7800, Fax: 512-267-9200
E-mail: [email protected]
Web: http://www.navcomp.com
FOR EACH BASE STATION ORDER:
1. KGP-2B Modem Unit - one KGP-Protocol base/control station modem unit required per AVL system
2. KCT-39 cable & L-xxx - connects the KGP-2B to the 160-Series base/control station mobile
3. Computer Serial Cable Required (not supplied)- The KGP-2B-to-PC COM Port connection for AVL data is made via a dealer-supplied computer serial communication
port cable. The serial cable should be a D-Sub 9-Pin Female (KGP-2B; ACC1 end) and the appropriate D-Sub 9-Pin or 25-Pin on the PC serial COM Port end. Serial
cables are wired "Null Modem" with pins 2-to-3 and 3-to-2 configured end connectors.
FOR EACH FLEET MOBILE ORDER:
1. KGP-2A GPS Receiver-Modem Unit - the KGP-Protocol fleet mobile unit
2. KCT-39 cable - connects the KGP-2A to the fleet 160-Series mobile
3. The KCT-19 & KCT-39 cannot be installed simultaneously- Therefore using a KCT-39 excludes plug-in of a KCT-19 for KES-5 external speaker (use KES-3), Horn Alert
output, Data modem I/O's, footswitch input and headsets.
KGP-2A
GPS Receiver / Modem Unit
551.00
(includes one dash-mount GPS antenna, mounting bracket, screw set)
1. One KCT-39 is required for each fleet and base mobile radio
2. The KCT-39 is 12 inches in length; use a KCT-36 (9.8 ft.) extension if required
KGP-2B
Base Modem Unit
236.50
1. One KCT-39 is required for each fleet and base mobile radio
2. The KCT-39 is 12 inches in length; use a KCT-36 (9.8 ft.) extension if required
KCT-39
KCT-36
KPG-73DK
Radio Interface Cable for KGP-2A/2B & KDS-100
Extension Cable for KCT-34/35/39/40M; 117.6 inches (9.8 ft)
Windows® Programming Software for KGP-2A/2B
Page 3 of 4
22.00
43.75
103.25
TK-7160・8160
Kenwood USA Corporation
March 2009
Land Mobile Radio Division Price Guide
OPTION MODULES
CIM-1000K-20
LIST
GE-Star or MDC-1200 ANI Encode 20-Pin Plug-in Board
131.25
Must order L-1057 or L-1058 for radio install & programming
Note: CIM-1000K-20 G-Star®/ MDC1200 Digital ANI (20-Pin Plug-in) Boards
Pre-programmed & installed boards require a completed CIM-1000K-20 Information and Order Sheet"
(available from Kenwood LMR Order Desk) submitted with order. a) Order the appropriate Labor Code for
MDC-1200 or G-Star.
b) CIM-1000K-20 boards can be ordered and shipped loose (if shipped loose, Kenwood will not program
the board).
CIM-CABLE
Serial Program Cable
61.25
Note: CIM-1000, K-20, K-26 programs via Windows Hyper terminal (Windows Ver 3.1 or later) or any
ProComm version; board must be installed in a powered radio for programming. The radio programmer
does NOT program the CIM-1000, K-20, K-26. CIM-CABLE is a DB-9 PC connector with 3 short lead with
clips and may require a PC serial extension cable. CIM-IRP (Part No 01-30-0510) Infrared wireless
standalone programmer, C-Plus line of desktop decoder displays and CIM-1000, K-20, K-26 Instruction
Manuals are available directly from Cimmarron Technologies 800-487-7184 at www.cimtechcorp.com
SERVICE RELATED ACCESSORIES
KPG-46AM
KCT-53UM
LIST
Programming interface cable
USB Adapter for KPG-xxAM DB9F Programming Interface Cables
(DB9M - to - USB Type A connector)
KPG-99DK
Windows® Programming Software for TK-7160/8160
*****************
Call Kenwood Parts at 800-367-7514 to order the following:
E30-3382-05
J29-0662-03
Clone cable
Mounting bracket for TK-7180/8180/7160/8160--same as supplied w/ radio (order N99-203905 for mounting screw set)
INSTALLATION / TUNING CHARGES
L-985
L-966
L-1010
L-1057
L-1058
191.00
86.00
103.25
11.28
39.50
LIST
TK-7160/8160 Programming (with basic TX/RX check)
Install KAP-2 (Default) HR1/Internal Sp./PA
Install KAP-2 (External Sp.) HR1/External Sp./PA
TK-7160/8160 CIM-1000K-20/MDC1200 ENCODER INSTALLATION
TK-7160/8160 CIM-1000K-20/GE STAR ENCODER INSTALLATION
Page 4 of 4
37.50
25.00
25.00
75.00
75.00
TK-7160・8160
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement