Panasonic | SCBTT270GN | Operating instructions | Panasonic SCBTT270GN User manual

Easy Setting Guide
Blu-ray DiscTM Home Theater Sound System
Model No.
The order of setting
1
Prepare the
speakers
See below
1
2
3
Place the
speakers
See below
4
Connect the
cables
See over
Turn on the
main unit
See over
2
Prepare the speakers
SC-BTT270
Easy setup
See Easy setup screen
Place the speakers
STEP 1
Label each speaker cable by attaching the
numbered sticker at the position indicated in
the illustration. Be sure to match the number
on each sticker with the circled number in the
illustration.
e.g., Front speaker Lch
FRONT
Lch
1
WHITE
→
speaker
Refer to the rear label of the speaker before connecting the corresponding
cable.
Verify the type of speaker with the label on the rear of the speaker.
Speakers
FRONT/AVANT
Centre speaker
CENTER/CENTRE
Surround speakers
SURROUND/AMBIOPHONIE
PURPLE
STEP 2
RED
L
R
GREEN
PURPLE
C
SW
BLUE
GREY
LS
RS
e.g.,

Front speakers
Subwoofer
WHITE
Centre speaker
GREEN

Front speakers
Surround speakers
Rch
Lch
Rch
Lch
RED
WHITE
GREY
BLUE
Connect the speaker cables.
Insert the wire fully, taking care not to insert
beyond the wire insulation.
: White
: Blue line

White





Recommended
Front speakers
(L, R)
Surround speakers
(LS, RS)
60
PUSH!
Blue line
120
VQC8267
F0111SB0
VQC8267_eng.indd 2-3
2011/01/11 19:08:49
3
Connect the cables
For detailed information, refer to the operating instructions.
Connect the cables by colour or by the numbers indicated in the illustration
to the appropriate terminals on the rear panel of the unit.
PURPLE
GREEN


RED
WHITE

GREY

Other connection
It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
BLUE

Broadband Network Connections
Adhesive tape
By connecting this unit to the network, you can optimise the
internet features of this unit.
• Use category 5 or above straight LAN cables (STP)
when connecting to peripheral devices.
• When using the wireless LAN function, the LAN cable that
connected to the main unit is not necessary.
FM indoor antenna
(supplied)

LAN
Main unit
3Ω
6
5
3Ω
2
1
R 3Ω L
4
3
R 3Ω L
FM ANT
75 Ω
SUBWOOFER CENTER FRONT SURROUND
Main unit
HDMI cable (not supplied)
(Recommended for highest quality picture)
HDMI
(ARC)
If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and
pictures with a single HDMI cable.
If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable”
or “Optical digital audio cable” is required to listen to sound from the TV.
HDMI
OPTICAL
OUT
TV
LAN cable
(not supplied)
AUX
Audio connection
For best quality audio, use the HDMI
cable (with an ARC compatible TV)
or an optical digital audio cable.
If your TV does not support the
above, use the audio cable.
Optical digital audio cable (not supplied)
Broadband router, etc.
VIDEO IN
Video cable*1 (supplied only for Australia and New Zealand.)
*1 Make sure that the video cable connection is
made to view photos/videos from the iPod/iPhone.
L
Internet
AUDIO OUT
Audio cable (not supplied)
R
4
1
Turn on the main unit
Connect the AC mains lead
Connect the AC mains lead to the
main unit before connecting to the
household mains socket.
2
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
3
4
Turn on the main unit
The Easy setup starts
The on screen display will guide you through the steps.
Press [ ] to turn
on the main unit.
Easy setup
Would you like to start easy setup?
Main unit
Yes
AC mains lead (supplied)
Installing batteries in the
remote control

No
OK
RETURN

Press [, ] to select [Yes] and press [OK].
R6/LR6, AA
To a household mains socket
VQC8267_eng.indd 4-5
2011/01/11 19:08:50
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising