User`s manual

Add to my manuals
15 Pages

advertisement

User`s manual | Manualzz

User’s manual

IMPACT DOT-MATRIX PRINTER

Proficient in Commercial POS Receipt Printers

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 1 -

Safety Notice:

*Don’t touch the head of printer with anything.

*Don’t touch the cutter blade.

*Don’t bend the power cord excessively or place any heavy objects onto it.

*Don’t use the printer when it is out of order. This can cause a fire or and electrocution.

*Only use the power cord excessively or place any heavy objects onto it.

*When connecting or disconnecting the plug, always hold the plug-not the cord.

*Keep the desiccant out of children’s reach.

*Use only approved accessories and do not try to disassemble, repair or remodel it for yourself.

*Install the printer on stable surface, choose firm, level surface where avoid vibration.

*Don’t let water or other foreign objects in the printer.

*Don’t connect a telephone line into the peripheral drive connector.

*We recommend that you unplug the printer from the power outlet if no use it for long period.

Available fields:

*Print POS system Receipts

*Print EFT POS system Receipts

*Print Gym, Post, hospital, civil aviation system Receipts

*Print Inquiry, Service system Receipts

*Print Instrument test Receipts

*

*Print Tax, Tab Receipts

Main Features:

*Command protocol is based on ESC/POS standard.

*Support black mark anchor testing print.

*High speed and Low-noise dot printing.

*Various Layouts are possible by using page mode

*High reliability due to a stable mechanism

*Repeated operation and copy printing are possible.

*Easy paper jam clearance.

*Easy maintenance for tasks such as head cleaning.

*Built-in interface provides control capability for cash drawer.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 2 -

Technique Spec.

Print method

Print speed

Paper width

Print columns

Character

Print command

Interface

Cutter

Reliability print

Copy capability

Paper thickness

Adaptor power input

Adaptor power output

Printer power input

Cash Drawer

Work Temperature

Storage temperature

Impact dot-matrix printing

3.5line/sec. (available for 7635XX)

4.5line/sec. (available for 7645XX)

5 line/sec. (available for Pro5)

76±0.5mm

400dots/line

ANK Character, Font A: 9*9 dots

Font B: 7*9 dots

Simplify/Traditional: 16*16 dots

Compatible with ESC/POS

Parallel, Serial, USB, Ethernet, Bluetooth full or partial cut

10 million lines (available for 76XX)

15 million lines (available for Pro5)

One original and two copies

0.05~0.08mm (total thickness≤0.20)

AC 110V/220V, 50~60Hz

DC24V/2A

DC 24V/2A

DC 24V/1A

5~45ºC, Dampness: 10~80%

-10~50ºC, Dampness: 10~90%

Buttons and Indicator

Available for 7635XX

STATUS Indicator FEED button POWER Indicator

Available for 7645XX, 76NI, Pro5

POWER Indicator ERROR Indicator PAPER Indicator FEED button

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 3 -

Connection

Note: take 76NI with auto cutter for example, other models are similar.

a.

Connect the adapter cable to power connector of the printer.

b.

Connect the data cable to the connector on the rear panel of the printer.

c.

Connect the cash drawer’s RJ-11 phone jack to the connector on the rear panel.

Installation of Paper Roll and Ink Ribbon

Please install after turn on the printer with indicators on.

a)

Open the top cover.

b)

Install the paper roll as the picture showing direction.

c)

Insert the end of the bottom paper into the paper take-up spool, be sure that the paper is aligned with the spool’s flange so that the paper is taken up by the spool.

d)

Cut redundant paper by the cutter.

e)

Open the printer’s cover, turn the knob five or six times in the direction of the arrow, insert the ink ribbon, and push the ribbon cassette down until it clicks.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 4 -

Set Print Mode(DIP Switch)

Set print mode by the DIP Switch, such as Black mark, Cutter, Language, Beep,

Density, Speed mode…

Interface

Serial

DIP-8

SW-1

SW-2

SW-3

SW-4

SW-5

SW-6

SW-7

SW-8

Baud rate

Function

Black mark

Auto cutter

Color switch

Character per line

Unidirection or Bidirection print

Two-bye character code

ON

ON

38400

OFF

ON

4800

ON OFF

Yes

Yes

Yes

42CPL/35CPL

No

No

No

40CPL/33CPL

Unidirection Bidirection

International mode Kanji mode

ON

OFF

9600

OFF

OFF

19200

Print self-test page

Self-test page can be showed the printer itself information including software version, interface type, DIP setting ect, for inspecting the printer if work normally or not.

To start the printer self-test, please follow the below steps:

1. Turn off the printer power.

2. Make sure the paper roll is installed correctly and the printer top cover is closed.

3. Press and hold on the FEED button and turning on the printer power simultaneously, hold on the FEED button till hearing a beep, then release the FEED button, self-test page prints out.

The printer will print the content as below after test-self done.

** Completed **

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 5 -

Driver Installation (WinXP in 32bit systems as an example)

a. Insert the bundled CD disk into the CD-ROM drive, in the CD-ROM menu, doubleclick the Windows driver Installation file (Driver_Install_Receipt_Label_GBEN.exe) to begin driver installation.

b.

Select the current printer model and port type to be used and click the “Install” button.

To know about the printer model and port type, please refer to the product information which labeling at the bottom of the printer.

NOTE: Take 76NI with auto cutter for example, other models are similar.

1. If using Parallel port, please install the driver as the following steps:

1.1 Select the 76NI(cut) and Parallel port to be used and click the “Install” button.

1.2 Click the “Finish” button.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 6 -

1.3 Driver installation finished, Click

【 start

-

【 device and printer

, driver of

76NI(cut) showed as bellow:

1.4 The Parallel Port setting can be confirmed in the Windows Driver properties. Click the “Print Test Page” button and check printing status. Proper installation of the driver is indicated if the test page is printed normally.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 7 -

2. If using Serial port, please install the driver as the following steps:

2.1 Select the 76NI(cut) and Serial port to be used and click the “Install” button.

2.2 Click the “Finish” button.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 8 -

2.3 Driver installation finished, Click

【 start

-

【 device and printer

, driver of

76NI(cut) showed as bellow:

2.4 The Serial Port setting can be confirmed in the Windows Driver properties. Click the “Port Settings” button in the ”Ports” tab. Match the communication settings to those of the printer.(The communication settings of the printer can be performed by conducting a self-test page.)

2.5 Click the “Print Test Page” button and check printing status. Proper installation of the driver is indicated if the test page is printed normally.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 9 -

3. If using USB port, please install the driver as the following steps:

3.1 Select the 76NI(cut) and USB port to be used and click the “Install” button.

3.2 Click the “Finish” button.

3.3 Driver installation finished, Click

【 start

-

【 device and printer

, driver of

76NI(cut) showed as bellow:

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 10 -

3.4 The USB Port setting can be confirmed in the Windows Driver properties. Click the “Print Test Page” button and check printing status. Proper installation of the driver is indicated if the test page is printed normally.

4. If using Ethernet port, please install the driver as the following steps:

4.1 Printer default IP address is 192.168.123.100, firstly change the computer IP address to 192.168.123.120 as below, in order to keep on the same network segment with printer. Then Computer can not go online at the present.

4.2 Press window+R button, input cmd

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 11 -

4.3 The window appears as below:

4.4 Then input ping 192.168.123.100 –t to check if the printer IP address is able to ping to computer or not. Press enter, the window appears as below, then works.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 12 -

4.5 Change the printer IP address using tools. Install GPETHERNETnew.exe, and then run it. The window appears as below:

4.6 Change printer new IP address to 192.168. 0.XXX, and then click “set new IP

Address”. Please be noted that you can set any IP under 192.168.0.XXX but avoid conflict to any current computer IP.

4.7 Change the computer IP address to original IP, the computer can go online now.

4.8 Double-click the Windows driver Installation file

(Driver_Install_Receipt_Label_GBEN.exe) to begin driver installation.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 13 -

4.9 Select the 76NI(cut) and TCP/IP port to be used and click the “Install” button.

4.10 Click the “Finish” button.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 14 -

4.11 Driver installation finished, Click

【 start

-

【 device and printer

, driver of

76NI(cut) showed as bellow:

4.12 The Ethernet Port setting can be confirmed in the Windows Driver properties.

Click the “Print Test Page” button and check printing status. Proper installation of the driver is indicated if the test page is printed normally.

-----------------

IMPACT DOT-MATRIX RECEIPT PRINTER

------------------

-

- 15 -

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement