iP5000_ESI_US_V1.qxd 6/8/04 2:00 PM Page 1

1

Unpack the Printer

1 Carefully remove all items from the box.

PIXMA iP5000 Series

Photo Printer

Photo Printer

Series

Quick Start Guide

2

Prepare the Printer

Start Here

Easy Setup Instructions

3

Install the Print Head

4

Install the Ink Tanks

5

Connect the Printer and Load Paper

Series

Photo Printer

1 Remove all shipping tape and clear plastic from the printer.

2 Plug the power cord into the back of the printer and connect the other end to a power outlet.

Press the POWER button. The printer will initialize.

1 Remove the print head from its package.

POWER

Button

POWER Lamp

2

Tear at notch to open

Remove the orange protective cap from the print head.

NOTE: Do not touch the print head nozzles and the electrical contacts.

1 Peel back the orange tab and completely remove the plastic wrapper from the Cyan Ink

Tank (BCI-6C).

2 Twist off and discard the orange protective cap.

NOTE: To avoid spilling ink, never press on the sides of an ink tank.

Protective Cap

IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready.

1 TURN THE PRINTER OFF.

2 Connect one end of the USB cable to the computer, the other to the printer.

USB Cable

USB Port

Documentation and

Software Kit

PIXMA iP5000 Series

Print Head

Power Cord

BCI-6BK Black

BCI-3eBK Black

BCI-6Y Yellow

Ink Tanks

BCI-6M Magenta

BCI-6C Cyan

3 Lower the front cover. Raise the top cover.

Lower the inner cover.

Top Cover

Inner Cover

3 Insert the ink tank into the correct slot.

(Refer to the color guide on the print head lock lever.)

Press down until the ink tank clicks into place.

Front Cover

4 The print head holder automatically moves to the center. Remove the protective tape.

Protective Tape

Serial Number

Print Head Nozzles

3 Raise the print head lock lever.

Electrical Contacts click

4 Insert the remaining four ink tanks into their assigned slots.

4 Slide the print head into the holder.

The print head will rest at a slight angle.

5 Close (a) the inner cover and then (b) the top cover. Lift open the paper support and extend the paper output tray.

IMPORTANT: Be sure to close the inner cover completely, or the paper will not feed properly.

Paper Support

(a) Inner Cover

(b) Top Cover

5 Write down the serial number located to the right of the print head holder. You will need this later to register the product.

5 Lower the print head lock lever and press it down until it clicks into place.

Paper Output Tray

NOTE: The printer will perform a print head cleaning. Wait until the POWER lamp displays a steady green light before proceeding.

USB Cable

3 Remove the shipping tape from the paper guide. Pinch the paper guide and slide it to the left. Load a few sheets of blank paper into the auto sheet feeder, then slide the paper guide toward the left edge of the paper.

Auto Sheet

Feeder

Paper Guide

USB Port

IMPORTANT: Print Head Alignment (Step 6) requires that 8.5" x 11" paper is loaded in the

Auto Sheet Feeder (top paper feeder).

click

Serial Number

Location

Continue with Step 6 on side two.

iP5000_ESI_US_V1.qxd 6/8/04 2:00 PM Page 2

6

Windows

®

Printer Driver Installation and Print Head Alignment

6

Macintosh

®

Printer Driver Installation and Print Head Alignment

Win dow s

1 Be sure to TURN THE PRINTER OFF before continuing.

NOTE: For Windows ® XP or Windows 2000, log on to Windows as a member of the

Administrators group before continuing.

IMPORTANT: If you see the Found New

Hardware Wizard, click Cancel.

4 When the "Printer Connection" window appears, TURN THE PRINTER ON. The software will begin identifying the printer port being used.

Ma cin to sh

NOTE: For Mac OS 9.x printer driver instructions, refer to the "Appendix" of the Quick Start Guide.

1 Turn on your Mac and your printer and insert the “Setup Software & User's Guide” CD-ROM.

NOTE: Log on as an Administrator before continuing.

2 Double-click the CD-ROM icon, then the Mac

OS X folder, then the Printer Driver folder.

6 Start the print head alignment procedure.

a.

Double-click the Macintosh HD icon, then

Applications folder. Double-click the

Utilities folder, then the Printer Setup

Utility icon.

b.

When the Printer List screen appears, select iP5000 , then click the Utility icon.

IMPORTANT: If your computer cannot detect a printer port, click Help and refer to the online instructions.

5 Follow the on-screen instructions to install the remaining software. When the "Installation

Results" window appears, click OK.

3 Double-click the PIXMA iP5000 290.pkg icon, then follow the on-screen instructions.

If the printer is not displayed in the Printer

List , you need to add it on the list.

For details, follow the instructions in Mac

Help .

c.

Select iP5000 and click Maintenance.

2 Close any open software applications including anti-virus, computer security and other software. Then insert the Setup Software &

User’s Guide CD-ROM. The setup program should run automatically.

NOTE: If the setup program does not run, click

Start , then Run, then type D:\msetup.exe, where D is your CD-ROM drive.

3

When the main menu appears, click Easy

Install and follow on-screen instructions.

6 Follow the on-screen instructions to register your product.

7 When the "Print Head Alignment" screen appears, ensure that letter size paper is loaded in the auto sheet feeder (top paper feeder).

Click Execute and follow on-screen instructions.

NOTE: When the "Authenticate" screen appears, enter your administrator name and password.

If you do not know your administrator name or password, click , then follow the on-screen instructions.

d.

Ensure that letter size paper is loaded in the auto sheet feeder (top paper feeder).

e.

Click the down-arrow to select Test Print.

Click the Print Head Alignment icon and follow the on-screen instructions.

4 When the message "The software was successfully installed" appears, click Restart.

NOTE: Select Easy Install in order to install the application software, electronic manual and printer driver. Select Custom Install in order to choose the options you would like to install.

NOTE: Print head alignment will take several minutes to complete.

8 When the "Installation completed successfully" screen appears, click Exit.

NOTE: When Restart is displayed, ensure the

Restart the system now (recommended) check box is selected, then click Restart.

5 When a message asking you to align the print head appears, click OK.

NOTE: Print head alignment will take several minutes to complete.

7

Cassette Loading

3 Remove the cover of the cassette.

Cover

4 Slide the long edge paper guide to the left and the short edge paper guide toward you.

Long Edge

Guide

6 Replace the cover of the cassette.

Cover

NOTE: Loading paper in the cassette provides additional paper handling flexibility. For additional information visit the electronic User's

Guide.

1 Push in the paper output tray and close the front cover.

2 Pull out the cassette from the bottom of the printer.

NOTE: For letter-size (8.5" x 11") paper, push the tab and extend the tray.

Short Edge

Guide

5 Load paper so that the top right corner touches the inside corner of the cassette. Adjust paper guides to the edges of paper.

7 Insert cassette completely into the printer until it clicks into place.

7 Click Quit to exit the BJ Printer Utility. Print head alignment is now complete.

8 Access your CD-ROM again. From the Application folder on the CD-ROM, double-click on the software to be installed.

9 Follow the on-screen instructions. When the

“Installation is completed” screen appears, click

OK .

10 Double-click on the Product Registration icon, found in the Mac OS X folder, to register your product.

8 Lower the front cover and extend the paper output tray.

Front Cover

Paper Output Tray

Tab

Top Right

Corner click

NOTE: For letter-size (8.5" x 11") paper, the front edge of the cassette will extend beyond the bottom of the printer.

Auto

Sheet Feeder

Lamp

Cassette

Lamp

Paper Feed

Switch

NOTE: When feeding paper from the cassette, press the paper feed switch so that the cassette lamp turns on.

Part no. QA7-3439-V01 © 2004 Canon Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand.