Eaton 5110 UPS - Allied Electronics
350-1500 VA power protection for PC,
telephone and networking equipment
Powerware series
Eaton 5110 UPS
Features
• Protect the integrity of your data and applications by shielding
electronic equipment from power outages, surges, sags, brownouts, and overvoltage conditions
• Save space with a compact design that can be deployed as a
tower or under a computer monitor
• Protect loads on eight outlets—four with surge suppression and
battery backup, four with surge suppression only
• Deliver consistent, clean output with automatic voltage regulation
(AVR) that doesn’t drain battery power
• Extend UPS service life with user-replaceable batteries
• Protect networked equipment from “back door” power surges
coming through LAN or telephone lines
• Stay informed of power problems and battery conditions with
audible alarms and remote alarm notification via e-mail, pager, the Web, or SNMP
• Deliver short-term mobile power with start-on-battery capability
Product snapshot
Product rating: 350–1500 VA
Voltage 120V and 230V
Frequency:
50 Hz and 60 Hz, auto-sensing
• USB port and cables are standard
• Rest easy with a two-year limited warranty and $150,000 load protection guarantee (US and Canada); optional multi-year Gold
Plan service is available to provide repair and replacement coverage that goes beyond the provisions of the limited warranty
Configuration:Plug-and-play tower or under monitor
Topology:Line-interactive
As much as business depends
on electric power, public utility
power is anything but dependable. By law, public utilities do
not have to supply computergrade power. That’s bad news
in an age when sensitive computer systems form the core of
virtually all business functions.
Advances in processing capacity
and miniaturization make these
systems more susceptible than
ever to power fluctuations—and
make system crashes and data
losses more costly than ever.
According to National Power
Laboratories (NPL) and the
Electric Power Research
Institute, the typical power customer location can experience
an average of 24 power disturbances each month, costing the
US economy $119 billion to $188
billion every year.
You don’t have to be a part of those statistics. Effective protection is here, at a very
attractive price.
The Eaton® 5110 uninterruptible
power system (UPS) provides a
layer of defense between your
equipment and raw utility power.
This line-interactive UPS constantly safeguards your systems
from power outages, surges,
sags, brownouts, and overvoltage conditions—and provides
varying degrees of protection
from other power problems as
well. If utility power is interrupted, even briefly, the 5110
transfers to battery power.
Introducing the Eaton 5110 UPS
Affordable protection
for small to medium
organizations
Incorporating more than 40
years of UPS design experience,
the 5110 provides cost-effective
power management, backup
power, and power quality for
office workstations, PBX or key
telephone systems, servers,
small network nodes, point-ofsale systems, and computer
peripheral devices. This UPS is
ideal for any small- to mid-sized
business or institutional setting
where reliable power must be
provided at an affordable price.
Automatic voltage
regulation (AVR)—clean
power without draining
the battery
The 5110 uses AVR to smooth
out wide fluctuations in input
voltage. If input voltage varies
as much as 25 percent over
or 23 percent under nominal
voltage—which can easily happen when running on generator
power or in severe environments—the 5110 accepts this
inconsistent voltage and delivers clean, consistent output
for protected equipment. AVR
enables you to work through
even the most frequent brownouts and power sags.
Unlike typical line-interactive
systems, the 5110 does not
switch back and forth to battery
power to accomplish this voltage regulation—which would
shorten battery life and increase
battery replacement costs.
As a result, battery power is
conserved for when you really
need it.
Eight outlets in a
low-profile tower
The 5110 occupies a small
footprint—about the size of a
dictionary for low-power units
(500–700 VA), or a sleek tower
for higher-rated models (1000–
1500 VA). This tower package
fits easily under a monitor.
The cost-effective design features eight outlets, four with
surge protection and battery
backup and four with surge
On/Off/Test switch
UPS battery LED
Warning LED:
Low battery = steady
Overload = flashing
UPS power LED
Battery
access
panel
2
EATON CORPORATION
Eaton 5110 UPS
protection only. You can plug
less critical equipment, such as
printers or monitors, into surgeprotection-only outlets that do
not drain battery power.
Protection for data lines
Incoming power lines aren’t
the only source of damaging
surges. Power also travels
across network links, such as
LANs and telephone lines. The
5110 uses an integral network
transient protector to safeguard
network-connected equipment—such as fax machines,
modems, or electronic telephones—from “back door”
power surges coming through
network or phone wiring.
Short-term power for
mobile applications
The 5110 supports start-onbattery capability, which means
you can unplug the UPS from
utility power, then restart and
run it from battery power elsewhere. This capability offers
tremendous flexibility for shortterm powering needs, such
as in mobile offices or service
vans.
UPS
communication
port
Surge-protected
outlets (four each) with
spacing for transformer
block plug-in
Input line
cord
User-replaceable batteries
for extended service life
Many UPS products in this range
are useful only up to the service
life of their batteries. When the
battery fails, the unit is worthless. Not so with the 5110. You
can replace the batteries yourself—a simple process that can
be performed by easy access
through the front panel. When
the audible alarm indicates that
batteries need replacing, you
can safely and easily install
supplied batteries and remove
the old batteries for proper disposal and recycling. You can also
choose to return the entire unit
for repair or battery replacement
under our warranty and service
programs.
Easy-to-understand
LEDs and audible alarms
You never have to guess about
the status and condition of
your 5110. Simple LED indicators and audible alarms warn of
power problems and low battery
conditions. The Battery LED
illuminates when the UPS is
operating on battery power. The
Warning LED turns on when the
battery is low and flashes under
overload conditions.
Data line
protection
UPS-backed
(four outlets)
with spacing for
transformer block
plug-in
Circuit breaker
The 5110 delivers confidence—confidence
that your vital business equipment is protected and confidence that Eaton will be
there with you for the long term.
Remote UPS monitoring
from anywhere
Warranty coverage with
load protection guarantee
You don’t have to be within sight
of the UPS to stay informed.
You can connect the 5110 to a
network using the built-in USB
port, and monitor its working
status. The UPS comes with
Eaton LanSafe® software, free
of charge. This UPS management software gives you control
and visibility over all your UPSs,
using an intuitive, graphical
interface.
Rest easy with industry-leading
protection from Eaton. The 5110
is backed by a two-year limited
warranty and a $150,000 load
protection guarantee. We’re that
confident of the performance
and reliability of the 5110.
To find out more about how the 5110 can protect your critical equipment, applications,
and data:
www.eaton.com/powerquality
800-356-5794
5110 technical specifications
1
Operation
Input voltage range
0–160Vac/0–300Vac
Output voltage range
Nominal -23% to +25%
On battery output voltage
Nominal -12% to +10%
Frequency
50/60 Hz auto sensing
Lighting / surge protection
120V models 320 joules; 230V models 476 joules
Safety UL 1778, designed to meet UL497A, CAN/CSAOC22.2 No107.1/IEC 62040-1-1: CE low voltage directive
EMI
FCC Class B/IEC 62040-2, EN55022: Class B: CE EMC directive
Transfer time to battery/AC
2-6 msec. typical
Battery type
Sealed, maintenance free lead-acid battery
Typical backup time
Three minutes at full rated load
Internet / phone / fax protection RJ11/RJ45
Short circuit protection
Circuit breaker
Communication port
USB
Environmental
Operation temperature
Operation relative humidity
Storage temperature
0°C ~ 40°C
0 to 95% non-condensing
-15°C ~ 50°C
Software
LanSafe software is included free of charge
Service plans
Product
5110 500-1500 VA
5110 500-1500 VA
Length of service
Three years Five years
Replacement batteries
Model number
PW5110 500 VA PW5110 700 VA PW 5110 1000 VA
PW5110 1500 VA
Part number
106711159-001
106711160-001
106711161-001
106711162-001
Gold Plan part number
3XXGX5100XALLCX 5XXGX5100XALLCX
Description
BATT. KIT 500 VA PW5110
BATT. KIT 700 VA PW5110
BATT. KIT 1000 VA PW5110
BATT. KIT 1500 VA PW5110
1. Specifications are subject to change without notice due to continuing product improvement programs.
www.eaton.com/powerquality 1.800.356.5794
3
5110 North American models: 120V, 50/60 Hz
Model
PW5110
PW5110
PW5110
PW5110
500
700
1000
1500
Part number
103004256-5591
103004257-5591
103004258-5591
103004259-5591
Power out (VA/Watt)
500/300
700/420
1000/600
1440/900
Input connection
1.8m line cord
with 90 deg. 5-15P
1.8m line cord
with 90 deg. 5-15P
1.8m line cord
with 90 deg. 5-15P
1.8m line cord
with 90 deg. 5-15P
Output receptacles
(8) 5-15R outlets*
Dimensions (H x W x D, inches) Weight(lb)
10.6 x 3.4 x 10.2
12.1
(8) 5-15R outlets*
10.6 x 3.4 x 10.2 15.2
(8) 5-15R outlets*
10.6 x 3.4 x 15.1
28.0
(8) 5-15R outlets*
10.6 x 3.4 x 15.1 29.1
Output receptacles
(8) IE C13 outlets*
Dimensions H x W x D (inches) Weight (lb)
10.6 x 3.4 x 10.2
13.4
(8) IE C13 outlets*
10.6 x 3.4 x 10.2
16.5
(8) IE C13 outlets*
10.6 x 3.4 x 15.1
29.1
(8) IE C13 outlets*
10.6 x 3.4 x 15.1
30.2
5110 International models: 230V, 50/60 HZ
Model
PW5110
PW5110
PW5110
PW5110
Part number
500i 103004261-5591
700i 103004262-5591
1000i 103004263-5591
1500i 103004264-5591
Power out (VA/Watt)
500/300
700/420
1000/600
1500/900
Input connection
IEC C14 inlet, 1.8 meter
line patch cord IEC to IEC
IEC C14 inlet, 1.8 meter
line patch cord IEC to IEC
IEC C14 inlet, 1.8 meter
line patch cord IEC to IEC
IEC C14 inlet, 1.8 meter
line patch cord IEC to IEC
* Four battery backup & surge protection; four surge protection only.
5110 battery backup times (in minutes)
Load (VA)
500
700
30W
52
63
60W
35
46
90W
22
34
Load (VA)
1000
1500
120W
52
62
180W 240W
35
23
43
29
120W 150W 180W
14
11
8
23
16
12
210W
6
10
240W
5
8
270W
4
7
300W
3
6
330W
-
5
360W 390W 420W
-
-
4
4
3
300W 360W 420W
17
13
10
20
16
14
480W
9
12
540W
7
11
600W
5
9
660W
-
8
720W
-
7
780W 840W 900W
-
-
6
5
4.4
Note: Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
UNITED STATES
8609 Six Forks Road
Raleigh, NC 27615 U.S.A.
Toll Free: 1.800.356.5794
www.eaton.com/powerquality
Canada
Ontario: 416.798.0112
Toll free: 1.800.461.9166
LATIN AMERICA
Argentina: 54.11.4124.4000
Brazil: 55.11.3616.8500
Caribbean: 1.949.452.9610
Mexico & Central America:
52.55.9000.5252
South Cone: 54.11.4343.6323
Europe/Middle East/Africa
Denmark: 45.3686.7910
Finland: 358.94.52.661
France: 33.1.6012.7400
Germany: 49.0.7841.604.0
Italy: 39.02.66.04.05.40
Norway: 47.23.03.65.50
Portugal: 55.11.3616.8500
Sweden: 46.8.598.940.00
United Kingdom: 44.1753.608.700
Asia Pacific
Australia: 61.2.9693.9366
New Zealand: 64.0.3.343.3314
China: 86.21.6361.5599
HK/Korea/Taiwan: 852.2745.6682
India: 91.11.2649.9414 to 18
Singapore/SEA: 65.6825.1668
Eaton, Powerware, LanSafe and
PowerChain Management are trade names,
trademarks and/or service marks of Eaton
Corporation or its subsidiaries and affiliates.
All other trademarks are property of their
respective owners.
©2009 Eaton Corporation
All Rights Reserved
Printed in USA
5110FXA
April 2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement